Entries in Crossbow,Comparison

April 2026 Replica Airguns Mystery Box Unboxing

No Comments

In this April 2026 unboxing, there’s a solid mix of power, realism, and variety straight out of the box. Even before opening it up, the size and weight of the package hinted that this wasn’t going to be a light or basic shipment. As usual, this is more of a first look and overview rather than a deep dive, with full tabletop and field test reviews coming later.

CenterPoint AT400 Compound Crossbow Kit (400 FPS)

The first item out of the box is easily the most substantial: an AT400 compound crossbow kit. This is not one of the smaller, backyard-friendly crossbows—it’s a full-sized, high-powered unit designed for serious use.

  • Velocity: Rated around 400 feet per second

  • Energy: Approximately 142 ft-lbs

  • Features:

    • Detachable silent crank system for easier cocking

    • Picatinny rail for mounting optics or accessories

    • Full kit setup with multiple components included

This level of power puts it well into small-to-medium game hunting territory, making it more than just a recreational piece. Because of its size and power, testing it indoors isn’t really practical, so this one will likely get a detailed tabletop breakdown rather than a traditional shooting demo.

Umarex T4E TP50 Gen 2 (.50 Cal Tactical Pistol)

Next up is the Umarex T4E TP50 Gen 2, this time in the all-black tactical version rather than the more recognizable orange training model.

  • Caliber: .50 caliber

  • Velocity: Up to 465 FPS

  • Ammo: Rubber balls (included in the box)

  • System: CO2 powered with quick-pierce activation

This version stands out for a couple of reasons. First, the higher velocity suggests noticeably more energy compared to earlier or training-focused versions. Second, the all-black design gives it a much more realistic look, closer to a traditional firearm aesthetic.

Functionally, it uses a spring-fed internal magazine and a preloaded CO2 system, allowing you to keep it ready without gas leakage. When needed, a quick strike activates the CO2, making it immediately usable.

Based on typical .50 cal projectile weights and that velocity, this likely lands somewhere in the mid-to-high teens or possibly around 20 ft-lbs of energy, though exact numbers will be confirmed during testing.

E&L AKS-74N AEG Airsoft Rifle (Legends Series)

The final item in the box is a standout for realism: the E&L AKS-74N AEG airsoft rifle, branded under the “Legends / Legendary Perfection” line.

This is clearly built to replicate the real AK platform as closely as possible.

  • Construction:

    • Real wood stock

    • Stamped steel receiver and metal components

    • Folding stock (magnetic lock)

  • Operation:

    • AEG (Automatic Electric Gun)

    • Semi and full-auto firing modes

    • Adjustable rear sight (elevation)

  • Extras:

    • Deans connector compatibility

    • Included specs sheet with velocity in m/s

The weight is immediately noticeable, estimated around 7–8 pounds, which adds to the realism. The combination of real wood furniture and steel construction gives it a very authentic feel compared to lighter, polymer-heavy Airsoft rifles.

The included magazine is polymer, but it should be compatible with standard AK-style AEG mags, meaning upgrades or swaps are likely straightforward.

Final Thoughts

This unboxing delivers a strong mix across three very different categories:

  • High-power archery platform (AT400 crossbow)

  • Compact CO2-powered .50 cal pistol (TP50 Gen 2)

  • Full-metal, real wood AEG rifle (E&L AKS-74N)

Each item targets a different type of user, from tactical training and backyard use to collectors and realism-focused Airsoft enthusiasts.

As always, this is just the first look. Full tabletop reviews, comparisons, and field tests will break down real-world performance, usability, and value.

For availability and full write-ups, check:

Categories: .50 cal, 6mm, AEG, Airgun News, Airsoft, Arrow, CO2, Crossbow, Full Auto, Paintball, Pistol, Review, Rifle, Semi Auto, Single Shot, Vimeo Video, YouTube Video Tags: Umarex, T4E, TP50, CenterPoint, AT400, A&L, AKS-74N

Replica Airguns March 2026 Mystery Box Unboxing

No Comments

Today’s unboxing, we’ll call it the March 2026 Unboxing Preview!

I had no idea what was in this box, and honestly, I like it that way. It makes every delivery feel a bit like Christmas. A box shows up from the warehouse, I crack it open, and my job is to let you know what’s inside and what might be coming soon to the store. A lot of the time these are products we’ve never carried before. Not always, but usually there’s at least something new or unexpected in the mix.

As usual, getting into the box was its own little challenge. Good thing I had my “box cutter “ handy. Once I finally got through the packaging, it was clear right away this one had some interesting stuff inside.

What was in the box?

1) Annie Oakley Lil’ Sure Shot BB Rifle

First out of the box was something a little different: the Annie Oakley Lil’ Sure Shot.

This one is brought to you by Air Venturi / Western Justice, and it’s essentially a Red Ryder-style lever action BB rifle with some nice Western-themed touches. Right away, it stood out with the stained solid wood stock, wood forearm with engraving, and engraved Annie Oakley artwork.

Here are some of the listed specs and features:

  • Ammo: .177 caliber / 4.5mm steel BBs

  • Action: Lever cocking, spring piston

  • Barrel: Smoothbore

  • Overall Length: 36.25 inches

  • Capacity: 550 BBs

  • Claimed Velocity: Up to 350 FPS

  • Weight: 3.3 pounds

  • Max Shooting Distance: 212 yards

Once I opened it up, it definitely gave me that familiar Red Ryder / Marlin Cowboy vibe, but it feels like it may be just a bit bigger overall. Maybe a slightly longer stock, maybe just a bit more substantial in the hands. I’ll have to compare it side-by-side with a Red Ryder later to know for sure.

A few things I noticed right away:

  • It has a metal lever

  • Metal frame

  • Metal barrel

  • A plastic muzzle tip

  • A rear sight that appears adjustable

  • And surprisingly, a Weaver-style rail on top for mounting an optic

That top rail is actually a nice touch. You could absolutely throw a small scope on this if you wanted to, and why not? It makes for a fun little plinker, and the engraving gives it some real visual appeal too.

I’ve always had a soft spot for these little lever-action BB rifles. They’re just fun. They’re simple, classic, and a great way to introduce younger shooters to safe rifle handling. Rifles like this tend to be a bit easier for beginners since they’re not as quick to wave around as a pistol.

So yes, this one looks like it should be a lot of fun, and I’ll be doing both a Tabletop Review and a Field Test Shooting Review on it soon.

2) .68 Caliber Nylon Balls (100 Count)

Also in the box was a pack of 100-count .68 caliber nylon balls.

These feel noticeably heavier than the rounds I was using in my earlier T4E TC68 review. The previous ones were around the 2.8 to almost 3 gram range, and these new ones feel more like they’re getting up into the high 3 gram to 4 gram area.

That added weight could make them especially interesting to test in the TC68, since more projectile mass can sometimes translate into more energy on target, even if velocity comes down a bit.

So these should be fun to test out, and as it turns out, they may have arrived for a very good reason…

3) Steambow B08 / .68 Caliber Rubber Ball Crossbow Platform

This was the big surprise in the box, and definitely the highlight item.

If you watched my SHOT Show coverage, then you may remember this one from the Steambow booth. It’s a really cool product: basically a magazine-fed rubber ball shooting crossbow-style launcher in .68 caliber.

I had already gotten a chance to try it at SHOT Show, and Steambow was great about letting us check it out there. So it was pretty exciting to see one show up here for review.

Some of the box highlights:

  • Detachable magazine

  • 8-shot capacity

  • .68 caliber projectiles

  • Includes 25 foam balls

  • Comes with a 35-pound limb

  • AR-style adjustable buttstock

  • Protective shooting glasses included

This product has a lot going on in the box. Once I opened it up, there were multiple components and accessories packed inside, including:

  • Main body / receiver section

  • Foregrip

  • AR-style buttstock

  • Upper receiver section with included magazine

  • 35-pound limb

  • Bow string and related accessories

  • Lubricant / wax for the string

  • Mounting hardware and tools

  • Protective glasses

  • 25 included foam balls

There’s definitely going to be some assembly involved before I can do a full review, so that will be part of the tabletop video.

