View fullsize

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol takes the already popular P320 platform and adds a more tactical, competition-inspired look with the Spectre Comp styling. In this Field Test Review, I focused mainly on real-world shooting performance including velocity, accuracy, trigger feel, blowback action, and overall handling. If you want all the detailed specifications and close-up overview footage, make sure to also check out my Table Top Review video for this model.

For this test I used standard Sig Sauer lead pellets, estimated around 7–8 grains rather than lightweight alloy pellets, giving a more realistic idea of what shooters can expect during normal use. Despite some chronograph frustrations during testing, the pistol delivered fairly consistent velocities once everything settled down. Average readings for my five shots through the Chronograph came in at 270 FPS, with highs reaching about 286 FPS during the initial shots and my slowest shot was 260 FPS. Considering the cooling effect common with CO2-powered airguns, the consistency was actually quite respectable for a blowback pellet pistol.

Accuracy testing was performed at 30 feet using a standard paper target. I fired a full 10-shot group and overall results were solid for a blowback pellet pistol with a higher-capacity belt-fed magazine system. Most shots grouped within roughly 2 inches, although the full spread opened up closer to 2.5–3 inches when including a couple lower shots likely caused by slight velocity variation from CO2 cooldown. Horizontal consistency was very good, with only a slight tendency to drift left. For a rapid-fire capable CO2 pistol with blowback, the accuracy was more than acceptable.

View fullsize

One thing worth mentioning is the trigger feelof the Sig Sauer Spectre Comp. Since the trigger system also advances the pellet belt during firing, there is naturally a bit more friction and a slightly longer pull compared to some rotary magazine designs. Even so, the trigger never felt excessively heavy or unpleasant. Rapid follow-up shots were still easy to manage, and the realistic blowback action adds a lot to the shooting experience.

The 20-round belt-fed magazine system is one of the biggest advantages of the Spectre Comp over many traditional rotary magazine pellet pistols. Instead of dealing with smaller 8-shot or flip-around style magazines, you get a much more enjoyable shooting session with fewer reload interruptions. Combined with the realistic weight, solid balance, and satisfying blowback recoil impulse, this pistol ends up being a very fun and practical option for target shooting and action-style plinking.

If you are looking for a realistic training-style pellet pistol that combines blowback action, higher magazine capacity, and solid handling characteristics, the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol is definitely worth checking out. It offers a nice balance between realism and shooting fun while still delivering respectable accuracy and consistency for casual target shooting.

You can find more information about Airguns, BB guns, Pellet guns, Airsoft guns, Blank guns, and accessories over at Replica Airguns Canada and Replica Airguns US.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer P320 Blowback Pellet Pistol in the US

Despite a rocky start, my test with the Specna Arms SA-F249 machine gun did yield some eventual results. Initially, I set up multiple cameras (Three Sony Cameras, Insta360 X4, DJI Neo 2, Looki L1, Meta Ray-ban Gen 2) and planned a full-auto session aiming to empty the 1500-round magazine on a boat load of water filled cans. Unfortunately, the magazine’s feed malfunctioned, preventing the gun from firing as intended. Even so, I pivoted, swapping in an AR-15 magazine and still managed to get some satisfying shots on target. at the end of the video

It’s all part of the process: sometimes you get a lemon, but that doesn’t mean the day is totally lost. We did confirm that the gun itself works very well, and I hope to be revisiting this test with a new 1500 round magazine to give it a proper go. For now, at least we got a bit of action on those water-filled cans. Stay tuned for a follow-up, because I’m determined to show this LMG at its full potential!

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

View fullsize

The support weapon role in airsoft has always had a certain appeal, and the Specna Arms SA-F249 definitely delivers that intimidating LMG presence right out of the box. This massive AEG support rifle is styled after the legendary FN M249 platform and brings together high-capacity firepower, aggressive looks, and surprisingly good value for players wanting something beyond the typical AR-style airsoft rifle.

At first glance, the SA-F249 looks huge, but despite its size, it’s actually lighter than expected thanks to its reinforced polymer construction. Even so, it still feels substantial in the hands and gives off that true support weapon vibe the moment you shoulder it.

The version reviewed here comes equipped with the GATE X-ASR MOSFET system, a 1500-round auto-feeding electric box magazine, quick spring change capability, adjustable stock, integrated bipod, and multiple Picatinny rail sections for optics and accessories.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: SA-F249 Machine Gun AEG

• Platform Style: FN M249 Inspired Support Weapon

• Caliber: 6mm Airsoft BB

• Action: Electric Automatic (AEG)

• Magazine Capacity: 1500 Round Auto-Feeding Box Magazine

• FPS: Approximately 390 FPS

• Weight: 9.15 lbs / 4150g

• Length: 32–37 inches Adjustable

• Inner Barrel Length: 340mm

• Hop-Up: Adjustable Rotary Hop-Up

• Gearbox: Version 2 Gearbox

• MOSFET: GATE X-ASR Installed

• Threading: 14mm Counter-Clockwise

• Construction: Reinforced Polymer and Metal

• Battery Connector: Deans (Comes with adaptor)

• Battery & Charger: Not Included

View fullsize

First Impressions

One of the first things noticed during the review was how different some components appeared compared to other online reviews. Some reviewers mentioned metal rear stock components while others claimed certain barrel sections were plastic. On this specific version, the rear stock assembly was definitely polymer, while the outer barrel appeared to be metal.

This kind of variation is fairly common with airsoft manufacturers over time as revisions and production updates happen.

Even with the extensive use of polymer, the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle still looks impressive and feels well-balanced considering its overall size. The carry handle, outer barrel, and several internal components are metal, while much of the receiver, stock, and furniture use reinforced polymer to help reduce overall weight.

