View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.

View fullsize

I had the chance to take the KWC 18 CO2 Blowback BB Pistol out for some shooting today to see how it performs. It’s a Glock-styled 4.5mm steel CO2 BB pistol with full blowback and selectable semi and full auto. It’s not an officially licensed Glock, but if you own (or have shot) Glocks, the controls and overall feel will be instantly familiar.

I’ve already done a close-up tabletop video for the KWC 18 covering specs and details, so if you want the up-close visuals and feature breakdown, make sure to check that out first.

For this session I concentrated solely on performance: a quick 5-shot chronograph run in semi-auto to record velocity, a 10-round semi-auto group at 30 feet, and then a full-auto mag dump to get a practical feel for controllability and “real world” accuracy—right out of the box (no tuning).

Velocity Testing (Chronograph)

For the chronograph testing, I ran five shots in semi-auto with a brand new CO2 in the magazine. The numbers came in at 293, 294, 282, 290, and 282 fps, for an average of about 288 fps. The spread was tight and the pistol felt extremely “snappy” while shooting, there’s a lot of pop in the blowback and you can feel it cycling hard.

One important note: this is a single-action-only style system, so you do need to rack the slide to cock it before it’ll fire (ask me how I know…).

View fullsize

Accuracy Testing (30 Feet)

For accuracy, I put a paper target out at 30 feet and fired 10 rounds in semi-auto. After a quick adjustment (the pistol was hitting very low at first), I aimed higher and got a roughly 3-inch grouping. The group was well centered left-to-right, but the pistol was still shooting noticeably low overall.

This is the kind of thing you’d simply keep in mind while shooting, and depending on the setup, you may be able to tweak elevation a little (but with steel BBs at short range, don’t expect miracles).

Full Auto (Mag Dump)

Then I loaded up and did a full-auto mag dump. As expected, it was basically spray-and-pray at 30 feet. The rate of fire is insane, and between that and the strong blowback, it was extremely difficult to keep rounds on target. I may have only landed a couple hits on paper.

Final Thoughts

All told, the KWC 18 is a really fun Glock-style blowback BB pistol if you want something that feels familiar in the hand and delivers a crisp trigger with serious recoil-like blowback. In semi-auto it’s manageable (even if it shoots low out of the box), but in full auto, at least at 30 feet, it’s more about the fun factor than practical accuracy.

• Buy the 18 CO2 Blowback Steel BB Pistol in Canada

• Buy 18 CO2 Blowback Steel BB Pistol in the US store

Today we’re looking at the A&K M1873R (the R version). There are a few different versions of this rifle in the lineup (some more compact, some more full-length), and the manual actually shows the variations so watch the video where I point that out.

This is a Table Top Review only, so we’re focusing on specs, details, and a walk-around. I was hoping to follow this up quickly with a Shooting / Field Test Video, but my sample has an issue: it’s leaking gas when I try to fill it (I tested with propane/green gas). I’ll need to sort that out first (repair or replacement), so the field test will have to wait until that’s resolved.

Here some links where you can buy the A&K M1873R in our Canada Replica Airguns and US Replica Airguns Stores

View fullsize

Specifications

• Manufactured By: A&K – Made in China

• Type: Gas-powered airsoft lever action rifle (non-blowback)

• Ammunition: 6mm plastic airsoft BBs

• Power Source: Green gas / propane (internal gas reservoir)

• Action: Lever action / manual cycle (one shot per lever cycle)

• Capacity: 25-round internal magazine (side loading gate)

• Velocity: Approx. 350–400 FPS with 0.20g BBs (temperature/BB weight dependent)

• Hop-Up: Adjustable hop-up system

• Build / Materials:

  • Real wood stock

  • Metal receiver and barrel assembly

  • M-LOK handguard (tactical “modern western” styling)

  • Top Picatinny rail (optics ready)

  • Brass butt plate

• Controls / Features:

  • Enlarged lever loop (glove-friendly)

  • Integrated lanyard ring / sling hoop

• Weight: 4.8 lbs (2.18 kg)

• Overall Length: 27.2 inches (69 cm)

• Barrel Length: 8 inches (20.3 cm)

In the Box

• A&K M1873R rifle

• Mock suppressor (cosmetic)

• Speed loader (you’ll want this for loading the internal magazine)

• Tools / Allen keys

• Small bag of airsoft BBs

• Simple 1-page manual

View fullsize

Manual Notes: Different Versions

The manual shows several versions of this lever action platform. Some are more compact and some are more traditional full-length lever rifles. There’s also a version that appears to run without the longer front barrel extension setup, which, honestly, is the version I’d personally lean toward since the included mock suppressor is mostly cosmetic.

Walk Around

This is a really sharp-looking rifle, it has that classic lever gun vibe thanks to the real wood stock and brass butt plate, but then it mixes in a modern tactical look with the M-LOK hand-guard and top Picatinny rail.

A few key points when handling it:

• No sights included: there are no iron sights on this rifle, so you’ll want to add your own optic (red dot, scope, or rail-mounted irons).

• M-LOK handguard + top rail: lots of freedom to build the look you want, keep it clean, or “tactical western” it up with accessories.

• Internal mag / side loading gate: loads like a real lever gun, through the side. The external profile stays clean (no big mag hanging out).

• Enlarged lever loop: easier to run with gloves or bigger hands, and it just looks right on this style of rifle.

• Sling / carry: it includes a metal lanyard ring / sling hoop, so carrying it is easy if you want it strapped while moving around.

View fullsize

Mock Suppressor and Gas Fill

The included “suppressor” is mainly for looks. It does have an orange front, and it doesn’t function as a suppressor (it’s not extending the inner barrel either).

Important practical detail: you’ll need to remove the mock suppressor to access the gas fill valve, which means you’ll want to keep the included tool (or something similar like a washer/coin that fits) with you.

Issue With My Sample: Leaking Gas

My review sample is leaking at the fill area. It looks like someone may have tried to seal it (there appears to be silicone or residue), and there are a few scratches that make me suspect this unit could have been a return. I tried tightening it, but it still leaks and it may be stripped.

This is not what you should expect out of a normal new unit, but I want to mention it because it’s the reason I’m holding off on the field test until it’s fixed.

