We are halfway through September, and another unannounced delivery just showed up at the door. This box was surprisingly compact but incredibly dense, hinting at a hefty amount of possible ammunition inside. Cracking it open revealed a massive 4,000-count bottle of BBs and an updated classic from Crosman.

Gear Stock 4.5mm Copper-Coated Steel BBs

The sheer weight of this package came from a bulk 4,000-round bottle of Gear Stock 4.5mm steel BBs. These specific rounds feature a copper coating, which looks great but comes with a few historical caveats.

• Copper vs. Zinc: In my experience, copper-coated BBs can tarnish over time. Unlike zinc, which stays relatively clean, older copper coatings can oxidize and leave a dark, powdery residue on your hands and inside your airgun's barrel.

• Quality Check: If you burn through your ammo quickly, the tarnishing won't be an issue. We will have to see if modern manufacturing has improved the coating durability on this Gear Stock batch, but I typically lean toward zinc-coated BBs for long-term storage and cleaner shooting.

• Buy Gera Stock BB’s in Canada

• Buy Gear Stock BB’s in the US

View fullsize

The Crosman 2240 XL .22 Caliber CO2 Pellet Pistol

The main event in this box is the Crosman 2240 XL. The 2240 platform has been a staple in the airgun community for decades, and the XL version finally addresses the most common pain points shooters had with the base model out of the box.

• Core Specs: The 2240 XL is a CO2-powered, bolt-action, single-shot pistol chambered in .22 caliber. It weighs in at 1.8 pounds, features a rifled steel barrel, and utilizes a standard 12-gram CO2 cartridge.

• The Metal Breech Upgrade: The standard 2240 and its multi-pump cousin, the 1322, utilize a plastic breech. Mounting an optic on those older models requires clamp-on barrel adapter rings, which can easily twist out of alignment. The 2240 XL ships with an upgraded all-metal breech featuring a milled 11mm dovetail rail, allowing for a rock-solid red dot or scope mount straight from the factory.

• Threaded Muzzle: The front of the barrel has a threaded muzzle cap. You can unscrew the tip to attach 1/2" UNF aftermarket compensators or moderators, adding another layer of customization.

• Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• Buy Pellet Pistols in the US

View fullsize

Customization and Practical Application

Because the 2240 XL features a dovetail rail instead of iron sights, it is built specifically for optics. This plays perfectly into the massive aftermarket support for Crosman’s 22xx and 13xx platforms.

I own a heavily modified "backpacker" setup on one of my personal Crosman .22s, featuring a skeletonized rear shoulder stock and a magnified scope. At sub-500 FPS, a .22 caliber pellet is highly effective for close-range pest control. When dealing with nuisance animals like crows attacking songbirds, an ultra-high-velocity pellet will often pass straight through the target, wasting its kinetic energy. A heavier .22 pellet moving at moderate speeds dumps its full energy upon impact, providing a much more immediate and humane dispatch.

The full tabletop and field test shooting videos for the Crosman 2240 XL are coming up next. Make sure you are subscribed on Rumble, Vimeo, X, Threads, or TikTok to catch the full performance breakdown when it goes live.

View fullsize

Hey everybody, Michael here from Replica Airguns with another field test shooting video! Today, we finally got our hands on another A&K M1873R M-Lock Lever Action Airsoft Gas Rifle. The first one we received had an issue with a leaking valve that someone tried to fix with some goop, so I got a return item to demo instead. For this session, we are strictly focused on performance: seeing how this model handles when we actually put some rounds downrange. I am using .25 gram Airsoft BBs and filling it up with propane gas. We are going to put this gun through its paces, but right out of the gate, we're dealing with some quality control quirks. Also make sure to checkout my Table Top video for the A&K M1873R for details specifications and close up video.

Chronograph and Velocity Testing

Starting things off with the chrony test, I filled the gun up with propane. It's worth noting right away that preparing this gun is frustrating; you cannot fill the gun with gas while the front mock suppressor is attached. You have to take a coin, unscrew it for 30 to 60 seconds, fill the gas, and put it back on. After finally getting it loaded up, let's see how the M1373 R version performed:

• Shot 1: 340 FPS

• Shot 2: 320 FPS

• Shot 3: 335 FPS

• Shot 4: 328 FPS

• Shot 5: 337 FPS

• Shot 6: 335 FPS

View fullsize

As you can see, the numbers were fairly consistent, keeping us comfortably in the 320 to 340 FPS range with a 7 shot average of 331 FPS. It shoots right around where you want it to be for an Airsoft Rifle of this type, though you can hear the gas starting to run a bit low if you push too many rounds through it without topping it off.

