We are back on the indoor range for another dedicated shooting assessment, shifting gears to focus entirely on the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle. This is a .22 caliber lever-action pellet rifle that uses CO2 and features authentic shell-ejecting and shell-loading mechanisms. For this session, the focus turns squarely to downrange performance, tracking velocity consistency over the chronograph and a dedicated paper target test to evaluate its accuracy. if you haven’t already checked out my table top review for the Barra 1866 Tactical, you can do that here
Chronograph & Velocity Baseline
The Barra 1866 Tactical is powered by dual 12 gram CO2, and for this test, we started with brand new cartridges in slightly chilly conditions just under room temperature. To establish our velocity baseline, the rifle was run with fairly heavy grain (15.43 grain) Gamo Match Diablo .22 caliber pellets across a standard testing string.
Here is how the shot string registered over the sensor:
Shot 1: 321 FPS
Shot 2: 349 FPS
Shot 3: 353 FPS
Shot 4: 333 FPS
Shot 5: 337 FPS
Average of 339 FPS with 4 foot pounds of energy
The rifle turned in an overall performance generally hovering around the mid-300 FPS mark in these slightly cooler conditions. Previously, the non-tactical brass version achieved closer to 400 FPS, suggesting that warmer temperatures and lighter pellets might yield higher velocities.
Target Accuracy & Grouping Results
Moving to the paper target, the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle was aimed using its factory open sights at a distance of 30 feet. While a pistol red dot was initially placed on the back, a dead battery meant sticking to the standard open sights. Aiming just below the bullseye, the sights centered perfectly left and right.
Cycling the lever and ejecting the shells proved to be an engaging experience. The shots struck a bit high on the target, but the rounds clustered decently once the proper zone was found. The pellets generally wanted to group about an inch and a half away from each other. Despite shooting slightly high, the rifle delivered noticeable impact energy and a solid "wallop" downrange even managing to make the target pop off the pellet backstop.
Shooting Impressions & Operational Notes
Running the Barra 1866 through a shooting sequence highlights a few distinct mechanical characteristics:
Shell Ejecting Mechanism: The shell-loading and ejecting action is highly enjoyable, adding a fun and realistic element to the shooting rhythm.
Lever Cocking Safety: A crucial operational note is that the lever must be pulled tightly to the stock to disengage the secondary safety. If the lever is not pulled tight against the stock, the rifle will not fire.
Sights: The open sights function well and center perfectly left and right, though they may shoot slightly high depending on the range.
Final Thoughts
The Barra 1866 .22 Caliber Tactical Lever Action Pellet Rifle proved to be a tremendously fun shooter. Delivering respectable velocities with heavy pellets and decent accuracy out of the box, it stands out as an engaging option for lever-action enthusiasts. For shooters seeking a realistic plinker, it remains a highly enjoyable choice.
In this table top review, we are taking a close look at the Barra 1866 Tactical CO2 Lever Action .22 Caliber Pellet Rifle. While the original classic version featured a gold receiver and faux wood stock, this updated model brings a modern tactical aesthetic to the classic Winchester 1866 platform. The biggest draw to the Tactical version is the black synthetic stock, the M-LOK handguard, and the multiple Picatinny rail options for adding modern accessories.
Key Specifications:
Model: Barra 1866 Tactical.
Type: Pellet Rifle.
Caliber: .22 caliber pellets.
Power Source: Dual 12-gram CO2 cartridges (housed in the rear buttstock).
Velocity: Claimed 450 FPS.
Action: Single-Action Lever Action Repeater.
Safety: Thumb safety behind the hammer and a secondary grip safety built into the lever.
Barrel: 18-inch rifled steel octagonal barrel.
Construction: Mostly all-metal construction with a black synthetic stock and handguard.
Weight: 6.5 lbs (2.9 kg).
Overall Length: 38.5 inches (90.7 cm).
Sights: Flip-up rear iron sight (featuring a peep notch and a lower notch).
Optics Rail: Removable short Picatinny rail over the receiver and a long continuous Picatinny rail on the handguard.
Magazine Capacity: 10-shot tube magazine (comes with 10 silver shells designed specifically for the .22 caliber version).
Handling & How It Works: Weighing in at 6.5 pounds and measuring 38.5 inches long, the Barra 1866 Tactical has an incredibly solid feel thanks to its heavy metal receiver and barrel. This is a single-action lever action repeater, meaning you must manually cycle the lever to cock the hammer and load a shell into the breach for every shot. To fire, you load the individual shells into the tube magazine, rack the paracord-wrapped lever downwards to chamber a round, ensure the lever is squeezed snug against the stock to disengage the secondary safety, and pull the metal trigger. When you rack the lever again, the empty shell ejects straight out the top of the action just like the real deal.
Pros:
Excellent heavy weight and realistic feel thanks to the nearly all-metal construction.
The sleek black synthetic stock and M-LOK handguard completely update the classic platform into a modern tactical rifle.
