My last Interview for SHOT Show 2017 in Las Vegas, well at least till next year and I am already looking forward to going back and doing it all over again :) I met with Boris Shekhman from Gletcher and Boris showed me several of their Gletcher Airguns along with a new accessory introduced this year.

Probably the highlight at the Gletcher booth was the Gletcher M1944 Mosin Nagant CO2 4.5mm Steel BB Bolt Action full stock air rifle! I already reviewed the Gletcher M1891 short stock version but have been really looking forward to seeing the Gletcher M1944 Mosin Nagant in person. Interestingly, Boris was asked by the SHOT Show staff to remove the Gletcher M1944 Mosin Nagant from his display because the real metal swing out bayonet was a concern for them. Boris was kind enough to bring out the Gletcher M1944 for me to see and video for everyone. The full stock however is not real wood but you need to look super close to figure this out as the reproduction is incredible.

We took a look at another Gletcher Airgun I have reviewed in the past, the Gletcher NGT and Gletcher NGT R which are very acurate Steel BB and Pellet shooting reproductions of the Belgian Nagant Revolver. Both these BB and Pellet shooting NGT's are getting a slight make-over with the addition of a safety on them, the real steel versions do not have a safety but some dealers felt it was a concern so Gletcher moving forward will be including a safety on all new NGT's. So if you want a more original Gletcher NGT Nagant Revolver then hurry up and pickup the older non-safety versions while they are still available!

Last on the list of new products from Gletcher are some really great looking leather holsters that not only work for several Gletcher airgun products but can also be used for the same real steel versions. Some of the pistols these new leather holsters will accommodate are the Gletcher TT Tokarev, 1911, Grach, PM 1951 Makarov, and the Stechkin.

Next up from SHOT Show 2017 in Las vegas, I bring you my Umarex Interview with Bradley Burgin! Bradley showcases two new pistol from Umarex Airguns. First we take a look at the Umarex SA10 CO2 Blowback Pellet and BB Pistol. The Umarex SA10 has a unique full size drop our metal magazine that not only holds the CO2 but also houses 4 8 shot rotary magazines that can be pre loaded and then hot swapped as required. Each 8 shot rotary magazine can be loaded with either 4.5mm Steel BB's or .177 caliber pellets. The Umarex SA10 comes in at a hefty 2 pounds and can shoot up to 426 fps. The barrel is also threaded for attaching an optional mock silencer.

Next up Bradley showed me the ultra realistic and fully licensed Beretta APX which is a Blowback CO2 BB Pistol that like its real steel big brother has a locking metal slide and polymer frame. The Umarex Beretta APX has a 19 round stick magazine and shoots 4.5mm steel BB's at 400 fps.

Last but not least and perhaps the most exciting product from Umarex for me was the Umarex Legends MP. The Legends MP is a replica of the German MP40 submachine gun and even has semi and full auto selectability! The Umarex Legends MP is a mostly metal rifle and comes in at 7.7 pounds. The full size magazine holds two CO2 cartridges along with 60 4.5mm steel BB's for an almost endless supply of ammo :) The Umarex Legends MP like the real German MP40 has a metal folding stock and propels steel BB's at 400 fps.

This Vimeo Unboxing Preview Video focuses on two AR M4 styled AEG Airsoft Rifles. The G&G CM16 Rifles are all pretty much the same other than the barrel lengths and come in the following versions, the CM16 SRS, CM16 SRL and CM16 SRXL. I also showcase the Umarex HK M27 which is distributed by Umarex but made by VFC which is knwo for their high quality products. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG AR M4 rifle.

G&G CM16 SRS Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 4.97 Pounds

• Barrel:  8.1 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420 fps

Buy G&G CM16 SRL Black AEG Airsoft Rifle in Canada

G&G CM16 SRL Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 5.1 Pounds

• Barrel:  10.2 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420+ fps

Buy G&G CM16 SRL Black AEG Airsoft Rifle in Canada

G&G CM16 SRXL Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: G&G Armament

• Model: CM16 SRS

• Materials: Metal and Polymer Construction

• Weight: 5.24 Pounds

• Barrel:  13 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto, 3-Round Burst Modes

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 300 rounds

• FPS: 420+ fps

Buy G&G CM16 SRXL Black AEG Airsoft Rifle in Canada

Umarex H&K M27 Black AEG Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: Umarex VFC

