Type: Airsoft.

Manufacturer:King Arms.

Model:Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

If you haven't already checked out my King Arms Colt M4A1 Table Top Review, make sure to do so for all the details and specifications on the King Arms Colt M4A1 Airsoft AEG Carbine.

This Field Test Review focusses primarily on how the AEG  M4A1 performs in feet per second velocity using .25 gram plastic Airsoft BB's, its accuracy in both semi and full auto and of course my comments on it's shoot-ability and overall performance.

For this field test review of my King Arms M4A1 Airsoft rifle I switched from the .20 gram Airsoft BB's to heavier .25 gram plastic BB's. I did this to have a comparison between the two weights since I had already Chronographed and accuracy tested the .20 gram BB's. As expected the fps dropped a bit, down to around 380 fps but still stayed very consistent for me as would be expected with an AEG styled rifle.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Another reason I wanted to test out the heavier .25 gram Airsoft BB's is because generally speaking, heavier BB's will shoot a bit more accurately as they are not as effected by the higher fps this guns is capable of shooing. The .20 gram BB's actually did well so I had high expectation for the .25 gram BB's and I was not disappointed! For this test I shot the King Arms Colt M4A1 from 30 feet out in a semi rested position (rested on a sand bag in the front and standing in the back). I shot 10 rounds in semi auto and got a very respectable 1.5 inch group which rivals any airgun in my collection! I also shot in full auto (I can't really tell you how many rounds ;) and the King Arms Colt M4A1 punched a nice 2 inch hole in the target. I would almost say it even beat out my other full auto 4.5mm steel BB shooting guns in terms of how tight of a group it can shoot while in full auto mode.

I am sure the Airsoft Hop-up system has something to do with the accuracy as the back-rotating BB's should keep a truer trajectory. One thing I notice while shooting this AEG styled Airsoft rifle, is that there is a slight delay from the time you pull the trigger till the shot is released. The trigger is actually activating a motor which in turn pulls the internal spring back, which then releases it once it hits the end of it's cycle. It's not a long delay but it is noticeable. In full auto it really does not matter at all :)

All in all I am again impressed with what an Airsoft gun can do in terms of both looks and performance.

My Vimeo Field Test Review for the King Arms Colt M4A1 6mm AEG Airsoft Carbine:

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Type: Airsoft.

Manufacturer:Western Arms (WA).

Model:Shorty 40.

Materials: Polymer & Metal.

Weight: 1.7 pounds.

Barrel: 3 inches, metal.

Propulsion: GBB

Action: Semi auto, single & double action.

Ammunition Type: 6mm plastic BB (recommended .20 gram).

Ammunition Capacity: 20 round magazine.

FPS: 260-270.

Trigger Pull: The trigger pull on the Western Arms Smith & Wesson Shorty 40 is very light in both single and double action but of course the lightest when shooting in single action mode. The single action is short with next to no reset making for very quick followup shots. If you have de-cocked the gun using the de-cocker, you may find it hard to re-cock again as there is no exposed hammer to grab. You will need to pull the trigger just a bit to expose the hammer and then pull it back the rest of the way as per normal.

Accuracy: This is now the third Airsoft gun I have tested and I always assumed Airsoft guns would not be nearly as accurate as my metal BB shooters but again I have been proven wrong! The WA S&W Shorty 40 even with its short 3 inch barrel got a nice 2 inch group my first time testing it out from 20 feet out in a free standing position. And 4 shots got right in the bullseye! Considering this Airsoft gun was supposed to be non-working, it worked pretty good for me!

Build Quality: When you first pickup the Western Arms Smith & Wesson Shorty .40, you immediately think it is an all metal gun since it's all black and has really good weight to it sitting in at 1.7 pounds and in a very small package. On close up inspection the WA Shorty 40 has a lot of plastic in it including the slide and the frame. Polymer frames are not uncommon and to be honest if the gun looks and feels like metal but is actually plastic, there are some benefits. This review model being used has seen some action but it looks pretty much like a brand new gun, the reason being is because of the plastic exterior - in general, plastic is not painted but rather the color is throughout the material so it will not rub off or show a scratch nearly as much as a painted or blued finishe which will show the grey metal underneath. And to be fair, my Western Arms Shorty 40 has lots of high quality metal parts where they really need to be like the magazine, magazine release, slide catch, trigger, hammer, barrel and many other internal parts.

Realism: From looking at photos of the real Smith & Wesson Shorty 40, I can say the Airsoft version is a dead ringer. The Western Arms version has all the markings and and licensing in all the right places and from what I can tell without actually having used the real steel version, it seems to function and even field strip like the real .40 caliber model. The only real telltale sign are the plastic parts but as I said before it is very hard to tell because of this Airsoft guns heavy weight.