Very few replica rifles are available in .22 caliber, which offers fantastic downrange energy and impact.
Abundant mounting options: M-LOK slots and multiple Picatinny rails make it incredibly easy to add red dots, flashlights, lasers, or bipods.
The custom paracord-wrapped lever handle looks great and improves grip comfort during cycling.
Dual 12-gram CO2 system provides a very cost-effective power source with less cool-down effect than a single cartridge, allowing for extended shooting sessions.
Operating the lever and watching the empty casings eject vertically makes this gun incredibly rewarding and fun to shoot.
The claimed 450 fps gives you plenty of power for mid-range target shooting and small pest control.
Cons:
Because the empty shells eject vertically straight out of the top, you cannot easily mount a traditional magnified rifle scope directly over the receiver; an offset red dot or long eye-relief pistol scope mounted further forward is required.
You will inevitably lose some of the ejecting shells if you shoot outdoors in the grass, so picking up a spare set is highly recommended.
The lever must be held firmly snug against the stock while shooting, otherwise the built-in secondary safety will prevent the trigger from pulling.
If you are looking for a fun, realistic lever-action repeater that combines nostalgic shell-ejecting operation with modern tactical accessory compatibility, the Barra 1866 Tactical is a fantastic option. Stay tuned for the Field Test Shooting video coming up shortly.
Getting a mystery box from the Canadian Replica Airguns warehouse feels a lot like Christmas and we are getting closer to Christmas... Today's unboxing was a tall package, and while it contained some excellent accessories, including Gear Stock 6mm airsoft BBs, a UV-activated Airsoft tracer unit, and a LiPo safety bag—the real highlights were two very distinct lever-action rifles.
The first rifle out of the box is the Barra 1866 Tactical CO2 Edition. It takes the classic 1866 lever-action platform and gives it a highly modular, modernized upgrade.
Initial Thoughts & Basic Specs:
Ammunition & Power: This model is a .22 caliber pellet rifle that runs on a dual CO2 system housed in the back.
Realistic Operation: It features a fully functional shell-ejecting system and includes ten metallic shells.
Smooth Action: Operating the lever action on this rifle feels incredibly smooth.
Tactical Upgrades: The tactical design includes top and bottom Picatinny rails and an octagonal barrel.
Sighting: The rifle comes with a front sight and a versatile rear sight that functions as a notch or flips up into a peep sight.
The second rifle is the Daisy 499B Match Grade Champion, famously billed as the world's most accurate BB gun. It feels essentially like a highly enhanced Daisy Red Ryder on steroids.
Initial Thoughts & Basic Specs:
Premium Build: This is a full-sized rifle featuring a beautiful, fully wooden stock and forend. It is noticeably longer and more robust than a standard Red Ryder.
Action: The metal lever produces a heavy, satisfying clunk when cocked during a dry fire.
Competition Sights: Built for precision, it utilizes a front peep sight and a very small rear peep sight.
Extras: A heavy-duty shooting sling is included in the box.
Target Audience: While it is a fantastic platform for younger shooters, its larger size and premium quality make it highly suitable for older youths and adults.
I am incredibly excited to put both of these lever actions to the test. I will be producing full tabletop and field test shooting videos for both rifles very soon, so stay tuned.
Today I am testing out the Crosman 2240XL Special Edition here in the Sea Can indoor shooting range. It is getting a bit colder and raining outside, but the Sea Can is sitting at a comfortable 19 to 22 degrees Celsius, providing a great baseline environment for testing a fresh CO2 cartridge. If you haven't already, be sure to check out the dedicated Table Top Review for all the specifications and build details on this model. For this field test, our focus is entirely on performance: running it through the chronograph for real-world velocity and testing the downrange accuracy.
Chronograph & Velocity Performance For the velocity baseline, I used a brand new CO2 cartridge and loaded up some heavier .22 caliber Crosman Premier Hollow Points, which sit around the 14 to 15-grain mark. Crosman claims around 460 FPS on the box, but keep in mind that is typically achieved using the lightest possible ammunition.
Here is how the 5-shot string performed through the chronograph:
Shot 1: 329 FPS
Shot 2: 330 FPS
Shot 3: 337 FPS
Shot 4: 335 FPS
Shot 5: 335 FPS
The Crosman 2240XL Special Edition settled in nicely around a 333 FPS average. Because this is a bolt-action setup rather than a fast-firing semi-auto, the CO2 doesn't cool down too rapidly between shots, which helps keep the velocity remarkably consistent across the string.
Downrange Accuracy & Target Testing Moving over to the accuracy test, I set up a fresh paper target 30 feet downrange. For this setup, I decided to mount a bit of a monstrosity of a 4x optical magnification scope using the dovetail mounts, which I pulled right off another gun just for this test.
I took about 9 shots from a rested position on the table. The first two shots were close together, but the grouping eventually opened up to about 2 inches, including one major flyer that I definitely didn't feel like I pulled. Honestly, I wasn't super impressed with this particular grouping. The 2240 platform is famous for its accuracy, so this spread might be down to a few different factors: potential nicks on the pellets during loading, the cheap optical sight I attached, or just user error while trying to stabilize it.
