View fullsize

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol takes the already popular P320 platform and adds a more tactical, competition-inspired look with the Spectre Comp styling. In this Field Test Review, I focused mainly on real-world shooting performance including velocity, accuracy, trigger feel, blowback action, and overall handling. If you want all the detailed specifications and close-up overview footage, make sure to also check out my Table Top Review video for this model.

For this test I used standard Sig Sauer lead pellets, estimated around 7–8 grains rather than lightweight alloy pellets, giving a more realistic idea of what shooters can expect during normal use. Despite some chronograph frustrations during testing, the pistol delivered fairly consistent velocities once everything settled down. Average readings for my five shots through the Chronograph came in at 270 FPS, with highs reaching about 286 FPS during the initial shots and my slowest shot was 260 FPS. Considering the cooling effect common with CO2-powered airguns, the consistency was actually quite respectable for a blowback pellet pistol.

Accuracy testing was performed at 30 feet using a standard paper target. I fired a full 10-shot group and overall results were solid for a blowback pellet pistol with a higher-capacity belt-fed magazine system. Most shots grouped within roughly 2 inches, although the full spread opened up closer to 2.5–3 inches when including a couple lower shots likely caused by slight velocity variation from CO2 cooldown. Horizontal consistency was very good, with only a slight tendency to drift left. For a rapid-fire capable CO2 pistol with blowback, the accuracy was more than acceptable.

View fullsize

One thing worth mentioning is the trigger feelof the Sig Sauer Spectre Comp. Since the trigger system also advances the pellet belt during firing, there is naturally a bit more friction and a slightly longer pull compared to some rotary magazine designs. Even so, the trigger never felt excessively heavy or unpleasant. Rapid follow-up shots were still easy to manage, and the realistic blowback action adds a lot to the shooting experience.

The 20-round belt-fed magazine system is one of the biggest advantages of the Spectre Comp over many traditional rotary magazine pellet pistols. Instead of dealing with smaller 8-shot or flip-around style magazines, you get a much more enjoyable shooting session with fewer reload interruptions. Combined with the realistic weight, solid balance, and satisfying blowback recoil impulse, this pistol ends up being a very fun and practical option for target shooting and action-style plinking.

If you are looking for a realistic training-style pellet pistol that combines blowback action, higher magazine capacity, and solid handling characteristics, the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol is definitely worth checking out. It offers a nice balance between realism and shooting fun while still delivering respectable accuracy and consistency for casual target shooting.

You can find more information about Airguns, BB guns, Pellet guns, Airsoft guns, Blank guns, and accessories over at Replica Airguns Canada and Replica Airguns US.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer P320 Blowback Pellet Pistol in the US

View fullsize

First Look & Overview

In this table top review, taking a detailed look at the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol, a modern, competition-style airgun replica that closely mirrors its real steel counterpart. This model stands out with its aggressive styling, compensated muzzle, and optics-ready slide, making it one of the more premium-looking pellet pistols currently available.

This is a pellet-only airgun with blowback action, designed more for realism and handling than raw velocity. If already familiar with the Sig Sauer M17 pellet pistol, this one shares a lot of mechanical similarities, including the magazine system.

Specifications

• Caliber: .177 Pellet

• Action: Semi-auto, blowback

• Magazine: 20-round belt-fed rotary system

• Power Source: 12g CO2 (tool-free cam lever system)

• FPS: Claimed 340 FPS

• Weight: ~2.3 lbs

• Overall Length: 8.5 inches

• Barrel Length: 4.6 inches (rifled)

• Construction: Metal slide, polymer frame

• Sights: Fixed white dot front and rear

• Optics Ready: Yes (SIG Air RMR compatible)

• Rail: Picatinny accessory rail

• Safety: Ambidextrous manual safety

View fullsize

Build Quality & Design

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol delivers a solid mix of metal and polymer construction. The metal slide gives it realistic weight and feel, while the polymer frame helps keep things balanced. At around 2.3 pounds, it has a substantial presence in hand without feeling overly heavy.

The grip features enhanced texturing along with a flared magwell, adding to both aesthetics and usability. The slide includes light porting and is optics-ready, allowing for easy installation of a SIG Air RMR red dot.

One standout visual element is the compensated muzzle, which adds to the competition-style look. However, it also impacts field stripping, you’ll need to remove it to fully disassemble the slide.

View fullsize

Magazine & CO2 System

This pistol uses a 20-round belt-fed rotary magazine, which is housed within a drop-out mag body. Loading is straightforward:

• Remove the rotary belt insert

• Load pellets into each chamber

• Reinsert into the mag

CO2 is loaded using a tool-free cam lever system, which is fast and convenient compared to traditional screw-in designs.

Important note: the magazine needs to be firmly seated. A light insertion may not lock it properly, and due to the weight, it could fall out if not fully engaged.

Also worth noting, while the outer mag housing has some polymer components, the internal structure is mostly metal. Still, avoid dropping it on hard surfaces.

View fullsize

Handling & Controls

• Ambidextrous safety works from both sides, though visual indicators are only clearly marked on one side

• Trigger feels closer to double-action due to the rotary magazine indexing

• Slide cycles with blowback but does not lock back when empty

• Takedown lever is present, but full disassembly is limited by the compensator

The trigger has a solid feel and requires deliberate pull due to the indexing mechanism. This is normal for belt-fed pellet systems.

View fullsize

Sights & Optics

The pistol comes with fixed white dot sights, which are effective for quick target acquisition. However, they are not adjustable.

For those wanting more precision, the pistol supports SIG Air RMR optics, replacing the rear sight with an included plate.

Performance Expectations

The claimed velocity is 340 FPS, which is typical for blowback pellet pistols. Expect slightly lower speeds with lead pellets (recommended) compared to alloy pellets.

Blowback operation will also consume more CO2 than non-blowback models, trading efficiency for realism.

