We are halfway through September, and another unannounced delivery just showed up at the door. This box was surprisingly compact but incredibly dense, hinting at a hefty amount of possible ammunition inside. Cracking it open revealed a massive 4,000-count bottle of BBs and an updated classic from Crosman.

Gear Stock 4.5mm Copper-Coated Steel BBs

The sheer weight of this package came from a bulk 4,000-round bottle of Gear Stock 4.5mm steel BBs. These specific rounds feature a copper coating, which looks great but comes with a few historical caveats.

• Copper vs. Zinc: In my experience, copper-coated BBs can tarnish over time. Unlike zinc, which stays relatively clean, older copper coatings can oxidize and leave a dark, powdery residue on your hands and inside your airgun's barrel.

• Quality Check: If you burn through your ammo quickly, the tarnishing won't be an issue. We will have to see if modern manufacturing has improved the coating durability on this Gear Stock batch, but I typically lean toward zinc-coated BBs for long-term storage and cleaner shooting.

• Buy Gera Stock BB’s in Canada

• Buy Gear Stock BB’s in the US

View fullsize

The Crosman 2240 XL .22 Caliber CO2 Pellet Pistol

The main event in this box is the Crosman 2240 XL. The 2240 platform has been a staple in the airgun community for decades, and the XL version finally addresses the most common pain points shooters had with the base model out of the box.

• Core Specs: The 2240 XL is a CO2-powered, bolt-action, single-shot pistol chambered in .22 caliber. It weighs in at 1.8 pounds, features a rifled steel barrel, and utilizes a standard 12-gram CO2 cartridge.

• The Metal Breech Upgrade: The standard 2240 and its multi-pump cousin, the 1322, utilize a plastic breech. Mounting an optic on those older models requires clamp-on barrel adapter rings, which can easily twist out of alignment. The 2240 XL ships with an upgraded all-metal breech featuring a milled 11mm dovetail rail, allowing for a rock-solid red dot or scope mount straight from the factory.

• Threaded Muzzle: The front of the barrel has a threaded muzzle cap. You can unscrew the tip to attach 1/2" UNF aftermarket compensators or moderators, adding another layer of customization.

• Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• Buy Pellet Pistols in the US

View fullsize

Customization and Practical Application

Because the 2240 XL features a dovetail rail instead of iron sights, it is built specifically for optics. This plays perfectly into the massive aftermarket support for Crosman’s 22xx and 13xx platforms.

I own a heavily modified "backpacker" setup on one of my personal Crosman .22s, featuring a skeletonized rear shoulder stock and a magnified scope. At sub-500 FPS, a .22 caliber pellet is highly effective for close-range pest control. When dealing with nuisance animals like crows attacking songbirds, an ultra-high-velocity pellet will often pass straight through the target, wasting its kinetic energy. A heavier .22 pellet moving at moderate speeds dumps its full energy upon impact, providing a much more immediate and humane dispatch.

The full tabletop and field test shooting videos for the Crosman 2240 XL are coming up next. Make sure you are subscribed on Rumble, Vimeo, X, Threads, or TikTok to catch the full performance breakdown when it goes live.

View fullsize

Today, we are putting the Marksman 1018 Spring-powered BB/Pellet Pistol through its paces in the indoor shooting range. Don't get too excited, this gun isn't going to blow your socks off with crazy power, and I highly doubt we'll be seeing sniper-level accuracy. I also only test it out using standard 4.5mm steel BB’s in this Field Test.

If you're looking for the nitty-gritty details, specifications, and close-up angles, I have already done the dedicated Table Top Video Review for this gun, so be sure to check that out. For this session, we are strictly focused on performance: getting it on the Chrony and seeing how this spring-powered plinker handles when we actually put some 4.5mm BB rounds downrange.

Chronograph and Velocity Testing Starting things off with the chrony test, I wanted to see what kind of speed we could get out of this basic springer. Marksman claims it can shoot up to 200 FPS on the packaging. To test this, I loaded up the built-in BB reservoir to see if it could hit those numbers. Let's see how it performed:

• Shot 1: 111 FPS

• Shot 2: 110 FPS

• Shot 3: 107 FPS

• Shot 4: 115 FPS

• Shot 5: 108 FPS

• Shot 6: 108 FPS

• Average 110 FPS

As you can see, the numbers were very consistent, hovering right around the 110 FPS mark. While it is incredibly consistent, it falls well short of the 200 FPS claim. Because of this exceptionally low velocity, I decided to scrap my usual 30-foot target test. The gun just doesn't have the power to push BBs effectively at that distance without a massive arc, so I moved closer to the paper target at around 20 feet.

View fullsize

Accuracy Downrange at 20 Feet Next up, from 20 feet out, I took aim to see what kind of grouping the Marksman 1018 could pull off on a fresh paper target.

Shooting the Marksman 1018 Spring-powered BB/Pellet Pistol requires a bit of an adjustment. Out of the box, the fixed sights were shooting rather high and significantly to the left. I was aiming dead center at the bullseye, and the rounds were lofting up and striking far left of the center ring. Because you are dealing with completely fixed sights on a low-velocity plinker, you're going to have to rely heavily on "Kentucky windage", meaning if you want to hit your target, you'll need to aim well to the right and a bit lower to compensate. At 30 feet, those BBs would just be arcing even more dramatically, so 20 feet (or even 10 feet) is definitely the sweet spot for this pistol.

Shooting Feel and Features Despite the low velocity and accuracy quirks, the physical shooting experience has some redeeming qualities. The loading mechanism works flawlessly; it draws from the internal reservoir consistently without missing a single beat while cocking as long as it is fairly full.

Cocking the spring is incredibly easy, and the trigger actually isn't half bad for such a basic, entry-level gun. Since it's spring-powered, there is no need for CO2. This means it will work in absolutely any environment, rain or shine, and it’s incredibly cheap to shot.

View fullsize

Final Thoughts Ultimately, the Marksman 1018 Spring-powered BB/Pellet Pistol is exactly what it looks like: a real basic, inexpensive plinker. It’s not meant for long-range accuracy or high power. It's designed for casually plinking pop cans in your backyard or basement at 10 to 20 feet. For just a few bucks, you can grab a bottle of BBs and have some cheap, casual fun without ever worrying about buying or running out of CO2 cartridges. It is inexpensive to buy, inexpensive to shoot, and incredibly easy to operate.

Where to Buy

• Buy the Marksman 1018 Spring BB - Pellet Pistol in Canada

• Buy Airguns in the US

Thanks for tuning in! Make sure to head over and follow the Replica Airguns channels on Rumble, Vimeo, and YouTube. We are uploading as much content as possible to Rumble right now, and your support means the world as we keep building up our video community! Until next time, take care.

View fullsize

Hey everybody, Michael here from Replica Airguns with another field test shooting video! Today, we finally got our hands on another A&K M1873R M-Lock Lever Action Airsoft Gas Rifle. The first one we received had an issue with a leaking valve that someone tried to fix with some goop, so I got a return item to demo instead. For this session, we are strictly focused on performance: seeing how this model handles when we actually put some rounds downrange. I am using .25 gram Airsoft BBs and filling it up with propane gas. We are going to put this gun through its paces, but right out of the gate, we're dealing with some quality control quirks. Also make sure to checkout my Table Top video for the A&K M1873R for details specifications and close up video.

