View fullsize

In this review, we are looking at two crossbows that honestly shouldn’t really be compared, but that’s exactly why this comparison is interesting. On one end, we have the Steambow M10, a compact, magazine-fed, fast-shooting crossbow built for fun, training, and high repetition shooting. On the other, the CenterPoint AT400, a full-size, high-powered compound crossbow designed for serious hunting applications.

Aside from both launching bolts/arrows, these two platforms sit at completely opposite ends of the spectrum. The goal here is not to declare a winner, but to help you decide which one actually fits your use case, or if you might want both.

Key Differences Overview:

Steambow M10

The Steambow M10 is a compact repeating crossbow designed more for fun, training, and high-volume shooting. It uses a magazine-fed system that can hold 10 bolts, allowing for very fast follow-up shots. Depending on the limb setup, it can reach speeds of up to around 200 FPS and produce approximately 10 to 15 foot-pounds of energy. Its lighter draw weight options and easy cocking system make it beginner-friendly and much less physically demanding to use. Overall, the M10 is best suited for target shooting, casual use, and potentially small game with the right setup.

CenterPoint AT400

The CenterPoint AT400 is a full-size compound hunting crossbow built for serious power and hunting use. Unlike the M10, it is a single-shot platform that focuses on accuracy, penetration, and range rather than fast repeat shooting. It sends arrows downrange at about 400 FPS and delivers close to 150 foot-pounds of energy, putting it in an entirely different class. With its roughly 200-pound draw weight, it requires much more effort to cock and reload, usually with a rope or crank system. This makes it better suited for medium to large game hunting, where power and shot placement matter far more than speed.

Side-by-Side Summary

If you want something lightweight, compact, fast, and easy to shoot often, the Steambow M10 is the better fit. If your main goal is hunting and you need maximum power, longer range, and serious downrange performance, then the CenterPoint AT400 is clearly the more appropriate choice. Even though both are crossbows, they are built for very different types of users and very different shooting experiences.

Power & Performance

The biggest separation between these two comes down to raw power.

• The Steambow M10 delivers up to about 10–15 foot-pounds of energy, depending on limb configuration and bolt weight. It’s comparable to higher-end airguns or paintball-level power.

• The CenterPoint AT400, by contrast, produces close to 150 foot-pounds of energy and launches arrows at around 400 FPS.

That’s not a small difference, it’s an entirely different category.

Real-world comparison:

• M10 = backyard shooting, small game potential

• AT400 = deer, and potentially even elk with proper shot placement

This is essentially the difference between a BB gun vs a hunting rifle in terms of role and impact.

View fullsize

Shooting Experience:

Steambow M10

• Magazine-fed (10 bolts)

• Extremely fast follow-up shots

• Break-action style cocking (very quick)

• Great for drills, repetition, and skill building

• Minimal effort required

You can realistically fire 10 shots in about 10 seconds, making it a very engaging and fun platform.

CenterPoint AT400

• Single-shot system

• Requires rope cocking or crank system

• Significant physical effort (200 lb draw)

• Slow reload (often 30–60+ seconds)

This is a deliberate shooting experience, not something designed for volume or speed.

Use Case Breakdown:

Steambow M10 – Best For…

• Backyard shooting (with proper backstop)

• Target practice

• Tactical-style drills

• High repetition training

• Casual and frequent use

• Lower-cost shooting (especially with rubber ball version)

View fullsize

You can even use:

• Rubber balls (low cost, reusable)

• Lightweight bolts

• Indoor-friendly setups (with proper safety)

CenterPoint AT400 – Best For…

• Hunting (deer and potentially larger game)

• Long-range accuracy

• Maximum penetration and power

• Purpose-driven shooting

This is not a casual-use product, you typically bring it out when it matters.

Ease of Use & Physical Demand:

Steambow M10

• Very easy to cock (even at lower draw weights)

• Beginner-friendly

• Lightweight (~compact platform)

• Minimal fatigue

View fullsize

CenterPoint AT400

• High effort required

• Needs cocking tools (rope or crank)

• Physically demanding

• Slower workflow between shots

Key takeaway:
Anyone can pick up and use the M10 easily. The AT400 requires more commitment, strength, and practice.

Size & Portability

Steambow M10

• Compact and lightweight

• Can be partially disassembled easily

• Backpack-friendly

• Ideal for mobile use

CenterPoint AT40

• Large, fixed structure

• Not easily transportable without a case

• Designed for field carry, not casual portability

Ammo & Cost of Ownership:

View fullsize

Steambow M10

• Bolts are smaller and cheaper

• Rubber ball version = extremely low cost

• Less wear and tear overall

• High reusability

CenterPoint AT40

• Arrows are larger and more expensive

• More prone to damage/loss at high speeds

• Requires maintenance and replacement over time

Value Consideration:

Interestingly, both fall into a similar price range (~$400–$500), but value depends on usage frequency:

• M10 → Likely used often → Higher practical value

• AT400 → Used less frequently unless hunting regularly

If something sits unused, its value drops regardless of price.

View fullsize

Who Should Buy Each?

Choose the Steambow M10 if you…

• Want fun, fast shooting

• Plan to shoot frequently

• Prefer low effort and ease of use

• Don’t need high power

• Enjoy tactical or training-style shooting

Choose the CenterPoint AT400 if you…

• Are hunting (especially deer or larger game)

• Need high power and penetration

• Value accuracy and range

• Don’t mind slower reload times

• Are comfortable with physical effort

View fullsize

Final Thoughts

These two crossbows are not competitors—they are tools for completely different jobs.

• The Steambow M10 is about frequency, fun, and versatility

• The CenterPoint AT400 is about power, precision, and purpose

If anything, this comparison highlights that you may not need to choose one over the other, you might actually benefit from having both ends of the spectrum covered.