View fullsize

Pros

• A lever action gas Airsoft rifle is just plain fun (and there aren’t tons of these around)

• Classic look with real wood + brass butt plate, but still has modern utility with M-LOK up front

• Feels solid in the hands (doesn’t feel cheap)

• Top Picatinny rail makes optics easy (and you’ll want optics since there are no sights)

• 25-round internal magazine keeps the outside profile clean

• Enlarged lever loop is great for gloves or cold-weather play

• Lanyard ring / sling hoop makes it easy to carry

• Speed loader makes loading fast once you get the hang of it

• You can run it more compact by skipping the mock suppressor (it’s optional)

Cons

• The internal 25-round magazine is awkward to load without the speed loader, don’t lose it

• Green gas performance is temperature sensitive, which can affect consistency in colder weather

• Not a fast follow-up shooter, you must work the lever for every shot (part of the charm, but it’s a limitation)

• You’ll need to add your own sights/optic (none included)

• The included mock suppressor must be removed to fill gas, which adds a little extra handling

View fullsize

Final Thoughts

The A&K M1873R is a really cool “modern western” mashup, classic lever action styling with real wood and brass, but with M-LOK and a top rail so you can build it out however you want. Lever guns force you to slow down and actually enjoy the shooting experience, and that’s a big part of why they’re so popular (even outside of Airsoft).

Once I get the leak issue sorted on my sample, I definitely want to do the field test, because this is exactly the kind of unique platform that deserves to be shot and evaluated properly. On the table, it looks great, feels solid, and offers a lot of customization potential, you just have to go in knowing it’s lever-action manual cycling, it uses green gas/propane (so temperature matters), and you’ll need to add your own optic since there are no sights included.

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US

This one’s really growing on me because it’s not your standard AR platform. We review a lot of AR-style rifles (and there’s nothing wrong with ARs, they’re popular for a reason), but this one has a very different vibe. It’s based on the SA80 British service rifle design and comes in a compact bullpup layout that gives you a long inner barrel without needing a long overall rifle.

Today’s Table Top Review is the G&G L85A2 (A2 version) ETU Airsoft AEG Rifle — and yes, a full Shooting / Field Test Video will be coming shortly. I definitely want to get this one out and properly test it.

This model is available in our Canada store. At the time of recording this review, it wasn’t available in the US store, but I’ll add an equivalent/similar US option (or a list of comparable AEG rifles) in the post links.

View fullsize

Specifications:

• Manufacturer / Distributor: G&G (Made in Taiwan)

• Replica Of: SA80 / L85A2 (British 5.56×45 NATO service rifle family)

• Platform: Airsoft AEG (Electric)

• Ammunition: 6mm plastic airsoft BBs

• Operation: AEG with simulated blowback (reciprocating bolt for a slight “tap” feel)

• Fire Modes: Semi / Full Auto (and programmable for 3-round burst via MOSFET programming)

• ETU System: Programmable MOSFET + Electronic Trigger Unit (ETU)

• Motor: High-torque motor (rated around 25,000 RPM)

• Gearbox / Internals: Full metal gearbox, heat-treated metal gear set

• Bushings: 8mm oilless bushings for smoother gear rotation

• Hop-Up: Adjustable hop-up (access via dust cover)

• Trigger: AEG electric trigger (single-action-only style in practical terms)

• Safety: Cross-bolt safety

• Sights: Metal, fully adjustable front & rear

  • Front: elevation

  • Rear: windage

  • Rear peep sight includes two aperture sizes

• Weight: 6.0 lbs (2.7 kg)

• Overall Length: 27.5 in (70 cm)

• Inner Barrel Length: 16 in (40.6 cm)

• Magazine: 450-round high-cap AR-style AEG magazine (AR/M4-style AEG mags should fit)

• Velocity: Approx. 370–400 FPS with 0.20g BBs (varies by setup/conditions)

• Top Rail: Yes (carry handle/rear sight assembly sits here; optics possible with a riser)

• Flash Hider: Metal AR-style, black (no orange tip on this one)

• Sling Mounts: Multiple mounting points; front appears reversible L/R, rear has mounts on both sides

View fullsize

Build Quality & Materials:

This rifle has a really solid, substantial feel and is nicely balanced. There’s a lot of metal here.

Notable metal parts include (from what you can see and feel):

• Upper & lower receiver areas

• Carry handle / rear sight assembly

• Front & rear sights

• Magazine (metal high-cap)

• Trigger guard (metal for sure)

• Barrel, flash hider

• Sling mounts, pins/screws, switches and assorted hardware

View fullsize

Polymer / rubber components include:

• Handguards

• Pistol grip

• Cheek rest area (polymer)

• Butt plate (rubber)

Overall: it looks great, feels great, and doesn’t feel “toy-ish” at all.

In the Box:

• G&G L85A2 ETU AEG rifle

• 1× metal high-cap magazine

• Cleaning rod

• Product brochure / extra paperwork

• Transport muzzle cover / cap

• Manual access via QR scan (links to G&G’s online manual)

View fullsize

Walk Around Notes:

A few highlights from handling it up close:

• Bullpup layout: compact overall, but the barrel/inner barrel length is still substantial.

• Sighting system: the carry handle doubles as the rear sight platform with flip apertures.

• Optics compatibility: you can mount an optic on the top rail, but you’ll likely want a riser so your eye line sits naturally.

• Dust cover + hop-up access: you can open the cover and access hop-up adjustments the normal AEG way.

• Charging handle note: my rifle did not come with the charging handle piece. I checked my unboxing footage and it wasn’t on there and it wasn’t in the box. It’s not essential for function, but at this price point it’s something you’ll want to confirm is included on yours.

View fullsize

Battery Compartment:

The battery area is under the handguard, and here’s the main downside:

• If you’re running a larger battery, you’ll likely need to remove hardware (including the sling mount and a bolt) to open the lower handguard section.

• With smaller nunchuck-style batteries, you may be able to fit them in with less disassembly, but bigger packs will probably require tools.

So yes: it works, but it’s not a quick tool-free battery swap design.

Quick Function Check:

I did a quick dry-fire demo using a 9.6V battery, and honestly it felt a bit underpowered/odd (some partial taps and inconsistent behavior). That could be the battery itself (mine was not great), but I would suggest this rifle will really come alive with a proper 11.1V LiPo and hope to use this setup in the field test video.

I’ve seen demos where the rate of fire is very high using an 11.1V setup, so that’s what I’ll be testing with for the shooting video.

