View fullsize

We are back on the indoor range for another dedicated shooting assessment, shifting gears to focus entirely on the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle. This is a .22 caliber lever-action pellet rifle that uses CO2 and features authentic shell-ejecting and shell-loading mechanisms. For this session, the focus turns squarely to downrange performance, tracking velocity consistency over the chronograph and a dedicated paper target test to evaluate its accuracy. if you haven’t already checked out my table top review for the Barra 1866 Tactical, you can do that here

Chronograph & Velocity Baseline

The Barra 1866 Tactical is powered by dual 12 gram CO2, and for this test, we started with brand new cartridges in slightly chilly conditions just under room temperature. To establish our velocity baseline, the rifle was run with fairly heavy grain (15.43 grain) Gamo Match Diablo .22 caliber pellets across a standard testing string.

Here is how the shot string registered over the sensor:

• Shot 1: 321 FPS

• Shot 2: 349 FPS

• Shot 3: 353 FPS

• Shot 4: 333 FPS

• Shot 5: 337 FPS

• Average of 339 FPS with 4 foot pounds of energy

The rifle turned in an overall performance generally hovering around the mid-300 FPS mark in these slightly cooler conditions. Previously, the non-tactical brass version achieved closer to 400 FPS, suggesting that warmer temperatures and lighter pellets might yield higher velocities.

View fullsize

Target Accuracy & Grouping Results

Moving to the paper target, the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle was aimed using its factory open sights at a distance of 30 feet. While a pistol red dot was initially placed on the back, a dead battery meant sticking to the standard open sights. Aiming just below the bullseye, the sights centered perfectly left and right.

Cycling the lever and ejecting the shells proved to be an engaging experience. The shots struck a bit high on the target, but the rounds clustered decently once the proper zone was found. The pellets generally wanted to group about an inch and a half away from each other. Despite shooting slightly high, the rifle delivered noticeable impact energy and a solid "wallop" downrange even managing to make the target pop off the pellet backstop.

Shooting Impressions & Operational Notes

Running the Barra 1866 through a shooting sequence highlights a few distinct mechanical characteristics:

• Shell Ejecting Mechanism: The shell-loading and ejecting action is highly enjoyable, adding a fun and realistic element to the shooting rhythm.

• Lever Cocking Safety: A crucial operational note is that the lever must be pulled tightly to the stock to disengage the secondary safety. If the lever is not pulled tight against the stock, the rifle will not fire.

• Sights: The open sights function well and center perfectly left and right, though they may shoot slightly high depending on the range.

Final Thoughts

The Barra 1866 .22 Caliber Tactical Lever Action Pellet Rifle proved to be a tremendously fun shooter. Delivering respectable velocities with heavy pellets and decent accuracy out of the box, it stands out as an engaging option for lever-action enthusiasts. For shooters seeking a realistic plinker, it remains a highly enjoyable choice.

Available at:

🇨🇦 Buy the Barra 1866 Tactical in the Canada Replica Airguns Store

🇺🇸 Buy the Barra 1866 in the US Replica Airguns Store

View fullsize

In this table top review, we are taking a close look at the Barra 1866 Tactical CO2 Lever Action .22 Caliber Pellet Rifle. While the original classic version featured a gold receiver and faux wood stock, this updated model brings a modern tactical aesthetic to the classic Winchester 1866 platform. The biggest draw to the Tactical version is the black synthetic stock, the M-LOK handguard, and the multiple Picatinny rail options for adding modern accessories.

View fullsize

Key Specifications:

• Model: Barra 1866 Tactical.

• Type: Pellet Rifle.

• Caliber: .22 caliber pellets.

• Power Source: Dual 12-gram CO2 cartridges (housed in the rear buttstock).

• Velocity: Claimed 450 FPS.

• Action: Single-Action Lever Action Repeater.

• Safety: Thumb safety behind the hammer and a secondary grip safety built into the lever.

• Barrel: 18-inch rifled steel octagonal barrel.

• Construction: Mostly all-metal construction with a black synthetic stock and handguard.

• Weight: 6.5 lbs (2.9 kg).

• Overall Length: 38.5 inches (90.7 cm).

• Sights: Flip-up rear iron sight (featuring a peep notch and a lower notch).

• Optics Rail: Removable short Picatinny rail over the receiver and a long continuous Picatinny rail on the handguard.

• Magazine Capacity: 10-shot tube magazine (comes with 10 silver shells designed specifically for the .22 caliber version).

View fullsize

Handling & How It Works: Weighing in at 6.5 pounds and measuring 38.5 inches long, the Barra 1866 Tactical has an incredibly solid feel thanks to its heavy metal receiver and barrel. This is a single-action lever action repeater, meaning you must manually cycle the lever to cock the hammer and load a shell into the breach for every shot. To fire, you load the individual shells into the tube magazine, rack the paracord-wrapped lever downwards to chamber a round, ensure the lever is squeezed snug against the stock to disengage the secondary safety, and pull the metal trigger. When you rack the lever again, the empty shell ejects straight out the top of the action just like the real deal.

View fullsize

Pros:

• Excellent heavy weight and realistic feel thanks to the nearly all-metal construction.

• The sleek black synthetic stock and M-LOK handguard completely update the classic platform into a modern tactical rifle.

• Very few replica rifles are available in .22 caliber, which offers fantastic downrange energy and impact.

• Abundant mounting options: M-LOK slots and multiple Picatinny rails make it incredibly easy to add red dots, flashlights, lasers, or bipods.

• The custom paracord-wrapped lever handle looks great and improves grip comfort during cycling.

• Dual 12-gram CO2 system provides a very cost-effective power source with less cool-down effect than a single cartridge, allowing for extended shooting sessions.

• Operating the lever and watching the empty casings eject vertically makes this gun incredibly rewarding and fun to shoot.

• The claimed 450 fps gives you plenty of power for mid-range target shooting and small pest control.

View fullsize

Cons:

• Because the empty shells eject vertically straight out of the top, you cannot easily mount a traditional magnified rifle scope directly over the receiver; an offset red dot or long eye-relief pistol scope mounted further forward is required.

• You will inevitably lose some of the ejecting shells if you shoot outdoors in the grass, so picking up a spare set is highly recommended.

• The lever must be held firmly snug against the stock while shooting, otherwise the built-in secondary safety will prevent the trigger from pulling.

View fullsize

If you are looking for a fun, realistic lever-action repeater that combines nostalgic shell-ejecting operation with modern tactical accessory compatibility, the Barra 1866 Tactical is a fantastic option. Stay tuned for the Field Test Shooting video coming up shortly.

Available at:

🇨🇦 Buy the Barra 1866 Tactical in the Canada Replica Airguns Store

🇺🇸 Buy the Barra 1866 in the US Replica Airguns Store

View fullsize

Getting a mystery box from the Canadian Replica Airguns warehouse feels a lot like Christmas and we are getting closer to Christmas... Today's unboxing was a tall package, and while it contained some excellent accessories, including Gear Stock 6mm airsoft BBs, a UV-activated Airsoft tracer unit, and a LiPo safety bag—the real highlights were two very distinct lever-action rifles.

Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle

The first rifle out of the box is the Barra 1866 Tactical CO2 Edition. It takes the classic 1866 lever-action platform and gives it a highly modular, modernized upgrade.

Initial Thoughts & Basic Specs:

• Ammunition & Power: This model is a .22 caliber pellet rifle that runs on a dual CO2 system housed in the back.

• Realistic Operation: It features a fully functional shell-ejecting system and includes ten metallic shells.

• Smooth Action: Operating the lever action on this rifle feels incredibly smooth.

• Tactical Upgrades: The tactical design includes top and bottom Picatinny rails and an octagonal barrel.

