View fullsize

Type: Paintball Rifle.
Manufacturer: Umarex - T4E.
Model: H&K 416.
Materials: Metal & Polymer.
Weight: 3016 grams (6.65 pounds).
Barrel: Metal smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi-Automatic with internal working bolt blowback action.
Ammo Type: .43 Caliber Paintball or Rubber Ball.
Ammo Capacity: 14 Rounds.
FPS: 330-460?

Trigger Pull: The trigger pull on Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is pretty typical of what you would find on an AR styled rifle. Since the internal bolt cycles with each shot, the trigger is engaged and the Paintball rifle is ready for the next shot with a very light and short single action trigger pull.

View fullsize

Accuracy: So far I have not had the opportunity to test the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle other than placing a few rounds down range into my ammo trap to see how it shot and felt. Without actually shooting rounds through the Chronograph I don’t really know what the fps velocity is going to be but I can say it felt like it was shooting perhaps even over 400 fps? Out of the box the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle was shooting rather low but you can adjust the rear sight for windage and elevation.

Build Quality: The build quality of the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is very good since this Paintball gun is made for military and law enforcement training use. You’re going to find high quality metal and polymer where you would normally find them on the real steel version. The bolt carrier is expected to last at least 3000 shots but you do get an extra one included with it.

View fullsize

Realism: The fully licensed Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is about as realistic as you are going to get in a Paintball Rifle. It’s basically made very similar to a GBB Airsoft Rifle of the same type with a working bolt and pretty much all working parts on it. You can even break the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle down into the lower and upper receiver halves. The bolt blowback action is not super strong but this may be a good thing since CO2 usage will be more efficient allowing for higher fps and more shots per CO2.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

View fullsize

Pros:

• Seem to have decent fps, will see when I do my Field Test?

• Full Size drop out magazine that holds 14 .43 caliber Paintballs and the CO2.

• Removable 4 position adjustable stock.

• Removable and adjustable iron sights.

• Lots of rials for adding accessories.

• Fully licensed H&K 4116 replica via Umarex.

• Blowback does give a bit of recoil feedback and allow for a true single action trigger.

• Very high quality metaled polymer build.

• Used as a training weapon for military and law enforcement.

• Comes with extra bolt carrier.

Cons:

• Very expensive, well over $1000!!

• Comes with blue hardware but can be swapped out (Pistol grip, But stock, Magazine).

• Bolt carrier may wear out at around 3000 rounds.

View fullsize

Comments:

If’ you’re looking for the ultimate in Paintball Rifle realism the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is going to meet that requirement for sure. It will come at a pretty decent cost but you are going to have a very unique Airgun that not many people will own. And as they say you do get what you pay for which is realism, quality and reliability. I look forward to testing out the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle on the Chronograph using some rubber ball ammo, I may even take it outside for some paintball ammo shooting, we will have to see…

Buy in the Canada Replica Airguns Store or the US Replica Airguns Store

I do my best to get back to everyone with a question I have the answer to but there are times when I simply do not have the answer to your question. And for some reason these questions seem to come more often than others. I figured I would address these questions that I can not answer so you will know the reasons why and that I’m not just being a jerk by not answering them for you.

Here is a list of my Top 5 most often asked Questions I Can Not help you with:

1. Can you send this gun to …

2. How much is this item where I live?

3. How do I fix this problem with my gun?

4. Which Airgun should I buy?

5. Can this Airgun kill a …

The subject of Red/Orange tips on Airguns is often a bit controversial, the idea behind putting a Red or Orange tip on an Airgun is to distinguish an Airsoft gun from a “Real Gun”. Is this really a good idea? Do we really want to encourage people from treating an Airgun as if it was not real? Does the Orang/Red tip give people the wrong idea that an Airgun can be used with less responsibility than a real gun and if so what are the consequences.

View fullsize

In my “Is a Red or Orange Tip on an Airgun a Good or Bad Idea” YouTube Video I dress two main issues I have with putting Red or Orange Tips on Airguns and in this case I am talking mainly from the perspective of a person living in North America where we often see Red/Orange tips on Airsoft guns that come from the US. In Canada our legally imported Airsoft guns do not require Red or Orange tips since they are actually considered unregulated firearms as an Airsoft gun has been determined to be able to cause serious injury.