• Model: H&K M27

• Materials: Metal and Polymer Construction

• Weight: 6.7 Pounds

• Barrel:  14.2 inches

• Propulsion: Electric AEG

• Action:  Semi, Full Auto

• Ammunition Type: 6mm Plastic Airsoft BBs

• Ammunition Capacity: 320 rounds

• FPS: 400 fps

Buy Umarex H&K M27 Black AEG Airsoft Rifle In Canada

Buy Umarex H&K M27 Black AEG Airsoft Rifle in the US

This Unboxing Preview Video focuses on three Bullpup designed AEG Airsoft Rifles. The two Steyr Aug Bullpups are distributed through ASG while the IWI Tavor 21 is distributed via Umarex. In this Unboxing Preveiw video I take each gun out of the box and go over some basic specification and show you around each AEG Bullpup Rifle a little bit. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG rifle.

Here are some of the basic Specifications for each AEG Airsoft Rifle.

AEG Steyr AUG A3 MP AEG Aisoft Bullpup Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: ASG

• Model: Steyr AUG A3 MP

• Materials: Metal and Polymer

• Weight: 3.85 kg (8.5 pounds) 

• Barrel: 21.2 mm (0.83 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Plastic Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 394

Buy AEG Steyr AUG A3 MP AEG Airsoft Bullpup Rifle in Canada

Buy AEG Steyr AUG A3 MP AEG Airsoft Bullpup Rifle in the US

ASG Steyr AUG A2 Tan AEG Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: ASG

• Model: Steyr AUG

• Materials: Polymer with Metal Internals

• Weight: 3.39 kg (7.5 pounds)

• Length: 805 mm (31.7 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 394

Buy ASG Steyr AUG A2 Tan AEG Airsoft Bullpup Rifle in Canada

Umarex IWI Elite Tavor 21 Airsoft AEG Bullpup Rifle

• Type: Airsoft Bullpup Rifle

• Manufacturer: Umarex

• Model: Steyr AUG

• Materials: Polymer with Metal Internals

• Weight: 3.5 kg (7.71 pounds)

• Length: 755 mm (29.7 inches)

• Power Source: Electric AEG

• Action: Semi & Full Automatic

• Ammo Type: 6mm Airsoft BBs

• Ammo Capacity: 300 rounds

• FPS: 395

It's been a great year for Replica Airguns and I wanted to share with everyone some of my favorites that I reviewed this year. In this Vimeo Video I show some of my top Replica Airgun picks for 2016 and talk a little bit about each one and what I like about it.

Here is a list of the Replica Airguns in this lineup:

• ASG Dan Wesson 715 CO2 Revolver - Comes in 4.5mm Steel BB, 6mm Plastic Airsoft & .177 Pellet.

• Umarex Colt Combat Vet CO2 Blowback 1911 - 4.5mm Steel BB.

• Sig Sauer MPX ASP CO2 Rifle - .177 Pellet.

• Sig Sauer ASP P226 CO2 Blowback Pistol - .177 Pellets.

• Air Venturi ISSC M22 CO2 Blowback Pistol - 4.5mm Steel BB.

• KJWorks KC-02 V2 Ruger 10/22 GBB Rifle - 6mm Plastic Airsoft.

• Umarex S&W M&P40 CO2 Blowback Pistol - 4.5mm Steel BB.

One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”

I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…

In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there

First let’s get the super obvious stuff out of the way! 

• Did you put a new CO2 cartridge in it and is it pierced all the way?

• Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?

• Is the safety off?

• If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?

CO2 Related Problems:

Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.

There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.

CO2 Valve Related Problems:

Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?

One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.

If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine  take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!

BB’s getting Stuck in the Blowback Gas Tube:

I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.

BB’s Rolling Out of the Barrel of Your CO2 Airgun:

This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)

A Little Maintenance Can Go a Long Way!

Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.

What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?

There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.

First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.

But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.

Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?

One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.

The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.

If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!

You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.

One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.

Why Are My Blanks Not Firing?

This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?

So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.

Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.

Why is the Trigger or Hammer Not Operating Properly?

I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.

Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.

One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.

Why does the Flame Come out the Top of My Blank Gun and Not the Front?

If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.

Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?

I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!

In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.

Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.

Power Sources Covered in this review: CO2 - Green Gas / Propane - Spring - AEG / AEP (Automatic Electric Gun - Airsoft Electric Pistol)

Pro’s:

• CO2 Airsoft Guns allow for fast repeat shooting, great for action shooters, generally CO2 Airsoft Guns will have a little more power then Green Gas Airsoft Guns. There is no need to pump or cock your CO2 powered Airsoft gun in-between shots and a CO2 power source can allow for a very realistic action of the gun you are shooting. 

