We have added some items to the Canada and US Replica Airguns Stores, most are completely new items and one is a Canada only item we added to the US store!
KWC 1911 Tac A1 Blowback CO2 Steel BB Pistol
We have added some additional ASG products to our US Replica Airguns Store...
If you have been waiting on a specific Umarex product to be re-stocked, you may want to swing by the Canada Replica Airguns Store and take a peak as we just received an Umarex order...
After many many requests to show how the Umarex Walther PPK CO2 Tab Modification is done I have relented to public demand. I don't actually cut my tab in this PPK CO2 Tab Modification Video but I do go step-by-step in detail and compare my modified Umarex PPK to my unmodified Umarex PPK. It is really very basic on how this is done and only a hack say and perhaps a file are all that is required to make the modifications to the PPK CO2 tab in order to make it flush with the bottom of the handle area.
Your best bet is to simply watch my YouTube Video located below and follow the steps there but here it is in text form:
Place an empty (already pierced) CO2 into your Umarex Walther PPK and tighten the unmodified CO2 tab until fully tightened, just like you would tighten a fresh CO2.
Take note at how many threads are exposed between the bottom of the handle and the top of the plastic CO2 tab, there should be about 2-4 threads exposed.
Unscrew the CO2 tab all the way, place the PPK BB Pistol so it is secure (in a vice of some sort) and use a hacksaw or dremel to shorten the CO2 screw just above the plastic tab at the thread location you previously noted. Be conservative as you can always cut or file the screw a bit shorter if your first cut was not short enough.
Now use the same hacksaw or dremel to cut a notch in the exposed cut area of the CO2 screw so that you can use a slot screwdriver to tighten the CO2 screw.
That's it - Enjoy your modified Umarex Walther PPK CO2 BB Pistol!
Watch my Vimeo Video of the Umarex Walther PPK CO2 Tab Modification Tutorial:
If you're looking to buy an Action Sports Games product then now is the time, we are offering 15% off on the entire line but only untill Sunday Midnight! Use coupon code 74CRL9Y8LLO2 when you checkout. (CANADA STORE ONLY)
This is a kind of two-for-one'r, not only are you getting pretty much a full table top review of the KWC Makarov Airsoft BB Pistol, but you also get a comparison and revisit to the Umarex 4.5mm Steel BB shooting Makarov.
Type: Airsoft - BB Pistols.
Model: Makarov PM.
Materials: Almost all metal.
Weight: 1 pound 12.5 ounces (808 grams) - 1 pound 9.5 ounces (724 grams).
Barrel: Metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto non-blowback: Double action only - Single & double action.
Ammunition Type: 6mm plastic Airsoft BB's - 4.5mm steel BB's.
Ammunition Capacity: 13 round full size metal magazine -18 round metal stick magazine.
FPS: 428 - 380.
Trigger Pull: There is a lot of difference between the trigger on both of these guns, first off the Umarex Makarov has both a single and double action trigger/hammer while the KWC Makarov has a double action only trigger/hammer. Comparing the double action of both guns the definite advantage goes to the 4.5mm Steel BB shooting Umarex Makarov as it is shorter and lighter, the KWC Airsoft Makarov does not have a bad trigger but it is much longer and a bit heavier, but still very usable. The single action trigger on the Umarex Makarov is not really any lighter than when shooting in double action, it is however much shorter with a medium take-up and predictable release.
Accuracy: Both Airsoft and BB Makarov's performed very well in their shooting tests for me, they bot shot fairly well centered with the KWC Makarov getting all five shots in the black bullseye and the Umarex Makarov having a tighter group but just off to one side. This was good news since both guns do not have adjustable sights! They also scored very well in the velocity department shooting over their advertised claimed feet per second rating. The Umarex BB version shot a very respectable 390 fps while the KWC Airsoft pistol shot a very surprising 480 fps well over the claimed factory 430 fps. Both guns also shot very accurately out to ranges of 50 feet or so. From a single CO2 I was able to get 162 shots from the Umarex Makarov and 112 shots from the KWC Makarov before I noticed a significant power drop.
Build Quality: Neither one these Makarov replicas is going to win a prize for build quality, some shortcuts have been made to keep the price down on each model, but they are both built with mostly metal parts and they both performed perfectly for me during my testing. The Umarex 4.5mm Steel BB Makarov did have more moving parts while the KWC did weigh in a bit heavier, both guns had reasonable fit and finish to them.