View fullsize

Pros:

• Lots of metal in the construction with a super solid weight, feel, and balance

• Unique bullpup British-style rifle (not just another AR build)

• Simulated blowback adds a bit of feedback vs. standard AEGs

• Works with AR/M4-style AEG magazines (easy to find replacements/midcaps/highcaps)

• Good optics flexibility on the top rail (carry handle sight system included, or add your own)

• Programmable fire mode: Full Auto or 3-round burst

• No orange tip (and if you prefer one for visibility, you can always add your own)

Cons:

• Limited accessory mounting options (mostly just the top rail; not a modern “add rails everywhere” setup)

• Battery access can require tools and disassembly, especially for larger batteries

• Priced on the higher side (around $600+ CAD)

• My sample was missing the charging handle part, check yours when it arrives

View fullsize

Final Thoughts:

This is a really nice AEG. It feels premium in the hands, the two-tone green looks great, and it’s a cool change from the sea of AR platforms, while still keeping things practical with AR-style AEG mag compatibility.

The simulated blowback isn’t going to replace the feel of a true gas blowback rifle, but it’s a nice touch, and paired with the ETU/MOSFET system and upgraded internals, it helps justify why this model sits in a higher price bracket.

Next up: the field test / shooting video, ideally with a proper 11.1V battery so we can see what this rifle really does when it’s running at its best.

Availability:

• Canada Store

• United States Store

And remember we carry air guns, BB guns, airsoft guns, pellet guns, blank guns, and accessories in both our Canada and US stores.

Thanks for watching and reading! Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. More videos coming soon…

View fullsize

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

View fullsize

Specifications:

• Manufacturer: KJ Works

• Made In: Taiwan

• Power Source: 12g CO2

• Ammunition: 6mm Airsoft BBs

• Action: Semi-auto, full blowback

• Trigger: Single-action, skeletonized, adjustable (1911-style)

• Magazine: Full-size dropout metal magazine, 25-round capacity

• Weight: 1.96 lbs (890 g)

• Overall Length: 9.84 inches (250 mm)

• Inner Barrel Length: 4.25 inches (108 mm)

• Claimed Velocity: 366+ FPS

• Hop-Up: Adjustable

• Rail: Under-barrel Picatinny rail

• Sights: Fiber-optic front and rear

• Safety: Ambidextrous

• Magazine Release: Reversible

• Threaded Barrel: Inner and outer threading

• Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

View fullsize

In the Box:

• KP-19S CO2 Blowback Airsoft Pistol

• Full-size metal CO2 magazine

• Inner barrel extension

• Allen keys

• Small bag of Airsoft BBs

• Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

• Same frame, grip, slide profile, trigger guard

• Same skeletonized trigger and hammer

• Same magazine compatibility

View fullsize

Key Differences

• KP-19 (Non-S):

  • Flared magwell

  • Compensator

  • Removable rear plate for mounting a red dot

  • More competition-oriented configuration

• KP-19S:

  • No flared magwell (cleaner, more streamlined look)

  • Fixed rear sight

  • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

• Slide cutouts on the top and sides

• CNC-style gold/brass-colored fluted barrel visible through the slide

• Fiber-optic sights that are extremely easy to pick up

• Ambidextrous safety

• Reversible magazine release

• Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

View fullsize

Field Strip:

Field stripping follows a classic 1911 takedown:

1. Align the slide notch

2. Push out the takedown pin

3. Remove the slide assembly

Once opened, you gain easy access to:

• Inner barrel

• Recoil spring

• Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

View fullsize

Pros:

• High metal content with excellent weight and balance

• Strong, realistic full blowback action

• Excellent fit and finish typical of KJ Works pistols

• High-capacity 25-round metal magazine

• CO2 or gas compatibility (with appropriate magazines)

• Dual threaded barrel for accessories and extensions

• Bright fiber-optic sights (easy to acquire on any background)

• Short, light, adjustable 1911-style trigger

• Ambidextrous safety and reversible mag release

• Easy field stripping and hop-up access

Cons:

• Grip is wide and may not suit shooters with smaller hands

• Higher price point compared to similar KWC 1911 models

• Rear sight is not adjustable and does not accept a red-dot plate

  • Optics would need to be rail-mounted from underneath

View fullsize

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

View fullsize

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

View fullsize

In this Table Top Review, we’re taking a detailed look at the KWC 18 CO2 Blowback Steel BB Pistol. This model is part of KWC’s long-running lineup of Glock-style pistols—some licensed through Umarex and others, like this one, produced without official Glock markings but clearly inspired by the platform.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow shortly.

I've reviewed many Glock-style CO2 blowback pistols over the years—Gen 3, Gen 4, Gen 5, Airsoft, Steel BB, full blowback, semi-blowback—you name it. KWC manufactures a large percentage of these frames and blowback systems, often for Umarex’s officially licensed Glock models. So while this KWC 18 isn’t a licensed Glock, it’s built by the same people behind many of the Umarex-branded models.

Let’s get into the details, compare it briefly to a couple of Umarex Glock versions, and then talk pros and cons.

View fullsize

Specifications

• Manufactured By: KWC – Made in Taiwan

• Power Source: 12g CO2

• Ammunition: 4.5mm Steel BBs

• Action: Full Blowback (Semi & Full Auto Selectable)

• Magazine: Full-size dropout metal magazine, 18 rounds (Model AAKC MM19)

• Trigger: Single-action-only style, short and light (Glock-like)

• Length: 203mm (8 inches)

• Barrel: 102mm (4 inches), smoothbore

• Weight: 1.7 lbs (771 g)

• Velocity: Up to 314 FPS under optimal conditions

• Sights: Front white dot; rear white half-rectangle

• Safety Systems:

  • Trigger safety (Glock-style)

  • Secondary safety located in the “serial number” plate under the barrel

• Hop-Up: Adjustable hop-up (rare for steel BB pistols)

• Rail: Under-barrel Picatinny rail for lights/lasers

• Field Strippable: Yes – Glock-style takedown system

View fullsize

In the Box

• KWC 18 CO2 Blowback Pistol

• 18-round full-size dropout metal magazine

• Allen key for CO2 tightening

• Small sample pack of steel BBs

• Instruction manual (loading, CO2 installation, hop-up access, takedown, jam clearing)

• Product guide / brochure

The packaging is similar to many Umarex Glock boxes—clean printed box with an internal molded insert.