Purchased From: Used.

Pros:

• I got this one as a bargain ($50) to say the least.

• Very realistic replica with full licensing.

• Seems to be very accurate for a short barreled Airsoft pistol.

• Decent FPS for a compact GBB Airsoft gun.

• Even thought the frame and slide are polymer, it has very good weight and feel to it.

• Everything works like the original, field strips and most mechanical parts are metal.

• Safety also works as the de-cocker.

• Adjustable rear sight for windage.

• Very nice light single and double action trigger.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Hard to find this one, not in production as far as I know?

• Plastic slide and frame but still very high quality.

• Seems to go through gas fast - 20 BB's and it's done!

Comments:

For those of you who have been a bit down on the Airsoft guns I have been reviewing, maybe you just haven't put your hands on the right ones so far? I am now on my third Airsoft product review and I have received all kinds of comments from people ranging from very positive to very negative, with some people comparing Airsoft guns to kids toys. The funny thing is it's all about perspective - people who only shoot powder burners will say an Airgun is a toy but again many powder burner shooters also shoot airguns for economical and practical reasons. I think we should respect peoples interest and if it's not for you then stick with what is for you but at least first give it a chance. I plan to take part in some Airsoft games so this is a great time for me to see what Airsoft guns I like and will work well once I get in a battle situation. Now getting back to the Western Arms Smith & Wesson Shorty 40 at hand... It is a pleasure to shoot and for a "Broken" gun it sure works well, I wonder what a new pristine condition one would shoot like? It's hard for me to tell you to go out and buy one since they are not readily available but if you do manage to come across one, grab it if you can!

My Vimeo Video Review for the Western Arms Smith & Wesson Shorty 40 Airsoft Pistol:

Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

Type: Airsoft.

Manufacturer:King Arms.

Model: Colt M4A1 Metal AEG.

Materials: Metal & Nylon.

Weight: 6 pounds.

Barrel: 15 inches, metal.

Propulsion: AEG

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB (recommended .20 gram plus).

Ammunition Capacity: 300+ round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the King Arms Colt M4A1 is fairly short and light as it is essentially just an on off switch for the internal electronic components. You can shoot this gun very quickly in semi auto mode, and of course even quicker when full auto is selected.

Accuracy: Again, I tested this Airsoft rifle just like I do my other BB rifles and put 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I used a non-magnified red dot scope for this test rather than using the built in iron sights. Like my initial WE SCAR test, when I walked up to the paper I was shocked at this Airsoft rifle shooting .20 gram plastic BB's. I again got a 2 inch 10 round grouping! I am beginning to think that a well tuned Airsoft gun can make for a pretty good target plinker!

Build Quality: The King Arms Colt M4A1 Metal AEG Carbine is very well made with a full Metal upper and lower receiver, along with metal parts exactly where they would be on the real steel version of the Colt M4. The only plastic or nylon components are the stocks and the grips and perhaps some internal parts. There is a bit of wiggle in the rear stock and metal magazine but this may be a Colt M4 attribute, for the most part the fit and finish was excellent!

Realism: As with many Airsoft guns, there is great attention to realism and the King Arms Colt M4A1 is no exception. It is an AEG and not a gas blowback Airsoft gun so it does lack some realism in terms of the hard hitting bolt action but on the other hand you can fire what seems like an endless stream of BB's in full auto with this AEG Colt M4A1 Replica. I do like the fact that the charging handle and forward assist works similarly to a real M4 and also the Dust cover cleverly exposes the internal hop-up for easy adjustment. The Colt licensing and branding throughout this M4A1 look-a-like help to really make this Airsoft rifle look believably like a real Colt M4 carbine. 

Purchased From: The Replica Airguns Store.

Pros:

• Amazing attention to detail with lots of working parts.

• Full colt licensing and markings.

• All Metal upper and lower receiver, lots of metal parts throughout.

• Semi auto & full auto selectable.

• High capacity 300+ round magazine.

• Removable carry handle with Weaver/Picatinny rail underneath.

• Nice high 400+ FPS.

• Extremely accurate for plastic BB's.

• Fully adjustable sights with two position Peep sights.

• 6 position adjustable stock.

• Easy access to internal hop-up system.

Cons:

• Magazine and stock seems bit lose.

• Canada version does not come with battery or charger.

• Came with the orange flash hider, you may want to replace or paint it if legal in your area?

• May be too powerful for inside skirmishes without some detuning.