If looking for a performance reference, similar results can be expected to the Sig Sauer M17 pellet pistol due to shared internals.

View fullsize

Pros

• Excellent replica accuracy of the P320 Spectre Comp

• Realistic blowback with metal slide

• Good weight and balance (~2.3 lbs)

• 20-round high-capacity pellet magazine

• Tool-free CO2 cam lever system

• Rifled barrel optimized for pellet shooting

• Optics-ready (SIG Air RMR compatible)

• Flared magwell and enhanced grip texture

• Picatinny rail for accessories

• Magazine compatibility with M17

Cons

• Lower FPS compared to non-blowback pellet pistols

• Higher CO2 consumption due to blowback

• Fixed (non-adjustable) sights

• Pellet-only (no BB capability, though this protects rifling)

• Slide does not lock back when empty

• Field stripping requires compensator removal

View fullsize

Final Thoughts

The Sig Sauer P320 Spectre Comp pellet pistol is a strong option for anyone prioritizing realism, handling, and modern styling over raw power. It delivers a premium look with solid functionality, especially for training, backyard shooting, or collectors wanting a high-end replica.

While not the most powerful pellet pistol available, it excels in design, usability, and realism, especially if already a fan of the P320 platform.

For those in Canada, availability may already be live, with US availability likely to follow.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

A surprise “tiny box” delivery turned out to be a solid addition to the lineup, the SIG Sauer P320 Spectre Comp Pellet Pistol. Despite the small packaging, this is a full-featured CO2-powered pellet pistol with a strong focus on realism and competition-style design.

Right out of the box, the Spectre Comp feels substantial, coming in at around 2.29 lbs with a metal slide and polymer frame. It features a semi-auto blowback action and uses a 20-round belt-style pellet magazine, typical of SIG’s higher-capacity pellet systems.

Key highlights include:

• CO2 powered (.177 caliber pellet)

• Blowback action (semi-auto)

• 20-round belt magazine

• Approx. 340 FPS velocity

• Optics-ready slide (RMR plate compatible)

• Ambidextrous safety and controls

• Flared magwell for faster reloads

• Picatinny accessory rail

• Field-strip capable design (with compensator removal)

View fullsize

The pistol leans toward a competition-style setup, featuring a skeletonized trigger, ported slide, and a compensated front end for aesthetics. While the slide does not lock back (common for belt-fed pellet systems), the blowback adds to the overall shooting realism.

Loading is straightforward thanks to the tool-free CO2 system and two-piece magazine design. The trigger pull feels more like a double-action due to the belt cycling, which is typical for this platform.

Overall, the P320 Spectre Comp CO2 Blowback Pellet Pistol looks to be a well-built, feature-rich option for those wanting a realistic training pistol with added competition styling. A full tabletop review and field test shooting results will follow once it’s put through proper testing.

• Buy the SIG Sauer P320 Spectre Comp Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

In this review, we are looking at two crossbows that honestly shouldn’t really be compared, but that’s exactly why this comparison is interesting. On one end, we have the Steambow M10, a compact, magazine-fed, fast-shooting crossbow built for fun, training, and high repetition shooting. On the other, the CenterPoint AT400, a full-size, high-powered compound crossbow designed for serious hunting applications.

Aside from both launching bolts/arrows, these two platforms sit at completely opposite ends of the spectrum. The goal here is not to declare a winner, but to help you decide which one actually fits your use case, or if you might want both.

Key Differences Overview:

Steambow M10

The Steambow M10 is a compact repeating crossbow designed more for fun, training, and high-volume shooting. It uses a magazine-fed system that can hold 10 bolts, allowing for very fast follow-up shots. Depending on the limb setup, it can reach speeds of up to around 200 FPS and produce approximately 10 to 15 foot-pounds of energy. Its lighter draw weight options and easy cocking system make it beginner-friendly and much less physically demanding to use. Overall, the M10 is best suited for target shooting, casual use, and potentially small game with the right setup.

CenterPoint AT400

The CenterPoint AT400 is a full-size compound hunting crossbow built for serious power and hunting use. Unlike the M10, it is a single-shot platform that focuses on accuracy, penetration, and range rather than fast repeat shooting. It sends arrows downrange at about 400 FPS and delivers close to 150 foot-pounds of energy, putting it in an entirely different class. With its roughly 200-pound draw weight, it requires much more effort to cock and reload, usually with a rope or crank system. This makes it better suited for medium to large game hunting, where power and shot placement matter far more than speed.

Side-by-Side Summary

If you want something lightweight, compact, fast, and easy to shoot often, the Steambow M10 is the better fit. If your main goal is hunting and you need maximum power, longer range, and serious downrange performance, then the CenterPoint AT400 is clearly the more appropriate choice. Even though both are crossbows, they are built for very different types of users and very different shooting experiences.

Power & Performance

The biggest separation between these two comes down to raw power.

• The Steambow M10 delivers up to about 10–15 foot-pounds of energy, depending on limb configuration and bolt weight. It’s comparable to higher-end airguns or paintball-level power.

• The CenterPoint AT400, by contrast, produces close to 150 foot-pounds of energy and launches arrows at around 400 FPS.

That’s not a small difference, it’s an entirely different category.

Real-world comparison:

• M10 = backyard shooting, small game potential

• AT400 = deer, and potentially even elk with proper shot placement

This is essentially the difference between a BB gun vs a hunting rifle in terms of role and impact.

View fullsize

Shooting Experience:

Steambow M10

• Magazine-fed (10 bolts)

• Extremely fast follow-up shots

• Break-action style cocking (very quick)

• Great for drills, repetition, and skill building

• Minimal effort required

You can realistically fire 10 shots in about 10 seconds, making it a very engaging and fun platform.

CenterPoint AT400

• Single-shot system

• Requires rope cocking or crank system

• Significant physical effort (200 lb draw)

• Slow reload (often 30–60+ seconds)

This is a deliberate shooting experience, not something designed for volume or speed.