Chronograph and Velocity Testing

Starting things off with the chrony test, I filled the gun up with propane. It's worth noting right away that preparing this gun is frustrating; you cannot fill the gun with gas while the front mock suppressor is attached. You have to take a coin, unscrew it for 30 to 60 seconds, fill the gas, and put it back on. After finally getting it loaded up, let's see how the M1373 R version performed:

• Shot 1: 340 FPS

• Shot 2: 320 FPS

• Shot 3: 335 FPS

• Shot 4: 328 FPS

• Shot 5: 337 FPS

• Shot 6: 335 FPS

View fullsize

As you can see, the numbers were fairly consistent, keeping us comfortably in the 320 to 340 FPS range with a 7 shot average of 331 FPS. It shoots right around where you want it to be for an Airsoft Rifle of this type, though you can hear the gas starting to run a bit low if you push too many rounds through it without topping it off.

Accuracy Downrange at 30 Feet

Next up, I stepped back to my standard 30-foot mark to see what kind of grouping the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle could pull off on a fresh paper target. I put about 10 or 11 rounds through it for this string. Because of the way it was hitting, I intentionally aimed towards the bottom of the target ring to compensate for it shooting high the way the red dot was sighted in.

Shooting this gun requires some effort. The trigger is honestly quite heavy for what is essentially a single-action pull, so you really have to crank it. Despite the heavy trigger, the end result was a fairly decent 2.5 to 3-inch grouping. As long as you know where to aim or have your sights dialed in, it's actually not a bad shooter downrange.

Shooting Feel and Quality Control Issues

The physical shooting experience is where this A&K replica really struggles, largely due to lacking quality control. Out of the box, a small retention spring meant to keep the loading port door closed, fell out of the breech area. Because of this, it misfeeds, and the BB stays in the bottom part of the breech unless you give the lever an intentional, forceful push to load it correctly.

The other major headache is the previously mentioned mock suppressor design. Having to take a tool or coin to remove it just to fill it up with gas makes no sense for field use. They really should have included an open-front mock suppressor or an extender piece so you can reach the valve easily without a teardown process every 20+ shots or so.

View fullsize

Final Thoughts

Ultimately, the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle is a very cool-looking modern lever action rifle, but I really wish it didn't have these out-of-the-box issues. Between the two models I looked at, both had problems, from leaking valves to a finicky loading door. The unnecessary 60-second hassle just to fill the gas tank holds it back from being a great plinker unless you simply do not install the mock suppressor. It definitely shoots well enough and hits good FPS numbers, but you'll have to deal with some frustrating design choices and quality control along the way.

Where to Buy

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US

Thanks for tuning in! Make sure to head over and follow the Replica Airguns channels on Rumble and Vimeo. We are uploading as much content as possible, and your support means the world to us!

View fullsize

Welcome back for another field test! Today I am taking the Daisy Woodland Trail Western Carbine 1999 out to the range to see what it can do. If you want a deep dive into the specifications, materials, and a close-up look at the hardware, make sure to watch our dedicated Table Top Review. For this video, however, I am focusing entirely on how this lever-action BB rifle performs when putting steel to paper.

Velocity and Chronograph Performance

To get a baseline for power and consistency, I ran a string of shots through the chronograph. The manufacturer claims velocities in the 300+ FPS range. Here is how the Daisy handled right out of the box:

• Shot 1: 291 FPS

• Shot 2: 286 FPS

• Shot 3: 285 FPS

• Shot 4: 284 FPS

• Shot 5: 283 FPS

The consistency on this carbine is outstanding. After a slightly higher first shot, it locked right into the high 280s and low 290s and stayed remarkably steady throughout the test string with an average fps of 286.

One quirk to watch out for during operation is the loading system. While cocking the lever, you might occasionally get a "dud" or mis-feed where a BB fails to chamber properly. If this happens, you simply need to (while pointing the barrel up) give the Daisy Woodland Trail Western Carbine 1999 a quick shake to position the ammo and rack the lever again.

View fullsize

Downrange Accuracy at 30 Feet

Moving on to the accuracy portion of the review, I set up a fresh paper target exactly 30 feet downrange.

• Target Testing: I fired 10 carefully aimed shots. The gun delivered an excellent grouping of about 1.5 inches. The cluster was perfectly centered left-to-right, meaning the windage was completely dialed in straight out of the box which is great since there are no windage adjustments to speak of. It did shoot slightly high on the elevation, but compensating for this is simply a matter of aiming just underneath the bullseye or tweaking your optics if you mounted a red dot or optical sight.

View fullsize

Handling Notes and Optics Fitment

This is an incredibly fun lever-action plinker. One of the best design choices on this specific Daisy Woodland Trail Western Carbine 1999 model is the modernized, bigger loop on the lever, which makes it much more comfortable for shooters with larger hands to cycle the action or if wearing gloves.

You will also find a major upgrade on the top of the receiver. This version features a Picatinny rail, making it extremely easy to mount optics. I actually used the built in open sights rather than installing a red dot sight during this specific accuracy test, and the iron open sights worked very well for me. If you prefer iron sights, the rear sight remains fully adjustable for elevation but not windage.

Final Thoughts

The Daisy Woodland Trail Western Carbine 1999 is a rugged, highly affordable BB gun that backs up its classic lever-action fun with rock-solid consistency and great accuracy on the range. It is incredibly cheap to shoot, making it the perfect backyard plinker for knocking over pop cans or army men. Just remember to always wear your eye protection!

Where to Buy

• Buy the Daisy Woodland Trail Western Carbine 1999 in Canada

• Buy BB Rifles in the US

If you haven't already, please head over to our YouTube, Rumble, and Vimeo channels and hit that subscribe button. We are always working to build our video community back up, and we truly appreciate your support!

View fullsize

In this table top review, we are taking a close look at the Daisy Model 1999 Lever Action Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This rifle fits into the long, classic lineage of lever-action BB guns, modeled after traditional Western lever-action carbines like the legendary Daisy Red Ryder. While it shares that iconic spring-piston platform, the Daisy Model 1999 brings a modern aesthetic update with all-weather synthetic furniture, high-visibility fiber optics, and a built-in optics rail.

Key Specifications

• Model: Daisy Model 1999

• Type: Lever Action Spring-Piston BB Rifle

• Caliber: 4.5mm (.177 cal) Steel BBs

• Power Source: Spring-Piston (No CO2 Required)

• Velocity: Approx. 350 FPS

• Magazine Capacity: 650-Round Internal Reservoir (Gravity Fed)

• Action: Single-Shot Lever Action

• Safety: Cross-Bolt Safety

• Barrel: Smoothbore Steel Barrel (inside outer metal barrel shroud)

• Stock & Forearm: All-Weather Molded Synthetic / Composite Polymer (Green)

• Construction: Metal Outer Barrel & Receiver with Polymer Stock, Forearm, & Lever

• Weight: Approx. 2.2 lbs

• Overall Length: 35.4 inches

• Sights: High-visibility fiber optic front sight; elevation-adjustable rear sight

• Optics Rail: Built-in Picatinny rail mount

View fullsize

First Impressions & Build Quality

The Daisy Woodland Trail Model 1999 puts a contemporary spin on the traditional lever-action look, sporting an all-weather green molded synthetic stock and forearm paired with an orange trigger and barrel band accent.

Weighing in at just 2.2 pounds with an overall length of 35.4 inches, it is exceptionally lightweight and compact, making it an ideal entry-level platform for younger shooters and beginners.