Comments:

I was not fully sure if I would warm up to an AEG style of Airsoft rifle as I really enjoy the realism of a gas blowback type of replica gun. But the overall realism of the King Arms Colt M4A1 metal AEG really won me over and the added working components like the charging handle and forward assist along with the fully adjustable sights and 6 position stock just made it for me with this Airsoft Carbine. There is something to be said about an AR15 styled gun, they just look the part and this very realistic and usable M4 Airsoft replica is not just great to hold and look at but also performs very well which would make it deadly on the field! Now if only I could find some time to use it on the field ;)

Buy this Airsoft rifle in Canada 

Buy this Airsoft rifle in the US

I already mentioned all three of these gun in my previous posts, two being Airsoft: the King Arms Colt M4A1 All Metal and my Western Arms Shorty .40. And one being a 4.5mm steel BB shooter, the Swiss Arms Sig Sauer GSR 1911. I wanted to make you a quick YouTube Preview video to show you around all three replica guns before I get around to actually doing my full reviews for each of them.

I will most likely start off with my King Arms Colt M4A1 All Metal Airsoft rifle, then review my Swiss Arms Sig Sauer GSR 1911 4.5mm BB pistol, then finish off with my deal Airsoft pistol, the Western Arms Shorty 40.

This preview video should give you a good idea about these guns, but make sure to stay tuned for my full review videos for each of them.

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Buy Swiss Arms GSR 1911 in Canada

I have been very eagerly waiting for my King Arms Colt M4A1 to show up and it finally did. I have wanted an M16 - M4 for some time and to be honest I didn't really care if it was a 4.5mm steel BB shooter or 6mm plastic Airsoft gun. I just wanted it to look the part and hopefully perform well too.

Well I was definitely very happy with the King Arm Colt M4A1 All Metal Airsoft rifle. It looks amazing, has good weight, metal in all the places you would find metal on the real steel version, working bolt assist, working charging handle and both semi and full auto fire modes. My King Arms Colt M4A1 even has a removable carry handle.

And as for performance, it shot right on the money in both fps and accuracy, I don't want to give away too much since I will be doing a full review very soon but you will not be disappointed with this one!

Buy this Airsoft rifle in Canada   -   Buy this Airsoft rifle in the US

Every once in a while you get kind of lucky and get a real steel on something. Here in Canada, getting your hands on an "all black" Airsoft pistol is kind of hard since they are literally impossible to import as they are considered replicas unless they shoot "over" a set fps which most Airsoft pistols have trouble obtaining. There are some all black guns floating around from before the import restriction and there are some that slip through the cracks.

Yesterday I went into my local Army Surplus store (they also sell Airsoft guns) and saw a rather interesting little black pistol in behind the glass, something I had never seen before. When I looked at it a bit close it was in fact an all black GBB Airsoft pistol version of the Smith & Wesson .40 caliber Shorty! The sales person quickly told me the $50 price tag was because it was non-functioning or as he called it a "Grave Yard Special" I though hey, makes for a nice replica even if it does not work and so I bought it on the spot.

As is pretty normal for me, I rarely take anyone at their word and like to check things out for myself. So I loaded the magazine up with propane, added 20 BB's to the magazine and headed to my deck to give it a try. 20 rounds later and with my slide locked back I came to the conclusion that there was nothing wrong with this Airsoft catch of the day!

If your wondering where to get one I am not really sure, I did see them online in some overseas sites for around $220 or so. So my $50 was well spent ;)

I am in the process of making a "preview video" of this gun and will do a follow up full review video down the road a bit.

 Buy Airsoft guns in Canada   -   Buy Airsoft Pistols in the US

One more stock related update for the day! We now have the King Arms Colt M4A1 Metal AEG Airsoft Rifle available in the Canadian Replica Airguns Store in and ready to ship. I will also be receiving this gun early next week for review so make sure to check back for that YouTube Replica Airguns Airsoft Video Review.

Buy this gun in Canada   -   Buy this gun in the US

The CBSA (Canada Customs) has posted some good news for a change about the Reclassification of Airsoft Guns that shoot over 366fps! (Customs Notice 12-005)

So what does this mean? In a nutshell, any Airsoft gun that shoots a .20 gram airsoft BB at over 366 fps is now considered an uncontrolled firearm just like a regular airgun. And so it can be made out of full metal and look exactly like a real gun even without the red tip. (before the threshold was .22 gram BB had to shoot over 407 fps)

This means we will now be able to bring a lot more "All Metal Replica" Airsoft guns into Canada that where previously not allowed because of our much higher feet per second restrictions.

Here is the official statement from the CBSA:

1. The purpose of this notice is to advise of changes affecting the classification of 6mm calibre airsoft guns.

2. Section 2 of the Criminal Code defines a firearm as “a barrelled weapon from which any shot, bullet or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barrelled weapon, as well as anything that can be adapted for use as a firearm”.