View fullsize

Main Point Number 1:
Does adding a Red or Orange tip give the false impression that an Airgun is a toy and can be treated just like a toy? Would you give an Airgun to a child unsupervised? Can an Airgun cause a serious injury or even death, and if so why is an Airgun potentially less dangerous than a “Real Gun”?

View fullsize

Main Point Number 2:
Does the additional a Red/Orange Tip on and Airgun make it harder for law enforcement to make a decision when they are forced to act on someone that appears to have a gun and is using it in a dangerous way? What do they do when a person is brandishing what looks to be a firearm but it appears to have a Red or Orange Tip on it? What if someone simply painted the tip Red or Orange to throw people off and make them second guess themselves allowing the perpetrator critical time to get the first and most critical shots off?

I am not trying to stir up any pots here but simply bringing up concerns I have with adding Red or Orange Tips to Airguns. Maybe the powers that be need to reconsider if a Red or Orange Tip on an Airgun is a good or bad idea?

• Buy Airgun related products in Canada

• Buy Airgun related products in the US

If you haven’t already watched My Table Top Video Review for the ROHM RG-89 .380 Caliber Blank Revolver than make sure to do so for the full features and specifications.

My Field Test Shooting videos for blank guns are pretty basic! I can’t test for accuracy since there is no bullet hitting a target and similarly since there is no bullet I can not test the velocity or feet per second power. SO what is there really left to test?

I guess will the blank gun I am testing fire when I pull the trigger? That’s all there is to really test. You may ask why even make a Field Test Shooting Video for a blank gun if you can’t test accuracy and power. I’ll tell you why… Because it’s just fun and it looks good on camera :)

So watch my YouTube video of me popping of some .380 caliber blanks with my ROHM RG-89 .380 Caliber Blank Revolver inside the Sea Can Airgun Shooting Range.

• But the ROHM RG-89 .380 Caliber Blank Revolver in Canada.

• Buy ROHM Blank Guns in Canada.

View fullsize

Type: Blank Revolver.
Manufacturer: ROHM (RÖHM).
Model: RG-89
Materials: Mostly Metal.
Weight: 1.45 pounds (658 grams).
Barrel: Front firing designed for attaching a flare adaptor.
Propulsion: Gun powder.
Action: Single & double action.
Ammunition Type: 9mm / .380 caliber crimped.
Ammunition Capacity: 6 rounds.
FPS: N/A.

View fullsize

Trigger Pull: The trigger pull on the ROHM RG-89 .380 Caliber Blank Revolver in single action is fairly light weight with virtually no take up at all as you would expect from a revolver. The double action trigger pull is much heavier with a smooth release. Mechanically the trigger feels really solid.

Accuracy: NA.

Build Quality: The overall build quality for the ROHM RG-89 .380 Caliber Blank Revolver is excellent, being German made its built to last and the fit and finish is typical German quality. There are steel parts where they need to be like in the barrel, pins, screws and reenforcing parts, the rest of the gun is generally made out of a zinc alloy otherwise know as pot metal with only the moulded grips being made out of plastic.

View fullsize

Realism: The ROHM RG-89 .380 Caliber Blank Revolver is not an exact replica of any given gun in production as this would make importing it into Canada even more difficult, but it is styled after a Snub Nosed type Revolver. As for looking like and working like a real gun, the ROHM RG-89 .380 Caliber Blank Revolver looks and sounds as loud as a real gun, of course with the exception of the dangerous bullet coming out of the barrel!

Purchase from: The Replica Airguns Canada Store

View fullsize

Pros:

• German made Quality.

• All metal gun with reenforced steel in some areas.

• Front firing gun.

• Large caliber makes a bigger bang.

• Higher 6 shot capacity over RG-59.

• Chrome (Silver) finish is very nice.

• Also like the moulded grips on the Chrome version.

• Comes with Flare Adaptor & Cleaning Rods.

• Comes in a nice foam lined plastic hard shell case.

• Right now Rohm is the only blank gun brand we can get in Canada.

View fullsize

Cons:

•  Double Action trigger pull is a bit heavy.

