Before I get into this Field Test Video Review for the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol, make sure to watch my Table Top Video for it if you want information like Specifications and Details along with some more closer up video of it. The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol for some people will be a pretty entry level BB Pistol many might overlook but if you are simply looking for a Beretta 92 based Airsoft Pistol that is relatively inexpensive to buy and cheap to shoot. And if you don’t need quick semi auto shooting or anything ultra realistic, then the this Spring Airsoft Pistol could be an option for you.
In this video I test out the velocity, accuracy and I basic operation, so let’s get started with the velocity or fps portion of the testing. I loaded up the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol with a full 12 rounds of .12 gram Airsoft BB’s in the drop out magazine. I shot 5 rounds through my Chronograph hitting the following fps: 285, 288, 289, 292, 289, which averaged 289 fps. Umarex claims a velocity of up to 260 fps which I shot a bit over, but if you do plan on using more standard heavier .20 gram Airsoft BB’s, that numbers going to drop a bit perhaps in the mid or lower 200’s.
I then placed a brand new paper target on my backstop 30 feet down range and proceeded to shoot a full 12 round magazine into it using a semi rested shooting position, hands rested on a sand bag up front and sitting on a stool in the back. This generally gives me good stability while performing these field tests but there is always some human factor to take into consideration. I did not get a super impressive grouping, the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol likes to fling Airsoft BB’s around a bit resulting in around a 7 inch grouping. You can see the BB’s curl as they fly through the air. Using heavier Airsoft BB’s should help tighten up the grouping somewhat, but for all intents and purposes I did get all the shots onto my paper target which would represent a person’s mid section well. So if you were using this simple Airsoft Pistol for some fun war games with your friends, you would be able to hit a person easily from closer in ranges.
The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is really made for having some fun close range war games with your friends or even shooting pop cans I would say within 20 feet or so. It works pretty good overall with consistent velocity and predictable accuracy even if it is not super accurate. The fact that it is a clear gun makes it a lot less intimidating and for those with parents sitting on the fence about allowing their kids to get an Airsoft Gun, this one may nudge them into the more willing category. So it may come down to the simple fact that you can get this gun or no gun, if your parents are the limiting factor?
Trigger Pull: The single action only trigger pull on the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is actually pretty decent as all the work is mainly done cocking the hammer when you pull back the slide to preload the internal spring piston. There is about a half inch of take-up and then another quarter inch before you feel some tension on the trigger, and then about another quarter inch of pull where you can feel the pressure of the release. I would say overall it the weight is on the lighter side but the actual full length is long for a single action only trigger. There is no double action trigger so if you decock the hammer you can not shoot until the hammer has been cocked again.
Accuracy: I did quickly load up a 12 round magazine of Airsoft BB’s and give the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol a bit of a whirl to see what it shot and felt like. Airsoft BB’s did seem to get to the target fairly quickly, I did notice a few of them curve just a bit but they did all hit my paper target close to where I was aiming from 30 feet away. We will see how it shoots when I do make my Field Test Shooting Video for it down the road. I would say the 260 fps claimed velocity looks to be about right but again may actual Chronograph test will tell the true story.
Build Quality: The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is an almost all clear plastic built Airsfot Pistol with some scattered metal parts, like the the inner barrel, some springs and screws, and a chunk of metal in the magazine to give it some extra weight and balance. That said the actual fit and finish are good and it should hold up OK since an Airgun this light when dropped has very little mass which can protect it from damage in a fall or drop.
Realism: Again, being a mostly clear plastic Airsoft Pistol with an orange tip, makes this not so real looking as a Replica Airgun, but that is kind of the point here. It is realistic in terms of shape and design to that of a Beretta Mod. 92 FS but that’s about it, the weight is only about a quarter of the real steel version. The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is made as perhaps a first time Airsoft Pistol for a younger shooter that may have parents that don’t want them getting anything too realistic looking and potentially getting into trouble with it.
Pros:
Fairly low cost and comes with 500 Airsoft BB’s to get you shooting right away.
Full size drop size weighted magazine is nice.
All the parts feel pretty tight, does not feel overly cheap, has some metal parts where they are needed, barrel, springs, weigght in magazine.
Red dot on front sights helps with target acquisition.
No CO2 required, just your Airsoft BB’s.
Beretta licensing via Umarex.
Slide operates as it is required to cock the spring piston.
Hammer is actually operational, can be decocted.
Makes a good beginner pistol for someone getting into the hobby that may not want a gun that looks super realistic.
Not super realistic being clear and having a red tip, so parents may be more open to buying and using for younger shooters.
Cons:
It is on the light weight side.
Does have an orange tip.
Being a clear gun obviously takes away from the realism but that is the point of this gun so as not be confused with a real gun.
Loading is a bit finicky.
Comments:
There is a place for an Airsoft Pistol just like this. Something not too realistic but close enough to give a newer shooter an idea of what it might feel like to shoot a gun like this. The price of the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is reasonable to purchase and the cost to shoot it is low as you already have a bunch of Airsoft BB’s included, so you can get to blasting cans right away. The fact that you have to rack the slide with each shot means it will take a while to get through the initial 500 rounds that come with it, so again there is some cost saving with a setup like this. I think it makes an ideal first target Airsoft Pistol for younger shooters with concerned parents that may just get them into the hobby.
Type:Airsoft AEG Rifle. Manufacturer: Specna Arms. Model: SA-FX02 FLEX. Materials: Reinforced Polymer, Zinc Alloy, and Steel Construction. Weight: 4.7 pounds (2.1 kg). Total Length: 30-33 inches (76-84cm). Barrel Length: 12.5 inches (32cm). Barrel: Metal non-rifled. Propulsion: AEG. Action: Semi and full auto single action only programable trigger. Hop-up: Rotary adjustable hop-up via ejection port. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 270 round full size drop out 9mm style plastic magazine. FPS: 350-370.