3. As outlined in Memorandum D19-13-2, Importing and Exporting Firearms, Weapons and Devices, it was previously established that an airsoft gun, firing a .22g 6mm plastic pellet, must have a muzzle velocity in excess of 124 m/s (407 fps), in order to be considered a firearm.

4. Based on the latest research, it is now established that the muzzle velocity at which a .20g 6mm plastic airsoft projectile is capable of causing serious bodily injury is 111.6 m/s (366 fps).

5. Airsoft guns, firing a .20g 6mm plastic pellet, with a muzzle velocity above 111.6 m/s (366 fps), will be classified as firearms. Please refer to D19-13-2 for the import requirements of low muzzle velocity firearms, including low muzzle velocity “uncontrolled” firearms.

6. If an airsoft gun, firing a .20g 6mm plastic pellet, shoots below 111.6 m/s (366 fps), and resembles with near precision an existing make and model of a firearm, other than an antique firearm, it will be classified as replica firearm. Replica firearms are prohibited devices and must meet import requirements as listed in D19-13-2.

7. Inquiries and comments about this notice should be directed to: Other Government Department Programs Unit Programs Branch Canada Border Services Agency E-mail: faw-aaf@cbsa-asfc.gc.ca

Update on 2012-03-03 07:19 by Michael Kaye

Here is the direct link to this Customs Notice 12-005 on the CBSA website!

OK we are one step closer to having stock on some Airsoft guns. I have 4 new full-auto rifles for you to choose from in our Canada and US Replica Airguns Stores. In the US Replica Airguns Store they are in stock and ready to sell but we have to wait just a bit for them here in the Canada Replica Airguns Store so I am giving the Canadian version a bit of a pre-sale price reduction to give you some incentive!

The Canadian versions are all high velocity and shoot in the 450 fps range to allow us to sell them to you here in Canada in the "non-clear" solid metal and polymer versions since they will be classified as "non-regulated firearms" just like a regular airgun.

And yes I will be reviewing these Airsoft rifles for you, hopefully all of them :)

King Arms Colt M4A1 Metal AEG Airsoft Rifle

FN Herstal F2000 Tactical AEG Airsoft Rifle

Kalashnikov AK74 SU AEG Airsoft Rifle

AK47 Kalashnikov Tactical 60th Anniversary AEG Airsoft Rifle
 

Buy these Airsoft guns in Canada   -   Buy these Airsoft guns in the US

If you have not already read my Table Top review for the WE SCAR-L, then make sure to check it out for specifications and an overall review of this very nice Blowback Airsoft rifle.

This Field Test review kind of baffled me, I was surprised with almost everything about it. Initially when I got my WE SCAR, I tested it out with one of my CO2 mags and got some pretty decent results not only in FPS performance but also in the accuracy department, I got around 400+fps and a nice 2 inch group from 30 feet out in a semi-rested position.

So when I headed out to record my Field Test, I was expecting some decent results! I'm not going to say this gun let me down but it did perform radically different for me on this day then the previous day and the only real difference is that I did a complete filed strip, clean and lube of the Airsoft rifle which in my opinion should of improved things but I guess not?

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

The most surprising realization I had was that with CO2 (as compared to the Propane), I did notice a heavier blowback and faster rate of fire in full auto but for some reason I had less velocity by almost 100fps when compared to using my Propane magazine? And my accuracy suffered also by an amazing amount. Some rounds had trouble even getting on the paper?

I will revisit this rifle in the summer, I think I will strip it down and wipe it down and perhaps redo this test entirely! I still love this Airsoft blowback rifle for so many reasons but on this day at least it came up a bit short for me.

My Vimeo Video Field Test Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada

Buy Airsoft rifles in the US

Make sure to also watch my Field Test Review for the WE SCAR-L!

Type: Airsoft.

Manufacturer:WE.

Model:AWSS SCAR-L Generation 3 Closed Bolt (Tan).

Materials: Metal & Polymer.

Weight: 6.9 pounds.

Barrel: 11.5 inches, metal.

Propulsion: Green-gas - propane - CO2

Action: Semi/full auto, single action.

Ammunition Type: 6mm Plastic BB.

Ammunition Capacity: 30 round magazine.

FPS: 450.

Trigger Pull: The trigger pull on the WE SCAR is very short and light. You can shoot this gun very quickly, that is after you recover from the very heavy blowback action you can really feel in your shoulder.

Accuracy: I thought I would test this Airsoft rifle just like I do my other BB guns, why put it in a class by it's self? So I put about 10 rounds into a target from 30 feet out using a semi rested position (sand bag in the front - standing in the rear). I was using a non magnified red dot so there was going to be some variance on the target from that range no doubt. When I walked up to the paper I was rather stunned as this Airsoft rifle shooting .25 gram plastic BB's got a 2 inch 10 round grouping! This makes for an awesome plinker - Airsoft or not!