The main unit itself feels solid and substantial. It has some good weight to it, and overall it looks like a very cool design. The included 35-pound limb should offer a decent balance between usability and performance. At SHOT Show we were only using a lighter 25-pound setup, which was very easy to draw, great for casual target practice, but obviously not the high-performance option.

One of the things I like about this platform is that it gives you that crossbow-style shooting experience while using reusable .68 caliber balls. That can make it easier and cheaper to shoot compared to bolt-style systems, where each arrow or bolt can get expensive fast, especially if you miss the target and damage one.

And since I now also have those heavier nylon .68 caliber rounds from the same box, I should be able to test both the included foam balls and the heavier options to see how they compare.

This one should make for a very interesting review.

Final Thoughts

So that was the March 2026 mystery box. We’ve got two very different products here:

Both of these are getting the full treatment, so expect Tabletop Review and Field Test Shooting Review videos for both products.

The Annie Oakley should be a blast to shoot, especially if it performs anything like the other Red Ryder-style guns I’ve reviewed over the years. And the Steambow system looks like it could be a really practical and fun way to enjoy crossbow-style shooting without the cost and fragility of traditional bolts.

I’ve still got a few earlier products to finish up as well, but I’ll be getting to these as quickly as I can.

Thanks for watching another Replica Airguns video. Don’t forget to subscribe, and check the links in the description for products available in our Canada and US stores.

For Canada, visit ReplicaAirguns.ca
For the US, visit ReplicaAirguns.us

And if you’re looking for other products including Airguns, BB guns, pellet guns, airsoft guns, blank guns, and accessories, be sure to check out both stores as well.

Categories: .68 cal, 4.5mm / .177 cal, Arrow, BB, Crossbow, Non Airguns, Paintball, Replica Airguns News, Review, Rifle, Spring Piston, Vimeo Video, YouTube Video Tags: Steambow, AirVenturi, Air Venturi, Annie Oakley Lil Sure Shot

Sig Sauer P229 CO2 Blowback .177 Caliber Pellet Pistol Table Top Review

1 Comment

In this Table Top Review we’re taking a close look at the Sig Sauer P229 CO2 Blowback Pellet Pistol. This is the tabletop portion only, no shooting in this review as my Field Test Shooting Video will follow later on.

If you’re familiar with the Sig Sauer ASP P226 platform, the P229 version is the same general system in a more compact package, with one major upgrade: it’s optics-ready!

Specifications

  • Manufacturer: SIG SAUER

  • Power Source: 12g CO2

  • Ammunition: .177 pellets (also supports steel BBs)

  • Action: Semi-auto, blowback

  • Trigger: DA/SA (double action / single action)

  • Magazine: 16 rounds (twin 8-shot rotary clips, loaded on both ends)

  • Barrel: Rifled inner barrel

  • Sights: White dot sights

  • Safety: Manual safety lever with de-cocker function

  • Claimed Velocity: up to ~380 fps (real-world varies with temperature and cadence)

  • Shots per CO2: roughly 50–60 (varies with temperature/cadence)

  • Weight: 35.2 oz / 1.0 kg (2.2 lb)

  • Overall Length: 7.7 in (P229)

  • Optics: optics-ready slide / SIG AIR reflex-sight mounting provision

  • Muzzle threads: M14x1 CCW

In the Box

  • P229 CO2 blowback pellet pistol

  • Manual

  • Sight/plate parts for the SIG AIR reflex mounting setup (for red dot use)

P226 vs P229 - What’s Different?

These two share the same general operating system (CO2 blowback, DA/SA, rotary-mag that works with pellets/BBs), but the P229 version changes a few important things:

Key Differences

  • Size: P229 is shorter (7.7 in) vs P226 (8.25 in).

  • Weight: P229 is lighter (35.2 oz / 2.2 lb) vs P226 (~39.1 oz).

  • Optics: P229 is optics-ready (SIG AIR reflex mounting provision); P226 platform is typically not.

  • Muzzle threads: P229 uses M14x1 CCW (P226 commonly uses a different thread direction/size).

Bottom line: if you liked how the P226 handled and performed, the P229 should feel very familiar, just more compact, with the bonus of being set up for a dot.

Walk-Around & Handling

The P229 has that classic SIG profile and a very “real pistol” feel in the hand, helped by the mostly-metal build and full weight.

Notable features and controls:

  • DA/SA trigger system: long/heavier first pull in double-action, then lighter single-action after the slide cycles.

  • Safety + de-cocker lever: functions like the real-steel concept — you can decock the hammer and run it DA/SA.

  • Accessory rail: for a light/laser (training-style setup).

  • Optics-ready slide: set up to accept the SIG AIR reflex-style mounting system (sight sold separately).

CO2 System and Magazine Notes

One of the standout features on this platform is SIG’s cam-lever, tool-less CO2 loading system, designed to make cartridge swaps quick and easy.

The magazine is a 16-shot design using twin 8-shot rotary clips. Practical tip: make sure pellets are seated properly in the rotary clip so they don’t hang up during cycling.

Pros

  • Mostly metal build with realistic weight and solid feel

  • Compact P229 size (shorter than the P226)

  • DA/SA trigger + functional safety/de-cocker system

  • Blowback action for realism/training value

  • Rifled inner barrel (pellet accuracy potential)

  • Tool-less cam-lever CO2 loading system

  • Optics-ready slide (big upgrade over older-style setups)

  • Accessory rail for light/laser

Cons

  • Fixed/non-adjustable sights

  • CO2 performance is temperature + cadence sensitive (rapid fire cools the system and drops power)

  • No last-round hold-open on this style of rotary-mag system

  • Rotary clips require good pellet seating to avoid occasional feeding issues

Final Thoughts

The Sig Sauer P229 blowback pellet pistol is a very “SIG-like” training/plinking platform: realistic controls, DA/SA operation, snappy blowback, and a compact duty-pistol footprint. The biggest tabletop takeaway is the optics-ready slide, which makes this version feel more modern than older CO2 pellet pistol designs.

Field test shooting (chronograph + accuracy) will follow in the next video.

Available in our Canada Replica Airguns Store. Also check out:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Pellet, Pistol, Review, Semi Auto, Vimeo Video, YouTube Video Tags: Sig Sauer ASP, Sig Sauer, Sig Sauer P229

Replica Airguns SHOT Show 2026 Steambow Booth

No Comments

We didn’t catch this one at the Steambow booth, we were out at the SHOT Show indoor range checking out Steambow again, Tyler walked us through their brand-new-for-2026 B08: a magazine-fed .68 caliber ball launcher/crossbow that’s just starting to hit availability.

  • New B08 .68 cal “ball launcher” platform (2026): This is a .68 caliber system designed to run .68 spherical projectiles (paint, foam/nylon, and pepper/irritant-type balls were all discussed as compatible options, depending on local rules).

  • 8-shot, removable, pre-loadable magazine: The B08 uses a spring-fed 8-round magazine that inserts at the front. Tyler’s demo made it clear you can pre-load multiple mags and keep shooting quickly.

  • Simple, repeatable action (easy to learn fast): The manual of arms is very “repeat-and-go”: load the mag, cock it, shoot, then cycle and repeat. Steambow describes the system as their familiar AR-Series quick-tilt/quick-clamp style for fast reloading.

  • Ships mild, but can be upgraded for more power: The one I tested was using a 35 lb limb, but it’s built to accept other AR-Series limbs (stronger options sold separately). Tyler specifically said swapping to a much heavier limb can turn it into a high-velocity setup (he referenced up to a 150 lb limb and around 300 fps in his talk).

  • Projectile flexibility is the whole point: If you already have .68 cal paintballs or similar at home, that’s the target “ecosystem” this is built around (so long as they’re spherical).

  • Important safety + legal reality check: Steambow is very explicit that once you move beyond the “low power + soft balls” envelope, the B08 can become very dangerous, they warn that harder/heavier projectiles (including steel balls) raise risks like severe injury/lethality and ricochets, and that irritant/pepper-type rounds may be legally restricted depending on country.