If neither fits perfectly, then the real answer may be to look for something in the middle.

Where to Buy

Both of these crossbows (or similar models) are typically available through:

• Buy Steambow M10 in Canada

• Buy CenterPoint AT400 In Canada

• Buy in the US

View fullsize

In this table top review, we’re taking a close look at the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This model fits into a long lineage of classic lever-action BB rifles, alongside well-known options like the Daisy Red Ryder and the Marlin variants from Crosman and Umarex. These rifles all share a similar concept, simple, spring-powered, lever-action BB guns designed for training, plinking, and beginner shooters, but each brings its own subtle differences in materials, styling, and features.

Key Specifications

• Model: Air Venturi Annie Oakley Lil’ Sure Shot

• Type: Lever Action Spring Piston BB Rifle

• Caliber: 4.5mm Steel BB

• Power Source: Spring (No CO2 Required)

• Velocity: Up to 350 FPS

• Magazine Capacity: 550 Round Internal Reservoir (Gravity Fed)

• Action: Lever Action

• Safety: Cross Bolt Safety

• Barrel: Smoothbore

• Stock: Stained Solid Wood

• Construction: Primarily Metal with Some Plastic Components

• Weight: Approx. 3.3 lbs

• Overall Length: ~36.25 inches

• Optics Rail: Removable Weaver/Picatinny Style Mount

First Impressions & Build Quality

The Annie Oakley Lil’ Sure Shot stands out with its classic Western styling, enhanced by engraved Annie Oakley branding on the wood stock. It’s a step above many entry-level BB rifles thanks to its real wood stock and metal lever, giving it a more authentic and durable feel compared to fully plastic alternatives.

Most of the rifle is metal and wood, though there are a few plastic components:

• Trigger

• Front sight (on the newer version)

• Adjustable portion of the rear sight

• Removable scope rail

Overall, it feels solid in the hands, lightweight, and well-balanced, especially for younger shooters or anyone new to lever-action rifles.

View fullsize

How It Works

This is a spring-piston, lever-action BB rifle, meaning:

• No CO2 or gas is required

• Each shot is powered by cocking the lever

• BBs are stored in a large internal reservoir

• You must tilt the rifle upward to gravity-feed BBs into position

With a 550-round capacity, you can shoot for quite a while before needing to reload, your arm will likely get tired before you run out of ammo.

Handling & Usability

This rifle is clearly designed with accessibility in mind:

• Lightweight (3.3 lbs) makes it easy to handle

• Shorter length and pull fits smaller shooters well

• Moderate cocking effort is manageable for beginners

• Lever action slows firing rate, adding a safety advantage for new users

Rifles like this are excellent for training because:

• They are easier to aim than pistols

• They encourage controlled shooting

• They are not overly powerful

Even for experienced shooters, these are simply fun and inexpensive for backyard plinking.

Sights & Optics

Out of the box, the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle includes:

• Fixed front sight (plastic on newer version)

• Adjustable rear sight (elevation only)

One notable feature is the removable Weaver-style rail, allowing you to:

• Mount a red dot or scope

• Or remove it for a more traditional look

Keep in mind the rail is plastic, so care should be taken when mounting optics.

View fullsize

Comparison to Similar BB Rifles

This rifle sits in the same category as:

• Daisy Red Ryder – The original classic

• Umarex Marlin Lever Action – Slightly more adult-oriented design

• Crosman Marlin (older models) – Direct Red Ryder competitor

All of these:

• Use lever-action spring systems

• Have internal BB reservoirs

• Shoot in the ~300–350 FPS range

The Annie Oakley version distinguishes itself with:

• Better visual styling

• Wood and metal construction

• Optional optics mounting

New vs Older Annie Oakley Version (Key Differences)

If you come across different versions, here are the main distinctions:

Newer Version:

• Longer barrel

• Plastic front sight

• Larger loading port (easier to load)

• Metal Lever

• Brighter, more polished wood finish

View fullsize

Older Version:

• Shorter barrel

• Metal front loading system (rotating port)

• Metal front sight (more durable)

• Plastic Lever

• Slightly darker, more matte wood

Both should perform similarly, but the newer version is a bit more refined with that quality all metal lever.

Pros

• Lightweight and easy to handle

• Real wood stock and metal lever construction

• Large 550-round capacity

• No CO2 required (low maintenance and inexpensive to shoot)

• Removable optics rail for flexibility

• Classic Western styling with Annie Oakley branding

• Great for beginners and younger shooters

Cons

• Plastic front sight (new version)

• Lower power compared to CO2 rifles

• Rear sight only adjustable for elevation

• Slightly higher price than some entry-level similar BB rifles

• Less realistic than shell-ejecting lever-action models

Final Thoughts

The Air Venturi Annie Oakley Lil’ Sure Shot is a well-built, visually appealing lever-action BB rifle that blends classic styling with modern usability.

It’s ideal for:

• Beginners and younger shooters

• Backyard plinking

• Anyone wanting a simple, reliable and fun BB rifle

While it doesn’t aim for full realism like higher-end shell-ejecting models, it delivers where it matters, ease of use, affordability, durability, and fun factor.

Available at:

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

Also check out ReplicaAirguns.com for additional articles, photos, and video reviews.

View fullsize

In this table top review, we take a close look at the Steambow B08 .68 Caliber Tactical Crossbow, a compact and versatile system designed for shooting rubber balls, paintballs, or foam projectiles. This model is particularly suited for controlled environments like indoor ranges (such as a sea can setup or even basement or backyard), thanks to its relatively moderate power and flexible ammunition options.

A full shooting test will follow separately, but for now, let’s break down the specifications, features, and what comes in the box.

Specifications

• Model: Steambow B08

• Caliber: .68 (rubber balls, paintballs, foam balls, etc.)