The rifle incorporates a solid amount of metal along the outer barrel and receiver casing. While it does use polymer for the stock, forearm, and cocking lever, the build feels sturdy and low-maintenance.

View fullsize

How It Works

The Woodland Trail Model 1999 utilizes the proven spring-piston lever-action mechanism:

• No CO2 or Gas Required: Every shot is cocked and powered manually via the spring-piston system.

• Large Loop Lever: Cocking is smooth and easy thanks to the oversized loop lever.

• Massive Ammo Capacity: It holds up to 650 steel BBs in a top-loading internal reservoir.

• Gravity Fed: Tilting the rifle cocks and drops a BB into the loading mechanism, visible through a small viewport near the breach so you can confirm a round is chambered before firing.

Sights & Optics

Unlike traditional bare-iron lever guns, the Daisy Model 1999 comes equipped with several optical upgrades:

• Fiber Optic Front Sight: The bright front fiber optic sight makes target acquisition quick and clear against varying backgrounds.

• Adjustable Rear Sight: Step-adjustable for elevation (fixed for windage).

• Built-in Picatinny Rail: A dedicated top rail allows for easy mounting of compact red dot sights or low-power optics without needing custom brackets or adapters.

Pros & Cons

Pros:

• Extremely lightweight (2.2 lbs) and compact—perfect for youth and beginners.

• Durable, all-weather synthetic stock is moisture-resistant and low maintenance.

• Built-in Picatinny rail makes adding red dots or scopes simple.

• Bright fiber optic front sight aids quick target acquisition.

• Smooth, easy-cocking lever action with a large loop handle.

• Huge 650-round gravity-fed BB reservoir means less reloading downtime.

• 350 FPS velocity is safe and well-suited for supervised backyard plinking.

• No CO2 or gas cartridges required.

• Highly affordable entry-level price point.

Cons:

• Synthetic plastic cocking lever (a metal lever would feel more robust).

• Lower velocity compared to modern CO2-powered airguns.

• Rear sight adjusts for elevation only (no windage adjustment).

• BB ammo only and smoothbore barrel limits pinpoint precision to short plinking ranges.

• Basic spring action lacks the ultra-realistic shell-ejecting mechanics of higher-end replicas.

View fullsize

Final Thoughts

The Daisy Woodland Trail Model 1999 is a reliable, fun, and accessible take on the classic lever-action spring BB rifle. By blending traditional lever-action shooting with modern polymer furniture, a fiber optic front sight, and a Picatinny optics rail, it offers fantastic value for casual plinking and teaching basic marksmanship while offering some customization.

Stay tuned for our upcoming Field Test Shooting Review, where we’ll put this rifle through its paces on the chronograph and see what kind of target accuracy it delivers!

Available at:

• 🇨🇦 Buy the Daisy Woodland Trail Model 1999 in the Canada Store

• 🇺🇸 Buy BB Rifles in the US Replica Airguns Store

Also check out ReplicaAirguns.com for more written articles, detailed photos, and reviews.

View fullsize

First Look & Overview In this table top review, we are taking a look at the Marksman Spring BB / Pellet / Dart Pistol, an inexpensive and versatile option for backyard and basement plinking. This model is primarily constructed with a plastic exterior shell, housing a single-stroke spring-piston power plant. Coming in at around $50 CAD, this is not a high-end replica, but it offers a highly accessible shooting experience with the ability to handle multiple types of ammunition.

View fullsize

Specifications

• Caliber: 4.5mm Steel BBs, .177 Caliber Pellets, & Darts

• Action: Single-stroke spring piston, break-barrel style loading

• Magazine: 18-round BB reservoir (single-shot for pellets and darts)

• Power Source: Spring piston

• FPS: Maximum 200 FPS

• Weight: ~1 lb (454 grams)

• Overall Length: 9 inches

• Construction: Mostly plastic exterior with internal metal components

• Sights: Fixed fiber optic sights (front and rear)

• Safety: Cross-bolt safety

View fullsize

Build Quality & Design The Marksman Spring BB / Pellet / Dart Pistol features a lightweight, predominantly plastic external construction. While it lacks the substantial heft of full-metal replicas, weighing in at just 1 pound, it feels quite comfortable in the hand. The grip has a nice texture and isn't overly thick, making it suitable for shooters with smaller hands even though the pistol maintains a slightly bulky, blocky 1911-style appearance. Despite the external plastic shell, the internal spring piston system and critical mechanical components are made of metal.

View fullsize

Magazine & Loading System Loading this pistol is a unique process. It features a built-in 18-shot internal reservoir for 4.5mm steel BBs. To fire, the rear section of the slide is pulled back to activate the spring piston. Pushing the top portion forward opens the breech in a break-barrel fashion, allowing access to the loading bay. When using BBs, they drop in from the internal reservoir. If you are shooting pellets or darts, you will load them one at a time directly into the breech. An included rubber speed-loader accessory lets you easily drop BBs into the reservoir by simply pinching it, a convenient feature that saves loading time.

Handling & Controls Operating this spring piston pistol requires manual cocking before every shot. The slide is used to cock the internal spring, and the trigger features a skeletonized design within a built-in fairly heavy trigger guard. The trigger pull is decent but requires a deliberate press. The cross-bolt safety effectively locks the trigger, ensuring that the pistol cannot be fired once cocked and loaded until you have disengaged it. (Mine did have an issue)

View fullsize

Sights & Optics The Marksman Spring BB / Pellet / Dart Pistol comes equipped with fixed fiber optic sights on both the front and the rear. This makes target acquisition noticeably easier, especially against various backgrounds or in lower light conditions. The sights are fixed and non-adjustable, and the pistol even though it looks like it does, it does not include accessory rails for mounting aftermarket optics or lasers.

Performance Expectations This airgun is not built for shattering power records, boasting a maximum velocity of around 200 FPS. Because of its low power output, it is very quiet to operate, making it ideal for close-range indoor plinking or backyard target shooting where noise is a concern. The spring piston action means there is no CO2 to buy, keeping your operating costs extremely low.

Pros

• Very affordable (around $50 CAD)

• No CO2 required; low ongoing operating cost

• Versatile ammo compatibility (shoots BBs, pellets, and darts)

• 18-round internal BB reservoir

• Included quick-load pinch accessory for BBs

• Fiber optic sights front and rear

• Lightweight and easy to handle for various hand sizes

• Quiet operation ideal for indoor or backyard shooting

Cons

• Low velocity (max 200 FPS)

• Predominantly plastic exterior construction

• Requires manual cocking for every single shot

• Fixed, non-adjustable sights

• No accessory rails

View fullsize

Final Thoughts The Marksman Spring BB / Pellet / Dart Pistol isn't about raw power or ultra-realistic blowback action. It's an accessible, budget-friendly airgun that doesn't require extra CO2 purchases. With the ability to shoot multiple types of ammo and a convenient included BB loader, it delivers straightforward, simple fun. Stay tuned for the upcoming field test shooting video to see exactly how this performs down range.

Be sure to check out our exclusive long-form video content on YouTube, Vimeo and Rumble and connect with us on Facebook, Twitter and Instagram.

• Buy the Marksman 1018 Spring BB - Pellet Pistol in Canada

• Buy Airguns in the US

We’ve got yet another box on the table today for our August Mystery Unboxing. It took a while to arrive, but it was absolutely worth the wait. We’re diving into four highly anticipated products across the BB, Pellet, and Airsoft categories.