Trigger Pull: The trigger on the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is typical of most AEG Airsfot rifles as it is essentially an off trigger that completes a circuit that signals the controller to use what every trigger programming has been setup by the user. What is unique with the Specna Arms SA-FX02 FLEX AEG Airsoft Rifles is the ability for the user to fully program the trigger with various semi and full auto setting, along with an adjustable trigger point and even a pre-cocking adjustment. Specna Arms does give you a plastic card that has all the setting listed to make programing easier.
Accuracy: I have not shot the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle or tested it out so far here in the Sea Can indoor shooting range, so I have no real idea in terms of accuracy or if it is close to the claimed 360 ish fps. I will be making a full dedicated Field Test Shooting Video for it shortly as soon as I am able to. This AEG Airsoft Rifle is specifically made for even advanced shooters so I would expect it to perform very well. Stay posted for that upcoming Field Test Shooting Video.
Build Quality: The Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is made to be a light weight and easy to cary Airsoft Rifle that will not break the bank, but still includes a lot of higher grade materials and parts internally like a Metal V2 Gearbox and MOSFET ETU. The outer skin is mostly plastic but it is fiber reenforced for added durability. You do get a 6.03mm precision inner barrel for increased accuracy along with other metal parts like the Picatinny Rails, Charging Handle, Bolt Release, Flash Hider, Assorted Pins, Rings and Screws.
Realism: The Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is built around an AR-15 (AR-9) based submachine gun (SMG). It is not built as a replica of any specific real steel model, but in terms of size and controls it operates much the same. It is lighter weight since the outer construction incorporates a lot of plastic but it still comes in at a decent weight for an SMG Airsoft Rifle.
Pros:
Affordable yet very high quality product for what you pay. Perfect for all types shooters.
Quality components throughout.
Customizable trigger settings for sensitivity and shooting modes.
Lots of color choices.
6 position rear stock.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Plastic parts are fiberglass reenforced making them very durable.
Quick release fully adjustable pop-up sights.
No orange tips on our Canada Store versions.
Lots of rial mounting options Picatinny rails top sides and bottom with M-LOCK.
Metal V2 Gearboxes with metal gears and mostly all metal parts inside.
Easy access to motor for any possible trouble shooting you may need to do.
Cons:
Lots of plastic on this Airsoft Rifle makes it a bit light weight.
Will need your own battery and charger setup.
You will need a very compact battery setup with most Specna Arms models
Comments:
The Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is specially built for beginners and more advanced users. How can this be? Well it is priced so someone getting into the hobby can afford it and see if this is something they might be interested in pursuing. Often times a first Airsoft Gun when priced lower is going to have a lot of compromises that can affect performance and use. With the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle, this is not the case. So why would a more advanced user want something like this? Maybe they have already invested a ton of money into their primary weapon, but want something a bit different, or even something they can beat up a bit and not feel bad about it. But they still want an Airsoft Rifle that performs. Well the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle kinda checks all those boxes. I hope I don’t eat my words when I make my Field Test Shooting Video so don’t let me down Specna Arms…
In this Field Test Shooting Video Review I test out the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol to find out what to expect in terms of velocity in fps, and accuracy shooting at a paper target setup 30 feet away. I have already made my Table Top review for this KJWorks Full Blowback Airsoft Pistol, so if you are interested in finding out the details specifications along with some nice 4k close up video, then make sure to watch my KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol Table Top Review located here.
As always, I install a brand new 12 gram CO2 cartridge and place five rounds through my chronograph using .20 gram Airstot BB’ s and average them out to see what the actual velocity is. I was able to achieve a five shot average of 349 fps. Consistency between each shot was very good, here are the actual velocities for all five shots: 348, 344, 346, 356, 351 fps. The temperate in the Replica Airguns Sea Can Shooting Range was right around 20 degrees Celsius or 68 degrees Fahrenheit. Keep in mind the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol does come with a barrel extension that when installed will increase the velocity to some degree but I did not test with it as most people will not use it anyway.
Moving on to the accuracy portion of the Field Test Shooting Video, I carefully placed 10 shots on a fresh paper target setup 30 feet away. My shooting position was fairly stable with me sitting on a stool in the back with my hands resting on a sand bag up front. this is not perfect, but it does give us a good idea of what we can expect in general. Seven of the ten shots all placed around 1.5 inches apart near the top of the target and slightly to the left with two shots shooting a little bit lower extending the grouping to about 2.5 inches. I did have one flyer come out of the tighter grouping even lower and to the left that did extend the grouping to about 4 inches in total. The KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol does not have adjustable sights but you could dial in the hop-up to perhaps lower or higher the shot placement depending on your shooting distance.
In terms of my shooting experience for the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it shot as expected with no issues and the blowback action is super snappy with a lot of simulated recoil feel to it. The single action trigger is not super light but light enough for sure to get well placed shots or faster paced action shots. Some Airguns just make you smile a little bit when you shoot them, and this one of those Airsoft guns. It does come in different color schemes, but I do like the tan version I was testing out in this video. If you are looking for a fairly classic Beretta M9A1 that is not too moderned out, then this version would be a good choice.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:M9A1 TBC. Materials: Mostly all Metal. Weight: 2.1 pounds (926 grams). Total Length: 9.25 inches (23.5cm) Barrel: 4 inches (10.2cm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SA & DA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 24 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is single and double action. When the hammer is back and it is in singe action, the trigger is short and light with about a quarter inch take-up before the release which is crisp and fairly light. You can decock the hammer and shoot in double action which does make the trigger pull much longer and a bit heavier but it is still very usable. There is also a semi cock-option where the hammer is partially cocked. This keeps the hammer off the firing pin and allows for a safer double action trigger pull.