• System Type: Recurve crossbow

• Draw Weight: 35 lbs (standard included limb)

• Velocity: Up to 260 FPS (manufacturer claim)

• Energy: Approx. 7 ft-lbs (up to ~15 ft-lbs with stronger limbs)

• Magazine Capacity: 8 rounds (removable)

• Weight: Just under 4 lbs

• Length: 24.2 inches

• Width: 3.15 inches (body, excluding limb span)

• Height: 8.3 inches

• Materials: Fiberglass, metal, and polymer construction

• Stock: AR-style adjustable (6-position) with cheek rest and rubber butt pad

The B08 is distributed by Steambow GmbH (Austria) and is built on a modular platform compatible with other Steambow systems like the M10.

View fullsize

Key Features

Modular Platform

One of the standout aspects of the B08 is its modular design. The lower receiver is identical to the Steambow M10, meaning you can swap uppers to shoot either:

• .68 caliber balls (B08 upper)

• Crossbow bolts (M10 upper)

This gives users flexibility to adapt the platform for different uses.

Quick Change Limb System

The included 35 lb limb is easy to swap out:

• Secured by a single bolt

• Can be upgraded up to heavier options (up to ~120 lbs available)

• Allows tuning for power vs. ease of cocking

Magazine-Fed Repeater System

• 8-round removable magazine

• Spring-fed system with follower

• Auto-loading mechanism (not semi-auto, but fast cycling)

The system works by “breaking” or pulling back the stock, which:

• Cocks the string

• Loads the next round

• Prepares the trigger

Cocking Mechanism

• Shoulder-supported operation

• Pull stock inward to cock

• Very easy with 35 lb limb

• Allows relatively fast follow-up shots once familiar

Sighting System

• Fiber optic front sight

• Rear alignment via top trough channel

While simple, it works well for close-range shooting. However, the included Picatinny rails (top and bottom) allow for:

• Red dots

• Scopes

• Tactical accessories

Build & Ergonomics

• Polymer lower with reinforced components

• AR-style adjustable stock

• Adjustable cheek rest

• Rubber butt pad

• Included foregrip (user-installed)

Overall, the Steambow B08 .68 Caliber Tactical Crossbow has a solid, lightweight feel while still maintaining good handling characteristics.

What’s Included in the Box

The B08 comes well-packaged with multiple internal boxes and includes:

• Steambow B08 main unit

• 35 lb limb

• Foregrip

• 8-round magazine

• 25 “foam” balls (closer to hard nylon in feel)

• Protective shooting glasses

• Allen keys (for assembly and adjustments)

• String wax

• Extra string

• Mounting hardware

• Instruction manual

View fullsize

Note:
A small locking component for the upper assembly may come separate and is not clearly explained in the manual, but is required for proper function.

Operation Overview

• Load magazine with up to 8 rounds

• Insert magazine into front housing

• Cock by pulling stock inward

• Fire using single-action trigger

The ball is held in place by a simple groove and string system, guiding it forward during firing.

Performance Notes (Initial Impressions)

• Smooth and reliable operation

• Easy to cock with 35 lb limb

• Suitable for indoor shooting environments

• Compatible with various projectile types

Heavier limbs will:

• Increase velocity and energy

• Require more effort to cock

View fullsize

Pros

• Lightweight and compact (under 4 lbs)

• Modular system (compatible with M10 platform)

• Magazine-fed repeater design

• Easy cocking with included limb

• Quick-change limb system

• Picatinny rails for accessories

• Comes with useful extras

• Quiet operation

• Reusable ammunition options

Cons

• Higher price point

• No traditional rear sight included

• Learning curve for efficient operation

• Included limb may feel underpowered for some users

View fullsize

Final Thoughts

The Steambow B08 offers a unique blend of crossbow mechanics and tactical styling, combined with modular flexibility and relatively safe indoor usability. It’s especially appealing for users who want:

• A reusable ammo platform

• Quick follow-up shots

• Expandability with other Steambow systems

While the included 35 lb limb keeps it easy to use and accessible, upgrading the limb will unlock more performance potential for those looking for higher energy output.

Availability

Available through Replica Airguns:

• Buy the Steambow B08 .68 Caliber Crossbow in Canada

• US Archery Buying Options

A full shooting test and performance breakdown will follow in a separate review.

Replica Airguns takes a step back in time to share how everything began, long before the channel, website, and stores grew into what they are today. The journey started around 2006, just a year after YouTube first launched. At the time, online video was still in its infancy, with low-resolution clips, shaky footage, and minimal production quality being the norm.

Mike created the very first video simply for fun. It featured a modified Umarex Walther PPK BB gun that Mike had altered for full-auto shooting. Edited in iMovie on a Mac and uploaded in low resolution (under 640×480), the video wasn’t intended to be anything more than a casual experiment. However, after sitting online for a few months, it unexpectedly reached around 100,000 views, an impressive number for that era, when far fewer creators were uploading content and viral videos were rare.

That early success revealed something important: there was real interest in Airguns and BB gun content. From there, Mike purchased more Airguns (to his wife’s disapproval), more videos were created, and the foundation for a focused channel began to take shape. A few years later, the project became more serious, evolving into a dedicated platform and eventually transitioning into the Replica Airguns brand you see today!

Over time, the brand expanded into multiple websites, ReplicaAirguns.com, ReplicaAirguns.ca, and ReplicaAirguns.us, along with a large video library. Although the channel faced setbacks, including being removed from YouTube at one point, the content continued to live on through platforms like Vimeo and Rumble. Now, with nearly all videos being restored back to YouTube, the library is close to fully rebuilt.

The original video that started it all was thought to be lost for years, buried on old storage drives. Recently rediscovered, it has been enhanced using modern AI tools to improve clarity while still preserving its original look and feel. Despite its dated quality, it represents the true starting point of the Replica Airguns journey.