Tyler’s range demo made the main selling points obvious: magazine speed, easy operation, and a huge range of .68 ball options. If we can get it lined up for Canada, it looks like a very versatile multi use platform, especially for anyone who wants .68 cal fun adn then some, without relying on CO2 or HPA.

Categories: .68 cal, Arrow, Crossbow, Field Test, Paintball, Replica Airguns News, Rifle, Vimeo Video, YouTube Video Tags: Steambow

SHOT Show 2026 Las Vegas Replica Airguns Teaser

No Comments

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

Categories: Accessory, Airgun News, Airsoft, Airsoft News, BB, Crossbow, Non Airguns, Paintball, Pellet, Real Gun, Replica Airguns News, Vimeo Video, YouTube Video Tags: SHOT Show 2026

G&G L85 Carbine ETU Airsoft AEG Rifle Table Top Review

No Comments

This one’s really growing on me because it’s not your standard AR platform. We review a lot of AR-style rifles (and there’s nothing wrong with ARs, they’re popular for a reason), but this one has a very different vibe. It’s based on the SA80 British service rifle design and comes in a compact bullpup layout that gives you a long inner barrel without needing a long overall rifle.

Today’s Table Top Review is the G&G L85A2 (A2 version) ETU Airsoft AEG Rifle — and yes, a full Shooting / Field Test Video will be coming shortly. I definitely want to get this one out and properly test it.

This model is available in our Canada store. At the time of recording this review, it wasn’t available in the US store, but I’ll add an equivalent/similar US option (or a list of comparable AEG rifles) in the post links.

Specifications:

  • Manufacturer / Distributor: G&G (Made in Taiwan)

  • Replica Of: SA80 / L85A2 (British 5.56×45 NATO service rifle family)

  • Platform: Airsoft AEG (Electric)

  • Ammunition: 6mm plastic airsoft BBs

  • Operation: AEG with simulated blowback (reciprocating bolt for a slight “tap” feel)

  • Fire Modes: Semi / Full Auto (and programmable for 3-round burst via MOSFET programming)

  • ETU System: Programmable MOSFET + Electronic Trigger Unit (ETU)

  • Motor: High-torque motor (rated around 25,000 RPM)

  • Gearbox / Internals: Full metal gearbox, heat-treated metal gear set

  • Bushings: 8mm oilless bushings for smoother gear rotation

  • Hop-Up: Adjustable hop-up (access via dust cover)

  • Trigger: AEG electric trigger (single-action-only style in practical terms)

  • Safety: Cross-bolt safety

  • Sights: Metal, fully adjustable front & rear

    • Front: elevation

    • Rear: windage

    • Rear peep sight includes two aperture sizes

  • Weight: 6.0 lbs (2.7 kg)

  • Overall Length: 27.5 in (70 cm)

  • Inner Barrel Length: 16 in (40.6 cm)

  • Magazine: 450-round high-cap AR-style AEG magazine (AR/M4-style AEG mags should fit)

  • Velocity: Approx. 370–400 FPS with 0.20g BBs (varies by setup/conditions)

  • Top Rail: Yes (carry handle/rear sight assembly sits here; optics possible with a riser)

  • Flash Hider: Metal AR-style, black (no orange tip on this one)

  • Sling Mounts: Multiple mounting points; front appears reversible L/R, rear has mounts on both sides

Build Quality & Materials:

This rifle has a really solid, substantial feel and is nicely balanced. There’s a lot of metal here.

Notable metal parts include (from what you can see and feel):

  • Upper & lower receiver areas

  • Carry handle / rear sight assembly

  • Front & rear sights

  • Magazine (metal high-cap)

  • Trigger guard (metal for sure)

  • Barrel, flash hider

  • Sling mounts, pins/screws, switches and assorted hardware

Polymer / rubber components include:

  • Handguards

  • Pistol grip

  • Cheek rest area (polymer)

  • Butt plate (rubber)

Overall: it looks great, feels great, and doesn’t feel “toy-ish” at all.

In the Box:

  • G&G L85A2 ETU AEG rifle

  • 1× metal high-cap magazine

  • Cleaning rod

  • Product brochure / extra paperwork

  • Transport muzzle cover / cap

  • Manual access via QR scan (links to G&G’s online manual)

Walk Around Notes:

A few highlights from handling it up close:

  • Bullpup layout: compact overall, but the barrel/inner barrel length is still substantial.

  • Sighting system: the carry handle doubles as the rear sight platform with flip apertures.

  • Optics compatibility: you can mount an optic on the top rail, but you’ll likely want a riser so your eye line sits naturally.

  • Dust cover + hop-up access: you can open the cover and access hop-up adjustments the normal AEG way.

  • Charging handle note: my rifle did not come with the charging handle piece. I checked my unboxing footage and it wasn’t on there and it wasn’t in the box. It’s not essential for function, but at this price point it’s something you’ll want to confirm is included on yours.

Battery Compartment:

The battery area is under the handguard, and here’s the main downside:

  • If you’re running a larger battery, you’ll likely need to remove hardware (including the sling mount and a bolt) to open the lower handguard section.

  • With smaller nunchuck-style batteries, you may be able to fit them in with less disassembly, but bigger packs will probably require tools.

So yes: it works, but it’s not a quick tool-free battery swap design.

Quick Function Check:

I did a quick dry-fire demo using a 9.6V battery, and honestly it felt a bit underpowered/odd (some partial taps and inconsistent behavior). That could be the battery itself (mine was not great), but I would suggest this rifle will really come alive with a proper 11.1V LiPo and hope to use this setup in the field test video.

I’ve seen demos where the rate of fire is very high using an 11.1V setup, so that’s what I’ll be testing with for the shooting video.

Pros:

  • Lots of metal in the construction with a super solid weight, feel, and balance

  • Unique bullpup British-style rifle (not just another AR build)

  • Simulated blowback adds a bit of feedback vs. standard AEGs

  • Works with AR/M4-style AEG magazines (easy to find replacements/midcaps/highcaps)

  • Good optics flexibility on the top rail (carry handle sight system included, or add your own)

  • Programmable fire mode: Full Auto or 3-round burst

  • No orange tip (and if you prefer one for visibility, you can always add your own)

Cons:

  • Limited accessory mounting options (mostly just the top rail; not a modern “add rails everywhere” setup)

  • Battery access can require tools and disassembly, especially for larger batteries

  • Priced on the higher side (around $600+ CAD)

  • My sample was missing the charging handle part, check yours when it arrives

Final Thoughts:

This is a really nice AEG. It feels premium in the hands, the two-tone green looks great, and it’s a cool change from the sea of AR platforms, while still keeping things practical with AR-style AEG mag compatibility.

The simulated blowback isn’t going to replace the feel of a true gas blowback rifle, but it’s a nice touch, and paired with the ETU/MOSFET system and upgraded internals, it helps justify why this model sits in a higher price bracket.

Next up: the field test / shooting video, ideally with a proper 11.1V battery so we can see what this rifle really does when it’s running at its best.

Availability:

And remember we carry air guns, BB guns, airsoft guns, pellet guns, blank guns, and accessories in both our Canada and US stores.

