The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol takes the already popular P320 platform and adds a more tactical, competition-inspired look with the Spectre Comp styling. In this Field Test Review, I focused mainly on real-world shooting performance including velocity, accuracy, trigger feel, blowback action, and overall handling. If you want all the detailed specifications and close-up overview footage, make sure to also check out my Table Top Review video for this model.
For this test I used standard Sig Sauer lead pellets, estimated around 7–8 grains rather than lightweight alloy pellets, giving a more realistic idea of what shooters can expect during normal use. Despite some chronograph frustrations during testing, the pistol delivered fairly consistent velocities once everything settled down. Average readings for my five shots through the Chronograph came in at 270 FPS, with highs reaching about 286 FPS during the initial shots and my slowest shot was 260 FPS. Considering the cooling effect common with CO2-powered airguns, the consistency was actually quite respectable for a blowback pellet pistol.
Accuracy testing was performed at 30 feet using a standard paper target. I fired a full 10-shot group and overall results were solid for a blowback pellet pistol with a higher-capacity belt-fed magazine system. Most shots grouped within roughly 2 inches, although the full spread opened up closer to 2.5–3 inches when including a couple lower shots likely caused by slight velocity variation from CO2 cooldown. Horizontal consistency was very good, with only a slight tendency to drift left. For a rapid-fire capable CO2 pistol with blowback, the accuracy was more than acceptable.
One thing worth mentioning is the trigger feelof the Sig Sauer Spectre Comp. Since the trigger system also advances the pellet belt during firing, there is naturally a bit more friction and a slightly longer pull compared to some rotary magazine designs. Even so, the trigger never felt excessively heavy or unpleasant. Rapid follow-up shots were still easy to manage, and the realistic blowback action adds a lot to the shooting experience.
The 20-round belt-fed magazine system is one of the biggest advantages of the Spectre Comp over many traditional rotary magazine pellet pistols. Instead of dealing with smaller 8-shot or flip-around style magazines, you get a much more enjoyable shooting session with fewer reload interruptions. Combined with the realistic weight, solid balance, and satisfying blowback recoil impulse, this pistol ends up being a very fun and practical option for target shooting and action-style plinking.
If you are looking for a realistic training-style pellet pistol that combines blowback action, higher magazine capacity, and solid handling characteristics, the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol is definitely worth checking out. It offers a nice balance between realism and shooting fun while still delivering respectable accuracy and consistency for casual target shooting.
You can find more information about Airguns, BB guns, Pellet guns, Airsoft guns, Blank guns, and accessories over at Replica Airguns Canada and Replica Airguns US.
In this table top review, taking a detailed look at the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol, a modern, competition-style airgun replica that closely mirrors its real steel counterpart. This model stands out with its aggressive styling, compensated muzzle, and optics-ready slide, making it one of the more premium-looking pellet pistols currently available.
This is a pellet-only airgun with blowback action, designed more for realism and handling than raw velocity. If already familiar with the Sig Sauer M17 pellet pistol, this one shares a lot of mechanical similarities, including the magazine system.
Specifications
Caliber: .177 Pellet
Action: Semi-auto, blowback
Magazine: 20-round belt-fed rotary system
Power Source: 12g CO2 (tool-free cam lever system)
FPS: Claimed 340 FPS
Weight: ~2.3 lbs
Overall Length: 8.5 inches
Barrel Length: 4.6 inches (rifled)
Construction: Metal slide, polymer frame
Sights: Fixed white dot front and rear
Optics Ready: Yes (SIG Air RMR compatible)
Rail: Picatinny accessory rail
Safety: Ambidextrous manual safety
Build Quality & Design
The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol delivers a solid mix of metal and polymer construction. The metal slide gives it realistic weight and feel, while the polymer frame helps keep things balanced. At around 2.3 pounds, it has a substantial presence in hand without feeling overly heavy.
The grip features enhanced texturing along with a flared magwell, adding to both aesthetics and usability. The slide includes light porting and is optics-ready, allowing for easy installation of a SIG Air RMR red dot.
One standout visual element is the compensated muzzle, which adds to the competition-style look. However, it also impacts field stripping, you’ll need to remove it to fully disassemble the slide.