For viewers interested in Airguns, including BB guns, Airsoft, Pellet guns, and more, the channel and websites continue to offer extensive content and product availability across both Canadian and U.S. online stores.

View fullsize

Today’s unboxing, we’ll call it the March 2026 Unboxing Preview!

I had no idea what was in this box, and honestly, I like it that way. It makes every delivery feel a bit like Christmas. A box shows up from the warehouse, I crack it open, and my job is to let you know what’s inside and what might be coming soon to the store. A lot of the time these are products we’ve never carried before. Not always, but usually there’s at least something new or unexpected in the mix.

As usual, getting into the box was its own little challenge. Good thing I had my “box cutter “ handy. Once I finally got through the packaging, it was clear right away this one had some interesting stuff inside.

What was in the box?

View fullsize

1) Annie Oakley Lil’ Sure Shot BB Rifle

First out of the box was something a little different: the Annie Oakley Lil’ Sure Shot.

This one is brought to you by Air Venturi / Western Justice, and it’s essentially a Red Ryder-style lever action BB rifle with some nice Western-themed touches. Right away, it stood out with the stained solid wood stock, wood forearm with engraving, and engraved Annie Oakley artwork.

Here are some of the listed specs and features:

• Ammo: .177 caliber / 4.5mm steel BBs

• Action: Lever cocking, spring piston

• Barrel: Smoothbore

• Overall Length: 36.25 inches

• Capacity: 550 BBs

• Claimed Velocity: Up to 350 FPS

• Weight: 3.3 pounds

• Max Shooting Distance: 212 yards

Once I opened it up, it definitely gave me that familiar Red Ryder / Marlin Cowboy vibe, but it feels like it may be just a bit bigger overall. Maybe a slightly longer stock, maybe just a bit more substantial in the hands. I’ll have to compare it side-by-side with a Red Ryder later to know for sure.

A few things I noticed right away:

• It has a metal lever

• Metal frame

• Metal barrel

• A plastic muzzle tip

• A rear sight that appears adjustable

• And surprisingly, a Weaver-style rail on top for mounting an optic

That top rail is actually a nice touch. You could absolutely throw a small scope on this if you wanted to, and why not? It makes for a fun little plinker, and the engraving gives it some real visual appeal too.

I’ve always had a soft spot for these little lever-action BB rifles. They’re just fun. They’re simple, classic, and a great way to introduce younger shooters to safe rifle handling. Rifles like this tend to be a bit easier for beginners since they’re not as quick to wave around as a pistol.

So yes, this one looks like it should be a lot of fun, and I’ll be doing both a Tabletop Review and a Field Test Shooting Review on it soon.

View fullsize

2) .68 Caliber Nylon Balls (100 Count)

Also in the box was a pack of 100-count .68 caliber nylon balls.

These feel noticeably heavier than the rounds I was using in my earlier T4E TC68 review. The previous ones were around the 2.8 to almost 3 gram range, and these new ones feel more like they’re getting up into the high 3 gram to 4 gram area.

That added weight could make them especially interesting to test in the TC68, since more projectile mass can sometimes translate into more energy on target, even if velocity comes down a bit.

So these should be fun to test out, and as it turns out, they may have arrived for a very good reason…

3) Steambow B08 / .68 Caliber Rubber Ball Crossbow Platform

This was the big surprise in the box, and definitely the highlight item.

If you watched my SHOT Show coverage, then you may remember this one from the Steambow booth. It’s a really cool product: basically a magazine-fed rubber ball shooting crossbow-style launcher in .68 caliber.

I had already gotten a chance to try it at SHOT Show, and Steambow was great about letting us check it out there. So it was pretty exciting to see one show up here for review.

Some of the box highlights:

• Detachable magazine

• 8-shot capacity

• .68 caliber projectiles

• Includes 25 foam balls

• Comes with a 35-pound limb

• AR-style adjustable buttstock

• Protective shooting glasses included

This product has a lot going on in the box. Once I opened it up, there were multiple components and accessories packed inside, including:

• Main body / receiver section

• Foregrip

• AR-style buttstock

• Upper receiver section with included magazine

• 35-pound limb

• Bow string and related accessories

• Lubricant / wax for the string

• Mounting hardware and tools

• Protective glasses

• 25 included foam balls

There’s definitely going to be some assembly involved before I can do a full review, so that will be part of the tabletop video.

The main unit itself feels solid and substantial. It has some good weight to it, and overall it looks like a very cool design. The included 35-pound limb should offer a decent balance between usability and performance. At SHOT Show we were only using a lighter 25-pound setup, which was very easy to draw, great for casual target practice, but obviously not the high-performance option.

One of the things I like about this platform is that it gives you that crossbow-style shooting experience while using reusable .68 caliber balls. That can make it easier and cheaper to shoot compared to bolt-style systems, where each arrow or bolt can get expensive fast, especially if you miss the target and damage one.

And since I now also have those heavier nylon .68 caliber rounds from the same box, I should be able to test both the included foam balls and the heavier options to see how they compare.

This one should make for a very interesting review.

Final Thoughts

So that was the March 2026 mystery box. We’ve got two very different products here:

• The Annie Oakley Lil’ Sure Shot, which looks like a fun, classic lever-action BB rifle in the Red Ryder tradition

• And the Steambow B08 / .68 Caliber Rubber Ball Crossbow Platform, which is something a little more modern, tactical, and definitely unique

Both of these are getting the full treatment, so expect Tabletop Review and Field Test Shooting Review videos for both products.

The Annie Oakley should be a blast to shoot, especially if it performs anything like the other Red Ryder-style guns I’ve reviewed over the years. And the Steambow system looks like it could be a really practical and fun way to enjoy crossbow-style shooting without the cost and fragility of traditional bolts.