View fullsize

Comparison to Umarex Glock Models

To give this pistol some context, here’s how it stacks up against a couple of current Umarex licensed Glock variants:

Umarex Glock 17 Gen 5 (Semi-Blowback)

• Has the MOS-style removable optic plate

• Features a semi-blowback system with shorter slide travel

• More efficient gas usage, higher FPS

• Double-action-style trigger (not Glock-accurate)

Umarex Glock 17 Gen 4 (Full Blowback)

• Full blowback with full travel slide

• Uses the same style of full-size dropout metal magazine

• Much closer in function to the KWC 18

• Fully licensed Glock markings

KWC 18

• Same full-blowback feel as the Gen 4

• No Glock markings (unlicensed)

• Adds full auto mode, which the Glock 17 models do not have

• Very similar weight, ergonomics, and trigger feel

• Slightly different slide shape, trigger guard, and frame cuts to avoid trademark conflict

If you’ve handled Umarex Glock models, this KWC 18 will feel instantly familiar.

View fullsize

Walk Around

The KWC 18 is extremely Glock-like in shape and ergonomics, with only small cosmetic changes:

• Slightly longer and differently shaped slide cuts

• Altered trigger guard shape

• Modified rail and frame geometry

• No Glock-branded markings anywhere

Controls are where you expect them to be:

• Slide catch/release on the left

• Trigger safety

• Takedown levers in the Glock position

• Selector switch for Semi / Full Auto just above the trigger area on the left side

• Under-barrel safety disguised as a serial number plate

Sights are classic Glock style:

• White dot front

• White “goalpost” style rear

The full-size dropout metal magazine fits tightly and locks back after the last shot. The slide feel is excellent—strong spring tension, clean metal-on-metal sound, no cheap clanking.

Field Strip

Field stripping is Glock-simple:

1. Lock slide slightly back

2. Pull both takedown tabs down

3. Slide comes forward and off

(Note: KWC pistols are often tight from factory, so the first removal may require a solid tap.)

Inside you’ll find:

• Full metal slide

• Return spring/guide

• Removable inner barrel

• Accessible hop-up wheel

• Fire control components including the semi/full auto mechanism

Reassembly is straightforward once parts are aligned correctly.

View fullsize

Pros

• Excellent weight and feel – solid, realistic, and well-balanced

• Full blowback provides snappy recoil and realistic slide movement

• Single-action Glock-like trigger is short, light, and crisp

• Full-size metal magazine for realistic reloads

• Semi & Full Auto modes (rare for BB pistols)

• Adjustable hop-up — unusual but useful for slight elevation tuning

• Field strippable, great for maintenance and realism

• Picatinny rail for lights/lasers

• Good trainer option for Glock owners thanks to similar ergonomics

• Minimal branding gives it a clean tactical look

Cons

• Full blowback reduces FPS and CO2 efficiency

• Full auto burns CO2 extremely fast

  • Expect maybe one strong magazine and a partial second depending on temperature

• CO2 cooling effects occur quickly during rapid fire

• Tight factory tolerances make the first field strip a bit stiff

• No official Glock markings (a con only if you want licensed branding)

View fullsize

Final Thoughts

The KWC 18 CO2 Blowback Steel BB Pistol is a very solid performer for anyone who wants a Glock-style CO2 pistol with full blowback realism—and especially for those who want the fun of full auto.

The build quality is strong, trigger feel is excellent, the slide operation is smooth, and the ergonomics match real Glock pistols closely enough to make this a legitimate training or plinking option.

If you already own Umarex Glocks, this model will fit naturally into your collection and may even share some compatible magazines (listed as AAKC MM19).

A full Shooting / Field Test Review is coming soon—these KWC/Umarex Glock-pattern pistols are always a blast to shoot.

Buy the KWC 18 BB Pistol

You can purchase this item from our Replica Airguns online stores:

• Canada

• United States

We carry a large selection of Umarex Glocks, KWC Glock-style pistols, airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading!
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.
More videos coming soon!

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine

Type: Airsoft Rifle
Manufacturer: KJWorks
Model: M700 Take Down
Materials: Metal with textured synthetic stock
Weight: 7.5 pounds (3415 grams)
Barrel: Smooth bore barrel
Propulsion: Gas operated (Green Gas or Propane)
Action: Bolt
Ammunition Type: 6mm plastic Airsoft BB’s
Ammunition Capacity: 10–11 round metal magazine
FPS: Up to 450 FPS

View fullsize

Trigger Pull: The trigger on the KJWorks M700 Take Down Gas Airsoft Sniper Rifle performs as expected for a bolt-action style hunting or sniper rifle. Most of the work is done when operating the bolt, leaving your trigger finger with a light, short, and crisp pull to release the firing pin. This shlep a lot keeping everything steady since you can relax your grip adn really focus on your shot placement.

View fullsize

Accuracy: Be sure to watch my full Field Test Shooting Video for the KJWorks M700 Take Down Gas Airsoft Sniper Rifle to see its performance in detail. I only tested it indoors at my Sea Can range due to cold weather conditions, which aren’t ideal for gas guns. Shooting distance was limited to about 30 feet, but I plan to revisit this rifle outdoors in better weather for longer-range results. At 30 feet, the M700 produced a tight 1-inch grouping and averaged around 400 FPS using .25-gram Airsoft BB’s.
Note: I did encounter some magazine loading issues when fully loaded, BBs from the right side of the double-stack magazine occasionally jammed and didn’t feed properly into the breach.

View fullsize

Build Quality: The KJWorks M700 Take Down Gas Airsoft Sniper Rifle feels solid and well-made throughout. The fit and finish are good, and all the mechanical components functioned properly aside from the occasional BB feed issue. I like the textured synthetic stock and soft rubber butt pad. This rifle features a lot of metal construction, including the bolt, inner and outer barrel, magazine, sling and bipod mounts, trigger and guard, Picatinny rail, and safety. It feels robust and well-balanced overall.

View fullsize

Realism: The KJWorks M700 is modeled after the Remington 700 platform, giving it a very authentic hunting rifle look. The Airsoft version mimics the real firearm closely in both form and function. Since it’s powered by Green Gas rather than a spring, the bolt action is smooth, light, and realistic to operate. All the parts that would normally be metal or steel on the actual Remington M700 are also made out of Metal with the Airsoft version. The stock is also Fiber reinforced like the real stele version.

