View fullsize

In this table top review, we’re taking a look at the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol, part of Umarex’s T4E (Training for Engagement) lineup. This version is marketed more as a tactical training pistol, while its nearly identical counterpart, the HDP50, is positioned toward home defense.

At first glance, the TP50 and HDP50 look almost identical. The main visual difference is that the TP50 comes in an all-black finish, while the HDP50 features an orange slide. Beyond that, the functionality, performance, and specs are essentially the same.

Key Features and Specifications

• Manufacturer: Umarex

• Model: T4E TP50 Gen 2

• Caliber: .50 caliber

• Power Source: 12g CO2 (quick piercing system)

• Action: Semi-auto, double action trigger

• Magazine Capacity: 6 rounds (internal inline magazine)

• Velocity: Rated up to 465 FPS

• Energy: Claimed 11 joules (can be higher depending on ammo)

• Barrel Length: ~4 inches

• Overall Length: ~8 inches

• Weight: ~1.5 lbs (0.7 kg)

• Construction: Polymer frame and slide with metal internals and barrel

• Safety: Integrated trigger safety

• Rail: Under-barrel Picatinny rail

• Sights: Fiber optic front and rear

View fullsize

Overview and First Impressions

The TP50 Gen 2 is a compact, .50 caliber paintball-style pistol designed for training, recreational shooting, and less-lethal applications. It has a solid feel in the hand, not too heavy, not too light, and resembles a full-size handgun profile, similar in size to a large-frame pistol.

Despite its polymer exterior, the internal components that matter, especially around the CO2 system—are metal, giving it durability where needed.

CO2 System (Quick Piercing Feature)

One of the standout features is the quick piercing CO2 system:

• Insert the CO2 cartridge (butt-first)

• Tighten the cap until snug

• When ready to use, give the bottom a firm “whack”

• A pin pops out on the back where you can see it to indicate the system is pressurized

This allows you to keep the pistol loaded but not activated, which is useful for storage or readiness situations.

View fullsize

Ammo Compatibility

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol supports a wide range of .50 caliber ammunition, including:

• Rubber balls

• Powder balls

• Paintballs

• Steel/rubber hybrid balls

• Pepper balls (limited availability in Canada)

Performance varies significantly depending on the weight of the projectile:

• Lighter rubber balls: ~450 FPS / ~13–15 joules

• Heavier projectiles: lower energy (down to ~7–11 joules)

View fullsize

What’s Included

• TP50 Gen 2 pistol

• Two tubes of 10 rounds each (powder + rubber balls)

• Barrel cleaning squeegee

• Instruction manual

• Cardboard packaging (blue “tactical pistol” branding)

View fullsize

Walkaround Highlights

• Fiber optic sights make target acquisition easy in various lighting conditions

• Textured grip and slide for solid handling

• Metal trigger with integrated safety

• Wide open barrel design

• Picatinny rail for adding lights or lasers

• Clear “Strike” marking for CO2 activation point

Overall, it’s a clean, functional design with a tactical look, especially in the all-black version.

View fullsize

Pros

• Compact size compared to other .50 cal pistols

• Wide variety of compatible ammo types

• Quick piercing CO2 system (very practical)

• Good power for its size (~11–15 joules range)

• Fiber optic sights improve usability

• Picatinny rail for accessories

• Realistic all-black tactical appearance

Cons

• Only 6-round capacity before reload

• Limited shots per CO2 (~3–4 reloads)

• Internal magazine (no quick mag swaps)

• Pepper ball ammo difficult to source in Canada

• Efficiency trades off for higher power

TP50 vs HDP50 (Quick Comparison)

• TP50: All black, marketed as tactical training

• HDP50: Orange slide, marketed for home defense

• Performance: Essentially identical

View fullsize

This difference is largely cosmetic and marketing-driven, so choosing between them comes down to preference and intended use.