Use Case Breakdown:

Steambow M10 – Best For…

• Backyard shooting (with proper backstop)

• Target practice

• Tactical-style drills

• High repetition training

• Casual and frequent use

• Lower-cost shooting (especially with rubber ball version)

View fullsize

You can even use:

• Rubber balls (low cost, reusable)

• Lightweight bolts

• Indoor-friendly setups (with proper safety)

CenterPoint AT400 – Best For…

• Hunting (deer and potentially larger game)

• Long-range accuracy

• Maximum penetration and power

• Purpose-driven shooting

This is not a casual-use product, you typically bring it out when it matters.

Ease of Use & Physical Demand:

Steambow M10

• Very easy to cock (even at lower draw weights)

• Beginner-friendly

• Lightweight (~compact platform)

• Minimal fatigue

View fullsize

CenterPoint AT400

• High effort required

• Needs cocking tools (rope or crank)

• Physically demanding

• Slower workflow between shots

Key takeaway:
Anyone can pick up and use the M10 easily. The AT400 requires more commitment, strength, and practice.

Size & Portability

Steambow M10

• Compact and lightweight

• Can be partially disassembled easily

• Backpack-friendly

• Ideal for mobile use

CenterPoint AT40

• Large, fixed structure

• Not easily transportable without a case

• Designed for field carry, not casual portability

Ammo & Cost of Ownership:

View fullsize

Steambow M10

• Bolts are smaller and cheaper

• Rubber ball version = extremely low cost

• Less wear and tear overall

• High reusability

CenterPoint AT40

• Arrows are larger and more expensive

• More prone to damage/loss at high speeds

• Requires maintenance and replacement over time

Value Consideration:

Interestingly, both fall into a similar price range (~$400–$500), but value depends on usage frequency:

• M10 → Likely used often → Higher practical value

• AT400 → Used less frequently unless hunting regularly

If something sits unused, its value drops regardless of price.

View fullsize

Who Should Buy Each?

Choose the Steambow M10 if you…

• Want fun, fast shooting

• Plan to shoot frequently

• Prefer low effort and ease of use

• Don’t need high power

• Enjoy tactical or training-style shooting

Choose the CenterPoint AT400 if you…

• Are hunting (especially deer or larger game)

• Need high power and penetration

• Value accuracy and range

• Don’t mind slower reload times

• Are comfortable with physical effort

View fullsize

Final Thoughts

These two crossbows are not competitors—they are tools for completely different jobs.

• The Steambow M10 is about frequency, fun, and versatility

• The CenterPoint AT400 is about power, precision, and purpose

If anything, this comparison highlights that you may not need to choose one over the other, you might actually benefit from having both ends of the spectrum covered.

If neither fits perfectly, then the real answer may be to look for something in the middle.

Where to Buy

Both of these crossbows (or similar models) are typically available through:

• Buy Steambow M10 in Canada

• Buy CenterPoint AT400 In Canada

• Buy in the US

View fullsize

In this April 2026 unboxing, there’s a solid mix of power, realism, and variety straight out of the box. Even before opening it up, the size and weight of the package hinted that this wasn’t going to be a light or basic shipment. As usual, this is more of a first look and overview rather than a deep dive, with full tabletop and field test reviews coming later.

CenterPoint AT400 Compound Crossbow Kit (400 FPS)

The first item out of the box is easily the most substantial: an AT400 compound crossbow kit. This is not one of the smaller, backyard-friendly crossbows—it’s a full-sized, high-powered unit designed for serious use.

• Velocity: Rated around 400 feet per second

• Energy: Approximately 142 ft-lbs

• Features:

  • Detachable silent crank system for easier cocking

  • Picatinny rail for mounting optics or accessories

  • Full kit setup with multiple components included

This level of power puts it well into small-to-medium game hunting territory, making it more than just a recreational piece. Because of its size and power, testing it indoors isn’t really practical, so this one will likely get a detailed tabletop breakdown rather than a traditional shooting demo.

View fullsize

Umarex T4E TP50 Gen 2 (.50 Cal Tactical Pistol)

Next up is the Umarex T4E TP50 Gen 2, this time in the all-black tactical version rather than the more recognizable orange training model.

• Caliber: .50 caliber

• Velocity: Up to 465 FPS

• Ammo: Rubber balls (included in the box)

• System: CO2 powered with quick-pierce activation

This version stands out for a couple of reasons. First, the higher velocity suggests noticeably more energy compared to earlier or training-focused versions. Second, the all-black design gives it a much more realistic look, closer to a traditional firearm aesthetic.

Functionally, it uses a spring-fed internal magazine and a preloaded CO2 system, allowing you to keep it ready without gas leakage. When needed, a quick strike activates the CO2, making it immediately usable.

Based on typical .50 cal projectile weights and that velocity, this likely lands somewhere in the mid-to-high teens or possibly around 20 ft-lbs of energy, though exact numbers will be confirmed during testing.

View fullsize

E&L AKS-74N AEG Airsoft Rifle (Legends Series)

The final item in the box is a standout for realism: the E&L AKS-74N AEG airsoft rifle, branded under the “Legends / Legendary Perfection” line.

This is clearly built to replicate the real AK platform as closely as possible.

• Construction:

  • Real wood stock

  • Stamped steel receiver and metal components

  • Folding stock (magnetic lock)

• Operation:

  • AEG (Automatic Electric Gun)

  • Semi and full-auto firing modes

  • Adjustable rear sight (elevation)

• Extras:

  • Deans connector compatibility

  • Included specs sheet with velocity in m/s

The weight is immediately noticeable, estimated around 7–8 pounds, which adds to the realism. The combination of real wood furniture and steel construction gives it a very authentic feel compared to lighter, polymer-heavy Airsoft rifles.

The included magazine is polymer, but it should be compatible with standard AK-style AEG mags, meaning upgrades or swaps are likely straightforward.