Accuracy: So far I have not shot the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol or made my Field Test Shooting Video. I have shot lots of KJWorks Full Blowback Airsoft Pistols in the past and they have in general performed as expected. So I am confident when I get to the Field Test Shooting Video for the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it should perform well for me!
Build Quality: The KJWorks line of Airsoft Guns are known for their excellent build quality, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is another example of a well made Airsoft Pistol with lots of metal parts including the slide, frame, inner and outer barrel, magazine, trigger, safety, slide catch release, take down lever and magazine release. The only real plastic I can see is the grips, butt plate, and CO2 gas nozzle. Fit and finish is really good. There is just a little bit of slide wiggle, but all the mechanical parts work well.
Realism: Most Full Blowback Airsoft Pistols are built to be as close to a real steel pistol as possible with similar dimensions, weight and feel. The blowback action gives a Blowback Airsoft Pistol the required slide action to allow for chambering of an Airsoft BB along with the reseting of the hammer, so true single action shooting is possible. Other than shooting a real steel Beretta M9A1, the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol is as close as you can get to it. Holding this pistol in your hand, it would be hard to tell it is not the real deal.
Pros:
Pretty much all metal pistols with good weight to it.
Full heavy blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the Airsoft BB’s and CO2. (Can get Green Gas mags)
Comes with threaded outer barrel for adding a compensator or mock suppressor.
Comes with barrel extension for higher velocity shooting.
Easy to add accessories to under barrel picatinny rail.
White dot sights front and back.
Ambidextrous safeties.
Two toned tan and black finish looks good.
Field strip-able.
Cons:
Sight are non-adjustable.
Grips may be a bit wide for some small handed people.
Extended magazine makes it a bit bulkier.
You need an Allan key to adjust the Hop-up.
Comments:
The Beretta M9 is a classic Semi Auto Pistol that has been used in military and police for decades and has proven itself over time. I would say it is right up there with the classic 1911 as being recognized as a dependable and solid semi auto pistol. I still kind of prefer the 1911 but I’d take a Beretta M9A1 any day of the week. You really can’t go too wrong with the KJWorks M9A1 TBC CO2 Blowback Airsoft Pistol, it has it all… Almost all metal build, full blowback operation with both single and double action shooting options. You have a picatinny rail for adding accessories and easy to see white dot sights front and back. This is probably one of my favorite Beretta M9’s in terms of looks and features.
This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.
Let’s get into what I found in this most recent Mystery Box in order of appearance…
The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.
Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.
Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.
Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.
Type: BB PistolPellet Pistol. Manufacturer: Distributed by Crosman. Model: SNR357. Materials: Mostly metal, some plastic parts. Weight: 1.92 pound (871 grams). Total Length: 8.13 inches (20.65cm). Barrel: 3 inches (7.6cm) metal non-rifled. Propulsion: CO2. Action: Revolver single and double action. AmmunitionType: 4.5mm BB’s / .177 cal. pellets. AmmunitionCapacity: 6 round cylinder. FPS: Claimed 400.
Trigger Pull: The Crosman SNR357 CO2 Dual Ammo Revolver has both a single and double action trigger, meaning you can pre-cock the hammer and shoot in single action which has a light short trigger pull. Or you can simply shoot in double action by pulling the trigger when the hammer is down and the trigger will cock the hammer and also release it to fire the Revolver. In double action the trigger is noticeably longer and heavier than in single action as your trigger finger now has to do all the work for the action. Having both single and double action is nice as you can shoot in action rapid fire using the double action or slow down and shoot with more accuracy in single action.
Accuracy: I have not tested out this exact Crosman SNR357 CO2 Dual Ammo Revolver but I have reviewed several similar products from Dan Wesson which essentially are the exact same mechanical gun manufactured by Wingun for both ASG and Crosman. I will be making a new Field Test Video for the Crosman SNR357 in a week or two but you can take a look at my recent Field Test Video for the Dan Wesson 2.5 inch Gold version which is mechanically the same gun as the Crosman SNR357 CO2 Dual Ammo Revolver.
Build Quality: When it comes to the build of the Crosman SNR357 CO2 Dual Ammo Revolver, it is alsmot all metal other than mainly the grips and the CO2 tab as far as I can tell. It weighs in at nearly 2 pounds even for a more compact revolver so it feels very hefty in the hand. In similar Dan Wesson models there has been some concerns with the hammer feeling a bit sloppy but this has never caused any concern in terms of functionality. I also am not a fan of the way the grips slide back for access to the CO2 as they can come off and misalign when trying to put them back in place. Other than that this pistol is a solid well made revolver.
Realism: The Crosman SNR357 CO2 Dual Ammo Revolver is styled after a 357 type snub nosed revolver and looks for the most part true to scale and form. As this product design was one of the first shell loading revolvers back in the day, manufacturers had to use parts that where already available as in the CO2 valves which where at the time a bit longer than they can make now. Because of this, the area between the cylinder and the back the revolver is a bit long to accommodate the longer valves made at that time. This does distorts the gun a little bit but to be honest most people will not notice.
Pros:
Design has been around for a while now and so it is well tested.
A decent looking replica of a 357 type revolver.
Single and double action trigger allows for both action and more laid back and precise shooting ability.
400 claimed fps is more than adequate for plinking and action shooting.
Always fun loading up the 6 removable shells and placing them in the cylinder.
Fully adjustable sights for dead center shooting.
CO2 is fully well hidden inside the grips.
