View fullsize

We are back on the indoor range for another dedicated shooting assessment, shifting gears to focus entirely on the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle. This is a .22 caliber lever-action pellet rifle that uses CO2 and features authentic shell-ejecting and shell-loading mechanisms. For this session, the focus turns squarely to downrange performance, tracking velocity consistency over the chronograph and a dedicated paper target test to evaluate its accuracy. if you haven’t already checked out my table top review for the Barra 1866 Tactical, you can do that here

Chronograph & Velocity Baseline

The Barra 1866 Tactical is powered by dual 12 gram CO2, and for this test, we started with brand new cartridges in slightly chilly conditions just under room temperature. To establish our velocity baseline, the rifle was run with fairly heavy grain (15.43 grain) Gamo Match Diablo .22 caliber pellets across a standard testing string.

Here is how the shot string registered over the sensor:

• Shot 1: 321 FPS

• Shot 2: 349 FPS

• Shot 3: 353 FPS

• Shot 4: 333 FPS

• Shot 5: 337 FPS

• Average of 339 FPS with 4 foot pounds of energy

The rifle turned in an overall performance generally hovering around the mid-300 FPS mark in these slightly cooler conditions. Previously, the non-tactical brass version achieved closer to 400 FPS, suggesting that warmer temperatures and lighter pellets might yield higher velocities.

View fullsize

Target Accuracy & Grouping Results

Moving to the paper target, the Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle was aimed using its factory open sights at a distance of 30 feet. While a pistol red dot was initially placed on the back, a dead battery meant sticking to the standard open sights. Aiming just below the bullseye, the sights centered perfectly left and right.

Cycling the lever and ejecting the shells proved to be an engaging experience. The shots struck a bit high on the target, but the rounds clustered decently once the proper zone was found. The pellets generally wanted to group about an inch and a half away from each other. Despite shooting slightly high, the rifle delivered noticeable impact energy and a solid "wallop" downrange even managing to make the target pop off the pellet backstop.

Shooting Impressions & Operational Notes

Running the Barra 1866 through a shooting sequence highlights a few distinct mechanical characteristics:

• Shell Ejecting Mechanism: The shell-loading and ejecting action is highly enjoyable, adding a fun and realistic element to the shooting rhythm.

• Lever Cocking Safety: A crucial operational note is that the lever must be pulled tightly to the stock to disengage the secondary safety. If the lever is not pulled tight against the stock, the rifle will not fire.

• Sights: The open sights function well and center perfectly left and right, though they may shoot slightly high depending on the range.

Final Thoughts

The Barra 1866 .22 Caliber Tactical Lever Action Pellet Rifle proved to be a tremendously fun shooter. Delivering respectable velocities with heavy pellets and decent accuracy out of the box, it stands out as an engaging option for lever-action enthusiasts. For shooters seeking a realistic plinker, it remains a highly enjoyable choice.

Available at:

🇨🇦 Buy the Barra 1866 Tactical in the Canada Replica Airguns Store

🇺🇸 Buy the Barra 1866 in the US Replica Airguns Store

View fullsize

In this table top review, we are taking a close look at the Barra 1866 Tactical CO2 Lever Action .22 Caliber Pellet Rifle. While the original classic version featured a gold receiver and faux wood stock, this updated model brings a modern tactical aesthetic to the classic Winchester 1866 platform. The biggest draw to the Tactical version is the black synthetic stock, the M-LOK handguard, and the multiple Picatinny rail options for adding modern accessories.

View fullsize

Key Specifications:

• Model: Barra 1866 Tactical.

• Type: Pellet Rifle.

• Caliber: .22 caliber pellets.

• Power Source: Dual 12-gram CO2 cartridges (housed in the rear buttstock).

• Velocity: Claimed 450 FPS.

• Action: Single-Action Lever Action Repeater.

• Safety: Thumb safety behind the hammer and a secondary grip safety built into the lever.

• Barrel: 18-inch rifled steel octagonal barrel.

• Construction: Mostly all-metal construction with a black synthetic stock and handguard.

• Weight: 6.5 lbs (2.9 kg).

• Overall Length: 38.5 inches (90.7 cm).

• Sights: Flip-up rear iron sight (featuring a peep notch and a lower notch).

• Optics Rail: Removable short Picatinny rail over the receiver and a long continuous Picatinny rail on the handguard.

• Magazine Capacity: 10-shot tube magazine (comes with 10 silver shells designed specifically for the .22 caliber version).

View fullsize

Handling & How It Works: Weighing in at 6.5 pounds and measuring 38.5 inches long, the Barra 1866 Tactical has an incredibly solid feel thanks to its heavy metal receiver and barrel. This is a single-action lever action repeater, meaning you must manually cycle the lever to cock the hammer and load a shell into the breach for every shot. To fire, you load the individual shells into the tube magazine, rack the paracord-wrapped lever downwards to chamber a round, ensure the lever is squeezed snug against the stock to disengage the secondary safety, and pull the metal trigger. When you rack the lever again, the empty shell ejects straight out the top of the action just like the real deal.

View fullsize

Pros:

• Excellent heavy weight and realistic feel thanks to the nearly all-metal construction.

• The sleek black synthetic stock and M-LOK handguard completely update the classic platform into a modern tactical rifle.

• Very few replica rifles are available in .22 caliber, which offers fantastic downrange energy and impact.

• Abundant mounting options: M-LOK slots and multiple Picatinny rails make it incredibly easy to add red dots, flashlights, lasers, or bipods.

• The custom paracord-wrapped lever handle looks great and improves grip comfort during cycling.

• Dual 12-gram CO2 system provides a very cost-effective power source with less cool-down effect than a single cartridge, allowing for extended shooting sessions.

• Operating the lever and watching the empty casings eject vertically makes this gun incredibly rewarding and fun to shoot.

• The claimed 450 fps gives you plenty of power for mid-range target shooting and small pest control.

View fullsize

Cons:

• Because the empty shells eject vertically straight out of the top, you cannot easily mount a traditional magnified rifle scope directly over the receiver; an offset red dot or long eye-relief pistol scope mounted further forward is required.

• You will inevitably lose some of the ejecting shells if you shoot outdoors in the grass, so picking up a spare set is highly recommended.

• The lever must be held firmly snug against the stock while shooting, otherwise the built-in secondary safety will prevent the trigger from pulling.

View fullsize

If you are looking for a fun, realistic lever-action repeater that combines nostalgic shell-ejecting operation with modern tactical accessory compatibility, the Barra 1866 Tactical is a fantastic option. Stay tuned for the Field Test Shooting video coming up shortly.

Available at:

🇨🇦 Buy the Barra 1866 Tactical in the Canada Replica Airguns Store

🇺🇸 Buy the Barra 1866 in the US Replica Airguns Store

View fullsize

Getting a mystery box from the Canadian Replica Airguns warehouse feels a lot like Christmas and we are getting closer to Christmas... Today's unboxing was a tall package, and while it contained some excellent accessories, including Gear Stock 6mm airsoft BBs, a UV-activated Airsoft tracer unit, and a LiPo safety bag—the real highlights were two very distinct lever-action rifles.

Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle

The first rifle out of the box is the Barra 1866 Tactical CO2 Edition. It takes the classic 1866 lever-action platform and gives it a highly modular, modernized upgrade.

Initial Thoughts & Basic Specs:

• Ammunition & Power: This model is a .22 caliber pellet rifle that runs on a dual CO2 system housed in the back.

• Realistic Operation: It features a fully functional shell-ejecting system and includes ten metallic shells.

• Smooth Action: Operating the lever action on this rifle feels incredibly smooth.

• Tactical Upgrades: The tactical design includes top and bottom Picatinny rails and an octagonal barrel.

• Sighting: The rifle comes with a front sight and a versatile rear sight that functions as a notch or flips up into a peep sight.

View fullsize

Daisy 499B Match Grade Champion Lever Action BB Rifle

The second rifle is the Daisy 499B Match Grade Champion, famously billed as the world's most accurate BB gun. It feels essentially like a highly enhanced Daisy Red Ryder on steroids.

Initial Thoughts & Basic Specs:

• Premium Build: This is a full-sized rifle featuring a beautiful, fully wooden stock and forend. It is noticeably longer and more robust than a standard Red Ryder.

• Action: The metal lever produces a heavy, satisfying clunk when cocked during a dry fire.

• Competition Sights: Built for precision, it utilizes a front peep sight and a very small rear peep sight.