Final Thoughts

This unboxing delivers a strong mix across three very different categories:

• High-power archery platform (AT400 crossbow)

• Compact CO2-powered .50 cal pistol (TP50 Gen 2)

• Full-metal, real wood AEG rifle (E&L AKS-74N)

Each item targets a different type of user, from tactical training and backyard use to collectors and realism-focused Airsoft enthusiasts.

As always, this is just the first look. Full tabletop reviews, comparisons, and field tests will break down real-world performance, usability, and value.

For availability and full write-ups, check:

• ReplicaAirguns.ca (Canada)

• ReplicaAirguns.us (USA)

• ReplicaAirguns.com (reviews and videos)

View fullsize

In this Video I perform the field test shooting review for the SIG Sauer P229 pellet pistol. If you’re interested in the full specifications, features, and a closer look at the pistol itself, make sure to check out my tabletop review where I go over all the details on this gun.

For today’s test I’m going to be shooting SIG Sauer lead pellets, roughly 7–8 grains. Because these are standard lead pellets and not lightweight alloy pellets, they’re not going to produce the highest velocity numbers this pistol can achieve. With lighter alloy pellets you will definitely see faster readings.

You could also shoot steel BBs through this gun, but BBs sometimes don’t seal quite as tightly in the barrel as pellets do. When that happens, some of the CO₂ can slip around the BB as it travels down the barrel which can actually reduce velocity slightly. BBs also generally don’t carry energy to the target as well as pellets, so pellets are usually the better option for accuracy and performance.

With these pellets, I’m expecting roughly around the 300 FPS range, so let’s see how it actually performs.

View fullsize

Velocity Test

For the velocity portion I’m going to put five shots through the chronograph to see what kind of numbers we get.

Chronograph Results:

Shot Velocities: 320 FPS - 296 FPS - 303 FPS - 286 FPS - 277 FPS (Average of 296 FPS)

As you can see, the readings are right about where expected, generally around the 300 FPS mark, with a slight drop toward the last shot. That’s fairly typical for CO₂ powered blowback pistols, since some of the gas is being used to cycle the slide.

View fullsize

Accuracy Test:

For the accuracy portion I’ve set up my paper targets at 30 feet downrange.

The SIG Sauer P229 pellet pistol uses a dual rotary 8-round magazine, so instead of the usual 10 shots I normally use in these tests, I’m going to fire eight shots to keep things simple and consistent.

One thing I like about this pistol is the trigger operation. When you start the trigger pull, the first stage rotates the rotary magazine. This part of the pull is very light and smooth, so there’s very little double-action feel. Once that’s done, you reach the single-action hammer release, which is nice and predictable.

To keep the trigger as light as possible I’m going to pre-cock the hammer, which eliminates most of that initial rotation effort and gives you a much lighter break.

View fullsize

Accuracy Results:

After eight shots at 30 feet, the group measured approximately 1.5 inches.

That’s actually pretty good accuracy for a blowback pellet pistol.

The pistol was shooting slightly low out of the box, roughly about two inches low and just a little to the left at this distance. My aim point was just underneath the bullseye so I could see the target above the sights.

The sights on this pistol are fixed, so you can’t adjust them directly. The easiest solution is simply to aim slightly higher and a bit to the right if you want to hit the bullseye consistently at this range.

View fullsize

Sight Upgrade Options:

If you want more precise adjustment, you do have a couple of options:

• Install a slide-mounted red dot using the removable optics plate

• Add a laser to the accessory rail under the barrel

Either of those options would allow you to dial in your point of aim exactly where you want it, which is a nice upgrade path for this pistol.

View fullsize

Shooting Impression

The trigger feels really good, and the blowback action is solid and snappy, though not overly fast.

The slide actually has a bit of that heavier, slightly slower 1911-style blowback feel, which I personally like. Some blowback pistols cycle extremely quickly and can feel a bit artificial, but this one feels more substantial because of the heavier slide weight.

The pistol itself also has good weight and balance, coming in a bit over two pounds, giving it a very realistic feel in the hand.

Overall, it’s a solid, well-built pellet pistol, and like many of the SIG Sauer Airgun products, it feels like a lot of attention went into the design.

SIG doesn’t actually manufacture these Airguns themselves, they design them and partner with manufacturers to produce them, but the quality across their pellet pistols and rifles has generally been very good.

View fullsize

Final Thoughts

The SIG Sauer P229 CO₂ blowback pellet pistol delivers:

• Around 300 FPS velocity with lead pellets

• Realistic blowback action

• Good weight and handling

• Approximately 1.5 inch accuracy at 30 feet

• Multiple options for optic or laser upgrades

Overall, it’s a very enjoyable pistol to shoot and a solid option if you’re looking for a realistic blowback pellet pistol.

Don’t forget to subscribe, and check us out on Facebook, Twitter, and Instagram.

If you’re interested in buying Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and Accessories, be sure to visit our online Canada and US Stores.

Available in our Canada Replica Airguns Store. Also check out:

• Buy the Sig Sauer P229 in Canada

• Buy the Sig Sauer P226 in the US

In this Table Top Review we’re taking a close look at the Sig Sauer P229 CO2 Blowback Pellet Pistol. This is the tabletop portion only, no shooting in this review as my Field Test Shooting Video will follow later on.

If you’re familiar with the Sig Sauer ASP P226 platform, the P229 version is the same general system in a more compact package, with one major upgrade: it’s optics-ready!