Can choose between shooting pellets or BB’s.
Cons:
Barrel is not recessed.
Area between cylinder and hammer is a bit long as it has to accommodate the CO2 valve.
Grip removal can be a bit finicky.
Comments: The Crosman SNR357 CO2 Dual Ammo Revolver is far from a new styled gun on the market, it’s been around for about a decade originally introduced main stream by ASG as their Dan Wesson 357. Being an older styled airgun means any issues it may have had are now for sure worked out so you know you are getting a solid and reliable Air Pistol here. If you are looking for an updated 357 then take a look at the Dan Wesson 715 series as some of the issues I have mentioned with the SNR357 are worked out on the newer style 357 Revolvers.
I have already reviewed several Crosman 357 Pellet/BB Revolvers in the past like the Crosman Vigilante which also has the ability to shoot both .177 caliber pellets and 4.5mm Steel BB’s, (Really they all are with the right magazine). With the Vigilante my pellet chronograph tests got similar results but with Steel BB’s the Crosman Vigilante did a lot better than my Crosman Triple Threat CO2 Dual Ammo Revolver using a similar 6 inch barrel. As expected both the Crosman Vigilante and the Crosman Triple Threat did about the same in terms of accuracy getting better results with pellets over Steel BB’s.
Starting with the velocity portion of my Indoor Field Test Shooting video, I placed a brand new 12 gram CO2 into the Crosman Triple Threat CO2 Dual Ammo Revolver and tested out some 7 grain .177 caliber Lead Pellets. I averaged 382 fps in what I would consider normal indoor temperature ranges so you can expect a bit higher velocities in warmer conditions. Moving on to 4.5mm 5.1 grain Steel BB’s, I averaged quite a bit lower velocity at 288 fps. I was surprise since it was almost 100 fps lower than the heavier 7 grain lead pellets. The logical reason for this is that lead Pellets fit the barrel much more snug, stoping any CO2 from getting around them which helps increase the velocity over Steel BB’s which are a hard metal and need to be slightly smaller in diameter and therefore do let some CO2 get by reducing the pressure behind them.
For the accuracy porting of the the Indoor Field Test I shot 10 rounds for my pellet magazine first and then 6 rounds for the BB magazine, simply because this is how many rounds each magazine holds… Makes sense right? Even with the pellet magazine holding 10 rounds over the BB magazine’s 6 rounds, the Pellet magazine was still able to get a much tighter grouping at around 1 inch over the BB target which was closer to 3 inches. BB’s seemed to really like to hook a bit with the Crosman Triple Threat CO2 Dual Ammo Revolver, so I would for sure go with pellets if accuracy is importatn to you. Both pellets and BB’s shot a little bit high and to the left from the bulls-eye but that can easily be adjusted with the fully adjustable rear sight.
The Crosman Triple Threat performed rather as expected and was not a big surprise other than the BB’s really having a much lower velocity this time around. It is clear to me that I would not waste my time shooting Steel BB’s unless this is all I had on hand as they where not only much slower but also a lot less accurate. Over time the steel BB’s could damage the rifled steel barrel effecting future pellet accuracy. The Crosman Triple Threat CO2 Dual Ammo Revolver offers a lot of options with ammo choice and barrel choice that alter it’s looks and even performance to some degree but if you want a Crosman 357 type CO2 Revolver than it for sure gives you the most flexibility.
Trigger Pull: The trigger pull on the Crosman Triple Threat CO2 Dual Ammo Revolver like pretty much all of the 357 type Crosman Revolvers is rather nice in single action with virtually zero take-up and it has a not too light weight with a predictable feel to it. In double action it does get much longer and heavier but still very usable. If you have larger thicker finger then you may want to start off in single action as the finger opening is a bit tight.
Accuracy: I have not specifically tested out the Crosman Triple Threat so far but I would be very surprised if it was any different than the standard Crosman 357 and the Crosman Vigilante I have already done Field Test Reviews for. Other than the shape of the outer barrel, both of these guns are virtually the same including the frame and the 6 inch barrels. Back in 2012 when I tested out the Crosman 357 I averaged around 400 fps using mid grain lead pellets and was able to get a 1 to 1.5 inch multi-shot grouping at 30 feet away from my paper target. I will be making an update Field Test Shooting Video so we will see if I can replicate these results with the standard Crosman 357 and Vigilante CO2 Pellet and BB Revolver.
Build Quality: The CCrosman Triple Threat CO2 Dual Ammo Revolver is a fairly basic pistol that incorporates a variety of length plastic outer barrels and inner steel barrels (3/6/8 inches), the grips are also plastic as expected and so are the magazines and sights. Most everything else is metal including the receiver, trigger and hammer. This line of Crosman 357 pistols has been around for decades so you can expect hours of fun and reliable shooting with their multi-barrel dual ammo version.
Realism: There are for sure a lot more realistic looking Replica Revolvers out there with swing out cylinders that eject the shells just like their real steel counterparts, but where the Crosman Triple Threat shines is in performance, reliability and consistency. You will get more shots per CO2, higher fps and better accuracy with the Crosman Triple Threat CO2 Pellet and BB Revolver over other more realistic Revolvers on the market.
Pros:
Inexpensive Pellet revolver with a proven track record that goes back decades.
Good usage of metal parts where you need them most. (Metal trigger, hammer, frame, barrel, CO2 Tab screw
Single and double action trigger for action and more focused shooting.
Excellent accuracy and good power with a reasonable amount of shots per CO2 (based on similar versions).
Fully adjustable rear sight.
Riffled steel barrels (All three of them).
3 different barrel choices (3/6/8 inches) depending on the look and how compact you want it to be.
CO2 and tab are nicely hidden and use all metal.