Thanks for watching and reading! Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. More videos coming soon…

Categories: 6mm, AEG, Airsoft, Blowback, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: G&G, L85

KJWorks KP-19S CO2 Blowback Airsoft Pistol Table Top Review

No Comments

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

Specifications:

  • Manufacturer: KJ Works

  • Made In: Taiwan

  • Power Source: 12g CO2

  • Ammunition: 6mm Airsoft BBs

  • Action: Semi-auto, full blowback

  • Trigger: Single-action, skeletonized, adjustable (1911-style)

  • Magazine: Full-size dropout metal magazine, 25-round capacity

  • Weight: 1.96 lbs (890 g)

  • Overall Length: 9.84 inches (250 mm)

  • Inner Barrel Length: 4.25 inches (108 mm)

  • Claimed Velocity: 366+ FPS

  • Hop-Up: Adjustable

  • Rail: Under-barrel Picatinny rail

  • Sights: Fiber-optic front and rear

  • Safety: Ambidextrous

  • Magazine Release: Reversible

  • Threaded Barrel: Inner and outer threading

  • Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

In the Box:

  • KP-19S CO2 Blowback Airsoft Pistol

  • Full-size metal CO2 magazine

  • Inner barrel extension

  • Allen keys

  • Small bag of Airsoft BBs

  • Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

  • Same frame, grip, slide profile, trigger guard

  • Same skeletonized trigger and hammer

  • Same magazine compatibility

Key Differences

  • KP-19 (Non-S):

    • Flared magwell

    • Compensator

    • Removable rear plate for mounting a red dot

    • More competition-oriented configuration

  • KP-19S:

    • No flared magwell (cleaner, more streamlined look)

    • Fixed rear sight

    • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

  • Slide cutouts on the top and sides

  • CNC-style gold/brass-colored fluted barrel visible through the slide

  • Fiber-optic sights that are extremely easy to pick up

  • Ambidextrous safety

  • Reversible magazine release

  • Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

Field Strip:

Field stripping follows a classic 1911 takedown:

  1. Align the slide notch

  2. Push out the takedown pin

  3. Remove the slide assembly

Once opened, you gain easy access to:

  • Inner barrel

  • Recoil spring

  • Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

Pros:

  • High metal content with excellent weight and balance

  • Strong, realistic full blowback action

  • Excellent fit and finish typical of KJ Works pistols

  • High-capacity 25-round metal magazine

  • CO2 or gas compatibility (with appropriate magazines)

  • Dual threaded barrel for accessories and extensions

  • Bright fiber-optic sights (easy to acquire on any background)

  • Short, light, adjustable 1911-style trigger

  • Ambidextrous safety and reversible mag release

  • Easy field stripping and hop-up access

Cons:

  • Grip is wide and may not suit shooters with smaller hands

  • Higher price point compared to similar KWC 1911 models

  • Rear sight is not adjustable and does not accept a red-dot plate

    • Optics would need to be rail-mounted from underneath

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Gas, GBB, Pistol, Review, Semi Auto, Vimeo Video Tags: KJWorks, KP-19S, 1911 TAC, 1911

Steambow AR Series M10 Tactical Crossbow Field Test Review

No Comments

I tested another Steambow model in this Field Test Shooting Video, the Steambow AR Series M10 Tactical Crossbow. Like my other Crossbow Field Test videos, I recorded the Chronograph velocity while I was shooting the target so there was no need for separate segments, everything was done in one go with four cameras rolling. I didn’t put a dedicated camera on the Chronograph because I wanted a camera on the target; my camera glasses generally pick up the chrono readings anyway. I only have so many cameras, but everything recorded as planned. If you want the full specs and a closer look at the M10, watch my dedicated Table Top video.

Steambow quotes about 190–200 fps for the AR Series M10. My six chrono readings were 189, 191, 189, 189, 190 and 191, which worked out to a 190 fps average. Using the included 142-grain, 6.5-inch aluminum bolts produced roughly 11.4 foot-pounds of energy, so both velocity and FPE were basically on target with Steambow’s numbers. That’s adequate for small pests, but humane shots always come down to accuracy, you’ll want head or shoulder placement, and I’m not ready to declare any compact crossbow a guaranteed solution for that. Test accuracy for yourself.

For accuracy I shot six rounds at a paper target 30 feet downrange from my usual seated in the back, hands rested up front shooting position. The first shot from the Steambow AR Series M10 Tactical Crossbow was a few inches low, so I adjusted my point of aim up and ended up with an impressive 1-inch, 4-shot group just left of center. One bolt missed the target entirely, could have been me or a bad bolt (I’ll blame the bolt on that one). Still, for a compact crossbow this was an excellent result, comparable to some pellet rifles.

Overall the Steambow AR Series M10 Tactical Crossbow performed really well. I like the cocking and bolt-feeding system, cocking is simple: shoulder the stock, press the release, then pull the front down using the foregrip for leverage. Even with the higher power of this model you don’t need a lot of strength, and with practice follow-up shots can be quick. I’d add a red dot to the rail to help dial in accuracy and buy a few extra bolts for target practice and hunting. The M10 is one of Steambow’s pricier offerings, but it also has the highest ammo capacity and the most customization options. If you want the ultimate compact crossbow setup, the ability to preload multiple bolts and have extra 10-shot magazines on hand makes the M10 the one to consider.

Categories: Arrow, Field Test, Crossbow, Non Airguns, Repeater, Review, Vimeo Video Tags: Steambow, M10 Tactical

Steambow AR-6 Stinger II Tactical Crossbow Field Test Review

No Comments

I’ve tested a few compact crossbows before, but nothing with a multi-bolt loading system like the Steambow setup I’m testing in this video. As with my other Crossbow Field Test videos, I recorded Chronograph velocity at the same time I was shooting the target so I didn’t need two separate segments, I did it all in one pass with lots of cameras rolling. I didn’t dedicate a camera to the Chronograph for this test because I wanted a camera focused on the target; my camera glasses usually capture the Chronograph readings for me. I only have so many cameras, but everything was captured fine. If you want to learn more about the specifications and details of the Steambow AR-6 Stinger II, then watch my dedicated Table Top Video located here.

Steambow lists 180 fps as the claimed velocity for the Steambow AR-6 Stinger II Tactical. I consistently measured right around 160 fps, pretty close to the claim. Using the included 142-grain, 6.5-inch aluminum bolts my chrono readings ranged from 159 to 164 fps, averaging 163 fps, which is very consistent. That produced about 8.4 foot-pounds of energy, so both velocity and FPE were a little under Steambow’s stated numbers. That’s enough for small pests, but humane shots depend on accuracy, you’ll want head or shoulder placement, and I’m not fully convinced this bow is always up to that task. You’ll need to judge its accuracy for your own use.

On elevation (up and down) the Steambow AR-6 Stinger II was fairly accurate. Where it struggled more was windage: I had to aim noticeably to the right to move bolts toward the bullseye. The sight is very basic (a single fiber-optic post just behind of the Picatinny rail), which likely contributed to the windage issue. Despite that, I managed a roughly 4-inch group at 30 feet, with one bolt behaving like a flyer.

Overall the Steambow AR-6 Stinger II performed well. I really like the cocking and bolt-feeding system — cocking is easy by shouldering the stock, pressing the release, then pulling the front of the bow down using the foregrip for leverage. You don’t need to be super strong to do it, and with practice you could get very quick at follow-up shots. I’d definitely add a red dot to the rail to help dial in accuracy, and I’d buy a few extra bolts for target and hunting. The AR-6 Stinger II is pricier than some basic models, but the ability to preload multiple bolts in the built-in clip and unleash six shots in seconds makes the extra cost worth it to me.

Categories: Arrow, Crossbow, Field Test, Non Airguns, Repeater, Review, Vimeo Video Tags: Steambow, AR-6 Stinger II, Crossbow

Umarex AER16 AEG Full Auto BB Carbine Table Top Review

No Comments

Type: BB Rifle.
Manufacturer: Umarex.
Model: AER16.
Materials: Metal and plastic build.
Weight: 4.9 pounds (2.2 kilograms).
Length: 32.25-35.5 inches (82-90.2cm).
Propulsion: AEG (with Deans Connectors).
Battery: Comes with an 11.1 V 120 Mac Battery and USB Charger.
Action: Semi & Full Auto.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 55 rounds. (650 shots per battery charge Aprox.)
FPS: 430fps.
Rate of Fire: 450+ rounds per minute in full auto (depending on battery voltage).

Trigger Pull: The trigger on the Umarex AER16 AEG full-auto BB Carbine, like most AEGs, isn’t a purely mechanical trigger. It works as an electrical on/off switch, so it feels more like a light, short single-action pull. You’ll notice a small delay between pulling the trigger and the BB firing because the trigger starts a motor that first pulls the spring and piston back. Once the spring is fully drawn and released, it compresses air that propels the 4.5 mm steel BB. Using a higher-voltage battery reduces that delay, since the motor spins faster and returns the spring more quickly, which also raises the full-auto rate of fire.

