View fullsize

In this field test shooting review, we run the G&G L85 Carbine AEG Airsoft Rifle through our standard range testing, covering raw velocity consistency on the chronograph and accuracy at a distance of 30 feet in both semi-automatic and full-automatic modes.

If you are looking for detailed specifications, internal details, or close-up styling footage, make sure to check out our comprehensive Table Top Review. Today, however, is all about real-world performance.

Chronograph Testing

We tested the G&G L85 Carbine using 0.25g Airsoft BBs, which are slightly heavier than standard 0.20g ammunition. We put five rounds through the chronograph to establish an average velocity:

• Shot 1: 329 FPS

• Shot 2: 329 FPS

• Shot 3: 328 FPS

• Shot 4: 327 FPS

• Shot 5: 328 FPS

• Shot 6: 328 FPS

Chronograph Verdict

The G&G L85 Carbine AEG Airsoft Rifle demonstrated outstanding consistency, hovering reliably between 327 and 329 FPS averaging 328 FPS. Because we utilized heavier 0.25g BBs for this benchmark, you can expect this rifle to comfortably shoot right around the 360 FPS mark when using standard 0.20g rounds.

This velocity output sits perfectly within Canada’s import requirements, which require a baseline velocity over 366 FPS. It provides an optimal balance for close-quarters battle (CQB) environments while retaining enough power to remain viable for mid-range outdoor field skirmishes.

Accuracy Testing

Moving over to the accuracy portion of our evaluation, we set up a fresh paper target downrange at a distance of 30 feet.

Semi-Automatic Accuracy (10-Shot Group)

Firing a 10-shot string in semi-automatic mode, the G&G L85 Carbine produced a tight, highly respectable 1.5 to 2-inch grouping. The grouping bias leaned slightly high and a bit to the left of the center bullseye, but the consistency from shot to shot was remarkably uniform.

Plaintext

                  [ Target Center ]
                         o
                        /
                       /  Slightly High & Left
                      v
               [ X X X X X ] 
               [  X X X X  ]  --> 1.5" - 2" Grouping

View fullsize

Full-Automatic Accuracy (Burst Test)

Switching over to full-automatic, we aimed slightly low on the paper target and held down the trigger to run through a heavy burst of approximately 50 to 70 rounds until the spring drive ran clear.

Despite a couple of skipped cycles due to the mid-cap magazine running low on ammunition toward the end of the burst, the rifle punched a solid, definitive hole right through the target. The overall full-auto spread expanded slightly but stayed locked within a very consistent 3 to 4-inch grouping.

Operating Impressions

The mechanical performance of the G&G L85 Carbine leaves a distinct impression:

• Rate of Fire: Powered by an 11.1V 3-cell LiPo battery, the rate of fire is snappy and crisp, delivering exactly the kind of aggressive output you want from a high-quality AEG.

• Tactile Feedback: While it doesn't feature a true hard-kicking blowback system, the internal cycling produces a noticeable "shoulder tap" sensation, offering a bit more mechanical feedback than a standard, sterile AEG platform.

• Acoustics: It is worth noting that this is a relatively loud rifle. The gearbox and motor produce a distinct, metallic rattle with every cycle. It sounds robust and mechanical, but it is certainly not a weapon designed for stealth operations.

• Trigger Pull: As an electric switch trigger typical of premium AEGs, the break is highly responsive with virtually no take-up, allowing for quick follow-up shots in semi-auto mode.

Final Thoughts & Availability

The G&G L85 Carbine AEG Airsoft Rifle is an exceptionally solid performer, validating its premium design with excellent velocity consistency and tight groupings on the range.

• Canada Customers: You can purchase this exact model directly through our Replica Airguns Canada Store.

• US Customers: Check out the Replica Airguns US Store for current inventory on this model or comparable bullpup airsoft alternatives.

For more technical reviews, articles, and field trials, head over to Replica Airguns. If you are watching this on an external platform, please head over to our YouTube channel, subscribe, and help us rebuild our video community. We have over a thousand classic review videos archived along with all of our newest releases.

In this field test, we put the Specna Arms SA-E04 AR15 AEG through its paces, focusing on its chronograph consistency and accuracy performance in both semi-automatic and full-automatic modes.

If you haven't already, be sure to check out the detailed table-top review where we cover the technical specifications, build quality, and close-up features of this highly affordable AR-styled Airsoft rifle.

Chronograph Testing

For this test, we utilized heavier 0.25g Airsoft BBs rather than standard 0.20g rounds.

• Shot 1: 363 FPS

• Shot 2: 362 FPS

• Shot 3: 363 FPS

• Shot 4: 363 FPS

• Shot 5: 362 FPS

Chronograph Verdict

The velocity consistency on this rifle is incredibly impressive, varying by only a single foot per second across consecutive shots. While 0.25g BBs clocked in around the 362–363 FPS mark, switching to standard 0.20g BBs will easily push this rifle well into the 400 FPS range.

Note on Compliance: The legal limit for an airsoft gun to be imported into Canada requires it to exceed 366 FPS with a 0.20g BB. Because this rifle clears that floor easily with heavier ammunition, it comfortably complies with Canadian import guidelines.

(Note: The SA-E04 includes an optional, lighter replacement spring in the box if you need to lower the velocity for local indoor CQB field limits).

Accuracy Testing

We set up a paper target at a distance of 30 feet to observe grouping behavior under a controlled, seated position.

View fullsize

Semi-Automatic Accuracy (10-Shot Group)

The initial 10-shot semi-automatic string produced a very respectable 1.5-inch grouping. The Specna Arms SA-E04 AR15 AEG grouped tightly and predictably, making it more than capable for indoor CQB fields or mid-range outdoor skirmishes.