View fullsize

Electric Auto-Feeding Box Magazine

The standout feature on the SA-F249 is definitely the included 1500-round electric auto-feeding box magazine. This is what transforms the rifle into a true support platform capable of sustained suppressive fire during milsim games or outdoor skirmishes.

The magazine runs on AA batteries and includes three operating modes:

• Off

• Auto

• Sound Control

The “Auto” mode activates the winding mechanism whenever the trigger is pulled, while the “Sound Control” mode intelligently detects pitch changes from the gearbox to determine when BBs stop feeding, automatically rewinding the internal spring system as needed. It’s actually a pretty clever setup and adds a lot to the realism and usability of the rifle.

Another nice touch is that the SA-F249 remains compatible with standard M4-style AEG magazines, allowing emergency reloads if needed.

View fullsize

Build Quality and Construction

The reinforced polymer construction helps keep the SA-F249 from becoming excessively heavy, especially for extended gameplay sessions. While some players may prefer more metal components for realism, there are advantages to quality polymer construction as well.

Polymer can sometimes absorb impacts better than brittle zinc alloy “pot metal” components commonly found in lower-end airsoft guns. The lighter weight may also reduce stress during accidental drops.

That said, there are still some concerns about long-term durability in specific areas, especially considering the rifle’s size and weight. I feel certain parts like the bipod and rear stock would have benefited from additional metal reinforcement.

View fullsize

Quick Spring Change System

The SA-F249 also includes a quick spring change system for easier FPS adjustments. Accessing the spring requires removing the rear stock assembly by pushing out the rear pins.

While the feature itself is excellent, the review sample had extremely tight rear pins that required minor drilling of the polymer mounting holes to improve fitment. Once removed, however, spring access was relatively straightforward.

Field Role and Gameplay Potential

The Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle is clearly designed for players wanting to fill a support gunner role. The large magazine capacity, full-auto-only operation, integrated bipod, and intimidating LMG profile make it ideal for suppressive fire and milsim gameplay.

At roughly $400 Canadian, the SA-F249 also offers surprisingly solid value considering what’s included. Many mid-range AR-style AEGs can already approach the $200–$300 range, making the jump to a dedicated support weapon platform more reasonable than some players might expect.

View fullsize

Pros

• Super cool!

• High-capacity 1500 round auto feeding system.

• GATE X-ASR™ MOSFET improves trigger response and protects electronics.

• Quick spring change system allows for somewhat easy FPS tuning.

• Durable reinforced polymer and metal construction.

• Adjustable stock helps stability and comfort.

• Multiple rail sections for optics and accessories.

• LMG styling and handling make it ideal for support roles and milsim use.

• Compatible with M4 style magazines.

• Integrated bipod and carry handle add realism and functionality.

• Strong overall value for a support weapon platform.

View fullsize

Cons

• Large and heavy compared to standard AR style AEGs.

• Box magazine can be bulky and somewhat noisy.

• Battery and charger sold separately.

• Lots of plastic, may experience durability issues.

• Rear stock pin fit may require drilling out.

View fullsize

Final Thoughts

The Specna Arms SA-F249 Machine Gun AEG is a very cool support weapon platform that delivers a strong mix of realism, functionality, and affordability. It may not be perfect, and some players will likely wish for more metal construction, but overall it offers excellent value for anyone wanting to step into the LMG support role without spending a fortune.

The 1500-round auto-feeding system alone will make this thing a blast to use, and combined with the MOSFET, quick spring change system, adjustable stock, and M4 magazine compatibility, the SA-F249 brings a lot to the table for milsim and support gun enthusiasts alike.

A full field test shooting review should be especially interesting with this one.

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

View fullsize

First Look & Overview

In this table top review, taking a detailed look at the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol, a modern, competition-style airgun replica that closely mirrors its real steel counterpart. This model stands out with its aggressive styling, compensated muzzle, and optics-ready slide, making it one of the more premium-looking pellet pistols currently available.

This is a pellet-only airgun with blowback action, designed more for realism and handling than raw velocity. If already familiar with the Sig Sauer M17 pellet pistol, this one shares a lot of mechanical similarities, including the magazine system.

Specifications

• Caliber: .177 Pellet

• Action: Semi-auto, blowback

• Magazine: 20-round belt-fed rotary system

• Power Source: 12g CO2 (tool-free cam lever system)

• FPS: Claimed 340 FPS

• Weight: ~2.3 lbs

• Overall Length: 8.5 inches

• Barrel Length: 4.6 inches (rifled)

• Construction: Metal slide, polymer frame

• Sights: Fixed white dot front and rear

• Optics Ready: Yes (SIG Air RMR compatible)

• Rail: Picatinny accessory rail

• Safety: Ambidextrous manual safety

View fullsize

Build Quality & Design

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol delivers a solid mix of metal and polymer construction. The metal slide gives it realistic weight and feel, while the polymer frame helps keep things balanced. At around 2.3 pounds, it has a substantial presence in hand without feeling overly heavy.

The grip features enhanced texturing along with a flared magwell, adding to both aesthetics and usability. The slide includes light porting and is optics-ready, allowing for easy installation of a SIG Air RMR red dot.

One standout visual element is the compensated muzzle, which adds to the competition-style look. However, it also impacts field stripping, you’ll need to remove it to fully disassemble the slide.

View fullsize

Magazine & CO2 System

This pistol uses a 20-round belt-fed rotary magazine, which is housed within a drop-out mag body. Loading is straightforward:

• Remove the rotary belt insert

• Load pellets into each chamber

• Reinsert into the mag

CO2 is loaded using a tool-free cam lever system, which is fast and convenient compared to traditional screw-in designs.