• Sighting: The rifle comes with a front sight and a versatile rear sight that functions as a notch or flips up into a peep sight.

View fullsize

Daisy 499B Match Grade Champion Lever Action BB Rifle

The second rifle is the Daisy 499B Match Grade Champion, famously billed as the world's most accurate BB gun. It feels essentially like a highly enhanced Daisy Red Ryder on steroids.

Initial Thoughts & Basic Specs:

• Premium Build: This is a full-sized rifle featuring a beautiful, fully wooden stock and forend. It is noticeably longer and more robust than a standard Red Ryder.

• Action: The metal lever produces a heavy, satisfying clunk when cocked during a dry fire.

• Competition Sights: Built for precision, it utilizes a front peep sight and a very small rear peep sight.

• Extras: A heavy-duty shooting sling is included in the box.

• Target Audience: While it is a fantastic platform for younger shooters, its larger size and premium quality make it highly suitable for older youths and adults.

I am incredibly excited to put both of these lever actions to the test. I will be producing full tabletop and field test shooting videos for both rifles very soon, so stay tuned.

View fullsize

A lot of folks look at Replica Airguns and write them off as just toys or backyard plinkers. Spoiler alert: they are far from toys. In fact, Replica Airguns are some of the most practical, cost-effective, and accessible firearm training tools available on the market today. Whether you're running a full-blowback 4.5 mm steel BB pistol, a gas blowback Airsoft sidearm, or even a 43 caliber rubber ball trainer, these platforms offer real-world training benefits that transfer directly to live firearms.

Below, we break down how Replica Airguns stack up against real steel across the core fundamentals of shooting.

1. Holster Draw & Presentation

• The Comparison: High-end replica pistols feature 1:1 scale dimensions and realistic weight compared to their firearm counterparts. They fit into standard duty, concealed carry, and competition holsters with zero fuss.

• The Training Advantage: Practicing draw stroke and presentation from a holster requires massive repetition to build muscle memory. Replica Airguns give you that identical feel, but with a massive safety buffer. If you suffer an accidental discharge during a high-speed draw-and-fire drill, an Airsoft BB or steel BB might leave a bruise or require a minor patch-up, but it won't cost you a limb or your life.

2. Trigger Control & Grip Technique

• Trigger Feel: Full-blowback Replica Pistols replicate single-action/double-action trigger weights, pulls, and resets very closely to real steel guns. (Keep in mind that non-blowback or partial-blowback models often have heavier, double-action-only trigger pulls due to internal indexing).

• The Grip Technique: Building a solid modern shooting grip transfers 100% to Airguns.

  • Your strong hand pushes forward slightly into the backstrap with relaxed finger tension so you don't jerk the trigger.

  • Your support hand clamps down hard like a vise, pulling backward to lock the pistol into place.

• Practicing this push-pull clamping technique on an Airgun builds clean muscle memory without introducing flinching.

View fullsize

3. Recoil Management & Sight Transition

• Where Airguns Differ: While full-blowback Airguns provide a snappy mechanical cycling sensation, they don’t generate the sharp muzzle rise and concussive kick of a live 9mm or .45 ACP round. An Airgun slide tends to cycle and dip forward quickly, whereas a real gun snaps violently upward.

• The Takeaway: You won't get identical recoil impulse, but your eyes and hands still have to track the sights as the slide moves. It teaches rapid target acquisition, sight alignment, and consistent presentation between shots at a fraction of the physical fatigue.

4. Reloads & Malfunction Drills

• Clearing Drills: You can practice tap-rack-bang, speed reloads, and slide manipulations just like on the range.

• Important Safety Tip: If you are practicing slide-racking drills with an airgun, do it dry without BBs loaded in the magazine. Unlike live firearms (which eject the unfired cartridge when racked), cycling an Airgun slide repeatedly will often chamber multiple BBs into the breech.

• Practicing stoppages and magazine drops with Airguns lets you run fast drills at home without the hazards of live ammo.

5. Cost & Durability

• Operating Cost: Real ammunition adds up fast, a single box of 50 rounds of 9mm often runs $30 to $50. With an Airgun, that same round count in CO2 and BBs costs literally a couple of dollars. You can shoot 10 to 20 times more rounds on an Airgun budget.

• Build Quality: Real firearms are built from hardened steels and durable polymers meant to withstand thousands of high-pressure explosions. Replica Airguns are engineered for lower internal pressures, often utilizing aluminum alloys and cast metals. While they last for thousands of rounds, dropping an Airgun on concrete can damage components more easily than a live firearm. Treat them with care!

View fullsize

6. Training Environment & Accessibility

• No Range Trip Required: Live firearms require dedicated range time, travel, fees, and strict transport regulations (especially here in Canada with transport permits and licensing).

• Backyard & Basement Friendly: With an appropriate trap and backstop, Airsoft and rubber-ball guns are perfect for indoor garage or basement practice, while steel BBs excel in safe outdoor home setups. You can get quality reps in during 15 minutes of free time after dinner without ever packing up a range bag.

The Verdict

Are replica airguns a complete 100 %$ replacement for live-fire training? No, you still need live range time to master heavy recoil management and acoustic discipline.

However, for mastering the holster draw, establishing sight alignment, refining trigger pulls, and building consistent grip mechanics, Replica Airguns are second to none. They make high-frequency shooting training safe, cheap, and convenient.

What's Next?

Stay tuned next week, we have a mystery box unboxing arriving at the table with some brand-new product or products lined up for comprehensive reviews!

• Make sure to subscribe to the channel on YouTube, Vimeo, and Rumble.

• Follow our community updates on Instagram, Facebook, and Twitter.

• Ready to gear up? Visit ReplicaAirguns.ca (Canada) or ReplicaAirguns.us (USA) for pistols, rifles, CO2$ and training accessories.

View fullsize

While waiting for new guns to arrive for field and tabletop testing, it is the perfect time for an educational breakdown of blowback versus non-blowback Replica Airguns. When choosing between these styles, the core decision comes down to a trade-off: do you want the ultimate realism, or do you want maximum power and gas efficiency?

View fullsize

Full Blowback: The Ultimate Training Tool

Full blowback airguns are designed for the shooter who wants a true trainer with the most realistic functionality and breakdown.

• The slide cycles completely back with every single shot to provide simulated recoil.

• These models generally feature a true single-action trigger, which gives the shooter a lighter and shorter trigger pull.

• When the magazine is out of ammunition and the follower reaches the top, the slide will lock back just like a real firearm.

• They typically use full-size drop-out metal magazines that hold both the BBs or Airsoft BB’s and the CO2 cartridge.

• The main downside is that they require a massive amount of CO2 to simultaneously propel the ammunition and aggressively cycle the slide.

• This high gas usage causes the gun to cool down much quicker, which noticeably lowers the velocity of your shots.

• If the gun gets too cold during rapid fire, the CO2 valve can become sluggish and even lock open.

View fullsize

Non-Blowback: Power and Efficiency

Non-blowback airguns are built for the shooter who wants the most power and the highest number of shots to break targets downrange.

• The slide remains completely fixed in place and does not cycle when the gun is fired.

• Because there is no slide to cock the internal hammer, they rely on a true double-action trigger, resulting in a heavier and longer pull.

• While some models have full-size drop-out magazines, it is very common for non-blowback guns to use thinner stick magazines.

• They are significantly more efficient because all the CO2 is dedicated solely to firing the ammunition out of the barrel.

• The lack of blowback action means the gun does not cool down nearly as fast.

• They deliver higher overall shot velocities and can operate much more reliably in slightly colder temperatures.

View fullsize

Partial Blowback: The Middle Ground

For those who cannot decide between the two extremes, partial blowback models offer a compromise between realism and efficiency.

• The slide still cycles to provide simulated recoil, but it only travels part of the way back.

