Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN - KWC MINI UZI BB GUN FULL AUTO MODIFICATION

• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

Type: BB air pistol.

Manufacturer: Cybergun.

Model: Mini UZU.

Materials: Metal and Polymer.

Weight: 4.8 pounds.

Barrel: Metal, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto (Selectable Full Auto with Mod) blowback, single action only.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 25 rounds

FPS: 344

Trigger Pull: The trigger pull is very light with an easy break.

Accuracy: Very good, even with all the heavy blowback recoil!

Build Quality: Excellent, with a good amount of metal construction, good weight and craftsmanship with good fit and finish. Much of the gun is made out of metal with the exception of some of the outer receiver and grips.

Realism: This is a very close replica of the actual real steel with many of the same markings in all the right places, It's hard to find any real differences other than the fact that it shoots 4.5mm BB's and has a bit more plastic.

Pros:

• Extremely realistic airgun replica of the Mini UZI.

• Metal construction where it counts.

• Would make an excellent training gun as it functions just like a real Mini UZI.

• Blowback action is incredibly firm (more than a rimfire 22 cal.) adding to the realism of shooting this weapon.

• Can be easily field striped.

• Can be easily modified to fire in either Semi Auto or Full Auto by removing one small plastic blockage.

• Adjustable sights.

• Very useful metal folding stock.

Cons:

• It goes through CO2 very fast.

• When the magazine is empty, the slide bolt does not stay open and the gun will continue to fire waisting CO2.

• Some of the outer materials are plastic, would have been nice if they too where metal construction.

Comments:

This is a really nice blowback BB gun. Although it is advertised on many websites as being all metal, it does have some plastic outer parts, but the parts that get the most wear and tear are made out of metal. That aside, the Cybergun Mini UZI is pretty much an exact copy of the real Mini UZI with many of the same markings as the original. One feature that makes it feel even more genuine is the very heavy blow back recoil, it is alarming at first and I would even say it has more recoil than a rimfire 22 cal. gun does. It only comes in a semi auto version but all Cybergun did to inhibit full auto mode was to simply add a plastic nub that stops the fire selector switch from being selected to full auto. Once this plastic nub is removed, full auto mode is resorted. This well made BB gun is a bit pricy but you get a lot of gun for your money!

Buy this gun in Canada

Buy this gun in the US

This Article was graciously provided by one of my viewers: Lee

Related Posts:

• SIG SAUER X-FIVE STAINLESS STEEL VERSION

DISCLAIMER, PLEASE READ AND UNDERSTAND!

• This walkthrough is for information purposes ONLY, if you decide to dismantle your BB gun you will void any warranty you have with the manufacturer.
•  I will not be held accountable for your actions or any damage that is caused by your negligence. Therefore, if YOU decide to dismantle your BB gun and break something during the dismantling or assembling it is your problem not mine.
• If you don’t feel confident or comfortable doing any of these steps STOP and do not proceed any further or you may do damage.
• YOU WILL LOOSE ALL THE SIG SAUER MARKINGS ON THE GUN.

Having said all that, this is my first ever instructional so I’m going to try and make this walkthrough as easy as I can for you to understand. You will need the following: Flat tip Screwdriver for the grips, Small Philips Head screwdriver, small punch & needle nose pliers – the last 2 are optional.

Make sure you have a clean work space and lay out every part in the order that you remove it Left to Right, come reassembly time you work Right to Left it makes reassembly so much easier.

Step 1:

Field Strip the slide until it looks like this:

Unscrew these 2 screws, these hold in the “Breech Block” once your unscrewed cup the end of the slide in your hand and let the Breech & Screws fall in your hand – Set these aside.

That’s it your Slide should look like this:

It is now ready for paint removal.

Step 2:

Take the Frame and start removing the grips Left hand side first:

Flip the frame over and remove the right hand side grips:

Carefully remove the trigger return spring, it is under tension and it WILL fly across the room – I spent an hour looking for it one day! Also while we are at it, you can remove the cover to the magazine release.

To remove the safety, place your flat tip screwdriver between the frame and the safety and twist ever so gently this will separate the safety and all you need to do now is grab the safety from either side and gently pull & wiggle until it separates.

Once the safety is removed you will see the safety bar, this lifts off.

Step 3:

Lift this little pin out and remove the spring, very carefully push this pin from the other side and remove, be careful because once this happens your hammer assembly is loose and free from the frame.