Full-Automatic Accuracy (Burst Test)

Switching over to full-automatic, we sent a heavy volume of fire downrange (approx. 50 to 70 rounds). The mechanical grouping stayed reasonably tight at roughly 2 inches, though the placement shifted vertically.

Sight Alignment & Out-of-the-Box Adjustments

During the shooting test, the rifle consistently grouped low relative to the center mass of the target, striking about 8 to 9 inches below the point of aim.

Plaintext

[ Aim Point ]  -->  o (Top of Target)
                    |
                    | ~8-9 Inches Low
                    v
[ Impact Point ] --> X (Actual Grouping)

How to Correct It

Because the Specna Arms SA-E04 AR15 AEG shoots low out of the box, the iron sights require basic mechanical adjustment:

• To raise the point of impact, you must lower the front sight post.

• Lowering the front sight forces you to naturally elevate the barrel when aligning your sight picture, bringing the actual point of impact up to match your point of aim.

Alternatively, the top Picatinny rail makes it incredibly easy to bypass the stock iron sights entirely by mounting a red dot or optical sight.

Final Thoughts & Availability

For a bare-bones, budget-friendly Airsoft rifle, the Specna Arms SA-E04 is a durable, lightweight, and remarkably consistent performer. It offers out-of-the-box velocity stability that rivals much more expensive options, making it an excellent platform to build on.

• Canada Customers: You can find this model directly in our Replica Airguns Canada Store.

• US Customers: Check out the Replica Airguns US Store for available inventory on this model or similar AR15-styled airsoft alternatives.

Make sure to follow us across YouTube, Facebook, Instagram, and X (Twitter) to catch our latest reviews, articles, and video content. We are actively rebuilding our primary YouTube community, so your subscriptions and views go a long way!

View fullsize

The Steambow B08 .68 Caliber Tactical Crossbow offers a unique and entertaining option for target shooting. In this field test review, I tested the Steambow B08, a .68 caliber launcher that is designed to shoot paintballs, rubber balls, or foam balls. I wanted to test this 35-pound bow to see how it performs in terms of velocity and real-world accuracy at 30 feet downrange.

For ammunition, I tested two different types of projectiles: black rubber balls and soft yellow foam balls. These projectiles are very light, which means firing them feels almost like you are dry-firing the bow all the time. However, using them makes for a cheap way to have some fun plinking around, and you can easily collect and reuse the ammo.

Velocity testing through the chronograph produced some incredibly consistent, albeit unusual, numbers. I fired six shots in total, using three rubber balls followed by three foam balls. The Steambow B08 delivered readings of exactly 129 FPS for all six shots. Seeing six duplicate velocity readings in a row across two different types of ammo is something I don't think I've ever seen before! This suggests that the projectile weight is less important here, as the bow string only moves so fast. For those looking to get more energy downrange, you will definitely want to use heavier projectiles, like a steel ball, and swap out for a heavier limb. (The Steambow B08 comes with a 35 pound limb for reference).

View fullsize

Accuracy testing was performed from 30 feet downrange on a fresh paper target. I loaded the eight-round magazine with four black rubber balls and four soft foam balls. The Steambow B08 .68 Caliber Tactical Crossbow was hitting quite low at this 30-foot distance, forcing me to aim up at the top of the target just to get the shots on paper. The grouping was somewhat scattered all over the place, indicating that this is a launcher you probably want to be working with a little closer in, at around 20 feet would be better in terms of accuracy. Aiming is done using a built-in little green dot at the front, but there is no real sight adjustment to dial it in or change it. Optimally I would sugest putting a simple red dot sight on the picatinny rail.

Overall, the 35-pound Steambow B08 is built primarily for target shooting and is a great way to have fun with your buddies outside or even inside a garage. I definitely wouldn't want to shoot this for pest control unless you plan to upgrade to a heavier limb and denser ammo. For anyone looking for a cheap, fun plinker with reusable ammo, this launcher is a very entertaining choice.

You can find the Steambow B08 and other Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and accessories at:

• ReplicaAirguns.ca

• ReplicaAirguns.us

View fullsize

The G&G ESG B10 2.0 continues to offer a truly unique experience for those looking for a bullpup-style gas Airsoft Shotgun. In this field test review for the RA Reviews channel, I tested the shotgun to see how it performs in terms of velocity and real-world accuracy at close range. Having already covered the specifications in the tabletop video, this test focuses on its live-fire performance using the 5-round burst mode. The ESG B10 2.0 has the ability to shoot either 5 or 10 rounds per trigger pull, and getting it on the range really shows off what this platform is meant to do. Checkout my Table. Top Review for details, specifications and more close up video.

For ammunition and setup, I used standard green gas and .25g airsoft BBs. Velocity testing through the chronograph produced some solid and expected numbers. The first shot registered a high of 238 FPS, which is very common on a fresh gas fill. After the gun settled down, it delivered consistent readings of 207 FPS, 206 FPS, and 209 FPS, averaging right around 215 FPS. When you are firing five .25g BBs simultaneously, that combined energy is more than enough for close-quarters engagements.

Accuracy testing was performed from 30 feet downrange using the 105-round mid-cap magazine. Since I didn't have any sights mounted on the G&G ESG B-10 2.0 Gas Airsoft Shotgun for this test, I relied on winging it by aiming slightly to the left to compensate for the spread. The shotgun fired reliably through the entire magazine, giving about 15 or so pulls of the trigger in the 5-round burst mode with a few 10 round burst shots added in. You will immediately know when you are out of ammunition or gas because the gun makes a noticeably different, very quiet sound when firing empty, which is a helpful audible cue during a match.