• The trigger feel sits somewhere between a true double-action and a single-action pull.

• They consume less gas than a full blowback model, but they still use more than a non-blowback model.

• They usually come equipped with full-size drop-out metal magazines.

• Many newer partial blowbacks feature a system where pulling the trigger pushes the BB directly into the barrel to create a tight seal, resulting in excellent CO2 efficiency and higher velocities than a full blowback Airgun.

Whether you are looking for Airguns, Airsoft rifles, Pellet guns, Blank guns, or Accessories, Canadians can shop at replicaairguns.ca and US customers can shop at replicaairguns.us. You can also explore thousands of past video reviews and connect on Facebook, Twitter, Instagram, Rumble, YouTube, and Vimeo.

View fullsize

Today I am testing out the Crosman 2240XL Special Edition here in the Sea Can indoor shooting range. It is getting a bit colder and raining outside, but the Sea Can is sitting at a comfortable 19 to 22 degrees Celsius, providing a great baseline environment for testing a fresh CO2 cartridge. If you haven't already, be sure to check out the dedicated Table Top Review for all the specifications and build details on this model. For this field test, our focus is entirely on performance: running it through the chronograph for real-world velocity and testing the downrange accuracy.

Chronograph & Velocity Performance For the velocity baseline, I used a brand new CO2 cartridge and loaded up some heavier .22 caliber Crosman Premier Hollow Points, which sit around the 14 to 15-grain mark. Crosman claims around 460 FPS on the box, but keep in mind that is typically achieved using the lightest possible ammunition.

Here is how the 5-shot string performed through the chronograph:

• Shot 1: 329 FPS

• Shot 2: 330 FPS

• Shot 3: 337 FPS

• Shot 4: 335 FPS

• Shot 5: 335 FPS

View fullsize

The Crosman 2240XL Special Edition settled in nicely around a 333 FPS average. Because this is a bolt-action setup rather than a fast-firing semi-auto, the CO2 doesn't cool down too rapidly between shots, which helps keep the velocity remarkably consistent across the string.

Downrange Accuracy & Target Testing Moving over to the accuracy test, I set up a fresh paper target 30 feet downrange. For this setup, I decided to mount a bit of a monstrosity of a 4x optical magnification scope using the dovetail mounts, which I pulled right off another gun just for this test.

I took about 9 shots from a rested position on the table. The first two shots were close together, but the grouping eventually opened up to about 2 inches, including one major flyer that I definitely didn't feel like I pulled. Honestly, I wasn't super impressed with this particular grouping. The 2240 platform is famous for its accuracy, so this spread might be down to a few different factors: potential nicks on the pellets during loading, the cheap optical sight I attached, or just user error while trying to stabilize it.

View fullsize

Handling Notes & Optics Fitment One of the absolute highlights of the Crosman 2240XL Special Edition is the trigger. It has a very nice, light, and short pull with essentially zero break required. However, shooting a pistol with a magnified scope from a rested position proved to be awkward. Trying to pull a pistol-length platform close to your face for proper eye relief (using a rifle scope rather than a pistol scope) can make everything feel quite shaky.

If you plan on running a larger optic like this, I highly recommend adding a shoulder stock to help stabilize the gun. Alternatively, swapping the massive scope out for a compact red dot or sticking to standard pistol sights would make this much more comfortable to shoot in its stock pistol form.

Final Thoughts The Crosman 2240XL remains an incredibly highly modifiable platform, fitting right in with the various pumper and .177 caliber variants available on the market. While my grouping today wasn't the tightest, the potential of this gun is massive once you dial in the right optics, ammo, and perhaps a stock for better stability.

Where to Buy

• 🇨🇦 Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• 🇺🇸 Buy Pellet Pistols in the US

View fullsize

Welcome back to Replica Airguns. I get asked all the time about which airguns hit the hardest, but a lot of people focus on the wrong attributes. They often look strictly at velocity instead of the raw energy and blunt force required for different tasks.

In this guide, we are breaking down the four main types of airgun ammunition: Airsoft, steel BBs, lead pellets, and rubber balls. The goal is to show you exactly what each ammo type excels at and where they fall short so you can choose the right tool for your specific needs.

View fullsize

6mm Airsoft: Safe Training and Plinking

Airsoft guns fire 6mm round balls, which are generally made of plastic, though you can find copper or zinc-coated variants. Because these are some of the lightest projectiles, ranging from 0.20 to 0.45 grams, they have the lowest overall energy and often lower velocities.

• Best For: Airsoft is ideal for force-on-force skirmishes (with proper eye protection) because the lightweight rounds sting but do not penetrate the skin.

• Practical Uses: They are great for safe indoor garage shooting without the risk of breaking windows, or for humanely chasing nuisance crows or vermin out of your yard without causing them permanent harm.

• Platform Tech: Heavier airsoft rounds utilize backspin, or "hop-up", to float straight through the air for better accuracy, and they are typically fired from highly realistic, full-blowback gas or CO2 replica pistols. Most rifle Airsoft guns are AEG’s using a battery and spring setup which allows for easy semi and full auto operation.

• Worst For: These are entirely ineffective for pest control (extermination) or any scenario requiring deep penetration or high impact energy.

View fullsize

4.5mm Steel BBs: Fast-Action Shooting

Steel BBs are 4.5mm in diameter, which translates to a .177 caliber round ball. Weighing in at approximately 5.3 grains, they are much denser than Airsoft rounds.

• Best For: Steel BBs are fantastic for fast-action plinking, breaking glass bottles, and tearing up pop cans.

• Platform Features: These are often used in 1-to-1 replica blowback pistols with drop-out full size magazines, giving shooters an authentic firearm feel for tactical manipulation practice.

• The Dangers: Steel does not deform upon impact, meaning these BBs are highly prone to dangerous ricochets if you shoot at hard surfaces indoors or up close.

• Worst For: Steel BBs lack the blunt force for home defense and are unethical for pest control as trey are a bit under powered and generally not as accurate as similar pellet guns.

View fullsize

Lead Pellets (.177 and .22 Caliber): Precision and Pests

Unlike round BBs, pellets are designed to be fired through a rifled barrel. Common sizes include .177 caliber (4.5mm, weighing 5 to 10 grains) and the much heavier .22 caliber (5.5mm, weighing 12 to 16 grains).

• Best For: The soft lead engages the spiral grooves in a rifled barrel, providing unmatched precision and accuracy.

• Terminal Ballistics: Because lead is soft, it expands and flattens upon impact, transferring its heavy kinetic energy directly into the target.

• Practical Uses: This improved energy transfer makes pellets the ethical choice for small pest control.

• Worst For: Pellet platforms are rarely designed as rapid-fire action shooters; they typically utilize slower single-shot (bolt actions) or rotary magazines that can require a bit of trigger finger strength to shoot quickly.

View fullsize

Rubber Balls (.43, .50, and .68 Caliber): Less-Lethal Blunt Force

This category represents the heavy hitters, firing massive projectiles that range from soft sponge rubber to dense steel-core balls, dust balls, and pepper balls.

• The Power Factor: A .68 caliber home defense marker can produce upwards of 20-50 Joules (or roughly 15-35 foot-pounds) of energy with dedicated home defense styled Rubber Ball Guns.

• Best For: The .68 caliber and high-powered .50 caliber options are explicitly designed for less-lethal home defense.

• How They Work: Instead of penetrating, these massive projectiles dump incredible raw energy and blunt force directly onto the target, effectively stopping threats through extreme pain.

• Training Options: The smaller .43 caliber variants are frequently chambered in realistic blowback replica pistols, making them excellent for tactical and paintball-style force-on-force training.