Come with both a Pellet and BB magazines..
Cons:
Outer barrels are plastic but very solid. Metal would have added a bit more weigth perhaps better balance?
Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.
Not your most real revolver out there in terms of replicas out there but probably more usable then most.
No white dots on the sights.
Comments: The Crosman Triple Threat CO2 Dual Ammo Revolver is basically another reskinned Crosman 357 at the end of the day with a ton of options including 3 different barrel lengths that will change the look, size and power depending on your needs. You also have the choice of what ammo you want to use, cheaper 4.5mm Steel BB’s or more accurate and even higher velocity lead pellets for greater downrange energy and precision. If you are not sure which Crosman 357 type revolver to get? The standard 357… the Vigilante or the Triple Threat, maybe go with the Triple Threat at the end of today as it offers the most options and variety of configurations.
I love making these Mystery Box Unboxing Videos as many of the items inside are actually real mysteries to me, some I may have an idea of but even these items are new to me so it’s fun to open them up and check them all out. In this October 2023 Mystery Box Video I checkout 9 items ranging from AEG Airsoft Rifles to Airsoft , BB and Pellet Pistols. There is even a new Steel BB product from Sig Sauer that is a compact rifle with a 3 round burst option when shooting.
This is not exclusive to Airguns since trends of Airguns are highly influenced by what type of Real Steel Pistols are popular to people. This is often based on what people see portrayed in movies and TV Series, and also promoted online. There is for sure an overlap in what is popular and it is hard to say what is influencing what? Is it the popularity of Pistols out in the real world that influences what we see being used in the movies and on TV? Or is it what we see in Movies and TV that influences our choices of pistols out in the real world? Perhaps it is a combination of both?
My list is based on my own personal experience and does not represent the entirety of types of Pistol designs available.
I have made a fair amount of video reviews for the Dan Wesson Line of AIrguns that encompass Table Top and Field Test Reviews on several versions of the Dan Wesson line: BB, Pellet, Airsoft, in a variety of barrel and color choices. It has been a while, so why not make another Review Video to revisit the Dan Wesson Line and so this time here we have the Steel BB version in a 2.5 inch barrel length. As always I will test they CO2 Revolver to find out what the velocity is and how accurate it is shooting at a paper target. Also make sure to watch my Table Top Video for specifications, details and closeup video.
Here we go with the Velocity test! I placed a brand new CO2 in the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver and shot a cylinder full of 4.5mm steel BB’s that weigh 5.1 grain through my Chronograph. The temperature was average so about room temperature. Only the last 4 of my shots registered on my Chronograph as it was acting up a bit on me at first two shots but I did manage to average 332 fps with the last four. The first two shots would have been a little bit faster had they registered on my chronograph so this may have brought up the average a bit to say around 334…
I then placed a fresh paper target 30 feet down range and proceeded to unload a full 6 round cylinder into it, I was shooting in single action with the hammer cocked back between shots. I was also using a semi rested shooting position with my hands resting on a sand bag up front and seated in the back for stability. Generally speaking even with Steel BB’s I can get close to a 1-2 inch grouping with hess Dan Wessons but this time my 6 shot grouping only produced a 3 inch group? It was probably me as there is always some human error involved and each test can result in different results so keep that in mind. The grouping was well centered out of the box but the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does have fully adjustable sights in case yours is a bit off.
It never get’s old loading up the shells with ammo and placing them in the cylinder followed by either quick action shooting or more relaxed and accurate single action shooting, then repeating again and again… The original Dan Wesson line of revelers has been around for a long time now and if I am not mistaken was the first Airgun revolver to use reloadable shells. We now have more refined 715 version of the Dan Wesson which does have some improvement but the original versions still hold strong and are very capable and fun shell loading revolvers that come it a bit lower price tag then the newer 715 versions so no matter which version you get you will have lot of fun shooting and reloading these enjoyable Airguns!
Type: BB Revolvers. Manufacturer: ASG Model: Dan Wesson 2.5 inch Gold Materials: Mostly metal. Weight: 1.9 pounds. (862 grams) Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Revolver, single and double action. Ammunition Type: 4.5mm Steel BB's. Ammunition Capacity: 6 rounds (removable shells). FPS: 327
Trigger Pull: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver shoots in true modern revolver style offering single and double action. The double action has a bit of friction to it since the cylinder is being rotate during the first part of the trigger pull and there is a spring fed metal gasket between the barrel and the cylinder that creates a seal but does add some resistance to the trigger pull in double action. Single action is much lighter as expected since pulling the hammer back turns the cylinder removing that friction point from the equasion.
.Accuracy: So far I have not done my Filed Test Shooting Video for the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver, but I plan to in the near future as a revisit since I have made a lot of similar Field Test Videos for the Dan Wesson line of products in 4.5mm Steel BB and 6mm Airsoft, here is a link to me shooting the 8 inch a while back in my old setup. Wow, this one goes back to 2014 almost 10 years ago!
Build Quality: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver overall is really well built with good weight to it and a nice fit and finish, I do like the Gold version in this 2.5 inch version. It is almost all metal with the exception of the grips which are made of a semi hard plastic. One beef I have with the original ASG Dan Wesson line of revolvers are how the grips slide back to access the CO2, closing them can be a bit of a chore as they can come off their track super easily. The other complaint I hear about them is the play in the trigger and hammer side to side.
Realism: The ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver like all the other ASG Dan Wesson Revolvers is very realistic with its realistic pop out cylinder and 6 removable shells you can reuse and load up for numerous rounds of shooting. You can also buy additional shells and have them preloaded and ready to go in the Speed loader to speed things up. Two things about the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver that take away a bit from the realism would be the non recessed barrel and the rather large space in front of the hammer. A real steel Dan Wesson or even most revolvers do not have this large space. I believe they did this to allow for the internal valve system. The newer Dan Wesson 715 however was designed with a smaller space in front of the hammer.