Magazine & CO2 System
This pistol uses a 20-round belt-fed rotary magazine, which is housed within a drop-out mag body. Loading is straightforward:
Remove the rotary belt insert
Load pellets into each chamber
Reinsert into the mag
CO2 is loaded using a tool-free cam lever system, which is fast and convenient compared to traditional screw-in designs.
Important note: the magazine needs to be firmly seated. A light insertion may not lock it properly, and due to the weight, it could fall out if not fully engaged.
Also worth noting, while the outer mag housing has some polymer components, the internal structure is mostly metal. Still, avoid dropping it on hard surfaces.
Handling & Controls
Ambidextrous safety works from both sides, though visual indicators are only clearly marked on one side
Trigger feels closer to double-action due to the rotary magazine indexing
Slide cycles with blowback but does not lock back when empty
Takedown lever is present, but full disassembly is limited by the compensator
The trigger has a solid feel and requires deliberate pull due to the indexing mechanism. This is normal for belt-fed pellet systems.
Sights & Optics
The pistol comes with fixed white dot sights, which are effective for quick target acquisition. However, they are not adjustable.
For those wanting more precision, the pistol supports SIG Air RMR optics, replacing the rear sight with an included plate.
Performance Expectations
The claimed velocity is 340 FPS, which is typical for blowback pellet pistols. Expect slightly lower speeds with lead pellets (recommended) compared to alloy pellets.
Blowback operation will also consume more CO2 than non-blowback models, trading efficiency for realism.
If looking for a performance reference, similar results can be expected to the Sig Sauer M17 pellet pistol due to shared internals.
Pros
Excellent replica accuracy of the P320 Spectre Comp
Realistic blowback with metal slide
Good weight and balance (~2.3 lbs)
20-round high-capacity pellet magazine
Tool-free CO2 cam lever system
Rifled barrel optimized for pellet shooting
Optics-ready (SIG Air RMR compatible)
Flared magwell and enhanced grip texture
Picatinny rail for accessories
Magazine compatibility with M17
Cons
Lower FPS compared to non-blowback pellet pistols
Higher CO2 consumption due to blowback
Fixed (non-adjustable) sights
Pellet-only (no BB capability, though this protects rifling)
Slide does not lock back when empty
Field stripping requires compensator removal
Final Thoughts
The Sig Sauer P320 Spectre Comp pellet pistol is a strong option for anyone prioritizing realism, handling, and modern styling over raw power. It delivers a premium look with solid functionality, especially for training, backyard shooting, or collectors wanting a high-end replica.
While not the most powerful pellet pistol available, it excels in design, usability, and realism, especially if already a fan of the P320 platform.
For those in Canada, availability may already be live, with US availability likely to follow.
A surprise “tiny box” delivery turned out to be a solid addition to the lineup, the SIG Sauer P320 Spectre Comp Pellet Pistol. Despite the small packaging, this is a full-featured CO2-powered pellet pistol with a strong focus on realism and competition-style design.
Right out of the box, the Spectre Comp feels substantial, coming in at around 2.29 lbs with a metal slide and polymer frame. It features a semi-auto blowback action and uses a 20-round belt-style pellet magazine, typical of SIG’s higher-capacity pellet systems.
The pistol leans toward a competition-style setup, featuring a skeletonized trigger, ported slide, and a compensated front end for aesthetics. While the slide does not lock back (common for belt-fed pellet systems), the blowback adds to the overall shooting realism.
Loading is straightforward thanks to the tool-free CO2 system and two-piece magazine design. The trigger pull feels more like a double-action due to the belt cycling, which is typical for this platform.
Overall, the P320 Spectre Comp CO2 Blowback Pellet Pistol looks to be a well-built, feature-rich option for those wanting a realistic training pistol with added competition styling. A full tabletop review and field test shooting results will follow once it’s put through proper testing.
In this table top review, we take a close look at the Steambow B08 .68 Caliber Tactical Crossbow, a compact and versatile system designed for shooting rubber balls, paintballs, or foam projectiles. This model is particularly suited for controlled environments like indoor ranges (such as a sea can setup or even basement or backyard), thanks to its relatively moderate power and flexible ammunition options.
A full shooting test will follow separately, but for now, let’s break down the specifications, features, and what comes in the box.