At the end of the day, picking the right Airgun comes down to matching the ammunition mass and energy to your target. You can find all the gear discussed here, from Airsoft replicas to less-lethal launchers, at the Replica Airguns Canada and US stores. Make sure you are subscribed to our channels across Rumble, YouTube, Vimeo, Instagram, X and Facebook for more detailed reviews and field tests.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

In this table top review, we are taking a close look at the Crosman 2240XL Special Edition, a .22 Caliber CO2 Pellet Pistol. While I haven't shot this exact model yet, I have shot the standard 2240 non-XL version, and they share a very similar firing mechanism. The biggest draw to the XL version is the factory-upgraded metal breech with an 11mm dovetail rail, and the threaded muzzle for added versatility.

View fullsize

Key Specifications:

• Model: Crosman 2240XL Special Edition

• Type: Pellet Pistol

• Caliber: .22 caliber lead pellets

• Power Source: 12-gram CO2 (1 cartridge)

• Velocity: Up to 460 FPS

• Action: Single-Shot Bolt Action

• Safety: Cross-Bolt Safety

• Barrel: Rifled Steel Barrel, Threaded muzzle (1/2" x 20 threads)

• Stock/Grips: Plastic grips

• Construction: Mostly metal (steel breech, barrel, loading chamber) with plastic grips

• Weight: 1.8 lbs

• Overall Length: 12.5 inches

• Sights: None included

• Optics Rail: 11mm Dovetail Rail

View fullsize

First Impressions & Build Quality:
The 2240XL brings a much-needed factory upgrade to the legendary 2240 platform: a full steel breech. This alone is a huge addition, making the gun stand out and providing a much higher quality feel. The gun is almost entirely metal, including the barrel, CO2 loading chamber, bolt, and breech. The grips are plastic, which is fairly standard, but one of the best things about the Crosman 2240 platform is how highly customizable it is. There are countless aftermarket parts available, and you can even easily swap out the grips fro wood grips or for a Crosman shoulder stock to turn it into a backpacker-style carbine.

Weighing in at 1.8 pounds and measuring 12.5 inches long, The Crosman 2240XL Special Edition has a solid feel in the hand. The threaded barrel comes with a thread protector and gives you options for adding mock suppressors or other attachments.

View fullsize

How It Works:
This is a single-action, bolt-action pellet pistol. To operate it, you must first cock the bolt and manually load a .22 caliber pellet into the chamber. Once the bolt is pushed forward and locked down, the trigger is engaged and ready to fire. Powered by a single 12-gram CO2 cartridge housed in the lower tube, it is capable of firing up to 460 FPS depending on the weight of the pellets used. Because it's a single-shot bolt action, you'll need to manually load a pellet for every shot, but you won't need to pump it since the CO2 provides the power.

View fullsize

Pros:

• Upgraded steel breech from the factory provides a robust build and premium look.

• Built-in 11mm dovetail rail makes adding a red dot or magnified optic easy.

• Threaded muzzle (1/2" x 20 threads) with an included thread protector for attachments.

• Solid CO2 power at up to 460 FPS.

• Highly customizable platform with endless aftermarket parts available.

• Excellent light single-action trigger with very little take-up.

• Mostly metal construction ensures long-lasting durability.

View fullsize

Cons:

• Does not come with any open sights, an optic is required out of the box.

• Relies on CO2, meaning velocities will fluctuate as the gun cools down during rapid fire and potentially as CO2 volume lowers.

• Standard plastic grips are somewhat basic.

View fullsize

Final Thoughts:
The Crosman 2240XL Special Edition takes an already proven pistol and adds the features most shooters end up buying aftermarket anyway. Having the steel breech and dovetail rail right out of the box makes mounting an optic straightforward, and the threaded muzzle is a fantastic touch, even if it’s just mainly for looks. If you're looking for a powerful .22 caliber airgun for small pest control that can be modified to your exact liking, the 2240XL is a superb starting point.

Stay tuned for the Field Test Shooting video coming up down the road.

Available at:

• 🇨🇦 Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• 🇺🇸 Buy Pellet Pistols in the US

We are halfway through September, and another unannounced delivery just showed up at the door. This box was surprisingly compact but incredibly dense, hinting at a hefty amount of possible ammunition inside. Cracking it open revealed a massive 4,000-count bottle of BBs and an updated classic from Crosman.

Gear Stock 4.5mm Copper-Coated Steel BBs

The sheer weight of this package came from a bulk 4,000-round bottle of Gear Stock 4.5mm steel BBs. These specific rounds feature a copper coating, which looks great but comes with a few historical caveats.

• Copper vs. Zinc: In my experience, copper-coated BBs can tarnish over time. Unlike zinc, which stays relatively clean, older copper coatings can oxidize and leave a dark, powdery residue on your hands and inside your airgun's barrel.

• Quality Check: If you burn through your ammo quickly, the tarnishing won't be an issue. We will have to see if modern manufacturing has improved the coating durability on this Gear Stock batch, but I typically lean toward zinc-coated BBs for long-term storage and cleaner shooting.

• Buy Gera Stock BB’s in Canada

• Buy Gear Stock BB’s in the US

View fullsize

The Crosman 2240 XL .22 Caliber CO2 Pellet Pistol

The main event in this box is the Crosman 2240 XL. The 2240 platform has been a staple in the airgun community for decades, and the XL version finally addresses the most common pain points shooters had with the base model out of the box.

• Core Specs: The 2240 XL is a CO2-powered, bolt-action, single-shot pistol chambered in .22 caliber. It weighs in at 1.8 pounds, features a rifled steel barrel, and utilizes a standard 12-gram CO2 cartridge.

• The Metal Breech Upgrade: The standard 2240 and its multi-pump cousin, the 1322, utilize a plastic breech. Mounting an optic on those older models requires clamp-on barrel adapter rings, which can easily twist out of alignment. The 2240 XL ships with an upgraded all-metal breech featuring a milled 11mm dovetail rail, allowing for a rock-solid red dot or scope mount straight from the factory.

• Threaded Muzzle: The front of the barrel has a threaded muzzle cap. You can unscrew the tip to attach 1/2" UNF aftermarket compensators or moderators, adding another layer of customization.

• Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• Buy Pellet Pistols in the US

View fullsize

Customization and Practical Application

Because the 2240 XL features a dovetail rail instead of iron sights, it is built specifically for optics. This plays perfectly into the massive aftermarket support for Crosman’s 22xx and 13xx platforms.

I own a heavily modified "backpacker" setup on one of my personal Crosman .22s, featuring a skeletonized rear shoulder stock and a magnified scope. At sub-500 FPS, a .22 caliber pellet is highly effective for close-range pest control. When dealing with nuisance animals like crows attacking songbirds, an ultra-high-velocity pellet will often pass straight through the target, wasting its kinetic energy. A heavier .22 pellet moving at moderate speeds dumps its full energy upon impact, providing a much more immediate and humane dispatch.

The full tabletop and field test shooting videos for the Crosman 2240 XL are coming up next. Make sure you are subscribed on Rumble, Vimeo, X, Threads, or TikTok to catch the full performance breakdown when it goes live.

View fullsize

Today, we are checking out the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. This is an all-around sharp replica featuring full blowback action and a full-size drop-out magazine that holds both the CO2 cartridge and 6mm Airsoft BBs.

For this field test, we are strictly focused on seeing how it performs on the range. I am using fresh CO2 with .25 gram Airsoft BBs, a little heavier than standard .20g BBs, but they generally provide better consistency and flight stability downrange (keep in mind that .20g BBs are what guns are typically tested with for Canadian import velocity ratings, so you would see higher FPS with lighter ammo).

Make sure to check out my Table Top Review for the ASG CZ P-10C for detailed specifications, close-up footage, and a full walk-around.

