View fullsize

We are back on the indoor range for another dedicated shooting assessment, shifting gears to focus entirely on the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle. This is a .22 caliber lever-action pellet rifle that uses CO2 and features authentic shell-ejecting and shell-loading mechanisms. For this session, the focus turns squarely to downrange performance, tracking velocity consistency over the chronograph and a dedicated paper target test to evaluate its accuracy. if you haven’t already checked out my table top review for the Barra 1866 Tactical, you can do that here

Chronograph & Velocity Baseline

The Barra 1866 Tactical is powered by dual 12 gram CO2, and for this test, we started with brand new cartridges in slightly chilly conditions just under room temperature. To establish our velocity baseline, the rifle was run with fairly heavy grain (15.43 grain) Gamo Match Diablo .22 caliber pellets across a standard testing string.

Here is how the shot string registered over the sensor:

• Shot 1: 321 FPS

• Shot 2: 349 FPS

• Shot 3: 353 FPS

• Shot 4: 333 FPS

• Shot 5: 337 FPS

• Average of 339 FPS with 4 foot pounds of energy

The rifle turned in an overall performance generally hovering around the mid-300 FPS mark in these slightly cooler conditions. Previously, the non-tactical brass version achieved closer to 400 FPS, suggesting that warmer temperatures and lighter pellets might yield higher velocities.

View fullsize

Target Accuracy & Grouping Results

Moving to the paper target, the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle was aimed using its factory open sights at a distance of 30 feet. While a pistol red dot was initially placed on the back, a dead battery meant sticking to the standard open sights. Aiming just below the bullseye, the sights centered perfectly left and right.

Cycling the lever and ejecting the shells proved to be an engaging experience. The shots struck a bit high on the target, but the rounds clustered decently once the proper zone was found. The pellets generally wanted to group about an inch and a half away from each other. Despite shooting slightly high, the rifle delivered noticeable impact energy and a solid "wallop" downrange even managing to make the target pop off the pellet backstop.

Shooting Impressions & Operational Notes

Running the Barra 1866 through a shooting sequence highlights a few distinct mechanical characteristics:

• Shell Ejecting Mechanism: The shell-loading and ejecting action is highly enjoyable, adding a fun and realistic element to the shooting rhythm.

• Lever Cocking Safety: A crucial operational note is that the lever must be pulled tightly to the stock to disengage the secondary safety. If the lever is not pulled tight against the stock, the rifle will not fire.

• Sights: The open sights function well and center perfectly left and right, though they may shoot slightly high depending on the range.

Final Thoughts

The Barra 1866 .22 Caliber Tactical Lever Action Pellet Rifle proved to be a tremendously fun shooter. Delivering respectable velocities with heavy pellets and decent accuracy out of the box, it stands out as an engaging option for lever-action enthusiasts. For shooters seeking a realistic plinker, it remains a highly enjoyable choice.

Available at:

🇨🇦 Buy the Barra 1866 Tactical in the Canada Replica Airguns Store

🇺🇸 Buy the Barra 1866 in the US Replica Airguns Store

View fullsize

In this table top review, we are taking a close look at the Barra 1866 Tactical CO2 Lever Action .22 Caliber Pellet Rifle. While the original classic version featured a gold receiver and faux wood stock, this updated model brings a modern tactical aesthetic to the classic Winchester 1866 platform. The biggest draw to the Tactical version is the black synthetic stock, the M-LOK handguard, and the multiple Picatinny rail options for adding modern accessories.

View fullsize

Key Specifications:

• Model: Barra 1866 Tactical.

• Type: Pellet Rifle.

• Caliber: .22 caliber pellets.

• Power Source: Dual 12-gram CO2 cartridges (housed in the rear buttstock).

• Velocity: Claimed 450 FPS.

• Action: Single-Action Lever Action Repeater.

• Safety: Thumb safety behind the hammer and a secondary grip safety built into the lever.

• Barrel: 18-inch rifled steel octagonal barrel.

• Construction: Mostly all-metal construction with a black synthetic stock and handguard.

• Weight: 6.5 lbs (2.9 kg).

• Overall Length: 38.5 inches (90.7 cm).

• Sights: Flip-up rear iron sight (featuring a peep notch and a lower notch).

• Optics Rail: Removable short Picatinny rail over the receiver and a long continuous Picatinny rail on the handguard.

• Magazine Capacity: 10-shot tube magazine (comes with 10 silver shells designed specifically for the .22 caliber version).

View fullsize

Handling & How It Works: Weighing in at 6.5 pounds and measuring 38.5 inches long, the Barra 1866 Tactical has an incredibly solid feel thanks to its heavy metal receiver and barrel. This is a single-action lever action repeater, meaning you must manually cycle the lever to cock the hammer and load a shell into the breach for every shot. To fire, you load the individual shells into the tube magazine, rack the paracord-wrapped lever downwards to chamber a round, ensure the lever is squeezed snug against the stock to disengage the secondary safety, and pull the metal trigger. When you rack the lever again, the empty shell ejects straight out the top of the action just like the real deal.

View fullsize

Pros:

• Excellent heavy weight and realistic feel thanks to the nearly all-metal construction.

• The sleek black synthetic stock and M-LOK handguard completely update the classic platform into a modern tactical rifle.

• Very few replica rifles are available in .22 caliber, which offers fantastic downrange energy and impact.

• Abundant mounting options: M-LOK slots and multiple Picatinny rails make it incredibly easy to add red dots, flashlights, lasers, or bipods.