• Have to make sure you only shot them where you will not get in trouble. Very loud!

• Expensive due to them being harder to get and in high demand in Canada.

View fullsize

Comments:
I think the ROHM RG-89 .380 Caliber Blank Revolver especially in the Chrome (Nickel) version is one of the nicest looking ROHM Blank guns we stock. The additional size over say a ROHM RG-59 makes it feel a lot more beefy in the hand, you also get the extra 6th 9mm / .380 caliber blank with the larger cylinder of the ROHM RG-89 .380 Caliber Blank Revolver. Anther bonus with the Chrome or Nickel version is that you get moulded grips that again I feel looks and fells better in the hand. Along with the ROHM RG-88, the ROHM RG-89 .380 Caliber Blank Revolver is one of my Top ROHM Picks!

My Full Video Review for the ROHM RG-89 .380 Caliber Blank Revolver:

• But the ROHM RG-89 .380 Caliber Blank Revolver in Canada

• Buy ROHM Blank Guns in Canada

In this December Update Video I wish everyone a Merry Christmas and Happy New Year. If you have other beliefs and perhaps don’t celebrate Christmas in the traditional Canadian fashion then I wish you a Happy Holiday!

I received a number of products lately and really don’t have time to do full reviews of them as the Holliday season is on us which is going to limit how many videos I can pump out over the next couple of weeks so hopefully this Update video will keep everyone excited about the future Replace Airgun Videos.

Here are the items I talk about in this December 2018 Update Video:

View fullsize

Sig Sauer ASP M17 CO2 Blowback Pellet Pistol

• Buy Sig Sauer Airguns in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

Sig Sauer Fake Suppressor for P226 ASP Pellet Pistol

• Buy in Canada

• Buy in the US

View fullsize

Umarex Steel Strike Full Auto BB Rifle

• Buy in Canada

• Buy in the US

View fullsize

ROHM RG-89 .380 Caliber Blank Revolver

• Buy in Canada

• Buy in the US

View fullsize

Umarex Legends WildCard Airsoft SAA Revolver

• Buy in Canada

• Buy in the US

View fullsize

Umarex WW2 Limited Edition P08 CO2 Blowback BB Pistol

• Buy in Canada

• Buy in the US

View fullsize

Umarex WW2 Limited Edition M712 Full Auto CO2 Blowback BB Pistol

• Buy in Canada

• Buy in the US

View fullsize

Webley Mark VI CO2 Pellet Revolver

• Buy in Canada

• Buy in the US

View fullsize

John Wayne Signature SAA Revolver Solid Maple Wood Case

• Buy in Canada

• Buy in the US

I have some harder to get here in Canada Blank Guns that I am selling from my personal collection by way off Silent Auction. These Blank Guns are more for the Canadian collector and perhaps not so much for the first time buyer. I would recommend for the first time Blank Gun buyer that you checkout our selection off brand new ROHM Blank Guns that we sell in our Canada Replica Airguns Store so check those ROHM Blank Guns out as they are excellent German made Blank Guns in a variety of styles.

Getting back to the Blank Guns in my personal collection. They are all previously owned, most only test fired once for review. Below is a listing of the Blank Guns I am offering in this Silent Auction with what I feel is there approximate value:

View fullsize

• ARAL 622K Black 9mm PAK Front Firing New (Just fired once for review video): $299

View fullsize

• EKOL Aras Compact 9mm PAK Gloss Black Front Firing (New Condition): Missing magazine, should be able to buy and import magazine into Canada pretty easy. Takes the same magazine as most of the EKOL Blank Guns (Jackal, Dicle, ASI, Firat) $299

View fullsize

• Bruni Mod. 92 8mm PAK Black Top Venting in working condition: A bit weathered but still looks good and super solid gun. Comes in a real Beretta case. $299

View fullsize

• EKOL Arda 8mm PAK Gloss Back (Just fired once for review video): $199

Here is how the silent action system works… First of all I will only be shipping these guns within Canada to a Canadian addresses and all funds are in Canadian Funds. You will need to email me and let me know which Blank Gun or Blank Guns you are interested in bidding on and let me know what your best price is. In approximately a weeks time when I feel enough offers have come in, I will then contact the winning bidder and give them 24 hours to pay up. If they do not pay me the amount they offered within the 24 hours I will then move on to the next highest bidder.