Chronograph and Velocity Testing

To kick things off, I loaded up a fresh CO2 cartridge and fired a 5-round string through the chronograph. Right before starting, I realized I hadn't installed the rear sight plate yet, but for shooting straight through the chrony, it wasn't an issue!

Here is how the ASG CZ P-10C performed with .25g BBs:

• Shot 1: 305 FPS

• Shot 2: 303 FPS

• Shot 3: 301 FPS

• Shot 4: 298 FPS

• Shot 5: ~300 FPS

That gives us a very consistent 298 to 305 FPS range, with an average of around 301 FPS. You immediately feel the snap and kick from the blowback, it really feels responsive and cycles fast.

Accuracy Downrange at 30 Feet

Next, I set up a fresh paper target at my standard 30-foot mark. Before shooting the accuracy string, I quickly installed the included rear sight, which only takes a minute using a single screw and an Allen key.

I put a 10-round string downrange with the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. Sighting in, I aimed right underneath the bullseye so I could keep a clear sight picture on the target:

• Grouping: Out of the box, the pistol delivered an impressive grouping of roughly 2.5 inches (definitely closer to 2.5 inches than 3 inches).

• Placement: The group landed just slightly low and biased slightly to the left. Pulling a touch to the left can be common with out-of-the-box pistols or simply natural shooter tendency, but the spread itself was tight and consistent. Aiming dead-center or fine-tuning the hop-up for 30 feet easily brings those rounds right onto the bullseye.

View fullsize

Shooting Feel and Performance

Shooting the ASG CZ P-10C feels great in the hand:

• Trigger: The single-action trigger is crisp, predictable, and has a very clean break.

• Blowback Action: The slide cycling is snappy, fast, and delivers a very noticeable kick. It gives you that positive, tactile feedback you want from a quality blowback replica.

• Feed & Cycling: When chambering the very first round on a completely full magazine, the slide spring met a little extra tension from the fully packed BB follower, requiring a slight assist to close fully. However, as soon as firing began and the tension smoothed out, the pistol cycled and performed flawlessly through the entire string without a single hiccup.

Final Thoughts

Overall, I am really impressed with the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. It looks great, shoots with rock-solid consistency right around the 300 FPS mark with .25g ammo, and produces a tight 2.5-inch grouping at 30 feet right out of the box. Between the snappy blowback recoil, crisp trigger, and reliable feeding, it makes an awesome choice whether you're looking for an authentic training sidearm or a competitive airsoft pistol.

Where to Buy

• Buy the ASG CZ P-10C CO2 Blowback Airsoft Pistol in Canada

• Buy ASG Airguns in the US

Thanks for watching and reading! Don’t forget to subscribe and follow our updates on Rumble, Vimeo, YouTube, Facebook, and Instagram.

View fullsize

Hey everyone, Michael here with another field test video! Today, we are putting the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol through its paces in the indoor shooting range. If you're looking for the nitty-gritty details, specifications, and close-up angles, be sure to check out my dedicated Table Top video. For this session, we are strictly focused on performance: seeing how this realistic blowback replica handles when we actually put some rounds downrange. While this specific model does include the MOS plates for mounting a red dot, I decided to stick with the standard white-dot open iron sights for today's target testing.

Chronograph and Velocity Testing

Starting things off with the chrony test, I popped in a brand new CO2 cartridge to see what kind of speed we could get out of this Glock. Generally, with a heavy, fast-cycling blowback system like this one, I expect velocities to hover right around the 300 FPS mark. Let's see how the Gen 5 performed:

• Shot 1: 296 FPS

• Shot 2: 260 FPS

• Shot 3: 256 FPS

• Shot 4: 285 FPS

• Shot 5: 257 FPS

• Shot 6: 283 FPS

As you can see, the numbers jumped around a fair bit, and we stayed just shy of that 300 FPS threshold. This isn't super surprising, when you have a really stiff, snappy slide spring eating up that CO2 to cycle the blowback action, you're usually trading off a little bit of velocity and consistency to get that realistic recoil feel.

View fullsize

Accuracy Downrange at 30 Feet

Next up, I stepped back to my standard 30-foot mark to see what kind of grouping the Glock 17 could pull off on a fresh paper target. I did actually loaded 10 BBs for this string, which means the slide did lock back on the final shot since the magazine wasn't fully topped up to capacity.

Shooting the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol is an absolute blast. The trigger is fantastic, it has a failry light, short pull that perfectly replicates that classic Glock single-action feel. By holding my aim dead center, or maybe just a hair under the bullseye, the end result was a just over 2 inch grouping fairly well centered left to right, but a bit low on the bullseye. It's definitely more than accurate enough for practical, fast-paced action shooting.

Shooting Feel and MOS Features

The physical shooting experience is really where this Umarex replica shines. The slide action is incredibly crisp and fast, giving you a surprisingly snappy kick that feels highly authentic in the hand.

One huge bonus for this Gen 5 model is the Modular Optic System (MOS) design. Even though I rolled with the iron sights today, you have all the included plates needed to drop a micro red dot on top if that's your preference. Combining that optics readiness with a trigger that lets you rip off quick follow-up shots without pulling your muzzle off-target makes this an absolute joy to shoot.

View fullsize

Final Thoughts

Ultimately, the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol is a top-tier training option. If you own the real steel 9mm version, this 1:1 BB replica is a no-brainer for running speed reloads, practicing your draw, and doing target transitions in the comfort of your own garage or backyard. You're saving a ton of money on ammo while getting some highly effective muscle memory practice. It might not win any awards for sheer FPS or sniper-level target accuracy, but as a realistic action plinker and trainer, it absolutely hits the mark.

Where to Buy

• Buy the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol in Canada

• Buy Glock Air Pistols in the US

Thanks for tuning in! Make sure to head over and follow the Replica Airguns channels on Rumble and Vimeo. We are uploading as much content as possible to Rumble right now, and your support means the world as we keep building up our video community!

View fullsize

First Look & Overview In this table top review, we are taking a look at the Umarex Glock 17 Gen 5 MOS Full Blowback CO2 4.5mm BB Pistol. We will be focusing purely on the table-top aspects for this video, so there is no active shooting featured here; a dedicated field test shooting video will be coming down the road. As a fully licensed replica from Umarex, it offers all the authentic Gen 5 styling and markings you would expect. Today, we are specifically looking at the full blowback version, which prioritizes a true-to-life shooting experience and heavy recoil simulation over pure power and efficiency.

Specifications

• Caliber: 4.5mm steel BBs

• Action: Single action, full blowback

• Magazine: 17-round drop-out magazine

• Power Source: 12-gram CO2

• FPS: Maximum 300 FPS

• Weight: 1.5 lbs (680 grams)

• Length: 7.95 inches (20.2 cm)

• Barrel: 4-inch (10 cm) smooth bore

View fullsize

Build Quality & Design The Umarex Glock 17 Gen 5 MOS features an incredibly realistic design, boasting a heavy metal slide paired with a durable polymer frame. It completely matches the heft of its real steel counterpart, weighing in at a solid 1.5 pounds, and feels very comfortable in the hand. The slide comes with the signature Gen 5 front serrations and cycle.s completely back during operation, opening the ejection port fully to reveal the wide open magwell

Magazine & Loading System Loading the Umarex Glock 17 Gen 5 MOS BB Pistol is straightforward. It utilizes a heavy, full-size drop-out magazine that holds 17 rounds of 4.5mm steel BBs. The magazine follower can be pulled down and easily locked in place with a quick flick, making loading incredibly fast. Unlike partial blowback models where the magazine pulls forward to seal the breech, this model utilizes a traditional Airsoft-style follower-fed system where the slide simply strips the BB and loads it directly into the breech. While this design is less CO2 efficient and results in slightly less power, it is essential for delivering that complete, highly realistic full blowback action.