Slowly and gently remove the hammer assembly:

Note the little shiny piece that sits on the side of the hammer assembly, try very hard not to let this piece fly out, it is a pain to get back in, if it does fly out keep calm and take your time, don’t force the little spring in, it seats in behind the shiny metal thing – sorry I don’t have a proper name for it.

Also make sure that the spring next to it is in the locked open position, if it snaps back just get the tip of a small screwdriver and slide it to the left until it locks.

The hammer return spring assembly at the back of the grips can be removed and set aside.

Removing the trigger assembly is easier than it looks; you need to remove the takedown lever by rotating it counter clockwise until it stops.

Push it through the frame and rotate it back clockwise to remove it all together.

Remove the screw holding the trigger assembly:

Lift out the trigger assembly; be careful of the slide lock spring it wont Fly out, but it will fall out.

If you want to remove the magazine release, there is a spring that sits at the rear of the trigger guard;

Push the magazine release in part way & with the flat tip screwdriver lifts the up to remove it, once removed the magazine release will simply fall out.

THAT’S IT! We’re done, ready for the paint removal. Any paint stripper is fine.

KEEP IT WELL AWAY FROM THE PLASTIC PARTS!

Follow the manufacturer’s guidelines for use of their product and thoroughly clean the slide and frame after you have removed the paint.

YOU WILL LOOSE ALL THE SIG Sauer MARKINGS ON THE GUN.

Rub over the slide and frame with #0000 Steel wool or 1200 grit Wet & Dry paper. Clean again and using the paper or steel wool with some ALUMINUM polishing compound like Autosol and some good ol fashioned elbow grease polish the slide and frame until you reach your desired outcome. Clean it all down again and wipe it down with a rag that has had gun oil or my preference “Fluid Film”.

Reassemble the gun in the reverse order and viola one shiny SIG Sauer X-Five.

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• CYBERGUN MINI UZI BB GUN REVIEW
• CYBERGUN - KWC MINI UZI BB GUN FULL AUTO MODIFICATION
• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

I have been holding off and holding off on this gun for a while now but I just can't wait any longer! So today I finally ordered up a Full Metal UZI Blowback CO2 .177 BB Gun from the Air Gun Source here in Canada.

I'm not 100% sure who makes this full metal replica UZI BB gun but I believe it may be the Cybergun version. There seems to be identical version distributed by "Armist Industries" and "KWC", when it comes I should have more info about it. This UZI is stated to be "Full Metal" but I have heard conflicting stores and again when I get it I will update you on the quality of this nice UZI Blowback BB Gun.

These guns ship with a selector switch that has three positions: (A-R-S), one is the safety and the other two are semi-auto only. This gun does not ship with a full-auto feature but I have a  source who has converted his to full auto and he is sharing this information with me shortly. I plan to mod mine so it has a selectable semi auto and full auto.

This gun is reported to have a very heavy blow back action with significant shoulder kick for a BB gun. Sounds like fun! It has also been chronographed at 390 FPS! And it even comes with a folding Stock.

Here are some basic stats for you until I do my full review...

• 344 FPS*OUR TESTS SHOW 390 FPS!
• Full metal
• Blowback action
• Semi-auto
• Removable 25 round magazine
• Foldable metal stock
• Uses one 12g CO2 cartridge
• .177 calibre (4.5mm) BB's
• Length: 14"
• Weight: 4.85 lbs
• 30 Day Warranty
• Made in Taiwan

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• SIG SAUER X-FIVE P226 TAKE DOWN FOR STRIPPING AND PAINTING

One of my viewers (Lee) sent me some pictures of their Cybergun Sig Sauer X-Five BB gun that he stripped down to the bare metal. His had some of the paint flake off so he decided to take it down to bare metal. It looks pretty good and he says with some of his "secret" metal oil on it, it stays rust free.

Here are some picts of it:

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• ZORAKI 914 AND KIMAR LADY K BLANK GUN REVIEW

• ZORAKI R1 (2.5) BLANK REVOLVER ON ITS WAY...

• ZORAKI R1 (2.5) BLANK REVOLVER ARRIVES!