Build Quality: The WE AWSS SCAR is very well made with a full CNC Aluminum Upper, all steel internals and very high quality polymer lower receiver and folding stock. As far as I could tell all the external mechanical parts are also metal including the trigger, selector switch magazine release, bolt catch release, charging handle. all accessory rails and sights and anything else I missed! The Magazine is also metal.

Realism: One thing about most Airsoft guns is the attention to realism and in this area they generally have the edge over their 4.5mm Steel BB shooting brothers. This WE SCAR copy is 100% true in design and even field strips exactly like the real NATO round firing version. It even has the true marking indicating "MK 16MOD O and CAL. 5.56 MM." on the upper receiver. Like the real SCAR, everything functions the same including the semi auto and full auto selector switch :)

Purchased From: Private sale.

Pros:

• Amazing attention to detail.

• All CNC aluminium upper.

• All metal internals and metal external mechanical parts.

• Semi auto & full auto selectable.

• Awesome blowback kick really hits you in the shoulder.

• Field strips just like the real steal.

• Nice high 400+ FPS even with .25 gram BB's

• Extremely accurate for plastic BB's.

• Full ambidextrous, even the charging handle can be switch side to side.

• Can use propane or CO2 with the appropriate magazine.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Not cheap to buy in Canada.

• Eats CO2 pretty quickly.

• Because of heavy blowback, you need to check wear and tear on the parts often.

• May be too powerful for skirmishes without some detuning.

Comments:

This is really my first Airsoft review and for the most part my first real serious Airsoft gun. I do have a Crosman M50 (UZI copy) that I bought a while back and I will review it also but it was one of those Canadian see through guns that look like kids toys :( Getting back to the WE AWSS SCAR-L... I just love the design of this type of rifle, I even bought the almost exact same gun in a .22 rimefire - the ISSC MK22 SCAR, check that review out if you have are looking for  a .22LR gun. Again getting back to the WE AWSS SCAR-L!! It's got so much going for it. Quality, realism, performance, made by a reputable Airsoft company and as far as GBB Airsoft guns go it is well priced!

For those that like to skirmish or use these in Airsoft war games, they may want to go with the AEG (Automatic Electric Gun) version because they require less reloading and have more sustained FPS. But for me since I don't really do any Airsoft war games, well at least not yet? I kind of like the realism of the blowback with its kick and more realistic magazine capacities. Since I go after the most realistic guns I can get, this Airsoft rifle really speaks to me and just because it shoots a plastic BB rather then a metal BB, I really can't say it makes to much difference for what I'm shooting at anyways. I point it at stuff and the stuff gets knocked down and generally with the same hole in it my 4.5mm BB's would have made. Look forward to more Airsoft reviews in the future...

My Vimeo Video Review for the WE AWSS SCAR-L - SCAR Type Rifle:

Buy Airsoft rifles in Canada   -   Buy Airsoft rifles in the US

I wanted to get this video out to you a bit sooner but I have been really sick the past three days and so I have not had a lot of time to put this YouTube Video together. It's a pretty simple compilation of some photos and videos I took during my time walking around the 2012 SHOT Show in Las Vegas, not all of it is to do with airguns but most of it is. I even took a few touristy shots since it wasn't all work ;)

This isn't an Airsoft review just yet but I will be reviewing the WE SCAR Gas Blowback 6mm Airsoft Rifle next week, I just purchased this one used from another fellow YouTuber "FuzzyDicePimp" who was gracious enough to sell me his.

You will have to bare with me a bit on this first review as I more experience with Airguns so I think my first Airsoft review may be a bit more of me comparing the WE AWSS SCAR-L to my airguns but then again I don't really have that many tactical rifle styled air guns to compare it to.

The WE SCAR I am reviewing is a generation 3 with the closed bolt system, it came with a gas magazine but I purchased a couple of CO2 mags as that is more what I am use to. So we will see if I can get a propane converter and I can do a comparison of the two magazines in my review.

My first impression of this gun is "WOW" FuzzyDicePimp sent it to me with some juice in the magazine so I shot a few rounds through it. I had some .12 gram 6mm Airsoft BB's lying around and I also had some 6mm steel ball bearings, both of these really seemed to shoot hard and the blowback on the WE SCAR is very solid.

Check back next week for more on this very nice Airsoft Rifle.

Buy Airsoft rifles in Canada   -   Buy Airsoft rifles in the US

First off, make sure to checkout my Table Top Review for the Umarex Beretta CX4 Storm for all the specifications and details on it.