View fullsize

Pros:

• Gas-operated bolt is far easier to cycle than a traditional spring-powered bolt rifle.

• Heavy use of metal parts throughout.

• Excellent balance and solid overall feel.

• Take-down design makes it easy to transport and store.

• Fiber-reinforced stock adds durability.

• Metal sling and bipod mounts for customization.

• Full-size drop-out metal magazine holds both gas and BBs.

• Easy-to-adjust hop-up screw.

• Ideal FPS for long-range shots without being overpowered.

• Consistent accuracy, good 30-foot performance should translate well to longer distances.

View fullsize

Cons:

• No sights or optics included, you’ll need to add your own.

• Occasional magazine feeding issues, especially when fully loaded.

• Slightly higher price compared to most spring-powered bolt-action Airsoft rifles.

View fullsize

Comments:
I’ve tested a few spring bolt-action Airsoft rifles before, and while those are simple (just load BBs and shoot), the gas-powered M700 offers a much smoother and faster bolt operation, perfect for quick follow-up shots. When seconds matter and targets are closing in, that speed can make a real difference.

The KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a great ready-to-shoot platform out of the box and can be easily upgraded with a sling, bipod, and of course, a scope, since it comes without sights.

My review unit had a minor magazine issue, but I believe this was specific to the sample I received and not a widespread problem. Overall, it’s a very capable and well-built Airsoft sniper rifle that delivers solid power, realism, and usability.

• Buy the G&G RK Beta AK AEG Airsoft Rifle in Canada

• Buy the AK AEG Airsoft Rifles in the US

View fullsize

I tested another Steambow model in this Field Test Shooting Video, the Steambow AR Series M10 Tactical Crossbow. Like my other Crossbow Field Test videos, I recorded the Chronograph velocity while I was shooting the target so there was no need for separate segments, everything was done in one go with four cameras rolling. I didn’t put a dedicated camera on the Chronograph because I wanted a camera on the target; my camera glasses generally pick up the chrono readings anyway. I only have so many cameras, but everything recorded as planned. If you want the full specs and a closer look at the M10, watch my dedicated Table Top video.

Steambow quotes about 190–200 fps for the AR Series M10. My six chrono readings were 189, 191, 189, 189, 190 and 191, which worked out to a 190 fps average. Using the included 142-grain, 6.5-inch aluminum bolts produced roughly 11.4 foot-pounds of energy, so both velocity and FPE were basically on target with Steambow’s numbers. That’s adequate for small pests, but humane shots always come down to accuracy, you’ll want head or shoulder placement, and I’m not ready to declare any compact crossbow a guaranteed solution for that. Test accuracy for yourself.

View fullsize

For accuracy I shot six rounds at a paper target 30 feet downrange from my usual seated in the back, hands rested up front shooting position. The first shot from the Steambow AR Series M10 Tactical Crossbow was a few inches low, so I adjusted my point of aim up and ended up with an impressive 1-inch, 4-shot group just left of center. One bolt missed the target entirely, could have been me or a bad bolt (I’ll blame the bolt on that one). Still, for a compact crossbow this was an excellent result, comparable to some pellet rifles.

Overall the Steambow AR Series M10 Tactical Crossbow performed really well. I like the cocking and bolt-feeding system, cocking is simple: shoulder the stock, press the release, then pull the front down using the foregrip for leverage. Even with the higher power of this model you don’t need a lot of strength, and with practice follow-up shots can be quick. I’d add a red dot to the rail to help dial in accuracy and buy a few extra bolts for target practice and hunting. The M10 is one of Steambow’s pricier offerings, but it also has the highest ammo capacity and the most customization options. If you want the ultimate compact crossbow setup, the ability to preload multiple bolts and have extra 10-shot magazines on hand makes the M10 the one to consider.

• Buy the Steambow M10 Tactical Recurve Crossbow in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

I’ve tested a few compact crossbows before, but nothing with a multi-bolt loading system like the Steambow setup I’m testing in this video. As with my other Crossbow Field Test videos, I recorded Chronograph velocity at the same time I was shooting the target so I didn’t need two separate segments, I did it all in one pass with lots of cameras rolling. I didn’t dedicate a camera to the Chronograph for this test because I wanted a camera focused on the target; my camera glasses usually capture the Chronograph readings for me. I only have so many cameras, but everything was captured fine. If you want to learn more about the specifications and details of the Steambow AR-6 Stinger II, then watch my dedicated Table Top Video located here.

Steambow lists 180 fps as the claimed velocity for the Steambow AR-6 Stinger II Tactical. I consistently measured right around 160 fps, pretty close to the claim. Using the included 142-grain, 6.5-inch aluminum bolts my chrono readings ranged from 159 to 164 fps, averaging 163 fps, which is very consistent. That produced about 8.4 foot-pounds of energy, so both velocity and FPE were a little under Steambow’s stated numbers. That’s enough for small pests, but humane shots depend on accuracy, you’ll want head or shoulder placement, and I’m not fully convinced this bow is always up to that task. You’ll need to judge its accuracy for your own use.

View fullsize

On elevation (up and down) the Steambow AR-6 Stinger II was fairly accurate. Where it struggled more was windage: I had to aim noticeably to the right to move bolts toward the bullseye. The sight is very basic (a single fiber-optic post just behind of the Picatinny rail), which likely contributed to the windage issue. Despite that, I managed a roughly 4-inch group at 30 feet, with one bolt behaving like a flyer.

Overall the Steambow AR-6 Stinger II performed well. I really like the cocking and bolt-feeding system — cocking is easy by shouldering the stock, pressing the release, then pulling the front of the bow down using the foregrip for leverage. You don’t need to be super strong to do it, and with practice you could get very quick at follow-up shots. I’d definitely add a red dot to the rail to help dial in accuracy, and I’d buy a few extra bolts for target and hunting. The AR-6 Stinger II is pricier than some basic models, but the ability to preload multiple bolts in the built-in clip and unleash six shots in seconds makes the extra cost worth it to me.