Here is a quick first look at what’s hitting the review table soon!

View fullsize

Marksman Model 1018 .177 Caliber Air Pistol

First out of the box is the Marksman 1018. This is a very budget-friendly (around $50), 1911-inspired spring-actuated pistol. It features fiber-optic sights on the front and back, making it an excellent, quiet option for basement or backyard plinking. While it can technically shoot darts and bolts, we'll be sticking to BBs and pellets for our tests.

Basic Specifications:

• Action: Single-stroke spring piston

• Caliber: .177 Caliber (BBs and Pellets)

• Capacity: 18-shot internal BB reservoir

• Velocity: Up to 200 FPS

• Weight & Length: 1 lb / 9.0 inches

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

Next up is a beauty from Umarex, the Glock 17 Gen 5 MOS. If you love ultra-realistic replicas, this is it. It features a heavy full-metal slide spring, a recessed barrel, and classic white dot sights. The "MOS" means it comes ready with all the mounting plates you need to attach your favorite red dot sights. It runs on a full-size, drop-out 17-round metal magazine and utilizes a full blowback system for ultra realistic blowback operation.

Basic Specifications:

• Action: Semi-auto full blowback, single CO2 cartridge

• Caliber: 4.5mm (.177) steel BBs

• Capacity: 17-round drop-out metal magazine

• Velocity: Approximately 300 FPS

• Weight & Length: 1.5 lbs / 7.95 inches

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

I'm incredibly excited to finally do a proper field test on this one. This is a replacement for a previous model that had a leaky loading valve. This gas-operated, "Mares Leg" style lever-action rifle is heavily modernized. It features a gorgeous real wood stock, an enlarged lever loop, a Picatinny top rail, an M-LOK handguard for accessories, and a mock suppressor on the front.

Basic Specifications:

• Action: Gas Non-Blowback Lever Action (Green Gas)

• Caliber: 6mm Airsoft BBs

• Capacity: 25-round internal magazine

• Velocity: 360 - 390 FPS (with 0.20g BBs)

• Weight & Length: 3.7 lbs / 24.5 inches

View fullsize

Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle

Finally, we have an absolute powerhouse in a tiny package: the Specna Arms SA-E10 PDW. This is a super-compact AR-style AEG with a polymer-metal build and a telescopic stock. Specna Arms goes above and beyond with the box contents on this one. Along with the rifle, you get two S-MAG mid-cap magazines, an additional M90 drop-in spring to easily lower your FPS for indoor fields, a Deans adapter, and a vertical foregrip.

Basic Specifications:

• Action: Electric (AEG) with Pre-installed MOSFET

• Capacity: Includes two 125-round mid-cap S-MAG magazines

• Velocity: 375-390 FPS (Drops to ~310-320 FPS with included M90 spring)

• Length: Minimum 505 mm (approx. 19.8 inches)

• Inner Barrel: 160 mm precision 6.03mm barrel

Stay tuned to the Replica Airguns channel, as I'll be doing dedicated tabletop and field test shooting videos for all of these very soon.

View fullsize

In this Table Top Review, we're taking a detailed look at the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. As always, this is a Table Top Review only, so there won't be any shooting in this video. However, a dedicated Field Test Shooting Video will be coming later to see how it performs in real-world use.

This is an ASG product, officially licensed by CZ, and it features authentic markings, including the 9x19 stamp. It's a modern, full-blowback airsoft replica that mirrors the real steel CZ P-10 C very closely. Manufactured in Taiwan and distributed by ASG, this model stands out with some excellent out-of-the-box features, making it a highly versatile and realistic option for airsoft shooters.

View fullsize

Specifications

• Caliber: 6mm Airsoft BB.

• Action: Semi-auto, full blowback.

• Power Source: Single 12g CO2 cartridge (Green Gas magazines are also available).

• Magazine Capacity: 22-round full metal drop-out magazine.

• Velocity: ~330 FPS (1.05 Joules) with .20g BBs.

• Weight: 1.63 lbs (730 g).

• Overall Length: 7.09 inches (195 mm).

• Construction: Metal slide, nylon/polymer frame.

• Barrel: 14mm CCW threaded outer barrel.

• Hop-Up: Adjustable (accessible via open ejection port).

• Optics Ready: Yes (optics plate pre-installed).

View fullsize

Build Quality & Design

The ASG CZ P-10 C delivers a solid mix of materials with its metal slide and nylon frame construction. The metal slide gives it a realistic, top-heavy weight and feel, while the nylon frame keeps the overall weight balanced at a manageable 1.63 pounds. The full metal 22-round magazine, which houses the 12g CO2 cartridge, adds substantial weight to the grip, giving the gun a very realistic presence in the hand.

Field stripping is incredibly simple and authentic to the real steel version—just pull down the two tabs and rack the slide forward to remove it. While the most of the frame components are mostly plastic, the heavy metal slide ensures durability where it counts.

View fullsize

Handling & Controls

This pistol is designed with ergonomics and modern handling in mind. It features mostly ambidextrous controls, including an ambidextrous slide catch and release. While the magazine release comes set up for right-handed shooters, it is completely reversible. The pistol includes a working trigger safety and comes with three interchangeable backstraps, allowing you to customize the grip size to perfectly fit your hand.

One of the standout design choices on this airgun is the hop-up adjustment. Instead of having to field strip the pistol to make adjustments, you can access the hop-up wheel directly through the open ejection port when the slide is locked back, a massive time-saver during gameplay.

View fullsize

Sights & Optics

Out of the box, the ASG CZ P-10 C is optics-ready and comes with an optics plate already installed on the slide. If you prefer to run standard iron sights, ASG includes a rear white-dot sight in the box that you can easily swap out by removing the plate. It also features a fixed white-dot front sight for quick target acquisition.

Additionally, the gun features a 14mm CCW threaded outer barrel right out of the box, hidden under a protective orange cap. This makes it instantly ready to accept a mock suppressor or a tracer unit once the cap is removed.

View fullsize

Performance Expectations

With a claimed velocity of around 330 FPS (1.05 Joules) using a 12g CO2 cartridge, it hits perfectly within standard indoor CQB limits while still offering enough power for outdoor play. Because it features full blowback operation paired with a fairly heavy metal slide, you can expect a very crisp, realistic recoil effect with every shot.

View fullsize

Pros

• Officially licensed by CZ with authentic 9x19 markings.

• Full blowback operation with a heavy metal slide for realistic recoil.

• Optics-ready out of the box with the plate pre-installed.

• 14mm CCW threaded outer barrel ready for a suppressor or tracer unit.

• Convenient hop-up adjustment dial accessible through the open ejection port (no field stripping required).

• Includes three interchangeable backstraps to customize grip size.

• Ambidextrous slide release and reversible magazine release.

• Simple and realistic field stripping process.

• Comes in a Black and Tan version

Cons

• Comes with an orange cap on the barrel, though it serves to protect the 14mm threads and can be removed.

• The standard rear sight is not installed out of the box (requires swapping the pre-installed optics plate).

• Internal trigger group components are mostly plastic.