Accuracy Downrange at 30 Feet

Next up, I stepped back to my standard 30-foot mark to see what kind of grouping the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle could pull off on a fresh paper target. I put about 10 or 11 rounds through it for this string. Because of the way it was hitting, I intentionally aimed towards the bottom of the target ring to compensate for it shooting high the way the red dot was sighted in.

Shooting this gun requires some effort. The trigger is honestly quite heavy for what is essentially a single-action pull, so you really have to crank it. Despite the heavy trigger, the end result was a fairly decent 2.5 to 3-inch grouping. As long as you know where to aim or have your sights dialed in, it's actually not a bad shooter downrange.

Shooting Feel and Quality Control Issues

The physical shooting experience is where this A&K replica really struggles, largely due to lacking quality control. Out of the box, a small retention spring meant to keep the loading port door closed, fell out of the breech area. Because of this, it misfeeds, and the BB stays in the bottom part of the breech unless you give the lever an intentional, forceful push to load it correctly.

The other major headache is the previously mentioned mock suppressor design. Having to take a tool or coin to remove it just to fill it up with gas makes no sense for field use. They really should have included an open-front mock suppressor or an extender piece so you can reach the valve easily without a teardown process every 20+ shots or so.

View fullsize

Final Thoughts

Ultimately, the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle is a very cool-looking modern lever action rifle, but I really wish it didn't have these out-of-the-box issues. Between the two models I looked at, both had problems, from leaking valves to a finicky loading door. The unnecessary 60-second hassle just to fill the gas tank holds it back from being a great plinker unless you simply do not install the mock suppressor. It definitely shoots well enough and hits good FPS numbers, but you'll have to deal with some frustrating design choices and quality control along the way.

Where to Buy

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US

Thanks for tuning in! Make sure to head over and follow the Replica Airguns channels on Rumble and Vimeo. We are uploading as much content as possible, and your support means the world to us!

We’ve got yet another box on the table today for our August Mystery Unboxing. It took a while to arrive, but it was absolutely worth the wait. We’re diving into four highly anticipated products across the BB, Pellet, and Airsoft categories.

Here is a quick first look at what’s hitting the review table soon!

View fullsize

Marksman Model 1018 .177 Caliber Air Pistol

First out of the box is the Marksman 1018. This is a very budget-friendly (around $50), 1911-inspired spring-actuated pistol. It features fiber-optic sights on the front and back, making it an excellent, quiet option for basement or backyard plinking. While it can technically shoot darts and bolts, we'll be sticking to BBs and pellets for our tests.

Basic Specifications:

• Action: Single-stroke spring piston

• Caliber: .177 Caliber (BBs and Pellets)

• Capacity: 18-shot internal BB reservoir

• Velocity: Up to 200 FPS

• Weight & Length: 1 lb / 9.0 inches

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

Next up is a beauty from Umarex, the Glock 17 Gen 5 MOS. If you love ultra-realistic replicas, this is it. It features a heavy full-metal slide spring, a recessed barrel, and classic white dot sights. The "MOS" means it comes ready with all the mounting plates you need to attach your favorite red dot sights. It runs on a full-size, drop-out 17-round metal magazine and utilizes a full blowback system for ultra realistic blowback operation.

Basic Specifications:

• Action: Semi-auto full blowback, single CO2 cartridge

• Caliber: 4.5mm (.177) steel BBs

• Capacity: 17-round drop-out metal magazine

• Velocity: Approximately 300 FPS

• Weight & Length: 1.5 lbs / 7.95 inches

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

I'm incredibly excited to finally do a proper field test on this one. This is a replacement for a previous model that had a leaky loading valve. This gas-operated, "Mares Leg" style lever-action rifle is heavily modernized. It features a gorgeous real wood stock, an enlarged lever loop, a Picatinny top rail, an M-LOK handguard for accessories, and a mock suppressor on the front.

Basic Specifications:

• Action: Gas Non-Blowback Lever Action (Green Gas)

• Caliber: 6mm Airsoft BBs

• Capacity: 25-round internal magazine

• Velocity: 360 - 390 FPS (with 0.20g BBs)

• Weight & Length: 3.7 lbs / 24.5 inches

View fullsize

Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle

Finally, we have an absolute powerhouse in a tiny package: the Specna Arms SA-E10 PDW. This is a super-compact AR-style AEG with a polymer-metal build and a telescopic stock. Specna Arms goes above and beyond with the box contents on this one. Along with the rifle, you get two S-MAG mid-cap magazines, an additional M90 drop-in spring to easily lower your FPS for indoor fields, a Deans adapter, and a vertical foregrip.