• Extras: A heavy-duty shooting sling is included in the box.

• Target Audience: While it is a fantastic platform for younger shooters, its larger size and premium quality make it highly suitable for older youths and adults.

I am incredibly excited to put both of these lever actions to the test. I will be producing full tabletop and field test shooting videos for both rifles very soon, so stay tuned.

View fullsize

Today I am testing out the Crosman 2240XL Special Edition here in the Sea Can indoor shooting range. It is getting a bit colder and raining outside, but the Sea Can is sitting at a comfortable 19 to 22 degrees Celsius, providing a great baseline environment for testing a fresh CO2 cartridge. If you haven't already, be sure to check out the dedicated Table Top Review for all the specifications and build details on this model. For this field test, our focus is entirely on performance: running it through the chronograph for real-world velocity and testing the downrange accuracy.

Chronograph & Velocity Performance For the velocity baseline, I used a brand new CO2 cartridge and loaded up some heavier .22 caliber Crosman Premier Hollow Points, which sit around the 14 to 15-grain mark. Crosman claims around 460 FPS on the box, but keep in mind that is typically achieved using the lightest possible ammunition.

Here is how the 5-shot string performed through the chronograph:

• Shot 1: 329 FPS

• Shot 2: 330 FPS

• Shot 3: 337 FPS

• Shot 4: 335 FPS

• Shot 5: 335 FPS

View fullsize

The Crosman 2240XL Special Edition settled in nicely around a 333 FPS average. Because this is a bolt-action setup rather than a fast-firing semi-auto, the CO2 doesn't cool down too rapidly between shots, which helps keep the velocity remarkably consistent across the string.

Downrange Accuracy & Target Testing Moving over to the accuracy test, I set up a fresh paper target 30 feet downrange. For this setup, I decided to mount a bit of a monstrosity of a 4x optical magnification scope using the dovetail mounts, which I pulled right off another gun just for this test.

I took about 9 shots from a rested position on the table. The first two shots were close together, but the grouping eventually opened up to about 2 inches, including one major flyer that I definitely didn't feel like I pulled. Honestly, I wasn't super impressed with this particular grouping. The 2240 platform is famous for its accuracy, so this spread might be down to a few different factors: potential nicks on the pellets during loading, the cheap optical sight I attached, or just user error while trying to stabilize it.

View fullsize

Handling Notes & Optics Fitment One of the absolute highlights of the Crosman 2240XL Special Edition is the trigger. It has a very nice, light, and short pull with essentially zero break required. However, shooting a pistol with a magnified scope from a rested position proved to be awkward. Trying to pull a pistol-length platform close to your face for proper eye relief (using a rifle scope rather than a pistol scope) can make everything feel quite shaky.

If you plan on running a larger optic like this, I highly recommend adding a shoulder stock to help stabilize the gun. Alternatively, swapping the massive scope out for a compact red dot or sticking to standard pistol sights would make this much more comfortable to shoot in its stock pistol form.

Final Thoughts The Crosman 2240XL remains an incredibly highly modifiable platform, fitting right in with the various pumper and .177 caliber variants available on the market. While my grouping today wasn't the tightest, the potential of this gun is massive once you dial in the right optics, ammo, and perhaps a stock for better stability.

Where to Buy

• 🇨🇦 Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• 🇺🇸 Buy Pellet Pistols in the US

View fullsize

Welcome back to Replica Airguns. I get asked all the time about which airguns hit the hardest, but a lot of people focus on the wrong attributes. They often look strictly at velocity instead of the raw energy and blunt force required for different tasks.

In this guide, we are breaking down the four main types of airgun ammunition: Airsoft, steel BBs, lead pellets, and rubber balls. The goal is to show you exactly what each ammo type excels at and where they fall short so you can choose the right tool for your specific needs.

View fullsize

6mm Airsoft: Safe Training and Plinking

Airsoft guns fire 6mm round balls, which are generally made of plastic, though you can find copper or zinc-coated variants. Because these are some of the lightest projectiles, ranging from 0.20 to 0.45 grams, they have the lowest overall energy and often lower velocities.

• Best For: Airsoft is ideal for force-on-force skirmishes (with proper eye protection) because the lightweight rounds sting but do not penetrate the skin.

• Practical Uses: They are great for safe indoor garage shooting without the risk of breaking windows, or for humanely chasing nuisance crows or vermin out of your yard without causing them permanent harm.

• Platform Tech: Heavier airsoft rounds utilize backspin, or "hop-up", to float straight through the air for better accuracy, and they are typically fired from highly realistic, full-blowback gas or CO2 replica pistols. Most rifle Airsoft guns are AEG’s using a battery and spring setup which allows for easy semi and full auto operation.

• Worst For: These are entirely ineffective for pest control (extermination) or any scenario requiring deep penetration or high impact energy.

View fullsize

4.5mm Steel BBs: Fast-Action Shooting

Steel BBs are 4.5mm in diameter, which translates to a .177 caliber round ball. Weighing in at approximately 5.3 grains, they are much denser than Airsoft rounds.

• Best For: Steel BBs are fantastic for fast-action plinking, breaking glass bottles, and tearing up pop cans.

• Platform Features: These are often used in 1-to-1 replica blowback pistols with drop-out full size magazines, giving shooters an authentic firearm feel for tactical manipulation practice.

• The Dangers: Steel does not deform upon impact, meaning these BBs are highly prone to dangerous ricochets if you shoot at hard surfaces indoors or up close.

• Worst For: Steel BBs lack the blunt force for home defense and are unethical for pest control as trey are a bit under powered and generally not as accurate as similar pellet guns.

View fullsize

Lead Pellets (.177 and .22 Caliber): Precision and Pests

Unlike round BBs, pellets are designed to be fired through a rifled barrel. Common sizes include .177 caliber (4.5mm, weighing 5 to 10 grains) and the much heavier .22 caliber (5.5mm, weighing 12 to 16 grains).

• Best For: The soft lead engages the spiral grooves in a rifled barrel, providing unmatched precision and accuracy.

• Terminal Ballistics: Because lead is soft, it expands and flattens upon impact, transferring its heavy kinetic energy directly into the target.

• Practical Uses: This improved energy transfer makes pellets the ethical choice for small pest control.

• Worst For: Pellet platforms are rarely designed as rapid-fire action shooters; they typically utilize slower single-shot (bolt actions) or rotary magazines that can require a bit of trigger finger strength to shoot quickly.

View fullsize

Rubber Balls (.43, .50, and .68 Caliber): Less-Lethal Blunt Force

This category represents the heavy hitters, firing massive projectiles that range from soft sponge rubber to dense steel-core balls, dust balls, and pepper balls.

• The Power Factor: A .68 caliber home defense marker can produce upwards of 20-50 Joules (or roughly 15-35 foot-pounds) of energy with dedicated home defense styled Rubber Ball Guns.

• Best For: The .68 caliber and high-powered .50 caliber options are explicitly designed for less-lethal home defense.

• How They Work: Instead of penetrating, these massive projectiles dump incredible raw energy and blunt force directly onto the target, effectively stopping threats through extreme pain.

• Training Options: The smaller .43 caliber variants are frequently chambered in realistic blowback replica pistols, making them excellent for tactical and paintball-style force-on-force training.

At the end of the day, picking the right Airgun comes down to matching the ammunition mass and energy to your target. You can find all the gear discussed here, from Airsoft replicas to less-lethal launchers, at the Replica Airguns Canada and US stores. Make sure you are subscribed to our channels across Rumble, YouTube, Vimeo, Instagram, X and Facebook for more detailed reviews and field tests.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

In this table top review, we are taking a close look at the Crosman 2240XL Special Edition, a .22 Caliber CO2 Pellet Pistol. While I haven't shot this exact model yet, I have shot the standard 2240 non-XL version, and they share a very similar firing mechanism. The biggest draw to the XL version is the factory-upgraded metal breech with an 11mm dovetail rail, and the threaded muzzle for added versatility.