Pros:
It's a revolver with actual shells! Gives you the feeling of a real 6 shooter.
Almost all metal design with good weight and feel.
Lots of detail in this gun, very well made, fit and finish is very good.
Good power and good accuracy. (going off of already done older reviews)
Fully adjustable rear sight for windage and elevation.
Can add the included accessory rail for more options (optical or red dot sight…).
Dan Wesson licensed via ASG.
Gold finish is unique. (Gold is the Best!)
Moulded and textured pistol grips.
Grips fully hide CO2 screw.
Can shoot in both double and single action for action shooting or more accurate shot placement.
Cons:
Plastic CO2 screw tab.
Plastic grip setup can be a bit awkward to close.
2.5 inch does not have the recessed barrel.
Hammer and trigger are a bit sloppy compared to 715 version.
Comments:
It’s been a while since I reviewed one of the first generation ASG Dan Wesson Revolvers and the ASG Dan Wesson 2.5 inch Gold CO2 BB Revolver does bring back some memories for me going back almost a decade. If I’m not mistaken this revolver was the first one to implement actual removable and reloadable shells making Airgun Replica Revolvers a lot more interesting and realistic! I do kind of prefer the newer 715 version as they are even beefier than the original ASG Dan Wessons and ASG has fixed the sloppy hammer and trigger along with the space in front of the hammer has been reduce making the 715 even that much more realistic.
Watch my Vimeo Video Table Top Review for the Dan Wesson 2.5 Inch Gold BB Revolver:
Back in 2017 I made “Which Beretta Airgun is the Best” Video and showed off some 4.5mm Steel BB and .177 Caliber Pellet versions of my favorite Beretta 92 - M9 style Air Pistols. There have been some changes since then most noticeably the addition to Airsoft versions so I thought I would update this video with more current Beretta Airguns along with of course some of the same ones form my last video.
Because I show off 4.5mm Steel BB, .177 Caliber Pellet and 6mm Plastic Airsoft versions I decided to pick my favorites form each category. Watch my Vimeo Review Comparison Video so checkout these Air Pistols and see which ones are my favorites…
.177 Caliber Pellet Beretta 92 -M9 CO2 Air Pistols
In this Vimeo Replica Airguns Update Video I take a look at three CO2 Airguns, one is a 4.5mm Steel BB revolver distributed by Barra and two are CO2 Blowback Airsoft Pistols distributed by Umarex. All of these CO2 Airguns I have previously reviewed in slightly different versions either barrel length and finish or Steel BB as compared to 6mm Airsoft So checkout why other reviews on similar version Airguns.
The Barra Barra Schofield CO2 BB Revolver is a replica of the Schofield No. 3 single action revolver and utilizes 6 reloadable shells for a very realistic shooting experience. It is very solid in construction bing made mostly out of metal and weighs in at around 2.4 pounds. This version shots 4.5 mm Steel BBs at a velocity of up to 400 fps. It comes in a variety of barrel lengths and finishes so amen sure to have a look in our Online Replica Airguns Store for what we have available…
Next up from Umarex is the fully licensed Beretta Pietro Mod. 92 A1 CO2 Blowback Semi and Full Auto Airsoft Pistol, this product is distributed by Umarex but is made by KWC. Another solid metal pistol with a hefty 2.4 pound weigth that holds 21 rounds in its full size drop out metal magazine and offers both semi and full auto shooting at the flick of a switch!
Again from Umarex I showcase the Elite Force 1911 Tac CO2 Blowback Airsoft Pistol and like the Beretta Pietro it too is made in the KWC factory for Umarex. The 1911 Tac as the name suggest is a tactical version of the standard Colt 1911 but with some upgrades like a skeletonized hammer and trigger along with an ambidextrous safety, white dot sights front and back and a picatinny rail on the frame for add ons. You can expect velocity to be somewhere in the 400 fps range and the full size drop out metal magazine holds 15 Airsoft BB’s.
In this Field Test Shooting Video I test out Crosman’s latest version to the 357 line of CO2 Revolvers and perform both my Velocity and Accuracy test using both .177 caliber Lead Pellets and 4.5mm Steel BB’s to see which ammo has better velocity/power and is most accurate. Also make sure to watch my Table Tope Video Review where I go ver specifications and features and show the Crosman Vigilante CO2 Pellet and BB Revolver up nice and close.
Starting with the velocity portion of my Indoor Field Test Shooting video I placed a brand new 12 gram CO2 into the Crosman Vigilante CO2 Pellet and BB Revolver and tested out some 7 grain .177 caliber Lead Pellets. I was able to average 389 fps in what I would consider normal indoor temperature ranges so you can expect a bit higher velocities in outdoor weather conditions. Moving on the 4.5mm 5.1 grain Steel BB’s, I averaged a bit lower at 360 fps which may seem confusing since the Steel BB’s are lighter than the Lead Pellets? The Lead Pellets fit the barrel much more snug stoping any CO2 from getting around them which helps increase the fps over the Steel BB’s which are a hard metal and need to be slightly smaller in diameter and therefore do let some CO2 get by reducing the pressure behind them.
For my accuracy porting of the the Indoor Field Test I was going to place 6 shots from each magazine into my paper target setup 30 feet down range but ended up using all 10 rounds for the pellet magazine, perhaps because I was just having too much fun :) Since the BB magazine only holds 6 rounds my shot grouping for BB’s only included 6 shots so keep that in mind for the final results. All said and done the Lead Pellets outperformed the Steel BB’s once again getting about a 1.5 inch grouping over the 2.5 inch grouping for the Steel BB’s. And I know the Crosman Vigilante CO2 Pellet and BB Revolver is more than capable of getting a .5 to 1 inch grouping from previous Field Tests I have made using similar 357 type Crosman Revolvers.