View fullsize

Specifications

• Manufacturer: SIG SAUER

• Power Source: 12g CO2

• Ammunition: .177 pellets (also supports steel BBs)

• Action: Semi-auto, blowback

• Trigger: DA/SA (double action / single action)

• Magazine: 16 rounds (twin 8-shot rotary clips, loaded on both ends)

• Barrel: Rifled inner barrel

• Sights: White dot sights

• Safety: Manual safety lever with de-cocker function

• Claimed Velocity: up to ~380 fps (real-world varies with temperature and cadence)

• Shots per CO2: roughly 50–60 (varies with temperature/cadence)

• Weight: 35.2 oz / 1.0 kg (2.2 lb)

• Overall Length: 7.7 in (P229)

• Optics: optics-ready slide / SIG AIR reflex-sight mounting provision

• Muzzle threads: M14x1 CCW

View fullsize

In the Box

• P229 CO2 blowback pellet pistol

• Manual

• Sight/plate parts for the SIG AIR reflex mounting setup (for red dot use)

P226 vs P229 - What’s Different?

These two share the same general operating system (CO2 blowback, DA/SA, rotary-mag that works with pellets/BBs), but the P229 version changes a few important things:

View fullsize

Key Differences

• Size: P229 is shorter (7.7 in) vs P226 (8.25 in).

• Weight: P229 is lighter (35.2 oz / 2.2 lb) vs P226 (~39.1 oz).

• Optics: P229 is optics-ready (SIG AIR reflex mounting provision); P226 platform is typically not.

• Muzzle threads: P229 uses M14x1 CCW (P226 commonly uses a different thread direction/size).

Bottom line: if you liked how the P226 handled and performed, the P229 should feel very familiar, just more compact, with the bonus of being set up for a dot.

Walk-Around & Handling

The P229 has that classic SIG profile and a very “real pistol” feel in the hand, helped by the mostly-metal build and full weight.

View fullsize

Notable features and controls:

• DA/SA trigger system: long/heavier first pull in double-action, then lighter single-action after the slide cycles.

• Safety + de-cocker lever: functions like the real-steel concept — you can decock the hammer and run it DA/SA.

• Accessory rail: for a light/laser (training-style setup).

• Optics-ready slide: set up to accept the SIG AIR reflex-style mounting system (sight sold separately).

CO2 System and Magazine Notes

One of the standout features on this platform is SIG’s cam-lever, tool-less CO2 loading system, designed to make cartridge swaps quick and easy.

The magazine is a 16-shot design using twin 8-shot rotary clips. Practical tip: make sure pellets are seated properly in the rotary clip so they don’t hang up during cycling.

View fullsize

Pros

• Mostly metal build with realistic weight and solid feel

• Compact P229 size (shorter than the P226)

• DA/SA trigger + functional safety/de-cocker system

• Blowback action for realism/training value

• Rifled inner barrel (pellet accuracy potential)

• Tool-less cam-lever CO2 loading system

• Optics-ready slide (big upgrade over older-style setups)

• Accessory rail for light/laser

Cons

• Fixed/non-adjustable sights

• CO2 performance is temperature + cadence sensitive (rapid fire cools the system and drops power)

• No last-round hold-open on this style of rotary-mag system

• Rotary clips require good pellet seating to avoid occasional feeding issues

View fullsize

Final Thoughts

The Sig Sauer P229 blowback pellet pistol is a very “SIG-like” training/plinking platform: realistic controls, DA/SA operation, snappy blowback, and a compact duty-pistol footprint. The biggest tabletop takeaway is the optics-ready slide, which makes this version feel more modern than older CO2 pellet pistol designs.

Field test shooting (chronograph + accuracy) will follow in the next video.

Available in our Canada Replica Airguns Store. Also check out:

• Buy the Sig Sauer P229 in Canada

• Buy the Sig Sauer P226 in the US

It’s been a little while since I’ve done an unboxing, so we’ll call this the February 2026 Mystery Box Unboxing Video.

First up: SHOT Show is officially wrapped on my end, interviews, teaser, the whole run. There should be a playlist available so you can binge everything in one place. Now that the heavy editing grind is done, I’m getting back into regular reviews, unboxings, tabletop breakdowns, and full field tests.

Also: we’re back on YouTube and I’m uploading like crazy. I’m moving the library over from Vimeo one-by-one (lots of clicks, lots of time). We’ve got roughly 1,300 videos total, and I’m already around 500 videos in, so if you’re hunting for something specific, use playlists and search because new uploads can get buried fast. If you can, subscribe and share the channel with other Airgun enthusiasts so we can build momentum again.

What was in the box?

View fullsize

1) SIG P229 (.177 Pellet, blowback)

I initially called it a P226, but it’s the P229 (compact). This is a pellet version (not BB), with:

• 16-round rotary stick magazine (8 per side)

• Blowback, semi-auto

• Claimed 380 FPS

• 3.9" barrel, 7.7" overall length

• 2.2 lb, hefty all-metal feel (mag is plastic)

No slide lock-back due to the rotary setup, but it looks great in-hand. Tabletop and field test videos are coming, and I’ll run it on typical lead pellets to see real-world performance.

View fullsize

2) T4E TC68 (.68 cal, CO2/HPA capable)

This is the TC68 trainer that shoots .68 caliber rounds (rubber, powder, paint, pepper ball options depending on what you choose). Specs and highlights:

• Claimed 330 FPS and 16 joules

• 20-round magazine-fed setup

• Supports dual 12g CO2, 88g CO2, and HPA options

• Includes multiple configurations (stocks/adapters) plus a hopper-fed option

I’ll confirm operating modes, setup options, and performance in the upcoming tabletop and field tests.

• Buy the Sig Sauer P229 Pellet Pistol in Canada

• Buy the T4E TC 68 Paintball Rifle in Canada

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

I was in Las Vegas last week for SHOT Show, filming content for Replica Airguns, but I wanted to post a quick update so you know what I was up to.

I went to SHOT Show to connect with people in the industry and record a bunch of interviews with vendors and companies, Airgun and aintball brands included (and more). I ended up filming about seven interviews, and now that I’m home I’ve got a lot of great footage to go through.