In this Field Test Review of the Beretta CX4 Storm .177 caliber pellet shooting air rifle I shoot 5 rounds through the Chronograph to get a real world average FPS of this detuned Canadian version. As expected the Beretta CX4 Storm does not get anywhere close the 600 FPS the non-regulated version claims to get and even with fairly light 6.9 grain pellets I got an average of just under 400 FPS, perhaps a little too aggressive with the Canadian regulating of the CO2. I would have liked to have seen much better Feet Per Second performance from the pellet shooting Umarex CX4 Storm.

On the other hand this CX4 replica air rifle was incredibly reliable when it came to operation, I did not have even one misfire or failure to load a round even with the rather unusual 30 round belt-fed magazine, which one might think would be prone to problems. The Umarex Beretta CX4 Storm has a very snappy feel with its blowback operation that gives you a confident feeling when shooting and the 8 pound trigger seems to actually lighten up the faster you shot it :)

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

During my Accuracy Test using a magnified scope from 30 feet out in a semi-rested position, I got pretty decent results but nothing amazing, just over a one inch 12 round grouping. Again this airgun is made for fun and you can really empty the 30 round magazine fast and with good precision. I would not recommend it for any type of small pest control because it is a bit underpowered but for target practice and plinking it works very well.

As far as recommending this gun, I think it is very well made and it performs excellent, if you can get your hands on the higher FPS version then it would be a nice upgrade to the one I was testing. The price may be a tad high but it really is a very good quality air rifle overall.

My Vimeo Video Table Top Review of the Umarex Beretta CX4 Storm Pellet Rifle:

Buy Air Rifles in Canada   -   Buy this Air Rifle in the US

Type: .22 caliber rifle.

Manufacturer:ISSC.

Model:MK22.

Materials: Metal & Polymer.

Weight: 6.5 pounds.

Barrel: 16 inches, metal rifled.

Propulsion: Gun Powder.

Action: Semi auto, single action.

Ammunition Type: .22LR caliber rimfire.

Ammunition Capacity: 22 round magazine.

FPS: 1,138 - 1255.

Trigger Pull: The trigger pull on the ISSC MK22 is fairly short with a bit of noticeable break point in it but overall is pretty light. I get the feeling that this may be a striker based action because of the slight tension before the release.

Accuracy: I put about 300 rounds through the ISSC MK22 and took some time getting used to how it felt and also sighting in the sights on my 4 power scope. Once I felt comfortable I setup a new target and placed a full magazine (22 shots) all with in a 2 inch group from 20 yards out (60 feet). I was in a seated position using and elbow based rest. I was very happy with these results.

Build Quality: To me the ISSC MK22 SCAR clone feels like the real deal, it's not till you load it up and fire off a few rounds that you can even tell you are shooting the .22 caliber rimefire version. The MK22 has a lot of metal parts and the fit and finish is very good. You do have to use quality .22 caliber ammo in this guns for the best results because it can be a bit picky and also make sure to also take a bit of extra time when loading your magazines to ensure the ammo is set well to the back of the magazine. I'm not saying you can't use the cheap box ammo but you will have to be prepared to clear a few rounds from time to time.

Realism: It doesn't get any more real than this, the ISSC MK22 is basically an FN SCAR in a smaller cheaper .22LR caliber. But if you want to spend $3000 on the real thing and several hundred dollars per day at the range in ammo then get the full NATO round firing version. Unfortunately my pocket book does not allow for this and I don't think we can even get the larger caliber versions here in Canada. I also go to an indoor range that allows .22 caliber rifles to be used alongside the pistols which makes getting out and using the ISSC MK22 that much easier.

Purchased From: ???

Pros:

• One fifth the price of the NATO round firing version to purchase and operate.

• Mostly metal construction with good usage of polymer in the right places to keep it light.

• Lots of rails to mount just about any type of accessory you can think of.

• Nice high capacity 22 round magazine to keep the shoots going.

• Versatile flip up multi position sights for pistol or rifle based target acquiring.

• Fully adjustable stock with three length positions and check hight position, can also be folded in.

• Most bad ass looking .22 caliber rimefire rifle around.

• Made in Germany

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• Not the Cheapest .22LR on the market in this category but well worth the added price tag.

• Can be a bit picky about which bullet's you use in it and how you load the magazine.

• The rear stock cheek rest is a bit high when using the pistol sights or a low rise scope, you may need a riser under your scope.

