Entries in Single Shot,Accessory

Safe Air and Blank Gun Storage Unit On a Budget

No Comments

I ran out of room for all my air guns and blank guns in my gun locker a while ago and so I have been on the lookout for a safe way to keep my air and blank guns secured and out of reach.

I have two little kids and I do make a point to keep an unloaded air gun around for them to check out and get used to, (so it's not such a big deal down the road for them). I have started to at least make them aware of what guns are and not to handle guns unless an adult is around and says it's OK. I want them to know early on that guns can be very dangerous when used the wrong way. But thats' another article on it's own!

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I have been considering another gun locker or safe but they can be very expensive and are usually limited in size, especially if you're looking for an inexpensive one. In Canada, air guns and non-prohibited blank guns don't technically legally need to be locked in a gun safe or gun cabinet but personally I still feel the need to keep my air and blank guns locked up to some degree. So I thought, what about some sort of a lockable storage or utility cabinet?

I finally came across what I think is an excellent solution and it didn't cost me an arm and a leg! I went with an upright utility cabinet from Black & Decker (SpaceAir Collection). Mine is 70 inches tall, 15 inches deep, and 27 inches wide. It's made out of sturdy plastic and most importantly it's lockable!

I went with a pretty large utility cabinet as I have lots of air and blank guns but if you have a small to medium air and blank gun collection, you could always get the half size shorter version of this type of unit.

My Vimeo Video showing my Air and Blank Gun Storage solution:

Categories: Accessory, Gun Safety, Replica Airguns News, YouTube Video Tags:

Webley Alecto - Zoraki HP-01 .177 & .22 Caliber PCP Air Pistol Review

9 Comments

Related Posts:

Type: Multi-pump Air Pistol.

Manufacturer: Webley - Zoraki ATAK Arms.

Model:Alecto -  HP-01

Materials: Polymer shell with metal internal parts.

Weight: 2.4 pounds.

Barrel: 7.2 inches, metal rifled.

Propulsion: MSP Multi-stroke pneumatic.

Action: Single shot.

Ammunition Type: .177 & .22 caliber pellets.

Ammunition Capacity: 1 pellet.

FPS: 495+.

Trigger Pull: You simply can not get a better trigger. You can adjust it left and right and forwards and backwards. You can also adjust the tension from .9 lbs to 4 lbs and the break point is smooth as butter.

Accuracy: Awesome, I got about a 1 inch group from a free standing position 20 feet away.

Build Quality: Build quality is excellent, it does have an external outer plastic shell but it is very solid and made of what seems to be high quality weapons grade polymer. All the internal mechanical parts are made out of metal.

Realism: This is not a replica air gun but it does resemble the Desert Eagle in shape and size.

Purchased From: the Replica Airguns Store.

Pros:

  • Very accurate for a pistol.

  • Only a few pumps generate a lot of power.

  • Fully adjustable trigger and grips.

  • Fully adjustable sites, including a rotating front site for quick adjust near and far shooting.

  • Great safety design with one finger operation.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

Cons:

  • If you're left handed you have to buy the extra left hand grip separately.

  • Comes with the pressure release valve adjusted a bit too lean. (seems to let pressure out even with only two pumps)

  • May be a bit to large for small handed shooters.

Comments:

I originally got this target air pistol mainly to test it out and do a review for the website, thinking I was going to send it back at the end. After playing around with it for a while, I have decided I simply can not part with it. The Webley Alecto is just to addictive to shoot and has such great power and accuracy that you kind of forget it's not an action shooter. you get lost in literally blasting away anything you point it at.

My table top Vimeo Video Review of the Webley Alecto Target Pistol:

Categories: .22 cal, 4.5mm / .177 cal, Multi-pump, Pellet, Pistol, Review, Single Shot Tags: Alecto, Webley, Zoraki

Webley Alecto .177 and .22 Caliber Multi-Stroke Pneumatic Target Pistol

1 Comment

Related Posts:

The Webley Alecto isn't exactly a "Replica Airgun" but it's really addictive to shoot and OK maybe it looks just a bit like the Desert Eagle? Unlike most BB guns, the Webley Alecto is all about accuracy and consistency. I found myself shooting at all kinds of targets just to see if I could hit them and this gun is simply amazing. It is essentially a PCP compressed air gun that has a three stage pump, you can pump it up to three times to get the maximum feet per second.