View fullsize

Overall, the G&G ESG B10 2.0 is a lot of fun and functions exactly as a close-quarters BB sprayer should. The trigger pull is on the heavier side, but it feels good and adds to the robust handling of the gun. The bullpup design makes it incredibly maneuverable for indoor CQB fields. While this review captures the core performance of the shotgun based on this specific field test, it's just a fragment of what this platform can do. You might consider exploring different optic setups on the top rail, experimenting with M-LOK foregrips, or even looking into HPA setups to unlock different aspects of its performance and allow for new play styles.

In terms of how many rounds actually hit the target? Well it’s hard to say, lots missed for sure! That’s not really the point of this type of close quarters shooter, as you want rounds to speed out and hit as many people as possible, so I would say the G&G ESG B-10 2.0 Gas Airsoft Shotgun worked as intended here.

You can find the G&G ESG B10 2.0 Gas Airsoft Shotgun, along with plenty of extra magazines, gas, and BBs, at:

• Buy the G&G ESG B-10 2.0 Gas Airsoft Shotgun in Canada

• BuyAirsoft Rifles in the US

Be sure to check out the video version of this review, and you can follow the content on YouTube, Vimeo, Facebook, Instagram, and Twitter!

View fullsize

Today, we are putting the Specna Arms SA-F249 to the test. If you haven't seen one yet, be sure to check out the detailed tabletop review and the outdoor shooting video I've already posted. Today, however, is all about the hard numbers. We are bringing it into the indoor sea can to check the chronograph performance and see what kind of accuracy we can squeeze out of this absolute beast on paper. Let's get right to it.

Chronograph Velocity Test

To start things off, I loaded up some quality 0.25g airsoft BBs to run through the chrony. This setup currently has a standard voltage adaptor, for the LED lighting system though my usual one died on me, so I’m running an adjustable voltage adapter.

After a brief, accidental full-auto burst (remember, this is a support weapon designed to lay down cover!), we dialed it in for some attempted single shots (super short trigger pulls) to get our baseline velocity readings.

Chronograph Results (0.25g BBs):

• Shot 1: 363 fps

• Shot 2: 364 fps

• Shot 3: 365 fps

• Shot 4: 362 fps

• Shot 5: 363 fps

• Shot 6: 365 fps

The consistency here is phenomenal. We are sitting right in that 363 to 365 fps sweet spot. For an AEG out of the box, seeing variance of only a couple of feet per second between shots is a testament to the internal air seal and overall build quality.

Full-Auto Accuracy Test

With the velocity dialed in, it was time to set up a paper target downrange. Because this is a sport based automatic weapon, there's no semi-auto selector that I could locate, it's meant to be fired in full auto, and that’s exactly how we tested it.

Instead of the massive 1500-round box magazine it comes with, I opted to run a standard AR-15 style magazine for this indoor test. I locked it in, aimed just below the center of the target, and let the spring unwind until the mag the spring could not push anymore Airsoft BB’’s out, dumping roughly 50 to 75 rounds in one continuous burst.

View fullsize

The Results: Absolutely incredible. For a full-auto dump of that size, you would normally expect the BBs to spray across the paper. a little bit Instead, the Specna Arms SA-F249 punched a jagged, blown-out hole right through the target, resulting in a remarkably tight 2-inch grouping.

To pump that many rounds into such a condensed area on full auto is outstanding. It proves that this gun isn't just about suppressing fire; it provides highly accurate, concentrated fire downrange.

Final Thoughts

The Specna Arms SA-F249 is an incredibly impressive piece of kit. It delivers laser-like consistency on the chronograph and lays down surprisingly tight groupings in full auto. If you are looking for a support weapon that doesn't compromise on accuracy, this one needs to be on your radar.

Where to Buy: If you want to pick one of these up for yourself, or check out our other gear, head over to our stores:

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

Thanks for tuning in and supporting the channel! Be sure to like, subscribe, and follow us for more reviews and shooting tests across YouTube, Rumble, Vimeo, Facebook, Twitter, and Instagram.

Take care, and we'll see you in the next one!

View fullsize

Today, we are checking out the second-generation Lil' Sure Shot Annie Oakley BB Rifle. This is essentially a Red Ryder-styled, spring-powered BB rifle.

If you are interested in seeing how this looks up close along with the specifications and details, make sure to check out the table-top video. Today is going to be all about shooting it.

Chronograph Velocity Test

To get started, I needed to warm up the chrony, which took a little bit of troubleshooting. I had an ongoing voltage issue with my chronograph lighting and had to use a voltage regulator set to almost exactly 7 volts to get it to work properly without a proper adapter.

Once the chrony was up and running, I put several rounds through the rifle to test the velocity. The velocity remained pretty consistent in the mid-300s, with shots recording at 341, 340, 333, 329, 334, and 332 fps. averaging out at 334.

View fullsize

Target Accuracy Performance

For the accuracy portion of the test, I set up a paper target 30 feet down range. Here is how the rifle performed:

• Grouping: After firing about 10 shots, the rifle got just over a two-inch grouping.

• Placement: The shots were well-centered from left to right, though it shot a little high even when aiming just under the bullseye. I noticed a few stray BBs came back, which happens if they hit metal instead of the cloth backboard, causing some high flyers. (This could of been me as the bulk of the shots all grouped really nicely)

• Sights & Adjustability: It can be a little tough on the eyes aiming black front and rear sights on a target when you need readers for most things, which may have contributed to some of those shots hitting slightly higher. You can adjust the elevation slightly by moving a little piece on the sight backward and forward to raise or lower it. The rifle also features a dovetail, allowing you to mount a nice optical sight or a red dot.