Important note: the magazine needs to be firmly seated. A light insertion may not lock it properly, and due to the weight, it could fall out if not fully engaged.

Also worth noting, while the outer mag housing has some polymer components, the internal structure is mostly metal. Still, avoid dropping it on hard surfaces.

View fullsize

Handling & Controls

• Ambidextrous safety works from both sides, though visual indicators are only clearly marked on one side

• Trigger feels closer to double-action due to the rotary magazine indexing

• Slide cycles with blowback but does not lock back when empty

• Takedown lever is present, but full disassembly is limited by the compensator

The trigger has a solid feel and requires deliberate pull due to the indexing mechanism. This is normal for belt-fed pellet systems.

View fullsize

Sights & Optics

The pistol comes with fixed white dot sights, which are effective for quick target acquisition. However, they are not adjustable.

For those wanting more precision, the pistol supports SIG Air RMR optics, replacing the rear sight with an included plate.

Performance Expectations

The claimed velocity is 340 FPS, which is typical for blowback pellet pistols. Expect slightly lower speeds with lead pellets (recommended) compared to alloy pellets.

Blowback operation will also consume more CO2 than non-blowback models, trading efficiency for realism.

If looking for a performance reference, similar results can be expected to the Sig Sauer M17 pellet pistol due to shared internals.

View fullsize

Pros

• Excellent replica accuracy of the P320 Spectre Comp

• Realistic blowback with metal slide

• Good weight and balance (~2.3 lbs)

• 20-round high-capacity pellet magazine

• Tool-free CO2 cam lever system

• Rifled barrel optimized for pellet shooting

• Optics-ready (SIG Air RMR compatible)

• Flared magwell and enhanced grip texture

• Picatinny rail for accessories

• Magazine compatibility with M17

Cons

• Lower FPS compared to non-blowback pellet pistols

• Higher CO2 consumption due to blowback

• Fixed (non-adjustable) sights

• Pellet-only (no BB capability, though this protects rifling)

• Slide does not lock back when empty

• Field stripping requires compensator removal

View fullsize

Final Thoughts

The Sig Sauer P320 Spectre Comp pellet pistol is a strong option for anyone prioritizing realism, handling, and modern styling over raw power. It delivers a premium look with solid functionality, especially for training, backyard shooting, or collectors wanting a high-end replica.

While not the most powerful pellet pistol available, it excels in design, usability, and realism, especially if already a fan of the P320 platform.

For those in Canada, availability may already be live, with US availability likely to follow.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

A surprise “tiny box” delivery turned out to be a solid addition to the lineup, the SIG Sauer P320 Spectre Comp Pellet Pistol. Despite the small packaging, this is a full-featured CO2-powered pellet pistol with a strong focus on realism and competition-style design.

Right out of the box, the Spectre Comp feels substantial, coming in at around 2.29 lbs with a metal slide and polymer frame. It features a semi-auto blowback action and uses a 20-round belt-style pellet magazine, typical of SIG’s higher-capacity pellet systems.

Key highlights include:

• CO2 powered (.177 caliber pellet)

• Blowback action (semi-auto)

• 20-round belt magazine

• Approx. 340 FPS velocity

• Optics-ready slide (RMR plate compatible)

• Ambidextrous safety and controls

• Flared magwell for faster reloads

• Picatinny accessory rail

• Field-strip capable design (with compensator removal)

View fullsize

The pistol leans toward a competition-style setup, featuring a skeletonized trigger, ported slide, and a compensated front end for aesthetics. While the slide does not lock back (common for belt-fed pellet systems), the blowback adds to the overall shooting realism.

Loading is straightforward thanks to the tool-free CO2 system and two-piece magazine design. The trigger pull feels more like a double-action due to the belt cycling, which is typical for this platform.

Overall, the P320 Spectre Comp CO2 Blowback Pellet Pistol looks to be a well-built, feature-rich option for those wanting a realistic training pistol with added competition styling. A full tabletop review and field test shooting results will follow once it’s put through proper testing.

• Buy the SIG Sauer P320 Spectre Comp Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

In this table top review, we’re taking a detailed look at the Specna Arms SA-F04 Flex AEG Airsoft Rifle. This is not a shooting test, field testing will come later, but this overview will cover specifications, build quality, features, and overall pros and cons so you can decide if it’s a good fit for your needs.

I can say that right out of the box, this rifle offers a strong balance between price, performance, and features, especially for players looking for a lightweight AR-style platform with modern internals.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: SA-F04 Flex

• Platform: AR / M4 Style

• Caliber: 6mm Airsoft BB

• Action: Semi / Full Auto

• Magazine Capacity: ~380 rounds (high-cap, spring-fed with winder)

• Velocity: ~380 FPS (M120 spring installed)

• Weight: ~4.7 lbs (≈2.1 kg)

• Length: ~27–30 inches (adjustable stock)

• Inner Barrel: ~6.03mm tight bore

• Outer Barrel Length: 9 inches

• Threading: 14mm CCW

• Gearbox: Version 2

• Hop-Up: Rotary style (TDC Magnus)

• MOSFET / ETU: Yes (HAL system)

• Spring System: ESA Quick Change

• Battery Recommendation: 11.1V LiPo

• Construction: Reinforced Polymer receiver with metal components

View fullsize

Build Quality & Design

The SA-F04 Flex uses a reinforced polymer receiver for both upper and lower, keeping the weight down while still maintaining durability. Key stress components, such as the outer barrel, buffer tube, and controls—are metal where it matters most.