• Buy the Steambow AR-6 Stinger II Tactical in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

I first reviewed the KJWorks M700P (the “P” for Power) back in 2018, so I was curious to see how the standard take-down version would perform. Ideally you’d mount a 3x (or higher) optic and test it at outdoor sniper ranges more typical for Airsoft sniper play, but the weather was rubbish for this session. Like last time with the M700P, I ended up doing the review inside my sea-can airgun range, which is fine for chronograph work but limits targets to about 30 feet.

For the indoor velocity test of the KJWorks M700 Take Down Gas Airsoft Sniper Rifle, I shot .25-gram plastic BBs through my Chrony. Over a five-shot string I averaged 403 fps, slowest was 400 fps and the fastest 406 fps, so reasonably consistent for a gas rifle. The gas mag was fully topped up with propane and the ambient temp was about 17°C (63°F). Lighter .20-gram BBs would of course register higher speeds, though in sniper builds you’ll often end up using heavier BBs than .20 g for better downrange performance.

View fullsize

Using the same .25-gram BBs for a close-range accuracy test at roughly 30 feet, the M700 Take-Down put most shots into about a 1-inch group with one odd flyer out to the right, could have been a bad BB or user error. I ran the test with a simple red dot since the rifle ships with no sights and I only needed something quick on the Picatinny rail for close work. I also had trouble getting all ten rounds from the 10-round mag onto the target because of some misfeeds / misreads; I don’t recall the M700P exhibiting this behavior, so it may be a quirk specific to my test unit.

Overall the KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a nicely executed sniper-style Airsoft rifle — very easy to dismantle and carry in a pack, reasonably gas-efficient, quiet, and powerful enough for the role. The feeding hiccup seemed to crop up when the follower was near the top of the stack (spring tension at its peak) and mainly affected BBs on the right side of the double-stack magazine — which makes me suspect a defect in my sample rather than a design choice. It doesn’t come with sights, so you’ll need to pick up a scope or optic, and personally I prefer the take-down model for its extra versatility.

• Buy the KJWorks M700 Take Down Gas Airsoft Sniper Rifle in Canada

• Buy Airsoft Sniper Rifles in the US

View fullsize

In this Field Test Shooting video for the Umarex Marlin Old West CO2 BB Revolver I check real-world performance: first I measure fps using a fresh standard 12-gram CO2 cartridge and 4.5 mm steel BBs through my chronograph. After that I hang a paper target at 30 feet and fire 10 rounds using the Single-Action-Only trigger to see what kind of grouping the revolver delivers straight out of the box. If you haven’t already seen my Tabletop Video Review for the John Wayne Marshal CO2 BB Revolver, watch that for full specs and close-up footage.

For the velocity test I put five shots through the chronograph. The slowest registered 345 fps and the fastest hit 416 fps, with an average of 403 fps, right in line with Umarex’s claimed 400 fps. Perfect for popping cans and casual plinking out to roughly 30–40 feet. The test was done inside a sea can at about 18°C (≈64°F), which gives a middle-of-the-road CO2 performance; warmer weather will typically push velocities higher.

View fullsize

Next I set the paper target on my pellet trap at 30 feet. Using my usual semi-rested position (hands braced on a front sandbag and seated on a stool), I fired 10 rounds with the Marlin Old West. The group measured roughly 4 inches, a bit left and just slightly high from the bullseye — not far off and similar to the grouping I got with the John Wayne Marshal CO2 BB Revolver, although the Marlin’s velocity numbers were notably higher.

The Umarex Marlin Old West CO2 BB Revolver is an inexpensive, mostly-plastic Single Action Army style revolver. There’s a fair amount of polymer in the construction, but it still feels solid despite being on the lighter side. That lighter weight can make the gun feel a bit twitchy in the hand compared with heavier replicas, which can affect accuracy. At the time of this video the Canadian price was about $99, which makes it good value — especially since it loads 18 rounds quickly compared with traditional shell-loading revolvers, meaning more trigger time with less fuss. There are a number of similar replica revolvers available from our Replica Airguns stores in Canada and the US, so check our stock if you’re shopping around.

• Buy the John Wayne Marshal CO2 BB Revolver in Canada

• Buy the John Wayne Marshal CO2 BB Revolver in the US

View fullsize

Type: BB Pistol.
Manufacturer: Distributed by Umarex
Model: Marlin Old West Revolver
Materials: Mostly plastic, some internal metal parts.
Weight: 1.2 pound (544 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.5 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 400.

View fullsize

Trigger Pull: The trigger on the Umarex Marlin Old West CO2 BB Revolver is single-action-only, so you must cock the hammer before each shot. That removes most of the trigger travel and effort, giving the Marshal a short, light, and easy-to-manage pull. It’s ideal for deliberate, accurate shooting, but less suited to action-style rapid fire unless you’ve got a very fast thumb.

View fullsize

Accuracy: I haven’t tested the Marlin Old West model specifically, but it should perform very similarly to the John Wayne Marshal CO2 BB revolver, they’re nearly identical aside from licensing, safety, and magazine placement. In my field test of the John Wayne Marshal it averaged closer to 360 fps rather than the claimed 420 fps and produced roughly a 4-inch, 10-shot group at 30 feet. You can watch that video here; I’ll hope to be posting a dedicated field test for the Umarex Marlin Old West soon.

View fullsize

Build Quality: There’s not a lot to get excited about in terms of materials, the Umarex Marlin Old West CO2 BB Revolver is mostly plastic with some internal metal parts like the barrel, trigger, hammer, and CO2 components. It follows the common two-half, screwed-together budget construction, which looks cleaner on the side where the screws are hidden. At just over a pound it’s fairly light. With relatively few moving parts, it should be reasonably reliable; the mechanical components do what they need to do and feel suitably solid for the price.

View fullsize

Realism: At first glance the John Wayne Marshal CO2 BB revolver resembles a Colt Single Action Army Revolver in shape and size, but it’s much lighter, about half the weight. The lack of real bullet openings in the cylinder (when viewed from the front) reduces realism. I’m used to the newer generation of revolvers with working cylinders and loadable, removable shells; those are pricier and hold fewer rounds, but they offer a much more authentic experience.

View fullsize

Pros:

• A decent looking replica of a Colt Single Action Army Revolver.

• Single action only trigger is short and light and well suited to careful shot placement shooting.

• 400 claimed fps is about perfect for plinking at ranges up 30-40 feet.

• 18 round magazine has a nice high capacity and easy to load when empty.

• Should get lots of shots per CO2.