Realism: In terms of being good Makarov replicas the pair for sure look the part, size and overall weight are very true to the original real Steel Makarov PM with the Umarex Makarov having a working slide, Makarov licensing and the ability to be field stripped. The KWC Makarov had a nicer recessed barrel and full size drop out metal magazine. I was not a big fan of the KWC screws on the right side slide or the Umarex exposed CO2 tab.
Available From: The Replica Airguns Store.
Pros:
Umarex has the working slide.
KWC has full size drop out magazine.
Umarex has double and single action trigger.
KWC has the recessed barrel.
Umarex gets more shots per CO2.
KWC has the higher FPS.
Umarex can be field stripped.
KWC has a bit more weight to it.
Umarex is licensed
KWC does not have ugly warning instructions.
Both guns are mostly metal construction.
Both guns had very good accuracy.
Both guns have realistic working safeties
Cons:
Umarex has the obvious CO2 tab.
KWC has the ugly screws on the right side.
Umarex may be a bit shiny for some.
KWC may shoot a bit too hot for CQB Airsoft games.
Both guns do not have adjustable sights.
Comments:
To be honest when I got the KWC Airsoft BB shooting Makarov, I was not all that awe struck, the lack of a working slide, DOA trigger and screw holes in the slide put me off just a bit. This Airsoft pistol did warm up to me a lot once I shot it, I was surprised by the very high fps and how accurate it was for such a low cost Airsoft pistol. I can really see this gun being used as a backup or sidearm in an out doors style Airsoft game where you may need to shoot targets out at range where other lower powered pistols just would not be able to get out to. The Umarex Makarov has always had a place in my heart, it is just a really good little CO2 BB pistol for the price with mostly all metal parts, a working slide, single and double action trigger and very good overall performance. In my books you can not go wrong choosing either of these Makarov replicas so choose wisely!
My Vimeo Video Table Top Comparison Review for these Makarov Air Replicas:
We have been taking preorders on many of our ASG Airguns and Airsoft guns for our Canada Replica Airguns Store, we where expecting them to be back in stock right around the end of the month. The good news is we got them a bit early so we are now filling back orders and most of our ASG inventory is now showing as in stock and ready to ship!
So if you've been waiting for an ASG gun, make sure to grab yours now before we run out again...
So I'm not going to say who won in this post, you will just have to watch my 15000000 Video Views and 20000 Subscribers Giveaway Contest Winner YouTube video to find out who the winner is!
I would like to thank everyone who took part in this giveaway and of course for all my subscribers, followers and viewers who have made Replica Airguns what it is today :)
So watch the vdieo to see who won!
High Resolution Scan of Target Results
Buy the KWC Model M1911 A1 Tac Blowback 4.5mm BB Pistol in Canada
For everyone that got in on the 15000000 Video Views and 20000 Subscribers Giveaway Contest, the finalist have now been determined! There where around 1000 entires and I have narrowed it down to 100 finalists so that would be a 1 in 10 chance to become a finalist, not bad if you made it this far.
If you are not familiar with this contest and what the giveaway is then check out this link here to the contest post and here is a link to the contest prize which is a KWC Model 1911 Tac A1 CO2 Blowback 4.5mm Steel BB Pistol.
Contest Finalist List!
This Monday or Tuesday (April 22-23 2013) I will be shooting at my list of 100 finalists and the winner this time will be the one left unscathed! I will be recording it all in real time so even if I miss it we will have proof of who the winner is :)
OK, so make sure to check back in early next week to see who the lucky winner is!
Buy the KWC Model M1911 A1 Tac Blowback 4.5mm BB Pistol in Canada
This is not meant to be a full review of either the BB or Airsoft version of the Cybergun - KWC CO2 Blowback Mini UZI's but I do talk about specifications, show you around both guns, and put them both through a full Field Test so I guess in a way, perhaps it can be considered to be a full review ;)
I will list the specifications here for you but I am not going to get into details like Trigger Pull, Build Quality, Accuracy and Realism. You can check out my other video reviews for more information on the Mini UZI:
Type: CO2 Blowback Machine gun.
Manufacturer: Cybergun - KWC.
Model:Mini UZU.
Materials: Metal and Polymer.
Weight: 4.8 pounds.
Barrel: Metal, non-rifled.
Propulsion: CO2 x1.
Action: BB Semi auto only - Airsoft selectable semi & full auto, single action only.