Basic Specifications:

• Action: Electric (AEG) with Pre-installed MOSFET

• Capacity: Includes two 125-round mid-cap S-MAG magazines

• Velocity: 375-390 FPS (Drops to ~310-320 FPS with included M90 spring)

• Length: Minimum 505 mm (approx. 19.8 inches)

• Inner Barrel: 160 mm precision 6.03mm barrel

Stay tuned to the Replica Airguns channel, as I'll be doing dedicated tabletop and field test shooting videos for all of these very soon.

View fullsize

In this Table Top Review, we're taking a detailed look at the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. As always, this is a Table Top Review only, so there won't be any shooting in this video. However, a dedicated Field Test Shooting Video will be coming later to see how it performs in real-world use.

This is an ASG product, officially licensed by CZ, and it features authentic markings, including the 9x19 stamp. It's a modern, full-blowback airsoft replica that mirrors the real steel CZ P-10 C very closely. Manufactured in Taiwan and distributed by ASG, this model stands out with some excellent out-of-the-box features, making it a highly versatile and realistic option for airsoft shooters.

View fullsize

Specifications

• Caliber: 6mm Airsoft BB.

• Action: Semi-auto, full blowback.

• Power Source: Single 12g CO2 cartridge (Green Gas magazines are also available).

• Magazine Capacity: 22-round full metal drop-out magazine.

• Velocity: ~330 FPS (1.05 Joules) with .20g BBs.

• Weight: 1.63 lbs (730 g).

• Overall Length: 7.09 inches (195 mm).

• Construction: Metal slide, nylon/polymer frame.

• Barrel: 14mm CCW threaded outer barrel.

• Hop-Up: Adjustable (accessible via open ejection port).

• Optics Ready: Yes (optics plate pre-installed).

View fullsize

Build Quality & Design

The ASG CZ P-10 C delivers a solid mix of materials with its metal slide and nylon frame construction. The metal slide gives it a realistic, top-heavy weight and feel, while the nylon frame keeps the overall weight balanced at a manageable 1.63 pounds. The full metal 22-round magazine, which houses the 12g CO2 cartridge, adds substantial weight to the grip, giving the gun a very realistic presence in the hand.

Field stripping is incredibly simple and authentic to the real steel version—just pull down the two tabs and rack the slide forward to remove it. While the most of the frame components are mostly plastic, the heavy metal slide ensures durability where it counts.

View fullsize

Handling & Controls

This pistol is designed with ergonomics and modern handling in mind. It features mostly ambidextrous controls, including an ambidextrous slide catch and release. While the magazine release comes set up for right-handed shooters, it is completely reversible. The pistol includes a working trigger safety and comes with three interchangeable backstraps, allowing you to customize the grip size to perfectly fit your hand.

One of the standout design choices on this airgun is the hop-up adjustment. Instead of having to field strip the pistol to make adjustments, you can access the hop-up wheel directly through the open ejection port when the slide is locked back, a massive time-saver during gameplay.

View fullsize

Sights & Optics

Out of the box, the ASG CZ P-10 C is optics-ready and comes with an optics plate already installed on the slide. If you prefer to run standard iron sights, ASG includes a rear white-dot sight in the box that you can easily swap out by removing the plate. It also features a fixed white-dot front sight for quick target acquisition.

Additionally, the gun features a 14mm CCW threaded outer barrel right out of the box, hidden under a protective orange cap. This makes it instantly ready to accept a mock suppressor or a tracer unit once the cap is removed.

View fullsize

Performance Expectations

With a claimed velocity of around 330 FPS (1.05 Joules) using a 12g CO2 cartridge, it hits perfectly within standard indoor CQB limits while still offering enough power for outdoor play. Because it features full blowback operation paired with a fairly heavy metal slide, you can expect a very crisp, realistic recoil effect with every shot.

View fullsize

Pros

• Officially licensed by CZ with authentic 9x19 markings.

• Full blowback operation with a heavy metal slide for realistic recoil.

• Optics-ready out of the box with the plate pre-installed.

• 14mm CCW threaded outer barrel ready for a suppressor or tracer unit.

• Convenient hop-up adjustment dial accessible through the open ejection port (no field stripping required).

• Includes three interchangeable backstraps to customize grip size.

• Ambidextrous slide release and reversible magazine release.

• Simple and realistic field stripping process.

• Comes in a Black and Tan version

Cons

• Comes with an orange cap on the barrel, though it serves to protect the 14mm threads and can be removed.

• The standard rear sight is not installed out of the box (requires swapping the pre-installed optics plate).

• Internal trigger group components are mostly plastic.