I’ve still got a few earlier products to finish up as well, but I’ll be getting to these as quickly as I can.

Thanks for watching another Replica Airguns video. Don’t forget to subscribe, and check the links in the description for products available in our Canada and US stores.

For Canada, visit ReplicaAirguns.ca
For the US, visit ReplicaAirguns.us

And if you’re looking for other products including Airguns, BB guns, pellet guns, airsoft guns, blank guns, and accessories, be sure to check out both stores as well.

Michael here from Replica Airguns with an important public announcement, especially for those of you who mainly follow us on Vimeo or Rumble.

If you are watching this on YouTube, then you probably already know the news, we are finally back on YouTube. However, a lot of our long-time viewers may not be aware of this yet, so if you have the opportunity to help spread the word, it would really mean a lot to us.

What Happened to Our Original YouTube Channel

Several years ago our original YouTube channel was suddenly terminated due to what YouTube described as a “counterfeit claim.” Unfortunately, we were never given any clear explanation about what specific video or product triggered the action.

At the time, the Replica Airguns channel had been built over many years and included over 1,000 videos, millions of views, and hundreds of thousands of subscribers. Losing the channel meant losing our entire YouTube audience overnight.

To this day, we still do not know exactly what product or video led to the termination. Replica Airguns does not sell counterfeit products. All of the airguns and replicas we review and sell come from legitimate manufacturers such as:

• Umarex

• ASG

• Crosman

• SIG Sauer

• and other major licensed manufacturers

These companies produce officially licensed replica versions of real firearms, which is why they look authentic. The difference is that they shoot BBs, pellets, airsoft, or paintball rounds, not real ammunition.

Unfortunately, once the termination occurred, there was no real way to speak with a person or properly dispute the decision. Like many others at the time in the airgun community, we were caught up in a period when gun-related channels were facing heavy restrictions or removals.

A Fresh Start on YouTube

The good news is that we are rebuilding.

Over the last couple of months I have been gradually uploading our videos back to YouTube. The process is a bit slow since it requires moving videos over individually, but it is working and the library is growing quickly.

So far:

• 800+ videos uploaded

• 1,300+ total videos planned

• 130+ new subscribers

• 10,000+ views and growing

Considering we are essentially starting from scratch again, this is encouraging progress.

Why Uploading Takes Time

Some viewers have asked why all the videos are not already up.

The main reason is that the transfer process from Vimeo to YouTube still requires a bit of manual work. Each video needs to be shared individually, which takes several clicks and some time for page refreshes and processing. Moving around 50 videos can take close to an hour or more, so it is something I do gradually every few days.

The good news is that once a video is sent to YouTube, the rest of the upload and processing happens automatically.

What to Expect

While the archive videos are being uploaded, new videos can sometimes get buried under the older uploads. Once the full library is back online, I will be reorganizing everything into playlists, including:

• Tabletop Reviews

• Field Test Shooting Videos

• Pellet Gun Reviews

• Airsoft Reviews

• Paintball Markers

• Other replica airgun categories

This will make it much easier to find specific content again.

Help Us Rebuild the Channel

If you have been following Replica Airguns for a long time, you know how much work went into building the original channel. Rebuilding it will take time, but with your help we can get the community back together again.

If you can, please help by:

• Subscribing to the new YouTube channel

• Sharing the channel with other airgun enthusiasts

• Letting people know Replica Airguns is back

You can find us on YouTube under:

RA Returns - @RAReturns

The name simply stands for Replica Airguns Returns.

Follow Replica Airguns

You can also find Replica Airguns here:

• Website & Blog: ReplicaAirguns.com

• Canada Store: ReplicaAirguns.ca

• US Store: ReplicaAirguns.us

We also post updates on Facebook, Twitter/X, and Instagram.

Thank you to everyone who has supported Replica Airguns over the years. We are excited to rebuild the YouTube channel and continue producing the airgun reviews, field tests, and content that this community has always enjoyed.

Stay tuned - there is a lot more content coming soon.

View fullsize

I stopped by the Blue Line booth and Connor showed me a line of peppered gel deterrent products they’re hoping to bring into Canada as dog-spray style options (with stronger versions available in the U.S., depending on regulations).

The key difference vs typical pepper spray: these use a jet/propulsion system that fires a more directed stream, designed to reduce blowback and improve placement.

JPX2 Gen 2 (2-shot)

• Takes a 2-shot cartridge; each trigger pull fires one shot.

• The cartridge is replaceable after use (Connor emphasized it’s essentially disposable once fired).

• Connor said range is about 20 ft; manufacturer specs cite roughly 5–23 ft depending on conditions.

4-shot option (JPX4-style)

Connor also showed a 4-shot version aimed at law enforcement markets, but they’re hoping it can be available more broadly as well.

Guardian Angel 4 (compact 2-shot)

A small two-shot, pocketable option with a simple safety and clip—intended as a quick, lightweight grab-and-go device.

Connor also mentioned optional laser sight accessories for better aiming, and that all versions are around the same practical range envelope.

If these can be brought in cleanly for Canada, they look like a good fit for a store + review pipeline: JPX2 Gen 2 for the main feature set, JPX4 for the multi-shot crowd, and Guardian Angel 4 for people who want something ultra-compact and simple.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

We stopped by the SABRE booth and spoke with Ashley about their Home Defense Pepper Launcher, specifically a second-generation version that (per Ashley) isn’t released yet. With less-lethal options getting more attention in Canada, I wanted to see what’s new, what specs we’re looking at, and whether it’s something we might be able to bring in for reviews and potential store availability.

What’s new with the Gen 2 (as described in the interview)

• “Quick Pierce” magazine system: Ashley demonstrated a faster “pierce and go” style setup, hit the control and you’re ready to aim.