If you are bidding on more than one gun then I will take this into consideration since collecting money and shipping product to one buyer is easier than multiple buyers so this will help you with your offer.

I also will be charging $20 for shipping per gun, if you are buying multiple guns then I will discount the shipping a little bit so I will not charge you $20 per gun.

Email me here:

mike(at)replicaairguns(dot)com

View fullsize

Some more stuff came in and I just had to show it off before moving on with the reviews. I know you're going to like it so here we go again...

View fullsize

First off the super anticipate Umarex Glock 19 CO2 BB Pistol has arrived and is now available in our Canada and US online Replica Airgun Stores so get yours while we still have them, if we still have them? No this version is not a blowback or even working slide version and yes it has the dreaded stick mag! That all said the Umarex Glock 19 CO2 BB Pistol feels really solid and well made and heck it's the first licensed Airgun Glock ever so it's a good start. Umarex has said that more elaborate blowback versions will be coming out down the road. There are full blowback Airsoft version licensed by Umarex but the FPS is too slow right now for us to import them into Canada, hopefully there is a fix for this at some point...

I have been waiting at least three months now for my AW Custom AG-HX2003 Double Stack Tactical 1911 Full Blowback CO2 BB Pistol to show up. Canada Customs got their hands on it and felt it needed to be processed for three months before delivering it to me. at least I did end up getting it without a fight!

View fullsize

AW Custom is primarily an Airsoft gun manufacturer but is moving into the 4.5mm Steel BB market and has a few 4.5mm Steel BB offerings which have interchangeable parts with their Airsoft guns if you need them. I will making a Table Top and Field Test Sooting Video for the AW Custom AG-HX2003 Double Stack Tactical 1911 Full Blowback CO2 BB Pistol, my list is getting pretty huge now but I am excited I have all these new products to review for everyone!

View fullsize

Last on my Update list is a rather pricey one but not something I have ever revised on this channel, It's the Umarex T4E HK416 .43 caliber Paintball M4/AR Rifle made specifically for m military and police training. This gun is super realistic with similar working parts to its real steel counterpart. Check the Umarex T4E HK416 .43 caliber Paintball M4/AR Rifle in our Canada and US Online Stores.

I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.

More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.

In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.

View fullsize

I think this may be a record for me, I mean following up a Table Top Review with a Field Test Shooting video within a day of each other! If you have not already watched my Table Top Review for the ROHM RG-46 22 Caliber Blank Revolver than make sure to do give it a look.

Shooting Field Tests of blank guns are really pretty simple. There is no accuracy or chronograph test to consider since there is no bullet coming out of the barrel, kind of makes it hard in this case. This may even seem a little bit weird since what is there left to actually test? I guess as long as I pull the trigger and it goes "BANG" each time then we have ourselves a winner on our hands :)

View fullsize

I can attest that the ROHM RG-46 22 Caliber Blank Revolver was a clear winner on this day. I loaded 7 rounds into the 7 shot cylinder and then pulled the trigger 9 times. And as you can imagine the first 7 trigger pulls went "BANG" each pull while the last 2 trigger pulls went click-click as expected...

All fun aside the ROHM RG-46 22 Caliber Blank Revolver Field is a really nice quality blank revolver great for many situations like; Gun training, animal training, scaring off pests, stage or movie props or just collecting for fun.

View fullsize

Type: Blank Revolver.
Manufacturer: ROHM (RÖHM).
Model: RG-49
Materials: Mostly Metal.
Weight: 439 grams 15.5 ounces.
Barrel: Removable - Front firing designed for flares.
Propulsion: Gun powder.
Action: Single & double action.
Ammunition Type: .22 caliber crimped.
Ammunition Capacity: 7 rounds.
FPS: N/A.

Trigger Pull: The trigger pull on the ROHM RG-46 22 Caliber Blank Revolver in single action is very light having virtually no take up at all. The double action trigger pull is much heavier with a smooth release. Mechanically the trigger feels really good.