View fullsize

Final Thoughts

The ASG CZ P-10 C CO2 Blowback Airsoft Pistol is a fantastic option for anyone looking for a modern, feature-rich sidearm. It bridges the gap perfectly between a realistic training tool and a highly capable Airsoft primary or secondary. The inclusion of an installed optics plate, a threaded barrel, and a hop-up that doesn't require field stripping shows that ASG really thought about the end-user when designing this replica. I'm looking forward to getting this out for the field test to see how that heavy slide cycles and this Airsoft Pistol tests out on the Chrony and Paper Target.

• Buy the ASG CZ P-10C CO2 Blowback Airsoft Pistol in Canada

• Buy ASG Airguns in the US

Hey everyone, Michael here from Replica Airguns. We’ve got another July unboxing video for you! If you're wondering why we have two in the same week, I recently realized I had a tiny mystery box video (featuring the ASG CZ P10C) all finished and ready to go, but I completely forgot to hit publish on it. Better late than never!

After getting a little low on review gear in the warehouse, I decided to bring in a new, medium-sized box of goodies to test out. Here’s a quick look at the highlights of what just landed.

View fullsize

Gear Stock Copper-Coated BBs

First out of the box, we have some Gear Stock copper-coated steel BBs. I typically prefer using zinc-alloy BBs, but I haven't used this specific brand specifically. I’m eager to run these through a few tests to see how they perform and whether they may corrode long term leave any black residue in the barrel or on the gun.

Umarex P2P Secure 68P Impact Defense Kit

Next up is the Umarex Prepare to Protect (P2P) Secure 68P, a .68 caliber less-lethal impact defense kit. Right off the bat, the packaging screams quality, it comes in a really nice, durable nylon soft case.

Inside, you get a great variety of ammunition to load into its 6 round metal magazine:

• 6 glass breaker impact rounds

• 6 powder practice rounds

• 6 rubber impact rounds

The pistol itself features a double-action trigger, runs on 12g CO2 (which they thoughtfully include in the kit), and fires at a velocity of around 350 FPS. It has a great weight and feel to it, and I'm looking forward to getting this on the chronograph.

View fullsize

Daisy Woodland Trail Western Carbine (Model 1999)

Finally, we have something that’s just pure fun: the Daisy Woodland Trail Western Carbine 1999. It's a classic lever-action BB rifle but with a modern, outdoorsy twist.

Instead of the traditional wood look, this model features a really cool green stock with a matching trigger. It also brings some nice upgrades to the table, including a Picatinny rail for mounting a red dot or optical scope, a fiber optic front sight, and an adjustable rear sight for elevation. It holds a massive 650 BBs and shoots right around 350 FPS. I haven’t shot one of these green stock versions yet, and I already know it's going to be a blast for backyard plinking.

What's Next?

Stay tuned because dedicated tabletop and field test shooting videos for all of these products are coming up very soon! You know I love shooting these lever-action rifles, so expect a detailed breakdown once I get them out in the yard or here in the sea can Airgun range.

As always, you can find these items available in both our Canada and US stores. Thanks for watching, and don't forget to subscribe to the YouTube channel and follow us across our social media platforms so you don't miss the full reviews!

View fullsize

The G&G ESG B10 2.0 continues to offer a truly unique experience for those looking for a bullpup-style gas Airsoft Shotgun. In this field test review for the RA Reviews channel, I tested the shotgun to see how it performs in terms of velocity and real-world accuracy at close range. Having already covered the specifications in the tabletop video, this test focuses on its live-fire performance using the 5-round burst mode. The ESG B10 2.0 has the ability to shoot either 5 or 10 rounds per trigger pull, and getting it on the range really shows off what this platform is meant to do. Checkout my Table. Top Review for details, specifications and more close up video.

For ammunition and setup, I used standard green gas and .25g airsoft BBs. Velocity testing through the chronograph produced some solid and expected numbers. The first shot registered a high of 238 FPS, which is very common on a fresh gas fill. After the gun settled down, it delivered consistent readings of 207 FPS, 206 FPS, and 209 FPS, averaging right around 215 FPS. When you are firing five .25g BBs simultaneously, that combined energy is more than enough for close-quarters engagements.

Accuracy testing was performed from 30 feet downrange using the 105-round mid-cap magazine. Since I didn't have any sights mounted on the G&G ESG B-10 2.0 Gas Airsoft Shotgun for this test, I relied on winging it by aiming slightly to the left to compensate for the spread. The shotgun fired reliably through the entire magazine, giving about 15 or so pulls of the trigger in the 5-round burst mode with a few 10 round burst shots added in. You will immediately know when you are out of ammunition or gas because the gun makes a noticeably different, very quiet sound when firing empty, which is a helpful audible cue during a match.