• Safety is well hidden underneath just in front of the trigger guard.

• I like the look with the all black receiver and simulated wood grips.

• CO2 Allen key is built into grip so always have it on hand and will not lose it.

• Marlin licensed and seems to be $50 less than the almost exact same John Wayne version.

Cons:

• Mostly plastic builds makes it a bit light in the hand.

• No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

• Not a big fan of the clamshell plastic packaging.

View fullsize

Comments:
The Umarex Marlin Old West CO2 BB Revolver is a solid choice if you want an old-west single-action cowboy BB shooter for less than the nearly identical John Wayne Marshal (it’s about $50 cheaper). If you want more authenticity, consider one of the shell-loading Single Action Army style revolvers, they cost more, shoot a bit slower, and carry fewer rounds, but they deliver a much higher level of realism.

• Buy the Umarex Marlin Old West CO2 BB Revolver In Canada

• Buy the Umarex Marlin Old West CO2 BB Revolver in the US

View fullsize

I had the chance to take the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol out for some testing today in the Replica Airguns Indoor Shooting Range to see how it performs. I’ve already done my close-up tabletop breakdown (specs, build, pros/cons), so if you want the close-up visuals adn details, go check that video out. For this session I concentrated solely on performance, a quick 5-shot chronograph run to record velocity and a 10-round semi auto group at 30 feet followed by the rest of the mag in full auto to get a practical feel for out-of-the-box accuracy.

For the chronograph test I used a fresh 12-gram CO2 capsule with stand.25 gram Airsoft BBs, and the temperature was about 20°C. Five shots with .25 gram Airsoft BBs registered 301, 301, 291, 285, and 281 fps, averaging out to 292 fps. That’s within the expected range for a full-blowback CO2 pistol running heavier .25 gram Airsoft BBs, you’d see higher velocities with lighter .20 gram rounds, and it’s plenty adequate for Airsoft games and target work plinking.

View fullsize

On the accuracy side I fired from 30 feet using a semi-rested shooting position (hands braced on a sandbag while seated). In semi-auto the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol shot just slightly low and a touch left, producing roughly a 2-inch group with most rounds clustered reasonably well. Switch to full-auto, however, and it becomes almost impossible to keep on target, the pistol tended to climb high and stray to the right, putting most shots completely off the target. That full-auto behavior makes it poor for controlled rapid-fire engagement, but in semi-auto it’s much more manageable.

All told, the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol is a strong option if you like the Glock style or already own (or plan to own) a real-steel Glock. physically and mechanically it shares a very similar feel. KJWorks has a reputation for high-quality, well-made products, and this pistol is another solid example. If you don’t need official Glock licensing but want a Glock-based Airsoft pistol, the KP-18 is a great choice, especially for shooters who value realism and good build quality in a reasonably priced package.

• Buy the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US

View fullsize

Type: Blowback CO2 Airsoft Pistol.
Manufacturer: Distributed by KJ Works.
Model: KP-18 TBC.
Materials: Metal & Polymer.
Weight: 1.7 pounds (770 grams).
Total Length: 7.9 inches (20cm)
Barrel: 4 inches (10.6cm) metal non-rifled.
Propulsion: CO2 x 1 (Gas mags available).
Action: Semi & full auto blowback, SAO trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 22 round drop out full size metal magazine.
FPS: Claimed 410 (with barrel extension).

View fullsize

Trigger Pull: The trigger on the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol behaves like a true Single Action Only unit, pleasantly light with a fairly short travel. There’s a bit of initial take-up, but you can clearly sense the crisp break near the rear where the release occurs, extremely light, consistent, and free of any noticeable slack. Remember you’ll need to rack the slide to chamber the first BB; after that the blowback mechanism handles all subsequent cycling.

View fullsize

Accuracy: I haven’t yet fired the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol or produced a Field Test Performance video for it. However, I’ve already completed a full field and shooting test for the very similar KJWorks KP-13, so I’d expect comparable on-target performance between the two. I’ll post a full field test and shooting video for the KP-18 TBC down the road, stay tuned.

View fullsize

Build Quality: KJWorks pistols are generally well made, and I expect the KP-18 TBC to follow that pattern. Based on my hands-on time with the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol and my first impressions of the KP-18, fit and finish look excellent. As with other models, you’ll find metal and polymer components positioned where they would be on a real modern semi-auto pistol, which contributes to the solid, authentic feel.

View fullsize

Realism: The KJWorks KP-18 TBC is a close visual replica of the real-steel Glock G18-style pistol, albeit without official licensing. Umarex holds the Glock license for many BB and Airsoft models, and the fact that a green-gas magazine from the Umarex Glock 17 full-blowback fits the KP-18 suggests KJWorks may be manufacturing some Glock-pattern airguns for Umarex. Glock has historically objected to unlicensed replicas in North America, so how this will play out remains unclear. For now, both licensed and unlicensed options exist for buyers.

View fullsize

Pros:

• Metal and Polymer with decent weight and good feel to it.

• Heavy Full blowback operation.

• Excellent fit and finish as always with KJWorks pistols.

• High capacity full size drop out magazine that holds the CO2 and 22 rounds.

• Well hidden safety incorporated into the serial number under the barrel.

• Working trigger safety.

• White dot front sight and white outlined rear sight for easy target acquisition.

• All working components like a real steel Glock styled pistol.

• Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.

• Comes with barrel extension for higher velocity shooting (Possibly for easier import into Canada).

• Would make a good training weapon if you are a real steel Glock owner.

• Has a semi and full auto selector toggle located on the left rear of the slide.

• Can use CO2 or gas magazines.

• Field strip-able.

• No orange tip.

View fullsize

Cons:

• Sights are not adjustable.

• Full auto will use CO2 like crazy but may be worth it.

• Not a licensed version.

View fullsize

Comments:

If you’re a Glock enthusiast seeking a realistic training piece, you can shoot more affordably and in more places, there are more choices than ever. If official licensing matters, Umarex is the go-to option, although I haven’t seen a full-auto Glock from them yet. For those who prioritize a full-auto-style experience, the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol is as close to a real-steel Glock full-auto feel as you’re likely to find. I also appreciate the magazine interchangeability with some Umarex Glock mags if you already own a Glock 17 Airsoft pistol for instance. Whatever route you choose, it’s great to see more Glock-pattern airguns coming to market.