• Green Gas (Propane) Airsoft Guns operate much the same as CO2 Airsoft guns so they all make for great action shooters and the Green Gas powers the mechanical operation allowing for very realistic operation. Green Gas (Propane) Airsoft Guns can cost a little bit less to operate that a CO2 Airsoft Gun especially if you plan to use Propane as it can be cheaper to buy than the smaller 12 gram CO2 Cartridges.

• Spring Airsoft Guns are generally fairly basic and low cost so they are the usually the most affordable Airsoft guns to buy. There is no need to buy CO2 or Green Gas or even a Battery and Charger Setup so the cost to shoot Spring Airsoft Guns is only going to be subject to the Airsoft BB’s you plan on buying.

• AEG (Automatic Electric Guns) have the most consistent power as they use a spring internally that the electric motor draws back before each shot, the internal spring will essentially apply the same force to the Airsoft BB’s with each shot. AEG (Automatic Electric Guns) are a great option when you are wanting a Full Auto Airsoft gun since there is no cool down effect and as long as your batteries are charged and you have Airsoft BB’s in your magazine, the gun will simply keep shooting. AEG (Automatic Electric Guns) allow for the highest capacity magazines and often hold as many as 500 Airsoft BB’s in a single magazine. So if you’re looking for raw firepower an AEG or AEP Airsoft Gun is your best option. Once you have purchased your AEG (Automatic Electric Gun) and a battery and charger setup, they are fairly inexpensive to operate since no CO2 or Green Gas is required.

Con’s:

• CO2 Airsoft Guns require the additional cost to buy the CO2 cartridges as they will not function without it. CO2 Airsoft Guns have a limited power output and lose power as you shoot and use up the CO2. CO2 Airsoft Guns are effected by hot and cold temperatures and will have less power in colder temperatures and may not even work in super cold environments. CO2 Airsoft Guns will have a more conservative ammunition capacity since too high of a capacity magazine would freeze up the magazine and even the gun.  

• Again since Green Gas (Propane) Airsoft Guns work much like CO2 Airsoft Guns, they are effected by cool down and lose power when shoot quickly or as the Green Gas or Propane runs low. Green Gas does not expand as much as CO2 so it will not be as powerful and even less effective in colder temperatures. Green Gas Airsoft Guns will have a more conservative ammunition capacity since too high of a capacity magazine would freeze up.

• Spring Airsoft Guns are not the best action shooters since you need to manually operate the slide to pullback the spring prior to each shot, this does work well with Pump, Lever and Bolt Action Airsoft guns but is not the best option for pistols since most real steel pistols operate in semi auto mode.

• If you plan to use your AEG (Automatic Electric Gun) in a battle then it will require a multi battery setup which does cost a bit more upfront. AEG (Automatic Electric Guns) are know to not operate as realistically as a CO2 or Green Gas Airsoft gun since CO2 and Green Gas Guns do allow for the same realistic mechanical operation which can give very believable blowback operation, this is hard to replica with an AEG Airsoft Gun.

Power Sources Covered in this review: CO2 - Spring Piston - Variable Pump -HPA (High Pressure Air)

Pro’s:

• CO2 Airguns allow for fast repeat shooting, great for action shooters, generally CO2 Airguns will supply a medium power range. No need to pump or cock your CO2 powered weapon in-between shots and a CO2 power source can allow for a very realistic action of the gun you are shooting.

• Spring Piston Airguns are best suited of single shot situations, they can provide low to high power output depending on the spring used. Spring Piston Airguns are very low cost to operate since you only need to buy the Pellets or BB’s. Spring Piston Airguns are not greatly effected by outside temperatures.

• Variable Pump Airguns allow you to decide how much power your gun will have and can offer very high power output depending on the Airgun. Variable Pump Airguns are very low cost to operate since you only need to buy the Pellets or BB’s. Variable Pump Airguns are not greatly effected by outside temperatures. Variable Pump Airguns generally have very low recoil and vibration.

• HPA (High Pressure Air) Airguns generally do not require pumping or cocking in-between shots and some even come in semi automatic or bolt action. HPA Airguns can have very high power output and even be used on larger game using large caliber ammunition. HPA Air Rifles have lower recoil and low vibration. HPA Airguns can be charged ahead off time so they are ready for use when you need them.