Handling Notes & Optics Fitment One of the absolute highlights of the Crosman 2240XL Special Edition is the trigger. It has a very nice, light, and short pull with essentially zero break required. However, shooting a pistol with a magnified scope from a rested position proved to be awkward. Trying to pull a pistol-length platform close to your face for proper eye relief (using a rifle scope rather than a pistol scope) can make everything feel quite shaky.
If you plan on running a larger optic like this, I highly recommend adding a shoulder stock to help stabilize the gun. Alternatively, swapping the massive scope out for a compact red dot or sticking to standard pistol sights would make this much more comfortable to shoot in its stock pistol form.
Final Thoughts The Crosman 2240XL remains an incredibly highly modifiable platform, fitting right in with the various pumper and .177 caliber variants available on the market. While my grouping today wasn't the tightest, the potential of this gun is massive once you dial in the right optics, ammo, and perhaps a stock for better stability.
Welcome back to Replica Airguns. I get asked all the time about which airguns hit the hardest, but a lot of people focus on the wrong attributes. They often look strictly at velocity instead of the raw energy and blunt force required for different tasks.
In this guide, we are breaking down the four main types of airgun ammunition: Airsoft, steel BBs, lead pellets, and rubber balls. The goal is to show you exactly what each ammo type excels at and where they fall short so you can choose the right tool for your specific needs.
6mm Airsoft: Safe Training and Plinking
Airsoft guns fire 6mm round balls, which are generally made of plastic, though you can find copper or zinc-coated variants. Because these are some of the lightest projectiles, ranging from 0.20 to 0.45 grams, they have the lowest overall energy and often lower velocities.
Best For: Airsoft is ideal for force-on-force skirmishes (with proper eye protection) because the lightweight rounds sting but do not penetrate the skin.
Practical Uses: They are great for safe indoor garage shooting without the risk of breaking windows, or for humanely chasing nuisance crows or vermin out of your yard without causing them permanent harm.
Platform Tech: Heavier airsoft rounds utilize backspin, or "hop-up", to float straight through the air for better accuracy, and they are typically fired from highly realistic, full-blowback gas or CO2 replica pistols. Most rifle Airsoft guns are AEG’s using a battery and spring setup which allows for easy semi and full auto operation.
Worst For: These are entirely ineffective for pest control (extermination) or any scenario requiring deep penetration or high impact energy.
4.5mm Steel BBs: Fast-Action Shooting
Steel BBs are 4.5mm in diameter, which translates to a .177 caliber round ball. Weighing in at approximately 5.3 grains, they are much denser than Airsoft rounds.
Best For: Steel BBs are fantastic for fast-action plinking, breaking glass bottles, and tearing up pop cans.
Platform Features: These are often used in 1-to-1 replica blowback pistols with drop-out full size magazines, giving shooters an authentic firearm feel for tactical manipulation practice.
The Dangers: Steel does not deform upon impact, meaning these BBs are highly prone to dangerous ricochets if you shoot at hard surfaces indoors or up close.
Worst For: Steel BBs lack the blunt force for home defense and are unethical for pest control as trey are a bit under powered and generally not as accurate as similar pellet guns.
Lead Pellets (.177 and .22 Caliber): Precision and Pests
Unlike round BBs, pellets are designed to be fired through a rifled barrel. Common sizes include .177 caliber (4.5mm, weighing 5 to 10 grains) and the much heavier .22 caliber (5.5mm, weighing 12 to 16 grains).
Best For: The soft lead engages the spiral grooves in a rifled barrel, providing unmatched precision and accuracy.
Terminal Ballistics: Because lead is soft, it expands and flattens upon impact, transferring its heavy kinetic energy directly into the target.
Practical Uses: This improved energy transfer makes pellets the ethical choice for small pest control.
Worst For: Pellet platforms are rarely designed as rapid-fire action shooters; they typically utilize slower single-shot (bolt actions) or rotary magazines that can require a bit of trigger finger strength to shoot quickly.
Rubber Balls (.43, .50, and .68 Caliber): Less-Lethal Blunt Force
This category represents the heavy hitters, firing massive projectiles that range from soft sponge rubber to dense steel-core balls, dust balls, and pepper balls.
The Power Factor: A .68 caliber home defense marker can produce upwards of 20-50 Joules (or roughly 15-35 foot-pounds) of energy with dedicated home defense styled Rubber Ball Guns.
Best For: The .68 caliber and high-powered .50 caliber options are explicitly designed for less-lethal home defense.
How They Work: Instead of penetrating, these massive projectiles dump incredible raw energy and blunt force directly onto the target, effectively stopping threats through extreme pain.
Training Options: The smaller .43 caliber variants are frequently chambered in realistic blowback replica pistols, making them excellent for tactical and paintball-style force-on-force training.