Final Thoughts

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol is a solid, compact .50 caliber CO2 pistol that delivers respectable power in a manageable platform. It’s not designed for high-capacity shooting or efficiency, but rather for impact, simplicity, and versatility in ammo choice.

If you’re looking for a less-lethal option or a training pistol with realistic handling and solid performance, the TP50 fits that role well, especially if you prefer the more discreet all-black tactical look.

Where to Buy

• 🇨🇦 Buy the T4E TP50 in Canada: ReplicaAirguns.ca

• 🇨🇦 Buy the T4E HDP50 in Canada: ReplicaAirguns.ca

View fullsize

In this table top review, we’re taking a close look at the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This model fits into a long lineage of classic lever-action BB rifles, alongside well-known options like the Daisy Red Ryder and the Marlin variants from Crosman and Umarex. These rifles all share a similar concept, simple, spring-powered, lever-action BB guns designed for training, plinking, and beginner shooters, but each brings its own subtle differences in materials, styling, and features.

Key Specifications

• Model: Air Venturi Annie Oakley Lil’ Sure Shot

• Type: Lever Action Spring Piston BB Rifle

• Caliber: 4.5mm Steel BB

• Power Source: Spring (No CO2 Required)

• Velocity: Up to 350 FPS

• Magazine Capacity: 550 Round Internal Reservoir (Gravity Fed)

• Action: Lever Action

• Safety: Cross Bolt Safety

• Barrel: Smoothbore

• Stock: Stained Solid Wood

• Construction: Primarily Metal with Some Plastic Components

• Weight: Approx. 3.3 lbs

• Overall Length: ~36.25 inches

• Optics Rail: Removable Weaver/Picatinny Style Mount

First Impressions & Build Quality

The Annie Oakley Lil’ Sure Shot stands out with its classic Western styling, enhanced by engraved Annie Oakley branding on the wood stock. It’s a step above many entry-level BB rifles thanks to its real wood stock and metal lever, giving it a more authentic and durable feel compared to fully plastic alternatives.

Most of the rifle is metal and wood, though there are a few plastic components:

• Trigger

• Front sight (on the newer version)

• Adjustable portion of the rear sight

• Removable scope rail

Overall, it feels solid in the hands, lightweight, and well-balanced, especially for younger shooters or anyone new to lever-action rifles.

View fullsize

How It Works

This is a spring-piston, lever-action BB rifle, meaning:

• No CO2 or gas is required

• Each shot is powered by cocking the lever

• BBs are stored in a large internal reservoir

• You must tilt the rifle upward to gravity-feed BBs into position

With a 550-round capacity, you can shoot for quite a while before needing to reload, your arm will likely get tired before you run out of ammo.

Handling & Usability

This rifle is clearly designed with accessibility in mind:

• Lightweight (3.3 lbs) makes it easy to handle

• Shorter length and pull fits smaller shooters well

• Moderate cocking effort is manageable for beginners

• Lever action slows firing rate, adding a safety advantage for new users

Rifles like this are excellent for training because:

• They are easier to aim than pistols

• They encourage controlled shooting

• They are not overly powerful

Even for experienced shooters, these are simply fun and inexpensive for backyard plinking.

Sights & Optics

Out of the box, the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle includes:

• Fixed front sight (plastic on newer version)

• Adjustable rear sight (elevation only)

One notable feature is the removable Weaver-style rail, allowing you to:

• Mount a red dot or scope

• Or remove it for a more traditional look

Keep in mind the rail is plastic, so care should be taken when mounting optics.

