Entries in Accessory,Revolver

ASG CZ 75 P-07 DUTY and Dan Wesson 6 & 8 inch Revolvers Now Shipping

10 Comments

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Pistol, Replica Airguns News, Revolver, Semi Auto Tags: ASG, CZ 75 P-07 Duty, Dan Wesson

Safe Air and Blank Gun Storage Unit On a Budget

No Comments

I ran out of room for all my air guns and blank guns in my gun locker a while ago and so I have been on the lookout for a safe way to keep my air and blank guns secured and out of reach.

I have two little kids and I do make a point to keep an unloaded air gun around for them to check out and get used to, (so it's not such a big deal down the road for them). I have started to at least make them aware of what guns are and not to handle guns unless an adult is around and says it's OK. I want them to know early on that guns can be very dangerous when used the wrong way. But thats' another article on it's own!

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I have been considering another gun locker or safe but they can be very expensive and are usually limited in size, especially if you're looking for an inexpensive one. In Canada, air guns and non-prohibited blank guns don't technically legally need to be locked in a gun safe or gun cabinet but personally I still feel the need to keep my air and blank guns locked up to some degree. So I thought, what about some sort of a lockable storage or utility cabinet?

I finally came across what I think is an excellent solution and it didn't cost me an arm and a leg! I went with an upright utility cabinet from Black & Decker (SpaceAir Collection). Mine is 70 inches tall, 15 inches deep, and 27 inches wide. It's made out of sturdy plastic and most importantly it's lockable!

I went with a pretty large utility cabinet as I have lots of air and blank guns but if you have a small to medium air and blank gun collection, you could always get the half size shorter version of this type of unit.

My Vimeo Video showing my Air and Blank Gun Storage solution:

Categories: Accessory, Gun Safety, Replica Airguns News, YouTube Video Tags:

ASG CZ 75 P-07 DUTY and Dan Wesson 6 & 8 inch Revolvers coming soon!

12 Comments

Related Posts:

I am really excited to let you in on some more Replica Airguns Store news. We have some really nice Air guns from ASG on order, I don't just yet have an ETA on when they will be here but should know in a little while...

First off we have the ASG CZ 75 P-07 Duty in Blowback Dual Tone:

"The CZ 75 P-07 DUTY is the new generation of the CZ 75 family which was first designed back in 1975 by the famous small arms manufacturer Česká zbrojovka, Czech Republic. This is the semi automatic 4.5mm (.177) airgun version fully licensed by CZ. It is powered by a 12g CO2 cartridge stored in the grip using the easy-load system and the BB’s are put in the drop-out magazine. The CZ 75 P-07 DUTY is a compact tactical upgraded version compared to the standard CZ 75. Besides being more compact in size the P-07 DUTY has an integrated front waiver rail for mounting light and laser. The grip and metal slide carries authentic CZ markings and every gun comes with unique serial number."

  • Length: 7.3 inches.
  • Weight: 1.8 pounds.
  • Magazine: 4.5mm BB's x 20.
  • FPS: 361.

We also have on order some ASG Dan Wesson Revolvers in 6 inch Nickel and 8 inch Black barrel Versions:

"The legendary semi automatic revolver licensed by Dan Wesson – 6” silver and 8 inch black versions. The revolver has authentic markings and an individual serial number stamped into the frame. The revolver features a double action trigger system and adjustable rear sight for extra realism and accuracy. The Dan Wesson revolver is made of metal except for the ergonomical grip constructed in hard ABS plastic.

The 12g CO2 cartridge is stored under the grip and is easily accessed by sliding the grip to the side – easy-load style. Each of the 6 cartridges holds one BB and is placed in the metal drum that rotates as each round is fired. The revolver comes with a speed loader, changeable tactical rail and 6 cartridges."

  • Length: 11.7/13.3 inches.
  • Weight: 2.25/2.3 pounds.
  • Magazine: 4.5mm BB's x 6.
  • FPS: 426.

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Pistol, Replica Airguns News, Revolver, Semi Auto Tags: ASG, CZ 75 P-07 Duty, Dan Wesson

Umarex CX4 Storm gets some new toys - 3x9x40 Scope and Foregrip

2 Comments

Related Posts:

My scope mounting hardware came in today and I got right to work adding my new Aim 3x9x40 Rubber Scope and Foregrip to it. I wasn't planning on putting on the Foregrip, it just kind of happened and it looks good, so it may just stay on the CX4?