Trigger Pull & Feel

• Pull Weight: The trigger pull comes in at around 5 to 6 pounds.

• Action: It is fairly short with a pretty predictable break.

• Usability: It requires a little effort, but it is not a super hair trigger, making it perfect for youngsters who are just starting out with shooting.

Conclusion

Overall, the Annie Oakley Lil' Sure Shot delivers exactly what you want out of a classic, Red Ryder-styled spring-powered BB rifle: it's straightforward, reliable, and just plain fun to shoot. While you aren't going to get competition-level precision out of a smoothbore BB gun, holding a solid two-inch grouping at 30 feet and putting out very consistent mid-300s fps velocities proves that it is more than capable of handling your everyday plinking or indoor target practice.

What really makes this rifle shine is its accessibility. With a predictable 5 to 6-pound trigger pull that requires deliberate effort without being a super hair trigger, it is a fantastic option for youngsters who are just learning the fundamentals of shooting. Plus, the inclusion of a dovetail mount means there is room to grow with the shooter, you can easily slap a red dot on there if the standard black iron sights prove a bit too tough on the eyes against various target. If you are looking for an entry-level plinker that performs right where it should, this second-generation Lil' Sure Shot is a great place to start.

If you want to pick one of these up, links are in the description to buy in both Canada and the US.

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

View fullsize

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol takes the already popular P320 platform and adds a more tactical, competition-inspired look with the Spectre Comp styling. In this Field Test Review, I focused mainly on real-world shooting performance including velocity, accuracy, trigger feel, blowback action, and overall handling. If you want all the detailed specifications and close-up overview footage, make sure to also check out my Table Top Review video for this model.

For this test I used standard Sig Sauer lead pellets, estimated around 7–8 grains rather than lightweight alloy pellets, giving a more realistic idea of what shooters can expect during normal use. Despite some chronograph frustrations during testing, the pistol delivered fairly consistent velocities once everything settled down. Average readings for my five shots through the Chronograph came in at 270 FPS, with highs reaching about 286 FPS during the initial shots and my slowest shot was 260 FPS. Considering the cooling effect common with CO2-powered airguns, the consistency was actually quite respectable for a blowback pellet pistol.

Accuracy testing was performed at 30 feet using a standard paper target. I fired a full 10-shot group and overall results were solid for a blowback pellet pistol with a higher-capacity belt-fed magazine system. Most shots grouped within roughly 2 inches, although the full spread opened up closer to 2.5–3 inches when including a couple lower shots likely caused by slight velocity variation from CO2 cooldown. Horizontal consistency was very good, with only a slight tendency to drift left. For a rapid-fire capable CO2 pistol with blowback, the accuracy was more than acceptable.

View fullsize

One thing worth mentioning is the trigger feelof the Sig Sauer Spectre Comp. Since the trigger system also advances the pellet belt during firing, there is naturally a bit more friction and a slightly longer pull compared to some rotary magazine designs. Even so, the trigger never felt excessively heavy or unpleasant. Rapid follow-up shots were still easy to manage, and the realistic blowback action adds a lot to the shooting experience.

The 20-round belt-fed magazine system is one of the biggest advantages of the Spectre Comp over many traditional rotary magazine pellet pistols. Instead of dealing with smaller 8-shot or flip-around style magazines, you get a much more enjoyable shooting session with fewer reload interruptions. Combined with the realistic weight, solid balance, and satisfying blowback recoil impulse, this pistol ends up being a very fun and practical option for target shooting and action-style plinking.

If you are looking for a realistic training-style pellet pistol that combines blowback action, higher magazine capacity, and solid handling characteristics, the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol is definitely worth checking out. It offers a nice balance between realism and shooting fun while still delivering respectable accuracy and consistency for casual target shooting.

You can find more information about Airguns, BB guns, Pellet guns, Airsoft guns, Blank guns, and accessories over at Replica Airguns Canada and Replica Airguns US.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer P320 Blowback Pellet Pistol in the US

View fullsize

The Umarex T4E TP50 Gen 2 continues to impress as one of the more powerful and practical compact less-lethal pistols currently available. In this field test review, I tested the all-black version using .50 caliber rubber-steel core rounds to see how it performs in terms of velocity, energy, and real-world accuracy. The black version is essentially the same as the orange-marked variant, just marketed a bit differently, with a more tactical appearance that may appeal to those looking for a serious training or home defense-style option.

For ammunition, I used the steel-core rubber balls rather than standard solid rubber rounds. These projectiles are slightly heavier and seem to carry noticeably more energy downrange without sacrificing too much velocity. In my opinion, they are probably some of the best ammunition choices for these types of pistols if maximum impact energy is your goal.

Velocity testing through the chronograph produced some very impressive numbers. The TP50 Gen 2 delivered readings of 319 FPS, 304 FPS, 310 FPS, 300 FPS, and 308 FPS, averaging just over 308 feet per second. With the steel-core rubber rounds weighing approximately 2.7 grams, the pistol produced roughly 12-13 Joules of muzzle energy using the Steel Core Rubber Balls but would have been closer the projected 15 Joules with all Rubber Balls, which is extremely respectable for a compact CO2-powered .50 caliber launcher. You can really hear and feel the power when firing this pistol, and it even generates noticeable recoil-like kick during shooting.

View fullsize

Accuracy testing was performed from 30 feet downrange using the six-round internal magazine. Paintball-style projectiles are naturally less precise than pellets or BBs due to their softer construction, surface ridges, and aerodynamic inconsistencies, but the Umarex T4E TP50 Gen 2 still delivered surprisingly solid grouping performance. After adjusting my aim slightly low due to the pistol shooting a little high initially, the remaining shots grouped well into the center portion of the target and produced clean, sharp holes through the paper target with about a 3 inch grouping.