View fullsize

Comparison to Similar BB Rifles

This rifle sits in the same category as:

• Daisy Red Ryder – The original classic

• Umarex Marlin Lever Action – Slightly more adult-oriented design

• Crosman Marlin (older models) – Direct Red Ryder competitor

All of these:

• Use lever-action spring systems

• Have internal BB reservoirs

• Shoot in the ~300–350 FPS range

The Annie Oakley version distinguishes itself with:

• Better visual styling

• Wood and metal construction

• Optional optics mounting

New vs Older Annie Oakley Version (Key Differences)

If you come across different versions, here are the main distinctions:

Newer Version:

• Longer barrel

• Plastic front sight

• Larger loading port (easier to load)

• Metal Lever

• Brighter, more polished wood finish

View fullsize

Older Version:

• Shorter barrel

• Metal front loading system (rotating port)

• Metal front sight (more durable)

• Plastic Lever

• Slightly darker, more matte wood

Both should perform similarly, but the newer version is a bit more refined with that quality all metal lever.

Pros

• Lightweight and easy to handle

• Real wood stock and metal lever construction

• Large 550-round capacity

• No CO2 required (low maintenance and inexpensive to shoot)

• Removable optics rail for flexibility

• Classic Western styling with Annie Oakley branding

• Great for beginners and younger shooters

Cons

• Plastic front sight (new version)

• Lower power compared to CO2 rifles

• Rear sight only adjustable for elevation

• Slightly higher price than some entry-level similar BB rifles

• Less realistic than shell-ejecting lever-action models

Final Thoughts

The Air Venturi Annie Oakley Lil’ Sure Shot is a well-built, visually appealing lever-action BB rifle that blends classic styling with modern usability.

It’s ideal for:

• Beginners and younger shooters

• Backyard plinking

• Anyone wanting a simple, reliable and fun BB rifle

While it doesn’t aim for full realism like higher-end shell-ejecting models, it delivers where it matters, ease of use, affordability, durability, and fun factor.

Available at:

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

Also check out ReplicaAirguns.com for additional articles, photos, and video reviews.

In this Table Top Review we’re taking a close look at the Sig Sauer P229 CO2 Blowback Pellet Pistol. This is the tabletop portion only, no shooting in this review as my Field Test Shooting Video will follow later on.

If you’re familiar with the Sig Sauer ASP P226 platform, the P229 version is the same general system in a more compact package, with one major upgrade: it’s optics-ready!

View fullsize

Specifications

• Manufacturer: SIG SAUER

• Power Source: 12g CO2

• Ammunition: .177 pellets (also supports steel BBs)

• Action: Semi-auto, blowback

• Trigger: DA/SA (double action / single action)

• Magazine: 16 rounds (twin 8-shot rotary clips, loaded on both ends)

• Barrel: Rifled inner barrel

• Sights: White dot sights

• Safety: Manual safety lever with de-cocker function

• Claimed Velocity: up to ~380 fps (real-world varies with temperature and cadence)

• Shots per CO2: roughly 50–60 (varies with temperature/cadence)

• Weight: 35.2 oz / 1.0 kg (2.2 lb)

• Overall Length: 7.7 in (P229)

• Optics: optics-ready slide / SIG AIR reflex-sight mounting provision

• Muzzle threads: M14x1 CCW

View fullsize

In the Box

• P229 CO2 blowback pellet pistol

• Manual

• Sight/plate parts for the SIG AIR reflex mounting setup (for red dot use)

P226 vs P229 - What’s Different?

These two share the same general operating system (CO2 blowback, DA/SA, rotary-mag that works with pellets/BBs), but the P229 version changes a few important things:

View fullsize

Key Differences

• Size: P229 is shorter (7.7 in) vs P226 (8.25 in).

• Weight: P229 is lighter (35.2 oz / 2.2 lb) vs P226 (~39.1 oz).

• Optics: P229 is optics-ready (SIG AIR reflex mounting provision); P226 platform is typically not.

• Muzzle threads: P229 uses M14x1 CCW (P226 commonly uses a different thread direction/size).

Bottom line: if you liked how the P226 handled and performed, the P229 should feel very familiar, just more compact, with the bonus of being set up for a dot.

Walk-Around & Handling

The P229 has that classic SIG profile and a very “real pistol” feel in the hand, helped by the mostly-metal build and full weight.

View fullsize

Notable features and controls:

• DA/SA trigger system: long/heavier first pull in double-action, then lighter single-action after the slide cycles.