View fullsize

Final Thoughts

The ASG CZ P-10 C CO2 Blowback Airsoft Pistol is a fantastic option for anyone looking for a modern, feature-rich sidearm. It bridges the gap perfectly between a realistic training tool and a highly capable Airsoft primary or secondary. The inclusion of an installed optics plate, a threaded barrel, and a hop-up that doesn't require field stripping shows that ASG really thought about the end-user when designing this replica. I'm looking forward to getting this out for the field test to see how that heavy slide cycles and this Airsoft Pistol tests out on the Chrony and Paper Target.

• Buy the ASG CZ P-10C CO2 Blowback Airsoft Pistol in Canada

• Buy ASG Airguns in the US

View fullsize

The Steambow B08 .68 Caliber Tactical Crossbow offers a unique and entertaining option for target shooting. In this field test review, I tested the Steambow B08, a .68 caliber launcher that is designed to shoot paintballs, rubber balls, or foam balls. I wanted to test this 35-pound bow to see how it performs in terms of velocity and real-world accuracy at 30 feet downrange.

For ammunition, I tested two different types of projectiles: black rubber balls and soft yellow foam balls. These projectiles are very light, which means firing them feels almost like you are dry-firing the bow all the time. However, using them makes for a cheap way to have some fun plinking around, and you can easily collect and reuse the ammo.

Velocity testing through the chronograph produced some incredibly consistent, albeit unusual, numbers. I fired six shots in total, using three rubber balls followed by three foam balls. The Steambow B08 delivered readings of exactly 129 FPS for all six shots. Seeing six duplicate velocity readings in a row across two different types of ammo is something I don't think I've ever seen before! This suggests that the projectile weight is less important here, as the bow string only moves so fast. For those looking to get more energy downrange, you will definitely want to use heavier projectiles, like a steel ball, and swap out for a heavier limb. (The Steambow B08 comes with a 35 pound limb for reference).

View fullsize

Accuracy testing was performed from 30 feet downrange on a fresh paper target. I loaded the eight-round magazine with four black rubber balls and four soft foam balls. The Steambow B08 .68 Caliber Tactical Crossbow was hitting quite low at this 30-foot distance, forcing me to aim up at the top of the target just to get the shots on paper. The grouping was somewhat scattered all over the place, indicating that this is a launcher you probably want to be working with a little closer in, at around 20 feet would be better in terms of accuracy. Aiming is done using a built-in little green dot at the front, but there is no real sight adjustment to dial it in or change it. Optimally I would sugest putting a simple red dot sight on the picatinny rail.

Overall, the 35-pound Steambow B08 is built primarily for target shooting and is a great way to have fun with your buddies outside or even inside a garage. I definitely wouldn't want to shoot this for pest control unless you plan to upgrade to a heavier limb and denser ammo. For anyone looking for a cheap, fun plinker with reusable ammo, this launcher is a very entertaining choice.

You can find the Steambow B08 and other Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and accessories at:

• ReplicaAirguns.ca

• ReplicaAirguns.us

View fullsize

The G&G ESG B10 2.0 continues to offer a truly unique experience for those looking for a bullpup-style gas Airsoft Shotgun. In this field test review for the RA Reviews channel, I tested the shotgun to see how it performs in terms of velocity and real-world accuracy at close range. Having already covered the specifications in the tabletop video, this test focuses on its live-fire performance using the 5-round burst mode. The ESG B10 2.0 has the ability to shoot either 5 or 10 rounds per trigger pull, and getting it on the range really shows off what this platform is meant to do. Checkout my Table. Top Review for details, specifications and more close up video.

For ammunition and setup, I used standard green gas and .25g airsoft BBs. Velocity testing through the chronograph produced some solid and expected numbers. The first shot registered a high of 238 FPS, which is very common on a fresh gas fill. After the gun settled down, it delivered consistent readings of 207 FPS, 206 FPS, and 209 FPS, averaging right around 215 FPS. When you are firing five .25g BBs simultaneously, that combined energy is more than enough for close-quarters engagements.

Accuracy testing was performed from 30 feet downrange using the 105-round mid-cap magazine. Since I didn't have any sights mounted on the G&G ESG B-10 2.0 Gas Airsoft Shotgun for this test, I relied on winging it by aiming slightly to the left to compensate for the spread. The shotgun fired reliably through the entire magazine, giving about 15 or so pulls of the trigger in the 5-round burst mode with a few 10 round burst shots added in. You will immediately know when you are out of ammunition or gas because the gun makes a noticeably different, very quiet sound when firing empty, which is a helpful audible cue during a match.

View fullsize

Overall, the G&G ESG B10 2.0 is a lot of fun and functions exactly as a close-quarters BB sprayer should. The trigger pull is on the heavier side, but it feels good and adds to the robust handling of the gun. The bullpup design makes it incredibly maneuverable for indoor CQB fields. While this review captures the core performance of the shotgun based on this specific field test, it's just a fragment of what this platform can do. You might consider exploring different optic setups on the top rail, experimenting with M-LOK foregrips, or even looking into HPA setups to unlock different aspects of its performance and allow for new play styles.

In terms of how many rounds actually hit the target? Well it’s hard to say, lots missed for sure! That’s not really the point of this type of close quarters shooter, as you want rounds to speed out and hit as many people as possible, so I would say the G&G ESG B-10 2.0 Gas Airsoft Shotgun worked as intended here.

You can find the G&G ESG B10 2.0 Gas Airsoft Shotgun, along with plenty of extra magazines, gas, and BBs, at:

• Buy the G&G ESG B-10 2.0 Gas Airsoft Shotgun in Canada

• BuyAirsoft Rifles in the US

Be sure to check out the video version of this review, and you can follow the content on YouTube, Vimeo, Facebook, Instagram, and Twitter!

View fullsize

Today, we are checking out the second-generation Lil' Sure Shot Annie Oakley BB Rifle. This is essentially a Red Ryder-styled, spring-powered BB rifle.

If you are interested in seeing how this looks up close along with the specifications and details, make sure to check out the table-top video. Today is going to be all about shooting it.

Chronograph Velocity Test

To get started, I needed to warm up the chrony, which took a little bit of troubleshooting. I had an ongoing voltage issue with my chronograph lighting and had to use a voltage regulator set to almost exactly 7 volts to get it to work properly without a proper adapter.

Once the chrony was up and running, I put several rounds through the rifle to test the velocity. The velocity remained pretty consistent in the mid-300s, with shots recording at 341, 340, 333, 329, 334, and 332 fps. averaging out at 334.

View fullsize

Target Accuracy Performance

For the accuracy portion of the test, I set up a paper target 30 feet down range. Here is how the rifle performed:

• Grouping: After firing about 10 shots, the rifle got just over a two-inch grouping.

• Placement: The shots were well-centered from left to right, though it shot a little high even when aiming just under the bullseye. I noticed a few stray BBs came back, which happens if they hit metal instead of the cloth backboard, causing some high flyers. (This could of been me as the bulk of the shots all grouped really nicely)

• Sights & Adjustability: It can be a little tough on the eyes aiming black front and rear sights on a target when you need readers for most things, which may have contributed to some of those shots hitting slightly higher. You can adjust the elevation slightly by moving a little piece on the sight backward and forward to raise or lower it. The rifle also features a dovetail, allowing you to mount a nice optical sight or a red dot.

Trigger Pull & Feel

• Pull Weight: The trigger pull comes in at around 5 to 6 pounds.

• Action: It is fairly short with a pretty predictable break.

• Usability: It requires a little effort, but it is not a super hair trigger, making it perfect for youngsters who are just starting out with shooting.