View fullsize

Accuracy: NA.
Build Quality: The overall build quality for the ROHM RG-46 22 Caliber Blank Revolver is excellent, being German made its built to last and the fit and finish is typical German quality. There are steel parts where they need to be like in the barrel, pins, screws and reenforcing parts, the rest of the gun is generally made out of a zinc metal with only the simulated wood grips being made out of plastic.

View fullsize

Realism: The ROHM RG-46 22 Caliber Blank Revolver is not an exact replica of any given gun in production as this would make importing it into Canada even more difficult, but it is styled after a Smith & Wesson Snub Nosed Revolver. As for looking like and working like a real gun, the ROHM RG-46 22 Caliber Blank Revolver looks and sounds like a real gun, with the exception of the dangerous bullet coming out of the barrel!
Purchase from: The Replica Airguns Canada Store.

View fullsize

Pros:

• German made Quality.

• All metal gun with reenforced steel in some areas.

• Front firing and capable of shooting flares.

• .22 caliber blanks are less expensive and not as loud to use.

• Comes with removable Flare adaptor & Cleaning rod.

• Super compact and portable.

• Highest capacity ROHM Revolver with 7 round cylinder.

View fullsize

Cons:

• Smaller caliber blanks are not as loud or powerful.

• Can be considered a bit expensive due to blank guns in general being hard to get and in high demand in Canada.

Comments:
The main purpose of the ROHM RG-46 22 Caliber Blank Revolver is to make noise along with the added ability to shoot flares and that's exactly what you're getting here. The ROHM RG-46 22 Caliber Blank Revolver may not be as elegant as the other ROHM revolvers with their nicer barrels but with the ROHM RG-46 22 Caliber Blank Revolver you are getting the most compact 7 round shooter and at a bit lower price than the other full sized ROHM Blank Guns. 

My Vimeo Full Video Review for the ROHM RG-46 22 Caliber Blank Revolver:

View fullsize

It was fun to shoot the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol for a change but really it was a lot like shooting one of my BB and Airsoft pistols, except in this case I was shooting .43 caliber rubber balls. I decided to not use paintballs inside my nice new Sea Can Indoor Airguns Shooting Range to keep things clean :)

View fullsize

First, I put three rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the lighter paintballs. Using a brand new CO2, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol average 316 FPS which was high than the claimed 290 FPS!

View fullsize

Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. I was not expecting anything close to what I would get with a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly it is much less noticeable.

View fullsize

I know some of you are going to ask about using the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is persistent on hurting you. There is simply not enough stoping power here. Will it "sting like a bitch" if you get shot up close with one of these Umarex Walther PPQ M2 .43 Cal. Paintball Pistol? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.

View fullsize

As a paintball pistol, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is about the best I have seen in terms of replica paintball guns. It is as good as they come for realism, even better than many BB and Airsoft guns and in terms of performance it did not let me down either.

Buy in the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

Type: Paintball Gun.
Manufacturer: Umarex - T4E.
Model: Walther PPQ M2.
Materials: Metal & Polymer.
Weight: 848 grams (1.87 pounds).
Barrel: Smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi-Automatic with blowback action.
Ammo Type: .43 Caliber Paintball or Rubber Ball.
Ammo Capacity: 9 Rounds.
FPS: 290.

View fullsize

Trigger Pull: The trigger pull on Umarex Walther PPQ M2 .43 Cal. Paintball Pistol feels a lot like a double action trigger, internally it may be striker fired so expect a bit of a longer trigger pull with a fairly long reset and a medium strength trigger weight. There is also a working trigger safety which works well.

View fullsize

Accuracy: So far I have not had the opportunity to test the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol out so stay posted for a future Field Test Shooting video where I will see what kind of fps and accuracy we can expect form the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. So far all I have to go on is what I have seen in some other video reviews I have watched, for the most part the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol performed well.

View fullsize

Build Quality: The build quality of the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol a nice near 2 pounds (1.87 pounds) of weight with the magazine in which makes the Paintball version a little heavier than the real still version (1.53 pounds) but once the real steal version is loaded with a full mag this may even out a bit. The Walther PPQ M2 does have a polymer frame but again this is normal with todays modern guns and helps keep the weigth down. Fit and finish is also excellent.