Con’s:

• CO2 Airguns require the additional cost to buy the CO2 as they do not function without it. CO2 Airguns have a limited power output and lose power as you shoot and use up the CO2. CO2 Airguns are effected by hot and cold temperatures and will have less power in colder temperatures and may not even work in super cold environments.

• Spring Piston Airguns require cocking before each shot. Spring Piston Airguns can have a lot of recoil and vibration, so much so that special optics must be considered when buying an optical sight. The action of the spring recoil can effect accuracy, especially if you are not use to the vibration and recoil or have spent some time practicing using a Spring Piston Airgun.

• Variable Pump Airguns will require multiple pumps to achieved maximum power output which can take some time in-between shots. So you are going to have to work for each shot.

• HPA (High Pressure Air) Airguns require the use of a manual pump to fill their built in air tank to maximum pressure and it does take a lot of time to manual fill an HPA tank. Alternatively you can have the air tank filled at a shop or buy a pressurization system similar to a scuba tank out paintball setup, the cost of this setup can be very high but will save you the castle of manually pumping air in to your HPA Airgun. HPA Airguns are generally a little more bulky then other Airgun systems since they have to accommodate fairly large air pressure tanks.

Power:
Generally speaking a longer barrel is going to allow for more power. If you compare most CO2 pellet pistols to CO2 Pellet Rifles, you will find that the CO2 Pellet Pistol will generally shoot about 300-400 fps using a standard lead Pellet. On the other hand many CO2 Pellet Rifles can get up to as high as 600 fps which is much better speed for humanly shooting some smaller pests.

If you are talking about Springer or Variable Pump Air Pistols versus their Air Rifle counterparts, again the Air rifles will generally shoot with much more power. I have seen some none CO2 Air Pistols shoot up into the 500-600 fps range but again compered to none CO2 Air Rifles, they can even double these numbers.

Some of you may ask about Steel BB Pistols and Rifles. I personally would never really sue this type of ammunition for pest control simply because most BB Rifles have much less raw power than Pellet Rifles and steel BB’s will not be as accurate at any type of longer distance.

Stability:
When holding any rifle from the shoulder, you have three point of contact with your body spread out in a much longer distance than a two handed pistol grip. Holding steady even without a rested position is much easier using a rifle. Even when using a rested position, the rifle will more stable.

Accuracy:
A big factor in accuracy is stability but there are also other factors to consider. Barrel length its self does not make the gun more accurate, you only need a few inches of barrel length to get constant accurate results from a gun. What makes longer barreled guns more accurate is the distance between the rear and front sight. The closer the sights are together, the more margin for error there is, the longer you spread out the sights from each other, the more accurate the sighting system becomes.

Overall More Humain:
When you consider Air Rifles tend to have higher power, better accuracy and overall more consistency than shorter barreled Air Pistols. The logical choice for humanly shooting a Pest is to use the Air Rifle. The last thing you want to do is make any animal suffer, even if it has been causing a lot of havoc around your home or farm or place of business.

This is not to say that a “Real Gun” is not as good as an Airgun or better in other ways, in this video I’m just pointing out how an Airgun in some cases can actually be better suited than a Real Gun.

Availability: What I mean by this, is that in many countries Real Guns can be very hard to acquire and often require safety course and applications before one can purchase a Real Gun. I have no problem with this but it is a reality that must be considered. Having an Airgun versus not having a gun at all makes it a better option for people that live in countries that have strict gun laws. Here in Canada we are allowed Real Guns, even pistols but we do have restriction on our pistols and so I can only get certain guns in an Airgun version. As a collector this is better than not having the gun at all.

Price to Buy: Generally speaking you can pickup an enter level Airgun for much less money than a real gun.

Cost to Shoot: Real gun ammo prices have been steadily increasing to the point that a day out shooting can cost several hundred dollars just on the ammunition alone.

Comparison of Price:

• 50 rounds of 9mm ammo will cost around $18.00

• 6000 rounds of 4.5mm Steel BB will cost about $18.00

• CO2 is a bit less than $1 per 12 gram Cylinder which can yield up to 100 shots each.

• To shoot 100 rounds of 9mm will cost close to $40 versus 100 shots of 4.5mm steel BB at around $1.

• For this reason alone an Airgun can make a lot of sense even for Real Gun owners looking to get more cost effective practice time.