• The custom paracord-wrapped lever handle looks great and improves grip comfort during cycling.

• Dual 12-gram CO2 system provides a very cost-effective power source with less cool-down effect than a single cartridge, allowing for extended shooting sessions.

• Operating the lever and watching the empty casings eject vertically makes this gun incredibly rewarding and fun to shoot.

• The claimed 450 fps gives you plenty of power for mid-range target shooting and small pest control.

View fullsize

Cons:

• Because the empty shells eject vertically straight out of the top, you cannot easily mount a traditional magnified rifle scope directly over the receiver; an offset red dot or long eye-relief pistol scope mounted further forward is required.

• You will inevitably lose some of the ejecting shells if you shoot outdoors in the grass, so picking up a spare set is highly recommended.

• The lever must be held firmly snug against the stock while shooting, otherwise the built-in secondary safety will prevent the trigger from pulling.

View fullsize

If you are looking for a fun, realistic lever-action repeater that combines nostalgic shell-ejecting operation with modern tactical accessory compatibility, the Barra 1866 Tactical is a fantastic option. Stay tuned for the Field Test Shooting video coming up shortly.

Available at:

🇨🇦 Buy the Barra 1866 Tactical in the Canada Replica Airguns Store

🇺🇸 Buy the Barra 1866 in the US Replica Airguns Store

View fullsize

Getting a mystery box from the Canadian Replica Airguns warehouse feels a lot like Christmas and we are getting closer to Christmas... Today's unboxing was a tall package, and while it contained some excellent accessories, including Gear Stock 6mm airsoft BBs, a UV-activated Airsoft tracer unit, and a LiPo safety bag—the real highlights were two very distinct lever-action rifles.

Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle

The first rifle out of the box is the Barra 1866 Tactical CO2 Edition. It takes the classic 1866 lever-action platform and gives it a highly modular, modernized upgrade.

Initial Thoughts & Basic Specs:

• Ammunition & Power: This model is a .22 caliber pellet rifle that runs on a dual CO2 system housed in the back.

• Realistic Operation: It features a fully functional shell-ejecting system and includes ten metallic shells.

• Smooth Action: Operating the lever action on this rifle feels incredibly smooth.

• Tactical Upgrades: The tactical design includes top and bottom Picatinny rails and an octagonal barrel.

• Sighting: The rifle comes with a front sight and a versatile rear sight that functions as a notch or flips up into a peep sight.

View fullsize

Daisy 499B Match Grade Champion Lever Action BB Rifle

The second rifle is the Daisy 499B Match Grade Champion, famously billed as the world's most accurate BB gun. It feels essentially like a highly enhanced Daisy Red Ryder on steroids.

Initial Thoughts & Basic Specs:

• Premium Build: This is a full-sized rifle featuring a beautiful, fully wooden stock and forend. It is noticeably longer and more robust than a standard Red Ryder.

• Action: The metal lever produces a heavy, satisfying clunk when cocked during a dry fire.

• Competition Sights: Built for precision, it utilizes a front peep sight and a very small rear peep sight.

• Extras: A heavy-duty shooting sling is included in the box.

• Target Audience: While it is a fantastic platform for younger shooters, its larger size and premium quality make it highly suitable for older youths and adults.

I am incredibly excited to put both of these lever actions to the test. I will be producing full tabletop and field test shooting videos for both rifles very soon, so stay tuned.

View fullsize

A lot of folks look at Replica Airguns and write them off as just toys or backyard plinkers. Spoiler alert: they are far from toys. In fact, Replica Airguns are some of the most practical, cost-effective, and accessible firearm training tools available on the market today. Whether you're running a full-blowback 4.5 mm steel BB pistol, a gas blowback Airsoft sidearm, or even a 43 caliber rubber ball trainer, these platforms offer real-world training benefits that transfer directly to live firearms.

Below, we break down how Replica Airguns stack up against real steel across the core fundamentals of shooting.

1. Holster Draw & Presentation

• The Comparison: High-end replica pistols feature 1:1 scale dimensions and realistic weight compared to their firearm counterparts. They fit into standard duty, concealed carry, and competition holsters with zero fuss.

• The Training Advantage: Practicing draw stroke and presentation from a holster requires massive repetition to build muscle memory. Replica Airguns give you that identical feel, but with a massive safety buffer. If you suffer an accidental discharge during a high-speed draw-and-fire drill, an Airsoft BB or steel BB might leave a bruise or require a minor patch-up, but it won't cost you a limb or your life.

2. Trigger Control & Grip Technique

• Trigger Feel: Full-blowback Replica Pistols replicate single-action/double-action trigger weights, pulls, and resets very closely to real steel guns. (Keep in mind that non-blowback or partial-blowback models often have heavier, double-action-only trigger pulls due to internal indexing).

• The Grip Technique: Building a solid modern shooting grip transfers 100% to Airguns.

  • Your strong hand pushes forward slightly into the backstrap with relaxed finger tension so you don't jerk the trigger.

  • Your support hand clamps down hard like a vise, pulling backward to lock the pistol into place.

• Practicing this push-pull clamping technique on an Airgun builds clean muscle memory without introducing flinching.

View fullsize

3. Recoil Management & Sight Transition

• Where Airguns Differ: While full-blowback Airguns provide a snappy mechanical cycling sensation, they don’t generate the sharp muzzle rise and concussive kick of a live 9mm or .45 ACP round. An Airgun slide tends to cycle and dip forward quickly, whereas a real gun snaps violently upward.