Accuracy: I have not Field Test Reviewed the Umarex AER16 AEG full-auto BB Carbine or even tried it out yet so far, I hope to make my Field Test Shooting Video for it as soon as I can as I am very interested in how the AER16 performs compared to the Barra 400e which is a very similar AEG 4.5mm BB firing Airgun. If the AER16 shoots anything like the Barra 400e,I can expect it to shoot pretty close to 400 fps, with near 1 inch 10 round groupings in semi auto and slightly larger groups in full auto. You can checkout my Barra 400e Field test here.

Build Quality: The Umarex AER16 AEG full-auto BB Carbine is metal and Plastic in design with a plastic hand guard and receiver. That said, it does have a lot of metal parts including the barrel, buffer tube, magazine, trigger, charging handle, magazine release, dust cover, inner bolt shield, selector switch, sling mount and other bolts and pins! It feels very solid when holding it and the fit and finishes is really good. Since there is less metal all around then you find with the Barra 400e, this makes the AER16 a fair bit lighter coming around 5 pounds versus the Barra’s 7.5 pounds.

Realism: The Umarex AER16 AEG full-auto BB Carbine is based on the AR platform in terms of its overall design without any specific licensing other than Umarex branding. It does have a lot of working parts including the charging handle which opens the dust cover showing the simulated bolt. There is no Hop-up like you would find in a similar Airsoft Rifle but with BB’s this is not so much of a requirement. You will also find a working magazine release for the all metal magazine along with a working selector for semi and full auto shooting. The all metal buffer tube allows for an AR style rear adjustable stock which I would assume you can swap out for just about any AR buffer tube based rear stock.

Pros:

  • No CO2 required so cost to shoot is less.

  • Comes with high volt LiPo battery and charger

  • Very consistent velocity as there is no cool down effect from CO2 cooling the gun (Just like an AEG Airsoft rifle).

  • Have the option to shoot in semi or full auto modes.

  • Lots of metal in construction (buffer tube, magazine, barrel, trigger, dust cover, charging handle, safety switch, magazine release sling mount.

  • Lots of rail option for mounting accessories.

  • Flip up removable sights with fully adjustable rear peep sight (single aperture).

  • 6 position adjustable rear stock.

  • Nice high capacity 55 round magazine, easy and fast to reload with speed loader.

  • Lots of working parts including the charging handle, dust cover, magazine release, selector switch.

  • Comes with safe storage bag for LiPo battery (no fear of burning your house down).

Cons:

  • No blowback operation as with some other Full Auto BB Rifles like the Crosman AR Series.

  • Receiver is plastic not metal.

  • When battery is installed you can not use all the shorter positions of the adjustable rear stock.

Comments:

The Umarex AER16 AEG full-auto BB Carbine is a nice addition from Umarex to what Barra came out with a year or so ago with their 400e AEG Rifle. I like that the AER16 is a true AR Replica which is a very popular design and it is a lot lighter than the kind of heft 7.5 pound Barra 400e which may be a bit much for some smaller or lighter shooters to handle. The Umarex AER16 AEG full-auto BB Carbine also has the advantage that it comes with an included 1.11V 1200mAH LiPo batter and USB Charger so no further purchasing is required to shoot it other than some BB’s which most Air gunners will normally have on hand. One last point to make is that the AER16 is the less expensive option over the Gen 2 Barra 400e that come in both metal and polymer version.

Categories: 4.5mm / .177 cal, AEG, BB, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, AER16, AR15, M4 Carbine

KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol Table Top Review

No Comments

Type: Blowback CO2 Airsoft Pistol.
Manufacturer: Distributed by KJ Works.
Model: KP-18 TBC.
Materials: Metal & Polymer.
Weight: 1.7 pounds (770 grams).
Total Length: 7.9 inches (20cm)
Barrel: 4 inches (10.6cm) metal non-rifled.
Propulsion: CO2 x 1 (Gas mags available).
Action: Semi & full auto blowback, SAO trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 22 round drop out full size metal magazine.
FPS: Claimed 410 (with barrel extension).

Trigger Pull: The trigger on the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol behaves like a true Single Action Only unit, pleasantly light with a fairly short travel. There’s a bit of initial take-up, but you can clearly sense the crisp break near the rear where the release occurs, extremely light, consistent, and free of any noticeable slack. Remember you’ll need to rack the slide to chamber the first BB; after that the blowback mechanism handles all subsequent cycling.

Accuracy: I haven’t yet fired the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol or produced a Field Test Performance video for it. However, I’ve already completed a full field and shooting test for the very similar KJWorks KP-13, so I’d expect comparable on-target performance between the two. I’ll post a full field test and shooting video for the KP-18 TBC down the road, stay tuned.

Build Quality: KJWorks pistols are generally well made, and I expect the KP-18 TBC to follow that pattern. Based on my hands-on time with the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol and my first impressions of the KP-18, fit and finish look excellent. As with other models, you’ll find metal and polymer components positioned where they would be on a real modern semi-auto pistol, which contributes to the solid, authentic feel.

Realism: The KJWorks KP-18 TBC is a close visual replica of the real-steel Glock G18-style pistol, albeit without official licensing. Umarex holds the Glock license for many BB and Airsoft models, and the fact that a green-gas magazine from the Umarex Glock 17 full-blowback fits the KP-18 suggests KJWorks may be manufacturing some Glock-pattern airguns for Umarex. Glock has historically objected to unlicensed replicas in North America, so how this will play out remains unclear. For now, both licensed and unlicensed options exist for buyers.

Pros:

  • Metal and Polymer with decent weight and good feel to it.

  • Heavy Full blowback operation.

  • Excellent fit and finish as always with KJWorks pistols.

  • High capacity full size drop out magazine that holds the CO2 and 22 rounds.

  • Well hidden safety incorporated into the serial number under the barrel.

  • Working trigger safety.

  • White dot front sight and white outlined rear sight for easy target acquisition.

  • All working components like a real steel Glock styled pistol.

  • Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.

  • Comes with barrel extension for higher velocity shooting (Possibly for easier import into Canada).

  • Would make a good training weapon if you are a real steel Glock owner.

  • Has a semi and full auto selector toggle located on the left rear of the slide.

  • Can use CO2 or gas magazines.

  • Field strip-able.

  • No orange tip.

Cons:

  • Sights are not adjustable.

  • Full auto will use CO2 like crazy but may be worth it.

  • Not a licensed version.

Comments:

If you’re a Glock enthusiast seeking a realistic training piece, you can shoot more affordably and in more places, there are more choices than ever. If official licensing matters, Umarex is the go-to option, although I haven’t seen a full-auto Glock from them yet. For those who prioritize a full-auto-style experience, the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol is as close to a real-steel Glock full-auto feel as you’re likely to find. I also appreciate the magazine interchangeability with some Umarex Glock mags if you already own a Glock 17 Airsoft pistol for instance. Whatever route you choose, it’s great to see more Glock-pattern airguns coming to market.

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Full Auto, Gas, GBB, Pistol, Review, Semi Auto, Vimeo Video Tags: Glock 18, Glock 18 TBC, KJWorks, KP-18 TBC

Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver Table Top Review

No Comments

Type: Revolver CO2 Airsoft Pistol.
Manufacturer: Distributed by Umarex.
Model: Smith & Wesson 629 Competitor.
Materials: Mostly all Metal.
Weight: 3.3 pounds (1.55 kg).
Total Length: 12 inches (30.5cm)
Barrel: 6 inches (15cm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Revolver, SA & DA trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 6 round cylinder.
Velocity: Claimed 500fps.

Trigger Pull: The Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver shoots in either single action or double action. If you pull the hammer back, you can shoot in single action which will give you a super short trigger pull with virtually no takeup and a very light and predictable release, perfect for when you are wanting the best possible accuracy out of this Airsoft Revolver. You can also simply just pull the trigger in double action which means your trigger finger is doing all the work of pulling back the hammer and releasing it which is a much longer trigger pull that is between medium and heavy pull, but still fine for quicker action shooting.

Accuracy: So far I have not shot the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver but I have shot a lot of similar shell loading 6 shooter revolvers. Yes the cylinder and the actual shells are a bit larger but this should not really affect accuracy or power. Umarex does claim a max velocity of 500 fps which does seem high, so it will be interesting to see if the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver will actually hit these numbers. In my past Field Test Shooting Video Reviews I am generally able to get at least a 2 inch 6 shot groupings from 30 feet away from my paper target so hopefully that is the case with the S&W 629 Competitor.