In practical terms, this pistol clearly delivers enough impact energy to strongly discourage an attacker or aggressive threat. The steel-core rubber rounds hit extremely hard, especially considering the combination of high velocity and projectile mass. While heavy clothing would certainly absorb some impact, anyone wearing lighter clothing would absolutely feel these rounds. The all-black appearance also adds to the realistic tactical styling, which alone could act as a deterrent before a shot is ever fired.

Overall, the Umarex T4E TP50 Gen 2 proved to be accurate enough for close-range defensive-style use, delivered excellent power, and offered reliable operation throughout testing. The trigger feels good, the pistol handles nicely, and the performance with steel-core rubber ammunition was impressive across the board. For anyone looking for a compact CO2-powered less-lethal launcher with strong energy output and solid build quality, the TP50 Gen 2 is definitely worth considering.

You can find the Umarex T4E TP50 Gen 2 and other Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and accessories at:

• Buy the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol in Canada

• Buy Paintball Guns in the US

Despite a rocky start, my test with the Specna Arms SA-F249 machine gun did yield some eventual results. Initially, I set up multiple cameras (Three Sony Cameras, Insta360 X4, DJI Neo 2, Looki L1, Meta Ray-ban Gen 2) and planned a full-auto session aiming to empty the 1500-round magazine on a boat load of water filled cans. Unfortunately, the magazine’s feed malfunctioned, preventing the gun from firing as intended. Even so, I pivoted, swapping in an AR-15 magazine and still managed to get some satisfying shots on target. at the end of the video

It’s all part of the process: sometimes you get a lemon, but that doesn’t mean the day is totally lost. We did confirm that the gun itself works very well, and I hope to be revisiting this test with a new 1500 round magazine to give it a proper go. For now, at least we got a bit of action on those water-filled cans. Stay tuned for a follow-up, because I’m determined to show this LMG at its full potential!

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

Replica Airguns takes a step back in time to share how everything began, long before the channel, website, and stores grew into what they are today. The journey started around 2006, just a year after YouTube first launched. At the time, online video was still in its infancy, with low-resolution clips, shaky footage, and minimal production quality being the norm.

Mike created the very first video simply for fun. It featured a modified Umarex Walther PPK BB gun that Mike had altered for full-auto shooting. Edited in iMovie on a Mac and uploaded in low resolution (under 640×480), the video wasn’t intended to be anything more than a casual experiment. However, after sitting online for a few months, it unexpectedly reached around 100,000 views, an impressive number for that era, when far fewer creators were uploading content and viral videos were rare.

That early success revealed something important: there was real interest in Airguns and BB gun content. From there, Mike purchased more Airguns (to his wife’s disapproval), more videos were created, and the foundation for a focused channel began to take shape. A few years later, the project became more serious, evolving into a dedicated platform and eventually transitioning into the Replica Airguns brand you see today!

Over time, the brand expanded into multiple websites, ReplicaAirguns.com, ReplicaAirguns.ca, and ReplicaAirguns.us, along with a large video library. Although the channel faced setbacks, including being removed from YouTube at one point, the content continued to live on through platforms like Vimeo and Rumble. Now, with nearly all videos being restored back to YouTube, the library is close to fully rebuilt.

The original video that started it all was thought to be lost for years, buried on old storage drives. Recently rediscovered, it has been enhanced using modern AI tools to improve clarity while still preserving its original look and feel. Despite its dated quality, it represents the true starting point of the Replica Airguns journey.

For viewers interested in Airguns, including BB guns, Airsoft, Pellet guns, and more, the channel and websites continue to offer extensive content and product availability across both Canadian and U.S. online stores.

View fullsize

In this Video I perform the field test shooting review for the SIG Sauer P229 pellet pistol. If you’re interested in the full specifications, features, and a closer look at the pistol itself, make sure to check out my tabletop review where I go over all the details on this gun.

For today’s test I’m going to be shooting SIG Sauer lead pellets, roughly 7–8 grains. Because these are standard lead pellets and not lightweight alloy pellets, they’re not going to produce the highest velocity numbers this pistol can achieve. With lighter alloy pellets you will definitely see faster readings.

You could also shoot steel BBs through this gun, but BBs sometimes don’t seal quite as tightly in the barrel as pellets do. When that happens, some of the CO₂ can slip around the BB as it travels down the barrel which can actually reduce velocity slightly. BBs also generally don’t carry energy to the target as well as pellets, so pellets are usually the better option for accuracy and performance.

With these pellets, I’m expecting roughly around the 300 FPS range, so let’s see how it actually performs.

View fullsize

Velocity Test

For the velocity portion I’m going to put five shots through the chronograph to see what kind of numbers we get.

Chronograph Results:

Shot Velocities: 320 FPS - 296 FPS - 303 FPS - 286 FPS - 277 FPS (Average of 296 FPS)

As you can see, the readings are right about where expected, generally around the 300 FPS mark, with a slight drop toward the last shot. That’s fairly typical for CO₂ powered blowback pistols, since some of the gas is being used to cycle the slide.

View fullsize

Accuracy Test:

For the accuracy portion I’ve set up my paper targets at 30 feet downrange.

The SIG Sauer P229 pellet pistol uses a dual rotary 8-round magazine, so instead of the usual 10 shots I normally use in these tests, I’m going to fire eight shots to keep things simple and consistent.

One thing I like about this pistol is the trigger operation. When you start the trigger pull, the first stage rotates the rotary magazine. This part of the pull is very light and smooth, so there’s very little double-action feel. Once that’s done, you reach the single-action hammer release, which is nice and predictable.