Conclusion

Overall, the Annie Oakley Lil' Sure Shot delivers exactly what you want out of a classic, Red Ryder-styled spring-powered BB rifle: it's straightforward, reliable, and just plain fun to shoot. While you aren't going to get competition-level precision out of a smoothbore BB gun, holding a solid two-inch grouping at 30 feet and putting out very consistent mid-300s fps velocities proves that it is more than capable of handling your everyday plinking or indoor target practice.

What really makes this rifle shine is its accessibility. With a predictable 5 to 6-pound trigger pull that requires deliberate effort without being a super hair trigger, it is a fantastic option for youngsters who are just learning the fundamentals of shooting. Plus, the inclusion of a dovetail mount means there is room to grow with the shooter, you can easily slap a red dot on there if the standard black iron sights prove a bit too tough on the eyes against various target. If you are looking for an entry-level plinker that performs right where it should, this second-generation Lil' Sure Shot is a great place to start.

If you want to pick one of these up, links are in the description to buy in both Canada and the US.

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

View fullsize

In this review, we are looking at two crossbows that honestly shouldn’t really be compared, but that’s exactly why this comparison is interesting. On one end, we have the Steambow M10, a compact, magazine-fed, fast-shooting crossbow built for fun, training, and high repetition shooting. On the other, the CenterPoint AT400, a full-size, high-powered compound crossbow designed for serious hunting applications.

Aside from both launching bolts/arrows, these two platforms sit at completely opposite ends of the spectrum. The goal here is not to declare a winner, but to help you decide which one actually fits your use case, or if you might want both.

Key Differences Overview:

Steambow M10

The Steambow M10 is a compact repeating crossbow designed more for fun, training, and high-volume shooting. It uses a magazine-fed system that can hold 10 bolts, allowing for very fast follow-up shots. Depending on the limb setup, it can reach speeds of up to around 200 FPS and produce approximately 10 to 15 foot-pounds of energy. Its lighter draw weight options and easy cocking system make it beginner-friendly and much less physically demanding to use. Overall, the M10 is best suited for target shooting, casual use, and potentially small game with the right setup.

CenterPoint AT400

The CenterPoint AT400 is a full-size compound hunting crossbow built for serious power and hunting use. Unlike the M10, it is a single-shot platform that focuses on accuracy, penetration, and range rather than fast repeat shooting. It sends arrows downrange at about 400 FPS and delivers close to 150 foot-pounds of energy, putting it in an entirely different class. With its roughly 200-pound draw weight, it requires much more effort to cock and reload, usually with a rope or crank system. This makes it better suited for medium to large game hunting, where power and shot placement matter far more than speed.

Side-by-Side Summary

If you want something lightweight, compact, fast, and easy to shoot often, the Steambow M10 is the better fit. If your main goal is hunting and you need maximum power, longer range, and serious downrange performance, then the CenterPoint AT400 is clearly the more appropriate choice. Even though both are crossbows, they are built for very different types of users and very different shooting experiences.

Power & Performance

The biggest separation between these two comes down to raw power.

• The Steambow M10 delivers up to about 10–15 foot-pounds of energy, depending on limb configuration and bolt weight. It’s comparable to higher-end airguns or paintball-level power.

• The CenterPoint AT400, by contrast, produces close to 150 foot-pounds of energy and launches arrows at around 400 FPS.

That’s not a small difference, it’s an entirely different category.

Real-world comparison:

• M10 = backyard shooting, small game potential

• AT400 = deer, and potentially even elk with proper shot placement

This is essentially the difference between a BB gun vs a hunting rifle in terms of role and impact.

View fullsize

Shooting Experience:

Steambow M10

• Magazine-fed (10 bolts)

• Extremely fast follow-up shots

• Break-action style cocking (very quick)

• Great for drills, repetition, and skill building

• Minimal effort required

You can realistically fire 10 shots in about 10 seconds, making it a very engaging and fun platform.

CenterPoint AT400

• Single-shot system

• Requires rope cocking or crank system

• Significant physical effort (200 lb draw)

• Slow reload (often 30–60+ seconds)

This is a deliberate shooting experience, not something designed for volume or speed.

Use Case Breakdown:

Steambow M10 – Best For…

• Backyard shooting (with proper backstop)

• Target practice

• Tactical-style drills

• High repetition training

• Casual and frequent use

• Lower-cost shooting (especially with rubber ball version)

View fullsize

You can even use:

• Rubber balls (low cost, reusable)

• Lightweight bolts

• Indoor-friendly setups (with proper safety)

CenterPoint AT400 – Best For…

• Hunting (deer and potentially larger game)

• Long-range accuracy

• Maximum penetration and power

• Purpose-driven shooting

This is not a casual-use product, you typically bring it out when it matters.

Ease of Use & Physical Demand:

Steambow M10

• Very easy to cock (even at lower draw weights)

• Beginner-friendly

• Lightweight (~compact platform)

• Minimal fatigue

View fullsize

CenterPoint AT400

• High effort required

• Needs cocking tools (rope or crank)

• Physically demanding

• Slower workflow between shots

Key takeaway:
Anyone can pick up and use the M10 easily. The AT400 requires more commitment, strength, and practice.

Size & Portability

Steambow M10

• Compact and lightweight

• Can be partially disassembled easily

• Backpack-friendly

• Ideal for mobile use

CenterPoint AT40

• Large, fixed structure

• Not easily transportable without a case

• Designed for field carry, not casual portability

Ammo & Cost of Ownership:

View fullsize

Steambow M10

• Bolts are smaller and cheaper

• Rubber ball version = extremely low cost

• Less wear and tear overall

• High reusability

CenterPoint AT40

• Arrows are larger and more expensive

• More prone to damage/loss at high speeds

• Requires maintenance and replacement over time

Value Consideration:

Interestingly, both fall into a similar price range (~$400–$500), but value depends on usage frequency:

• M10 → Likely used often → Higher practical value

• AT400 → Used less frequently unless hunting regularly

If something sits unused, its value drops regardless of price.

View fullsize

Who Should Buy Each?

Choose the Steambow M10 if you…

• Want fun, fast shooting

• Plan to shoot frequently

• Prefer low effort and ease of use

• Don’t need high power

• Enjoy tactical or training-style shooting

Choose the CenterPoint AT400 if you…

• Are hunting (especially deer or larger game)

• Need high power and penetration

• Value accuracy and range

• Don’t mind slower reload times

• Are comfortable with physical effort

View fullsize

Final Thoughts

These two crossbows are not competitors—they are tools for completely different jobs.

• The Steambow M10 is about frequency, fun, and versatility

• The CenterPoint AT400 is about power, precision, and purpose

If anything, this comparison highlights that you may not need to choose one over the other, you might actually benefit from having both ends of the spectrum covered.

If neither fits perfectly, then the real answer may be to look for something in the middle.

Where to Buy

Both of these crossbows (or similar models) are typically available through:

• Buy Steambow M10 in Canada

• Buy CenterPoint AT400 In Canada

• Buy in the US

View fullsize

In this table top review, we’re taking a close look at the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This model fits into a long lineage of classic lever-action BB rifles, alongside well-known options like the Daisy Red Ryder and the Marlin variants from Crosman and Umarex. These rifles all share a similar concept, simple, spring-powered, lever-action BB guns designed for training, plinking, and beginner shooters, but each brings its own subtle differences in materials, styling, and features.