View fullsize

Overall, the G&G ESG B10 2.0 is a lot of fun and functions exactly as a close-quarters BB sprayer should. The trigger pull is on the heavier side, but it feels good and adds to the robust handling of the gun. The bullpup design makes it incredibly maneuverable for indoor CQB fields. While this review captures the core performance of the shotgun based on this specific field test, it's just a fragment of what this platform can do. You might consider exploring different optic setups on the top rail, experimenting with M-LOK foregrips, or even looking into HPA setups to unlock different aspects of its performance and allow for new play styles.

In terms of how many rounds actually hit the target? Well it’s hard to say, lots missed for sure! That’s not really the point of this type of close quarters shooter, as you want rounds to speed out and hit as many people as possible, so I would say the G&G ESG B-10 2.0 Gas Airsoft Shotgun worked as intended here.

You can find the G&G ESG B10 2.0 Gas Airsoft Shotgun, along with plenty of extra magazines, gas, and BBs, at:

• Buy the G&G ESG B-10 2.0 Gas Airsoft Shotgun in Canada

• BuyAirsoft Rifles in the US

Be sure to check out the video version of this review, and you can follow the content on YouTube, Vimeo, Facebook, Instagram, and Twitter!

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

Replica Airguns takes a step back in time to share how everything began, long before the channel, website, and stores grew into what they are today. The journey started around 2006, just a year after YouTube first launched. At the time, online video was still in its infancy, with low-resolution clips, shaky footage, and minimal production quality being the norm.

Mike created the very first video simply for fun. It featured a modified Umarex Walther PPK BB gun that Mike had altered for full-auto shooting. Edited in iMovie on a Mac and uploaded in low resolution (under 640×480), the video wasn’t intended to be anything more than a casual experiment. However, after sitting online for a few months, it unexpectedly reached around 100,000 views, an impressive number for that era, when far fewer creators were uploading content and viral videos were rare.

That early success revealed something important: there was real interest in Airguns and BB gun content. From there, Mike purchased more Airguns (to his wife’s disapproval), more videos were created, and the foundation for a focused channel began to take shape. A few years later, the project became more serious, evolving into a dedicated platform and eventually transitioning into the Replica Airguns brand you see today!

Over time, the brand expanded into multiple websites, ReplicaAirguns.com, ReplicaAirguns.ca, and ReplicaAirguns.us, along with a large video library. Although the channel faced setbacks, including being removed from YouTube at one point, the content continued to live on through platforms like Vimeo and Rumble. Now, with nearly all videos being restored back to YouTube, the library is close to fully rebuilt.

The original video that started it all was thought to be lost for years, buried on old storage drives. Recently rediscovered, it has been enhanced using modern AI tools to improve clarity while still preserving its original look and feel. Despite its dated quality, it represents the true starting point of the Replica Airguns journey.

For viewers interested in Airguns, including BB guns, Airsoft, Pellet guns, and more, the channel and websites continue to offer extensive content and product availability across both Canadian and U.S. online stores.

View fullsize

Today’s unboxing, we’ll call it the March 2026 Unboxing Preview!

I had no idea what was in this box, and honestly, I like it that way. It makes every delivery feel a bit like Christmas. A box shows up from the warehouse, I crack it open, and my job is to let you know what’s inside and what might be coming soon to the store. A lot of the time these are products we’ve never carried before. Not always, but usually there’s at least something new or unexpected in the mix.

As usual, getting into the box was its own little challenge. Good thing I had my “box cutter “ handy. Once I finally got through the packaging, it was clear right away this one had some interesting stuff inside.

What was in the box?

View fullsize

1) Annie Oakley Lil’ Sure Shot BB Rifle

First out of the box was something a little different: the Annie Oakley Lil’ Sure Shot.

This one is brought to you by Air Venturi / Western Justice, and it’s essentially a Red Ryder-style lever action BB rifle with some nice Western-themed touches. Right away, it stood out with the stained solid wood stock, wood forearm with engraving, and engraved Annie Oakley artwork.

Here are some of the listed specs and features:

• Ammo: .177 caliber / 4.5mm steel BBs

• Action: Lever cocking, spring piston

• Barrel: Smoothbore

• Overall Length: 36.25 inches

• Capacity: 550 BBs

• Claimed Velocity: Up to 350 FPS

• Weight: 3.3 pounds

• Max Shooting Distance: 212 yards

Once I opened it up, it definitely gave me that familiar Red Ryder / Marlin Cowboy vibe, but it feels like it may be just a bit bigger overall. Maybe a slightly longer stock, maybe just a bit more substantial in the hands. I’ll have to compare it side-by-side with a Red Ryder later to know for sure.