This approach results in a rifle that feels solid without being overly heavy. It’s a practical design choice, polymer absorbs impact better than cheaper pot metal, which can crack or chip under stress.

You also get:

• Ambidextrous selector switch

• Metal buffer tube

• M-LOK handguard with Picatinny rail

• Adjustable iron sights (windage & elevation)

• Multiple sling mount points

View fullsize

Features Overview

ESA Quick Spring Change System

Allows you to swap springs without full disassembly, useful for adjusting FPS for indoor vs outdoor play.

HAL ETU / MOSFET System

Improves trigger response, protects electronics, and allows programmable trigger settings.

Rotary Hop-Up (TDC Magnus)

Provides consistent BB trajectory and improved accuracy.

Version 2 Gearbox

A widely used, reliable platform with good upgrade compatibility.

View fullsize

Included in the Box

• SA-F04 Flex AEG Rifle

• High-cap 380-round magazine

• M90 spring (lower FPS option)

• Orange plastic flash hider (installed but also comes with metal black flash hider)

• Cleaning / jam rod

• HAL programming card

• Manual (QR code download)

• Stickers and packaging materials

View fullsize

Important Setup Note (Very Easy to Miss)

Before using the Specna Arms SA-F04 Flex AEG Airsoft Rifle, you must activate the trigger system:

• Connect battery

• Set to safe

• Hold trigger for ~5 seconds until you hear a beep

If you skip this step, the rifle will just beep three times and not fire, making it seem defective.

Performance (Initial Impressions)

With an 11.1V LiPo battery, the rifle delivers:

• Fast trigger response

• High rate of fire

• Smooth cycling

Lower voltage batteries will reduce rate of fire and responsiveness, which may be preferable for some players.

View fullsize

Pros

• Excellent price-to-performance ratio

• Lightweight but durable polymer build

• ESA quick spring change system

• MOSFET + programmable trigger (HAL ETU)

• Good internal components (V2 gearbox)

• High-cap magazine included (380 rounds)

• Fully adjustable stock and sights

• Strong customization options (AR platform compatibility)

Cons

• Polymer receiver may feel less “premium” to some users

• Battery space in buffer tube is limited (requires specific size battery)

• Does not come with battery or charger at the lower price

View fullsize

Overall Impression

The Specna Arms SA-F04 Flex AEG Airsoft Rifle is a well-rounded entry-to-mid-level AEG that doesn’t cut corners where it matters. You get modern electronics, solid internals, and strong usability at a price point that’s hard to beat.

It’s especially appealing for players who:

• Want AR-platform compatibility

• Prefer lighter rifles

• Need flexibility between indoor and outdoor play

• Value performance over full-metal aesthetics

View fullsize

Availability:

• Canada: ReplicaAirguns.ca

• USA: ReplicaAirguns.us

Final Thoughts

This is one of those rifles that hits a sweet spot between affordability, performance, and features. It may not have full-metal construction, but in real-world use, that’s not necessarily a downside, and in some cases, it’s actually an advantage.

Field testing will ultimately determine how it performs under real conditions, but based on this overview, it’s a solid option worth considering.

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

View fullsize

Specifications:

• Manufacturer: E&L

• Model: AKS-74N (Essential & Platinum Versions)

• Caliber: 6mm Airsoft BB

• Power Source: AEG (Electric)

• Fire Modes: Semi-Auto / Full-Auto

• Velocity: 350–400 FPS (0.20g BBs)

• Magazine Capacity: ~120 rounds (Mid-cap included)

• Weight: 6.5 – 7.8 lbs

• Length: ~28.9" (folded) / 36" (extended)

• Barrel: ~6.03mm Tight Bore Inner Barrel

• Gearbox: Version 3 Full Metal Gearbox

• Hop-Up: Adjustable

• Construction: Full Steel Receiver + Real Wood Furniture

• Stock: Side Folding Metal Stock

• Rail: AK Side Mount for Optics

• Battery Compatibility: Deans (adapter included for Tamiya)

First Impressions

Today we are taking a look at the E&L AKS-74N, a full steel and real wood AEG airsoft rifle that leans heavily toward realism and collector appeal.

This is not your typical polymer field gun. Right away, the weight, materials, and finish give it a very authentic AK feel. It closely mimics the real steel AK platform, both visually and in handling.

There are two versions available:

• Essential (2.0 version): Focused on reliability

• Platinum version (reviewed): Upgraded MOSFET electronics and enhanced internals for better trigger response and durability

The Platinum version also comes with upgraded presentation-style packaging, making it feel more like a premium product out of the box.

View fullsize

In the Box

• AKS-74N AEG Rifle

• 120-round Mid-Cap Magazine

• Deans to Tamiya Adapter

• Certificate (velocity & joules info)

• Instruction Manual

• Decorative metal medallion

• Small utility bottle

Note: Battery and charger are NOT included.

Walkthrough & Features:

Build Quality

The E&L AKS-74N features a full stamped steel receiver paired with real wood furniture, giving it an extremely authentic look and feel.

• No cheap pot metal here, this is solid, high-quality steel construction

• Real wood furniture adds to the realism but requires more care

• Weight and balance closely resemble a real AK platform

View fullsize

Stock & Handling

• Side-folding steel stock

• Folds down to under 30 inches for compact transport

• Locks securely in both folded and extended positions

This makes it suitable for both transport and tighter CQB-style environments.

Controls & Operation

• Selector switch: Safe / Full Auto / Semi Auto

• Adjustable iron sights (elevation adjustable front & rear)

• Standard AK-style magazine release

• Side-mounted optics rail for AK-compatible scopes

Internal Setup

• Version 3 full metal gearbox (proven and widely supported)

• Adjustable hop-up (accessible via charging handle or dust cover)

• Tight bore barrel (6.03mm) for improved consistency

The Platinum version includes a MOSFET, improving trigger response and electrical efficiency.