Access to Shooting Locations: Depending on where you live you will have to consider your local laws and where you are allowed to shoot both types of guns but typically you can shoot an Airgun safely just about anywhere as long as you implement some backstop safety precautions. Here in Canada we can only shoot a pistol at designated gun ranges, where as Airguns have a lot more allowances to shot them as long as you are not braking any city bylaws.

Training Guns: Even if you plan to eventually step up to a Real Gun at some point, an airgun is a great option to first learn proper gun handling skills since if you where to make a mistake, the consequences are much less severe. Airguns are also a lot less intimidating than a real gun since they are much quieter and have less recoil, you don’t even need to wear ear protection with most Airguns which means an instructor can communicate to his pupil on the range a lot easier.

Prop Guns: Since Replica Airguns look so much like real guns these day, they can often be used as a safer substitute for use in Movie, TV or other Photo and Video productions. Using a Real Gun on set generally requires a certified “Gun Wrangler” be on hand as Real Guns must be transported, stored and handled using very strict regulations. Airguns generally do not need to follow the same rigid regulations that Real Guns are bound to.

Tactical Training with Live Targets: Obviously shooting a real gun at a live target would not fair well for anyone involved, so that is completely out of the question. Airsoft Airguns are however perfect for Tactical Training and other weapons based simulations. All that is required for safety when using Airsoft guns is the use of eye protection and generally some heavy clothing.

I am sure there are some more areas in which Airguns may have the advantage over a Real Gun but these are the main ones that I could think of.

I already made several review videos for both Gletcher NGT (4.5mm Steel BB) and the Gletcher NGT R (.177 Cal Pellet) Revolvers, including table top and shooting videos. So make sure to check those videos out for more information on both versions of Gletcher NGT and NGT R Revolvers.

I did however miss some noteworthy details that I wanted to cover in this video. Firstly, the real steal Nagant M1895 Revolver this Gletcher NGT is styled after has a very unique gas-sealing system that the Airgun version does not replicate or really require but it is worth mentioning.

Here is some more info on how the original Nagant M1895 Revolver Gas Seal System works:

(From Wikipedia) The M1895 by contrast, has a mechanism which, as the hammer is cocked, first turns the cylinder and then moves it forward, closing the gap between the cylinder and the barrel. The cartridge, also unique, plays an important part in sealing the gun to the escape of propellant gases. The bullet is deeply seated, entirely within the cartridge case, and the case is slightly reduced in diameter at its mouth. The barrel features a short conical section at its rear; this accepts the mouth of the cartridge, completing the gas seal. By sealing the gap, the velocity of the bullet is increased by 15 to 45 m/s (50 to 150 ft/s.) This feature also eliminates the possibility of injury through the dangerous expansion of gases from the cylinder behind the barrel, which are easily capable of severing a finger if the user holds the gun incorrectly (with a finger positioned in front of the cylinder during fire) - a noted safety-issue in conventional revolvers.

Moving on to some of the features incorporated into the Gletcher NGT NGT-R CO2 BB and Pellet Revolver that I did not point in any of my previous videos. There is an extractor rod that can be used to extract a shell, this is not really necessary on the airgun version since the shells do not expand and tighten on the cylinder as they would n the real steal Nagant M1895 Revolver built is nice that we can replicate this feature with the Airgun version. You can also remove the cylinder completely from both the BB and Pellet shooting Gletcher NGT NGT-R CO2 Revolvers. The cylinder is actually very heavy and adds a lot of weight to this compact 7 shot Revolver.

It is always nice when an Airgun is built in such a way that it replicates the real steal version as closely as possible and the Gletcher NGT NGT-R CO2 BB and Pellet Revolvers do this nearly perfectly.

Buy Gletcher NGT Revolvers in Canada

Buy Gletcher NGT Revolvers in the US

I get asked on a daily bases form many of my Vimeo Viewers about how and if there is a way to get rid of the White lettering on Airguns, Typically people are wanting to remove the intrusive Warning instructions from Airguns like the Cybergun Tanfoglio Witness 1911, the Cybergun/Swiss Arms GSG 92/P92 and many other CO2 Replica Airguns that have lettering or branding that you may want to get rid of.

In this Instructional Tutorial Video I show you how can at least tone down the white lettering and even completely remove it on some Airguns without damaging the Airguns finish underneath the white lettering. You will have to use some patience and perhaps repeat this method a few times but the end result is worth the effort.

The magical product I use to remove the white lettering on many popular Airguns is a product from Birchwood Casey called the Presto Gun Blue Pen. This product is actually designed to touch up real steel gun in areas where the blueing has worn off, lucky for us the Birchwood Casey Presto Gun Blue Pen also works well to remove the ugly white lettering from Airguns.