At the end of the day, picking the right Airgun comes down to matching the ammunition mass and energy to your target. You can find all the gear discussed here, from Airsoft replicas to less-lethal launchers, at the Replica Airguns Canada and US stores. Make sure you are subscribed to our channels across Rumble, YouTube, Vimeo, Instagram, X and Facebook for more detailed reviews and field tests.
In this table top review, we are taking a close look at the Crosman 2240XL Special Edition, a .22 Caliber CO2 Pellet Pistol. While I haven't shot this exact model yet, I have shot the standard 2240 non-XL version, and they share a very similar firing mechanism. The biggest draw to the XL version is the factory-upgraded metal breech with an 11mm dovetail rail, and the threaded muzzle for added versatility.
Key Specifications:
Model: Crosman 2240XL Special Edition
Type: Pellet Pistol
Caliber: .22 caliber lead pellets
Power Source: 12-gram CO2 (1 cartridge)
Velocity: Up to 460 FPS
Action: Single-Shot Bolt Action
Safety: Cross-Bolt Safety
Barrel: Rifled Steel Barrel, Threaded muzzle (1/2" x 20 threads)
Stock/Grips: Plastic grips
Construction: Mostly metal (steel breech, barrel, loading chamber) with plastic grips
Weight: 1.8 lbs
Overall Length: 12.5 inches
Sights: None included
Optics Rail: 11mm Dovetail Rail
First Impressions & Build Quality: The 2240XL brings a much-needed factory upgrade to the legendary 2240 platform: a full steel breech. This alone is a huge addition, making the gun stand out and providing a much higher quality feel. The gun is almost entirely metal, including the barrel, CO2 loading chamber, bolt, and breech. The grips are plastic, which is fairly standard, but one of the best things about the Crosman 2240 platform is how highly customizable it is. There are countless aftermarket parts available, and you can even easily swap out the grips fro wood grips or for a Crosman shoulder stock to turn it into a backpacker-style carbine.
Weighing in at 1.8 pounds and measuring 12.5 inches long, The Crosman 2240XL Special Edition has a solid feel in the hand. The threaded barrel comes with a thread protector and gives you options for adding mock suppressors or other attachments.
How It Works: This is a single-action, bolt-action pellet pistol. To operate it, you must first cock the bolt and manually load a .22 caliber pellet into the chamber. Once the bolt is pushed forward and locked down, the trigger is engaged and ready to fire. Powered by a single 12-gram CO2 cartridge housed in the lower tube, it is capable of firing up to 460 FPS depending on the weight of the pellets used. Because it's a single-shot bolt action, you'll need to manually load a pellet for every shot, but you won't need to pump it since the CO2 provides the power.
Pros:
Upgraded steel breech from the factory provides a robust build and premium look.
Built-in 11mm dovetail rail makes adding a red dot or magnified optic easy.
Threaded muzzle (1/2" x 20 threads) with an included thread protector for attachments.
Solid CO2 power at up to 460 FPS.
Highly customizable platform with endless aftermarket parts available.
Excellent light single-action trigger with very little take-up.
Mostly metal construction ensures long-lasting durability.
Cons:
Does not come with any open sights, an optic is required out of the box.
Relies on CO2, meaning velocities will fluctuate as the gun cools down during rapid fire and potentially as CO2 volume lowers.
Standard plastic grips are somewhat basic.
Final Thoughts: The Crosman 2240XL Special Edition takes an already proven pistol and adds the features most shooters end up buying aftermarket anyway. Having the steel breech and dovetail rail right out of the box makes mounting an optic straightforward, and the threaded muzzle is a fantastic touch, even if it’s just mainly for looks. If you're looking for a powerful .22 caliber airgun for small pest control that can be modified to your exact liking, the 2240XL is a superb starting point.
Stay tuned for the Field Test Shooting video coming up down the road.
We are halfway through September, and another unannounced delivery just showed up at the door. This box was surprisingly compact but incredibly dense, hinting at a hefty amount of possible ammunition inside. Cracking it open revealed a massive 4,000-count bottle of BBs and an updated classic from Crosman.
The sheer weight of this package came from a bulk 4,000-round bottle of Gear Stock 4.5mm steel BBs. These specific rounds feature a copper coating, which looks great but comes with a few historical caveats.
Copper vs. Zinc: In my experience, copper-coated BBs can tarnish over time. Unlike zinc, which stays relatively clean, older copper coatings can oxidize and leave a dark, powdery residue on your hands and inside your airgun's barrel.
Quality Check: If you burn through your ammo quickly, the tarnishing won't be an issue. We will have to see if modern manufacturing has improved the coating durability on this Gear Stock batch, but I typically lean toward zinc-coated BBs for long-term storage and cleaner shooting.
The main event in this box is the Crosman 2240 XL. The 2240 platform has been a staple in the airgun community for decades, and the XL version finally addresses the most common pain points shooters had with the base model out of the box.