Energy: Approx. 7 ft-lbs (up to ~15 ft-lbs with stronger limbs)
Magazine Capacity: 8 rounds (removable)
Weight: Just under 4 lbs
Length: 24.2 inches
Width: 3.15 inches (body, excluding limb span)
Height: 8.3 inches
Materials: Fiberglass, metal, and polymer construction
Stock: AR-style adjustable (6-position) with cheek rest and rubber butt pad
The B08 is distributed by Steambow GmbH (Austria) and is built on a modular platform compatible with other Steambow systems like the M10.
Key Features
Modular Platform
One of the standout aspects of the B08 is its modular design. The lower receiver is identical to the Steambow M10, meaning you can swap uppers to shoot either:
.68 caliber balls (B08 upper)
Crossbow bolts (M10 upper)
This gives users flexibility to adapt the platform for different uses.
Quick Change Limb System
The included 35 lb limb is easy to swap out:
Secured by a single bolt
Can be upgraded up to heavier options (up to ~120 lbs available)
Allows tuning for power vs. ease of cocking
Magazine-Fed Repeater System
8-round removable magazine
Spring-fed system with follower
Auto-loading mechanism (not semi-auto, but fast cycling)
The system works by “breaking” or pulling back the stock, which:
Cocks the string
Loads the next round
Prepares the trigger
Cocking Mechanism
Shoulder-supported operation
Pull stock inward to cock
Very easy with 35 lb limb
Allows relatively fast follow-up shots once familiar
Sighting System
Fiber optic front sight
Rear alignment via top trough channel
While simple, it works well for close-range shooting. However, the included Picatinny rails (top and bottom) allow for:
The B08 comes well-packaged with multiple internal boxes and includes:
Steambow B08 main unit
35 lb limb
Foregrip
8-round magazine
25 “foam” balls (closer to hard nylon in feel)
Protective shooting glasses
Allen keys (for assembly and adjustments)
String wax
Extra string
Mounting hardware
Instruction manual
Note: A small locking component for the upper assembly may come separate and is not clearly explained in the manual, but is required for proper function.
Operation Overview
Load magazine with up to 8 rounds
Insert magazine into front housing
Cock by pulling stock inward
Fire using single-action trigger
The ball is held in place by a simple groove and string system, guiding it forward during firing.
Performance Notes (Initial Impressions)
Smooth and reliable operation
Easy to cock with 35 lb limb
Suitable for indoor shooting environments
Compatible with various projectile types
Heavier limbs will:
Increase velocity and energy
Require more effort to cock
Pros
Lightweight and compact (under 4 lbs)
Modular system (compatible with M10 platform)
Magazine-fed repeater design
Easy cocking with included limb
Quick-change limb system
Picatinny rails for accessories
Comes with useful extras
Quiet operation
Reusable ammunition options
Cons
Higher price point
No traditional rear sight included
Learning curve for efficient operation
Included limb may feel underpowered for some users
Final Thoughts
The Steambow B08 offers a unique blend of crossbow mechanics and tactical styling, combined with modular flexibility and relatively safe indoor usability. It’s especially appealing for users who want:
A reusable ammo platform
Quick follow-up shots
Expandability with other Steambow systems
While the included 35 lb limb keeps it easy to use and accessible, upgrading the limb will unlock more performance potential for those looking for higher energy output.
In this Video I perform the field test shooting review for the SIG Sauer P229 pellet pistol. If you’re interested in the full specifications, features, and a closer look at the pistol itself, make sure to check out my tabletop review where I go over all the details on this gun.
For today’s test I’m going to be shooting SIG Sauer lead pellets, roughly 7–8 grains. Because these are standard lead pellets and not lightweight alloy pellets, they’re not going to produce the highest velocity numbers this pistol can achieve. With lighter alloy pellets you will definitely see faster readings.
You could also shoot steel BBs through this gun, but BBs sometimes don’t seal quite as tightly in the barrel as pellets do. When that happens, some of the CO₂ can slip around the BB as it travels down the barrel which can actually reduce velocity slightly. BBs also generally don’t carry energy to the target as well as pellets, so pellets are usually the better option for accuracy and performance.
With these pellets, I’m expecting roughly around the 300 FPS range, so let’s see how it actually performs.
Velocity Test
For the velocity portion I’m going to put five shots through the chronograph to see what kind of numbers we get.