View fullsize

Key Specifications:

• Model: Crosman 2240XL Special Edition

• Type: Pellet Pistol

• Caliber: .22 caliber lead pellets

• Power Source: 12-gram CO2 (1 cartridge)

• Velocity: Up to 460 FPS

• Action: Single-Shot Bolt Action

• Safety: Cross-Bolt Safety

• Barrel: Rifled Steel Barrel, Threaded muzzle (1/2" x 20 threads)

• Stock/Grips: Plastic grips

• Construction: Mostly metal (steel breech, barrel, loading chamber) with plastic grips

• Weight: 1.8 lbs

• Overall Length: 12.5 inches

• Sights: None included

• Optics Rail: 11mm Dovetail Rail

View fullsize

First Impressions & Build Quality:
The 2240XL brings a much-needed factory upgrade to the legendary 2240 platform: a full steel breech. This alone is a huge addition, making the gun stand out and providing a much higher quality feel. The gun is almost entirely metal, including the barrel, CO2 loading chamber, bolt, and breech. The grips are plastic, which is fairly standard, but one of the best things about the Crosman 2240 platform is how highly customizable it is. There are countless aftermarket parts available, and you can even easily swap out the grips fro wood grips or for a Crosman shoulder stock to turn it into a backpacker-style carbine.

Weighing in at 1.8 pounds and measuring 12.5 inches long, The Crosman 2240XL Special Edition has a solid feel in the hand. The threaded barrel comes with a thread protector and gives you options for adding mock suppressors or other attachments.

View fullsize

How It Works:
This is a single-action, bolt-action pellet pistol. To operate it, you must first cock the bolt and manually load a .22 caliber pellet into the chamber. Once the bolt is pushed forward and locked down, the trigger is engaged and ready to fire. Powered by a single 12-gram CO2 cartridge housed in the lower tube, it is capable of firing up to 460 FPS depending on the weight of the pellets used. Because it's a single-shot bolt action, you'll need to manually load a pellet for every shot, but you won't need to pump it since the CO2 provides the power.

View fullsize

Pros:

• Upgraded steel breech from the factory provides a robust build and premium look.

• Built-in 11mm dovetail rail makes adding a red dot or magnified optic easy.

• Threaded muzzle (1/2" x 20 threads) with an included thread protector for attachments.

• Solid CO2 power at up to 460 FPS.

• Highly customizable platform with endless aftermarket parts available.

• Excellent light single-action trigger with very little take-up.

• Mostly metal construction ensures long-lasting durability.

View fullsize

Cons:

• Does not come with any open sights, an optic is required out of the box.

• Relies on CO2, meaning velocities will fluctuate as the gun cools down during rapid fire and potentially as CO2 volume lowers.

• Standard plastic grips are somewhat basic.

View fullsize

Final Thoughts:
The Crosman 2240XL Special Edition takes an already proven pistol and adds the features most shooters end up buying aftermarket anyway. Having the steel breech and dovetail rail right out of the box makes mounting an optic straightforward, and the threaded muzzle is a fantastic touch, even if it’s just mainly for looks. If you're looking for a powerful .22 caliber airgun for small pest control that can be modified to your exact liking, the 2240XL is a superb starting point.

Stay tuned for the Field Test Shooting video coming up down the road.

Available at:

• 🇨🇦 Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• 🇺🇸 Buy Pellet Pistols in the US

We are halfway through September, and another unannounced delivery just showed up at the door. This box was surprisingly compact but incredibly dense, hinting at a hefty amount of possible ammunition inside. Cracking it open revealed a massive 4,000-count bottle of BBs and an updated classic from Crosman.

Gear Stock 4.5mm Copper-Coated Steel BBs

The sheer weight of this package came from a bulk 4,000-round bottle of Gear Stock 4.5mm steel BBs. These specific rounds feature a copper coating, which looks great but comes with a few historical caveats.

• Copper vs. Zinc: In my experience, copper-coated BBs can tarnish over time. Unlike zinc, which stays relatively clean, older copper coatings can oxidize and leave a dark, powdery residue on your hands and inside your airgun's barrel.

• Quality Check: If you burn through your ammo quickly, the tarnishing won't be an issue. We will have to see if modern manufacturing has improved the coating durability on this Gear Stock batch, but I typically lean toward zinc-coated BBs for long-term storage and cleaner shooting.

• Buy Gera Stock BB’s in Canada

• Buy Gear Stock BB’s in the US

View fullsize

The Crosman 2240 XL .22 Caliber CO2 Pellet Pistol

The main event in this box is the Crosman 2240 XL. The 2240 platform has been a staple in the airgun community for decades, and the XL version finally addresses the most common pain points shooters had with the base model out of the box.

• Core Specs: The 2240 XL is a CO2-powered, bolt-action, single-shot pistol chambered in .22 caliber. It weighs in at 1.8 pounds, features a rifled steel barrel, and utilizes a standard 12-gram CO2 cartridge.

• The Metal Breech Upgrade: The standard 2240 and its multi-pump cousin, the 1322, utilize a plastic breech. Mounting an optic on those older models requires clamp-on barrel adapter rings, which can easily twist out of alignment. The 2240 XL ships with an upgraded all-metal breech featuring a milled 11mm dovetail rail, allowing for a rock-solid red dot or scope mount straight from the factory.

• Threaded Muzzle: The front of the barrel has a threaded muzzle cap. You can unscrew the tip to attach 1/2" UNF aftermarket compensators or moderators, adding another layer of customization.

• Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• Buy Pellet Pistols in the US

View fullsize

Customization and Practical Application

Because the 2240 XL features a dovetail rail instead of iron sights, it is built specifically for optics. This plays perfectly into the massive aftermarket support for Crosman’s 22xx and 13xx platforms.

I own a heavily modified "backpacker" setup on one of my personal Crosman .22s, featuring a skeletonized rear shoulder stock and a magnified scope. At sub-500 FPS, a .22 caliber pellet is highly effective for close-range pest control. When dealing with nuisance animals like crows attacking songbirds, an ultra-high-velocity pellet will often pass straight through the target, wasting its kinetic energy. A heavier .22 pellet moving at moderate speeds dumps its full energy upon impact, providing a much more immediate and humane dispatch.

The full tabletop and field test shooting videos for the Crosman 2240 XL are coming up next. Make sure you are subscribed on Rumble, Vimeo, X, Threads, or TikTok to catch the full performance breakdown when it goes live.

View fullsize

Welcome back for another indoor field test shooting review! Today I am testing out the Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle. I have already completed the dedicated Table Top Review where I covered specifications, build details, features, and an up-close look at the gun, so definitely check that out if you want the full hardware overview. For this video and field test, however, our focus is strictly on performance: putting it through the chronograph to find out its real-world velocity, running a 10-shot semi-auto accuracy test on paper, and finishing off with a full-auto mag dump downrange.

Chronograph & Velocity Performance

For our velocity baseline, I tested the Specna Arms SA-E10 PDW using 0.25g Airsoft BBs. While you can achieve higher numbers using lighter 0.20g BBs, 0.25g BBs generally provide a better balance of velocity, stability, and downrange consistency, making them ideal for both chronograph testing and target grouping.

Here is how the 5-shot string performed through the chronograph:

• Shot 1: 341 FPS

• Shot 2: 331 FPS

• Shot 3: 333 FPS

• Shot 4: 335 FPS

• Shot 5: 330 FPS

The rifle settled comfortably in the 330 to 341 FPS range (averaging 334 FPS). For an ultra-compact PDW running 0.25g BBs, that is right where you want it to be for close-quarters engagement and indoor skirmishing.

Downrange Accuracy & Target Testing

Moving over to the accuracy test, I placed a fresh paper target downrange. During the initial sight-in shots of the Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle, the rifle was hitting slightly low, so I adjusted my hold to aim at the top outer ring of the target to bring the grouping closer to the center bullseye.

• Semi-Auto Target Test (10 Rounds): Firing 10 carefully paced rounds in semi-auto yielded an impressive grouping right around 1.25 inches (just slightly over an inch). Once compensating with the top-ring hold, the rounds grouped tightly together.

• Full-Auto Mag Dump: Switching the selector switch over to full-auto, I dumped the remainder of the magazine downrange. The spread naturally opened up a bit under rapid fire to roughly 3 inches, which is completely expected in full-auto and it tore up the paper until the target backing actually gave way and fell off the backstop!

View fullsize

Handling Notes & Optics Fitment

A couple of notable observations from running this compact setup:

• Battery & Buffer Tube Setup: For this test, I had a larger battery that wouldn't slip cleanly into the compact buffer tube compartment, so I removed the buffer tube to fit the pack. While a bit improvised, having the rear stock available with the rail setup allowed for a stable cheek rest and solid shooting consistency.

• Stock Length & Sight Picture: Because this is an ultra-compact PDW, the overall length of pull is quite short. The rear flip-up peep sight sits very close to your eye, which can make the rear aperture appear large and blurry when focusing forward.