Core Specs: The 2240 XL is a CO2-powered, bolt-action, single-shot pistol chambered in .22 caliber. It weighs in at 1.8 pounds, features a rifled steel barrel, and utilizes a standard 12-gram CO2 cartridge.
The Metal Breech Upgrade: The standard 2240 and its multi-pump cousin, the 1322, utilize a plastic breech. Mounting an optic on those older models requires clamp-on barrel adapter rings, which can easily twist out of alignment. The 2240 XL ships with an upgraded all-metal breech featuring a milled 11mm dovetail rail, allowing for a rock-solid red dot or scope mount straight from the factory.
Threaded Muzzle: The front of the barrel has a threaded muzzle cap. You can unscrew the tip to attach 1/2" UNF aftermarket compensators or moderators, adding another layer of customization.
Because the 2240 XL features a dovetail rail instead of iron sights, it is built specifically for optics. This plays perfectly into the massive aftermarket support for Crosman’s 22xx and 13xx platforms.
I own a heavily modified "backpacker" setup on one of my personal Crosman .22s, featuring a skeletonized rear shoulder stock and a magnified scope. At sub-500 FPS, a .22 caliber pellet is highly effective for close-range pest control. When dealing with nuisance animals like crows attacking songbirds, an ultra-high-velocity pellet will often pass straight through the target, wasting its kinetic energy. A heavier .22 pellet moving at moderate speeds dumps its full energy upon impact, providing a much more immediate and humane dispatch.
The full tabletop and field test shooting videos for the Crosman 2240 XL are coming up next. Make sure you are subscribed on Rumble, Vimeo, X, Threads, or TikTok to catch the full performance breakdown when it goes live.
I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.
Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.
Capacity: 400-round main reservoir + 25-round ready magazine
Action: Full auto
Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.
Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.
Feed system: 8-round magazine + 120-round reservoir built into the mag
Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.
Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.
Capacity: 400 BBs
How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines
Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.
Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.
Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box
Caliber: .25 only
Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)
Positioning: Built for small game / pest work and “preparedness” minded buyers
Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.
S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.
We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.
New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.
Caliber shown: .22
Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.
Frame/version: brass frame first, with other versions planned.
Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.
Early price talk: roughly $400–$500 range (with cartridges), but still TBD.
1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).
Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.
Calibers: .22 is the focus (with .177 also planned/available).
New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.
Uses flat bands (easy to swap/upgrade for strength/velocity).
Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.
Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.
Sights/optics: adjustable iron sights plus Picatinny rail for optics.
Calibers mentioned/planned: .177 / .22 / .25.
New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:
Rotary magazine (prototype shown in .30 cal, 8 rounds)
Power testing target: up to ~80 ft-lb in .30 cal
Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.
Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.
Features: adjustable cheek rest, M-LOK fore-end
Timing: Q2 target for the 270Z; Q3 target for the 300Z.
Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.
In this Field Test Shooting video for the Umarex Marlin Old West CO2 BB Revolver I check real-world performance: first I measure fps using a fresh standard 12-gram CO2 cartridge and 4.5 mm steel BBs through my chronograph. After that I hang a paper target at 30 feet and fire 10 rounds using the Single-Action-Only trigger to see what kind of grouping the revolver delivers straight out of the box. If you haven’t already seen my Tabletop Video Review for the John Wayne Marshal CO2 BB Revolver, watch that for full specs and close-up footage.
For the velocity test I put five shots through the chronograph. The slowest registered 345 fps and the fastest hit 416 fps, with an average of 403 fps, right in line with Umarex’s claimed 400 fps. Perfect for popping cans and casual plinking out to roughly 30–40 feet. The test was done inside a sea can at about 18°C (≈64°F), which gives a middle-of-the-road CO2 performance; warmer weather will typically push velocities higher.
Next I set the paper target on my pellet trap at 30 feet. Using my usual semi-rested position (hands braced on a front sandbag and seated on a stool), I fired 10 rounds with the Marlin Old West. The group measured roughly 4 inches, a bit left and just slightly high from the bullseye — not far off and similar to the grouping I got with the John Wayne Marshal CO2 BB Revolver, although the Marlin’s velocity numbers were notably higher.
The Umarex Marlin Old West CO2 BB Revolver is an inexpensive, mostly-plastic Single Action Army style revolver. There’s a fair amount of polymer in the construction, but it still feels solid despite being on the lighter side. That lighter weight can make the gun feel a bit twitchy in the hand compared with heavier replicas, which can affect accuracy. At the time of this video the Canadian price was about $99, which makes it good value — especially since it loads 18 rounds quickly compared with traditional shell-loading revolvers, meaning more trigger time with less fuss. There are a number of similar replica revolvers available from our Replica Airguns stores in Canada and the US, so check our stock if you’re shopping around.
Type: BB Pistol. Manufacturer: Distributed by Umarex Model: Marlin Old West Revolver Materials: Mostly plastic, some internal metal parts. Weight: 1.2 pound (544 grams). Total Length: 10.5 inches (26.6cm). Barrel: 5.5 inches 14cm) metal non-rifled. Propulsion: CO2. Action: Revolver SAO. Ammunition Type: 4.5mm Steel BB’s. Ammunition Capacity: 18 round internal magazine. FPS: Claimed 400.