• Safety + de-cocker lever: functions like the real-steel concept — you can decock the hammer and run it DA/SA.

• Accessory rail: for a light/laser (training-style setup).

• Optics-ready slide: set up to accept the SIG AIR reflex-style mounting system (sight sold separately).

CO2 System and Magazine Notes

One of the standout features on this platform is SIG’s cam-lever, tool-less CO2 loading system, designed to make cartridge swaps quick and easy.

The magazine is a 16-shot design using twin 8-shot rotary clips. Practical tip: make sure pellets are seated properly in the rotary clip so they don’t hang up during cycling.

View fullsize

Pros

• Mostly metal build with realistic weight and solid feel

• Compact P229 size (shorter than the P226)

• DA/SA trigger + functional safety/de-cocker system

• Blowback action for realism/training value

• Rifled inner barrel (pellet accuracy potential)

• Tool-less cam-lever CO2 loading system

• Optics-ready slide (big upgrade over older-style setups)

• Accessory rail for light/laser

Cons

• Fixed/non-adjustable sights

• CO2 performance is temperature + cadence sensitive (rapid fire cools the system and drops power)

• No last-round hold-open on this style of rotary-mag system

• Rotary clips require good pellet seating to avoid occasional feeding issues

View fullsize

Final Thoughts

The Sig Sauer P229 blowback pellet pistol is a very “SIG-like” training/plinking platform: realistic controls, DA/SA operation, snappy blowback, and a compact duty-pistol footprint. The biggest tabletop takeaway is the optics-ready slide, which makes this version feel more modern than older CO2 pellet pistol designs.

Field test shooting (chronograph + accuracy) will follow in the next video.

Available in our Canada Replica Airguns Store. Also check out:

• Buy the Sig Sauer P229 in Canada

• Buy the Sig Sauer P226 in the US

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

This one’s really growing on me because it’s not your standard AR platform. We review a lot of AR-style rifles (and there’s nothing wrong with ARs, they’re popular for a reason), but this one has a very different vibe. It’s based on the SA80 British service rifle design and comes in a compact bullpup layout that gives you a long inner barrel without needing a long overall rifle.

Today’s Table Top Review is the G&G L85A2 (A2 version) ETU Airsoft AEG Rifle — and yes, a full Shooting / Field Test Video will be coming shortly. I definitely want to get this one out and properly test it.

This model is available in our Canada store. At the time of recording this review, it wasn’t available in the US store, but I’ll add an equivalent/similar US option (or a list of comparable AEG rifles) in the post links.

View fullsize

Specifications:

• Manufacturer / Distributor: G&G (Made in Taiwan)

• Replica Of: SA80 / L85A2 (British 5.56×45 NATO service rifle family)

• Platform: Airsoft AEG (Electric)

• Ammunition: 6mm plastic airsoft BBs

• Operation: AEG with simulated blowback (reciprocating bolt for a slight “tap” feel)

• Fire Modes: Semi / Full Auto (and programmable for 3-round burst via MOSFET programming)

• ETU System: Programmable MOSFET + Electronic Trigger Unit (ETU)

• Motor: High-torque motor (rated around 25,000 RPM)

• Gearbox / Internals: Full metal gearbox, heat-treated metal gear set

• Bushings: 8mm oilless bushings for smoother gear rotation

• Hop-Up: Adjustable hop-up (access via dust cover)

• Trigger: AEG electric trigger (single-action-only style in practical terms)

• Safety: Cross-bolt safety

• Sights: Metal, fully adjustable front & rear

  • Front: elevation

  • Rear: windage

  • Rear peep sight includes two aperture sizes

• Weight: 6.0 lbs (2.7 kg)

• Overall Length: 27.5 in (70 cm)

• Inner Barrel Length: 16 in (40.6 cm)

• Magazine: 450-round high-cap AR-style AEG magazine (AR/M4-style AEG mags should fit)

• Velocity: Approx. 370–400 FPS with 0.20g BBs (varies by setup/conditions)

• Top Rail: Yes (carry handle/rear sight assembly sits here; optics possible with a riser)

• Flash Hider: Metal AR-style, black (no orange tip on this one)

• Sling Mounts: Multiple mounting points; front appears reversible L/R, rear has mounts on both sides

View fullsize

Build Quality & Materials:

This rifle has a really solid, substantial feel and is nicely balanced. There’s a lot of metal here.