• The Takeaway: You won't get identical recoil impulse, but your eyes and hands still have to track the sights as the slide moves. It teaches rapid target acquisition, sight alignment, and consistent presentation between shots at a fraction of the physical fatigue.

4. Reloads & Malfunction Drills

• Clearing Drills: You can practice tap-rack-bang, speed reloads, and slide manipulations just like on the range.

• Important Safety Tip: If you are practicing slide-racking drills with an airgun, do it dry without BBs loaded in the magazine. Unlike live firearms (which eject the unfired cartridge when racked), cycling an Airgun slide repeatedly will often chamber multiple BBs into the breech.

• Practicing stoppages and magazine drops with Airguns lets you run fast drills at home without the hazards of live ammo.

5. Cost & Durability

• Operating Cost: Real ammunition adds up fast, a single box of 50 rounds of 9mm often runs $30 to $50. With an Airgun, that same round count in CO2 and BBs costs literally a couple of dollars. You can shoot 10 to 20 times more rounds on an Airgun budget.

• Build Quality: Real firearms are built from hardened steels and durable polymers meant to withstand thousands of high-pressure explosions. Replica Airguns are engineered for lower internal pressures, often utilizing aluminum alloys and cast metals. While they last for thousands of rounds, dropping an Airgun on concrete can damage components more easily than a live firearm. Treat them with care!

View fullsize

6. Training Environment & Accessibility

• No Range Trip Required: Live firearms require dedicated range time, travel, fees, and strict transport regulations (especially here in Canada with transport permits and licensing).

• Backyard & Basement Friendly: With an appropriate trap and backstop, Airsoft and rubber-ball guns are perfect for indoor garage or basement practice, while steel BBs excel in safe outdoor home setups. You can get quality reps in during 15 minutes of free time after dinner without ever packing up a range bag.

The Verdict

Are replica airguns a complete 100 %$ replacement for live-fire training? No, you still need live range time to master heavy recoil management and acoustic discipline.

However, for mastering the holster draw, establishing sight alignment, refining trigger pulls, and building consistent grip mechanics, Replica Airguns are second to none. They make high-frequency shooting training safe, cheap, and convenient.

What's Next?

Stay tuned next week, we have a mystery box unboxing arriving at the table with some brand-new product or products lined up for comprehensive reviews!

• Make sure to subscribe to the channel on YouTube, Vimeo, and Rumble.

• Follow our community updates on Instagram, Facebook, and Twitter.

• Ready to gear up? Visit ReplicaAirguns.ca (Canada) or ReplicaAirguns.us (USA) for pistols, rifles, CO2$ and training accessories.

View fullsize

While waiting for new guns to arrive for field and tabletop testing, it is the perfect time for an educational breakdown of blowback versus non-blowback Replica Airguns. When choosing between these styles, the core decision comes down to a trade-off: do you want the ultimate realism, or do you want maximum power and gas efficiency?

View fullsize

Full Blowback: The Ultimate Training Tool

Full blowback airguns are designed for the shooter who wants a true trainer with the most realistic functionality and breakdown.

• The slide cycles completely back with every single shot to provide simulated recoil.

• These models generally feature a true single-action trigger, which gives the shooter a lighter and shorter trigger pull.

• When the magazine is out of ammunition and the follower reaches the top, the slide will lock back just like a real firearm.

• They typically use full-size drop-out metal magazines that hold both the BBs or Airsoft BB’s and the CO2 cartridge.

• The main downside is that they require a massive amount of CO2 to simultaneously propel the ammunition and aggressively cycle the slide.

• This high gas usage causes the gun to cool down much quicker, which noticeably lowers the velocity of your shots.

• If the gun gets too cold during rapid fire, the CO2 valve can become sluggish and even lock open.

View fullsize

Non-Blowback: Power and Efficiency

Non-blowback airguns are built for the shooter who wants the most power and the highest number of shots to break targets downrange.

• The slide remains completely fixed in place and does not cycle when the gun is fired.

• Because there is no slide to cock the internal hammer, they rely on a true double-action trigger, resulting in a heavier and longer pull.

• While some models have full-size drop-out magazines, it is very common for non-blowback guns to use thinner stick magazines.

• They are significantly more efficient because all the CO2 is dedicated solely to firing the ammunition out of the barrel.

• The lack of blowback action means the gun does not cool down nearly as fast.

• They deliver higher overall shot velocities and can operate much more reliably in slightly colder temperatures.

View fullsize

Partial Blowback: The Middle Ground

For those who cannot decide between the two extremes, partial blowback models offer a compromise between realism and efficiency.

• The slide still cycles to provide simulated recoil, but it only travels part of the way back.

• The trigger feel sits somewhere between a true double-action and a single-action pull.

• They consume less gas than a full blowback model, but they still use more than a non-blowback model.

• They usually come equipped with full-size drop-out metal magazines.

• Many newer partial blowbacks feature a system where pulling the trigger pushes the BB directly into the barrel to create a tight seal, resulting in excellent CO2 efficiency and higher velocities than a full blowback Airgun.

Whether you are looking for Airguns, Airsoft rifles, Pellet guns, Blank guns, or Accessories, Canadians can shop at replicaairguns.ca and US customers can shop at replicaairguns.us. You can also explore thousands of past video reviews and connect on Facebook, Twitter, Instagram, Rumble, YouTube, and Vimeo.