Key Specifications

• Model: Air Venturi Annie Oakley Lil’ Sure Shot

• Type: Lever Action Spring Piston BB Rifle

• Caliber: 4.5mm Steel BB

• Power Source: Spring (No CO2 Required)

• Velocity: Up to 350 FPS

• Magazine Capacity: 550 Round Internal Reservoir (Gravity Fed)

• Action: Lever Action

• Safety: Cross Bolt Safety

• Barrel: Smoothbore

• Stock: Stained Solid Wood

• Construction: Primarily Metal with Some Plastic Components

• Weight: Approx. 3.3 lbs

• Overall Length: ~36.25 inches

• Optics Rail: Removable Weaver/Picatinny Style Mount

First Impressions & Build Quality

The Annie Oakley Lil’ Sure Shot stands out with its classic Western styling, enhanced by engraved Annie Oakley branding on the wood stock. It’s a step above many entry-level BB rifles thanks to its real wood stock and metal lever, giving it a more authentic and durable feel compared to fully plastic alternatives.

Most of the rifle is metal and wood, though there are a few plastic components:

• Trigger

• Front sight (on the newer version)

• Adjustable portion of the rear sight

• Removable scope rail

Overall, it feels solid in the hands, lightweight, and well-balanced, especially for younger shooters or anyone new to lever-action rifles.

View fullsize

How It Works

This is a spring-piston, lever-action BB rifle, meaning:

• No CO2 or gas is required

• Each shot is powered by cocking the lever

• BBs are stored in a large internal reservoir

• You must tilt the rifle upward to gravity-feed BBs into position

With a 550-round capacity, you can shoot for quite a while before needing to reload, your arm will likely get tired before you run out of ammo.

Handling & Usability

This rifle is clearly designed with accessibility in mind:

• Lightweight (3.3 lbs) makes it easy to handle

• Shorter length and pull fits smaller shooters well

• Moderate cocking effort is manageable for beginners

• Lever action slows firing rate, adding a safety advantage for new users

Rifles like this are excellent for training because:

• They are easier to aim than pistols

• They encourage controlled shooting

• They are not overly powerful

Even for experienced shooters, these are simply fun and inexpensive for backyard plinking.

Sights & Optics

Out of the box, the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle includes:

• Fixed front sight (plastic on newer version)

• Adjustable rear sight (elevation only)

One notable feature is the removable Weaver-style rail, allowing you to:

• Mount a red dot or scope

• Or remove it for a more traditional look

Keep in mind the rail is plastic, so care should be taken when mounting optics.

View fullsize

Comparison to Similar BB Rifles

This rifle sits in the same category as:

• Daisy Red Ryder – The original classic

• Umarex Marlin Lever Action – Slightly more adult-oriented design

• Crosman Marlin (older models) – Direct Red Ryder competitor

All of these:

• Use lever-action spring systems

• Have internal BB reservoirs

• Shoot in the ~300–350 FPS range

The Annie Oakley version distinguishes itself with:

• Better visual styling

• Wood and metal construction

• Optional optics mounting

New vs Older Annie Oakley Version (Key Differences)

If you come across different versions, here are the main distinctions:

Newer Version:

• Longer barrel

• Plastic front sight

• Larger loading port (easier to load)

• Metal Lever

• Brighter, more polished wood finish

View fullsize

Older Version:

• Shorter barrel

• Metal front loading system (rotating port)

• Metal front sight (more durable)

• Plastic Lever

• Slightly darker, more matte wood

Both should perform similarly, but the newer version is a bit more refined with that quality all metal lever.

Pros

• Lightweight and easy to handle

• Real wood stock and metal lever construction

• Large 550-round capacity

• No CO2 required (low maintenance and inexpensive to shoot)

• Removable optics rail for flexibility

• Classic Western styling with Annie Oakley branding

• Great for beginners and younger shooters

Cons

• Plastic front sight (new version)

• Lower power compared to CO2 rifles

• Rear sight only adjustable for elevation

• Slightly higher price than some entry-level similar BB rifles

• Less realistic than shell-ejecting lever-action models

Final Thoughts

The Air Venturi Annie Oakley Lil’ Sure Shot is a well-built, visually appealing lever-action BB rifle that blends classic styling with modern usability.

It’s ideal for:

• Beginners and younger shooters

• Backyard plinking

• Anyone wanting a simple, reliable and fun BB rifle

While it doesn’t aim for full realism like higher-end shell-ejecting models, it delivers where it matters, ease of use, affordability, durability, and fun factor.

Available at:

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

Also check out ReplicaAirguns.com for additional articles, photos, and video reviews.

View fullsize

In this table top review, we take a close look at the Steambow B08 .68 Caliber Tactical Crossbow, a compact and versatile system designed for shooting rubber balls, paintballs, or foam projectiles. This model is particularly suited for controlled environments like indoor ranges (such as a sea can setup or even basement or backyard), thanks to its relatively moderate power and flexible ammunition options.

A full shooting test will follow separately, but for now, let’s break down the specifications, features, and what comes in the box.

Specifications

• Model: Steambow B08

• Caliber: .68 (rubber balls, paintballs, foam balls, etc.)

• System Type: Recurve crossbow

• Draw Weight: 35 lbs (standard included limb)

• Velocity: Up to 260 FPS (manufacturer claim)

• Energy: Approx. 7 ft-lbs (up to ~15 ft-lbs with stronger limbs)

• Magazine Capacity: 8 rounds (removable)

• Weight: Just under 4 lbs

• Length: 24.2 inches

• Width: 3.15 inches (body, excluding limb span)

• Height: 8.3 inches

• Materials: Fiberglass, metal, and polymer construction

• Stock: AR-style adjustable (6-position) with cheek rest and rubber butt pad

The B08 is distributed by Steambow GmbH (Austria) and is built on a modular platform compatible with other Steambow systems like the M10.

View fullsize

Key Features

Modular Platform

One of the standout aspects of the B08 is its modular design. The lower receiver is identical to the Steambow M10, meaning you can swap uppers to shoot either:

• .68 caliber balls (B08 upper)

• Crossbow bolts (M10 upper)

This gives users flexibility to adapt the platform for different uses.

Quick Change Limb System

The included 35 lb limb is easy to swap out:

• Secured by a single bolt

• Can be upgraded up to heavier options (up to ~120 lbs available)

• Allows tuning for power vs. ease of cocking

Magazine-Fed Repeater System

• 8-round removable magazine

• Spring-fed system with follower

• Auto-loading mechanism (not semi-auto, but fast cycling)

The system works by “breaking” or pulling back the stock, which:

• Cocks the string

• Loads the next round

• Prepares the trigger

Cocking Mechanism

• Shoulder-supported operation

• Pull stock inward to cock

• Very easy with 35 lb limb

• Allows relatively fast follow-up shots once familiar

Sighting System

• Fiber optic front sight

• Rear alignment via top trough channel

While simple, it works well for close-range shooting. However, the included Picatinny rails (top and bottom) allow for:

• Red dots

• Scopes

• Tactical accessories

Build & Ergonomics

• Polymer lower with reinforced components

• AR-style adjustable stock

• Adjustable cheek rest

• Rubber butt pad

• Included foregrip (user-installed)

Overall, the Steambow B08 .68 Caliber Tactical Crossbow has a solid, lightweight feel while still maintaining good handling characteristics.