The Crosman Vigilante CO2 Pellet and BB Revolver is just one of those must have old school classic Air Pistols I think everyone should own at least some sort of version of. I do like the look of the Vigilante barrel with it’s more modern and aggressive design and functional top and bottom rails for adding on accessories. The ability to choose what ammo type you want to shoot is also a plus and the price point is bang on for a nice CO2 Air powered Revolver.
Type: Pellet & BB Revolver Manufacturer: Crosman Model:Vigilante Materials: Metal and Plastic. Weight: 2 pounds (908 grams). Barrel: 6 inches rifled. Length: 11.36 inches. Propulsion: CO2 x 1 Action: Revolve , single and double action trigger. Ammunition Type: 4.5mm Steel BB's / .177 caliber Pellets. Ammunition Capacity: 6-BB / 10-Pellet round rotary magazines. FPS: 465-BB’s / 435-Pellets.
Trigger Pull: The trigger pull on the Crosman Vigilante CO2 Pellet and BB Revolver is rather nice in single action with virtually zero take-up and it has a not too light weight with a predictable feel to it. In double action it does get much longer and heavier but still very usable. If you have larger thicker finger then you may want to start off in single action as the finger opening is a bit tight.
Accuracy: I have not specifically tested out the Crosman Vigilante CO2 Pellet and BB Revolver so far but I would be very surprised if it was any different than the standard Crosman 357 I tested back in 2012. Other than the shape of the outer barrel, both of these guns are virtually the same including the frame and the 6 inch barrels. Back in 2012 when I tested out the Crosman 357 I averaged 402 fps using 6.9 grain pellets and was able to get a 1 inch multi-shot grouping at 30 feet away from my paper target. Not sure if this was the entire 10 round mag or not? I will be making an update Field Test Shooting Video so we will see if I can replicate these results with the Crosman Vigilante CO2 Pellet and BB Revolver.
Build Quality: The Crosman Vigilante CO2 Pellet and BB Revolver is a fairly basic pistol that incorporates a plastic outer barrel and inner steel barrel, the grips are also plastic as expected and so are the magazines and sights. Most everything else is metal including the receiver, trigger and hammer. This line of Crosman 357 pistols has been around for decades so you can expect hours of fun and reliable shooting with it.
Realism: There are for sure a lot more realistic looking Revolvers out there with swing out cylinders that except shells just like their real steel counterparts but where the Crosman Vigilante CO2 Pellet and BB Revolver shines is in performance. You will get more shots per CO2, higher fps and better accuracy with the Crosman Vigilante CO2 Pellet and BB Revolver over other more realistic Revolvers on the market.
Pros:
Inexpensive Pellet revolver with a proven track record that goes back decades.
Good usage of metal parts where you need them most. (Metal trigger, hammer, frame, barrel, CO2 Tab screw
Single and double action trigger for action and more focused shooting.
Excellent accuracy and good power with a reasonable amount of shots per CO2.
Fully adjustable rear sight.
Can mount a bunch of accessories on the picatinny barrel top and bottom rails.
CO2 and CO2 tab are nicely hidden and use all metal.
Comes with both a Pellet and BB magazine.
Cons:
Outer barrel is plastic but very solid. Metal would have added a bit more weight and perhaps better balance?
Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.
Not your most realistic revolver in terms of replicas out there but I would say more usable than most.
No white dots on the sights.
The Crosman Vigilante CO2 Pellet and BB Revolver is basically a reskinned Crosman 357 at the end of the day but I have to say it is my favorite looking Crosman 357 out there with its aggressive barrel design. And the added bonus are the top and bottom Picatinny rails which make for mounting accessories like Red Dots, Lasers and Tac Lights super easy! if you’re looking for function over realism at a price point that is more than fair then pick yourself up one of the Crosman Vigilante’s from our Replica Airguns Store!
Type: GBB Airsoft Pistol. Manufacturer: WE Airsoft Model:1039 M2 Materials: Mostly all metal build. Weight: 2.43 pounds (1100 grams). Barrel: 4.53 inches, non-rifled. Length: 8.5 inches. Propulsion: Green Gas Action: Semi & full Auto, single and double action trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 26 round full size dropout metal magazine. FPS: 366+.
Trigger Pull: The trigger pull on the WE M92 GBB Full Auto Airsoft Pistol is good in both single and double action. Double action as expected has the longer heavier pull but is still smooth and fairly light with a predictable release. Single action shooting has a much shorter trigger pull with a bit of take-up and an even lighter release than in double action shooting mode.
Accuracy: This is one of those times I actually performed my Field Test Portion of my Review first so I do have some feedback in terms of the accuracy and velocity for the WE M92 GBB Full Auto Airsoft Pistol. WE claims an fps of around 366+ using the extended barrel that comes with it so this is how I tested it. I did use .26 gram airsoft BB’s so the fps was a bit lower but I did get close to 320 fps, So you should expect around a 20% increase in FPS using .20 gram Airsoft BB’s, so closer to 360-380 fps. In terms of accuracy I did notice that the WE M92 GBB Full Auto Airsoft Pistol shot rather low for me, as much as 8 inches at 30 feet out, perhaps adjustment get hop-up will fix that, at longer ranges it should… That said I found I was able to get around a 1-5.2 inch 10 round grouping at 30 feet out. In terms of full auto, all I can say is don’t expect to hit very much you point at as the gun really likes to rock around!