• ZORAKI R1 (2.5) BLANK REVOLVER REVIEW

• REPLICA BLANK GUNS

• BLANK GUN CANADIAN LAWS

Below is my Vimeo Video of the Zoraki Mod.914, Zoraki Mod.R1 (2.5) and Kimar Lady K Blank

Guns. I fire 9mm and 8mm P.A.K blank ammunition through these guns and even show off the Zoraki Mod.914 in full auto firing mode. In the Vimeo Videos I also slow down the video to one-quarter speed so you can really see the action of these blank guns.

Zoraki Mod.914

• 9mm P.A.K. Ammunition

• 14 Round Magazine

• Semi & Full Auto Modes

• Front Muzzle Firing

Zoraki Mod. R1

• 9mm P.A.K. Ammunition

• 6 Round Capacity

• Single & Double Action

• Front Muzzle Firing

Kimar Lady K

• 8mm P.A.K. Ammunition

• 6 Round Magazine

• Semi Auto Only

• Top Muzzle Firing

Here is the Vimeo Video of my Zoraki 914, R1 and Kimar Lady K Blank Gun Test Firing:

Buy Blank Guns in Canada 

Buy Blank Guns in the US

You may be surprised to know that the Airgun that started off my collection was purchased only about 4 years ago. As a kid I had a few Airguns growing up and then suddenly in my late 30's I just picked it up again. Anyways the Airgun this post is focusing on is the Umarex Walther CP99 Compact. This post is not intended to be a review but in summary the CP99 Compact BB Blowback BB gun has one of the nicest trigger pulls in my collection. It is so much fun to shoot, it's very well made and is reasonably priced.

The one feature,or lack of a feature that I never really like about the Umarex CP99 Compact was the molded ejection port. In other words the ejection port is not cut out of the slide on this gun but instead is molded into the slide to look like an ejection port.

That said I have noticed a few of these Umarex CP99 Compacts sporting a cut out ejection port and so I thought to myself that maybe people have been cutting the ejection port out themselves? Hey I thought about giving it a try several times myself. So I took a walk over to the Umarex US website and low and behold if you click on the 360 view, you will see that it too has a cut out ejection port. The photos on their site do not show this new feature but rather the older molded version. I can not confirm that all new CP99 Compacts will in fact have the cut out ejection port, but it does look like Umarex has moved to this updated version…

So I thought enough is enough! It's time to pull out my tools and cut into my beloved CP99 BB gun. The best way to show you what transpired next is with a series of photos. At the end of about 2 hours of work I have to say I am very happy with the end result!

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• ZORAKI R1 (2.5) BLANK REVOLVER ON ITS WAY...

• ZORAKI R1 (2.5) BLANK REVOLVER ARRIVES!

Type: Blank Gun.

Manufacturer: Zoraki - Atak Arms.

Model:Zoraki R1 2.5.

Materials: All metal with plastic grips.

Weight: 1.7 pounds.

Barrel: 2.5 inches, semi plugged - front firing.

Propulsion: Gun powder.

Action: Single and double action.

Ammunition Type: 9mm P.A.K. or 380 R Blanks.

Ammunition Capacity: 6 rounds.

FPS: N/A.

Trigger Pull: The trigger pull is good overall, even in double action mode it is smooth and not too heavy, in single action mode it is even lighter and shorter.

Accuracy: NA.

Build Quality: The overall build quality of this gun is very good. The design and materials all seem to be good quality. The cosmetics look good but when closely inspected there are small imperfections such as tool marks and some finishing blemishes. Not a big deal but if you are picky about this kind of thing then it may turn you off a bit.

Realism: This gun in theory is not supposed to be a replica of any gun in production but it does resemble many common snub nosed revolvers available such as the Rossi Snub Nosed Revolvers. It would be hard to tell the difference between the Zoraki R1 and a real snub nosed revolver even side by side. The only real tell tale sign would be if you looked at the front of the cylinder, you may notice the front bullet ports are smaller than they should be, more like a 22 caliber. The Zoraki looks and feels like a real gun, so make sure to take precautions when using this blank revolver!

Purchased From:CanadaAmmo.com.

Pros:

• In Canada it is one of the few Blank guns available for purchase that is not prohibited.

• All metal construction, with the exception of the grips.

• Attractive styling, many finishing options available.

• Well priced.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Finishing detail could be better.

• Pistol grips are hard plastic, would be better in rubber.

• 9mm P.A.K. Blank ammo is expensive.