Notable metal parts include (from what you can see and feel):

• Upper & lower receiver areas

• Carry handle / rear sight assembly

• Front & rear sights

• Magazine (metal high-cap)

• Trigger guard (metal for sure)

• Barrel, flash hider

• Sling mounts, pins/screws, switches and assorted hardware

View fullsize

Polymer / rubber components include:

• Handguards

• Pistol grip

• Cheek rest area (polymer)

• Butt plate (rubber)

Overall: it looks great, feels great, and doesn’t feel “toy-ish” at all.

In the Box:

• G&G L85A2 ETU AEG rifle

• 1× metal high-cap magazine

• Cleaning rod

• Product brochure / extra paperwork

• Transport muzzle cover / cap

• Manual access via QR scan (links to G&G’s online manual)

View fullsize

Walk Around Notes:

A few highlights from handling it up close:

• Bullpup layout: compact overall, but the barrel/inner barrel length is still substantial.

• Sighting system: the carry handle doubles as the rear sight platform with flip apertures.

• Optics compatibility: you can mount an optic on the top rail, but you’ll likely want a riser so your eye line sits naturally.

• Dust cover + hop-up access: you can open the cover and access hop-up adjustments the normal AEG way.

• Charging handle note: my rifle did not come with the charging handle piece. I checked my unboxing footage and it wasn’t on there and it wasn’t in the box. It’s not essential for function, but at this price point it’s something you’ll want to confirm is included on yours.

View fullsize

Battery Compartment:

The battery area is under the handguard, and here’s the main downside:

• If you’re running a larger battery, you’ll likely need to remove hardware (including the sling mount and a bolt) to open the lower handguard section.

• With smaller nunchuck-style batteries, you may be able to fit them in with less disassembly, but bigger packs will probably require tools.

So yes: it works, but it’s not a quick tool-free battery swap design.

Quick Function Check:

I did a quick dry-fire demo using a 9.6V battery, and honestly it felt a bit underpowered/odd (some partial taps and inconsistent behavior). That could be the battery itself (mine was not great), but I would suggest this rifle will really come alive with a proper 11.1V LiPo and hope to use this setup in the field test video.

I’ve seen demos where the rate of fire is very high using an 11.1V setup, so that’s what I’ll be testing with for the shooting video.

View fullsize

Pros:

• Lots of metal in the construction with a super solid weight, feel, and balance

• Unique bullpup British-style rifle (not just another AR build)

• Simulated blowback adds a bit of feedback vs. standard AEGs

• Works with AR/M4-style AEG magazines (easy to find replacements/midcaps/highcaps)

• Good optics flexibility on the top rail (carry handle sight system included, or add your own)

• Programmable fire mode: Full Auto or 3-round burst

• No orange tip (and if you prefer one for visibility, you can always add your own)

Cons:

• Limited accessory mounting options (mostly just the top rail; not a modern “add rails everywhere” setup)

• Battery access can require tools and disassembly, especially for larger batteries

• Priced on the higher side (around $600+ CAD)

• My sample was missing the charging handle part, check yours when it arrives

View fullsize

Final Thoughts:

This is a really nice AEG. It feels premium in the hands, the two-tone green looks great, and it’s a cool change from the sea of AR platforms, while still keeping things practical with AR-style AEG mag compatibility.

The simulated blowback isn’t going to replace the feel of a true gas blowback rifle, but it’s a nice touch, and paired with the ETU/MOSFET system and upgraded internals, it helps justify why this model sits in a higher price bracket.