A few things I noticed right away:

• It has a metal lever

• Metal frame

• Metal barrel

• A plastic muzzle tip

• A rear sight that appears adjustable

• And surprisingly, a Weaver-style rail on top for mounting an optic

That top rail is actually a nice touch. You could absolutely throw a small scope on this if you wanted to, and why not? It makes for a fun little plinker, and the engraving gives it some real visual appeal too.

I’ve always had a soft spot for these little lever-action BB rifles. They’re just fun. They’re simple, classic, and a great way to introduce younger shooters to safe rifle handling. Rifles like this tend to be a bit easier for beginners since they’re not as quick to wave around as a pistol.

So yes, this one looks like it should be a lot of fun, and I’ll be doing both a Tabletop Review and a Field Test Shooting Review on it soon.

View fullsize

2) .68 Caliber Nylon Balls (100 Count)

Also in the box was a pack of 100-count .68 caliber nylon balls.

These feel noticeably heavier than the rounds I was using in my earlier T4E TC68 review. The previous ones were around the 2.8 to almost 3 gram range, and these new ones feel more like they’re getting up into the high 3 gram to 4 gram area.

That added weight could make them especially interesting to test in the TC68, since more projectile mass can sometimes translate into more energy on target, even if velocity comes down a bit.

So these should be fun to test out, and as it turns out, they may have arrived for a very good reason…

3) Steambow B08 / .68 Caliber Rubber Ball Crossbow Platform

This was the big surprise in the box, and definitely the highlight item.

If you watched my SHOT Show coverage, then you may remember this one from the Steambow booth. It’s a really cool product: basically a magazine-fed rubber ball shooting crossbow-style launcher in .68 caliber.

I had already gotten a chance to try it at SHOT Show, and Steambow was great about letting us check it out there. So it was pretty exciting to see one show up here for review.

Some of the box highlights:

• Detachable magazine

• 8-shot capacity

• .68 caliber projectiles

• Includes 25 foam balls

• Comes with a 35-pound limb

• AR-style adjustable buttstock

• Protective shooting glasses included

This product has a lot going on in the box. Once I opened it up, there were multiple components and accessories packed inside, including:

• Main body / receiver section

• Foregrip

• AR-style buttstock

• Upper receiver section with included magazine

• 35-pound limb

• Bow string and related accessories

• Lubricant / wax for the string

• Mounting hardware and tools

• Protective glasses

• 25 included foam balls

There’s definitely going to be some assembly involved before I can do a full review, so that will be part of the tabletop video.

The main unit itself feels solid and substantial. It has some good weight to it, and overall it looks like a very cool design. The included 35-pound limb should offer a decent balance between usability and performance. At SHOT Show we were only using a lighter 25-pound setup, which was very easy to draw, great for casual target practice, but obviously not the high-performance option.

One of the things I like about this platform is that it gives you that crossbow-style shooting experience while using reusable .68 caliber balls. That can make it easier and cheaper to shoot compared to bolt-style systems, where each arrow or bolt can get expensive fast, especially if you miss the target and damage one.

And since I now also have those heavier nylon .68 caliber rounds from the same box, I should be able to test both the included foam balls and the heavier options to see how they compare.

This one should make for a very interesting review.

Final Thoughts

So that was the March 2026 mystery box. We’ve got two very different products here:

• The Annie Oakley Lil’ Sure Shot, which looks like a fun, classic lever-action BB rifle in the Red Ryder tradition

• And the Steambow B08 / .68 Caliber Rubber Ball Crossbow Platform, which is something a little more modern, tactical, and definitely unique

Both of these are getting the full treatment, so expect Tabletop Review and Field Test Shooting Review videos for both products.

The Annie Oakley should be a blast to shoot, especially if it performs anything like the other Red Ryder-style guns I’ve reviewed over the years. And the Steambow system looks like it could be a really practical and fun way to enjoy crossbow-style shooting without the cost and fragility of traditional bolts.

I’ve still got a few earlier products to finish up as well, but I’ll be getting to these as quickly as I can.

Thanks for watching another Replica Airguns video. Don’t forget to subscribe, and check the links in the description for products available in our Canada and US stores.

For Canada, visit ReplicaAirguns.ca
For the US, visit ReplicaAirguns.us

And if you’re looking for other products including Airguns, BB guns, pellet guns, airsoft guns, blank guns, and accessories, be sure to check out both stores as well.

Michael here from Replica Airguns with an important public announcement, especially for those of you who mainly follow us on Vimeo or Rumble.

If you are watching this on YouTube, then you probably already know the news, we are finally back on YouTube. However, a lot of our long-time viewers may not be aware of this yet, so if you have the opportunity to help spread the word, it would really mean a lot to us.