To keep the trigger as light as possible I’m going to pre-cock the hammer, which eliminates most of that initial rotation effort and gives you a much lighter break.

View fullsize

Accuracy Results:

After eight shots at 30 feet, the group measured approximately 1.5 inches.

That’s actually pretty good accuracy for a blowback pellet pistol.

The pistol was shooting slightly low out of the box, roughly about two inches low and just a little to the left at this distance. My aim point was just underneath the bullseye so I could see the target above the sights.

The sights on this pistol are fixed, so you can’t adjust them directly. The easiest solution is simply to aim slightly higher and a bit to the right if you want to hit the bullseye consistently at this range.

View fullsize

Sight Upgrade Options:

If you want more precise adjustment, you do have a couple of options:

• Install a slide-mounted red dot using the removable optics plate

• Add a laser to the accessory rail under the barrel

Either of those options would allow you to dial in your point of aim exactly where you want it, which is a nice upgrade path for this pistol.

View fullsize

Shooting Impression

The trigger feels really good, and the blowback action is solid and snappy, though not overly fast.

The slide actually has a bit of that heavier, slightly slower 1911-style blowback feel, which I personally like. Some blowback pistols cycle extremely quickly and can feel a bit artificial, but this one feels more substantial because of the heavier slide weight.

The pistol itself also has good weight and balance, coming in a bit over two pounds, giving it a very realistic feel in the hand.

Overall, it’s a solid, well-built pellet pistol, and like many of the SIG Sauer Airgun products, it feels like a lot of attention went into the design.

SIG doesn’t actually manufacture these Airguns themselves, they design them and partner with manufacturers to produce them, but the quality across their pellet pistols and rifles has generally been very good.

View fullsize

Final Thoughts

The SIG Sauer P229 CO₂ blowback pellet pistol delivers:

• Around 300 FPS velocity with lead pellets

• Realistic blowback action

• Good weight and handling

• Approximately 1.5 inch accuracy at 30 feet

• Multiple options for optic or laser upgrades

Overall, it’s a very enjoyable pistol to shoot and a solid option if you’re looking for a realistic blowback pellet pistol.

Don’t forget to subscribe, and check us out on Facebook, Twitter, and Instagram.

If you’re interested in buying Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and Accessories, be sure to visit our online Canada and US Stores.

Available in our Canada Replica Airguns Store. Also check out:

• Buy the Sig Sauer P229 in Canada

• Buy the Sig Sauer P226 in the US

View fullsize

In this Field Test Shooting Review I’m taking a look at the Umarex T4E TC68 .68 caliber paintball / less-lethal marker to see how it performs in terms of velocity, accuracy, and overall shooting experience.

I have already done a Table Top Review covering the specifications, features, and overall purpose of the TC68, so make sure to check that video out if you want the full breakdown of the gun itself. This field test review is focused strictly on real-world performance.

For this test the TC68 has been de-restricted, meaning the adjustment screw has been modified slightly so it can reach its full potential. Even with this adjustment it should still remain legally compliant here in Canada, since the velocity will remain under the 500 fps threshold.

For ammunition I used .68 caliber nylon rounds:

• Black rounds: approximately 2.8 grams

• Yellow rounds: approximately 2.6 grams

The TC68 in this test is powered using dual 12-gram CO2 cartridges, rather than the larger 88-gram CO2 cylinder, which will affect both shot consistency and total shot count.

View fullsize

Velocity Testing

For the velocity portion of the test I fired several shots through my chronograph.

Chronograph readings were somewhat tricky to capture at first, but once everything started working correctly I was able to record several shots.

Example readings included:

• 476 fps

• 463 fps

• 453 fps

• 445 fps

The velocity dropped slightly during the test, which is expected when using dual 12-gram CO2 cartridges, as they cool down fairly quickly during rapid shooting.

The slightly heavier 2.8-gram black rounds were also used for some of the shots, which can contribute to minor changes in velocity compared to the lighter 2.6-gram rounds.

Even with that drop, performance was still strong and suggests the TC68 could likely reach high-400 fps velocities with a fresh CO2 setup or an 88-gram CO2 cylinder, which provides much greater gas capacity and improved consistency.

View fullsize

Accuracy Testing

For the accuracy portion of the test I set up a paper target down range and loaded roughly 20 rounds into the magazine.

The first test consisted of 10 shots in semi-automatic mode using the heavier black nylon rounds. A red-dot optic was installed on the TC68 for aiming, though it had not been sighted in or adjusted beforehand.

Results were quite respectable for a marker shooting heavy .68 caliber rounds.

• Overall grouping was approximately 4 inches

• Most shots landed within a 2.5–3 inch cluster

• One shot landed slightly low outside the main group

Considering the optic was not adjusted and this was essentially a right-out-of-the-box test, the accuracy was quite good.

Full-Auto Shooting Test

After the semi-auto accuracy test I attempted a full-auto burst test, but quickly discovered the CO2 had been depleted.

After installing fresh CO2 cartridges, the full-auto test was repeated with approximately 20 rounds loaded.

The TC68 does not have an extremely fast rate of fire, but it still delivers a solid stream of rounds when the trigger is held down.

View fullsize

During full-auto fire:

• The gun remained fairly controllable

• Rate of fire was moderate but effective

• CO2 cooling became noticeable during sustained bursts

A fresh target confirmed that the TC68 was still accurate enough for defensive-style shooting, keeping the majority of rounds within the main target area even during burst fire.

Power and Energy

Using approximately 2.8-gram nylon rounds traveling around 475 fps, the TC68 is producing significantly more energy than its factory-rated 16-joule output. Closer to 30 joules!