• Optics Recommendation: While the included flip-up iron sights are fully adjustable and get the job done, this platform would truly shine with a compact red dot sight mounted slightly further forward along the top Picatinny rail. You could easily keep the flip-up sights as backup iron sights if your red dot battery gave out.

• Magazines: The rifle conveniently ships with two magazines (roughly 120 rounds each), giving you 240 rounds right out of the box ready to hit the field.

Final Thoughts

The Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle is a fantastic, compact AEG rifle. It delivers great looks, solid build feel, consistent velocity suited for CQB, and tight 1.25-inch semi-auto groupings right out of the box. Aside from the shorter shoulder pull typical of PDW platforms, it performed reliably from start to finish.

Where to Buy

• Buy in the Canada Replica Airguns Store

• Buy AEG Airsoft Rifles in the US Replica Airguns Store

If you haven’t already, make sure to check us out and subscribe across our video and social channels including Rumble, YouTube, Vimeo, Facebook, X, and Instagram. We truly appreciate your support!

View fullsize

In this table top review, we’re taking a detailed look at the Specna Arms RRA SA-E10 PDW EDGE AEG Airsoft Rifle. This is not a shooting test, the field test shooting video will be coming up later, but this overview will cover all the specifications, build quality, close-up details, and pros and cons so you can see if this compact PDW platform is the right fit for your load-out.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: RRA SA-E10 PDW EDGE

• Platform: AR-15 / M16 Style (PDW Configuration)

• Caliber: 6mm Airsoft BB

• Action: Semi & Full Auto Selectable

• Trigger: Single Action Only (Electronic Switch Trigger)

• MOSFET / ETU: Factory Pre-installed GATE X-ASR 4th Gen MOSFET

• Magazine Capacity: Includes 2x Mid-Cap S-MAGs (125 rounds each)

• Velocity: ~375–390 FPS (Factory spring installed) / ~310–320 FPS (with included M90 spring)

• Weight: 5.1 lbs (2330 g)

• Total Length: 505 mm – 595 mm (Telescopic 4-position PDW stock)

• Inner Barrel: 160 mm (6.3 inches) / 6.03 mm Tight Bore Precision Barrel (Non-rifled)

• Muzzle Threading: 14mm CCW (with unique mock suppressor / flash hider)

• Gearbox: Reinforced ORION Version 2 Gearbox (Steel gears & 8mm ball bearings)

• Hop-Up: Rotary Style Adjustable Chamber

• Spring System: ESA™ Quick Spring Exchange System

• Construction: Full Metal Aluminum Alloy Receiver (Nano Coating) with Polymer Furniture

View fullsize

Build Quality & Design

The Specna Arms SA-E10 PDW EDGE features an exceptional full metal build with an aluminum alloy upper and lower receiver finished in a scratch-resistant Nano Coating. It is officially licensed by Rock River Arms and showcases crisp, deep laser-engraved trademarks across the receiver.

The rifle incorporates high-strength polymer furniture where appropriate (such as the pistol grip and sights) while keeping all major structural components, including the receiver, telescopic stock guide rods, partial buffer tube, and outer barrel assembly all solid metal.

View fullsize

Key Design Elements:

• Rock River Arms Licensing: Authentic deep-engraved receiver markings and unique serial number.

• PDW Stock: Telescoping 4-position wire stock with integrated buffer tube battery compartment.

• Front Quad Rail: Short 22mm RIS Picatinny handguard providing mounting space on top, bottom, and sides.

• QD Pistol Grip: Tool-free quick-access base plate for fast motor inspection and maintenance.

• Mock Suppressor / Muzzle Device: Aggressive front muzzle device mounted via standard 14mm CCW threading.

• Rotary Hop-Up: Accessible behind the dust cover by pulling back the metal charging handle.

View fullsize

Features Overview

• GATE X-ASR 4th Gen MOSFET: Protects internal trigger contacts, optimizes battery efficiency, speeds up trigger cycle response, and features built-in onboard diagnostics.

• ORION V2 Gearbox: Features a reinforced gearbox shell, steel gears, 8mm ball bearings, and polymer piston with full steel teeth for outstanding out-of-the-box durability.

• ESA™ Quick Spring Change System: Allows players to swap out the main spring in minutes without having to remove or open the gearbox.

• Mid-Cap S-MAGs: Ships standard with two 125-round mid-cap magazines, eliminating winding wheels and BB rattle during movement.

View fullsize

Included in the Box

• Specna Arms SA-E10 PDW EDGE AEG Airsoft Rifle

• 2x 125-round Mid-Cap S-MAG Magazines

• Additional M90 Low-Velocity Spring

• GATE X-ASR Diagnostic Card

• Detachable Vertical RIS Foregrip

• Deans-to-Tamiya Adapter

• Cleaning / Jamming Rod

• User Manual & Certificate Card

View fullsize

Pros:

• Outstanding build quality with full metal aluminum receiver and scratch-resistant Nano Coating.

• Officially licensed Rock River Arms deep-engraved markings.

• Pre-installed factory GATE X-ASR 4th Gen MOSFET for fast trigger response and battery protection.

• Upgraded reinforced ORION V2 Gearbox with steel gears and 8mm ball bearings.

• ESA™ quick spring change system makes swapping springs for indoor vs. outdoor play effortless.

• Includes two 125-round mid-cap S-MAGs and an extra M90 spring right out of the box.

• Tool-free QD pistol grip provides instant access to the motor.

• Extremely compact, maneuverable PDW layout with 22mm RIS rail mounting options.

• No orange tip on Canada Store versions.

Cons:

• PDW buffer tube battery compartment is very tight (requires a compact stick LiPo setup, approx. 12 x 17 x 75 mm max).

• Charging handle must be manually held back to access the rotary hop-up adjustment.

• Flip-up sights and fire selector switch are primarily polymer construction.

• Fire selector is right-hand oriented (non-ambidextrous).

View fullsize

Overall Impression & Availability

The Specna Arms RRA SA-E10 PDW EDGE is an outstanding, ultra-compact AEG that combines premium full-metal exterior construction with top-tier internal components. Between the factory GATE MOSFET, ORION reinforced gearbox, dual mid-cap magazines, and included M90 spring, it delivers high-end out-of-the-box CQB performance without requiring immediate aftermarket upgrades.

• Buy in the Canada Replica Airguns Store

• Buy AEG Airsoft Rifles in the US Replica Airguns Store

Stay tuned for our upcoming Field Test Shooting Review where we put the SA-E10 through chronograph and target accuracy testing!

We’ve got yet another box on the table today for our August Mystery Unboxing. It took a while to arrive, but it was absolutely worth the wait. We’re diving into four highly anticipated products across the BB, Pellet, and Airsoft categories.

Here is a quick first look at what’s hitting the review table soon!

View fullsize

Marksman Model 1018 .177 Caliber Air Pistol

First out of the box is the Marksman 1018. This is a very budget-friendly (around $50), 1911-inspired spring-actuated pistol. It features fiber-optic sights on the front and back, making it an excellent, quiet option for basement or backyard plinking. While it can technically shoot darts and bolts, we'll be sticking to BBs and pellets for our tests.

Basic Specifications:

• Action: Single-stroke spring piston

• Caliber: .177 Caliber (BBs and Pellets)

• Capacity: 18-shot internal BB reservoir

• Velocity: Up to 200 FPS

• Weight & Length: 1 lb / 9.0 inches

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

Next up is a beauty from Umarex, the Glock 17 Gen 5 MOS. If you love ultra-realistic replicas, this is it. It features a heavy full-metal slide spring, a recessed barrel, and classic white dot sights. The "MOS" means it comes ready with all the mounting plates you need to attach your favorite red dot sights. It runs on a full-size, drop-out 17-round metal magazine and utilizes a full blowback system for ultra realistic blowback operation.

Basic Specifications:

• Action: Semi-auto full blowback, single CO2 cartridge

• Caliber: 4.5mm (.177) steel BBs

• Capacity: 17-round drop-out metal magazine

• Velocity: Approximately 300 FPS

• Weight & Length: 1.5 lbs / 7.95 inches

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

I'm incredibly excited to finally do a proper field test on this one. This is a replacement for a previous model that had a leaky loading valve. This gas-operated, "Mares Leg" style lever-action rifle is heavily modernized. It features a gorgeous real wood stock, an enlarged lever loop, a Picatinny top rail, an M-LOK handguard for accessories, and a mock suppressor on the front.