View fullsize

Today I am testing out the Crosman 2240XL Special Edition here in the Sea Can indoor shooting range. It is getting a bit colder and raining outside, but the Sea Can is sitting at a comfortable 19 to 22 degrees Celsius, providing a great baseline environment for testing a fresh CO2 cartridge. If you haven't already, be sure to check out the dedicated Table Top Review for all the specifications and build details on this model. For this field test, our focus is entirely on performance: running it through the chronograph for real-world velocity and testing the downrange accuracy.

Chronograph & Velocity Performance For the velocity baseline, I used a brand new CO2 cartridge and loaded up some heavier .22 caliber Crosman Premier Hollow Points, which sit around the 14 to 15-grain mark. Crosman claims around 460 FPS on the box, but keep in mind that is typically achieved using the lightest possible ammunition.

Here is how the 5-shot string performed through the chronograph:

• Shot 1: 329 FPS

• Shot 2: 330 FPS

• Shot 3: 337 FPS

• Shot 4: 335 FPS

• Shot 5: 335 FPS

View fullsize

The Crosman 2240XL Special Edition settled in nicely around a 333 FPS average. Because this is a bolt-action setup rather than a fast-firing semi-auto, the CO2 doesn't cool down too rapidly between shots, which helps keep the velocity remarkably consistent across the string.

Downrange Accuracy & Target Testing Moving over to the accuracy test, I set up a fresh paper target 30 feet downrange. For this setup, I decided to mount a bit of a monstrosity of a 4x optical magnification scope using the dovetail mounts, which I pulled right off another gun just for this test.

I took about 9 shots from a rested position on the table. The first two shots were close together, but the grouping eventually opened up to about 2 inches, including one major flyer that I definitely didn't feel like I pulled. Honestly, I wasn't super impressed with this particular grouping. The 2240 platform is famous for its accuracy, so this spread might be down to a few different factors: potential nicks on the pellets during loading, the cheap optical sight I attached, or just user error while trying to stabilize it.

View fullsize

Handling Notes & Optics Fitment One of the absolute highlights of the Crosman 2240XL Special Edition is the trigger. It has a very nice, light, and short pull with essentially zero break required. However, shooting a pistol with a magnified scope from a rested position proved to be awkward. Trying to pull a pistol-length platform close to your face for proper eye relief (using a rifle scope rather than a pistol scope) can make everything feel quite shaky.

If you plan on running a larger optic like this, I highly recommend adding a shoulder stock to help stabilize the gun. Alternatively, swapping the massive scope out for a compact red dot or sticking to standard pistol sights would make this much more comfortable to shoot in its stock pistol form.

Final Thoughts The Crosman 2240XL remains an incredibly highly modifiable platform, fitting right in with the various pumper and .177 caliber variants available on the market. While my grouping today wasn't the tightest, the potential of this gun is massive once you dial in the right optics, ammo, and perhaps a stock for better stability.

Where to Buy

• 🇨🇦 Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• 🇺🇸 Buy Pellet Pistols in the US

View fullsize

Welcome back to Replica Airguns. I get asked all the time about which airguns hit the hardest, but a lot of people focus on the wrong attributes. They often look strictly at velocity instead of the raw energy and blunt force required for different tasks.

In this guide, we are breaking down the four main types of airgun ammunition: Airsoft, steel BBs, lead pellets, and rubber balls. The goal is to show you exactly what each ammo type excels at and where they fall short so you can choose the right tool for your specific needs.

View fullsize

6mm Airsoft: Safe Training and Plinking

Airsoft guns fire 6mm round balls, which are generally made of plastic, though you can find copper or zinc-coated variants. Because these are some of the lightest projectiles, ranging from 0.20 to 0.45 grams, they have the lowest overall energy and often lower velocities.

• Best For: Airsoft is ideal for force-on-force skirmishes (with proper eye protection) because the lightweight rounds sting but do not penetrate the skin.

• Practical Uses: They are great for safe indoor garage shooting without the risk of breaking windows, or for humanely chasing nuisance crows or vermin out of your yard without causing them permanent harm.

• Platform Tech: Heavier airsoft rounds utilize backspin, or "hop-up", to float straight through the air for better accuracy, and they are typically fired from highly realistic, full-blowback gas or CO2 replica pistols. Most rifle Airsoft guns are AEG’s using a battery and spring setup which allows for easy semi and full auto operation.

• Worst For: These are entirely ineffective for pest control (extermination) or any scenario requiring deep penetration or high impact energy.

View fullsize

4.5mm Steel BBs: Fast-Action Shooting

Steel BBs are 4.5mm in diameter, which translates to a .177 caliber round ball. Weighing in at approximately 5.3 grains, they are much denser than Airsoft rounds.

• Best For: Steel BBs are fantastic for fast-action plinking, breaking glass bottles, and tearing up pop cans.

• Platform Features: These are often used in 1-to-1 replica blowback pistols with drop-out full size magazines, giving shooters an authentic firearm feel for tactical manipulation practice.

• The Dangers: Steel does not deform upon impact, meaning these BBs are highly prone to dangerous ricochets if you shoot at hard surfaces indoors or up close.

• Worst For: Steel BBs lack the blunt force for home defense and are unethical for pest control as trey are a bit under powered and generally not as accurate as similar pellet guns.