I was in Vegas with my buddy Steve (the guy behind the camera). Once the filming was wrapped, we spent some time enjoying the city after a busy week. We also did a few things outside of SHOT Show, because if you’re in Vegas, you might as well experience it.

In this video, we’re at the Montecristo Cigar Bar inside Caesars Palace, winding down with a nice port and a cigar.

Stay tuned,now that I’m back, I’ll start editing and posting those interviews. If you want to watch the SHOT Show interview series, head over to Replica Airguns or watch on our Vimeo and YouTube channels as I post them…

In this Umboxing Preview Video I take a quick look at tow Airsoft Guns from KJWorks, one is a Gas Blowback Airsoft Rifle and one is a CO2 Full Blowback Airsoft Pistol. I don’t get into too many of the details or specifications as this is really the first time I have seen either of these Airsoft Guns in person, a full table top and field test video review will be coming up for both of these Airguns down the road but I did want to get them out there so everyone know these are either in the Replica Airguns Online Store or will be showing up soon.

The first item I grabbed out of the box was the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol which looks a lot like a Glock but with a full auto selector switch on the left side of the slide and it also is the TBC model so it comes with a barrel extension that attaches to the inner barrel and the option to add a mock suppressor to the outside barrel threads. This version comes with a CO2 magazine but I am sure there are option to use it with a Gas magazine also.

Next out of the box was the KJWorks M700 Take Down Gas Airsoft Sniper Rifle which is a break down bolt action gas operated Sniper based Rifle as the name suggests. It is super easy to assemble and has a nice smooth bolt with the only sighting option being the addition of a scope added to the included picatinny rail. The base of this rifle is very heavy so it is is not a light weight rifle by any means.

Here are some more details for each of these Airsoft Gun:

KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol

• Type: Airsoft pistol.

• Manufacturer: KJ Works.

• Model: KP-18-TBC-CO2.

• Weight: 1.7 Pounds (775 grams).

• Length: 7.9 inches (20cm).

• Caliber: 6mm BBs.

• Propellant: CO2/GAS.

• Capacity: 22 rounds.

• Velocity: 410 FPS.

View fullsize

KJWorks M700 Take Down Gas Airsoft Sniper Rifle

• Type: Airsoft rifle.

• Manufacturer: KJ Works.

• Model: M700 Gas Takedown

• Weight: 7.9 Pounds (3600 grams).

• Barrel length: 21.9 inches (55.5cm).

• Caliber: 6mm BBs.

• Propellant: GAS.

• Capacity: 11 rounds.

• Velocity: 400-470 FPS.

Wow, two mystery boxes this time to unpack and see what’s inside! I did have a bit of an idea that there was going to be two new BB Blowback CO2 Glocks from Umarex, the same ones I checked out at this years SHOT Show. There was also some more Air Pistols from various companies. One from Novritsch, the SSX23 NBB Gas Airsoft Pistol, that looked like it was Blowback as the slide does cycles. The Daisy 415 Powerline CO2 BB Pistol, a fairly simplistic Air Pistol, the Vigilante Dual Ammo CO2 BB/Pellet Revolver, I’m pretty sure I have visited before from Crosman. And one more item from Umarex, the Umarex Ruger P345 CO2 NBB Airsoft Pistol keeping to the basic low cost theme.

I also got a few accessor items from a company called GEAR STOCK, Some CO2 in 12 and 88 gram along with some 6mm aluminum Airsoft BB’s. A very cool rechargeable red and green laser that comes in a nice hard shell case and it has a picatinny rail on the bottom she you can stack a second accessory under it.

Here are some links and specs for the Airguns I show off in this mystery box video:

Umarex Glock 19 Gen 5 MOS CO2 Blowback BB Pistol

• Type: CO2 Full Blowback BB Pistol

• Velocity: 280

• Weight: 1.44 Pounds

• Length: 6.9 inches

• Ammo Capacity: 17

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

• Type: CO2 Blowback BB Pistol

• Velocity: 450

• Weight: 1.5 Pounds

• Length: 7.95 inches

• Ammo Capacity: 18

View fullsize

Umarex Ruger P345 CO2 NBB Airsoft Pistol

• Type: CO2 NBB Airsoft Pistol

• Velocity: 380

• Weight: 1.7 Pounds

• Length: 7.95 inches

• Ammo Capacity: 15

View fullsize

Novritsch SSX23 NBB Gas Airsoft Pistol

• Type: Gas NBB Airsoft Pistol

• Velocity: 450

• Weight: 1.9 Pounds

• Length: 9.75 inches

• Ammo Capacity: 24

View fullsize

Crosman Vigilante Dual Ammo CO2 BB/Pellet Revolver

• Type: CO2 BB and Pellet Revolver

• Velocity: 465-BB’s / 435-Pellets

• Weight: 2 Pounds

• Length: 11.36 inches

• Ammo Capacity: 6-BB / 10-Pellet round rotary magazines

View fullsize

Daisy 415 Powerline CO2 BB Pistol

• Type: CO2 NBB BB Pistol

• Velocity: 495

• Weight: 1 Pound

• Length: 8.75 inches

• Ammo Capacity: 21

View fullsize

In this part two video of our three part video series covering all the different ammo and barrel types that can be used with the Alias GEM Multi Ammo Mini CO2 Airgun, I test out the .50 caliber Paintball (Rubber Ball) barrel and ammo option to see what velocity and accrual I can get from the Alias Gem CO2 Airgun. If you have too already watch my Table Top Video and or my BB and Airsoft Field Test Shooting Video, then make sure to do so when you get a chance. Right off the bat I want to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not at all an Airgun you are going to want to buy in terms of raw performance as you will see in this video and my other Field Test Videos for it in this series. It is however a very unique Airgun you can shoot up close with and have some fun shooting whatever ammo you decide to go with on that given day.