As you can see, the readings are right about where expected, generally around the 300 FPS mark, with a slight drop toward the last shot. That’s fairly typical for CO₂ powered blowback pistols, since some of the gas is being used to cycle the slide.
Accuracy Test:
For the accuracy portion I’ve set up my paper targets at 30 feet downrange.
The SIG Sauer P229 pellet pistoluses a dual rotary 8-round magazine, so instead of the usual 10 shots I normally use in these tests, I’m going to fire eight shots to keep things simple and consistent.
One thing I like about this pistol is the trigger operation. When you start the trigger pull, the first stage rotates the rotary magazine. This part of the pull is very light and smooth, so there’s very little double-action feel. Once that’s done, you reach the single-action hammer release, which is nice and predictable.
To keep the trigger as light as possible I’m going to pre-cock the hammer, which eliminates most of that initial rotation effort and gives you a much lighter break.
Accuracy Results:
After eight shots at 30 feet, the group measured approximately 1.5 inches.
That’s actually pretty good accuracy for a blowback pellet pistol.
The pistol was shooting slightly low out of the box, roughly about two inches low and just a little to the left at this distance. My aim point was just underneath the bullseye so I could see the target above the sights.
The sights on this pistol are fixed, so you can’t adjust them directly. The easiest solution is simply to aim slightly higher and a bit to the right if you want to hit the bullseye consistently at this range.
Sight Upgrade Options:
If you want more precise adjustment, you do have a couple of options:
Install a slide-mounted red dot using the removable optics plate
Add a laser to the accessory rail under the barrel
Either of those options would allow you to dial in your point of aim exactly where you want it, which is a nice upgrade path for this pistol.
Shooting Impression
The trigger feels really good, and the blowback action is solid and snappy, though not overly fast.
The slide actually has a bit of that heavier, slightly slower 1911-style blowback feel, which I personally like. Some blowback pistols cycle extremely quickly and can feel a bit artificial, but this one feels more substantial because of the heavier slide weight.
The pistol itself also has good weight and balance, coming in a bit over two pounds, giving it a very realistic feel in the hand.
Overall, it’s a solid, well-built pellet pistol, and like many of the SIG Sauer Airgun products, it feels like a lot of attention went into the design.
SIG doesn’t actually manufacture these Airguns themselves, they design them and partner with manufacturers to produce them, but the quality across their pellet pistols and rifles has generally been very good.
Overall, it’s a very enjoyable pistol to shoot and a solid option if you’re looking for a realistic blowback pellet pistol.
Don’t forget to subscribe, and check us out on Facebook, Twitter, and Instagram.
If you’re interested in buying Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and Accessories, be sure to visit our online Canada and US Stores.
Available in our Canada Replica Airguns Store. Also check out:
In this Table Top Review we’re taking a close look at the Sig Sauer P229 CO2 Blowback Pellet Pistol. This is the tabletop portion only, no shooting in this review as my Field Test Shooting Video will follow later on.
If you’re familiar with the Sig Sauer ASP P226 platform, the P229 version is the same general system in a more compact package, with one major upgrade: it’s optics-ready!
Magazine: 16 rounds (twin 8-shot rotary clips, loaded on both ends)
Barrel: Rifled inner barrel
Sights: White dot sights
Safety: Manual safety lever with de-cocker function
Claimed Velocity: up to ~380 fps (real-world varies with temperature and cadence)
Shots per CO2: roughly 50–60 (varies with temperature/cadence)
Weight: 35.2 oz / 1.0 kg (2.2 lb)
Overall Length: 7.7 in (P229)
Optics: optics-ready slide / SIG AIR reflex-sight mounting provision
Muzzle threads: M14x1 CCW
In the Box
P229 CO2 blowback pellet pistol
Manual
Sight/plate parts for the SIG AIR reflex mounting setup (for red dot use)
P226 vs P229 - What’s Different?
These two share the same general operating system (CO2 blowback, DA/SA, rotary-mag that works with pellets/BBs), but the P229 version changes a few important things:
Key Differences
Size: P229 is shorter (7.7 in) vs P226 (8.25 in).
Weight: P229 is lighter (35.2 oz / 2.2 lb) vs P226 (~39.1 oz).
Optics: P229 is optics-ready (SIG AIR reflex mounting provision); P226 platform is typically not.