Trigger Pull: The trigger on the Umarex Marlin Old West CO2 BB Revolver is single-action-only, so you must cock the hammer before each shot. That removes most of the trigger travel and effort, giving the Marshal a short, light, and easy-to-manage pull. It’s ideal for deliberate, accurate shooting, but less suited to action-style rapid fire unless you’ve got a very fast thumb.
Accuracy: I haven’t tested the Marlin Old West model specifically, but it should perform very similarly to the John Wayne Marshal CO2 BB revolver, they’re nearly identical aside from licensing, safety, and magazine placement. In my field test of the John Wayne Marshal it averaged closer to 360 fps rather than the claimed 420 fps and produced roughly a 4-inch, 10-shot group at 30 feet. You can watch that video here; I’ll hope to be posting a dedicated field test for the Umarex Marlin Old West soon.
Build Quality: There’s not a lot to get excited about in terms of materials, the Umarex Marlin Old West CO2 BB Revolver is mostly plastic with some internal metal parts like the barrel, trigger, hammer, and CO2 components. It follows the common two-half, screwed-together budget construction, which looks cleaner on the side where the screws are hidden. At just over a pound it’s fairly light. With relatively few moving parts, it should be reasonably reliable; the mechanical components do what they need to do and feel suitably solid for the price.
Realism: At first glance the John Wayne Marshal CO2 BB revolver resembles a Colt Single Action Army Revolver in shape and size, but it’s much lighter, about half the weight. The lack of real bullet openings in the cylinder (when viewed from the front) reduces realism. I’m used to the newer generation of revolvers with working cylinders and loadable, removable shells; those are pricier and hold fewer rounds, but they offer a much more authentic experience.
Pros:
A decent looking replica of a Colt Single Action Army Revolver.
Single action only trigger is short and light and well suited to careful shot placement shooting.
400 claimed fps is about perfect for plinking at ranges up 30-40 feet.
18 round magazine has a nice high capacity and easy to load when empty.
Should get lots of shots per CO2.
Safety is well hidden underneath just in front of the trigger guard.
I like the look with the all black receiver and simulated wood grips.
CO2 Allen key is built into grip so always have it on hand and will not lose it.
Marlin licensed and seems to be $50 less than the almost exact same John Wayne version.
Cons:
Mostly plastic builds makes it a bit light in the hand.
No fake shell holes in the front of the cylinder, could have added this for a more genuine look.
Not a big fan of the clamshell plastic packaging.
Comments: The Umarex Marlin Old West CO2 BB Revolver is a solid choice if you want an old-west single-action cowboy BB shooter for less than the nearly identical John Wayne Marshal (it’s about $50 cheaper). If you want more authenticity, consider one of the shell-loading Single Action Army style revolvers, they cost more, shoot a bit slower, and carry fewer rounds, but they deliver a much higher level of realism.
Yet another Mystery box with good stuff inside for me to discover and checkout and share with everyone! In this Replica Airguns August 2025 Mystery Box Video I reviewed three products from Umarex, and all of them are some sort of BB gun related product, one pistol, one revolver and one rifle and interestingly not all are CO2, as one is AEG powered which is more or less a new thing with steel BB guns. Barra introduced their 400e AEG AR Steel BB Rifle a while back and now Umarex has their own version of a similar AEG BB rifle in a sightly more true AR platform called the Umarex AER16.
The Umarex Marlin CO2 BB Revolver is really just a Marline licensed version of their Marshal CO2 BB Revolver but it us $50 less so unless you really want the Marshal licensing then go for the newer Marline version. Another Umarex product out of this months Mystery Box was the Umarex DS11 1911 NBB CO2 BB Pistol which is a pretty basic almost all plastic NBB CO2 BB Tactical 1911 that uses the standard metal BB Stick magazines. It does however look a lot better than most of these simple NBB Plastic BB Pistols on the market so in terms of looks it has that going for it for sure.
I also got a few accessor items from a company called GEAR STOCK, Some CO2 in 12 and 88 gram along with some 6mm aluminum Airsoft BB’s. A very cool rechargeable red and green laser that comes in a nice hard shell case and it has a picatinny rail on the bottom she you can stack a second accessory under it.
Here are some links and specs for the Airguns I show off in this mystery box video:
In this Field Test Shooting Review, I test the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in the Replica Airguns Indoor Sea Can Shooting Range to find out what the real world velocity is in fps. I also shoot some .20 gram and .40 gram Airsoft BB’s at a paper target setup 30 feet down range to see what kind of accuracy I can achieve with a 6 round grouping. If you are also interested in more information like specifications and details along with some more close up video of the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver, then make sure to watch my Table Top Video for this rather chunky Shell Loading Airsoft Revolver.