Starting with velocity, I should have put a brand new CO2 in the Airgun as I end up finding out only getting three good shots out of my remain CO2, because of the super short barrel and rather inefficient use of the CO2, you only get around 12-15 full use shots out of the Alias GEM Multi Ammo Mini CO2 Airgun and that is with the larger 12 gram CO2! For that reason I only based my average velocity through my Chronograph on the first three shots I took, which were all pretty close in velocity. Here are the results: 200, 207, 203 with an average of 203 fps using fairly light weight .50 Caliber Rubber Balls. Again the super short barrel does not do this Airgun any favors in the power department.

View fullsize

Moving onto the accuracy portion of this test, well you really don’t need to watch this part as I was not able to hit my 8x11 target setup 30 feet away. Part of the problem is that there are no sights on the .50 Caliber Paintball Barrel and the other factor is that the Alias GEM Multi Ammo Mini CO2 Airgun kind of throws rounds all over the place no matter what ammo or barrel type you choose, so trying to figure out exactly where to aim is kind of hard and so I may have simply not been aiming in the best location on the target to get best results. In hind sight I probably should have just shot this Airgun a lot closer than I do when making my standard Field Test Shooting Videos, but this is my standard shooting location and so I stuck with it.

After I make my videos, I sometimes see things I did not notice when I was making them, and in this case I can see that the .50 caliber Paintball Rubber Rounds I was using did not always go as deep in the barrel as you need to front load them and kind of tap them and let gravity help ease them in. I should have perhaps used a pencil or something like it to push the Rubber Balls all the way in for more consistent performance in terms of velocity and accuracy. Well now we all know! You are not going to be using this Paintball Airgun for any kind of Paintball war games and so in my opinion I would go with the included 6mm Airsoft BB’s for shooting in areas where a 4.5mm metal BB may not be good idea. The 6mm Plastic Airsoft BB’s seemed to have the highest velocity averaging 383 fps with .25 gram Airsoft BB’s and I was able to get some of them on the paper target at 30 feet away.

• Buy the Alias GEM Multi Ammo Mini CO2 Airgun in Canada

• Buy the Alias GEM Multi Ammo Mini CO2 Airgun in the US

View fullsize

This Field Test Shooting Video for the Alias GEM Multi Ammo Mini CO2 Airgun is part one of three videos where I will be testing out the included 4.5mm Steel BB Barrel and 6mm Airsoft Barrel options that come with it in the box. I also have the .50 Caliber Paintball and rocket Barrels that I will be testing in Field test Videos two and three consecutive to this video. Normally I first test velocity and then I test accuracy, but in this three part video series I test velocity and accuracy at the same time being that the Alias GEM Multi Ammo Mini CO2 Airgun is a single shot pistol. I get the same end testing results as I would normally get, but I do only shoot 5 rounds at the target, spoiler alert the Alias GEM Multi Ammo Mini CO2 Airgun is not all that accurate, so I am not sure if adding another 5 more shots would have shown us a different result.

In terms of velocity, keep in mind the barrel is super short on the Alias GEM Multi Ammo Mini CO2 Airgun at just over 3 inches when using the 4.5mm Steel BB, the 6mm Airsoft, and the .50 caliber Paintball Barrels. That said with 4.5mm Steel BB’s I did average 263 fps and with 6mm .25 gram Plastic Airsoft BB’s, I averaged 383 fps which was actually pretty good. The temperature was mid warm so pretty close to room temperature when I performed my test.

View fullsize

Accuracy was not nearly as good as I was hoping for, I was not expecting stellar results and I would say I got even less than stellar results only getting 3 of the 4.5mm Steel BB’s on the paper target and only 2 of the 6mm Airsoft BB’s on the target. I did struggle with exactly where I needed to aim the Alias GEM Multi Ammo Mini CO2 Airgun as BB’s were so inconsistent. Perhaps if I was able to figure out the ideal aim point, I would have had more BB’s land on the target. Even the sights are hard to use with such a small Airgun having a super short barrel. If you are hoping the .50 caliber Paintball rounds and Rockets (Bolts) do better, don’t count on it…

All in all Alias GEM Multi Ammo Mini CO2 Airgun is a super cool and unique Airgun that has a lot of options when it comes to ammo choice. I would not recommend using it at anywhere close to 30 feet away as I did in this test, this is how my Airgun range is setup. It would be a lot better at 20 feet or even 10 feet since it is not a lot of fun if when you shoot at something, you don’t really ever hit it ;) Stay posted for my upcoming Field Test Shooting Videos for the .50 Caliber Paintballs and the Rockets (Bolts). I have also made a Table Top video you can check out if you are interested in more of the details and specifications along with some nice close up video of the Alias GEM Multi Ammo Mini CO2 Airgun.

• Buy the Alias GEM Multi Ammo Mini CO2 Airgun in Canada

• Buy the Alias GEM Multi Ammo Mini CO2 Airgun in the US

View fullsize

It’s been a while since I made a Field Test Shooting Video, probably well before I went to SHOT Show. I have been working on my SHOT Show 2025 Videos but those Interview Videos are all done and now it’s time to get caught up on some Field Test Shooting Video I have been wanting to make. So today I was able to make my Field Test Review Video for the Umarex DSX 45 Spring BB Pistol and for some this is a pretty entry level BB Pistol many might overlook but if you are simply looking for a 1911 based BB Pistol that is super inexpensive to buy, and cheap to shoot, and you don’t need quick semi auto shooting. Then the Umarex DSX 45 Spring BB Pistol Field Test Review could be an option for you. Make sure to watch my Table Top Review Video for the Umarex DSX 45 Spring BB Pistol for Details, Specifications, Pros and Cons and some nice close up video.

In this video I test out both the velocity and accuracy and I guess to some degree the usability so lets get started with the Velocity or fps portion of the testing. I loaded up the Umarex DSX 45 Spring BB Pistol with a half full hopper of 4.5 mm Steel BB’s, so around 100 BB’s which is way more than I needed and I shot 5 rounds through my Chronograph hitting the following fps: 191, 193, 188, 195, 197 which averaged 193 fps. Umarex claims a velocity of up to 240 fps which I think is a bit high as temperature is not even a factor with a spring piston Airgun, so warmer conditions will not really make much of a difference here.