View fullsize

Battery Setup

• Uses Deans connector (adapter included)

• Requires stick-style battery to fit inside the receiver tube

• Compatible with:

  • 7.4V (2S) for moderate performance

  • 11.1V (3S) for higher rate of fire

Testing showed a very high rate of fire with an 11.1V battery.

Performance Expectations (Pre-Test)

Since this is a tabletop review, performance testing will be covered in a future field test.

Expected performance:

• 350–400 FPS range (ideal for general field use)

• High rate of fire, especially with 11.1V battery

• Tight bore barrel and hop-up should provide consistent accuracy

View fullsize

Pros

• Full steel construction (very realistic weight & feel)

• Real wood furniture (authentic look)

• Version 3 gearbox (reliable platform)

• Semi & full-auto capability

• Adjustable hop-up

• Folding stock for compact transport

• AK side rail for optics

• Strong FPS range for field use

• Deans connector with adapter included

• Excellent balance of realism and usability

Cons

• Heavier than polymer AEG rifles

• Battery and charger not included

• Real wood requires care (scratches, moisture)

• Higher price point

Pricing (At Time of Recording)

• Essential Version: ~$517 CAD

• Platinum Version: ~$849 CAD

View fullsize

Final Thoughts

If your priority is realism, the E&L AKS-74N is one of the closest AEG representations of an AK platform you can get.

The combination of:

• Full steel construction

• Real wood furniture

• Solid internal components

makes this rifle stand out from typical airsoft options.

While it comes at a premium price and requires separate battery/charger purchase, it delivers a high-end experience that collectors and serious players will appreciate.

For those looking for the most realistic AK-style AEG, this is a strong contender.

Where to Buy

• Canada: www.replicaairguns.ca/aks-74n-steel-wood-aeg-airsoft-rifle

• US: www.replicaairguns.us/airsoft-rifles

View fullsize

In this April 2026 unboxing, there’s a solid mix of power, realism, and variety straight out of the box. Even before opening it up, the size and weight of the package hinted that this wasn’t going to be a light or basic shipment. As usual, this is more of a first look and overview rather than a deep dive, with full tabletop and field test reviews coming later.

CenterPoint AT400 Compound Crossbow Kit (400 FPS)

The first item out of the box is easily the most substantial: an AT400 compound crossbow kit. This is not one of the smaller, backyard-friendly crossbows—it’s a full-sized, high-powered unit designed for serious use.

• Velocity: Rated around 400 feet per second

• Energy: Approximately 142 ft-lbs

• Features:

  • Detachable silent crank system for easier cocking

  • Picatinny rail for mounting optics or accessories

  • Full kit setup with multiple components included

This level of power puts it well into small-to-medium game hunting territory, making it more than just a recreational piece. Because of its size and power, testing it indoors isn’t really practical, so this one will likely get a detailed tabletop breakdown rather than a traditional shooting demo.

View fullsize

Umarex T4E TP50 Gen 2 (.50 Cal Tactical Pistol)

Next up is the Umarex T4E TP50 Gen 2, this time in the all-black tactical version rather than the more recognizable orange training model.

• Caliber: .50 caliber

• Velocity: Up to 465 FPS

• Ammo: Rubber balls (included in the box)

• System: CO2 powered with quick-pierce activation

This version stands out for a couple of reasons. First, the higher velocity suggests noticeably more energy compared to earlier or training-focused versions. Second, the all-black design gives it a much more realistic look, closer to a traditional firearm aesthetic.

Functionally, it uses a spring-fed internal magazine and a preloaded CO2 system, allowing you to keep it ready without gas leakage. When needed, a quick strike activates the CO2, making it immediately usable.

Based on typical .50 cal projectile weights and that velocity, this likely lands somewhere in the mid-to-high teens or possibly around 20 ft-lbs of energy, though exact numbers will be confirmed during testing.

View fullsize

E&L AKS-74N AEG Airsoft Rifle (Legends Series)

The final item in the box is a standout for realism: the E&L AKS-74N AEG airsoft rifle, branded under the “Legends / Legendary Perfection” line.

This is clearly built to replicate the real AK platform as closely as possible.

• Construction:

  • Real wood stock

  • Stamped steel receiver and metal components

  • Folding stock (magnetic lock)

• Operation:

  • AEG (Automatic Electric Gun)

  • Semi and full-auto firing modes

  • Adjustable rear sight (elevation)

• Extras:

  • Deans connector compatibility

  • Included specs sheet with velocity in m/s

The weight is immediately noticeable, estimated around 7–8 pounds, which adds to the realism. The combination of real wood furniture and steel construction gives it a very authentic feel compared to lighter, polymer-heavy Airsoft rifles.

The included magazine is polymer, but it should be compatible with standard AK-style AEG mags, meaning upgrades or swaps are likely straightforward.

Final Thoughts

This unboxing delivers a strong mix across three very different categories:

• High-power archery platform (AT400 crossbow)

• Compact CO2-powered .50 cal pistol (TP50 Gen 2)

• Full-metal, real wood AEG rifle (E&L AKS-74N)

Each item targets a different type of user, from tactical training and backyard use to collectors and realism-focused Airsoft enthusiasts.

As always, this is just the first look. Full tabletop reviews, comparisons, and field tests will break down real-world performance, usability, and value.