Starting with my Chronograph Velocity Test, I loaded up a brand new 12 gram CO2 Cartridge and loaded 6 .20 gram Airsoft BB’s into the cylinder. My average 6 shot velocity of 514 fps was even a bit higher than what Umarex claims which is 500 fps. The fastest Airsoft BB was clocked at 531 fps with the slowest BB hitting a respectable 490 fps. That’s moving pretty fast for sure, probably a bit quick for close quarters indoor Airsoft games? Temperature was right around room temperature.
I was going to only test out the .20 gram Airsoft BB’s for my accuracy part of the Field Test, but the high velocity was not working all that well with the lighter .20 gram Airsoft BB’s. I only got around an 8 inch grouping as the lighter .20 gram Airsoft BB’s really wanted to curl though the air. I felt the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver could do a lot better using a heaver Airsoft BB’s so I redid my Accuracy Test, but this time using .40 gram Airsoft BB’s, and this for sure gave me much better results. 3 of the 6 Airsoft rounds made a single hole just above the bulls-eye fairly well centered with 2 shots increasing the grouping slightly to around 2 inches and 1 shot that came out a bit which I will classify as a flyer but if you include it, the grouping was more or less around 5 inches, still a lot better than the .20 gram Airsoft BB’s.
All in all the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is one of the nicest shell loading Airsoft Revolvers I have reviewed, and I do hope that one day it is available in a Steel BB version. I do recommend for sure using heavier Airsoft BB for better accuracy, and again if you are a smaller person or young adult, this Revolver may be a bit chunky at around 3 pounds. The single action trigger is very usable for precise shot placement, but I would say it is not overly light. Of course you can shoot double action if you want to unload the 6 rounds quickly when action shooting. I do like that Umarex has gone with larger shells and a beefier cylinder which is a lot closer to what your would expect from a 44 magnum in terms of shell casing size. If you want the ultimate Shell Loading Airsoft Revolver than this one is for sure on the top of the list!
Type: Revolver CO2 Airsoft Pistol. Manufacturer: Distributed by Umarex. Model:Smith & Wesson 629 Competitor. Materials: Mostly all Metal. Weight: 3.3 pounds (1.55 kg). Total Length: 12 inches (30.5cm) Barrel: 6 inches (15cm) metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 6 round cylinder. Velocity: Claimed 500fps.
Trigger Pull: The Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver shoots in either single action or double action. If you pull the hammer back, you can shoot in single action which will give you a super short trigger pull with virtually no takeup and a very light and predictable release, perfect for when you are wanting the best possible accuracy out of this Airsoft Revolver. You can also simply just pull the trigger in double action which means your trigger finger is doing all the work of pulling back the hammer and releasing it which is a much longer trigger pull that is between medium and heavy pull, but still fine for quicker action shooting.
Accuracy: So far I have not shot the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver but I have shot a lot of similar shell loading 6 shooter revolvers. Yes the cylinder and the actual shells are a bit larger but this should not really affect accuracy or power. Umarex does claim a max velocity of 500 fps which does seem high, so it will be interesting to see if the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver will actually hit these numbers. In my past Field Test Shooting Video Reviews I am generally able to get at least a 2 inch 6 shot groupings from 30 feet away from my paper target so hopefully that is the case with the S&W 629 Competitor.
Build Quality: If you’re looking for a very solid and hefty Airsoft revolver, than I don’t think there is anything more beefy than the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver. It is a whopping 3.3 pounds and is almost all metal so smaller handed shooters may find this one a bit too much to hold comfortably. Fit and finish is very good and I do really like the satin stainless steel look to it even though Umarex calls it a chrome finish.
Realism: I like the shell loading revolvers for the added realism you get manually loading the cylinder with 6 preloaded shells. In almost all of the shell loading 6 shooter revolvers, the cylinder and shells are actually smaller than what you would find in a real steel 6 shooter revolver, especially the Single Action Army Revolvers as they would normally shoot a .45 caliber shell rather than a .38 caliber shells. So it is nice that Umarex didn’t just go with already to go parts and they gave the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver newly designed larger shells and a larger cylinder, maybe the shells are not actually .44 caliber in size but the larger cylinder and larger shells does give it more realism. Of course almost all the parts function just like they would in a real steel revolver.
Pros:
Almost all Metal build with a very heavy weight of 3.3 pounds.
Full adjustable rear sight for windage and elevation.
Comes with 12 reloadable shells, most only come with 6 shells.
Grooved Pistol Grips for added comfort and grip.
Picatinny rail on top of barrel for adding a red dot or optional sight.
Nice Smith & Wesson markings on gun stamped into the frame.
Option of shooting in single or double action, nice light single action trigger.
I like the satin stainless finish.
Super realistic loading and shooting with the removable shells.
Cons:
Does come with an orange tip.
No adjustable hop-up I can see.
Rather large and heavy so not great for younger or smaller handed shooters.
Velocity may be a bit hot for some Airsoft games.