Build Quality: If you’re looking for a very solid and hefty Airsoft revolver, than I don’t think there is anything more beefy than the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver. It is a whopping 3.3 pounds and is almost all metal so smaller handed shooters may find this one a bit too much to hold comfortably. Fit and finish is very good and I do really like the satin stainless steel look to it even though Umarex calls it a chrome finish.

Realism: I like the shell loading revolvers for the added realism you get manually loading the cylinder with 6 preloaded shells. In almost all of the shell loading 6 shooter revolvers, the cylinder and shells are actually smaller than what you would find in a real steel 6 shooter revolver, especially the Single Action Army Revolvers as they would normally shoot a .45 caliber shell rather than a .38 caliber shells. So it is nice that Umarex didn’t just go with already to go parts and they gave the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver newly designed larger shells and a larger cylinder, maybe the shells are not actually .44 caliber in size but the larger cylinder and larger shells does give it more realism. Of course almost all the parts function just like they would in a real steel revolver.

Pros:

  • Almost all Metal build with a very heavy weight of 3.3 pounds.

  • Full adjustable rear sight for windage and elevation.

  • Comes with 12 reloadable shells, most only come with 6 shells.

  • Grooved Pistol Grips for added comfort and grip.

  • Picatinny rail on top of barrel for adding a red dot or optional sight.

  • Nice Smith & Wesson markings on gun stamped into the frame.

  • Option of shooting in single or double action, nice light single action trigger.

  • I like the satin stainless finish.

  • Super realistic loading and shooting with the removable shells.

Cons:

  • Does come with an orange tip.

  • No adjustable hop-up I can see.

  • Rather large and heavy so not great for younger or smaller handed shooters.

  • Velocity may be a bit hot for some Airsoft games.

Comments:

I think my main takeaway for the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is that Umarex has a new larger shell and cylinder design, which is closer to the actual shell and cylinder size of a .44 magnum, so maybe we will see this design coming out in future shell loading revolvers. Other noticeable features are for sure the size and weight of this beast. If you add a red dot or optical sight to it, then this Airsoft revolver could weigh in at nearly 4 pounds! If you want the ultimate shell loading revolver than this is probably going to be the choice to go with, unless you want it in 4.5mm steel BB or Pellet versions as at least for right now, it is only available in an Airsoft version, maybe that will change down the road…

Categories: 6mm, Airsoft, CO2, Comparison, Pistol, Review, Revolver, Vimeo Video Tags: Umarex, Smith & Wesson, Smith & Wesson 629

SHOT Show Las Vegas 2025 Replica Airguns Steambow Interview

No Comments

We recently picked up the Steambow line of Compact Crossbows and I have already made a Table Top Review for some of their products. So far I had not shot or tested any of the Steambow product line yet and so it was nice to get the chance to shoot a few different models over in the Archery Pavilion at SHOT Show and also talk with Tobias their product specialist. I did get the chance to drop by the Steambow Booth and talked with the Steambow team and founder about some of their new products coming out including a new Rubber Ball crossbow they are working on that should be coming out in the near future.

Categories: Airgun News, Arrow, Crossbow, Pistol, Repeater, Rifle, Vimeo Video Tags: Steambow, SHOT Show 2025, SHOT Show

SHOT Show Las Vegas 2025 Replica Airguns Teaser

No Comments

I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!

I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…

Categories: AEG, Airgun News, Airsoft, Airsoft News, Arrow, BB, Blowback, Bulk Air, CO2, Break Barrel, Crossbow, Full Auto, Gas, GBB, Multi-pump, Paintball, PCP, Pellet, Pistol, Pump, Repeater, Replica Airguns News, Revolver, Rifle, Scope, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: SHOT Show, SHOT Show 2025, Umarex, ASG, Crosman, Daisy, KWA, Steambow, Barra

Umarex P2P HDP 50 Compact CO2 Rubber and Powder Ball Less Lethal Pistol Table Top Review

No Comments

Type: Less Lethal Pistol.
Manufacturer: Umarex - T4E.
Model: P2P HDP 50 Compact.
Materials: Metal & Polymer.
Weight: 1.3 pounds (585 grams).
Barrel: 4 inches (108mm) Smooth bore.
Total Length: 7.2 inches (183mm).
Power Source: 1x8 gram CO2.
Action: Semi auto - Double action only trigger.
Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball.
Ammo Capacity: 4 Round spring fed internal magazine.
FPS: 365 (11 Joules).

Trigger Pull: The trigger pull on Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so each round feels about the same with spring tension not playing much of a factor. In order to use the trigger, the Pistol will need to be fully charged by loading an 8 gram CO2 and giving it a smack on the bottom of the pistol grip of the CO2 screw. This will pierce the 8 gram CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the pressure indicator will retract and the trigger will not function and a new CO2 will be required for more shooting.

Accuracy: So far I have not tried out the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol in the Replica Airguns Indoor Airgun Shooting Range, I have shot its big brother the Umarex P2P HDP 50 Gen 2 and it did shoot around a 6 inch 6 shot grouping for me with a velocity of around 450 fps that worked out to around a 15 joule energy rating. I do not expect the same from the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol as it is claimed with a lower velocity of 365 and an energy rating of 11 joules. It should get pretty close to this based on it’s bigger brother’s performance.

Build Quality: The build quality of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is very good overall. It is mostly made out of plastic which is fine, since it is designed to be a compact and portable pistol which should be on the lighter side. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. I wish the trigger guard that swings down to load the ammo clicked back into place better as it seems easy for it to open up and potentially get caught on clothing or objects while using it.

Realism: This version of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol comes with the orange slide area to show that it is not a lethal firearm. It may also come in an all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. Making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the legal system. That said the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol does look kinda like a modern or futuristic semi auto pistol and functions much the same but with a lot less force.

Pros:

  • Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe a decent amount power to hopefully deter an intruder.

  • It is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.

  • Decent power of claimed 365 fps with a 11 Joules energy rating.

  • Can store the 8 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.

  • Holds 4 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 8 shots per 8 gram CO2.

  • Black post front and orange notch rear sights have enough contrast to make sighting on most targets stand out.

  • Double action trigger feels smooth and not too heavy, also has a trigger safety on it.

  • Comes with 10 rubber and 10 powder balls along with three 8 gram CO2 to get you started.

  • Compact size is nice if you want to cary it with you, (law permitting).

Cons:

  • Uses 8 gram CO2 which are harder to get and more expensive than 12 gram CO2, will also get less shots per CO2 and quicker cool down.

  • No Picatinny rail or adjustable sights.

  • Only holds 4 rounds.

  • In Canada it does not seem you can get pepper balls easily most likely due to import regulations.

Comments:

I really liked the big full size brother of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol and it did turn out to not only be fairly accurate but also performed well in the power category, coming in even a bit higher than the claimed 13 joules of energy with a real world rating for me of 15 joules using standard .50 caliber rubber balls. So I am hoping the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol with its 365 fps rating and 11 claimed joules will at least hit the mark. Yes it is a bit less powerful but it is also a lot smaller and more compact if you where interest in conceal caring it. Again law permitting in your area! Stay posted for my Field Test Shooting Video where I will find out if the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol performs as expected.

Categories: .50 cal, CO2, Comparison, Paintball, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, T4E HDP 50 Compact, T4E PDP

Steambow AR-6 Stinger II Tactical Crossbow Table Top Review

No Comments

Type: Compact Recurve Crossbow.
Manufacturer: Steambow GmbH Austria.
Model: AR-6 Stinger II Tactical.
Materials: Fiberglass, metal & plastic.
Weight: 2.6 pounds (1.2 kilograms).
Length: 22-24.75 inches.
Propulsion: Recurve Bow.
Action: Auto loading - Single action trigger.
Ammunition Type: Aluminum bolts (Comes with 6x 142 grain).
Ammunition Capacity: 6 (Internal magazines).
FPS: 180fps.
Draw weight: 55 pounds.

you need to cock the bow in order for the trigger to be engaged. The trigger mechanism basically just pushes the bow string up and over the lip of the rail releasing the bow, so there is a bit of friction and I would guess it is about 8-10 pounds maybe a bit less. There is no actual safety on the Steambow AR-6 Stinger II Tactical so you will have to practice appropriate finger control so as to not accidentally fire a bolt unintentionally.