For availability and full write-ups, check:

• ReplicaAirguns.ca (Canada)

• ReplicaAirguns.us (USA)

• ReplicaAirguns.com (reviews and videos)

View fullsize

In this Video I perform the field test shooting review for the SIG Sauer P229 pellet pistol. If you’re interested in the full specifications, features, and a closer look at the pistol itself, make sure to check out my tabletop review where I go over all the details on this gun.

For today’s test I’m going to be shooting SIG Sauer lead pellets, roughly 7–8 grains. Because these are standard lead pellets and not lightweight alloy pellets, they’re not going to produce the highest velocity numbers this pistol can achieve. With lighter alloy pellets you will definitely see faster readings.

You could also shoot steel BBs through this gun, but BBs sometimes don’t seal quite as tightly in the barrel as pellets do. When that happens, some of the CO₂ can slip around the BB as it travels down the barrel which can actually reduce velocity slightly. BBs also generally don’t carry energy to the target as well as pellets, so pellets are usually the better option for accuracy and performance.

With these pellets, I’m expecting roughly around the 300 FPS range, so let’s see how it actually performs.

View fullsize

Velocity Test

For the velocity portion I’m going to put five shots through the chronograph to see what kind of numbers we get.

Chronograph Results:

Shot Velocities: 320 FPS - 296 FPS - 303 FPS - 286 FPS - 277 FPS (Average of 296 FPS)

As you can see, the readings are right about where expected, generally around the 300 FPS mark, with a slight drop toward the last shot. That’s fairly typical for CO₂ powered blowback pistols, since some of the gas is being used to cycle the slide.

View fullsize

Accuracy Test:

For the accuracy portion I’ve set up my paper targets at 30 feet downrange.

The SIG Sauer P229 pellet pistol uses a dual rotary 8-round magazine, so instead of the usual 10 shots I normally use in these tests, I’m going to fire eight shots to keep things simple and consistent.

One thing I like about this pistol is the trigger operation. When you start the trigger pull, the first stage rotates the rotary magazine. This part of the pull is very light and smooth, so there’s very little double-action feel. Once that’s done, you reach the single-action hammer release, which is nice and predictable.

To keep the trigger as light as possible I’m going to pre-cock the hammer, which eliminates most of that initial rotation effort and gives you a much lighter break.

View fullsize

Accuracy Results:

After eight shots at 30 feet, the group measured approximately 1.5 inches.

That’s actually pretty good accuracy for a blowback pellet pistol.

The pistol was shooting slightly low out of the box, roughly about two inches low and just a little to the left at this distance. My aim point was just underneath the bullseye so I could see the target above the sights.

The sights on this pistol are fixed, so you can’t adjust them directly. The easiest solution is simply to aim slightly higher and a bit to the right if you want to hit the bullseye consistently at this range.

View fullsize

Sight Upgrade Options:

If you want more precise adjustment, you do have a couple of options:

• Install a slide-mounted red dot using the removable optics plate

• Add a laser to the accessory rail under the barrel

Either of those options would allow you to dial in your point of aim exactly where you want it, which is a nice upgrade path for this pistol.

View fullsize

Shooting Impression

The trigger feels really good, and the blowback action is solid and snappy, though not overly fast.

The slide actually has a bit of that heavier, slightly slower 1911-style blowback feel, which I personally like. Some blowback pistols cycle extremely quickly and can feel a bit artificial, but this one feels more substantial because of the heavier slide weight.

The pistol itself also has good weight and balance, coming in a bit over two pounds, giving it a very realistic feel in the hand.

Overall, it’s a solid, well-built pellet pistol, and like many of the SIG Sauer Airgun products, it feels like a lot of attention went into the design.

SIG doesn’t actually manufacture these Airguns themselves, they design them and partner with manufacturers to produce them, but the quality across their pellet pistols and rifles has generally been very good.

View fullsize

Final Thoughts

The SIG Sauer P229 CO₂ blowback pellet pistol delivers:

• Around 300 FPS velocity with lead pellets

• Realistic blowback action

• Good weight and handling

• Approximately 1.5 inch accuracy at 30 feet

• Multiple options for optic or laser upgrades

Overall, it’s a very enjoyable pistol to shoot and a solid option if you’re looking for a realistic blowback pellet pistol.

Don’t forget to subscribe, and check us out on Facebook, Twitter, and Instagram.

If you’re interested in buying Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and Accessories, be sure to visit our online Canada and US Stores.

Available in our Canada Replica Airguns Store. Also check out:

• Buy the Sig Sauer P229 in Canada

• Buy the Sig Sauer P226 in the US

In this Table Top Review we’re taking a close look at the Sig Sauer P229 CO2 Blowback Pellet Pistol. This is the tabletop portion only, no shooting in this review as my Field Test Shooting Video will follow later on.

If you’re familiar with the Sig Sauer ASP P226 platform, the P229 version is the same general system in a more compact package, with one major upgrade: it’s optics-ready!

View fullsize

Specifications

• Manufacturer: SIG SAUER

• Power Source: 12g CO2

• Ammunition: .177 pellets (also supports steel BBs)

• Action: Semi-auto, blowback

• Trigger: DA/SA (double action / single action)

• Magazine: 16 rounds (twin 8-shot rotary clips, loaded on both ends)

• Barrel: Rifled inner barrel

• Sights: White dot sights

• Safety: Manual safety lever with de-cocker function

• Claimed Velocity: up to ~380 fps (real-world varies with temperature and cadence)

• Shots per CO2: roughly 50–60 (varies with temperature/cadence)

• Weight: 35.2 oz / 1.0 kg (2.2 lb)

• Overall Length: 7.7 in (P229)

• Optics: optics-ready slide / SIG AIR reflex-sight mounting provision

• Muzzle threads: M14x1 CCW

View fullsize

In the Box

• P229 CO2 blowback pellet pistol

• Manual

• Sight/plate parts for the SIG AIR reflex mounting setup (for red dot use)

P226 vs P229 - What’s Different?