View fullsize

I then placed a brand new paper target on my backstop 30 feet down range and proceeded to shoot 10 rounds into it using a semi rested shooting position. Hands rested on a sand bag up front and sitting on a stool in the back. This generally gives me pretty good stability while performing these tests, but there is always some human factor to take into consideration. I was not all that impressed with the grouping I got, the Umarex DSX 45 Spring BB Pistol likes to fling BB’s around a bit. You an see them curl so maybe some miscellaneous spin is being added in the barrel but it is not a consistent spin so the BB’s kind of spray all over the target that ended up giving me around a 8 inch grouping. Usually I can get around a 2 inch grouping with a BB Pistol that is generally what I would consider to be good accuracy.

I wish the Umarex DSX 45 Spring BB Pistol Field had hit closer to the 240 claimed fps and was also a bit more accurate as it would then be more usable at the 30 foot range I tested it at. I would suggest if you buy or own this BB Pistol, that you shoot it at targets closer in at 10-20 feet as the poor velocity and accuracy would be a lot less noticeable at these ranges and for that purpose it would be just fine. If you want a super low cost BB Pistol option that is also a decent looking 1911 Replica, and that you don’t need to go out and buy any CO2 to use it. Then take a look at one in our Replica Airguns Online Store. Heck, it’s only $19 US and $29 CAN right now!

• Buy the Umarex DSX 45 Spring BB Pistol in Canada

• buy the Umarex DSX 45 Spring BB Pistol in the US

View fullsize

Type: Pump Spring Piston.
Manufacturer: BUG-A-SALT.
Model: BUG-A-SALT 3.0.
Materials: Metal and plastic.
Weight: 1.5 pounds (680 grams).
Total Length: 21.5 inches (54.6cm).
Barrel Length: 8 inches (20.3cm).
Barrel: Plastic non-rifled.
Propulsion: Spring.
Action: Pump SAO.
Effective Distance: 3 feet.
Ammunition Type: Standard table salt.
Ammunition Capacity: 80 round hopper.
FPS: NA.

View fullsize

Trigger Pull: The trigger pull on the BUG-A-SALT 3.0 Salt Gun is a Single Action Only trigger that requires you to work the pump action to load salt and prepare the hammer to fire in Single Action. There is a little bit of takeup and then a medium trigger pull weight that is about right for a pest control tool like this, as you do not want a super light trigger that could go off unintentionally. When you work the action using the pump, the real sight also pops up not only so you can use it but also to indicate that the BUG-A-SALT 3.0 Salt Gun is loaded and ready to fire.

View fullsize

Accuracy: So far I have not fired or tested out the BUG-A-SALT 3.0 Salt Gun as it is not the time of year for bugs just yet, so that portion of my review is going to have to wait until at least spring time when the bugs and flies come out in full force. I will not be making my traditional Field Test Shooting Video where I shoot at a Paper target setup 30 feet away, or even testing out the velocity in fps as the BUG-A-SALT 3.0 Salt Gun is only rated to shoot up to 3 feet away and I’m not sure how a blast of salt would even be read by a Chronograph or if that information is even important for a fly exterminator like this. I will be making some sort of shooting video for the BUG-A-SALT 3.0 Salt Gun when I am able to find bugs to blast…

View fullsize

Build Quality: The BUG-A-SALT 3.0 Salt Gun is made out of mostly plastic with I assume some metal working parts internally. Even the internal barrel is plastic since you are only shooting salt. The BUG-A-SALT 3.0 Salt Gun does feel solid and the working parts like the pump action, trigger and safety feel durable enough. The salt hopper lid may be a bit flimsy and if that breaks I’m not sure how one would keep the salt in the hopper?

View fullsize

Realism: The BUG-A-SALT 3.0 Salt Gun is not a replica gun to speak of, it kind of looks like a pistol grip pump action shotgun but there is really no way I feel anyone would mistake the BUG-A-SALT 3.0 Salt Gun for a real gun, this is probably good since you may want to keep it out lying around in your house for when you may need to do some bug blasting.

View fullsize

Pros:

• Very unique product, not a lot of competition in the market.

• Makes eliminating flies and bugs a lot more fun, would be fun at get togethers or parties.

• Fairly well built, feels solid and durable.

• Low cost to operate, only requires table salt.

• Can get up to 80 shots per loaded salt hopper.

• Can shoot flies up to 3 feet away.

• Easy to access cross bolt safety.

• Auto pop-up rear sight lets you know it is loaded and ready to fire.

• SAO Trigger is relatively decent.

• No bug guts mess to cleanup.

View fullsize

Cons:

• Not suitable for larger bugs with hard exoskeletons like wasps or larger. Really only meant for flies.

• Not a toy as it could be assumed it is. So be careful around kids as an eye shot could be very painful and cause injury.

• Price is a lot more than a fly swatter that also gets the job done.

View fullsize

Comments:

If you hate flies as much as I do and would like a more sportsman like way to eliminate them rather than your standard fly swatter that basically mushes the fly into a bloody mess on what ever surface you mash it into. Then perhaps something like the BUG-A-SALT 3.0 Salt Gun may be just perfect for you. I am hoping it works as good as the advertising says it does. Based on some of the reviews I have watched it seems ideal for flies but may not so good for larger insects with hard exoskeletons. You are going to pay a lot more for the BUG-A-SALT 3.0 Salt Gun than a dollar store fly swatter will cost you, but I can guarantee you will have a lot more fun using it and no need for the messy bug juice clean up after a kill shot.

• Buy the BUG-A-SALT 3.0 Salt Gun in Canada

• Buy the BUG-A-SALT 3.0 Salt Gun in the US

I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.