I ordered a Picitinny/Weaver Deluxe Riser Mount because I wasn't sure if the scope would clear the built in sites and I was thinking I wanted to mount the 3x9x40 Scope toward the rear but as it happened my high rise ring mounts where already the perfect hight and the Picitinny/Weaver Deluxe Riser Mount I ordered wasn't required!

Guess I'll have to shelf the Riser Mount for another project, I'm sure one day it will come in handy.

Some more pictures of the new setup:

Categories: 4.5mm / .177 cal, Accessory, Blowback, Pellet, Rifle, Scope, Semi Auto Tags: Beretta, CX4 Storm, Umarex

A few new Accessories - Red Dot - Scope - Foregrip

3 Comments

I have been wanting to get a suitable scope for my Umarex CX4 Storm for a while but have been busy with the Holliday Season, today I made it out to Panther Paintball, a local paint ball store in my area to see what they had in stock. Sometimes I find paintball stores have a better air gun accessory selection then even many full fledged sporting goods stores that sell guns?

I was in luck because they had some good deals going on, one of which was a nice 3x9x40 Rubber Coated Scope made by AIM SPORT INC.

The only problem I had is that it did not have the right mounts for my CX4, it came with mounts for an M16 Carry Handle instead. So I added a Deluxe Riser Mount and some High Profile Picitinny/Weaver 30MM Rings - Problem solved!

I also have another rifle coming next week that I want to add a Foregrip and Red Dot Scope to, again Panther Paintbally had a 1x42 Red Dot Scope made by AIM SPORT INC. that was on sale and just what I was looking for.

Lastly, I found a Foregrip much like the one I have on my Steel Storm but without the Tactical Flashlight built in. I didn't really need the light on this new gun anyways.

Now I'm set for next week when I hope to get all the parts I need and of course my new rifle...

Categories: Accessory, Scope Tags: CX4 Storm

Steel Storm Bulk Air-CO2 Adaptor

1 Comment

I just noticed that you can get Bulk Air-CO2 Adaptors on Amazon via a company called "Air Venturi". They have them for the Steel Storm, the Drozd and the Blackbird. The Blackbird one actually doubles as a stock mount for your CO2 or Bulk Air Tank.

 

Buy this gun in Canada   -   Buy this gun in the US

Categories: 4.5mm / .177 cal, Accessory, BB, Bulk Air, CO2, Full Auto, Semi Auto Tags: Baikal, Bulk Air, Drozd, Drozd-Blackbird, Steel Storm

Zoraki 914 & R1 9mm and Kimar Lady K 8mm Blank Gun Test Fire

No Comments

Related Posts:

Below is my Vimeo Video of the Zoraki Mod.914Zoraki Mod.R1 (2.5) and Kimar Lady K Blank

Guns. I fire 9mm and 8mm P.A.K blank ammunition through these guns and even show off the Zoraki Mod.914 in full auto firing mode. In the Vimeo Videos I also slow down the video to one-quarter speed so you can really see the action of these blank guns.

Zoraki Mod.914

  • 9mm P.A.K. Ammunition

  • 14 Round Magazine

  • Semi & Full Auto Modes

  • Front Muzzle Firing

Zoraki Mod. R1

  • 9mm P.A.K. Ammunition

  • 6 Round Capacity

  • Single & Double Action

  • Front Muzzle Firing

Kimar Lady K

  • 8mm P.A.K. Ammunition

  • 6 Round Magazine

  • Semi Auto Only

  • Top Muzzle Firing

Here is the Vimeo Video of my Zoraki 914, R1 and Kimar Lady K Blank Gun Test Firing:

Blank gun.jpg
Categories: 8mm, 9mm, Blank Gun, Full Auto, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: 914, Kimar, Lady K, R1, Zoraki

ZORAKI R1 (2.5) 9mm P.A.K. BLANK REVOLVER REVIEW

12 Comments

Related Posts:

Type: Blank Gun.

Manufacturer: Zoraki - Atak Arms.

Model:Zoraki R1 2.5.

Materials: All metal with plastic grips.