• Pressure indicator: After piercing, an indicator pops out; as CO2 is depleted it retracts, giving you a visual cue that pressure is running out.

• CO2 release button: A control to vent the CO2, then remove the magazine.

Core platform details (current production specs for the .68 launcher family)

These are the commonly listed specs for the current .68 caliber SABRE launcher:

• .68 caliber projectiles

• 7-projectile magazine capacity

• Fiber optic sights (front/rear adjustable)

• Stated velocity up to ~350 FPS

• Range: direct impact effectiveness noted around 60 ft (18 m), with projectiles described as breaking/dispersion capability out to 175 ft (53 m)

Ashley also noted SABRE’s projectiles have a heavier payload than some competitors (in her words) to help with “strength” and accuracy.

Magazines, CO2, and shot count (from the interview)

• CO2 goes into the magazine

• 7 projectiles per magazine

• Two magazines per CO2 (so 14 shots)

Canada angle (what matters for importing)

• Ashley noted the current model is around ~20 joules, and said a Canadian version would likely need to be lower(depending on classification/import requirements).

• SABRE’s own online store states they do not ship internationally, including Canada (so any Canada availability would likely be via distribution/import channels rather than direct-to-consumer shipment).

If we can make the Canada piece work, this looks like a strong candidate for a hands-on review, especially because it’s .68 caliber, 7-round, and built around visibility (fiber optics) and ease of use.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

We didn’t catch this one at the Steambow booth, we were out at the SHOT Show indoor range checking out Steambow again, Tyler walked us through their brand-new-for-2026 B08: a magazine-fed .68 caliber ball launcher/crossbow that’s just starting to hit availability.

• New B08 .68 cal “ball launcher” platform (2026): This is a .68 caliber system designed to run .68 spherical projectiles (paint, foam/nylon, and pepper/irritant-type balls were all discussed as compatible options, depending on local rules).

• 8-shot, removable, pre-loadable magazine: The B08 uses a spring-fed 8-round magazine that inserts at the front. Tyler’s demo made it clear you can pre-load multiple mags and keep shooting quickly.

• Simple, repeatable action (easy to learn fast): The manual of arms is very “repeat-and-go”: load the mag, cock it, shoot, then cycle and repeat. Steambow describes the system as their familiar AR-Series quick-tilt/quick-clamp style for fast reloading.

• Ships mild, but can be upgraded for more power: The one I tested was using a 35 lb limb, but it’s built to accept other AR-Series limbs (stronger options sold separately). Tyler specifically said swapping to a much heavier limb can turn it into a high-velocity setup (he referenced up to a 150 lb limb and around 300 fps in his talk).

• Projectile flexibility is the whole point: If you already have .68 cal paintballs or similar at home, that’s the target “ecosystem” this is built around (so long as they’re spherical).

• Important safety + legal reality check: Steambow is very explicit that once you move beyond the “low power + soft balls” envelope, the B08 can become very dangerous, they warn that harder/heavier projectiles (including steel balls) raise risks like severe injury/lethality and ricochets, and that irritant/pepper-type rounds may be legally restricted depending on country.

Tyler’s range demo made the main selling points obvious: magazine speed, easy operation, and a huge range of .68 ball options. If we can get it lined up for Canada, it looks like a very versatile multi use platform, especially for anyone who wants .68 cal fun adn then some, without relying on CO2 or HPA.

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

I was in Las Vegas last week for SHOT Show, filming content for Replica Airguns, but I wanted to post a quick update so you know what I was up to.

I went to SHOT Show to connect with people in the industry and record a bunch of interviews with vendors and companies, Airgun and aintball brands included (and more). I ended up filming about seven interviews, and now that I’m home I’ve got a lot of great footage to go through.

I was in Vegas with my buddy Steve (the guy behind the camera). Once the filming was wrapped, we spent some time enjoying the city after a busy week. We also did a few things outside of SHOT Show, because if you’re in Vegas, you might as well experience it.

In this video, we’re at the Montecristo Cigar Bar inside Caesars Palace, winding down with a nice port and a cigar.

Stay tuned,now that I’m back, I’ll start editing and posting those interviews. If you want to watch the SHOT Show interview series, head over to Replica Airguns or watch on our Vimeo and YouTube channels as I post them…

Today we’re looking at the A&K M1873R (the R version). There are a few different versions of this rifle in the lineup (some more compact, some more full-length), and the manual actually shows the variations so watch the video where I point that out.

This is a Table Top Review only, so we’re focusing on specs, details, and a walk-around. I was hoping to follow this up quickly with a Shooting / Field Test Video, but my sample has an issue: it’s leaking gas when I try to fill it (I tested with propane/green gas). I’ll need to sort that out first (repair or replacement), so the field test will have to wait until that’s resolved.

Here some links where you can buy the A&K M1873R in our Canada Replica Airguns and US Replica Airguns Stores

View fullsize

Specifications

• Manufactured By: A&K – Made in China

• Type: Gas-powered airsoft lever action rifle (non-blowback)

• Ammunition: 6mm plastic airsoft BBs

• Power Source: Green gas / propane (internal gas reservoir)

• Action: Lever action / manual cycle (one shot per lever cycle)

• Capacity: 25-round internal magazine (side loading gate)

• Velocity: Approx. 350–400 FPS with 0.20g BBs (temperature/BB weight dependent)

• Hop-Up: Adjustable hop-up system

• Build / Materials:

  • Real wood stock

  • Metal receiver and barrel assembly

  • M-LOK handguard (tactical “modern western” styling)

  • Top Picatinny rail (optics ready)

  • Brass butt plate

• Controls / Features:

  • Enlarged lever loop (glove-friendly)

  • Integrated lanyard ring / sling hoop

• Weight: 4.8 lbs (2.18 kg)

• Overall Length: 27.2 inches (69 cm)

• Barrel Length: 8 inches (20.3 cm)

In the Box

• A&K M1873R rifle

• Mock suppressor (cosmetic)

• Speed loader (you’ll want this for loading the internal magazine)

• Tools / Allen keys

• Small bag of airsoft BBs

• Simple 1-page manual

View fullsize

Manual Notes: Different Versions

The manual shows several versions of this lever action platform. Some are more compact and some are more traditional full-length lever rifles. There’s also a version that appears to run without the longer front barrel extension setup, which, honestly, is the version I’d personally lean toward since the included mock suppressor is mostly cosmetic.