View fullsize

Lead Pellets (.177 and .22 Caliber): Precision and Pests

Unlike round BBs, pellets are designed to be fired through a rifled barrel. Common sizes include .177 caliber (4.5mm, weighing 5 to 10 grains) and the much heavier .22 caliber (5.5mm, weighing 12 to 16 grains).

• Best For: The soft lead engages the spiral grooves in a rifled barrel, providing unmatched precision and accuracy.

• Terminal Ballistics: Because lead is soft, it expands and flattens upon impact, transferring its heavy kinetic energy directly into the target.

• Practical Uses: This improved energy transfer makes pellets the ethical choice for small pest control.

• Worst For: Pellet platforms are rarely designed as rapid-fire action shooters; they typically utilize slower single-shot (bolt actions) or rotary magazines that can require a bit of trigger finger strength to shoot quickly.

View fullsize

Rubber Balls (.43, .50, and .68 Caliber): Less-Lethal Blunt Force

This category represents the heavy hitters, firing massive projectiles that range from soft sponge rubber to dense steel-core balls, dust balls, and pepper balls.

• The Power Factor: A .68 caliber home defense marker can produce upwards of 20-50 Joules (or roughly 15-35 foot-pounds) of energy with dedicated home defense styled Rubber Ball Guns.

• Best For: The .68 caliber and high-powered .50 caliber options are explicitly designed for less-lethal home defense.

• How They Work: Instead of penetrating, these massive projectiles dump incredible raw energy and blunt force directly onto the target, effectively stopping threats through extreme pain.

• Training Options: The smaller .43 caliber variants are frequently chambered in realistic blowback replica pistols, making them excellent for tactical and paintball-style force-on-force training.

At the end of the day, picking the right Airgun comes down to matching the ammunition mass and energy to your target. You can find all the gear discussed here, from Airsoft replicas to less-lethal launchers, at the Replica Airguns Canada and US stores. Make sure you are subscribed to our channels across Rumble, YouTube, Vimeo, Instagram, X and Facebook for more detailed reviews and field tests.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

In this table top review, we are taking a close look at the Crosman 2240XL Special Edition, a .22 Caliber CO2 Pellet Pistol. While I haven't shot this exact model yet, I have shot the standard 2240 non-XL version, and they share a very similar firing mechanism. The biggest draw to the XL version is the factory-upgraded metal breech with an 11mm dovetail rail, and the threaded muzzle for added versatility.

View fullsize

Key Specifications:

• Model: Crosman 2240XL Special Edition

• Type: Pellet Pistol

• Caliber: .22 caliber lead pellets

• Power Source: 12-gram CO2 (1 cartridge)

• Velocity: Up to 460 FPS

• Action: Single-Shot Bolt Action

• Safety: Cross-Bolt Safety

• Barrel: Rifled Steel Barrel, Threaded muzzle (1/2" x 20 threads)

• Stock/Grips: Plastic grips

• Construction: Mostly metal (steel breech, barrel, loading chamber) with plastic grips

• Weight: 1.8 lbs

• Overall Length: 12.5 inches

• Sights: None included

• Optics Rail: 11mm Dovetail Rail

View fullsize

First Impressions & Build Quality:
The 2240XL brings a much-needed factory upgrade to the legendary 2240 platform: a full steel breech. This alone is a huge addition, making the gun stand out and providing a much higher quality feel. The gun is almost entirely metal, including the barrel, CO2 loading chamber, bolt, and breech. The grips are plastic, which is fairly standard, but one of the best things about the Crosman 2240 platform is how highly customizable it is. There are countless aftermarket parts available, and you can even easily swap out the grips fro wood grips or for a Crosman shoulder stock to turn it into a backpacker-style carbine.

Weighing in at 1.8 pounds and measuring 12.5 inches long, The Crosman 2240XL Special Edition has a solid feel in the hand. The threaded barrel comes with a thread protector and gives you options for adding mock suppressors or other attachments.

View fullsize

How It Works:
This is a single-action, bolt-action pellet pistol. To operate it, you must first cock the bolt and manually load a .22 caliber pellet into the chamber. Once the bolt is pushed forward and locked down, the trigger is engaged and ready to fire. Powered by a single 12-gram CO2 cartridge housed in the lower tube, it is capable of firing up to 460 FPS depending on the weight of the pellets used. Because it's a single-shot bolt action, you'll need to manually load a pellet for every shot, but you won't need to pump it since the CO2 provides the power.

View fullsize

Pros:

• Upgraded steel breech from the factory provides a robust build and premium look.

• Built-in 11mm dovetail rail makes adding a red dot or magnified optic easy.

• Threaded muzzle (1/2" x 20 threads) with an included thread protector for attachments.

• Solid CO2 power at up to 460 FPS.

• Highly customizable platform with endless aftermarket parts available.

• Excellent light single-action trigger with very little take-up.

• Mostly metal construction ensures long-lasting durability.

View fullsize

Cons:

• Does not come with any open sights, an optic is required out of the box.

• Relies on CO2, meaning velocities will fluctuate as the gun cools down during rapid fire and potentially as CO2 volume lowers.

• Standard plastic grips are somewhat basic.

View fullsize

Final Thoughts:
The Crosman 2240XL Special Edition takes an already proven pistol and adds the features most shooters end up buying aftermarket anyway. Having the steel breech and dovetail rail right out of the box makes mounting an optic straightforward, and the threaded muzzle is a fantastic touch, even if it’s just mainly for looks. If you're looking for a powerful .22 caliber airgun for small pest control that can be modified to your exact liking, the 2240XL is a superb starting point.