I have often been asked which of the Shells for the Shell Loading Revolvers work in which Shell Loading Revolvers? After all many of them look a lot alike so can you mix and match Shells for the various types of Shell Loading Revolvers?

In this Vimeo Instructional Video I test out a bunch of Shells to see which ones actually will work or not work in several of the most popular Shell Loading Revolvers.

Some of the Shell Loading Revovers Tested in this Instructional Video are:

• Dan Wesson Classic Revolver (BB, Airsoft, Pellet)

• Dan Wesson 715 Revolver (BB, Airsoft, Pellet)

• Colt Single Action Army Peacemaker (BB, Airsoft, Pellet)

• Gletcher NGT and NGT-R (BB and Pellet)

• Webley Mark VI (BB)

• KWC 357 / Umarex 357 (BB, Airsoft)

• G&G G731 (Airsoft) 

Watch and see what happens when you take an RWA M1919 AEG Airsoft Machine Gun and put it head to head against the all metal F1 Chrony Chronograph. That's right, my old temperamental Chrony F-1 Chronograph meets its first opponent! Did it survive or did it bow to the hail storm of 6mm Airsoft BB's...

Recently I picked up my new Chrony Beta Shooting Chronograph to replace my F-1 that has not been working so well for me in past videos... I wanted to get outside and give it a try shooting a few of the airguns that I was not able to test out properly. Now I know that under my patio deck, the lighting is not optimal even on sunny days and because of this I have never expected to get perfectly consistent fps recording but as many of you know, my old Chrony F-1 was pretty much not working at all near the end there.

I have ordered a light kit which will help out a lot especially when summer is over and the sky becomes more overcast. But for now I decided to test my Chrony Beta Chronograph under my deck roof as I have been testing all along and see if I can get better results with this newer Beta version.

So makes sure to watch my Vimeo video testing of my Chrony Beta Shooting Chronograph shooting a selection of airguns.

I have already made a couple of videos for the Sig Sauer MPX ASP .177 Caliber Pellet Rifle, my official Table Top Review and a Preview Video where I shoot some rounds at a Sig Sauer Quad Shooting Gallery.

In this Review Video I focus on the shooting performance of the Sig Sauer MPX ASP .177 Caliber Pellet Rifle to find out what kind of FPS we can get out of it and exactly how accurate the MPX is from 30 feet back using a fairly stable semi rested shooting position. I'll tell you right away my Chrony Chronograph has officially called it quits and I will be looking at replacing it for future Field Test Shooting videos. Lucky for us Sig sent me their real world inhouse testing using both 5.25 grain high velocity pellets and standard 8.18 grain lead pellets.

Here are the average results Sig achieved from each pellet type shooting an 8 shot string.

5.25 Grain Alloy High Velocity Pellets:

• FPS - 506

• Energy in Foot pounds - 2.98

• Energy in Joules - .1257

• Temperature at time of testing - 71 Degrees Fahrenheit 

8.18 Grain Standard Lead Lead Pellets:

• FPS - 447

• Energy in Foot pounds - 3.63

• Energy in Joules - .153

• Temperature at time of testing - 71.5 Degrees Fahrenheit

In terms of accuracy, this rifle is made to shoot at much further out ranges than 30 feet but I was still able to get on what kind of a grouping is possible with the Sig Sauer MPX ASP .177 Caliber Pellet Rifle. I first shot 10 rounds at my paper target and then had a quick look. I was able to get a nice 1 inch grouping which I am sure I could improve upon with some more shooting time with the rifle. I was also not using a magnified scope, just a standard red dot. I then shot the remaining 20 rounds to finish off the 30 round belt fed magazine and for the most part the majority of the pellets all fell within the first 10 shot grouping and I did rip these shots off pretty quickly, about as fast as I could pull the trigger that is.

All in all the Sig Sauer MPX ASP .177 Caliber Pellet Rifle is a good performer, I am very happy with FPS form an 8 grain pellet consistently hitting 450 FPS, that's plenty fast enough to shoot all kinds of targets even out at further ranges. Accuracy was also consistent even under rushed shooting so I can imagine the Sig Sauer MPX ASP .177 Caliber Pellet Rifle would make a great trainer for tactical shooting situations. I thing Sig has a real winner here, great looks, excellent quality and good performance all at a reasonable cost. I just hope we get them here in Canada soon...