Walk Around

This is a really sharp-looking rifle, it has that classic lever gun vibe thanks to the real wood stock and brass butt plate, but then it mixes in a modern tactical look with the M-LOK hand-guard and top Picatinny rail.

A few key points when handling it:

• No sights included: there are no iron sights on this rifle, so you’ll want to add your own optic (red dot, scope, or rail-mounted irons).

• M-LOK handguard + top rail: lots of freedom to build the look you want, keep it clean, or “tactical western” it up with accessories.

• Internal mag / side loading gate: loads like a real lever gun, through the side. The external profile stays clean (no big mag hanging out).

• Enlarged lever loop: easier to run with gloves or bigger hands, and it just looks right on this style of rifle.

• Sling / carry: it includes a metal lanyard ring / sling hoop, so carrying it is easy if you want it strapped while moving around.

View fullsize

Mock Suppressor and Gas Fill

The included “suppressor” is mainly for looks. It does have an orange front, and it doesn’t function as a suppressor (it’s not extending the inner barrel either).

Important practical detail: you’ll need to remove the mock suppressor to access the gas fill valve, which means you’ll want to keep the included tool (or something similar like a washer/coin that fits) with you.

Issue With My Sample: Leaking Gas

My review sample is leaking at the fill area. It looks like someone may have tried to seal it (there appears to be silicone or residue), and there are a few scratches that make me suspect this unit could have been a return. I tried tightening it, but it still leaks and it may be stripped.

This is not what you should expect out of a normal new unit, but I want to mention it because it’s the reason I’m holding off on the field test until it’s fixed.

View fullsize

Pros

• A lever action gas Airsoft rifle is just plain fun (and there aren’t tons of these around)

• Classic look with real wood + brass butt plate, but still has modern utility with M-LOK up front

• Feels solid in the hands (doesn’t feel cheap)

• Top Picatinny rail makes optics easy (and you’ll want optics since there are no sights)

• 25-round internal magazine keeps the outside profile clean

• Enlarged lever loop is great for gloves or cold-weather play

• Lanyard ring / sling hoop makes it easy to carry

• Speed loader makes loading fast once you get the hang of it

• You can run it more compact by skipping the mock suppressor (it’s optional)

Cons

• The internal 25-round magazine is awkward to load without the speed loader, don’t lose it

• Green gas performance is temperature sensitive, which can affect consistency in colder weather

• Not a fast follow-up shooter, you must work the lever for every shot (part of the charm, but it’s a limitation)

• You’ll need to add your own sights/optic (none included)

• The included mock suppressor must be removed to fill gas, which adds a little extra handling

View fullsize

Final Thoughts

The A&K M1873R is a really cool “modern western” mashup, classic lever action styling with real wood and brass, but with M-LOK and a top rail so you can build it out however you want. Lever guns force you to slow down and actually enjoy the shooting experience, and that’s a big part of why they’re so popular (even outside of Airsoft).

Once I get the leak issue sorted on my sample, I definitely want to do the field test, because this is exactly the kind of unique platform that deserves to be shot and evaluated properly. On the table, it looks great, feels solid, and offers a lot of customization potential, you just have to go in knowing it’s lever-action manual cycling, it uses green gas/propane (so temperature matters), and you’ll need to add your own optic since there are no sights included.

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine

View fullsize

A quick public service announcement: we’ve added a newer accessories line to the store from Gear Stock, and it’s definitely worth a look if you’re into airguns, airsoft, or paintball.

Under Brands → Gear Stock on the website, you’ll find a variety of products including ammo, CO2, BBs, Airsoft BBs, .43 cal paintball, LiPo batteries, chargers, connectors, helmets, masks, and even butterfly-style trainer “knives” (combs and bottle openers).

View fullsize

Today I just want to highlight a few of the items:

• 6mm Steel Airsoft BBs – Heavy steel BBs for when you want more weight than standard aluminum 6mm BBs. A bottle of 500 is around $9.99, making them a solid option for tougher targets or stronger airsoft platforms.

• 4.5mm Copper-Plated Steel BBs – Available in 1,500 and 2,500 count bottles (around $6.99 and $9.99). Pricing is generally cheaper than many big brands like Umarex and Crosman, while still giving you a branded product.

• Gear Stock CO2 – Their 12g CO2 is priced very competitively, basically on par with our no-name CO2. A 25-pack is about $26.99 versus $24.99 for no-name, so for a couple of dollars more you get a name brand cartridge.

• 88g CO2 – Gear Stock is also supplying 88 gram CO2 cylinders. These are ideal for rifles or platforms where you want long runtime and more consistent velocity without constantly swapping 12g cartridges. Check under CO2 & accessories or the Gear Stock brand section for availability and pricing.

View fullsize

If you’re looking to stock up on ammo, CO2, and useful accessories at good prices, head over to replicaairguns.ca, go to Brands → Gear Stock, and see what’s in the lineup.

View fullsize

This isn’t an airgun, but it will show up in a least some of my airgun videos, you just won’t usually see it. The DJI Neo 2 is my new AI camera drone that I’ll be using for outdoor shooting segments, walk-around tests, and any time I need moving shots without a camera operator.