What Happened to Our Original YouTube Channel

Several years ago our original YouTube channel was suddenly terminated due to what YouTube described as a “counterfeit claim.” Unfortunately, we were never given any clear explanation about what specific video or product triggered the action.

At the time, the Replica Airguns channel had been built over many years and included over 1,000 videos, millions of views, and hundreds of thousands of subscribers. Losing the channel meant losing our entire YouTube audience overnight.

To this day, we still do not know exactly what product or video led to the termination. Replica Airguns does not sell counterfeit products. All of the airguns and replicas we review and sell come from legitimate manufacturers such as:

• Umarex

• ASG

• Crosman

• SIG Sauer

• and other major licensed manufacturers

These companies produce officially licensed replica versions of real firearms, which is why they look authentic. The difference is that they shoot BBs, pellets, airsoft, or paintball rounds, not real ammunition.

Unfortunately, once the termination occurred, there was no real way to speak with a person or properly dispute the decision. Like many others at the time in the airgun community, we were caught up in a period when gun-related channels were facing heavy restrictions or removals.

A Fresh Start on YouTube

The good news is that we are rebuilding.

Over the last couple of months I have been gradually uploading our videos back to YouTube. The process is a bit slow since it requires moving videos over individually, but it is working and the library is growing quickly.

So far:

• 800+ videos uploaded

• 1,300+ total videos planned

• 130+ new subscribers

• 10,000+ views and growing

Considering we are essentially starting from scratch again, this is encouraging progress.

Why Uploading Takes Time

Some viewers have asked why all the videos are not already up.

The main reason is that the transfer process from Vimeo to YouTube still requires a bit of manual work. Each video needs to be shared individually, which takes several clicks and some time for page refreshes and processing. Moving around 50 videos can take close to an hour or more, so it is something I do gradually every few days.

The good news is that once a video is sent to YouTube, the rest of the upload and processing happens automatically.

What to Expect

While the archive videos are being uploaded, new videos can sometimes get buried under the older uploads. Once the full library is back online, I will be reorganizing everything into playlists, including:

• Tabletop Reviews

• Field Test Shooting Videos

• Pellet Gun Reviews

• Airsoft Reviews

• Paintball Markers

• Other replica airgun categories

This will make it much easier to find specific content again.

Help Us Rebuild the Channel

If you have been following Replica Airguns for a long time, you know how much work went into building the original channel. Rebuilding it will take time, but with your help we can get the community back together again.

If you can, please help by:

• Subscribing to the new YouTube channel

• Sharing the channel with other airgun enthusiasts

• Letting people know Replica Airguns is back

You can find us on YouTube under:

RA Returns - @RAReturns

The name simply stands for Replica Airguns Returns.

Follow Replica Airguns

You can also find Replica Airguns here:

• Website & Blog: ReplicaAirguns.com

• Canada Store: ReplicaAirguns.ca

• US Store: ReplicaAirguns.us

We also post updates on Facebook, Twitter/X, and Instagram.

Thank you to everyone who has supported Replica Airguns over the years. We are excited to rebuild the YouTube channel and continue producing the airgun reviews, field tests, and content that this community has always enjoyed.

Stay tuned - there is a lot more content coming soon.

View fullsize

I stopped by the Blue Line booth and Connor showed me a line of peppered gel deterrent products they’re hoping to bring into Canada as dog-spray style options (with stronger versions available in the U.S., depending on regulations).

The key difference vs typical pepper spray: these use a jet/propulsion system that fires a more directed stream, designed to reduce blowback and improve placement.

JPX2 Gen 2 (2-shot)

• Takes a 2-shot cartridge; each trigger pull fires one shot.

• The cartridge is replaceable after use (Connor emphasized it’s essentially disposable once fired).

• Connor said range is about 20 ft; manufacturer specs cite roughly 5–23 ft depending on conditions.

4-shot option (JPX4-style)

Connor also showed a 4-shot version aimed at law enforcement markets, but they’re hoping it can be available more broadly as well.

Guardian Angel 4 (compact 2-shot)

A small two-shot, pocketable option with a simple safety and clip—intended as a quick, lightweight grab-and-go device.

Connor also mentioned optional laser sight accessories for better aiming, and that all versions are around the same practical range envelope.

If these can be brought in cleanly for Canada, they look like a good fit for a store + review pipeline: JPX2 Gen 2 for the main feature set, JPX4 for the multi-shot crowd, and Guardian Angel 4 for people who want something ultra-compact and simple.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

We stopped by the SABRE booth and spoke with Ashley about their Home Defense Pepper Launcher, specifically a second-generation version that (per Ashley) isn’t released yet. With less-lethal options getting more attention in Canada, I wanted to see what’s new, what specs we’re looking at, and whether it’s something we might be able to bring in for reviews and potential store availability.