These two share the same general operating system (CO2 blowback, DA/SA, rotary-mag that works with pellets/BBs), but the P229 version changes a few important things:

View fullsize

Key Differences

• Size: P229 is shorter (7.7 in) vs P226 (8.25 in).

• Weight: P229 is lighter (35.2 oz / 2.2 lb) vs P226 (~39.1 oz).

• Optics: P229 is optics-ready (SIG AIR reflex mounting provision); P226 platform is typically not.

• Muzzle threads: P229 uses M14x1 CCW (P226 commonly uses a different thread direction/size).

Bottom line: if you liked how the P226 handled and performed, the P229 should feel very familiar, just more compact, with the bonus of being set up for a dot.

Walk-Around & Handling

The P229 has that classic SIG profile and a very “real pistol” feel in the hand, helped by the mostly-metal build and full weight.

View fullsize

Notable features and controls:

• DA/SA trigger system: long/heavier first pull in double-action, then lighter single-action after the slide cycles.

• Safety + de-cocker lever: functions like the real-steel concept — you can decock the hammer and run it DA/SA.

• Accessory rail: for a light/laser (training-style setup).

• Optics-ready slide: set up to accept the SIG AIR reflex-style mounting system (sight sold separately).

CO2 System and Magazine Notes

One of the standout features on this platform is SIG’s cam-lever, tool-less CO2 loading system, designed to make cartridge swaps quick and easy.

The magazine is a 16-shot design using twin 8-shot rotary clips. Practical tip: make sure pellets are seated properly in the rotary clip so they don’t hang up during cycling.

View fullsize

Pros

• Mostly metal build with realistic weight and solid feel

• Compact P229 size (shorter than the P226)

• DA/SA trigger + functional safety/de-cocker system

• Blowback action for realism/training value

• Rifled inner barrel (pellet accuracy potential)

• Tool-less cam-lever CO2 loading system

• Optics-ready slide (big upgrade over older-style setups)

• Accessory rail for light/laser

Cons

• Fixed/non-adjustable sights

• CO2 performance is temperature + cadence sensitive (rapid fire cools the system and drops power)

• No last-round hold-open on this style of rotary-mag system

• Rotary clips require good pellet seating to avoid occasional feeding issues

View fullsize

Final Thoughts

The Sig Sauer P229 blowback pellet pistol is a very “SIG-like” training/plinking platform: realistic controls, DA/SA operation, snappy blowback, and a compact duty-pistol footprint. The biggest tabletop takeaway is the optics-ready slide, which makes this version feel more modern than older CO2 pellet pistol designs.

Field test shooting (chronograph + accuracy) will follow in the next video.

Available in our Canada Replica Airguns Store. Also check out:

• Buy the Sig Sauer P229 in Canada

• Buy the Sig Sauer P226 in the US

It’s been a little while since I’ve done an unboxing, so we’ll call this the February 2026 Mystery Box Unboxing Video.

First up: SHOT Show is officially wrapped on my end, interviews, teaser, the whole run. There should be a playlist available so you can binge everything in one place. Now that the heavy editing grind is done, I’m getting back into regular reviews, unboxings, tabletop breakdowns, and full field tests.

Also: we’re back on YouTube and I’m uploading like crazy. I’m moving the library over from Vimeo one-by-one (lots of clicks, lots of time). We’ve got roughly 1,300 videos total, and I’m already around 500 videos in, so if you’re hunting for something specific, use playlists and search because new uploads can get buried fast. If you can, subscribe and share the channel with other Airgun enthusiasts so we can build momentum again.

What was in the box?

View fullsize

1) SIG P229 (.177 Pellet, blowback)

I initially called it a P226, but it’s the P229 (compact). This is a pellet version (not BB), with:

• 16-round rotary stick magazine (8 per side)

• Blowback, semi-auto

• Claimed 380 FPS

• 3.9" barrel, 7.7" overall length

• 2.2 lb, hefty all-metal feel (mag is plastic)

No slide lock-back due to the rotary setup, but it looks great in-hand. Tabletop and field test videos are coming, and I’ll run it on typical lead pellets to see real-world performance.

View fullsize

2) T4E TC68 (.68 cal, CO2/HPA capable)

This is the TC68 trainer that shoots .68 caliber rounds (rubber, powder, paint, pepper ball options depending on what you choose). Specs and highlights:

• Claimed 330 FPS and 16 joules

• 20-round magazine-fed setup

• Supports dual 12g CO2, 88g CO2, and HPA options

• Includes multiple configurations (stocks/adapters) plus a hopper-fed option

I’ll confirm operating modes, setup options, and performance in the upcoming tabletop and field tests.

• Buy the Sig Sauer P229 Pellet Pistol in Canada

• Buy the T4E TC 68 Paintball Rifle in Canada

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

I was in Las Vegas last week for SHOT Show, filming content for Replica Airguns, but I wanted to post a quick update so you know what I was up to.

I went to SHOT Show to connect with people in the industry and record a bunch of interviews with vendors and companies, Airgun and aintball brands included (and more). I ended up filming about seven interviews, and now that I’m home I’ve got a lot of great footage to go through.

I was in Vegas with my buddy Steve (the guy behind the camera). Once the filming was wrapped, we spent some time enjoying the city after a busy week. We also did a few things outside of SHOT Show, because if you’re in Vegas, you might as well experience it.

In this video, we’re at the Montecristo Cigar Bar inside Caesars Palace, winding down with a nice port and a cigar.