View fullsize

Realism: The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is a near perfect replica of the real steel Walther PPQ M2, form the fully licensed markings to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version I doubt you could tell them apart? You will find that the slide cycle distance is a bit shorter than it shoudl be meaning that when the side catch is engaged the slide does not go as far back as it should. Filed stopping the Walther PPQ M2 .43 Cal. Paintball Pistol may requires some tools.

Purchase it from: The Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

Pros:

• Really great weight and solid feeling gun.

• Full Metal slide that locks back on the last shot.

• All metal heavy full size drop out magazine adds some additional weigth to the gun.

• Very Accurate Walther PPQ replica, almost indistinguishable from the real still version.

• Everything works pretty much like the real gun so a great training tool.

• Adjustable yellow dot sights.

• Working trigger safety.

• Fit and finish is excellent.

• Magazine spring release really shoots the magazine out.

• Love the .43 caliber barrel opening, adds to realism.

View fullsize

Cons:

• Trigger pull seems a bit long as it shoots like a double action trigger, may be striker fired internally?

• Magazine only holds 9 rounds, so you are going to need extras.

• Blowback action is not full blowback, more like a typical BB airgun.

View fullsize

Comments:

I'm really glad to see another Replica Paintball Pistol available in Canada, especially such a well made and realistic version. The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol looks to be perhaps the best to date .43 caliber Paintball gun on the market and may even prove to be an option for non-lethal personal defense when using rubber balls with it. Not that I would trust my life with it but it sure looks the part and I am sure most people would not want to be on the receiving end of 9 rounds coming at you. As a training tool and Paintball gun the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol offers superb realism for this purpose. I am looking forward to testing mine out shortly :)

Buy in the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

This was the first time shooting a blank gun in the new Sea Can and I can tell you it was pretty loud inside but of course I was wearing ear protection! In this Blank Gun Shooting video I test out the ARAL Model 1453 and 622K 9mm PAK Blank Guns and put 3 rounds through each of them.

Not everything went as planned. First off my high speed slow motion camera decided to not work :( and secondly I had some technical issues with both guns, well sort of...

View fullsize

Since the manual for the ARAL Model 1453 does not cover what I believed to be a safety on the back of the slide, I had no idea and was surprised to find out that rather than a safety, this selector switch is actually a semi and full auto selector which is kind cool but not so much when you're not expecting your blank gun to be shooting in semi auto :) Keep in mind this semi-full auto switch is only on the all black ARAL Model 1453 and not the two tone version.

Moving on to the ARAL Model 622K 9mm PAK Blank, I have a feeling that perhaps a different brand of ammo may have worked better in it. The 9mm PAK Blanks I used worked OK but I did get a failure to eject and the last round seemed to also not eject properly probably because there was no bullet in the mag too help direct it out of the breach area.

View fullsize

What do yo know, a new Blank Gun Review! It's been a while since I actually saw some new Blank Guns other than our ROHM selection that made it past our wonderful Canada Customs.

So how do the ARAL Model 1453 and ARAL 622K compare to our ROHM Blank Guns? Well to be honest they don't. Our ROHM Blank Guns are much better quality and made in Germany rather than Turkey.

But still it's nice to hold a new Blank Gun in my hands even if it's not the best quality. The two ARAL blank guns I take a look at in this Table Top Video Review are the ARAL Model 1453 and ARAL 622K 9mm PAK versions. Both are front venting and both have double stack 14 round magazines. They also have threaded inner barrels however no flare adaptor came with either on of them and I only got an included manual with the ARAL Model 1453.

View fullsize

In terms of what exactly real steel guns do they look like or resemble? The ARAL Model 1453 is kind of like a big chunky and somewhat ugly looking Glock. I have nick named mine the RoboGlock :)

The ARAL 622K resembles a CZ 75 but it's a fair bit smaller in size and much shorter. The finish on my ARAL 622K is really bad, it looks like someone took a can of spray paint and painted it themselves. But still they are working blank guns, well let's hope so when I test them out in my upcoming Field Test Shooting video... Fingers crossed!

First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.

But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.

Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?

One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.

The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.

If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!

You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.

One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.

Why Are My Blanks Not Firing?

This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?

So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.

Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.

Why is the Trigger or Hammer Not Operating Properly?