Next up: the field test / shooting video, ideally with a proper 11.1V battery so we can see what this rifle really does when it’s running at its best.

Availability:

• Canada Store

• United States Store

And remember we carry air guns, BB guns, airsoft guns, pellet guns, blank guns, and accessories in both our Canada and US stores.

Thanks for watching and reading! Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. More videos coming soon…

View fullsize

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

View fullsize

Specifications:

• Manufacturer: KJ Works

• Made In: Taiwan

• Power Source: 12g CO2

• Ammunition: 6mm Airsoft BBs

• Action: Semi-auto, full blowback

• Trigger: Single-action, skeletonized, adjustable (1911-style)

• Magazine: Full-size dropout metal magazine, 25-round capacity

• Weight: 1.96 lbs (890 g)

• Overall Length: 9.84 inches (250 mm)

• Inner Barrel Length: 4.25 inches (108 mm)

• Claimed Velocity: 366+ FPS

• Hop-Up: Adjustable

• Rail: Under-barrel Picatinny rail

• Sights: Fiber-optic front and rear

• Safety: Ambidextrous

• Magazine Release: Reversible

• Threaded Barrel: Inner and outer threading

• Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

View fullsize

In the Box:

• KP-19S CO2 Blowback Airsoft Pistol

• Full-size metal CO2 magazine

• Inner barrel extension

• Allen keys

• Small bag of Airsoft BBs

• Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

• Same frame, grip, slide profile, trigger guard

• Same skeletonized trigger and hammer

• Same magazine compatibility

View fullsize

Key Differences

• KP-19 (Non-S):

  • Flared magwell

  • Compensator

  • Removable rear plate for mounting a red dot

  • More competition-oriented configuration

• KP-19S:

  • No flared magwell (cleaner, more streamlined look)

  • Fixed rear sight

  • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

• Slide cutouts on the top and sides

• CNC-style gold/brass-colored fluted barrel visible through the slide

• Fiber-optic sights that are extremely easy to pick up

• Ambidextrous safety

• Reversible magazine release

• Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

View fullsize

Field Strip:

Field stripping follows a classic 1911 takedown:

1. Align the slide notch

2. Push out the takedown pin

3. Remove the slide assembly

Once opened, you gain easy access to:

• Inner barrel

• Recoil spring

• Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

View fullsize

Pros:

• High metal content with excellent weight and balance

• Strong, realistic full blowback action

• Excellent fit and finish typical of KJ Works pistols

• High-capacity 25-round metal magazine

• CO2 or gas compatibility (with appropriate magazines)

• Dual threaded barrel for accessories and extensions

• Bright fiber-optic sights (easy to acquire on any background)

• Short, light, adjustable 1911-style trigger

• Ambidextrous safety and reversible mag release

• Easy field stripping and hop-up access

Cons:

• Grip is wide and may not suit shooters with smaller hands

• Higher price point compared to similar KWC 1911 models

• Rear sight is not adjustable and does not accept a red-dot plate

  • Optics would need to be rail-mounted from underneath

View fullsize

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

View fullsize

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

View fullsize

In this Field Test Shooting video for the Umarex Marlin Old West CO2 BB Revolver I check real-world performance: first I measure fps using a fresh standard 12-gram CO2 cartridge and 4.5 mm steel BBs through my chronograph. After that I hang a paper target at 30 feet and fire 10 rounds using the Single-Action-Only trigger to see what kind of grouping the revolver delivers straight out of the box. If you haven’t already seen my Tabletop Video Review for the John Wayne Marshal CO2 BB Revolver, watch that for full specs and close-up footage.

For the velocity test I put five shots through the chronograph. The slowest registered 345 fps and the fastest hit 416 fps, with an average of 403 fps, right in line with Umarex’s claimed 400 fps. Perfect for popping cans and casual plinking out to roughly 30–40 feet. The test was done inside a sea can at about 18°C (≈64°F), which gives a middle-of-the-road CO2 performance; warmer weather will typically push velocities higher.