What’s new with the Gen 2 (as described in the interview)

• “Quick Pierce” magazine system: Ashley demonstrated a faster “pierce and go” style setup, hit the control and you’re ready to aim.

• Pressure indicator: After piercing, an indicator pops out; as CO2 is depleted it retracts, giving you a visual cue that pressure is running out.

• CO2 release button: A control to vent the CO2, then remove the magazine.

Core platform details (current production specs for the .68 launcher family)

These are the commonly listed specs for the current .68 caliber SABRE launcher:

• .68 caliber projectiles

• 7-projectile magazine capacity

• Fiber optic sights (front/rear adjustable)

• Stated velocity up to ~350 FPS

• Range: direct impact effectiveness noted around 60 ft (18 m), with projectiles described as breaking/dispersion capability out to 175 ft (53 m)

Ashley also noted SABRE’s projectiles have a heavier payload than some competitors (in her words) to help with “strength” and accuracy.

Magazines, CO2, and shot count (from the interview)

• CO2 goes into the magazine

• 7 projectiles per magazine

• Two magazines per CO2 (so 14 shots)

Canada angle (what matters for importing)

• Ashley noted the current model is around ~20 joules, and said a Canadian version would likely need to be lower(depending on classification/import requirements).

• SABRE’s own online store states they do not ship internationally, including Canada (so any Canada availability would likely be via distribution/import channels rather than direct-to-consumer shipment).

If we can make the Canada piece work, this looks like a strong candidate for a hands-on review, especially because it’s .68 caliber, 7-round, and built around visibility (fiber optics) and ease of use.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

We didn’t catch this one at the Steambow booth, we were out at the SHOT Show indoor range checking out Steambow again, Tyler walked us through their brand-new-for-2026 B08: a magazine-fed .68 caliber ball launcher/crossbow that’s just starting to hit availability.

• New B08 .68 cal “ball launcher” platform (2026): This is a .68 caliber system designed to run .68 spherical projectiles (paint, foam/nylon, and pepper/irritant-type balls were all discussed as compatible options, depending on local rules).

• 8-shot, removable, pre-loadable magazine: The B08 uses a spring-fed 8-round magazine that inserts at the front. Tyler’s demo made it clear you can pre-load multiple mags and keep shooting quickly.

• Simple, repeatable action (easy to learn fast): The manual of arms is very “repeat-and-go”: load the mag, cock it, shoot, then cycle and repeat. Steambow describes the system as their familiar AR-Series quick-tilt/quick-clamp style for fast reloading.

• Ships mild, but can be upgraded for more power: The one I tested was using a 35 lb limb, but it’s built to accept other AR-Series limbs (stronger options sold separately). Tyler specifically said swapping to a much heavier limb can turn it into a high-velocity setup (he referenced up to a 150 lb limb and around 300 fps in his talk).

• Projectile flexibility is the whole point: If you already have .68 cal paintballs or similar at home, that’s the target “ecosystem” this is built around (so long as they’re spherical).

• Important safety + legal reality check: Steambow is very explicit that once you move beyond the “low power + soft balls” envelope, the B08 can become very dangerous, they warn that harder/heavier projectiles (including steel balls) raise risks like severe injury/lethality and ricochets, and that irritant/pepper-type rounds may be legally restricted depending on country.

Tyler’s range demo made the main selling points obvious: magazine speed, easy operation, and a huge range of .68 ball options. If we can get it lined up for Canada, it looks like a very versatile multi use platform, especially for anyone who wants .68 cal fun adn then some, without relying on CO2 or HPA.

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

I was in Las Vegas last week for SHOT Show, filming content for Replica Airguns, but I wanted to post a quick update so you know what I was up to.

I went to SHOT Show to connect with people in the industry and record a bunch of interviews with vendors and companies, Airgun and aintball brands included (and more). I ended up filming about seven interviews, and now that I’m home I’ve got a lot of great footage to go through.

I was in Vegas with my buddy Steve (the guy behind the camera). Once the filming was wrapped, we spent some time enjoying the city after a busy week. We also did a few things outside of SHOT Show, because if you’re in Vegas, you might as well experience it.

In this video, we’re at the Montecristo Cigar Bar inside Caesars Palace, winding down with a nice port and a cigar.

Stay tuned,now that I’m back, I’ll start editing and posting those interviews. If you want to watch the SHOT Show interview series, head over to Replica Airguns or watch on our Vimeo and YouTube channels as I post them…

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.