Basic Specifications:

• Action: Gas Non-Blowback Lever Action (Green Gas)

• Caliber: 6mm Airsoft BBs

• Capacity: 25-round internal magazine

• Velocity: 360 - 390 FPS (with 0.20g BBs)

• Weight & Length: 3.7 lbs / 24.5 inches

View fullsize

Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle

Finally, we have an absolute powerhouse in a tiny package: the Specna Arms SA-E10 PDW. This is a super-compact AR-style AEG with a polymer-metal build and a telescopic stock. Specna Arms goes above and beyond with the box contents on this one. Along with the rifle, you get two S-MAG mid-cap magazines, an additional M90 drop-in spring to easily lower your FPS for indoor fields, a Deans adapter, and a vertical foregrip.

Basic Specifications:

• Action: Electric (AEG) with Pre-installed MOSFET

• Capacity: Includes two 125-round mid-cap S-MAG magazines

• Velocity: 375-390 FPS (Drops to ~310-320 FPS with included M90 spring)

• Length: Minimum 505 mm (approx. 19.8 inches)

• Inner Barrel: 160 mm precision 6.03mm barrel

Stay tuned to the Replica Airguns channel, as I'll be doing dedicated tabletop and field test shooting videos for all of these very soon.

View fullsize

Welcome back for another field test! Today I am taking the E&L AKN 75 AEG Airsoft Rifle out to the range to see what it can do. If you want a deep dive into the specifications, materials, and a close-up look at the hardware, make sure to watch our dedicated Table Top Review. For this video, however, I am focusing entirely on how this rifle performs when putting plastic to paper.

Velocity and Chronograph Performance

To get a baseline for power and consistency, I ran a string of shots through the chronograph using standard 0.25g Airsoft BBs. Here is how the E&L handled right out of the box:

• Shot 1: 360 FPS

• Shot 2: 358 FPS

• Shot 3: 358 FPS

• Shot 4: 358 FPS

• Shot 5: 358 FPS

The consistency on this AEG is outstanding. After a slightly higher first shot, it locked exactly onto 358 FPS for the remainder of the test string.

One major surprise during the chrono test was the trigger system. Out of the box, the E&L AKN 75 AEG Airsoft Rifle operates with a binary-style double trigger, meaning it fires a round when you pull the trigger, and a second round when you release it. This feature makes it incredibly easy to rattle off rapid, successive shots even while staying in semi-automatic mode.

View fullsize

Downrange Accuracy at 30 Feet

Moving on to the accuracy portion of the review, I set up a fresh paper target exactly 30 feet downrange.

• Semi-Automatic Testing: I fired 10 carefully aimed shots in semi-auto mode. The gun delivered an excellent 1.5-inch grouping. The cluster was perfectly centered left-to-right but landed slightly low on the paper. Because the rear sight was dialed down to its lowest notch, fixing this would simply be a matter of bumping up the sight elevation rather than adjusting the hop-up.

• Full-Automatic Testing: I flipped the selector switch and dumped the rest of the magazine. The rifle chugged right along with a distinct, heavy sound, effortlessly shredding the target without skipping a beat.

Build Notes and Battery Fitment

This is an incredibly authentic-feeling replica. The combination of the real wood front handguard and the stamped steel folding rear stock gives the gun a fantastic, realistic weight.

However, you will need to be mindful of your battery choices. The battery compartment underneath the top dust cover is extremely tight and requires a specific, small nunchuck-style battery to close properly. For the purpose of getting this test done, I actually left the dust cover off of the E&L AKN 75 AEG Airsoft Rifle to fit the battery we had on hand. It doesn't affect performance, but it's something to keep in mind when purchasing accessories.

Final Thoughts

The E&L AKN 75 is a rugged, beautiful AEG that backs up its authentic looks with rock-solid consistency and great accuracy on the range.

Where to Buy

• Canada: www.replicaairguns.ca/aks-74n-steel-wood-aeg-airsoft-rifle

• US: www.replicaairguns.us/airsoft-rifles

If you haven't already, please head over to our YouTube, Rumble, and Vimeo channels and hit that subscribe button. We are always working to build our video community back up, and we truly appreciate your support!

In this field test shooting review, we run the G&G PCC45 Pro AEG Airsoft Rifle through our standard range testing, covering raw velocity consistency on the chronograph and accuracy at a distance of 30 feet in both semi-automatic and full-automatic modes. If you are looking for all the technical details, specs, and a closer look at the build, make sure to check out our previously posted Table Top Review. Today, however, is all about real-world performance on the range.

Chronograph Testing

To establish a solid baseline for velocity and consistency, we tested the G&G PCC45 Pro using 0.25g Airsoft BBs. We put a string of rounds through the chronograph to see how it handles out of the box, and the results were impressively uniform:

• Shot 1: 334 FPS

• Shot 2: 334 FPS

• Shot 3: 337 FPS

• Shot 4: 335 FPS

• Shot 5: 334 FPS

Chronograph Verdict

The G&G PCC45 Pro demonstrated excellent consistency, hovering beautifully in the mid-330s with a tight 3 FPS variance across most shots. Averaging right around 335 FPS, this translates to very stable and predictable performance on the field. Keep in mind that because we conducted this test with slightly heavier 0.25g BBs for improved stability, you can expect the velocity to scale up perfectly to standard CQB-friendly limits if you switch to lighter 0.20g rounds.

Accuracy Testing

Moving over to the accuracy portion of our evaluation, we set up a fresh paper target downrange at our standard distance of 30 feet.

• Semi-Automatic Accuracy (10-Shot Group):

  Firing a 10-shot string in semi-automatic mode, the PCC45 Pro delivered a stellar performance. Getting a clear look downrange can be a bit tricky depending on your choice of eyewear, but dialing into the rear peep sight revealed that this rifle is a laser. Out of the box, the 10-shot string punched a remarkably tight 1-inch grouping right near the center. It leaned just a tiny bit low and slightly to the left of the absolute bullseye, but for an unmodified out-of-the-box rifle, that is an incredibly impressive group.

• Full-Automatic Accuracy (Burst Test):

  Switching the selector over to full-automatic "fun mode", we held down the trigger to unleash a heavy, continuous burst to see how much the spread would open up. The spring-fed magazine fed flawlessly, unloading what was left of the mag—likely a solid 90+ rounds, until the mechanical tone changed, signaling we were completely dry. Even under a heavy mag dump, the full-auto spread opened up to just over 2 inches. It chewed a massive, definitive hole right through the paper target, keeping the vast majority of the BBs tightly localized.

View fullsize

Sighting & Ergonomics Note

The built-in iron sights of the G&G PCC45 Pro AEG Airsoft Rifle perform great, featuring a nice, crisp rear peep sight. If you find your shots landing slightly off-center out of the box, the sights are fully adjustable; the rear sight handles windage adjustments (left/right) while the front sight can be moved up or down for elevation adjustments. That said, given the seamless top rail space, adding a premium red dot sight would make a fantastic addition to perfect your sight picture on this platform.

On a quick battery note, managing battery placement on some of these compact platforms can occasionally be a bit tricky out on the range, sometimes requiring a bit of trial and error with different form factors, like nunchuck-style packs, to find the perfect fit inside the tight compartments.

Final Thoughts & Availability

The G&G PCC45 Pro AEG Airsoft Rifle is an exceptionally capable performer. Whether you are a beginner looking for a high-tier primary or a seasoned player wanting a reliable CQB powerhouse, it delivers fantastic accuracy, dependable velocity consistency, and an absolute blast of a full-auto mode.

• Buy the G&G PCC45 Pro M-Lock Airsoft AEG SMG in Canada

• Buy similar AEG Airsoft rifle in the US

Please take a moment to head over to our YouTube channel and subscribe, we are working hard to build that video community up, and your support helps us out a ton!

View fullsize

In this field test shooting review, we run the G&G L85 Carbine AEG Airsoft Rifle through our standard range testing, covering raw velocity consistency on the chronograph and accuracy at a distance of 30 feet in both semi-automatic and full-automatic modes.

If you are looking for detailed specifications, internal details, or close-up styling footage, make sure to check out our comprehensive Table Top Review. Today, however, is all about real-world performance.