Comments:

As you know, I don't do a lot of actual "real gun" reviews, the ones that use gun powder and shoot lead bullets. I do have a very soft spot for the .22 caliber rifles for a few reasons. Firstly, they are usually more inexpensive to buy and also to shoot as the ammo is only a fraction of the cost of the larger caliber ammo. .22 rimefire guns can also be shot in more areas and at most gun ranges so you are more likely to get better use out of it in the long run. The ISSC MK22 FN SCAR clone is definitely the most impressive .22 caliber tactical styled rifle you can get, at least in Canada and even though it is at the top of the price rang in it's category it is well worth it because it is really a very high quality gun at a reasonable price.

My Vimeo Video Review for the ISSC MK22 FN SCAR Type .22LR:

Type: BB Machine gun.

Manufacturer:Baikal.

Model:IZH MP-661K.

Materials: Metal & Polymer.

Weight: 3.5 pounds.

Barrel: 8 inches, metal-rifled.

Propulsion: CO2 or (Bulk air with adaptor).

Action: Electronic trigger with 1-3-6 round burst & 300-340-600 Rounds Per Minute.

Ammunition Type: 4.5mm steel BB's.

Ammunition Capacity: 30 rounds.

FPS: 360-500.

Trigger Pull: The trigger pull on the IZH Drozd is nice and light due to the fact that the trigger is not mechanical but is instead an electronic on-off switch that operates a solenoid. The solenoid pulsates in turn hitting the CO2 valve release. This is how the single fire and burst fire rates are achieved.

Accuracy: When I was sighting the Baikal Drozd in I got several 5 shot groups well within 1 inch 30 feet out from the target. But when I did my actual video accuracy test, the Drozd did not perform as well, getting more like a 2 inch group, still very reasonable for a gun that can shoot 600 rounds per minute out of the box and 1200 rounds per minute when modified. With metal streaming out the barrel like that you are pretty much going to hit what ever you point it at, the odds are in your favor!

Build Quality: This is a typical Russian made gun, all business and less importance put on looks but even so it is visually appealing, at least to me! Everything works exactly as it should and even though the main shell is plastic it is really a weapons grade polymer so there is no cause for concern here. There are a fair amount of metal components like the factory barrel, most of the magazine and many internal parts.

Realism: Again, the Baikal Drozd IZH MP-661K is not a replica, but it does look like a sub machine gun in many ways, I'm really just not sure exactly what it looks like but when you are shooting this gun you really don't think much about this point because you are too busy grinning!

Purchased From: The Replica Airguns Store.

Pros:

• Very well made BB machine gun.

• Excellent power.

• Good accuracy in all shooting modes.

• Uses the 12 gram CO2 - a bit cheaper! (Can also convert to bulk air)

• Stock version can shoot up to 600 rounds per minute.

• Multiple stock lengths.

• Rifled barrel.

• Adjustable rear sight for windage and elevation.

• Removable magazine hold BB's and CO2.

• Many mods for this gun.

• Great for pest control, especially the ones that don't stay still.

• Made in Russia.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

• 12 Gram CO2 - you need to change it often!

• Top Accessory rail is a bit short and low.

• Rear stock can get lose sometimes (just add some tape to tighten it up a bit).

Comments:

The Baikal IZH MP-661K is one of the most fun BB machine guns out there and well worth the extra cost to get such a quality product that not only is great out of the box but can also be modified in so many ways to improve it's performance and looks dramatically. Sure the Baikal IZH MP-661K now has a big brother, the Drozd Blackbird, but the Blackbird may be just a bit of overkill for some, I kind of like the Drozd Classics more compact size and if you can't nail what your shooting at with 30 rounds then your doing something very wrong! The Drozd is really the epitome of extreme BB gun weaponry!

My Vimeo Video Review for this Russian made BB Machine gun:

Buy BB Rifles in Canada

Buy BB Rifles in the US

My recently acquired (Thanks UmarexUSA) Umaerx EBOS CO2 BB Machine Gun was just screaming for some add-ons and to be honest the first thing that I noticed was the open sights really needed upgrading. Luckily the rear sight is removable allowing you to mount just about any type of Red Dot Scope or sighting system you want, just make sure it is high enough to see up and over the front BB hopper.

I decided to go with an EOTech Styled Red-Green Dot Tactical Scope and I have to tell you this guns looks awesome with it installed!

I finished off the look with an unobtrusive Tactical Rail Mount Flashlight. All in all I think I spent about as much if not more on accessories for this gun as it is worth to buy :)

Buy BB Rifles in Canada

Buy BB Rifles in the US

Type: CO2 BB Shotgun.
Manufacturer: UmarexUSA.
Model: Walther SG9000.
Materials: Plastic (polymer) and some metal construction.
Weight: 2.35 pounds.
Barrel: 11.5 inches, metal non-rifled.
Propulsion: CO2 x 1 (88 gram).
Action: Semi auto, double action only.
Ammunition Type: 4.5mm BB's
Ammunition Capacity: 40 shot internal spring fed magazine.
FPS: 480 (single shot) - 250 (three shot burst).
Trigger Pull: The trigger pull on the Umarex Walther SG 9000 is in the mid range and is a bit long but once you get used to it you can fire off shots very quickly with little resistance. There really aren't any sticky spots in the trigger pull to speak of.