I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.

Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.

One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.

Why does the Flame Come out the Top of My Blank Gun and Not the Front?

If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.

Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?

I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!

In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.

Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.

This is not to say that a “Real Gun” is not as good as an Airgun or better in other ways, in this video I’m just pointing out how an Airgun in some cases can actually be better suited than a Real Gun.

Availability: What I mean by this, is that in many countries Real Guns can be very hard to acquire and often require safety course and applications before one can purchase a Real Gun. I have no problem with this but it is a reality that must be considered. Having an Airgun versus not having a gun at all makes it a better option for people that live in countries that have strict gun laws. Here in Canada we are allowed Real Guns, even pistols but we do have restriction on our pistols and so I can only get certain guns in an Airgun version. As a collector this is better than not having the gun at all.

Price to Buy: Generally speaking you can pickup an enter level Airgun for much less money than a real gun.

Cost to Shoot: Real gun ammo prices have been steadily increasing to the point that a day out shooting can cost several hundred dollars just on the ammunition alone.

Comparison of Price:

• 50 rounds of 9mm ammo will cost around $18.00

• 6000 rounds of 4.5mm Steel BB will cost about $18.00

• CO2 is a bit less than $1 per 12 gram Cylinder which can yield up to 100 shots each.

• To shoot 100 rounds of 9mm will cost close to $40 versus 100 shots of 4.5mm steel BB at around $1.

• For this reason alone an Airgun can make a lot of sense even for Real Gun owners looking to get more cost effective practice time.

Access to Shooting Locations: Depending on where you live you will have to consider your local laws and where you are allowed to shoot both types of guns but typically you can shoot an Airgun safely just about anywhere as long as you implement some backstop safety precautions. Here in Canada we can only shoot a pistol at designated gun ranges, where as Airguns have a lot more allowances to shot them as long as you are not braking any city bylaws.

Training Guns: Even if you plan to eventually step up to a Real Gun at some point, an airgun is a great option to first learn proper gun handling skills since if you where to make a mistake, the consequences are much less severe. Airguns are also a lot less intimidating than a real gun since they are much quieter and have less recoil, you don’t even need to wear ear protection with most Airguns which means an instructor can communicate to his pupil on the range a lot easier.

Prop Guns: Since Replica Airguns look so much like real guns these day, they can often be used as a safer substitute for use in Movie, TV or other Photo and Video productions. Using a Real Gun on set generally requires a certified “Gun Wrangler” be on hand as Real Guns must be transported, stored and handled using very strict regulations. Airguns generally do not need to follow the same rigid regulations that Real Guns are bound to.

Tactical Training with Live Targets: Obviously shooting a real gun at a live target would not fair well for anyone involved, so that is completely out of the question. Airsoft Airguns are however perfect for Tactical Training and other weapons based simulations. All that is required for safety when using Airsoft guns is the use of eye protection and generally some heavy clothing.

I am sure there are some more areas in which Airguns may have the advantage over a Real Gun but these are the main ones that I could think of.

Make sure to watch my Table Top Review for all the Features and Specifications for the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit.

In this Field Test Shooting Video Review I compare using a standard 12 gram CO2 versus my ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit with HPA (High Pressure Air).

To make this as comparable a test as possible I used two KWC/Gletcher Makarov Full Blowback Pistols each with their own separate magazine, again one with a 12 gram  CO2 and one using the ANT system.

HPA or High Presure Air is not effected by cold weather which makes this setup ideal for shooting in cold situations since fps is not effected at all. As CO2 requires heat to expand, the colder the outside temperature the less amount of expansion you get from the CO2 whihc results in less power, this is really noticeable on your follow-up magazines as the CO2, magazine and even the gun will have started to cool down from the CO2 exposure.

The ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit even when using large 20 ounce CO2 tanks will help with the cool down effect since the large CO2 tanks will take much longer to cool down and even freeze up as compared to the smaller 12 gram CO2 which can get frosty even after the first magazine.

I did notice in this Field Test Shooting Review that the CO2 did pretty good as it was my first magazine and the temperature was not all that cold out. I can say the HPA System was shooting much harder, after making this video I popped off another couple magazine with each gun shooting out to at least 100 feet and the ANT FIRE HPA setup was really throwing the 4.5mm Steel BB's out there quickly. As expected the 12 gram CO2 mags really started to trail off especially on the third magazine of shots.