Up until now I’ve been using the original DJI Neo and the HoverAir X1 Pro Max. The HoverAir still has slightly better pure video quality, and the original Neo had decent AI features, but together they meant more gear to carry and more batteries to manage. The Neo 2 is the first drone that can realistically replace both for what I do on this channel.

I picked up the Fly More Combo, which includes the Neo 2, the RC-N3 controller, three batteries, a charging hub, and the antenna/transmitter module pre-installed. With three packs I can get roughly 35–40 minutes of real-world flying, which is more than enough to cover a shooting session.

View fullsize

The biggest upgrade over the original Neo is the two-axis gimbal. Instead of cropping the image to keep the horizon level when the drone tilts in the wind, the camera physically moves side-to-side and up/down. Combine that with updated processing and you get up to 4K 60 fps (and even 100 fps in 4K), which is perfect for smoother tracking shots when I’m walking, moving between targets, or doing action-style footage.

The Neo 2 is also loaded with sensors and obstacle avoidance: fisheye cameras on multiple sides plus a front LiDARunit. It does a great job of seeing trees, branches and other obstacles and routing around them, which is exactly what I need when I’m focused on shooting and talking, not flying.

View fullsize

For control, I can either use the phone app for quick AI “follow me” and smart shots, or the RC-N3 for longer-range, more traditional drone flying and higher altitude shots. There’s also a very cool gesture control system (I call it “Jedi mode”) where I can move the drone up, down, left, right, closer or further just by using hand signals, no need to stop recording or dig through menus.

Bottom line: you probably won’t see the DJI Neo 2 in many of my videos, but you’ll definitely see what it captures. It lets me add smoother tracking shots, aerial views and more dynamic angles to my Replica Airguns content, all without needing a dedicated camera person. For a solo creator who films a lot outdoors, it’s a very handy tool to have in the bag.

Type: Airsoft Rifle
Manufacturer: KJWorks
Model: M700 Take Down
Materials: Metal with textured synthetic stock
Weight: 7.5 pounds (3415 grams)
Barrel: Smooth bore barrel
Propulsion: Gas operated (Green Gas or Propane)
Action: Bolt
Ammunition Type: 6mm plastic Airsoft BB’s
Ammunition Capacity: 10–11 round metal magazine
FPS: Up to 450 FPS

View fullsize

Trigger Pull: The trigger on the KJWorks M700 Take Down Gas Airsoft Sniper Rifle performs as expected for a bolt-action style hunting or sniper rifle. Most of the work is done when operating the bolt, leaving your trigger finger with a light, short, and crisp pull to release the firing pin. This shlep a lot keeping everything steady since you can relax your grip adn really focus on your shot placement.

View fullsize

Accuracy: Be sure to watch my full Field Test Shooting Video for the KJWorks M700 Take Down Gas Airsoft Sniper Rifle to see its performance in detail. I only tested it indoors at my Sea Can range due to cold weather conditions, which aren’t ideal for gas guns. Shooting distance was limited to about 30 feet, but I plan to revisit this rifle outdoors in better weather for longer-range results. At 30 feet, the M700 produced a tight 1-inch grouping and averaged around 400 FPS using .25-gram Airsoft BB’s.
Note: I did encounter some magazine loading issues when fully loaded, BBs from the right side of the double-stack magazine occasionally jammed and didn’t feed properly into the breach.

View fullsize

Build Quality: The KJWorks M700 Take Down Gas Airsoft Sniper Rifle feels solid and well-made throughout. The fit and finish are good, and all the mechanical components functioned properly aside from the occasional BB feed issue. I like the textured synthetic stock and soft rubber butt pad. This rifle features a lot of metal construction, including the bolt, inner and outer barrel, magazine, sling and bipod mounts, trigger and guard, Picatinny rail, and safety. It feels robust and well-balanced overall.

View fullsize

Realism: The KJWorks M700 is modeled after the Remington 700 platform, giving it a very authentic hunting rifle look. The Airsoft version mimics the real firearm closely in both form and function. Since it’s powered by Green Gas rather than a spring, the bolt action is smooth, light, and realistic to operate. All the parts that would normally be metal or steel on the actual Remington M700 are also made out of Metal with the Airsoft version. The stock is also Fiber reinforced like the real stele version.

View fullsize

Pros:

• Gas-operated bolt is far easier to cycle than a traditional spring-powered bolt rifle.

• Heavy use of metal parts throughout.

• Excellent balance and solid overall feel.

• Take-down design makes it easy to transport and store.

• Fiber-reinforced stock adds durability.

• Metal sling and bipod mounts for customization.

• Full-size drop-out metal magazine holds both gas and BBs.

• Easy-to-adjust hop-up screw.

• Ideal FPS for long-range shots without being overpowered.

• Consistent accuracy, good 30-foot performance should translate well to longer distances.

View fullsize

Cons:

• No sights or optics included, you’ll need to add your own.

• Occasional magazine feeding issues, especially when fully loaded.

• Slightly higher price compared to most spring-powered bolt-action Airsoft rifles.

View fullsize

Comments:
I’ve tested a few spring bolt-action Airsoft rifles before, and while those are simple (just load BBs and shoot), the gas-powered M700 offers a much smoother and faster bolt operation, perfect for quick follow-up shots. When seconds matter and targets are closing in, that speed can make a real difference.

The KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a great ready-to-shoot platform out of the box and can be easily upgraded with a sling, bipod, and of course, a scope, since it comes without sights.

My review unit had a minor magazine issue, but I believe this was specific to the sample I received and not a widespread problem. Overall, it’s a very capable and well-built Airsoft sniper rifle that delivers solid power, realism, and usability.

• Buy the G&G RK Beta AK AEG Airsoft Rifle in Canada

• Buy the AK AEG Airsoft Rifles in the US