Handling & Controls True to the Glock platform, the handling on this replica is extremely authentic. It incorporates an ambidextrous slide catch release that smoothly locks the heavy slide rearward when the magazine runs empty. The single-action trigger pull is relatively light and short. In terms of safeties, it has the classic built-in trigger safety, but Umarex has also integrated an additional cross-bolt safety directly onto the trigger. While it functions well, it can be slightly awkward to push flush and disengage with your finger when you are preparing to shoot.

View fullsize

Sights & Optics This specific MOS (Modular Optic System) version truly shines when it comes to aiming options. Out of the box, it comes equipped with the standard fixed white-dot front and rear sights for easy target acquisition. However, the package also includes an Allen key and four different adapter plates, allowing you to seamlessly mount a variety of micro red dot sights directly to the slide. If you want to add more accessories, the built-in lower rail easily accommodates tactical lights or lasers.

Performance Expectations The Umarex Glock 17 Gen 5 MOS Full Blowback CO2 4.5mm BB Pistol operates with a heavy focus on realism. Because the heavy metal slide travels all the way back with every shot, you get a very satisfying simulated recoil. However, this heavy action demands a significant amount of CO2. As a result, you can expect a slightly lower velocity, coming in at around 300 FPS, and fewer overall shots per CO2 cartridge compared to partial blowback models.

View fullsize

Pros

• Realistic Replica in looks, weight, and full blowback function.

• Good weight and feel to it, build quality seems excellent as with all the Umarex Licensed Glocks.

• Really nice looking and full featured replica of the original Glock 17 Gen 5 MOS.

• Fully Glock licensed via Umarex.

• Easy to see white dot sights front and back.

• Recessed barrel for added realism.

• Accessory rail under barrel for adding a laser or tactical light.

• Full slide travel blowback action provides a true, hard-recoil shooting experience.

• Can be field stripped just like the real steel version.

• Cross Bolt Safety built into the trigger.

• Full size drop out metal magazine that holds the CO2 and 4.5mm steel BBs.

• Slide spring is super snappy and firm, giving an exceptionally crisp and authentic recoil effect.

• Warning instructions are nice and discreet under trigger guard.

• Lighter, true single-action trigger pull as the full blowback slide cocks the internal striker on every cycle.

Cons

• Full blowback action decreases CO2 efficiency, resulting in fewer shots per cartridge.

• Slightly lower velocity (300 FPS) due to the heavy slide action.

• No adjustable sights out of the box without mounting a red dot.

View fullsize

Final Thoughts The Umarex Glock 17 Gen 5 MOS is a fantastic option for anyone who values maximum realism and training utility over raw FPS. While you do trade some CO2 efficiency for the heavy slide travel, the simulated recoil and authentic handling make it an incredibly enjoyable Airgun to shoot. The inclusion of the MOS plates is a massive bonus for modern shooters wanting to run optics. Stay tuned for the upcoming shooting video to see exactly how this performs down range.

• Buy the Umarex Glock 17 Gen 5 MOS CO2 Full Blowback 4.5mm BB Pistol in Canada

• Buy Glock Airguns in the US

We’ve got yet another box on the table today for our August Mystery Unboxing. It took a while to arrive, but it was absolutely worth the wait. We’re diving into four highly anticipated products across the BB, Pellet, and Airsoft categories.

Here is a quick first look at what’s hitting the review table soon!

View fullsize

Marksman Model 1018 .177 Caliber Air Pistol

First out of the box is the Marksman 1018. This is a very budget-friendly (around $50), 1911-inspired spring-actuated pistol. It features fiber-optic sights on the front and back, making it an excellent, quiet option for basement or backyard plinking. While it can technically shoot darts and bolts, we'll be sticking to BBs and pellets for our tests.

Basic Specifications:

• Action: Single-stroke spring piston

• Caliber: .177 Caliber (BBs and Pellets)

• Capacity: 18-shot internal BB reservoir

• Velocity: Up to 200 FPS

• Weight & Length: 1 lb / 9.0 inches

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

Next up is a beauty from Umarex, the Glock 17 Gen 5 MOS. If you love ultra-realistic replicas, this is it. It features a heavy full-metal slide spring, a recessed barrel, and classic white dot sights. The "MOS" means it comes ready with all the mounting plates you need to attach your favorite red dot sights. It runs on a full-size, drop-out 17-round metal magazine and utilizes a full blowback system for ultra realistic blowback operation.

Basic Specifications:

• Action: Semi-auto full blowback, single CO2 cartridge

• Caliber: 4.5mm (.177) steel BBs

• Capacity: 17-round drop-out metal magazine

• Velocity: Approximately 300 FPS

• Weight & Length: 1.5 lbs / 7.95 inches

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

I'm incredibly excited to finally do a proper field test on this one. This is a replacement for a previous model that had a leaky loading valve. This gas-operated, "Mares Leg" style lever-action rifle is heavily modernized. It features a gorgeous real wood stock, an enlarged lever loop, a Picatinny top rail, an M-LOK handguard for accessories, and a mock suppressor on the front.

Basic Specifications:

• Action: Gas Non-Blowback Lever Action (Green Gas)

• Caliber: 6mm Airsoft BBs

• Capacity: 25-round internal magazine

• Velocity: 360 - 390 FPS (with 0.20g BBs)

• Weight & Length: 3.7 lbs / 24.5 inches

View fullsize

Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle

Finally, we have an absolute powerhouse in a tiny package: the Specna Arms SA-E10 PDW. This is a super-compact AR-style AEG with a polymer-metal build and a telescopic stock. Specna Arms goes above and beyond with the box contents on this one. Along with the rifle, you get two S-MAG mid-cap magazines, an additional M90 drop-in spring to easily lower your FPS for indoor fields, a Deans adapter, and a vertical foregrip.

Basic Specifications:

• Action: Electric (AEG) with Pre-installed MOSFET

• Capacity: Includes two 125-round mid-cap S-MAG magazines

• Velocity: 375-390 FPS (Drops to ~310-320 FPS with included M90 spring)

• Length: Minimum 505 mm (approx. 19.8 inches)

• Inner Barrel: 160 mm precision 6.03mm barrel

Stay tuned to the Replica Airguns channel, as I'll be doing dedicated tabletop and field test shooting videos for all of these very soon.

View fullsize

In this Table Top Review, we're taking a detailed look at the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. As always, this is a Table Top Review only, so there won't be any shooting in this video. However, a dedicated Field Test Shooting Video will be coming later to see how it performs in real-world use.

This is an ASG product, officially licensed by CZ, and it features authentic markings, including the 9x19 stamp. It's a modern, full-blowback airsoft replica that mirrors the real steel CZ P-10 C very closely. Manufactured in Taiwan and distributed by ASG, this model stands out with some excellent out-of-the-box features, making it a highly versatile and realistic option for airsoft shooters.

View fullsize

Specifications

• Caliber: 6mm Airsoft BB.

• Action: Semi-auto, full blowback.

• Power Source: Single 12g CO2 cartridge (Green Gas magazines are also available).

• Magazine Capacity: 22-round full metal drop-out magazine.

• Velocity: ~330 FPS (1.05 Joules) with .20g BBs.

• Weight: 1.63 lbs (730 g).

• Overall Length: 7.09 inches (195 mm).

• Construction: Metal slide, nylon/polymer frame.

• Barrel: 14mm CCW threaded outer barrel.

• Hop-Up: Adjustable (accessible via open ejection port).

• Optics Ready: Yes (optics plate pre-installed).

View fullsize

Build Quality & Design

The ASG CZ P-10 C delivers a solid mix of materials with its metal slide and nylon frame construction. The metal slide gives it a realistic, top-heavy weight and feel, while the nylon frame keeps the overall weight balanced at a manageable 1.63 pounds. The full metal 22-round magazine, which houses the 12g CO2 cartridge, adds substantial weight to the grip, giving the gun a very realistic presence in the hand.