I wanted to make a quick update video to let everyone know what I will be up to over the next few weeks since it will effect my video production just a little bit, that said I will do my best to keep the videos coming...

If you remember last year around August, I entered a Fitness contest where I competed in Men's Physique. Well I did fairly well and placed 1st in two divisions, Masters and Open. What this means is I am now qualified to compete in my local Provincial Finals this year which is coming up in less than two weeks. The event is called the Vancouver Pro Am and it will be held in Vancouver BC Canada.

To get to the point, my contest prep especially the last couple of week is fairly taxing on me physically and mentally, it also takes up some of my time. So my videos may not be as regular and they may not be as put together since my mind is not working 100% right now due to the lack of food and carbs I am not eating ;) Anyway I will do my best! You can follow my Fitness journey over at www.GetFitOver40.com.

I also talk about two new Sig products I will be picking up next week to review, the Sig Sauer P250 and Sig Sauer P226 CO2 Blowback Pellet Pistols. I hope to at least have a preview video for you later on next week.

Lastly I am working on a couple of Field Test Shooting videos that I have needed to pump out, one is for the ISSC M22 CO2 Blowback BB Pistol and the other is for the Sig Sauer MPX .177 Caliber Pellet Rifle.

Stay posted for all of these upcoming videos...

Type: Pellet Rifle.
Manufacturer: Sig Sauer ASP
Model: Sig Sauer MPX ASP
Materials: Metal and Nylon Fiber build.
Weight: 7 Pounds (3300 Grams).
Barrel: 8 inch steelrifled.
Propulsion: 88 or 90 Gram CO2.
Action: Semi Auto,double action only.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 30 rounds belt fed.
FPS: Up to 600 fps (When shot by a Unicorn)

Trigger Pull: The trigger pull on the Sig Sauer MPX ASP .177 Caliber Pellet Rifle is actually pretty decent when you consider the first part of the trigger pull is used to advance the belt fed 30 round magazine. One would think that there would be a lot of added friction from the belt but this does not seem to be the case. There is some internal blowback action going on but it is only used to cock the internal hammer/striker which does lesson the overall amount of trigger pull required. The trigger pull is shorter than expected with all that is going on and it's not overly heavy so quick and predictable action shooting is very possible with the Sig Sauer MPX ASP .177 Caliber Pellet Rifle.

Accuracy: So far I have not done my official Field Test Shooting Video for the  MPX ASP .177 Caliber Pellet Rifle but I did have the chance to get out and shoot some rounds down range at my Sig provided Quad Shooting Gallery that I had setup about 35-40 feet away. Even though I did not have my red dot all perfectly sighted in I was still able to hit the smallish metal targets fairly well using the Sig Sauer MPX ASP. In terms of velocity you can expect from the Sig Sauer MPX ASP .177 Caliber Pellet Rifle, 600 fps is a bit optimistic. Sig did send me a real world fps performance spread sheet they had conducted using both 5.25 grain alloy pellets and 8.18 grain lead pellets shooting 8 rounds and averaging out the fps. The 5.25 grain pellets averaged in at just over 500 fps while the heavier 8.18 grain pellets came in with an average of just under 450 fps. Pretty much what I would expect from a shorter barreled CO2 rifle.

Build Quality: The build quality for Sig Sauer MPX ASP .177 Caliber Pellet Rifle is excellent, you can tell Sig Sauer had a lot of hands on in the design and production of this Pellet Shooting Air Rifle! The materials used and fit and finish are top notch and the mechanical function again is really good, I am kind of amazed at how well their belt fed rotary magazine design works in terms of feeding and operation. So far I have not experienced any pellet feeding problems at all using both lead and alloy flathead pellets.

Realism: The Sig Sauer MPX ASP .177 Caliber Pellet Rifle is for the most part designed to be used as a side by side optional training aid for the real steel Sig Sauer MPX Rifle. Sig wanted the pellet version to look and feel as close as posable and Sig has done a good job with this. Other than the lessor recoil and noise factor, the Sig Sauer MPX ASP .177 Caliber Pellet Rifle works and shoots much the same as a real steel Sig Sauer MPX Rifle.

Pros:

• Has to be the best semi auto pellet rifle replica I have seen and shot to date.

• Near perfect replica of the real steel Sig Sauer MPX including licensing and trademarks.

• Awesome build quality, lots of metal parts and the nylon parts are true to form and very solid.

• Rifle has been tested to shoot over 15,000 rounds reliably.