Chronograph Testing

We tested the G&G L85 Carbine using 0.25g Airsoft BBs, which are slightly heavier than standard 0.20g ammunition. We put five rounds through the chronograph to establish an average velocity:

• Shot 1: 329 FPS

• Shot 2: 329 FPS

• Shot 3: 328 FPS

• Shot 4: 327 FPS

• Shot 5: 328 FPS

• Shot 6: 328 FPS

Chronograph Verdict

The G&G L85 Carbine AEG Airsoft Rifle demonstrated outstanding consistency, hovering reliably between 327 and 329 FPS averaging 328 FPS. Because we utilized heavier 0.25g BBs for this benchmark, you can expect this rifle to comfortably shoot right around the 360 FPS mark when using standard 0.20g rounds.

This velocity output sits perfectly within Canada’s import requirements, which require a baseline velocity over 366 FPS. It provides an optimal balance for close-quarters battle (CQB) environments while retaining enough power to remain viable for mid-range outdoor field skirmishes.

Accuracy Testing

Moving over to the accuracy portion of our evaluation, we set up a fresh paper target downrange at a distance of 30 feet.

Semi-Automatic Accuracy (10-Shot Group)

Firing a 10-shot string in semi-automatic mode, the G&G L85 Carbine produced a tight, highly respectable 1.5 to 2-inch grouping. The grouping bias leaned slightly high and a bit to the left of the center bullseye, but the consistency from shot to shot was remarkably uniform.

Plaintext

                  [ Target Center ]
                         o
                        /
                       /  Slightly High & Left
                      v
               [ X X X X X ] 
               [  X X X X  ]  --> 1.5" - 2" Grouping

View fullsize

Full-Automatic Accuracy (Burst Test)

Switching over to full-automatic, we aimed slightly low on the paper target and held down the trigger to run through a heavy burst of approximately 50 to 70 rounds until the spring drive ran clear.

Despite a couple of skipped cycles due to the mid-cap magazine running low on ammunition toward the end of the burst, the rifle punched a solid, definitive hole right through the target. The overall full-auto spread expanded slightly but stayed locked within a very consistent 3 to 4-inch grouping.

Operating Impressions

The mechanical performance of the G&G L85 Carbine leaves a distinct impression:

• Rate of Fire: Powered by an 11.1V 3-cell LiPo battery, the rate of fire is snappy and crisp, delivering exactly the kind of aggressive output you want from a high-quality AEG.

• Tactile Feedback: While it doesn't feature a true hard-kicking blowback system, the internal cycling produces a noticeable "shoulder tap" sensation, offering a bit more mechanical feedback than a standard, sterile AEG platform.

• Acoustics: It is worth noting that this is a relatively loud rifle. The gearbox and motor produce a distinct, metallic rattle with every cycle. It sounds robust and mechanical, but it is certainly not a weapon designed for stealth operations.

• Trigger Pull: As an electric switch trigger typical of premium AEGs, the break is highly responsive with virtually no take-up, allowing for quick follow-up shots in semi-auto mode.

Final Thoughts & Availability

The G&G L85 Carbine AEG Airsoft Rifle is an exceptionally solid performer, validating its premium design with excellent velocity consistency and tight groupings on the range.

• Canada Customers: You can purchase this exact model directly through our Replica Airguns Canada Store.

• US Customers: Check out the Replica Airguns US Store for current inventory on this model or comparable bullpup airsoft alternatives.

For more technical reviews, articles, and field trials, head over to Replica Airguns. If you are watching this on an external platform, please head over to our YouTube channel, subscribe, and help us rebuild our video community. We have over a thousand classic review videos archived along with all of our newest releases.

In this field test, we put the Specna Arms SA-E04 AR15 AEG through its paces, focusing on its chronograph consistency and accuracy performance in both semi-automatic and full-automatic modes.

If you haven't already, be sure to check out the detailed table-top review where we cover the technical specifications, build quality, and close-up features of this highly affordable AR-styled Airsoft rifle.

Chronograph Testing

For this test, we utilized heavier 0.25g Airsoft BBs rather than standard 0.20g rounds.

• Shot 1: 363 FPS

• Shot 2: 362 FPS

• Shot 3: 363 FPS

• Shot 4: 363 FPS

• Shot 5: 362 FPS

Chronograph Verdict

The velocity consistency on this rifle is incredibly impressive, varying by only a single foot per second across consecutive shots. While 0.25g BBs clocked in around the 362–363 FPS mark, switching to standard 0.20g BBs will easily push this rifle well into the 400 FPS range.

Note on Compliance: The legal limit for an airsoft gun to be imported into Canada requires it to exceed 366 FPS with a 0.20g BB. Because this rifle clears that floor easily with heavier ammunition, it comfortably complies with Canadian import guidelines.

(Note: The SA-E04 includes an optional, lighter replacement spring in the box if you need to lower the velocity for local indoor CQB field limits).

Accuracy Testing

We set up a paper target at a distance of 30 feet to observe grouping behavior under a controlled, seated position.

View fullsize

Semi-Automatic Accuracy (10-Shot Group)

The initial 10-shot semi-automatic string produced a very respectable 1.5-inch grouping. The Specna Arms SA-E04 AR15 AEG grouped tightly and predictably, making it more than capable for indoor CQB fields or mid-range outdoor skirmishes.

Full-Automatic Accuracy (Burst Test)

Switching over to full-automatic, we sent a heavy volume of fire downrange (approx. 50 to 70 rounds). The mechanical grouping stayed reasonably tight at roughly 2 inches, though the placement shifted vertically.

Sight Alignment & Out-of-the-Box Adjustments

During the shooting test, the rifle consistently grouped low relative to the center mass of the target, striking about 8 to 9 inches below the point of aim.

Plaintext

[ Aim Point ]  -->  o (Top of Target)
                    |
                    | ~8-9 Inches Low
                    v
[ Impact Point ] --> X (Actual Grouping)

How to Correct It

Because the Specna Arms SA-E04 AR15 AEG shoots low out of the box, the iron sights require basic mechanical adjustment:

• To raise the point of impact, you must lower the front sight post.

• Lowering the front sight forces you to naturally elevate the barrel when aligning your sight picture, bringing the actual point of impact up to match your point of aim.

Alternatively, the top Picatinny rail makes it incredibly easy to bypass the stock iron sights entirely by mounting a red dot or optical sight.

Final Thoughts & Availability

For a bare-bones, budget-friendly Airsoft rifle, the Specna Arms SA-E04 is a durable, lightweight, and remarkably consistent performer. It offers out-of-the-box velocity stability that rivals much more expensive options, making it an excellent platform to build on.

• Canada Customers: You can find this model directly in our Replica Airguns Canada Store.

• US Customers: Check out the Replica Airguns US Store for available inventory on this model or similar AR15-styled airsoft alternatives.

Make sure to follow us across YouTube, Facebook, Instagram, and X (Twitter) to catch our latest reviews, articles, and video content. We are actively rebuilding our primary YouTube community, so your subscriptions and views go a long way!

View fullsize

Today, we are putting the Specna Arms SA-F249 to the test. If you haven't seen one yet, be sure to check out the detailed tabletop review and the outdoor shooting video I've already posted. Today, however, is all about the hard numbers. We are bringing it into the indoor sea can to check the chronograph performance and see what kind of accuracy we can squeeze out of this absolute beast on paper. Let's get right to it.

Chronograph Velocity Test

To start things off, I loaded up some quality 0.25g airsoft BBs to run through the chrony. This setup currently has a standard voltage adaptor, for the LED lighting system though my usual one died on me, so I’m running an adjustable voltage adapter.

After a brief, accidental full-auto burst (remember, this is a support weapon designed to lay down cover!), we dialed it in for some attempted single shots (super short trigger pulls) to get our baseline velocity readings.

Chronograph Results (0.25g BBs):

• Shot 1: 363 fps

• Shot 2: 364 fps

• Shot 3: 365 fps

• Shot 4: 362 fps

• Shot 5: 363 fps

• Shot 6: 365 fps

The consistency here is phenomenal. We are sitting right in that 363 to 365 fps sweet spot. For an AEG out of the box, seeing variance of only a couple of feet per second between shots is a testament to the internal air seal and overall build quality.

Full-Auto Accuracy Test

With the velocity dialed in, it was time to set up a paper target downrange. Because this is a sport based automatic weapon, there's no semi-auto selector that I could locate, it's meant to be fired in full auto, and that’s exactly how we tested it.

Instead of the massive 1500-round box magazine it comes with, I opted to run a standard AR-15 style magazine for this indoor test. I locked it in, aimed just below the center of the target, and let the spring unwind until the mag the spring could not push anymore Airsoft BB’’s out, dumping roughly 50 to 75 rounds in one continuous burst.