View fullsize

Next I set the paper target on my pellet trap at 30 feet. Using my usual semi-rested position (hands braced on a front sandbag and seated on a stool), I fired 10 rounds with the Marlin Old West. The group measured roughly 4 inches, a bit left and just slightly high from the bullseye — not far off and similar to the grouping I got with the John Wayne Marshal CO2 BB Revolver, although the Marlin’s velocity numbers were notably higher.

The Umarex Marlin Old West CO2 BB Revolver is an inexpensive, mostly-plastic Single Action Army style revolver. There’s a fair amount of polymer in the construction, but it still feels solid despite being on the lighter side. That lighter weight can make the gun feel a bit twitchy in the hand compared with heavier replicas, which can affect accuracy. At the time of this video the Canadian price was about $99, which makes it good value — especially since it loads 18 rounds quickly compared with traditional shell-loading revolvers, meaning more trigger time with less fuss. There are a number of similar replica revolvers available from our Replica Airguns stores in Canada and the US, so check our stock if you’re shopping around.

• Buy the John Wayne Marshal CO2 BB Revolver in Canada

• Buy the John Wayne Marshal CO2 BB Revolver in the US

View fullsize

Type: BB Pistol.
Manufacturer: Distributed by Umarex
Model: Marlin Old West Revolver
Materials: Mostly plastic, some internal metal parts.
Weight: 1.2 pound (544 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.5 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 400.

View fullsize

Trigger Pull: The trigger on the Umarex Marlin Old West CO2 BB Revolver is single-action-only, so you must cock the hammer before each shot. That removes most of the trigger travel and effort, giving the Marshal a short, light, and easy-to-manage pull. It’s ideal for deliberate, accurate shooting, but less suited to action-style rapid fire unless you’ve got a very fast thumb.

View fullsize

Accuracy: I haven’t tested the Marlin Old West model specifically, but it should perform very similarly to the John Wayne Marshal CO2 BB revolver, they’re nearly identical aside from licensing, safety, and magazine placement. In my field test of the John Wayne Marshal it averaged closer to 360 fps rather than the claimed 420 fps and produced roughly a 4-inch, 10-shot group at 30 feet. You can watch that video here; I’ll hope to be posting a dedicated field test for the Umarex Marlin Old West soon.

View fullsize

Build Quality: There’s not a lot to get excited about in terms of materials, the Umarex Marlin Old West CO2 BB Revolver is mostly plastic with some internal metal parts like the barrel, trigger, hammer, and CO2 components. It follows the common two-half, screwed-together budget construction, which looks cleaner on the side where the screws are hidden. At just over a pound it’s fairly light. With relatively few moving parts, it should be reasonably reliable; the mechanical components do what they need to do and feel suitably solid for the price.

View fullsize

Realism: At first glance the John Wayne Marshal CO2 BB revolver resembles a Colt Single Action Army Revolver in shape and size, but it’s much lighter, about half the weight. The lack of real bullet openings in the cylinder (when viewed from the front) reduces realism. I’m used to the newer generation of revolvers with working cylinders and loadable, removable shells; those are pricier and hold fewer rounds, but they offer a much more authentic experience.

View fullsize

Pros:

• A decent looking replica of a Colt Single Action Army Revolver.

• Single action only trigger is short and light and well suited to careful shot placement shooting.

• 400 claimed fps is about perfect for plinking at ranges up 30-40 feet.

• 18 round magazine has a nice high capacity and easy to load when empty.

• Should get lots of shots per CO2.

• Safety is well hidden underneath just in front of the trigger guard.

• I like the look with the all black receiver and simulated wood grips.

• CO2 Allen key is built into grip so always have it on hand and will not lose it.

• Marlin licensed and seems to be $50 less than the almost exact same John Wayne version.

Cons:

• Mostly plastic builds makes it a bit light in the hand.