Muzzle threads: P229 uses M14x1 CCW (P226 commonly uses a different thread direction/size).
Bottom line: if you liked how the P226 handled and performed, the P229 should feel very familiar, just more compact, with the bonus of being set up for a dot.
Walk-Around & Handling
The P229 has that classic SIG profile and a very “real pistol” feel in the hand, helped by the mostly-metal build and full weight.
Notable features and controls:
DA/SA trigger system: long/heavier first pull in double-action, then lighter single-action after the slide cycles.
Safety + de-cocker lever: functions like the real-steel concept — you can decock the hammer and run it DA/SA.
Accessory rail: for a light/laser (training-style setup).
Optics-ready slide: set up to accept the SIG AIR reflex-style mounting system (sight sold separately).
CO2 System and Magazine Notes
One of the standout features on this platform is SIG’s cam-lever, tool-less CO2 loading system, designed to make cartridge swaps quick and easy.
The magazine is a 16-shot design using twin 8-shot rotary clips. Practical tip: make sure pellets are seated properly in the rotary clip so they don’t hang up during cycling.
Pros
Mostly metal build with realistic weight and solid feel
Compact P229 size (shorter than the P226)
DA/SA trigger + functional safety/de-cocker system
Blowback action for realism/training value
Rifled inner barrel (pellet accuracy potential)
Tool-less cam-lever CO2 loading system
Optics-ready slide (big upgrade over older-style setups)
Accessory rail for light/laser
Cons
Fixed/non-adjustable sights
CO2 performance is temperature + cadence sensitive (rapid fire cools the system and drops power)
No last-round hold-open on this style of rotary-mag system
Rotary clips require good pellet seating to avoid occasional feeding issues
Final Thoughts
The Sig Sauer P229 blowback pellet pistol is a very “SIG-like” training/plinking platform: realistic controls, DA/SA operation, snappy blowback, and a compact duty-pistol footprint. The biggest tabletop takeaway is the optics-ready slide, which makes this version feel more modern than older CO2 pellet pistol designs.
Field test shooting (chronograph + accuracy) will follow in the next video.
Available in our Canada Replica Airguns Store. Also check out:
It’s been a little while since I’ve done an unboxing, so we’ll call this the February 2026 Mystery Box Unboxing Video.
First up: SHOT Show is officially wrapped on my end, interviews, teaser, the whole run. There should be a playlist available so you can binge everything in one place. Now that the heavy editing grind is done, I’m getting back into regular reviews, unboxings, tabletop breakdowns, and full field tests.
Also: we’re back on YouTube and I’m uploading like crazy. I’m moving the library over from Vimeo one-by-one (lots of clicks, lots of time). We’ve got roughly 1,300 videos total, and I’m already around 500 videos in, so if you’re hunting for something specific, use playlists and search because new uploads can get buried fast. If you can, subscribe and share the channelwith other Airgun enthusiasts so we can build momentum again.
I initially called it a P226, but it’s the P229 (compact). This is a pellet version (not BB), with:
16-round rotary stick magazine (8 per side)
Blowback, semi-auto
Claimed 380 FPS
3.9" barrel, 7.7" overall length
2.2 lb, hefty all-metal feel (mag is plastic)
No slide lock-back due to the rotary setup, but it looks great in-hand. Tabletop and field test videos are coming, and I’ll run it on typical lead pellets to see real-world performance.
This is the TC68 trainer that shoots .68 caliber rounds (rubber, powder, paint, pepper ball options depending on what you choose). Specs and highlights:
Claimed 330 FPS and 16 joules
20-round magazine-fed setup
Supports dual 12g CO2, 88g CO2, and HPA options
Includes multiple configurations (stocks/adapters) plus a hopper-fed option
I’ll confirm operating modes, setup options, and performance in the upcoming tabletop and field tests.
I stopped by the Blue Line booth and Connor showed me a line of peppered gel deterrent products they’re hoping to bring into Canada as dog-spray style options (with stronger versions available in the U.S., depending on regulations).
The key difference vs typical pepper spray: these use a jet/propulsion system that fires a more directed stream, designed to reduce blowback and improve placement.
JPX2 Gen 2 (2-shot)
Takes a 2-shot cartridge; each trigger pull fires one shot.
The cartridge is replaceable after use (Connor emphasized it’s essentially disposable once fired).