Accuracy: I have not recorded my Field Test Shooting Video for the Steambow AR-6 Stinger II Tactical and so I am not sure what to expect. I have shot a similar bow, the Bear X Desire XL Crossbow so it should perform a lot like that one but without the auto loading bolt system. If you want, you can check that Field Test Shooting Video out here, I expect the Steambow AR-6 Stinger II Tactical to have perhaps slightly less power over the Bear X Desire XL as it is rated to have a 55 pound draw as compared to the 60 pounds of the Bear X Desire XL. In terms of accuracy I do not expect anything similar to a pellet or even BB rifles or pistol but I hope to get somewhere near a 6-8 inch grouping with the 6 bolts loaded in the internal magazine.

Build Quality: The Steambow AR-6 Stinger II Tactical is overall well made but does consist of a lot of plastic or polymer, that said it feels sturdy enough when holding it in the hand. The bow itself is fiberglass and the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts, bolts, safety are some sort of plastic. Fit and finish is good. I am hoping the auto bolt loading system will perform well and be consistent but we will find out when I make my Field Test Shooting Video for it soon.

Realism: The Steambow AR-6 Stinger II Tactical is not a Replica pistol or rifle, it is a target bow that one could perhaps use of small game if you become proficient with shooting it. I do think this is a crossover product in terms of interest with people that are also interested in Airguns or target shooting. The other benefit is that it has a lot more power than a non regulated Airgun as the it uses nice heavy 142 grain bolts traveling at near 200 fps which gives an energy rating of around 12 foot pounds, the speed may be less than an Airgun but the energy is a lot higher. If raw power is what you are interested in, then this is your best option for something still compact and quiet if you do not have a firearms license or want to avoid that hassle and the legalities around regulated firearms.

Pros:

  • Light weight and compact.

  • More power than an airgun yet still quiet to shoot so can use discreetly just about anywhere with a good back stop setup.

  • Auto loading system for quick follow up shots.

  • Easy to draw the bow using the stock for leverage.

  • Top and bottom Picatinny rail mounting options for sights and accessories.

  • Fiber optic mid sight setup.

  • Ambidextrous bolt safety easy to engage and disengage.

  • 6 bolts included to fully load the internal magazines.

  • 180 fps (10ft/lbs).

  • Comes with standard fore grip.

  • 5 portion AR compatible adjustable rear but stock.

Cons:

  • Fairly expensive.

  • Sights are not adjustable, mid sight is not as easy to sight in.

  • Will need a good backstop or will lose lots of bolts.

  • Takes a little bit of time to set it up but not too hard, just follow the steps in the manual.

Comments:

The Steambow AR-6 Stinger II Tactical is an interesting product, the autoloading system with built in 6 round magazines turns this from a simple target bow into a bit of an action shooter once you get the reloading down. As a potential pest control solution it for sure has the power as long as you can harness it by practicing to the point where you can get those 142 grain bolts on target and make a humane shot at the ranges you plan on using it for. Having quick follow up shots I feel is necessary just in case the first shot does not quite get the job done. If you don’t need external 10 round magazines or the upgraded accessories found on the Steambow M10 Tactical and want something a little more affordable than check the AR-6 Stinger out as it is very versatile as a compact Recurve Crossbow.

Categories: Arrow, Crossbow, Repeater, Review, Rifle, Vimeo Video Tags: Streambow, AR-6 Stinger II, AR Series

Steambow AR Series M10 Tactical Crossbow Table Top Review

No Comments

Type: Compact Recurve Crossbow.
Manufacturer: Steambow GmbH Austria.
Model: Steambow M10 Tactical.
Materials: Fiberglass, metal & plastic.
Weight: 4 pounds (1.8 kilograms).
Length: 22.75-25.5 inches.
Propulsion: Recurve Bow.
Action: Auto loading - Single action trigger.
Ammunition Type: Aluminum bolts (Comes with 20x 142 grain).
Ammunition Capacity: 10 (Removable magazines x2).
FPS: 190-200fps.
Draw weight: 75 pounds.

Trigger Pull: The trigger pull on the Steambow M10 Tactical Recurve Crossbow is a single action only trigger as you need to cock the bow in order for the trigger to be engaged. The trigger mechanism basically just pushes the bow string up and over the lip of the rail releasing the bow, so there is a bit of friction and I would guess it is about 8-10 pounds maybe a bit less. There is a metal bolt style safety just above where the trigger releases that is ambidextrous, push it forward for safe and back for fire.

Accuracy: I have not recorded my Field Test Shooting Video for the Steambow M10 Tactical Recurve Crossbow and so I am not sure what to expect so far. I have shot a similar bow, the Bear X Desire XL Crossbow so it should perform a lot like that one but without the auto loading bolt system. If you want, you can check that Field Test Shooting Video out, I expect the Steambow M10 Tactical Recurve Crossbow to have a bit more power over the Bear X Desire XL as it is rated to have a 75 pound draw as compared to the 60 pounds of the Bear X Desire XL. In terms of accuracy I do not expect anything similar to a pellet or even BB rifles or pistol but I hope to get somewhere near a 6-8 inch grouping with the 10 bolts.

Build Quality: The Steambow M10 Tactical Recurve Crossbow is well made but does consist of mostly plastic or polymer, that said it feels sturdy enough when holding it and is one of the heavier compact recurve Crossbow systems at 4 pounds. The bow itself is fiberglass and the only real metal I can confirm is the cocking rail, mostly everything else other than the nuts, bolts, safety and sling ring are some sort of plastic. Fit and finish is good. I am hoping the auto bolt loading system will perform well and be consistent but we will find out when I make my Field Test Shooting Video for it

Realism: The Steambow M10 Tactical Recurve Crossbow is not a Replica pistol or rifle, it is a target bow that one could perhaps use of small game if you become proficient with it. I do think there is a crossover product in terms of interest with people that are also interested in Airguns. The other benefit is that it has a lot more power than a non regulated Airgun as the it uses nice heavy 142 grain bolts traveling at near 200 fps which gives an energy rating of around 12 foot pounds. If raw power is what you are interested in, then this is your best option for something still compact and quiet if you do not have a firearms license or want to avoid that hassle and the legalities around it.

Pros:

  • Light weight and compact.

  • More power than an airgun yet still quiet to shoot so can use discreetly just about anywhere with a good back stop setup.

  • Auto loading system for quick follow up shots.

  • Easy to draw the bow using the stock for leverage.

  • Comes with bow pre-strung and ready to mount.

  • Lots of Picatinny rail mounting options for sights and accessories.

  • Fiber optic front sight with two rear sight options (grove and peep).

  • Ambidextrous bolt safety easy to engage and disengage.

  • 20 bolts included to fully load both 10 round magazines.

  • 190-200 fps (11-12ft/lbs).

  • Comes with upgraded fore grip.

  • 6 portion AR compatible adjustable rear but stock with cheek adjustment.

Cons:

  • Fairly expensive.

  • Sights are not adjustable.

  • Will need a good backstop or will lose lots of bolts.

  • Takes a little bit of time to set it up but not too hard, just follow the steps in the manual.

Comments:

The Steambow M10 Tactical Recurve Crossbow is an interesting product, the autoloading system with 10 round magazines turns this from a simple target bow into a bit of an action shooter once you get the reloading down. As a potential pest control solution it for sure has the power as long as you can harness it by practicing to the point where you can get those 142 grain bolts on target and make a humane shot. Having quick follow up shots is necessary just in case the first shot does not quite get the job done. The upgraded add on accessories you get with the Steambow M10 Tactical Recurve Crossbow really give it a quilty feel and it is nice you not only have a fully adjustable AR compactly rear stock with a cheek rest but you have the option of a peep or grove rear sight to line up the fiber optic front sight. The price is on the high side but if you want the most ultimate Compact Recurve Crossbow auto loading system with maximum ammo then this is for sure the product for you.