Weight: 1.7 pounds.

Barrel: 2.5 inches, semi plugged - front firing.

Propulsion: Gun powder.

Action: Single and double action.

Ammunition Type: 9mm P.A.K. or 380 R Blanks.

Ammunition Capacity: 6 rounds.

FPS: N/A.

Trigger Pull: The trigger pull is good overall, even in double action mode it is smooth and not too heavy, in single action mode it is even lighter and shorter.

Accuracy: NA.

Build Quality: The overall build quality of this gun is very good. The design and materials all seem to be good quality. The cosmetics look good but when closely inspected there are small imperfections such as tool marks and some finishing blemishes. Not a big deal but if you are picky about this kind of thing then it may turn you off a bit.

Realism: This gun in theory is not supposed to be a replica of any gun in production but it does resemble many common snub nosed revolvers available such as the Rossi Snub Nosed Revolvers. It would be hard to tell the difference between the Zoraki R1 and a real snub nosed revolver even side by side. The only real tell tale sign would be if you looked at the front of the cylinder, you may notice the front bullet ports are smaller than they should be, more like a 22 caliber. The Zoraki looks and feels like a real gun, so make sure to take precautions when using this blank revolver!

Purchased From:CanadaAmmo.com.

Pros:

  • In Canada it is one of the few Blank guns available for purchase that is not prohibited.

  • All metal construction, with the exception of the grips.

  • Attractive styling, many finishing options available.

  • Well priced.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

  • Finishing detail could be better.

  • Pistol grips are hard plastic, would be better in rubber.

  • 9mm P.A.K. Blank ammo is expensive.

Comments:

The Zoraki R1 (2.5) is a nice addition to my Replica gun collection, if you are a Canadian then there are few options available to us if you want to legally own a Blank shooter. I do like the look of this Zoraki snub nosed revolver, especially in the two-tone configuration that I purchased. I'm not sure of the availability of Zoraki gun in other parts of the world but in the US there is another Snub Nosed Revolver that is virtually identical, made by the company Viper for about $99.

My Vimeo Video Review for this Airgun:

Categories: 9mm, Blank Gun, Pistol, Review, Revolver, Semi Auto, YouTube Video Tags: R1

Zoraki R1 (2.5) Blank Revolver Arrives!

8 Comments

Related Posts:

WOW! That was fast shipping from CanadaAmmo.com!!! I ordered my Zoraki R1 (2.5) Blank Revolver on Tuesday the 28th and got it today the 30th! I got my tracking number today expecting it to have an estimated arrival day sometime next week and when I checked it out it said it was already at the post office waiting for me. I don't know exactly where CanadaAmmo.com is located but from my tracking info it looks like they may be located somewhere in Vancouver BC which is very close to where I live.

I will be posting a more thorough review with Video hopefully sometime next week on the Zoraki R1 (2.5) Blank Revolver but for now I wanted to give you my first impressions with a few photos.

The gun comes in a nice box wrapped inside a plastic bag to keep the other accessories from scratching it along the way. Mine was pretty greasy and needed a wipe down and then a re-oil but that's better than dry and rusty any day. Inside the case there is a manual, a cleaning rod and a flare adaptor. I was also pleasantly surprised to see that CanadaAmmo.com gave me a FREE pack of targets (with their marketing on it of course).

The gun looks great and I love the two-tone Satin/Black finish that I selected. Mine had a few tool marks on it but over all it's not bad and I am sure it will get more marks along the way...

The gun is a good size and weight, not huge or not small either. It does not feel cheap and looks more like a real gun than a blank gun. The Canadian Zoraki R1 (2.5) Blank Revolver discharges out of the front of the barrel like my other Zoraki Mod.914 which is always very nice and more realistic.

The Zoraki R1 uses 9mm blanks and can take the standard 9mm P.A.K rounds but they seem a bit loose and may not eject properly. I believe the right ammo to use would be the Crimped Blank 9mm rounds which I do not have. (If anyone knows where I can get some 9mm crimped blanks in Canada please let me know?)

I look forward to shooting this well made Zoraki Blank gun sometime in October amongst the other Halloween explosions...

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Categories: 9mm, Blank Gun, Pistol, Revolver, Semi Auto Tags: R1, Zoraki