Ammunition Type: 4.5mm Steel BB - 6mm Plastic Airsoft
Ammunition Capacity: 25 - 38 rounds
FPS: 350 - 400
As I said you can check out all my other videos for info on these very accurate Mini UZI Replicas, I mainly want to go over some of the main differences and similarities for both the BB and Airsoft versions.
In terms of build quality they are made almost exactly the same and weigh in at a hefty near 5 pounds, the only differences are the inner barrel and magazines to accommodate the different sized ammo. The BB version has a 25 round single stack magazine that does not have a follower to stop the bolt from continuing to operate even after the magazine is empty. While the 6mm Airsoft version has a double stack magazine that holds 38 rounds and does have a follower to stop the bolt which can save you some unintentional wasted CO2.
The Airsoft Mini UZI version is distributed by KWC while the 4.5mm BB version is distributed by Cybergun, you will find the UZI and IWI licensing on the Cybergun 4.5mm BB version but not on the KWC 6mm Airsoft version.
Out of the box the KWC Airsoft Mini UZI is ready to go in both semi auto and full auto while the 4.5mm steel BB version will only shoot in semi auto mode, it can however be easily modded to shoot in full auto.
Both guns come in cardboard boxes with manuals, some BB's and an Allen key to tighten the CO2. The KWC Airsoft Mini UZI also comes with a handy speed loader.
There is a slight fps velocity difference between the two with the KWC Airsoft 6mm plastic rounds traveling at around 400 fps (with .20 gram BB's) and the 4.5mm Steel BB's traveling at right around 350 fps. In the field test portion I test both guns out on some water filled cans to see how each ammo type performs in terms of penetration.
Your best bet is to watch both my Table Top and Field Test Comparison Video Reviews and see for yourself how they compare!
Great news, we where finally able to bring the Daisy Winchester Model 11 CO2 Blowback BB Pistol into our Canada Replica Airguns Store!
You can checkout my full Table Top Video Review and Field Test Video Review for more info.
We now have them in stock so get yours today.
Buy Winchester Model 11 BB Pistol in Canada - Buy BB Pistols in the US
We just added a nice sellection of new NcSTAR accessories to the Canada Replica Airguns Store!
ALL GUNS ARE NOW SOLD - THANKS FOR THE AWESOME RESPONSE!
This is a first for me but I guess you could say I have to make room for some more guns ;) I have some duplicate guns and a couple I juts don't have a need for anymore so instead of having them sit around collecting dust, I thought I would offer them up for sale and get them in the hands of someone who can really appreciate and get some use out of them...
Here is a list of the items up for sale:
Shipping/Handling is $15 Canadian and $25 to the US and you must be 18 or over to buy. You will need to email me at mike@replicaairguns.com to let me know what gun/guns you want to buy - first come first serve, I will send a PayPal request to the person with the first offer to buy and give them 24 hours to pay or I move on to the next buyer.
You can watch my YouTube Video to get a good look at each pre-owned item up for sale:
It's been a very long while since I had a Giveaway - Contest but we hit an amazing milestone, 15,000,000 Video Views & 20,000+ Subscribers and so I felt it was about time we did something about this to show our appreciation to all our fans, viewers and loyal customers.
15,000,000 Video Views & 20,000+ Subscribers Giveaway Contest Rules:
Good luck to everyone!
Buy the KWC Model M1911 A1 Tac Blowback 4.5mm BB Pistol in Canada
It's been a while since I mentioned any YouTube Milestones, well today we hit a pretty big one and I have been waiting for this one to roll out another Giveaway/Contest... We just hit 20,000 YouTube Subscribers (actually 21,000) and 15,000,000 Video Views over on our YouTube Channel and again thanks to everything because without you this would not be possible.
So stay tuned because early next week in celebration of this awesome accomplishment I will be announcing a Giveaway/Contest so be sure to check back for more details on what we are giving away and how you can get involved!
The KWC/Cybergun Model 1911 Blowback BB Pistols and Airsoft Pistols are very popular and so I tend to get lots of questions about them like: Are they the same quality? What version shoots the best? How do I remove the white warning lettering? Can I get one in an Airsoft version? Can I add a laser or tactical light? Can I change the grips...
So in this YouTube video I compare all four existing KWC and Cybergun model 1911's showing you the Cybergun Tanfoglio Witness 1911 in 4.5mm Steel BB, the KWC Model 1911 and Model 1911 A1 Tac also in 4.5mm Steel BB and lastly the KWC Model 1911 in 6mm Airsoft plastic BB.