View fullsize

The Results: Absolutely incredible. For a full-auto dump of that size, you would normally expect the BBs to spray across the paper. a little bit Instead, the Specna Arms SA-F249 punched a jagged, blown-out hole right through the target, resulting in a remarkably tight 2-inch grouping.

To pump that many rounds into such a condensed area on full auto is outstanding. It proves that this gun isn't just about suppressing fire; it provides highly accurate, concentrated fire downrange.

Final Thoughts

The Specna Arms SA-F249 is an incredibly impressive piece of kit. It delivers laser-like consistency on the chronograph and lays down surprisingly tight groupings in full auto. If you are looking for a support weapon that doesn't compromise on accuracy, this one needs to be on your radar.

Where to Buy: If you want to pick one of these up for yourself, or check out our other gear, head over to our stores:

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

Thanks for tuning in and supporting the channel! Be sure to like, subscribe, and follow us for more reviews and shooting tests across YouTube, Rumble, Vimeo, Facebook, Twitter, and Instagram.

Take care, and we'll see you in the next one!

Despite a rocky start, my test with the Specna Arms SA-F249 machine gun did yield some eventual results. Initially, I set up multiple cameras (Three Sony Cameras, Insta360 X4, DJI Neo 2, Looki L1, Meta Ray-ban Gen 2) and planned a full-auto session aiming to empty the 1500-round magazine on a boat load of water filled cans. Unfortunately, the magazine’s feed malfunctioned, preventing the gun from firing as intended. Even so, I pivoted, swapping in an AR-15 magazine and still managed to get some satisfying shots on target. at the end of the video

It’s all part of the process: sometimes you get a lemon, but that doesn’t mean the day is totally lost. We did confirm that the gun itself works very well, and I hope to be revisiting this test with a new 1500 round magazine to give it a proper go. For now, at least we got a bit of action on those water-filled cans. Stay tuned for a follow-up, because I’m determined to show this LMG at its full potential!

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

View fullsize

The support weapon role in airsoft has always had a certain appeal, and the Specna Arms SA-F249 definitely delivers that intimidating LMG presence right out of the box. This massive AEG support rifle is styled after the legendary FN M249 platform and brings together high-capacity firepower, aggressive looks, and surprisingly good value for players wanting something beyond the typical AR-style airsoft rifle.

At first glance, the SA-F249 looks huge, but despite its size, it’s actually lighter than expected thanks to its reinforced polymer construction. Even so, it still feels substantial in the hands and gives off that true support weapon vibe the moment you shoulder it.

The version reviewed here comes equipped with the GATE X-ASR MOSFET system, a 1500-round auto-feeding electric box magazine, quick spring change capability, adjustable stock, integrated bipod, and multiple Picatinny rail sections for optics and accessories.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: SA-F249 Machine Gun AEG

• Platform Style: FN M249 Inspired Support Weapon

• Caliber: 6mm Airsoft BB

• Action: Electric Automatic (AEG)

• Magazine Capacity: 1500 Round Auto-Feeding Box Magazine

• FPS: Approximately 390 FPS

• Weight: 9.15 lbs / 4150g

• Length: 32–37 inches Adjustable

• Inner Barrel Length: 340mm

• Hop-Up: Adjustable Rotary Hop-Up

• Gearbox: Version 2 Gearbox

• MOSFET: GATE X-ASR Installed

• Threading: 14mm Counter-Clockwise

• Construction: Reinforced Polymer and Metal

• Battery Connector: Deans (Comes with adaptor)

• Battery & Charger: Not Included

View fullsize

First Impressions

One of the first things noticed during the review was how different some components appeared compared to other online reviews. Some reviewers mentioned metal rear stock components while others claimed certain barrel sections were plastic. On this specific version, the rear stock assembly was definitely polymer, while the outer barrel appeared to be metal.

This kind of variation is fairly common with airsoft manufacturers over time as revisions and production updates happen.

Even with the extensive use of polymer, the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle still looks impressive and feels well-balanced considering its overall size. The carry handle, outer barrel, and several internal components are metal, while much of the receiver, stock, and furniture use reinforced polymer to help reduce overall weight.

View fullsize

Electric Auto-Feeding Box Magazine

The standout feature on the SA-F249 is definitely the included 1500-round electric auto-feeding box magazine. This is what transforms the rifle into a true support platform capable of sustained suppressive fire during milsim games or outdoor skirmishes.

The magazine runs on AA batteries and includes three operating modes:

• Off

• Auto

• Sound Control

The “Auto” mode activates the winding mechanism whenever the trigger is pulled, while the “Sound Control” mode intelligently detects pitch changes from the gearbox to determine when BBs stop feeding, automatically rewinding the internal spring system as needed. It’s actually a pretty clever setup and adds a lot to the realism and usability of the rifle.

Another nice touch is that the SA-F249 remains compatible with standard M4-style AEG magazines, allowing emergency reloads if needed.

View fullsize

Build Quality and Construction

The reinforced polymer construction helps keep the SA-F249 from becoming excessively heavy, especially for extended gameplay sessions. While some players may prefer more metal components for realism, there are advantages to quality polymer construction as well.

Polymer can sometimes absorb impacts better than brittle zinc alloy “pot metal” components commonly found in lower-end airsoft guns. The lighter weight may also reduce stress during accidental drops.

That said, there are still some concerns about long-term durability in specific areas, especially considering the rifle’s size and weight. I feel certain parts like the bipod and rear stock would have benefited from additional metal reinforcement.

View fullsize

Quick Spring Change System

The SA-F249 also includes a quick spring change system for easier FPS adjustments. Accessing the spring requires removing the rear stock assembly by pushing out the rear pins.

While the feature itself is excellent, the review sample had extremely tight rear pins that required minor drilling of the polymer mounting holes to improve fitment. Once removed, however, spring access was relatively straightforward.

Field Role and Gameplay Potential

The Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle is clearly designed for players wanting to fill a support gunner role. The large magazine capacity, full-auto-only operation, integrated bipod, and intimidating LMG profile make it ideal for suppressive fire and milsim gameplay.

At roughly $400 Canadian, the SA-F249 also offers surprisingly solid value considering what’s included. Many mid-range AR-style AEGs can already approach the $200–$300 range, making the jump to a dedicated support weapon platform more reasonable than some players might expect.

View fullsize

Pros

• Super cool!

• High-capacity 1500 round auto feeding system.

• GATE X-ASR™ MOSFET improves trigger response and protects electronics.

• Quick spring change system allows for somewhat easy FPS tuning.

• Durable reinforced polymer and metal construction.

• Adjustable stock helps stability and comfort.

• Multiple rail sections for optics and accessories.

• LMG styling and handling make it ideal for support roles and milsim use.

• Compatible with M4 style magazines.

• Integrated bipod and carry handle add realism and functionality.

• Strong overall value for a support weapon platform.

View fullsize

Cons

• Large and heavy compared to standard AR style AEGs.

• Box magazine can be bulky and somewhat noisy.

• Battery and charger sold separately.

• Lots of plastic, may experience durability issues.

• Rear stock pin fit may require drilling out.

View fullsize

Final Thoughts

The Specna Arms SA-F249 Machine Gun AEG is a very cool support weapon platform that delivers a strong mix of realism, functionality, and affordability. It may not be perfect, and some players will likely wish for more metal construction, but overall it offers excellent value for anyone wanting to step into the LMG support role without spending a fortune.

The 1500-round auto-feeding system alone will make this thing a blast to use, and combined with the MOSFET, quick spring change system, adjustable stock, and M4 magazine compatibility, the SA-F249 brings a lot to the table for milsim and support gun enthusiasts alike.

A full field test shooting review should be especially interesting with this one.

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

View fullsize

In this table top review, we’re taking a detailed look at the Specna Arms SA-F04 Flex AEG Airsoft Rifle. This is not a shooting test, field testing will come later, but this overview will cover specifications, build quality, features, and overall pros and cons so you can decide if it’s a good fit for your needs.