The modification performed simply allows the power adjustment screw to reach its full depth, allowing the marker to operate closer to its maximum potential.

While exact energy figures will depend on projectile weight and velocity, the TC68 in this configuration appears capable of producing considerably higher energy levels than stock, while still remaining under the 500 fps legal limit in Canada.

Shooting Impressions

Overall the Umarex T4E TC68 proved to be a solid and reliable platform during testing.

Some observations from the field test:

What I liked

• Strong velocity potential

• Good accuracy for a .68 caliber marker

• Full-auto capability for rapid follow-up shots

• Compatible with multiple CO2 power options

Things to consider

• Dual 12-gram CO2 cartridges cool down quickly

• Larger 88-gram CO2 cylinders will provide better consistency

• The gun includes multiple safety mechanisms that require familiarity

The TC68 includes three levels of safety, which helps prevent accidental discharge but does require some practice to become comfortable with the controls.

View fullsize

Final Thoughts

The Umarex T4E TC68 performed well in this field test.

Velocity was strong, accuracy was respectable for a .68 caliber marker, and the full-auto capability adds an interesting dimension to the platform.

With proper setup and a fresh CO2 source, the TC68 has the potential to deliver high-energy shots while still remaining within Canadian legal limits.

Overall it’s a very capable paintball / less-lethal marker and definitely an interesting option for those looking for a high-power .68 caliber platform.

• Buy the Umarex T4E TC 68 Less Lethal Paintball Rifle in Canada

• Buy Paintball Guns in the US

View fullsize

We didn’t catch this one at the Steambow booth, we were out at the SHOT Show indoor range checking out Steambow again, Tyler walked us through their brand-new-for-2026 B08: a magazine-fed .68 caliber ball launcher/crossbow that’s just starting to hit availability.

• New B08 .68 cal “ball launcher” platform (2026): This is a .68 caliber system designed to run .68 spherical projectiles (paint, foam/nylon, and pepper/irritant-type balls were all discussed as compatible options, depending on local rules).

• 8-shot, removable, pre-loadable magazine: The B08 uses a spring-fed 8-round magazine that inserts at the front. Tyler’s demo made it clear you can pre-load multiple mags and keep shooting quickly.

• Simple, repeatable action (easy to learn fast): The manual of arms is very “repeat-and-go”: load the mag, cock it, shoot, then cycle and repeat. Steambow describes the system as their familiar AR-Series quick-tilt/quick-clamp style for fast reloading.

• Ships mild, but can be upgraded for more power: The one I tested was using a 35 lb limb, but it’s built to accept other AR-Series limbs (stronger options sold separately). Tyler specifically said swapping to a much heavier limb can turn it into a high-velocity setup (he referenced up to a 150 lb limb and around 300 fps in his talk).

• Projectile flexibility is the whole point: If you already have .68 cal paintballs or similar at home, that’s the target “ecosystem” this is built around (so long as they’re spherical).

• Important safety + legal reality check: Steambow is very explicit that once you move beyond the “low power + soft balls” envelope, the B08 can become very dangerous, they warn that harder/heavier projectiles (including steel balls) raise risks like severe injury/lethality and ricochets, and that irritant/pepper-type rounds may be legally restricted depending on country.

Tyler’s range demo made the main selling points obvious: magazine speed, easy operation, and a huge range of .68 ball options. If we can get it lined up for Canada, it looks like a very versatile multi use platform, especially for anyone who wants .68 cal fun adn then some, without relying on CO2 or HPA.

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.

View fullsize

I had the chance to take the KWC 18 CO2 Blowback BB Pistol out for some shooting today to see how it performs. It’s a Glock-styled 4.5mm steel CO2 BB pistol with full blowback and selectable semi and full auto. It’s not an officially licensed Glock, but if you own (or have shot) Glocks, the controls and overall feel will be instantly familiar.

I’ve already done a close-up tabletop video for the KWC 18 covering specs and details, so if you want the up-close visuals and feature breakdown, make sure to check that out first.

For this session I concentrated solely on performance: a quick 5-shot chronograph run in semi-auto to record velocity, a 10-round semi-auto group at 30 feet, and then a full-auto mag dump to get a practical feel for controllability and “real world” accuracy—right out of the box (no tuning).

Velocity Testing (Chronograph)

For the chronograph testing, I ran five shots in semi-auto with a brand new CO2 in the magazine. The numbers came in at 293, 294, 282, 290, and 282 fps, for an average of about 288 fps. The spread was tight and the pistol felt extremely “snappy” while shooting, there’s a lot of pop in the blowback and you can feel it cycling hard.

One important note: this is a single-action-only style system, so you do need to rack the slide to cock it before it’ll fire (ask me how I know…).

View fullsize

Accuracy Testing (30 Feet)

For accuracy, I put a paper target out at 30 feet and fired 10 rounds in semi-auto. After a quick adjustment (the pistol was hitting very low at first), I aimed higher and got a roughly 3-inch grouping. The group was well centered left-to-right, but the pistol was still shooting noticeably low overall.

This is the kind of thing you’d simply keep in mind while shooting, and depending on the setup, you may be able to tweak elevation a little (but with steel BBs at short range, don’t expect miracles).

Full Auto (Mag Dump)

Then I loaded up and did a full-auto mag dump. As expected, it was basically spray-and-pray at 30 feet. The rate of fire is insane, and between that and the strong blowback, it was extremely difficult to keep rounds on target. I may have only landed a couple hits on paper.

Final Thoughts

All told, the KWC 18 is a really fun Glock-style blowback BB pistol if you want something that feels familiar in the hand and delivers a crisp trigger with serious recoil-like blowback. In semi-auto it’s manageable (even if it shoots low out of the box), but in full auto, at least at 30 feet, it’s more about the fun factor than practical accuracy.