Watch my Vimeo Video of these four KWC and Cybergun Model 1911 4.5mm Steel BB and Airsoft CO2 Blowback Pistols:
We just added some Baikal producst to the Canada Replica Airguns Store, we even have the already full auto modded Baikal Drozd Blackbird ready to shoot 1200 rounds per minut.
I wanted to make sure anyone waiting for some of our ROHM Blank guns to come in to the Canada Replica Airguns Store got a heads up, we just got in a bunch of ROHM RG-88 Semi Auto Style 9mm P.A.K blank pistols alongs with some extra magazine for them. We also received some more ROHM RG-56 and Little Joe Revolvers in .22 crimped blank versions.
If you want one, make sure to grab one, they don't last long around here...
Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the Canada Store
Type: 6mm Plastic BB Airsoft Pistols.
Manufacturer: KJWORKS.
Model: KP-05 (1911 Replica)
Materials: Metal slide & frame.
Weight: 2.29 pounds (1040 grams).
Barrel: Metalnon-rifled smooth bore.
Propulsion: 12 gram CO2.
Action: Blowback, Single action only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 30 rounds.
FPS: 366+ fps.
Trigger Pull: The trigger pull on the KJWORKS KP-05 is what you would expect from a true 1911 single action only trigger, it has very little take up with a smooth crisp and light release to it.
Accuracy: I shot the KJWORKS KP-05 from 20 feet out in semi rested position and got very good test results. I was able to place 10 rounds in under 1.5 inches and getting four shots right in the bullseye making the shot placement very good even without adjusting the sights (which can be adjusted for windage). The KJWORKS HP-05 1911 styled HI-CAPA Airsoft Replica shot right around 300 fps range while conducting my 5 shot average chrony testing which was surprisingly low for the CO2 magazine version, this may have been a temperature or CO2 related condition, when I conduct my full Field Test Shooting Review, I will review this and see if we can do better? I also got two full 30 round magazines worth of shots which is what you would expect from this style of full heavy blowback airsoft pistol.
Build Quality: I am extremely impressed with the build quality of all the KJWORKS Airsoft guns so far, the fit and finish is the best around on any of my guns including my 4.5mm steel BB shooters. After shooting several magazines worth of BB's, areas that are painted like the metal friction areas show very light wear which is rarely the case with metal built blowback airguns. Again the tolerances between the moving parts like the slide and frame are very tight showing excellent workmanship and machining from KJWORKS.
Realism: The KJWORKS KP-05 6mm Airsoft pistol is a replica of a High Capacity styled tactical 1911 45 Auto and is a great looking and functioning replica. You will not find any actual licensing on this pistol and the CO2 magazine does stick out a bit to accommodate the 12 gram CO2 but other than that this Airsoft pistol looks and works near exactly like a real 1911 tactical semi auto and is fully field strip-able. I really like the updated more tactical add ons like the tactical rail, machined trigger and hammer, white dot adjustable sights, wrap around grips and ambidextrous safety.
Available in the: Replica Airguns Store
Pros:
All metal pistol with good overall realistic weight to it.
Full heavy blowback operation.
Typical KJWORKS excellent fit and finish.
High capacity magazine 30 rounds.
Very good accuracy and well centered on target.
Nice replica of a High Capacity Tactical 1911 styled pistol.
I like the stainless highlights and ambidextrous safety and Rail for accessories.
Fully field strip-able.
Cons:
Shot a bit low Feet Per Second for me - should do better?
CO2 magazine is long to accommodate the 12 gram CO2.
Slide is heavy enough but seems to be a bit sluggish which is kind of a 1911 trademark so that can be taken as good or bad.
Comments:
The KJWORKS KP-05 1911HI-CAPA is another excellent full blowback Airsoft pistol from KJWORKS. The HP-05 is a classic upgraded more modernized version of the 1911 semi auto pistol which is a great foundation to build any pistol from. I found the CO2 usage to be decent on the KP-05 but felt that I should have been able to get more fps out of this pistol, I will be testing the KJWORKS KP-05 again and hope to see some better results in this area. With that aside, the KP-05 1911 HI-CAPA is a great shooter and as is, with its high capacity magazine would be a perfect sidearm for any Airsoft related squirmish or even just for honing up your shooting skills when getting to the gun range is not an option.