Field stripping is incredibly simple and authentic to the real steel version—just pull down the two tabs and rack the slide forward to remove it. While the most of the frame components are mostly plastic, the heavy metal slide ensures durability where it counts.

View fullsize

Handling & Controls

This pistol is designed with ergonomics and modern handling in mind. It features mostly ambidextrous controls, including an ambidextrous slide catch and release. While the magazine release comes set up for right-handed shooters, it is completely reversible. The pistol includes a working trigger safety and comes with three interchangeable backstraps, allowing you to customize the grip size to perfectly fit your hand.

One of the standout design choices on this airgun is the hop-up adjustment. Instead of having to field strip the pistol to make adjustments, you can access the hop-up wheel directly through the open ejection port when the slide is locked back, a massive time-saver during gameplay.

View fullsize

Sights & Optics

Out of the box, the ASG CZ P-10 C is optics-ready and comes with an optics plate already installed on the slide. If you prefer to run standard iron sights, ASG includes a rear white-dot sight in the box that you can easily swap out by removing the plate. It also features a fixed white-dot front sight for quick target acquisition.

Additionally, the gun features a 14mm CCW threaded outer barrel right out of the box, hidden under a protective orange cap. This makes it instantly ready to accept a mock suppressor or a tracer unit once the cap is removed.

View fullsize

Performance Expectations

With a claimed velocity of around 330 FPS (1.05 Joules) using a 12g CO2 cartridge, it hits perfectly within standard indoor CQB limits while still offering enough power for outdoor play. Because it features full blowback operation paired with a fairly heavy metal slide, you can expect a very crisp, realistic recoil effect with every shot.

View fullsize

Pros

• Officially licensed by CZ with authentic 9x19 markings.

• Full blowback operation with a heavy metal slide for realistic recoil.

• Optics-ready out of the box with the plate pre-installed.

• 14mm CCW threaded outer barrel ready for a suppressor or tracer unit.

• Convenient hop-up adjustment dial accessible through the open ejection port (no field stripping required).

• Includes three interchangeable backstraps to customize grip size.

• Ambidextrous slide release and reversible magazine release.

• Simple and realistic field stripping process.

• Comes in a Black and Tan version

Cons

• Comes with an orange cap on the barrel, though it serves to protect the 14mm threads and can be removed.

• The standard rear sight is not installed out of the box (requires swapping the pre-installed optics plate).

• Internal trigger group components are mostly plastic.

View fullsize

Final Thoughts

The ASG CZ P-10 C CO2 Blowback Airsoft Pistol is a fantastic option for anyone looking for a modern, feature-rich sidearm. It bridges the gap perfectly between a realistic training tool and a highly capable Airsoft primary or secondary. The inclusion of an installed optics plate, a threaded barrel, and a hop-up that doesn't require field stripping shows that ASG really thought about the end-user when designing this replica. I'm looking forward to getting this out for the field test to see how that heavy slide cycles and this Airsoft Pistol tests out on the Chrony and Paper Target.

• Buy the ASG CZ P-10C CO2 Blowback Airsoft Pistol in Canada

• Buy ASG Airguns in the US

View fullsize

They say that real awesome things come in small packages, and that is absolutely the case with my latest unboxing. I honestly wasn't sure what to expect when this tiny box arrived on my doorstep, but inside is a fantastic addition to the review lineup: the ASG CZ P10C Optic Ready 6mm Airsoft Pistol.

This is a fully crisp CO2 blowback pistol that feels amazing in the hand, packed with great features right out of the box.

Quick Specs & Features:

• Length: 195 mm

• Weight: 780 grams (just under a kilogram, giving it a solid, realistic weight)

• Magazine Capacity: 22 rounds (uses standard 12g CO2 capsules)

• Power: 1.05 Joules / ~330 FPS (100 m/s)

• Build: Metal slide with a polymer frame, complete with an orange tip that easily unscrews.

• Optics Ready: Features a rear slide cut-out ready to accept a red dot sight.

View fullsize

What’s Inside the Box?

Don't let the compact packaging fool you, ASG bundled everything you need to get configured. Along with the pistol and the CO2 magazine, you get a user manual, a discrete rear iron sight option (with white dots matching the front sight), and interchangeable backstraps (small, medium, and large) so you can customize the grip to your exact hand size. Pro tip: If you're looking for the Allen keys to swap the sights or load the CO2, make sure to lift up the cardboard packaging, they are buried safely underneath the box!

What’s Coming Next on the Channel

I am hard at work keeping fresh content rolling your way. Alongside a full tabletop review and upcoming field test for this CZ P10C, I am also working on a highly requested follow-up video for the .68 caliber less-lethal platform. I'll be re-doing the penetration test using a massive 88g CO2 tank to see if the increased capacity gives us a significant performance boost over the dual 12g setup that may have not been at full capacity for my first test..

Stay tuned for both of those videos dropping shortly!

• Buy the ASG CZ P10C Optic Ready 6mm Airsoft Pistol in Canada

• Buy the ASG 6mm Airsoft Pistols in the US

View fullsize

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol takes the already popular P320 platform and adds a more tactical, competition-inspired look with the Spectre Comp styling. In this Field Test Review, I focused mainly on real-world shooting performance including velocity, accuracy, trigger feel, blowback action, and overall handling. If you want all the detailed specifications and close-up overview footage, make sure to also check out my Table Top Review video for this model.

For this test I used standard Sig Sauer lead pellets, estimated around 7–8 grains rather than lightweight alloy pellets, giving a more realistic idea of what shooters can expect during normal use. Despite some chronograph frustrations during testing, the pistol delivered fairly consistent velocities once everything settled down. Average readings for my five shots through the Chronograph came in at 270 FPS, with highs reaching about 286 FPS during the initial shots and my slowest shot was 260 FPS. Considering the cooling effect common with CO2-powered airguns, the consistency was actually quite respectable for a blowback pellet pistol.

Accuracy testing was performed at 30 feet using a standard paper target. I fired a full 10-shot group and overall results were solid for a blowback pellet pistol with a higher-capacity belt-fed magazine system. Most shots grouped within roughly 2 inches, although the full spread opened up closer to 2.5–3 inches when including a couple lower shots likely caused by slight velocity variation from CO2 cooldown. Horizontal consistency was very good, with only a slight tendency to drift left. For a rapid-fire capable CO2 pistol with blowback, the accuracy was more than acceptable.

View fullsize

One thing worth mentioning is the trigger feelof the Sig Sauer Spectre Comp. Since the trigger system also advances the pellet belt during firing, there is naturally a bit more friction and a slightly longer pull compared to some rotary magazine designs. Even so, the trigger never felt excessively heavy or unpleasant. Rapid follow-up shots were still easy to manage, and the realistic blowback action adds a lot to the shooting experience.

The 20-round belt-fed magazine system is one of the biggest advantages of the Spectre Comp over many traditional rotary magazine pellet pistols. Instead of dealing with smaller 8-shot or flip-around style magazines, you get a much more enjoyable shooting session with fewer reload interruptions. Combined with the realistic weight, solid balance, and satisfying blowback recoil impulse, this pistol ends up being a very fun and practical option for target shooting and action-style plinking.

If you are looking for a realistic training-style pellet pistol that combines blowback action, higher magazine capacity, and solid handling characteristics, the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol is definitely worth checking out. It offers a nice balance between realism and shooting fun while still delivering respectable accuracy and consistency for casual target shooting.