I can say that right out of the box, this rifle offers a strong balance between price, performance, and features, especially for players looking for a lightweight AR-style platform with modern internals.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: SA-F04 Flex

• Platform: AR / M4 Style

• Caliber: 6mm Airsoft BB

• Action: Semi / Full Auto

• Magazine Capacity: ~380 rounds (high-cap, spring-fed with winder)

• Velocity: ~380 FPS (M120 spring installed)

• Weight: ~4.7 lbs (≈2.1 kg)

• Length: ~27–30 inches (adjustable stock)

• Inner Barrel: ~6.03mm tight bore

• Outer Barrel Length: 9 inches

• Threading: 14mm CCW

• Gearbox: Version 2

• Hop-Up: Rotary style (TDC Magnus)

• MOSFET / ETU: Yes (HAL system)

• Spring System: ESA Quick Change

• Battery Recommendation: 11.1V LiPo

• Construction: Reinforced Polymer receiver with metal components

View fullsize

Build Quality & Design

The SA-F04 Flex uses a reinforced polymer receiver for both upper and lower, keeping the weight down while still maintaining durability. Key stress components, such as the outer barrel, buffer tube, and controls—are metal where it matters most.

This approach results in a rifle that feels solid without being overly heavy. It’s a practical design choice, polymer absorbs impact better than cheaper pot metal, which can crack or chip under stress.

You also get:

• Ambidextrous selector switch

• Metal buffer tube

• M-LOK handguard with Picatinny rail

• Adjustable iron sights (windage & elevation)

• Multiple sling mount points

View fullsize

Features Overview

ESA Quick Spring Change System

Allows you to swap springs without full disassembly, useful for adjusting FPS for indoor vs outdoor play.

HAL ETU / MOSFET System

Improves trigger response, protects electronics, and allows programmable trigger settings.

Rotary Hop-Up (TDC Magnus)

Provides consistent BB trajectory and improved accuracy.

Version 2 Gearbox

A widely used, reliable platform with good upgrade compatibility.

View fullsize

Included in the Box

• SA-F04 Flex AEG Rifle

• High-cap 380-round magazine

• M90 spring (lower FPS option)

• Orange plastic flash hider (installed but also comes with metal black flash hider)

• Cleaning / jam rod

• HAL programming card

• Manual (QR code download)

• Stickers and packaging materials

View fullsize

Important Setup Note (Very Easy to Miss)

Before using the Specna Arms SA-F04 Flex AEG Airsoft Rifle, you must activate the trigger system:

• Connect battery

• Set to safe

• Hold trigger for ~5 seconds until you hear a beep

If you skip this step, the rifle will just beep three times and not fire, making it seem defective.

Performance (Initial Impressions)

With an 11.1V LiPo battery, the rifle delivers:

• Fast trigger response

• High rate of fire

• Smooth cycling

Lower voltage batteries will reduce rate of fire and responsiveness, which may be preferable for some players.

View fullsize

Pros

• Excellent price-to-performance ratio

• Lightweight but durable polymer build

• ESA quick spring change system

• MOSFET + programmable trigger (HAL ETU)

• Good internal components (V2 gearbox)

• High-cap magazine included (380 rounds)

• Fully adjustable stock and sights

• Strong customization options (AR platform compatibility)

Cons

• Polymer receiver may feel less “premium” to some users

• Battery space in buffer tube is limited (requires specific size battery)

• Does not come with battery or charger at the lower price

View fullsize

Overall Impression

The Specna Arms SA-F04 Flex AEG Airsoft Rifle is a well-rounded entry-to-mid-level AEG that doesn’t cut corners where it matters. You get modern electronics, solid internals, and strong usability at a price point that’s hard to beat.

It’s especially appealing for players who:

• Want AR-platform compatibility

• Prefer lighter rifles

• Need flexibility between indoor and outdoor play

• Value performance over full-metal aesthetics

View fullsize

Availability:

• Canada: ReplicaAirguns.ca

• USA: ReplicaAirguns.us

Final Thoughts

This is one of those rifles that hits a sweet spot between affordability, performance, and features. It may not have full-metal construction, but in real-world use, that’s not necessarily a downside, and in some cases, it’s actually an advantage.

Field testing will ultimately determine how it performs under real conditions, but based on this overview, it’s a solid option worth considering.

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

View fullsize

Specifications:

• Manufacturer: E&L

• Model: AKS-74N (Essential & Platinum Versions)

• Caliber: 6mm Airsoft BB

• Power Source: AEG (Electric)

• Fire Modes: Semi-Auto / Full-Auto

• Velocity: 350–400 FPS (0.20g BBs)

• Magazine Capacity: ~120 rounds (Mid-cap included)

• Weight: 6.5 – 7.8 lbs

• Length: ~28.9" (folded) / 36" (extended)

• Barrel: ~6.03mm Tight Bore Inner Barrel

• Gearbox: Version 3 Full Metal Gearbox

• Hop-Up: Adjustable

• Construction: Full Steel Receiver + Real Wood Furniture

• Stock: Side Folding Metal Stock

• Rail: AK Side Mount for Optics

• Battery Compatibility: Deans (adapter included for Tamiya)

First Impressions

Today we are taking a look at the E&L AKS-74N, a full steel and real wood AEG airsoft rifle that leans heavily toward realism and collector appeal.

This is not your typical polymer field gun. Right away, the weight, materials, and finish give it a very authentic AK feel. It closely mimics the real steel AK platform, both visually and in handling.

There are two versions available:

• Essential (2.0 version): Focused on reliability

• Platinum version (reviewed): Upgraded MOSFET electronics and enhanced internals for better trigger response and durability

The Platinum version also comes with upgraded presentation-style packaging, making it feel more like a premium product out of the box.

View fullsize

In the Box

• AKS-74N AEG Rifle

• 120-round Mid-Cap Magazine

• Deans to Tamiya Adapter

• Certificate (velocity & joules info)

• Instruction Manual

• Decorative metal medallion

• Small utility bottle

Note: Battery and charger are NOT included.

Walkthrough & Features:

Build Quality

The E&L AKS-74N features a full stamped steel receiver paired with real wood furniture, giving it an extremely authentic look and feel.

• No cheap pot metal here, this is solid, high-quality steel construction

• Real wood furniture adds to the realism but requires more care

• Weight and balance closely resemble a real AK platform

View fullsize

Stock & Handling

• Side-folding steel stock

• Folds down to under 30 inches for compact transport

• Locks securely in both folded and extended positions

This makes it suitable for both transport and tighter CQB-style environments.

Controls & Operation

• Selector switch: Safe / Full Auto / Semi Auto

• Adjustable iron sights (elevation adjustable front & rear)

• Standard AK-style magazine release

• Side-mounted optics rail for AK-compatible scopes

Internal Setup

• Version 3 full metal gearbox (proven and widely supported)

• Adjustable hop-up (accessible via charging handle or dust cover)

• Tight bore barrel (6.03mm) for improved consistency

The Platinum version includes a MOSFET, improving trigger response and electrical efficiency.

View fullsize

Battery Setup

• Uses Deans connector (adapter included)

• Requires stick-style battery to fit inside the receiver tube

• Compatible with:

  • 7.4V (2S) for moderate performance

  • 11.1V (3S) for higher rate of fire

Testing showed a very high rate of fire with an 11.1V battery.

Performance Expectations (Pre-Test)

Since this is a tabletop review, performance testing will be covered in a future field test.

Expected performance:

• 350–400 FPS range (ideal for general field use)

• High rate of fire, especially with 11.1V battery

• Tight bore barrel and hop-up should provide consistent accuracy

View fullsize

Pros

• Full steel construction (very realistic weight & feel)

• Real wood furniture (authentic look)

• Version 3 gearbox (reliable platform)

• Semi & full-auto capability

• Adjustable hop-up

• Folding stock for compact transport

• AK side rail for optics

• Strong FPS range for field use

• Deans connector with adapter included

• Excellent balance of realism and usability

Cons

• Heavier than polymer AEG rifles

• Battery and charger not included

• Real wood requires care (scratches, moisture)

• Higher price point

Pricing (At Time of Recording)

• Essential Version: ~$517 CAD

• Platinum Version: ~$849 CAD

View fullsize

Final Thoughts

If your priority is realism, the E&L AKS-74N is one of the closest AEG representations of an AK platform you can get.

The combination of:

• Full steel construction

• Real wood furniture

• Solid internal components

makes this rifle stand out from typical airsoft options.

While it comes at a premium price and requires separate battery/charger purchase, it delivers a high-end experience that collectors and serious players will appreciate.

For those looking for the most realistic AK-style AEG, this is a strong contender.

Where to Buy

• Canada: www.replicaairguns.ca/aks-74n-steel-wood-aeg-airsoft-rifle

• US: www.replicaairguns.us/airsoft-rifles