Accuracy: I shot this CO2 BB Shotgun at a target from the hip 20 feet away using my NcSTAR laser sight I installed on it in a free standing position, and it performed excellent getting a 1.5 inch grouping fairly centered on target. I also performed my accuracy test from 30 feet out in a semi-rested position using my 6x32 NcSTAR Scope and again I got a 1.5 inch grouping proving that a BB gun can show decent accuracy even from further out when setup properly. With my Chrony Chronograph testing I scored much higher then the factory claimed feet per second of 480fps in single shot mode and 250fps in three shot burst mode. I ended up getting an average 8 shot fps in single shot mode of 504fps and 309fps in three shot burst mode!
Build Quality: This is an almost all external polymer air gun with some metal components on the inside giving the Walther SG9000 a bit of a light to medium overall weight but once you add the large 88 gram CO2 cartridge and some accessories this gun can quickly gain a pound or two. All four accessory rails are metal along with the trigger. The fit and finish is very good on the SG9000 and the plastic quality seems very durable.

Realism: The Umarex Walther SG9000 is licensed by Walther but other then a similarity in the pistol grip it doesn't closely look like any specific Walther product or any specific Tactical shotgun for that matter. It does have a very tactical look and with a few accessories added you will have yourself a very persuasive looking shotgun on your hands.
Supplied by UmarexUSA - Can be purchased from: The Replica Airguns Store.

Pros:

• Inexpensive versatile BB shotgun.
• Nothing else really like it out there.
• Multiple shooting modes - singe and three shot burst.
• Uses 88 Gram CO2 so less stopping to change CO2.
• Very good FPS readings - above factory claims.
• Very accurate for a BB gun from close up and further out.
• Lots of rail locations for all kinds of accessories and different customizable looks.
• High capacity 40 round internal magazine.
• Totally fun!

Cons:

• The plastic exterior may put off some people looking for a heavier more metal gun.
• 88 Gram CO2 can be a bit pricy, not as cost effective as 12 gram CO2.
• Trigger pull is kind of long.
• You will need to purchase some sort of a sighting system for it as all you have is a rail on top.

Comments:
The Umarex Walther SG9000 is a really fun and very inexpensive CO2 BB shotgun. With its multiple shooting modes you have the option of power and accuracy in single shot mode or to simply blow stuff away in three shot burst mode. The Walther SG9000 is also very customizable allowing you to really make this Tactical BB shotgun your own by decking it out with just about any combination of add ons and accessories you like! I found this gun the most fun to shoot in three shot burst mode using my laser sight and literally knocking down everything I pointed at!

Watch my YouTube Video Review of the Umarex Walther SG9000 CO2 BB Shotgun:

Buy this gun in Canada   -   Buy this gun in the US

Before I get into my full reviews of the Umarex Walther SG 9000 BB Shotgun and Umarex S&W M&P 45 Air Pistol, I thought I would do a quick Preview so you could get a quick look at both of these fine Umarex products.

A few highlights worth mentioning about each air gun:

• The Walther SG9000 shoots in both single shot and a 3 shot burst that fires all 3 rounds at exactly the same time, in the same manner that an actual shotgun would simultaneously fire all the buck shot.
• The Walther SG9000 is capable of 480 fps and uses an 88gram CO2 cartridge so you can refill the 40 rounds spring fed magazine a multitude of times before needing to replace your CO2.
• The Walther SG9000 does not come with any actual sights so you will need to add either a Red Dot Scope or Laser on to one of the many provided Picatinny rails located on the shotgun.

• The S&W M&P 45 can shoot in both double action and also single action by pulling the rear portion of the slide back to cock the internal hammer allowing for a very light single action trigger.
• The Smith & Wesson M&P 45 has a very nice solid weight to it, I was actually surprised at how hefty it was considering it has a mainly all plastic outer shell, my best guess would be close to 2 pounds. I think it's time to invest in a scale!
• The S&W M&P 45 also has a recessed barrel giving the muzzle the large caliber look of a real 45 auto adding to the realism of this replica gun.

Take a quick look at these two Umarex products in my YouTube video:

Buy similar guns in Canada   -   Buy this gun in the US

Buy this gun in Canada   -   Buy this gun in the US

Mil3 sent me some more updated photos of his customized Cybergun Tanfoglio Witness 1911 now with the Sight Rail add on.

Buy this gun in Canada   -   Buy this gun in the US