You can find more information about Airguns, BB guns, Pellet guns, Airsoft guns, Blank guns, and accessories over at Replica Airguns Canada and Replica Airguns US.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer P320 Blowback Pellet Pistol in the US

View fullsize

First Look & Overview

In this table top review, taking a detailed look at the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol, a modern, competition-style airgun replica that closely mirrors its real steel counterpart. This model stands out with its aggressive styling, compensated muzzle, and optics-ready slide, making it one of the more premium-looking pellet pistols currently available.

This is a pellet-only airgun with blowback action, designed more for realism and handling than raw velocity. If already familiar with the Sig Sauer M17 pellet pistol, this one shares a lot of mechanical similarities, including the magazine system.

Specifications

• Caliber: .177 Pellet

• Action: Semi-auto, blowback

• Magazine: 20-round belt-fed rotary system

• Power Source: 12g CO2 (tool-free cam lever system)

• FPS: Claimed 340 FPS

• Weight: ~2.3 lbs

• Overall Length: 8.5 inches

• Barrel Length: 4.6 inches (rifled)

• Construction: Metal slide, polymer frame

• Sights: Fixed white dot front and rear

• Optics Ready: Yes (SIG Air RMR compatible)

• Rail: Picatinny accessory rail

• Safety: Ambidextrous manual safety

View fullsize

Build Quality & Design

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol delivers a solid mix of metal and polymer construction. The metal slide gives it realistic weight and feel, while the polymer frame helps keep things balanced. At around 2.3 pounds, it has a substantial presence in hand without feeling overly heavy.

The grip features enhanced texturing along with a flared magwell, adding to both aesthetics and usability. The slide includes light porting and is optics-ready, allowing for easy installation of a SIG Air RMR red dot.

One standout visual element is the compensated muzzle, which adds to the competition-style look. However, it also impacts field stripping, you’ll need to remove it to fully disassemble the slide.

View fullsize

Magazine & CO2 System

This pistol uses a 20-round belt-fed rotary magazine, which is housed within a drop-out mag body. Loading is straightforward:

• Remove the rotary belt insert

• Load pellets into each chamber

• Reinsert into the mag

CO2 is loaded using a tool-free cam lever system, which is fast and convenient compared to traditional screw-in designs.

Important note: the magazine needs to be firmly seated. A light insertion may not lock it properly, and due to the weight, it could fall out if not fully engaged.

Also worth noting, while the outer mag housing has some polymer components, the internal structure is mostly metal. Still, avoid dropping it on hard surfaces.

View fullsize

Handling & Controls

• Ambidextrous safety works from both sides, though visual indicators are only clearly marked on one side

• Trigger feels closer to double-action due to the rotary magazine indexing

• Slide cycles with blowback but does not lock back when empty

• Takedown lever is present, but full disassembly is limited by the compensator

The trigger has a solid feel and requires deliberate pull due to the indexing mechanism. This is normal for belt-fed pellet systems.

View fullsize

Sights & Optics

The pistol comes with fixed white dot sights, which are effective for quick target acquisition. However, they are not adjustable.

For those wanting more precision, the pistol supports SIG Air RMR optics, replacing the rear sight with an included plate.

Performance Expectations

The claimed velocity is 340 FPS, which is typical for blowback pellet pistols. Expect slightly lower speeds with lead pellets (recommended) compared to alloy pellets.

Blowback operation will also consume more CO2 than non-blowback models, trading efficiency for realism.

If looking for a performance reference, similar results can be expected to the Sig Sauer M17 pellet pistol due to shared internals.

View fullsize

Pros

• Excellent replica accuracy of the P320 Spectre Comp

• Realistic blowback with metal slide

• Good weight and balance (~2.3 lbs)

• 20-round high-capacity pellet magazine

• Tool-free CO2 cam lever system

• Rifled barrel optimized for pellet shooting

• Optics-ready (SIG Air RMR compatible)

• Flared magwell and enhanced grip texture

• Picatinny rail for accessories

• Magazine compatibility with M17

Cons

• Lower FPS compared to non-blowback pellet pistols

• Higher CO2 consumption due to blowback

• Fixed (non-adjustable) sights

• Pellet-only (no BB capability, though this protects rifling)

• Slide does not lock back when empty

• Field stripping requires compensator removal

View fullsize

Final Thoughts

The Sig Sauer P320 Spectre Comp pellet pistol is a strong option for anyone prioritizing realism, handling, and modern styling over raw power. It delivers a premium look with solid functionality, especially for training, backyard shooting, or collectors wanting a high-end replica.

While not the most powerful pellet pistol available, it excels in design, usability, and realism, especially if already a fan of the P320 platform.

For those in Canada, availability may already be live, with US availability likely to follow.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

A surprise “tiny box” delivery turned out to be a solid addition to the lineup, the SIG Sauer P320 Spectre Comp Pellet Pistol. Despite the small packaging, this is a full-featured CO2-powered pellet pistol with a strong focus on realism and competition-style design.

Right out of the box, the Spectre Comp feels substantial, coming in at around 2.29 lbs with a metal slide and polymer frame. It features a semi-auto blowback action and uses a 20-round belt-style pellet magazine, typical of SIG’s higher-capacity pellet systems.

Key highlights include:

• CO2 powered (.177 caliber pellet)

• Blowback action (semi-auto)

• 20-round belt magazine

• Approx. 340 FPS velocity

• Optics-ready slide (RMR plate compatible)

• Ambidextrous safety and controls

• Flared magwell for faster reloads

• Picatinny accessory rail

• Field-strip capable design (with compensator removal)

View fullsize

The pistol leans toward a competition-style setup, featuring a skeletonized trigger, ported slide, and a compensated front end for aesthetics. While the slide does not lock back (common for belt-fed pellet systems), the blowback adds to the overall shooting realism.

Loading is straightforward thanks to the tool-free CO2 system and two-piece magazine design. The trigger pull feels more like a double-action due to the belt cycling, which is typical for this platform.

Overall, the P320 Spectre Comp CO2 Blowback Pellet Pistol looks to be a well-built, feature-rich option for those wanting a realistic training pistol with added competition styling. A full tabletop review and field test shooting results will follow once it’s put through proper testing.

• Buy the SIG Sauer P320 Spectre Comp Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

Replica Airguns takes a step back in time to share how everything began, long before the channel, website, and stores grew into what they are today. The journey started around 2006, just a year after YouTube first launched. At the time, online video was still in its infancy, with low-resolution clips, shaky footage, and minimal production quality being the norm.

Mike created the very first video simply for fun. It featured a modified Umarex Walther PPK BB gun that Mike had altered for full-auto shooting. Edited in iMovie on a Mac and uploaded in low resolution (under 640×480), the video wasn’t intended to be anything more than a casual experiment. However, after sitting online for a few months, it unexpectedly reached around 100,000 views, an impressive number for that era, when far fewer creators were uploading content and viral videos were rare.

That early success revealed something important: there was real interest in Airguns and BB gun content. From there, Mike purchased more Airguns (to his wife’s disapproval), more videos were created, and the foundation for a focused channel began to take shape. A few years later, the project became more serious, evolving into a dedicated platform and eventually transitioning into the Replica Airguns brand you see today!

Over time, the brand expanded into multiple websites, ReplicaAirguns.com, ReplicaAirguns.ca, and ReplicaAirguns.us, along with a large video library. Although the channel faced setbacks, including being removed from YouTube at one point, the content continued to live on through platforms like Vimeo and Rumble. Now, with nearly all videos being restored back to YouTube, the library is close to fully rebuilt.

The original video that started it all was thought to be lost for years, buried on old storage drives. Recently rediscovered, it has been enhanced using modern AI tools to improve clarity while still preserving its original look and feel. Despite its dated quality, it represents the true starting point of the Replica Airguns journey.

For viewers interested in Airguns, including BB guns, Airsoft, Pellet guns, and more, the channel and websites continue to offer extensive content and product availability across both Canadian and U.S. online stores.