Build Quality: The WE M92 GBB Full Auto Airsoft Pistol is a really gorgeous looking pistol and has one of my favorite looking finishes in that stainless steel look. You will find it has an overall solid build quality, it is virtually all metal with only the grips and some internal parts like the gas chamber and nozzle being plastic. There is almost zero slide wiggle and all in all this Airsoft pistol performed great for me with no mechanical problems.
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the WE M92 GBB Full Auto Airsoft Pistol is no exception! All mechanical parts work as intended and you can easily field strip the WE M92 GBB Full Auto Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that WE Airsoft color matched the magazine rather than simply shipping it with the black magazine as I have found some other companies do.
Pros:
All metal pistol with good weight to it.
Crisp firm full blowback operation.
Excellent fit and finish.
No markings on the metal parts at all, just the WE branding on the grips.
Color matching magazine.
Gun will accept real Beretta M9 grips.
Semi and full auto selector safety switch.
White dot sights front and back.
Good fps, right around the claimed 366 using .20 gram Airsoft BB’s.
Very believable working replica of the real steel Beretta M9 Pistol.
Fully field strip-able.
Comes with extension barrel and replaceable inner barrel if not going to use extension.
Cons:
No marking on the gun if that is important to you?
Shot rather low in my testing but hop-up and barrel change may fix it.
Almost unusable in Full Auto mode.
The WE M92 GBB Full Auto Airsoft Pistol is one of the nicer looking Airsoft Beretta M9 pistols on the market and is comparable in quality to other higher end brands like KWA and KJWorks. The price point is also in line with what you are getting. I really like the Stainless - Silver - Chrome finish or what ever you want to call it… One thing I was not able to determine 100% is if this version is in fact the Gen 2 version but I do believe it is given that it has the black gas tube in it. We just don’t have it advertised as such. If you’re in the market for a Beretta style M9 Pistol then consider the WE M92 GBB Full Auto Airsoft Pistol as a solid choice.
I haven’t reviewed many WE products over the years as they where not part of our inventory in the Replica Airguns Store. The good news is we do carry a selection of their pistols in our Canada Store including the WE 1039 M92 GBB Full Auto Airsoft Pistol I review in this video along with some 1911’s. In this Field Test Shooting Video I test out the WE 1039 M92 GBB Full Auto Airsoft Pistol in the Replica Airguns Sea Can Indoor Shooting Range to find out what the real world velocity and accuracy is.
Starting with the velocity portion of the test I place 6 rounds through my Chronograph using .25 gram Airsoft BB’s and I averaged 317 fps which is about right considering the claimed fps is 366+ using .20 gram Airsoft BB’s. The temperature was also not overly hot or cold in the Sea Can so in warner shooting conditions the fps will up a bit too.
Next I performed my accuracy test where i generally shoot 10 rounds on a paper target for 30 feet back ling a rested shooting position, sand bag up front and sensated in the back. I found the WE 1039 M92 GBB Full Auto Airsoft Pistol was shooting a good 6-8 inches low at this range with the default hop-up setup so I had to aim near the top of my target to place rounds closer to the bullseye for the sake of the video. I would say the WE 1039 M92 GBB Full Auto Airsoft Pistol is capable of 1-2 inch 10 rod groupings, my test was closer to 2 inches but I can see potential for sub 2 inch groups. A quick hop-up adjustment should bring the aim point closer to where the rounds are actually hitting. I did perform a full auto mag dump and the WE 1039 M92 GBB Full Auto Airsoft Pistol was able to get through all 26 rounds with a full mag of gas but as expected accuracy was not very goo dat all as the heavy blowback action really throws this gun around.
All in all the WE 1039 M92 GBB Full Auto Airsoft Pistol is a really nice Airsoft pistol that performs fairly well and in a game situation would get the job done nicely. It’s also a real looker with it’s stainless looking finish. Keep posted for my Table Top Video I will be making shortly for the WE 1039 M92 GBB Full Auto Airsoft Pistol.
Perhaps you might call this a followup video since I already made a full Field Test Shooting Video of the all black version of this pistol and you may wonder if the color of a gun could in some way effect how it performs? Well I don’t think color would really matter but it has been over 6 years since I did my original Field Test Shooting video fo the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver and so perhaps some things have changed, maybe my shooting is better or worse? At any rate let’s find out.
Starting off with my Chronograph test I was able to get an average 6 shot velocity of 348 fps which is about 40 fps less than my testing 6 years ago of 390 fps, perhaps the temperatures where a bit different? Perhaps the valve setups of the guns was not the same? By the way the temperature was 23 degrees Celsius in the indoor Airgun Sea Can Shooting Range and I was using a brand new 12 gram CO2 along with 5.1 grain zinc coated steel BB’s.
Moving on to the accuracy test, surely I would get a similar 1 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver, after all it’s been 6 years and I must be a much more advanced shooter… Well there again the Chrome Umarex Colt Python 357 Magnum CO2 BB Revolver did not perform as well as the black one from my 2014 Field Test? Again maybe the steel BB’s I was using where not of the same quality? Maybe I simply had one too many espresso shots? As the video shows this time around I was only able to get about a 2 inch 6 shot grouping from the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver. Still not bad but I was hoping for better result or at least the same as before.
I could do this test again and get completely different results using perhaps another brand of CO2 on a warmer day with higher quality Steel BB’s and just maybe with me on my game a little bit better? At the end of the day 350 fps is perfectly fine for putting holes in pop cans and a 2 inch group at 30 feet will get you on most targets every time so I’m not going to sweat it too much. If you are looking for a shell loading CO2 BB Revolver the Umarex Colt Python 357 Magnum Chrome CO2 BB Revolver is for sure one of my top picks.