Comments:

The Zoraki R1 (2.5) is a nice addition to my Replica gun collection, if you are a Canadian then there are few options available to us if you want to legally own a Blank shooter. I do like the look of this Zoraki snub nosed revolver, especially in the two-tone configuration that I purchased. I'm not sure of the availability of Zoraki gun in other parts of the world but in the US there is another Snub Nosed Revolver that is virtually identical, made by the company Viper for about $99.

My Vimeo Video Review for this Airgun:

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Related Posts:

• ZORAKI R1 (2.5) BLANK REVOLVER ON ITS WAY...
• ZORAKI R1 (2.5) 9MM P.A.K. BLANK REVOLVER REVIEW

WOW! That was fast shipping from CanadaAmmo.com!!! I ordered my Zoraki R1 (2.5) Blank Revolver on Tuesday the 28th and got it today the 30th! I got my tracking number today expecting it to have an estimated arrival day sometime next week and when I checked it out it said it was already at the post office waiting for me. I don't know exactly where CanadaAmmo.com is located but from my tracking info it looks like they may be located somewhere in Vancouver BC which is very close to where I live.

I will be posting a more thorough review with Video hopefully sometime next week on the Zoraki R1 (2.5) Blank Revolver but for now I wanted to give you my first impressions with a few photos.

The gun comes in a nice box wrapped inside a plastic bag to keep the other accessories from scratching it along the way. Mine was pretty greasy and needed a wipe down and then a re-oil but that's better than dry and rusty any day. Inside the case there is a manual, a cleaning rod and a flare adaptor. I was also pleasantly surprised to see that CanadaAmmo.com gave me a FREE pack of targets (with their marketing on it of course).

The gun looks great and I love the two-tone Satin/Black finish that I selected. Mine had a few tool marks on it but over all it's not bad and I am sure it will get more marks along the way...

The gun is a good size and weight, not huge or not small either. It does not feel cheap and looks more like a real gun than a blank gun. The Canadian Zoraki R1 (2.5) Blank Revolver discharges out of the front of the barrel like my other Zoraki Mod.914 which is always very nice and more realistic.

The Zoraki R1 uses 9mm blanks and can take the standard 9mm P.A.K rounds but they seem a bit loose and may not eject properly. I believe the right ammo to use would be the Crimped Blank 9mm rounds which I do not have. (If anyone knows where I can get some 9mm crimped blanks in Canada please let me know?)

I look forward to shooting this well made Zoraki Blank gun sometime in October amongst the other Halloween explosions...

Buy Blank Guns in Canada   -   Buy Blank Guns in the US

Related Posts:

• CYBERGUN GSG 92 ON ITS WAY!

• CYBERGUN GSG 92 BB GUN REVIEW

• CYBERGUN GSG 92 BB GUN FIELD TEST

This video is not really a review but rather an instructional video on how to modify a Cybergun GSG 92 Blowback BB Airgun to shoot not only in single shot (Semi Auto), but to also have the ability to shoot in Full Auto mode with the flick of the safety to the down position. (Warning - This Mod will most certainly void your warranty!)

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

This Modifications of the Cybergun GSG 92 is a rather simple operation, all that is needed is to remove the slide and take off the right side grip, then remove a small internal piece and file it down slightly on one end. Put everything back together and away you go. Shoot in Semi Auto or Full Auto whenever you like!

I'll be doing a Review and Field Test on it shortly...

Buy this gun in Canada

Buy this gun in the US

Related Posts:

• TWO NEW AIRGUNS - UMAREX PPK/S AND UMAREX BERETTA ELITE II
• UMAREX WALTHER PPK/S BLOWBACK CO2 BB PISTOL REVIEW

This is a video I posted on YouTube a while back that has gotten a lot of views (Now Over 300,000). It's basically me and a friend shooting a couple of guns. The first set of guns (One in each hand - Tomb Raider Style) are two Walther CP99 Compacts made by Umarex. The CP99 Compact is a great little BB gun with a very fast and light trigger pull.

Next up is another Umarex product, a Walther PPK. This one is moded to fire Full Auto, making it one of the smallest Full Auto BB Guns. Too bad it's all over so fast! I'll look at doing some proper reviews of these fine Airguns down the road...

Buy this gun in Canada   -   Buy this gun in the US

Buy this gun in Canada   -   Buy this gun in the US