Connor said range is about 20 ft; manufacturer specs cite roughly 5–23 ft depending on conditions.
4-shot option (JPX4-style)
Connor also showed a 4-shot version aimed at law enforcement markets, but they’re hoping it can be available more broadly as well.
Guardian Angel 4 (compact 2-shot)
A small two-shot, pocketable option with a simple safety and clip—intended as a quick, lightweight grab-and-go device.
Connor also mentioned optional laser sight accessories for better aiming, and that all versions are around the same practical range envelope.
If these can be brought in cleanly for Canada, they look like a good fit for a store + review pipeline: JPX2 Gen 2 for the main feature set, JPX4 for the multi-shot crowd, and Guardian Angel 4 for people who want something ultra-compact and simple.
I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.
Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.
Capacity: 400-round main reservoir + 25-round ready magazine
Action: Full auto
Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.
Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.
Feed system: 8-round magazine + 120-round reservoir built into the mag
Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.
Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.
Capacity: 400 BBs
How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines
Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.
Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.
Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box
Caliber: .25 only
Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)
Positioning: Built for small game / pest work and “preparedness” minded buyers
Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.
S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.
We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.
New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.
Caliber shown: .22
Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.
Frame/version: brass frame first, with other versions planned.
Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.
Early price talk: roughly $400–$500 range (with cartridges), but still TBD.
1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).
Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.
Calibers: .22 is the focus (with .177 also planned/available).
New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.
Uses flat bands (easy to swap/upgrade for strength/velocity).
Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.
Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.
Sights/optics: adjustable iron sights plus Picatinny rail for optics.
Calibers mentioned/planned: .177 / .22 / .25.
New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:
Rotary magazine (prototype shown in .30 cal, 8 rounds)
Power testing target: up to ~80 ft-lb in .30 cal
Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.
Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.
Features: adjustable cheek rest, M-LOK fore-end
Timing: Q2 target for the 270Z; Q3 target for the 300Z.
Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.
We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.
New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.
GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.
Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.
Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.
Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.
I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.
The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.
But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!
I was in Las Vegas last week for SHOT Show, filming content for Replica Airguns, but I wanted to post a quick update so you know what I was up to.
I went to SHOT Show to connect with people in the industry and record a bunch of interviews with vendors and companies, Airgun and aintball brands included (and more). I ended up filming about seven interviews, and now that I’m home I’ve got a lot of great footage to go through.
I was in Vegas with my buddy Steve (the guy behind the camera). Once the filming was wrapped, we spent some time enjoying the city after a busy week. We also did a few things outside of SHOT Show, because if you’re in Vegas, you might as well experience it.
In this video, we’re at the Montecristo Cigar Bar inside Caesars Palace, winding down with a nice port and a cigar.
Stay tuned,now that I’m back, I’ll start editing and posting those interviews. If you want to watch the SHOT Show interview series, head over to Replica Airguns or watch on our Vimeo and YouTube channels as I post them…
I also got a few accessor items from a company called GEAR STOCK, Some CO2 in 12 and 88 gram along with some 6mm aluminum Airsoft BB’s. A very cool rechargeable red and green laser that comes in a nice hard shell case and it has a picatinny rail on the bottom she you can stack a second accessory under it.
Here are some links and specs for the Airguns I show off in this mystery box video:
In this part two video of our three part video series covering all the different ammo and barrel types that can be used with the Alias GEM Multi Ammo Mini CO2 Airgun, I test out the .50 caliber Paintball (Rubber Ball) barrel and ammo option to see what velocity and accrual I can get from the Alias Gem CO2 Airgun. If you have too already watch my Table Top Video and or my BB and Airsoft Field Test Shooting Video, then make sure to do so when you get a chance. Right off the bat I want to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not at all an Airgun you are going to want to buy in terms of raw performance as you will see in this video and my other Field Test Videos for it in this series. It is however a very unique Airgun you can shoot up close with and have some fun shooting whatever ammo you decide to go with on that given day.
Starting with velocity, I should have put a brand new CO2 in the Airgun as I end up finding out only getting three good shots out of my remain CO2, because of the super short barrel and rather inefficient use of the CO2, you only get around 12-15 full use shots out of the Alias GEM Multi Ammo Mini CO2 Airgun and that is with the larger 12 gram CO2! For that reason I only based my average velocity through my Chronograph on the first three shots I took, which were all pretty close in velocity. Here are the results: 200, 207, 203 with an average of 203 fps using fairly light weight .50 Caliber Rubber Balls. Again the super short barrel does not do this Airgun any favors in the power department.