All in all, the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit will not only bring your cost per shot down significantly but it allows you to keep shooting with no down time waiting for your gun to warm back up and the ability to use HPA (High Pressure Air) means you will get even more fps performance out of your air guns but also much more consistent shot performance all day long!

I reviewed the Original ANT (Advanced Novelty Tech) CO2 HPA Conversion Kit last year and did both a Table Top Review and Field Test Shooting Review, so make sure to check out my video reviews for the Original ANT Advanced Novelty Tech CO2 HPA Conversion Kit.

Well ANT (Advanced Novelty Tech) made an update model that supports a bunch more guns, that's a good thing of course. This new model is called the "FIRE" and it supports the following guns. I did find however that ANT list that the Gletcher NGT and Webley Mark VI Revolvers where supported by the FIRE but my findings indicated the CO2 screw on both these guns had a smaller diameter so they where not compatible. Other than that small discrepancy most of the other guns on their list should work just fine.

What exactly is the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit?

The Advanced Novelty Tech FIRE CO2/HPA Conversion Kit is a remote line adapter for Airsoft, BB, and pellet guns. Compatible with over 60 guns, it is easy to install and converts a compatible gun for use with a Paintball remote line and CO2 or HPA tank. Eliminating the need for disposable CO2 cartridges, while still being interchangeable with disposable CO2 cartridges, it delivers a longer, more powerful, and more consistent shooting experience between refills.

So what is the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit going to do for you?

• Eliminate the need for the more expensive disposable 12 gram CO2 cartridges.

• Use interchangeably with disposable 12 gram CO2 cartridges.

• Use in conjunction with a Paintball remote line with standard quick disconnect fittings and a CO2 or HPA tank. (recommended use up to 1000 psi)

• Shoot thousands of rounds before needing to refill your CO2.

• Fits compatible Airsoft, BB, and pellet gun CO2 pistols.

• Easy drop-in installation.

• Overall cost savings.

• More consistent FPS especially when shooting fast or in full auto.

• Longer play time :)

I will be doing a Field Test Shooting Review for the ANT Advanced Novelty Tech FIRE CO2 HPA Conversion Kit but based on my experience with the Original ANT CO2 HPA Conversion Kit I expect it to work as advertised.

It has been a while since I picked out some of my favorite guns, after all my favorite gun picks change on a daily basis since there are so many awesome guns out there to pick from.

This Vimeo video is a little different since I pick out my favorites from a bunch of mostly replica gun categories including Steel BB, Pellet, Airsoft, Revolvers and Blank Pistols.

You may notice most of my picks happen to be blowback guns but to me airguns are all about being as realistic as possible and having blowback operation to me help to simulate the realism that much more. The exception in this video is in the pellet gun category since I decided on a pellet gun that was more about function and purpose over being any type of real replica.

Hopefully you take the time to watch my entire Vimeo video since I also bring out some close runner ups but here is a list of my top picks on this day, tomorrow it could be a completely different list of guns ;) 

• Steel BB - Umarex/KWC Smith & Wesson M&P 40 CO2 Blowback BB Pistol

• Pellet - Webley & Scott Tempest .22 Caliber Pellet (Spring Piston)

• Airsoft - KJWorks KP-11 1911 Hi-Capa 1911 CO2 Blowback Airsoft Pistol

• Blank - ROHM RG-88 9mm P.A.K. Blank Pistol

• Revolver - Dan Wesson 715 Revolver (BB, Airsoft, Pellet Versions)

Buy Umarex/KWC Smith & Wesson M&P 40 CO2 Blowback BB Pistol in Canada

BuyUmarex/KWC Smith & Wesson M&P 40 CO2 Blowback BB Pistol in the US

BuyWebley & Scott Tempest .22 Caliber Pellet (Spring Piston) in Canada

Buy KJWorks KP-11 1911 Hi-Capa 1911 CO2 Blowback Airsoft Pistol in Canada

Buy ROHM RG-88 9mm P.A.K. Blank Pistol in Canada