• Buy the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US

In this Umboxing Preview Video I take a quick look at tow Airsoft Guns from KJWorks, one is a Gas Blowback Airsoft Rifle and one is a CO2 Full Blowback Airsoft Pistol. I don’t get into too many of the details or specifications as this is really the first time I have seen either of these Airsoft Guns in person, a full table top and field test video review will be coming up for both of these Airguns down the road but I did want to get them out there so everyone know these are either in the Replica Airguns Online Store or will be showing up soon.

The first item I grabbed out of the box was the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol which looks a lot like a Glock but with a full auto selector switch on the left side of the slide and it also is the TBC model so it comes with a barrel extension that attaches to the inner barrel and the option to add a mock suppressor to the outside barrel threads. This version comes with a CO2 magazine but I am sure there are option to use it with a Gas magazine also.

Next out of the box was the KJWorks M700 Take Down Gas Airsoft Sniper Rifle which is a break down bolt action gas operated Sniper based Rifle as the name suggests. It is super easy to assemble and has a nice smooth bolt with the only sighting option being the addition of a scope added to the included picatinny rail. The base of this rifle is very heavy so it is is not a light weight rifle by any means.

Here are some more details for each of these Airsoft Gun:

KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol

• Type: Airsoft pistol.

• Manufacturer: KJ Works.

• Model: KP-18-TBC-CO2.

• Weight: 1.7 Pounds (775 grams).

• Length: 7.9 inches (20cm).

• Caliber: 6mm BBs.

• Propellant: CO2/GAS.

• Capacity: 22 rounds.

• Velocity: 410 FPS.

View fullsize

KJWorks M700 Take Down Gas Airsoft Sniper Rifle

• Type: Airsoft rifle.

• Manufacturer: KJ Works.

• Model: M700 Gas Takedown

• Weight: 7.9 Pounds (3600 grams).

• Barrel length: 21.9 inches (55.5cm).

• Caliber: 6mm BBs.

• Propellant: GAS.

• Capacity: 11 rounds.

• Velocity: 400-470 FPS.

View fullsize

I had a really fun time teasing out the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol. I’ve already done a full tabletop review covering all the specifications, features, pros, and cons, so check that one out if you want the detailed breakdown adn more closer up video. Today’s video is all about the performance. I’m running it through the chronograph to see how fast it really shoots, and then putting ten rounds on paper target at 30 feet to get a realistic look at its true accuracy.

For the velocity test, I loaded up a fresh 12-gram CO2 cartridge and standard 0.25-gram Airsoft BBs. The temperature during testing was about 24°C, or 75°F. Six shots over the chronograph came in at 296, 316, 299, 296, 301, and 294 feet per second, which works out to a 300 fps average. Not bad using the heavier .25 gram Airsoft BB’s. That’s a solid result for this full blowback platform, and on a warmer day adn using .20 gram Airsoft BB’s, you could probably squeeze a bit more speed out of it.

View fullsize

As per usual, accuracy testing was done from 30 feet out, shooting from a semi-rested position with my hands braced on a sandbag for stability and sitting on a stool in the back. The KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol printed slightly high, but windage was spot-on, and the string came in at roughly a 1.5-inch group. One shot wandered off a bit low as a flyer, but overall, the grouping was tight for a CO2 blowback Airsoft pistol, showing it’s more than capable of consistent performance.

Overall, I came away impressed with the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol. The single-action trigger is crisp and light, giving it a very clean break. The blowback is strong and sharp, adding to the realism, and the build quality looks and feels solid in the hand. With its accurate shooting, great trigger feel, and satisfying recoil, this pistol is an excellent pick for anyone after a high-quality CO2 blowback 1911 that looks, feels, and performs the part. Another winner form KJWorks!

• Buy the KJWorks Full Metal 1911 TBC CO2 Airsoft Pistol in Canada

• Buy 1911 Blowback Airsoft Pistols in the US

View fullsize

I finally got my hands on the new Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol that was introduced at this years SHOT Show, and I have already made my Table Top Review Video so make sure to watch that video for information on specifications, details, Pro’s and Con’s and more close up video… In this Field test Shooting video I focus on the performance of the Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol by testing the velocity out with my Chronograph, and I also shoot 10 rounds into a paper target setup 30 feet down range to see what the real world velocity and accuracy truly is.

Starting off with the Velocity portion the test, as always I use a brand new 12 gram CO2 along with standard 5.1 grain Steel BB’s. Temperature for the record was about 22 degrees Celsius or 72 degrees Fahrenheit. Here are the result of my multi shot Chronograph testing as it seemed to keep shooting faster and fast so I ended up using the last 5 shots for my average: 354, 349, 348, 343, 344 fps with an average of 348 fps. That was fairly close but just a bit under the 370 claimed fps. Warmer temperatures could for sure get this Blowback Airgun up to the slightly higher claimed fps.

View fullsize

Next I shot 10 rounds into a fresh paper target 30 feet down range using a semi-rested shooting position, with my hands resting on a sand bag up front, and sitting on a comfortable stool in the back, for somewhat stable shooting. There is always going to be a bit of human factor involved, but I seemed steady on this day, and I did get a nice result for a Blowback CO2 Air Pistol. The Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol shot good for me out of the box. The grouping spread out about 2 inches total well center up and down, just a hair above the bullseye but did wonder off to the left a little bit. Still a very good result for a blowback Airgun.

I was very pleased with the performance of the Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol. It had a lot more blowback action than I was expecting as the slide spring did feel kind of lazy to me when releasing it at first. The velocity was close to the mark and for sure as claimed in a warmer environment, and the accuracy was as good as you are going to get with a blowback BB Pistol. I didn't even mind the double action trigger at all as the first portion of the trigger is very light with almost no friction and even the release is not very heavy but for sure heavier than a true Single Action Trigger. I also like that you are going to get a lot more magazines worth of shots from a single CO2 out of the Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol with it’s semi blowback action and magazine design that seals off the BB into the breach area of the barrel. If you are OK with a DO trigger on a Glock, then I would suggest you chose the Glock 17 MOS Semi Blowback over the Glock 19 MOS Full Blowback simply for the higher fps, better CO2 efficiency and slightly improved accuracy.

• Buy the Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol in Canada

• Buy Glock Airguns in the US