Stay tuned,now that I’m back, I’ll start editing and posting those interviews. If you want to watch the SHOT Show interview series, head over to Replica Airguns or watch on our Vimeo and YouTube channels as I post them…

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.

Today we’re looking at the A&K M1873R (the R version). There are a few different versions of this rifle in the lineup (some more compact, some more full-length), and the manual actually shows the variations so watch the video where I point that out.

This is a Table Top Review only, so we’re focusing on specs, details, and a walk-around. I was hoping to follow this up quickly with a Shooting / Field Test Video, but my sample has an issue: it’s leaking gas when I try to fill it (I tested with propane/green gas). I’ll need to sort that out first (repair or replacement), so the field test will have to wait until that’s resolved.

Here some links where you can buy the A&K M1873R in our Canada Replica Airguns and US Replica Airguns Stores

View fullsize

Specifications

• Manufactured By: A&K – Made in China

• Type: Gas-powered airsoft lever action rifle (non-blowback)

• Ammunition: 6mm plastic airsoft BBs

• Power Source: Green gas / propane (internal gas reservoir)

• Action: Lever action / manual cycle (one shot per lever cycle)

• Capacity: 25-round internal magazine (side loading gate)

• Velocity: Approx. 350–400 FPS with 0.20g BBs (temperature/BB weight dependent)

• Hop-Up: Adjustable hop-up system

• Build / Materials:

  • Real wood stock

  • Metal receiver and barrel assembly

  • M-LOK handguard (tactical “modern western” styling)

  • Top Picatinny rail (optics ready)

  • Brass butt plate

• Controls / Features:

  • Enlarged lever loop (glove-friendly)

  • Integrated lanyard ring / sling hoop

• Weight: 4.8 lbs (2.18 kg)

• Overall Length: 27.2 inches (69 cm)

• Barrel Length: 8 inches (20.3 cm)

In the Box

• A&K M1873R rifle

• Mock suppressor (cosmetic)

• Speed loader (you’ll want this for loading the internal magazine)

• Tools / Allen keys

• Small bag of airsoft BBs

• Simple 1-page manual

View fullsize

Manual Notes: Different Versions

The manual shows several versions of this lever action platform. Some are more compact and some are more traditional full-length lever rifles. There’s also a version that appears to run without the longer front barrel extension setup, which, honestly, is the version I’d personally lean toward since the included mock suppressor is mostly cosmetic.

Walk Around

This is a really sharp-looking rifle, it has that classic lever gun vibe thanks to the real wood stock and brass butt plate, but then it mixes in a modern tactical look with the M-LOK hand-guard and top Picatinny rail.

A few key points when handling it:

• No sights included: there are no iron sights on this rifle, so you’ll want to add your own optic (red dot, scope, or rail-mounted irons).

• M-LOK handguard + top rail: lots of freedom to build the look you want, keep it clean, or “tactical western” it up with accessories.

• Internal mag / side loading gate: loads like a real lever gun, through the side. The external profile stays clean (no big mag hanging out).

• Enlarged lever loop: easier to run with gloves or bigger hands, and it just looks right on this style of rifle.

• Sling / carry: it includes a metal lanyard ring / sling hoop, so carrying it is easy if you want it strapped while moving around.

View fullsize

Mock Suppressor and Gas Fill

The included “suppressor” is mainly for looks. It does have an orange front, and it doesn’t function as a suppressor (it’s not extending the inner barrel either).

Important practical detail: you’ll need to remove the mock suppressor to access the gas fill valve, which means you’ll want to keep the included tool (or something similar like a washer/coin that fits) with you.

Issue With My Sample: Leaking Gas

My review sample is leaking at the fill area. It looks like someone may have tried to seal it (there appears to be silicone or residue), and there are a few scratches that make me suspect this unit could have been a return. I tried tightening it, but it still leaks and it may be stripped.

This is not what you should expect out of a normal new unit, but I want to mention it because it’s the reason I’m holding off on the field test until it’s fixed.

View fullsize

Pros

• A lever action gas Airsoft rifle is just plain fun (and there aren’t tons of these around)

• Classic look with real wood + brass butt plate, but still has modern utility with M-LOK up front

• Feels solid in the hands (doesn’t feel cheap)

• Top Picatinny rail makes optics easy (and you’ll want optics since there are no sights)

• 25-round internal magazine keeps the outside profile clean

• Enlarged lever loop is great for gloves or cold-weather play

• Lanyard ring / sling hoop makes it easy to carry

• Speed loader makes loading fast once you get the hang of it

• You can run it more compact by skipping the mock suppressor (it’s optional)

Cons

• The internal 25-round magazine is awkward to load without the speed loader, don’t lose it

• Green gas performance is temperature sensitive, which can affect consistency in colder weather

• Not a fast follow-up shooter, you must work the lever for every shot (part of the charm, but it’s a limitation)

• You’ll need to add your own sights/optic (none included)

• The included mock suppressor must be removed to fill gas, which adds a little extra handling

View fullsize

Final Thoughts

The A&K M1873R is a really cool “modern western” mashup, classic lever action styling with real wood and brass, but with M-LOK and a top rail so you can build it out however you want. Lever guns force you to slow down and actually enjoy the shooting experience, and that’s a big part of why they’re so popular (even outside of Airsoft).

Once I get the leak issue sorted on my sample, I definitely want to do the field test, because this is exactly the kind of unique platform that deserves to be shot and evaluated properly. On the table, it looks great, feels solid, and offers a lot of customization potential, you just have to go in knowing it’s lever-action manual cycling, it uses green gas/propane (so temperature matters), and you’ll need to add your own optic since there are no sights included.

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US