Stay tuned for the Field Test Shooting video coming up down the road.

Available at:

• 🇨🇦 Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• 🇺🇸 Buy Pellet Pistols in the US

We are halfway through September, and another unannounced delivery just showed up at the door. This box was surprisingly compact but incredibly dense, hinting at a hefty amount of possible ammunition inside. Cracking it open revealed a massive 4,000-count bottle of BBs and an updated classic from Crosman.

Gear Stock 4.5mm Copper-Coated Steel BBs

The sheer weight of this package came from a bulk 4,000-round bottle of Gear Stock 4.5mm steel BBs. These specific rounds feature a copper coating, which looks great but comes with a few historical caveats.

• Copper vs. Zinc: In my experience, copper-coated BBs can tarnish over time. Unlike zinc, which stays relatively clean, older copper coatings can oxidize and leave a dark, powdery residue on your hands and inside your airgun's barrel.

• Quality Check: If you burn through your ammo quickly, the tarnishing won't be an issue. We will have to see if modern manufacturing has improved the coating durability on this Gear Stock batch, but I typically lean toward zinc-coated BBs for long-term storage and cleaner shooting.

• Buy Gera Stock BB’s in Canada

• Buy Gear Stock BB’s in the US

View fullsize

The Crosman 2240 XL .22 Caliber CO2 Pellet Pistol

The main event in this box is the Crosman 2240 XL. The 2240 platform has been a staple in the airgun community for decades, and the XL version finally addresses the most common pain points shooters had with the base model out of the box.

• Core Specs: The 2240 XL is a CO2-powered, bolt-action, single-shot pistol chambered in .22 caliber. It weighs in at 1.8 pounds, features a rifled steel barrel, and utilizes a standard 12-gram CO2 cartridge.

• The Metal Breech Upgrade: The standard 2240 and its multi-pump cousin, the 1322, utilize a plastic breech. Mounting an optic on those older models requires clamp-on barrel adapter rings, which can easily twist out of alignment. The 2240 XL ships with an upgraded all-metal breech featuring a milled 11mm dovetail rail, allowing for a rock-solid red dot or scope mount straight from the factory.

• Threaded Muzzle: The front of the barrel has a threaded muzzle cap. You can unscrew the tip to attach 1/2" UNF aftermarket compensators or moderators, adding another layer of customization.

• Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• Buy Pellet Pistols in the US

View fullsize

Customization and Practical Application

Because the 2240 XL features a dovetail rail instead of iron sights, it is built specifically for optics. This plays perfectly into the massive aftermarket support for Crosman’s 22xx and 13xx platforms.

I own a heavily modified "backpacker" setup on one of my personal Crosman .22s, featuring a skeletonized rear shoulder stock and a magnified scope. At sub-500 FPS, a .22 caliber pellet is highly effective for close-range pest control. When dealing with nuisance animals like crows attacking songbirds, an ultra-high-velocity pellet will often pass straight through the target, wasting its kinetic energy. A heavier .22 pellet moving at moderate speeds dumps its full energy upon impact, providing a much more immediate and humane dispatch.

The full tabletop and field test shooting videos for the Crosman 2240 XL are coming up next. Make sure you are subscribed on Rumble, Vimeo, X, Threads, or TikTok to catch the full performance breakdown when it goes live.

View fullsize

In this Table Top Review, we're taking a detailed look at the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. As always, this is a Table Top Review only, so there won't be any shooting in this video. However, a dedicated Field Test Shooting Video will be coming later to see how it performs in real-world use.

This is an ASG product, officially licensed by CZ, and it features authentic markings, including the 9x19 stamp. It's a modern, full-blowback airsoft replica that mirrors the real steel CZ P-10 C very closely. Manufactured in Taiwan and distributed by ASG, this model stands out with some excellent out-of-the-box features, making it a highly versatile and realistic option for airsoft shooters.

View fullsize

Specifications

• Caliber: 6mm Airsoft BB.

• Action: Semi-auto, full blowback.

• Power Source: Single 12g CO2 cartridge (Green Gas magazines are also available).

• Magazine Capacity: 22-round full metal drop-out magazine.

• Velocity: ~330 FPS (1.05 Joules) with .20g BBs.

• Weight: 1.63 lbs (730 g).

• Overall Length: 7.09 inches (195 mm).

• Construction: Metal slide, nylon/polymer frame.

• Barrel: 14mm CCW threaded outer barrel.

• Hop-Up: Adjustable (accessible via open ejection port).

• Optics Ready: Yes (optics plate pre-installed).

View fullsize

Build Quality & Design

The ASG CZ P-10 C delivers a solid mix of materials with its metal slide and nylon frame construction. The metal slide gives it a realistic, top-heavy weight and feel, while the nylon frame keeps the overall weight balanced at a manageable 1.63 pounds. The full metal 22-round magazine, which houses the 12g CO2 cartridge, adds substantial weight to the grip, giving the gun a very realistic presence in the hand.

Field stripping is incredibly simple and authentic to the real steel version—just pull down the two tabs and rack the slide forward to remove it. While the most of the frame components are mostly plastic, the heavy metal slide ensures durability where it counts.

View fullsize

Handling & Controls

This pistol is designed with ergonomics and modern handling in mind. It features mostly ambidextrous controls, including an ambidextrous slide catch and release. While the magazine release comes set up for right-handed shooters, it is completely reversible. The pistol includes a working trigger safety and comes with three interchangeable backstraps, allowing you to customize the grip size to perfectly fit your hand.