What’s Included in the Box

The B08 comes well-packaged with multiple internal boxes and includes:

• Steambow B08 main unit

• 35 lb limb

• Foregrip

• 8-round magazine

• 25 “foam” balls (closer to hard nylon in feel)

• Protective shooting glasses

• Allen keys (for assembly and adjustments)

• String wax

• Extra string

• Mounting hardware

• Instruction manual

View fullsize

Note:
A small locking component for the upper assembly may come separate and is not clearly explained in the manual, but is required for proper function.

Operation Overview

• Load magazine with up to 8 rounds

• Insert magazine into front housing

• Cock by pulling stock inward

• Fire using single-action trigger

The ball is held in place by a simple groove and string system, guiding it forward during firing.

Performance Notes (Initial Impressions)

• Smooth and reliable operation

• Easy to cock with 35 lb limb

• Suitable for indoor shooting environments

• Compatible with various projectile types

Heavier limbs will:

• Increase velocity and energy

• Require more effort to cock

View fullsize

Pros

• Lightweight and compact (under 4 lbs)

• Modular system (compatible with M10 platform)

• Magazine-fed repeater design

• Easy cocking with included limb

• Quick-change limb system

• Picatinny rails for accessories

• Comes with useful extras

• Quiet operation

• Reusable ammunition options

Cons

• Higher price point

• No traditional rear sight included

• Learning curve for efficient operation

• Included limb may feel underpowered for some users

View fullsize

Final Thoughts

The Steambow B08 offers a unique blend of crossbow mechanics and tactical styling, combined with modular flexibility and relatively safe indoor usability. It’s especially appealing for users who want:

• A reusable ammo platform

• Quick follow-up shots

• Expandability with other Steambow systems

While the included 35 lb limb keeps it easy to use and accessible, upgrading the limb will unlock more performance potential for those looking for higher energy output.

Availability

Available through Replica Airguns:

• Buy the Steambow B08 .68 Caliber Crossbow in Canada

• US Archery Buying Options

A full shooting test and performance breakdown will follow in a separate review.

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.

Today we’re looking at the A&K M1873R (the R version). There are a few different versions of this rifle in the lineup (some more compact, some more full-length), and the manual actually shows the variations so watch the video where I point that out.

This is a Table Top Review only, so we’re focusing on specs, details, and a walk-around. I was hoping to follow this up quickly with a Shooting / Field Test Video, but my sample has an issue: it’s leaking gas when I try to fill it (I tested with propane/green gas). I’ll need to sort that out first (repair or replacement), so the field test will have to wait until that’s resolved.

Here some links where you can buy the A&K M1873R in our Canada Replica Airguns and US Replica Airguns Stores

View fullsize

Specifications

• Manufactured By: A&K – Made in China

• Type: Gas-powered airsoft lever action rifle (non-blowback)

• Ammunition: 6mm plastic airsoft BBs

• Power Source: Green gas / propane (internal gas reservoir)

• Action: Lever action / manual cycle (one shot per lever cycle)

• Capacity: 25-round internal magazine (side loading gate)

• Velocity: Approx. 350–400 FPS with 0.20g BBs (temperature/BB weight dependent)

• Hop-Up: Adjustable hop-up system

• Build / Materials:

  • Real wood stock

  • Metal receiver and barrel assembly

  • M-LOK handguard (tactical “modern western” styling)

  • Top Picatinny rail (optics ready)

  • Brass butt plate

• Controls / Features:

  • Enlarged lever loop (glove-friendly)

  • Integrated lanyard ring / sling hoop

• Weight: 4.8 lbs (2.18 kg)

• Overall Length: 27.2 inches (69 cm)

• Barrel Length: 8 inches (20.3 cm)

In the Box

• A&K M1873R rifle

• Mock suppressor (cosmetic)

• Speed loader (you’ll want this for loading the internal magazine)

• Tools / Allen keys

• Small bag of airsoft BBs

• Simple 1-page manual

View fullsize

Manual Notes: Different Versions

The manual shows several versions of this lever action platform. Some are more compact and some are more traditional full-length lever rifles. There’s also a version that appears to run without the longer front barrel extension setup, which, honestly, is the version I’d personally lean toward since the included mock suppressor is mostly cosmetic.

Walk Around

This is a really sharp-looking rifle, it has that classic lever gun vibe thanks to the real wood stock and brass butt plate, but then it mixes in a modern tactical look with the M-LOK hand-guard and top Picatinny rail.

A few key points when handling it:

• No sights included: there are no iron sights on this rifle, so you’ll want to add your own optic (red dot, scope, or rail-mounted irons).

• M-LOK handguard + top rail: lots of freedom to build the look you want, keep it clean, or “tactical western” it up with accessories.

• Internal mag / side loading gate: loads like a real lever gun, through the side. The external profile stays clean (no big mag hanging out).

• Enlarged lever loop: easier to run with gloves or bigger hands, and it just looks right on this style of rifle.

• Sling / carry: it includes a metal lanyard ring / sling hoop, so carrying it is easy if you want it strapped while moving around.

View fullsize

Mock Suppressor and Gas Fill

The included “suppressor” is mainly for looks. It does have an orange front, and it doesn’t function as a suppressor (it’s not extending the inner barrel either).

Important practical detail: you’ll need to remove the mock suppressor to access the gas fill valve, which means you’ll want to keep the included tool (or something similar like a washer/coin that fits) with you.

Issue With My Sample: Leaking Gas

My review sample is leaking at the fill area. It looks like someone may have tried to seal it (there appears to be silicone or residue), and there are a few scratches that make me suspect this unit could have been a return. I tried tightening it, but it still leaks and it may be stripped.

This is not what you should expect out of a normal new unit, but I want to mention it because it’s the reason I’m holding off on the field test until it’s fixed.

View fullsize

Pros

• A lever action gas Airsoft rifle is just plain fun (and there aren’t tons of these around)

• Classic look with real wood + brass butt plate, but still has modern utility with M-LOK up front

• Feels solid in the hands (doesn’t feel cheap)

• Top Picatinny rail makes optics easy (and you’ll want optics since there are no sights)

• 25-round internal magazine keeps the outside profile clean

• Enlarged lever loop is great for gloves or cold-weather play

• Lanyard ring / sling hoop makes it easy to carry

• Speed loader makes loading fast once you get the hang of it

• You can run it more compact by skipping the mock suppressor (it’s optional)

Cons

• The internal 25-round magazine is awkward to load without the speed loader, don’t lose it

• Green gas performance is temperature sensitive, which can affect consistency in colder weather

• Not a fast follow-up shooter, you must work the lever for every shot (part of the charm, but it’s a limitation)

• You’ll need to add your own sights/optic (none included)

• The included mock suppressor must be removed to fill gas, which adds a little extra handling

View fullsize

Final Thoughts

The A&K M1873R is a really cool “modern western” mashup, classic lever action styling with real wood and brass, but with M-LOK and a top rail so you can build it out however you want. Lever guns force you to slow down and actually enjoy the shooting experience, and that’s a big part of why they’re so popular (even outside of Airsoft).

Once I get the leak issue sorted on my sample, I definitely want to do the field test, because this is exactly the kind of unique platform that deserves to be shot and evaluated properly. On the table, it looks great, feels solid, and offers a lot of customization potential, you just have to go in knowing it’s lever-action manual cycling, it uses green gas/propane (so temperature matters), and you’ll need to add your own optic since there are no sights included.

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US