• 30 round full size belt fed magazine has super high capacity and works flawlessly.

• Decent fps performance, about what I would expect from a multi-shot CO2pellet shooter and totally usable.

• Trigger feels really good, not too long or to heavy and very consistent feel on every shot.

• Fully adjustable pop up front and rear sights.

• Lots of rails for your pick of sight options and other add on accessories.

• Very accurate with it’s 8 inch rifled barrel.

Cons:

• Rear stock is none adjustable so the gun may feel kind of cramped for larger shooters.

• Internal blowback action does not advance the belt fed magazine but does cock the internal hammer.

• FPS claim of 600 fps seems a bit optimistic compared to real world testing.

Comments:

I have been waiting to get my hands on the Sig Sauer MPX ASP .177 Caliber Pellet Rifle for some time now and the wait has been worth it for sure. There are really no other guns out there right now other than perhaps the Umarex CX4 Storm that compare to the Sig Sauer MPX ASP .177 Caliber Pellet Rifle and even so I feel the Sig Sauer MPX is by far the better of the two CO2 Air Rifles. OK so the MPX does not really come close to hitting 600 fps but did you really believe that in the first place? Still consistent 450 fps from a decent grain lead pellet is about what you would expect from a short barreled CO2 rifle. If you do want more fps then look at the MCX with over double the barrel length of the MPX, this will easily get you an additional 100+fps for those of you who thrive on velocity performance. I am fine with 450-500 fps since this is all that is needed to accuracy shoot and nock over most targets at a variety of ranges.

My Vimeo Table Top  Review of the Sig Sauer MPX ASP .177 Caliber Pellet Rifle:

Buy the Umarex Steel Force in Canada

Buy the Umarex Steel Force in the US

I was excited when I first heard that Sig Sauer was coming out with their own line of pellet shooting airguns and that was about 2 years ago! So it's been a long time coming for me to finally get my hands on one of Sigs own in-house Airguns. Sig Sauer was kind enough to send me three of their ASP (Advanced Sport Pellet) airguns, one of which arrived last week, the Sig Sauer MPX ASP .177 Caliber Pellet Rifle. I will also be receiving Sigs P250 and P226 CO2 Blowback Pellet Pistols for review when they are sent to me hopefully soon.

I will be performing my standard Table Top and Field Test Shooting videos for all of the Sig Sauer Airguns being sent to me but wanted to get out this preview video for the Sig Sauer MPX ASP .177 Caliber Pellet Rifle to give you a little info on it right away and also let you know what's coming up in terms of Sig Sauer product reviews.

In this preview video I do a little bit of fun backyard shooting simply because I could not resist having a go with this awesome air rifle any longer and needed to shoot it. I was not disappointed! Every pellet I placed in the 30 round belt fed magazine fired flawlessly from the Sig Sauer MPX ASP .177 Caliber Pellet Rifle. I used both Sigs high velocity 5.25 grain alloy pellets and some flathead 7 grain RWS lead pellets and all my ammo shot well in the Sig Sauer MPX ASP .177 Caliber Pellet Rifle. I have not done a Chronograph test so far for the Sig MPX but can say the pellets where getting to my Sig Sauer Quad Shooting Gallery Target in no time and I had placed a good 35-40 feet away. Once I figured out my sights I was able to continently hit what looked like pretty small targets from where I was standing, this was no surprise since the Sig Sauer MPX ASP .177 Caliber Pellet Riflehas an 8 inch rifled barrel.

Sig has done some real world pellet fps testing on their own using both light weight 5.25 grain pellets and heavier 8.18 grain pellets and the numbers for an 8 shot average came in at around 505 fps using 5.25 grain pellets and around 450 fps using 8.18 grain pellets. That's plenty enough power to rip into your targets setup even further down range.

My Sig Sauer MPX ASP .177 Caliber Pellet Rifle is the open sight only version but you can get one already paired with Sigs Red Dot system or add your own sighting system, since there are plenty of rails to add just about any kind of accessory to the Sig Sauer MPX ASP .177 Caliber Pellet Rifle.

Check back shortly for my office Table Top and Field Test Shooting videos for the Sig Sauer MPX ASP .177 Caliber Pellet Rifle. And when I do finally get the Sis Sauer p250 adn P226 ASP Air Pistols I will have review videos out for them too.

Buy Sig Airguns in the Canada Replica Airguns Store

Buy Sig Airguns in the US Replica Airguns Store