One of the standout design choices on this airgun is the hop-up adjustment. Instead of having to field strip the pistol to make adjustments, you can access the hop-up wheel directly through the open ejection port when the slide is locked back, a massive time-saver during gameplay.

View fullsize

Sights & Optics

Out of the box, the ASG CZ P-10 C is optics-ready and comes with an optics plate already installed on the slide. If you prefer to run standard iron sights, ASG includes a rear white-dot sight in the box that you can easily swap out by removing the plate. It also features a fixed white-dot front sight for quick target acquisition.

Additionally, the gun features a 14mm CCW threaded outer barrel right out of the box, hidden under a protective orange cap. This makes it instantly ready to accept a mock suppressor or a tracer unit once the cap is removed.

View fullsize

Performance Expectations

With a claimed velocity of around 330 FPS (1.05 Joules) using a 12g CO2 cartridge, it hits perfectly within standard indoor CQB limits while still offering enough power for outdoor play. Because it features full blowback operation paired with a fairly heavy metal slide, you can expect a very crisp, realistic recoil effect with every shot.

View fullsize

Pros

• Officially licensed by CZ with authentic 9x19 markings.

• Full blowback operation with a heavy metal slide for realistic recoil.

• Optics-ready out of the box with the plate pre-installed.

• 14mm CCW threaded outer barrel ready for a suppressor or tracer unit.

• Convenient hop-up adjustment dial accessible through the open ejection port (no field stripping required).

• Includes three interchangeable backstraps to customize grip size.

• Ambidextrous slide release and reversible magazine release.

• Simple and realistic field stripping process.

• Comes in a Black and Tan version

Cons

• Comes with an orange cap on the barrel, though it serves to protect the 14mm threads and can be removed.

• The standard rear sight is not installed out of the box (requires swapping the pre-installed optics plate).

• Internal trigger group components are mostly plastic.

View fullsize

Final Thoughts

The ASG CZ P-10 C CO2 Blowback Airsoft Pistol is a fantastic option for anyone looking for a modern, feature-rich sidearm. It bridges the gap perfectly between a realistic training tool and a highly capable Airsoft primary or secondary. The inclusion of an installed optics plate, a threaded barrel, and a hop-up that doesn't require field stripping shows that ASG really thought about the end-user when designing this replica. I'm looking forward to getting this out for the field test to see how that heavy slide cycles and this Airsoft Pistol tests out on the Chrony and Paper Target.

• Buy the ASG CZ P-10C CO2 Blowback Airsoft Pistol in Canada

• Buy ASG Airguns in the US

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.

View fullsize

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

View fullsize

Specifications:

• Manufacturer: KJ Works

• Made In: Taiwan

• Power Source: 12g CO2

• Ammunition: 6mm Airsoft BBs

• Action: Semi-auto, full blowback

• Trigger: Single-action, skeletonized, adjustable (1911-style)

• Magazine: Full-size dropout metal magazine, 25-round capacity

• Weight: 1.96 lbs (890 g)

• Overall Length: 9.84 inches (250 mm)

• Inner Barrel Length: 4.25 inches (108 mm)

• Claimed Velocity: 366+ FPS

• Hop-Up: Adjustable

• Rail: Under-barrel Picatinny rail

• Sights: Fiber-optic front and rear

• Safety: Ambidextrous

• Magazine Release: Reversible

• Threaded Barrel: Inner and outer threading

• Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

View fullsize

In the Box:

• KP-19S CO2 Blowback Airsoft Pistol

• Full-size metal CO2 magazine

• Inner barrel extension

• Allen keys

• Small bag of Airsoft BBs

• Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

• Same frame, grip, slide profile, trigger guard

• Same skeletonized trigger and hammer

• Same magazine compatibility

View fullsize

Key Differences

• KP-19 (Non-S):

  • Flared magwell

  • Compensator

  • Removable rear plate for mounting a red dot

  • More competition-oriented configuration

• KP-19S:

  • No flared magwell (cleaner, more streamlined look)

  • Fixed rear sight

  • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

• Slide cutouts on the top and sides

• CNC-style gold/brass-colored fluted barrel visible through the slide

• Fiber-optic sights that are extremely easy to pick up

• Ambidextrous safety

• Reversible magazine release

• Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

View fullsize

Field Strip:

Field stripping follows a classic 1911 takedown:

1. Align the slide notch

2. Push out the takedown pin

3. Remove the slide assembly

Once opened, you gain easy access to:

• Inner barrel

• Recoil spring

• Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

View fullsize

Pros:

• High metal content with excellent weight and balance

• Strong, realistic full blowback action

• Excellent fit and finish typical of KJ Works pistols

• High-capacity 25-round metal magazine

• CO2 or gas compatibility (with appropriate magazines)

• Dual threaded barrel for accessories and extensions

• Bright fiber-optic sights (easy to acquire on any background)

• Short, light, adjustable 1911-style trigger

• Ambidextrous safety and reversible mag release

• Easy field stripping and hop-up access

Cons:

• Grip is wide and may not suit shooters with smaller hands

• Higher price point compared to similar KWC 1911 models

• Rear sight is not adjustable and does not accept a red-dot plate

  • Optics would need to be rail-mounted from underneath

View fullsize

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

View fullsize

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine

View fullsize

I had the chance to take the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol out for some testing today in the Replica Airguns Indoor Shooting Range to see how it performs. I’ve already done my close-up tabletop breakdown (specs, build, pros/cons), so if you want the close-up visuals adn details, go check that video out. For this session I concentrated solely on performance, a quick 5-shot chronograph run to record velocity and a 10-round semi auto group at 30 feet followed by the rest of the mag in full auto to get a practical feel for out-of-the-box accuracy.