• Buy the 18 CO2 Blowback Steel BB Pistol in Canada

• Buy 18 CO2 Blowback Steel BB Pistol in the US store

Today we’re looking at the A&K M1873R (the R version). There are a few different versions of this rifle in the lineup (some more compact, some more full-length), and the manual actually shows the variations so watch the video where I point that out.

This is a Table Top Review only, so we’re focusing on specs, details, and a walk-around. I was hoping to follow this up quickly with a Shooting / Field Test Video, but my sample has an issue: it’s leaking gas when I try to fill it (I tested with propane/green gas). I’ll need to sort that out first (repair or replacement), so the field test will have to wait until that’s resolved.

Here some links where you can buy the A&K M1873R in our Canada Replica Airguns and US Replica Airguns Stores

View fullsize

Specifications

• Manufactured By: A&K – Made in China

• Type: Gas-powered airsoft lever action rifle (non-blowback)

• Ammunition: 6mm plastic airsoft BBs

• Power Source: Green gas / propane (internal gas reservoir)

• Action: Lever action / manual cycle (one shot per lever cycle)

• Capacity: 25-round internal magazine (side loading gate)

• Velocity: Approx. 350–400 FPS with 0.20g BBs (temperature/BB weight dependent)

• Hop-Up: Adjustable hop-up system

• Build / Materials:

  • Real wood stock

  • Metal receiver and barrel assembly

  • M-LOK handguard (tactical “modern western” styling)

  • Top Picatinny rail (optics ready)

  • Brass butt plate

• Controls / Features:

  • Enlarged lever loop (glove-friendly)

  • Integrated lanyard ring / sling hoop

• Weight: 4.8 lbs (2.18 kg)

• Overall Length: 27.2 inches (69 cm)

• Barrel Length: 8 inches (20.3 cm)

In the Box

• A&K M1873R rifle

• Mock suppressor (cosmetic)

• Speed loader (you’ll want this for loading the internal magazine)

• Tools / Allen keys

• Small bag of airsoft BBs

• Simple 1-page manual

View fullsize

Manual Notes: Different Versions

The manual shows several versions of this lever action platform. Some are more compact and some are more traditional full-length lever rifles. There’s also a version that appears to run without the longer front barrel extension setup, which, honestly, is the version I’d personally lean toward since the included mock suppressor is mostly cosmetic.

Walk Around

This is a really sharp-looking rifle, it has that classic lever gun vibe thanks to the real wood stock and brass butt plate, but then it mixes in a modern tactical look with the M-LOK hand-guard and top Picatinny rail.

A few key points when handling it:

• No sights included: there are no iron sights on this rifle, so you’ll want to add your own optic (red dot, scope, or rail-mounted irons).

• M-LOK handguard + top rail: lots of freedom to build the look you want, keep it clean, or “tactical western” it up with accessories.

• Internal mag / side loading gate: loads like a real lever gun, through the side. The external profile stays clean (no big mag hanging out).

• Enlarged lever loop: easier to run with gloves or bigger hands, and it just looks right on this style of rifle.

• Sling / carry: it includes a metal lanyard ring / sling hoop, so carrying it is easy if you want it strapped while moving around.

View fullsize

Mock Suppressor and Gas Fill

The included “suppressor” is mainly for looks. It does have an orange front, and it doesn’t function as a suppressor (it’s not extending the inner barrel either).

Important practical detail: you’ll need to remove the mock suppressor to access the gas fill valve, which means you’ll want to keep the included tool (or something similar like a washer/coin that fits) with you.

Issue With My Sample: Leaking Gas

My review sample is leaking at the fill area. It looks like someone may have tried to seal it (there appears to be silicone or residue), and there are a few scratches that make me suspect this unit could have been a return. I tried tightening it, but it still leaks and it may be stripped.

This is not what you should expect out of a normal new unit, but I want to mention it because it’s the reason I’m holding off on the field test until it’s fixed.

View fullsize

Pros

• A lever action gas Airsoft rifle is just plain fun (and there aren’t tons of these around)

• Classic look with real wood + brass butt plate, but still has modern utility with M-LOK up front

• Feels solid in the hands (doesn’t feel cheap)

• Top Picatinny rail makes optics easy (and you’ll want optics since there are no sights)

• 25-round internal magazine keeps the outside profile clean

• Enlarged lever loop is great for gloves or cold-weather play

• Lanyard ring / sling hoop makes it easy to carry

• Speed loader makes loading fast once you get the hang of it

• You can run it more compact by skipping the mock suppressor (it’s optional)

Cons

• The internal 25-round magazine is awkward to load without the speed loader, don’t lose it

• Green gas performance is temperature sensitive, which can affect consistency in colder weather

• Not a fast follow-up shooter, you must work the lever for every shot (part of the charm, but it’s a limitation)

• You’ll need to add your own sights/optic (none included)

• The included mock suppressor must be removed to fill gas, which adds a little extra handling

View fullsize

Final Thoughts

The A&K M1873R is a really cool “modern western” mashup, classic lever action styling with real wood and brass, but with M-LOK and a top rail so you can build it out however you want. Lever guns force you to slow down and actually enjoy the shooting experience, and that’s a big part of why they’re so popular (even outside of Airsoft).

Once I get the leak issue sorted on my sample, I definitely want to do the field test, because this is exactly the kind of unique platform that deserves to be shot and evaluated properly. On the table, it looks great, feels solid, and offers a lot of customization potential, you just have to go in knowing it’s lever-action manual cycling, it uses green gas/propane (so temperature matters), and you’ll need to add your own optic since there are no sights included.

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US