Moving onto the accuracy portion of this test, well you really don’t need to watch this part as I was not able to hit my 8x11 target setup 30 feet away. Part of the problem is that there are no sights on the .50 Caliber Paintball Barrel and the other factor is that the Alias GEM Multi Ammo Mini CO2 Airgun kind of throws rounds all over the place no matter what ammo or barrel type you choose, so trying to figure out exactly where to aim is kind of hard and so I may have simply not been aiming in the best location on the target to get best results. In hind sight I probably should have just shot this Airgun a lot closer than I do when making my standard Field Test Shooting Videos, but this is my standard shooting location and so I stuck with it.
After I make my videos, I sometimes see things I did not notice when I was making them, and in this case I can see that the .50 caliber Paintball Rubber Rounds I was using did not always go as deep in the barrel as you need to front load them and kind of tap them and let gravity help ease them in. I should have perhaps used a pencil or something like it to push the Rubber Balls all the way in for more consistent performance in terms of velocity and accuracy. Well now we all know! You are not going to be using this Paintball Airgun for any kind of Paintball war games and so in my opinion I would go with the included 6mm Airsoft BB’s for shooting in areas where a 4.5mm metal BB may not be good idea. The 6mm Plastic Airsoft BB’s seemed to have the highest velocity averaging 383 fps with .25 gram Airsoft BB’s and I was able to get some of them on the paper target at 30 feet away.
This Field Test Shooting Video for the Alias GEM Multi Ammo Mini CO2 Airgun is part one of three videos where I will be testing out the included 4.5mm Steel BB Barrel and 6mm Airsoft Barrel options that come with it in the box. I also have the .50 Caliber Paintball and rocket Barrels that I will be testing in Field test Videos two and three consecutive to this video. Normally I first test velocity and then I test accuracy, but in this three part video series I test velocity and accuracy at the same time being that the Alias GEM Multi Ammo Mini CO2 Airgun is a single shot pistol. I get the same end testing results as I would normally get, but I do only shoot 5 rounds at the target, spoiler alert the Alias GEM Multi Ammo Mini CO2 Airgun is not all that accurate, so I am not sure if adding another 5 more shots would have shown us a different result.
In terms of velocity, keep in mind the barrel is super short on the Alias GEM Multi Ammo Mini CO2 Airgun at just over 3 inches when using the 4.5mm Steel BB, the 6mm Airsoft, and the .50 caliber Paintball Barrels. That said with 4.5mm Steel BB’s I did average 263 fps and with 6mm .25 gram Plastic Airsoft BB’s, I averaged 383 fps which was actually pretty good. The temperature was mid warm so pretty close to room temperature when I performed my test.
Accuracy was not nearly as good as I was hoping for, I was not expecting stellar results and I would say I got even less than stellar results only getting 3 of the 4.5mm Steel BB’s on the paper target and only 2 of the 6mm Airsoft BB’s on the target. I did struggle with exactly where I needed to aim the Alias GEM Multi Ammo Mini CO2 Airgun as BB’s were so inconsistent. Perhaps if I was able to figure out the ideal aim point, I would have had more BB’s land on the target. Even the sights are hard to use with such a small Airgun having a super short barrel. If you are hoping the .50 caliber Paintball rounds and Rockets (Bolts) do better, don’t count on it…
All in all Alias GEM Multi Ammo Mini CO2 Airgun is a super cool and unique Airgun that has a lot of options when it comes to ammo choice. I would not recommend using it at anywhere close to 30 feet away as I did in this test, this is how my Airgun range is setup. It would be a lot better at 20 feet or even 10 feet since it is not a lot of fun if when you shoot at something, you don’t really ever hit it ;) Stay posted for my upcoming Field Test Shooting Videos for the .50 Caliber Paintballs and the Rockets (Bolts). I have also made a Table Top video you can check out if you are interested in more of the details and specifications along with some nice close up video of the Alias GEM Multi Ammo Mini CO2 Airgun.
I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.
I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.
It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!
I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!
I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…