I found the one I have (Canadian Version with detuned pressure release valve) had little to no fps gain pumping it the third time because to be imported into Canada it must shoot under 500 fps. The valve can be adjusted internally but you risk higher then 500 fps shots which would make it a Restricted Controlled Firearm in Canada.

One of the most amazing attributes about this compressed air gun is the trigger, it's fully adjustable and smooth as butter. Another nice attention to detail is the included hard shell case and factory quality control test target.

The gun is made in Turkey for Webley by Zoraki and is the HP-01. Unlike the Zoraki version (.177 cal. only), with the Webley Alecto, you have the choice of either a .177 or .22 caliber. I went for the .22 caliber model and mine will for sure get a Red Dot Scope mounted on it one of these days :)

Categories: .22 cal, 4.5mm / .177 cal, Multi-pump, Pellet, Pistol, Single Shot Tags: Alecto, Webley, Zoraki

Umarex CX4 Storm gets some new toys - 3x9x40 Scope and Foregrip

2 Comments

Related Posts:

My scope mounting hardware came in today and I got right to work adding my new Aim 3x9x40 Rubber Scope and Foregrip to it. I wasn't planning on putting on the Foregrip, it just kind of happened and it looks good, so it may just stay on the CX4?

I ordered a Picitinny/Weaver Deluxe Riser Mount because I wasn't sure if the scope would clear the built in sites and I was thinking I wanted to mount the 3x9x40 Scope toward the rear but as it happened my high rise ring mounts where already the perfect hight and the Picitinny/Weaver Deluxe Riser Mount I ordered wasn't required!

Guess I'll have to shelf the Riser Mount for another project, I'm sure one day it will come in handy.

Some more pictures of the new setup:

Categories: 4.5mm / .177 cal, Accessory, Blowback, Pellet, Rifle, Scope, Semi Auto Tags: Beretta, CX4 Storm, Umarex

A few new Accessories - Red Dot - Scope - Foregrip

3 Comments

I have been wanting to get a suitable scope for my Umarex CX4 Storm for a while but have been busy with the Holliday Season, today I made it out to Panther Paintball, a local paint ball store in my area to see what they had in stock. Sometimes I find paintball stores have a better air gun accessory selection then even many full fledged sporting goods stores that sell guns?

I was in luck because they had some good deals going on, one of which was a nice 3x9x40 Rubber Coated Scope made by AIM SPORT INC.

The only problem I had is that it did not have the right mounts for my CX4, it came with mounts for an M16 Carry Handle instead. So I added a Deluxe Riser Mount and some High Profile Picitinny/Weaver 30MM Rings - Problem solved!

I also have another rifle coming next week that I want to add a Foregrip and Red Dot Scope to, again Panther Paintbally had a 1x42 Red Dot Scope made by AIM SPORT INC. that was on sale and just what I was looking for.

Lastly, I found a Foregrip much like the one I have on my Steel Storm but without the Tactical Flashlight built in. I didn't really need the light on this new gun anyways.

Now I'm set for next week when I hope to get all the parts I need and of course my new rifle...

Categories: Accessory, Scope Tags: CX4 Storm

Steel Storm Bulk Air-CO2 Adaptor

1 Comment

I just noticed that you can get Bulk Air-CO2 Adaptors on Amazon via a company called "Air Venturi". They have them for the Steel Storm, the Drozd and the Blackbird. The Blackbird one actually doubles as a stock mount for your CO2 or Bulk Air Tank.

 

Buy this gun in Canada   -   Buy this gun in the US

Categories: 4.5mm / .177 cal, Accessory, BB, Bulk Air, CO2, Full Auto, Semi Auto Tags: Baikal, Bulk Air, Drozd, Drozd-Blackbird, Steel Storm