For the chronograph test I used a fresh 12-gram CO2 capsule with stand.25 gram Airsoft BBs, and the temperature was about 20°C. Five shots with .25 gram Airsoft BBs registered 301, 301, 291, 285, and 281 fps, averaging out to 292 fps. That’s within the expected range for a full-blowback CO2 pistol running heavier .25 gram Airsoft BBs, you’d see higher velocities with lighter .20 gram rounds, and it’s plenty adequate for Airsoft games and target work plinking.

View fullsize

On the accuracy side I fired from 30 feet using a semi-rested shooting position (hands braced on a sandbag while seated). In semi-auto the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol shot just slightly low and a touch left, producing roughly a 2-inch group with most rounds clustered reasonably well. Switch to full-auto, however, and it becomes almost impossible to keep on target, the pistol tended to climb high and stray to the right, putting most shots completely off the target. That full-auto behavior makes it poor for controlled rapid-fire engagement, but in semi-auto it’s much more manageable.

All told, the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol is a strong option if you like the Glock style or already own (or plan to own) a real-steel Glock. physically and mechanically it shares a very similar feel. KJWorks has a reputation for high-quality, well-made products, and this pistol is another solid example. If you don’t need official Glock licensing but want a Glock-based Airsoft pistol, the KP-18 is a great choice, especially for shooters who value realism and good build quality in a reasonably priced package.

• Buy the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US

View fullsize

Type: Blowback CO2 Airsoft Pistol.
Manufacturer: Distributed by KJ Works.
Model: KP-18 TBC.
Materials: Metal & Polymer.
Weight: 1.7 pounds (770 grams).
Total Length: 7.9 inches (20cm)
Barrel: 4 inches (10.6cm) metal non-rifled.
Propulsion: CO2 x 1 (Gas mags available).
Action: Semi & full auto blowback, SAO trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 22 round drop out full size metal magazine.
FPS: Claimed 410 (with barrel extension).

View fullsize

Trigger Pull: The trigger on the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol behaves like a true Single Action Only unit, pleasantly light with a fairly short travel. There’s a bit of initial take-up, but you can clearly sense the crisp break near the rear where the release occurs, extremely light, consistent, and free of any noticeable slack. Remember you’ll need to rack the slide to chamber the first BB; after that the blowback mechanism handles all subsequent cycling.

View fullsize

Accuracy: I haven’t yet fired the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol or produced a Field Test Performance video for it. However, I’ve already completed a full field and shooting test for the very similar KJWorks KP-13, so I’d expect comparable on-target performance between the two. I’ll post a full field test and shooting video for the KP-18 TBC down the road, stay tuned.

View fullsize

Build Quality: KJWorks pistols are generally well made, and I expect the KP-18 TBC to follow that pattern. Based on my hands-on time with the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol and my first impressions of the KP-18, fit and finish look excellent. As with other models, you’ll find metal and polymer components positioned where they would be on a real modern semi-auto pistol, which contributes to the solid, authentic feel.

View fullsize

Realism: The KJWorks KP-18 TBC is a close visual replica of the real-steel Glock G18-style pistol, albeit without official licensing. Umarex holds the Glock license for many BB and Airsoft models, and the fact that a green-gas magazine from the Umarex Glock 17 full-blowback fits the KP-18 suggests KJWorks may be manufacturing some Glock-pattern airguns for Umarex. Glock has historically objected to unlicensed replicas in North America, so how this will play out remains unclear. For now, both licensed and unlicensed options exist for buyers.

View fullsize

Pros:

• Metal and Polymer with decent weight and good feel to it.

• Heavy Full blowback operation.

• Excellent fit and finish as always with KJWorks pistols.

• High capacity full size drop out magazine that holds the CO2 and 22 rounds.

• Well hidden safety incorporated into the serial number under the barrel.

• Working trigger safety.

• White dot front sight and white outlined rear sight for easy target acquisition.

• All working components like a real steel Glock styled pistol.

• Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.

• Comes with barrel extension for higher velocity shooting (Possibly for easier import into Canada).

• Would make a good training weapon if you are a real steel Glock owner.

• Has a semi and full auto selector toggle located on the left rear of the slide.

• Can use CO2 or gas magazines.

• Field strip-able.

• No orange tip.

View fullsize

Cons:

• Sights are not adjustable.

• Full auto will use CO2 like crazy but may be worth it.

• Not a licensed version.

View fullsize

Comments:

If you’re a Glock enthusiast seeking a realistic training piece, you can shoot more affordably and in more places, there are more choices than ever. If official licensing matters, Umarex is the go-to option, although I haven’t seen a full-auto Glock from them yet. For those who prioritize a full-auto-style experience, the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol is as close to a real-steel Glock full-auto feel as you’re likely to find. I also appreciate the magazine interchangeability with some Umarex Glock mags if you already own a Glock 17 Airsoft pistol for instance. Whatever route you choose, it’s great to see more Glock-pattern airguns coming to market.

• Buy the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US