Comments:
I think my main takeaway for the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is that Umarex has a new larger shell and cylinder design, which is closer to the actual shell and cylinder size of a .44 magnum, so maybe we will see this design coming out in future shell loading revolvers. Other noticeable features are for sure the size and weight of this beast. If you add a red dot or optical sight to it, then this Airsoft revolver could weigh in at nearly 4 pounds! If you want the ultimate shell loading revolver than this is probably going to be the choice to go with, unless you want it in 4.5mm steel BB or Pellet versions as at least for right now, it is only available in an Airsoft version, maybe that will change down the road…
In this Mystery Box Unboxing Video I take a look at three Airsoft products, two pistols from Umarex and two AEG Airsoft Rifles from Specna Arms. As this is essentially an Unboxing Preview Video, I don’t go into a lot of detail for each item as this is my first real exposure to these items for the most part. I will be making full Table Top and Field Test Video for each item once I get to know them a bit better and share all the specifications and features along with shooting performance.
Starting with the Umarex products, I did get the chance to checkout the Umarex Smith & Wesson 629 CO2 Airsoft Revolver at this years SHOT Show, and it is a very solid shell loading 44 Magnum styled Revolver with full Smith and Wesson licensing. From what I remember this item may only come in the Airsoft version at the time of this review and it does have a claimed velocity of 500 which may be a bit hot for Airsoft games but it would be a lot of fun shooting at pop cans and the likes.
The second Umarex products is a pretty basic mostly clear plastic Spring Powered Beretta 92 FS Airsoft Pistol. It is fairly light weight with it’s mostly all plastic construction and the velocity is also on the lower side at only around 250 fps. Since it is distributed by Umarex it carries the Beretta licensing which is nice and all, but on a clear plastic gun I am not sure if is really a major feature.
The first Airsoft Rifle out of the Mystery Box was the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle which is your standard AR configuration, mine was the shorter barrel version but it does come in a longer barrel version as well. The top and bottom receiver and most of the outer components are going to be Nylon Fiber Reinforced Plastic. It does include features like Rotational Hop Up Chamber, SA ETU™ Optical Electronic System Optimizes for improved trigger response and Quick Spring Change System to name a few.
Something I don’t see too often are Pink Assault Rifles! So it was nice to get the pink version of the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle. It does come in a Black and Tan version along with an all Black configuration. It’s really a great looking AEG Airsoft Rifle in any color you decide to go with, and I like the compact feel it has with lots of options for mounting accessories on the top bottom and side rails. You can get going right away using the included pop-up front and rear sights or throw a red dot or optical sight on it.
I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.
It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!
I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!
I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…
In this Field Test Shooting Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle, I get to test out a Replica .22 Caliber CO2 Rifle which I don’t get the chance to do so very often and .22 caliber combined with a Replica in a an Airgun is very uncommon! Well today I got to test one out and it was a lot of fun, I would say it performed very well for me. As usual, my main goal is to find out what the real world velocity is in fps and also to see how accurate the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is shooting at a paper target 30 feet away. Also make sure to checkout my Table Top Video for the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for more details and specifications and close up video.
First in my to-do list was the velocity portion of my Field Test, and so I loaded up dual 12 gram CO2 cartridges into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle along with 10 preloaded .22 caliber shells. By the way I was using Gamo 15.43 grain (1 gram) lead pellets and the temperature was just a bit below room temperature, so not 100% ideal for maximum velocity but still warm enough for my purposes. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle shot an average 5 shot velocity of 390 fps with the fastest shot hitting 411 fps and the slowest performer hitting 370 fps. That works out to 5.78 average foot pounds of energy.
Next up, I first recovered the 5 ejected shells I used in the velocity test, and again reloaded them with some more pellets and then back into the Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle for my accuracy test. Keep in mind with a lever action rifle, I have to remove the rifle from my shooting position each time to work the lever action and chamber a round. This does cause me to have to fully reset for each shot which does kind of break a shooting grove just a bit, but it did not seem to make much of a difference as my accuracy results where still very good. I did notice vertically the grouping was about 2 inches while side to side it was closer to 1 inch. I attribute this to the sighting system as it was hard for me to focus on the rear sight and make sure I had it perfectly level with the front sight for each shot, which would account for some variation in elevation. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle was also shooting about 2 inches high from my aim point.
I have said this a bunch of times before, but I do really love shooting lever action rifles. Even a low cost Red Ryder BB Rifle brings a smile to my face. I also have a Henry Lever Action 22LR that I also really enjoy shooting when I get the chance. The Barra 1866 Lever Action 22 Cal CO2 Pellet Rifle is a really sweet looking rifle that performs as good as it looks thankfully! It’s also well priced for what you get in my opinion at just under $300 Canadian at the time of this video. If you want a fairly powerful Replica Air Rifle that hits hard and true and is super fun to shoot then get this one but make sure to get a bunch of extras shells cause they like to disappear on you pretty quickly. For now I still have all 10 of mine but they love to hide in the craziest places when they get ejected :)