Categories: Crossbow, Repeater, Review, Rifle, Vimeo Video Tags: M10 Tactical, Steambow, Recurve Compact Crossbow

Steambow AR-6 Stinger II Tactical and M10 Tactical Preview Video

No Comments

I did my unboxing vide for both the Steambow AR-6 Stinger II Tactical and M10 Tactical already which is generally a preview of the products I am unboxing but with these types of compact crossbows, they generally need a bit of setup before they are complete and ready to view and use.

For that reason I wanted to make a quick combined Preview Video for Steambow AR-6 Stinger II Tactical and M10 Tactical Crossbows so you can see what they look like all put together, and what the main differences are between the two of them. This way you can figure out which one might be the best choice if you are in the market for a product like this.

Let’s go over the main specifications and differences to determine what you get with each one:

  • Distributed by: Steambow GmbH Austria.

  • Materials: Mostly plastic with some metal parts.

  • Weight: M10 4 pounds / AR-6 2.6 pounds.

  • Lengt: M10 24.2 inches / AR-6 22 inches.

  • Width: M10 17.5 inches / 17.5 inches.

  • Magazine Capacity: M10 10 bolts per external magazine / AR-6 6 bolts per internal magazine.

  • Bow Tension: M10 75 pounds (12 foot pounds) / AR-6 55 pounds (10 foot pounds).

  • Picatinny Rails: M10 top, sides, bottom / AR-6 top, bottom.

  • Sights: M10 fiber optic front, peep or grove rear / AR-6 fiber optic mid.

  • Rear stock: M10 AR type upgraded 6 position / AR-6 AR type 5 position.

  • For-grip: M10 yes upgraded / AR-6 yes standard.

  • Safety: M10 yes bolt / AR-6 no.

  • Sling mount: M10 yes on receiver / AR-6 yes on stock.

  • M10 extras: 20 bolts, 2 magazines, 2 rear sight options, pre-strung, more power.

  • Price at time of this video: M10 $569 CAN / AR-6 $389 CAN.

Categories: Crossbow, Pistol, Review, Rifle, Single Shot, Vimeo Video, Repeater Tags: Steambow, AR-6 Stinger II Tactical, M10 Tactical, Recurve Compact Crossbow

Mystery Box Unboxing Video December 2024

No Comments

Another Mystery Box to share with everyone but this time I peaked a bit so it’s not as much of a mystery for me, but it will be for you. I was glad I peaked as the items inside where not the usual assortment and it was good I was able to get a bit of pre-intel on them before I jumped into this unboxing, as there was a lot to discover about each of the three items in the Mystery Box. I hope they appeal to some of you, I think they are very interesting and after checking them out, some of you may decide to add one or two of them to your collection.

The first two items I looked at are from an Austrian based company called Steambow. They are both compact crossbows that offer a unique reloading system with built in Magazines that hold either 6 or 10 rounds depending on the version you buy. The Steambow AR-6 Stinger II Tactical is the less expensive yet still “kind of expensive” version with a built in 6 round magazine While the AR Series Steambow M10 Tactical has an upper that accepts 10 round magazines you can preload. The Steambow AR-6 Stinger II Tactical comes with a 55 pound pre-strung bow that produces around 10 foot pounds of energy, while the Steambow M10 Tactical come with a 75 pound pre-strung bow which should produce close to 12 or more foot pounds of energy. Both incorporate fiber optic slights, lots of rail mounting options, AR style rear stocks which shoulder mount easy and quick cocking to make the most of the automatic bolt loading systems.

Another Archery based item also in this months Mystery Box was the Umarex AirJavelin FishR PCP based arrow launcher designed for anglers. It is intended to work with a fishing real of your choice and comes with a single retrievable barbed arrow, so a lot like bow fishing but with a PCP propulsion system. The Umarex AirJavelin FishR has a built in 4500 psi tank that is regulated to 800 psi and the arrow is a whopping 1250 grain to cut through the water with ease. The entire system is salt water resistant so you can use it in both fresh and salt water conditions. There are both picatinny and M-LOK mounting options for sights and accessories.

Stay posted for my Table Top and Field Testing Video Reviews coming shortly…

Categories: Bulk Air, PCP, Review, Rifle, Single Shot, Vimeo Video, Crossbow, Pistol, Repeater Tags: Umarex, Airjavelin Fisher, Airbow, Steambow, AR-6 Stinger II Tactical, M10 Tactical

Umarex P2P HDP 50 Gen 2 CO2 Rubber and Powder Ball Less Lethal Pistol Table Top Review

1 Comment

Type: Less Lethal Pistol.
Manufacturer: Umarex - T4E.
Model: P2P HDP 50.
Materials: Metal & Polymer.
Weight: 1.5 pounds (.7 kg).
Barrel: 4 inches (10.2 cm) Smooth bore.
Total Length: 8.5 inches (21.6 cm).
Power Source: 1x12 gram CO2.
Action: Semi auto - Double action only trigger.
Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball.
Ammo Capacity: 6 Round spring fed internal magazine.
FPS: 485 (13 Joules).

Trigger Pull: The trigger pull on Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so the each round feels about the same with spring tension not playing a factor. In order to use the trigger, the Pistol will need to be fully charged by loading a 12 gram CO2 and giving it a smack on the bottom of the pistol grip. This will pierce the CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the trigger will not function and a fresh CO2 will needed to be swapped over.

Accuracy: So far I have only briefly tried out the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol here in the Replica Airguns Indoor Airgun Shooting Range, and I was rather impressed at the initial performance as it did seem to be moving the .50 call rubber balls I was shooting at close to 500 fps with a lot of energy as my pepper and cardboard target was dislodged from the backstop after a few shots. Accuracy seems to be as expected from a Paintball type pistol, so I am expecting to get around a 4-6 inch 6 shot grouping at 30 feet away which will be effective in a Less Lethal encounter.

Build Quality: The build quality of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is good overall. It is mostly made out of plastic which is fine, as I feel that if it was mostly metal, and because of its larger size, it would be on the heavy side and not something you may want to use in a cary situation if that was your plan. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol does have more than enough weight at 1.5 pounds to feel solid in the hand.

Realism: This version of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol comes with the orange slide to show that it is not a lethal firearm. I have seen all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. So making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the law. That said the Umarex P2P HDR 50 Gen 2 CO2 Less Lethal Pistol does look like a modern semi auto pistol and functions much the same but with less force.

Pros:

  • Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe is enough power to actually dissuade most intruders.

  • In this case I like that it is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.

  • Nice powerful 485fps with a 13 Joules energy rating.

  • Can store the 12 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.

  • Holds 6 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 12 shots per 12 gram CO2.

  • Fiber Optic sights make it easy to line up your target in most lighting conditions and backgrounds.

  • Double action trigger feels smooth and not too heavy or long, also has a trigger safety on it.

  • Can add a tactical light or laser to the under barrel picatinny rail.

  • Comes with 10 rubber and 10 powder balls to get you started.

Cons:

  • It is a bit on the larger size, not going to be easy to cary if that is your plan. I do not know what the legal ramifications of carrying this would be as it is clearly designed for protection and not for lethal encounters.

  • Not a lot of shots per CO2 but the idea here is to quickly deliver as much damage as possible, this is not a weapon for prolonged gun fights.

  • In Canada it does not seem you can get pepper balls easily most likely due to import regulations.

Comments:

The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is a very refreshing product for us here in Canada as up until now similar styled Rubber Ball purpose built self defense products we have been able to get, in my opinion simply did not have enough power to really be effective other than the initial intimidation of holding what looks like a firearm. If it came down to actually shooting it, I don’t believe there would be enough stopping power to deter an intruder. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol on the other hand has a 485 fps, 13 Joules power rating which is a rather big jump from other similar products available to us here in Canada and although it may not stop everyone, I do believe you have a much better chance protecting yourself with the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. If you are looking for something to have at home to help you feel a bit safer, then the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is the absolute best option for Canadians at this time.

Categories: .50 cal, CO2, Comparison, Paintball, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, T4E, HDR 50, Less Lethal