• No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

• Not a big fan of the clamshell plastic packaging.

View fullsize

Comments:
The Umarex Marlin Old West CO2 BB Revolver is a solid choice if you want an old-west single-action cowboy BB shooter for less than the nearly identical John Wayne Marshal (it’s about $50 cheaper). If you want more authenticity, consider one of the shell-loading Single Action Army style revolvers, they cost more, shoot a bit slower, and carry fewer rounds, but they deliver a much higher level of realism.

• Buy the Umarex Marlin Old West CO2 BB Revolver In Canada

• Buy the Umarex Marlin Old West CO2 BB Revolver in the US

Type: BB Rifle.
Manufacturer: Umarex.
Model: AER16.
Materials: Metal and plastic build.
Weight: 4.9 pounds (2.2 kilograms).
Length: 32.25-35.5 inches (82-90.2cm).
Propulsion: AEG (with Deans Connectors).
Battery: Comes with an 11.1 V 120 Mac Battery and USB Charger.
Action: Semi & Full Auto.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 55 rounds. (650 shots per battery charge Aprox.)
FPS: 430fps.
Rate of Fire: 450+ rounds per minute in full auto (depending on battery voltage).

View fullsize

Trigger Pull: The trigger on the Umarex AER16 AEG full-auto BB Carbine, like most AEGs, isn’t a purely mechanical trigger. It works as an electrical on/off switch, so it feels more like a light, short single-action pull. You’ll notice a small delay between pulling the trigger and the BB firing because the trigger starts a motor that first pulls the spring and piston back. Once the spring is fully drawn and released, it compresses air that propels the 4.5 mm steel BB. Using a higher-voltage battery reduces that delay, since the motor spins faster and returns the spring more quickly, which also raises the full-auto rate of fire.

View fullsize

Accuracy: I have not Field Test Reviewed the Umarex AER16 AEG full-auto BB Carbine or even tried it out yet so far, I hope to make my Field Test Shooting Video for it as soon as I can as I am very interested in how the AER16 performs compared to the Barra 400e which is a very similar AEG 4.5mm BB firing Airgun. If the AER16 shoots anything like the Barra 400e,I can expect it to shoot pretty close to 400 fps, with near 1 inch 10 round groupings in semi auto and slightly larger groups in full auto. You can checkout my Barra 400e Field test here.

View fullsize

Build Quality: The Umarex AER16 AEG full-auto BB Carbine is metal and Plastic in design with a plastic hand guard and receiver. That said, it does have a lot of metal parts including the barrel, buffer tube, magazine, trigger, charging handle, magazine release, dust cover, inner bolt shield, selector switch, sling mount and other bolts and pins! It feels very solid when holding it and the fit and finishes is really good. Since there is less metal all around then you find with the Barra 400e, this makes the AER16 a fair bit lighter coming around 5 pounds versus the Barra’s 7.5 pounds.

View fullsize

Realism: The Umarex AER16 AEG full-auto BB Carbine is based on the AR platform in terms of its overall design without any specific licensing other than Umarex branding. It does have a lot of working parts including the charging handle which opens the dust cover showing the simulated bolt. There is no Hop-up like you would find in a similar Airsoft Rifle but with BB’s this is not so much of a requirement. You will also find a working magazine release for the all metal magazine along with a working selector for semi and full auto shooting. The all metal buffer tube allows for an AR style rear adjustable stock which I would assume you can swap out for just about any AR buffer tube based rear stock.

View fullsize

Pros:

• No CO2 required so cost to shoot is less.

• Comes with high volt LiPo battery and charger

• Very consistent velocity as there is no cool down effect from CO2 cooling the gun (Just like an AEG Airsoft rifle).

• Have the option to shoot in semi or full auto modes.

• Lots of metal in construction (buffer tube, magazine, barrel, trigger, dust cover, charging handle, safety switch, magazine release sling mount.

• Lots of rail option for mounting accessories.

• Flip up removable sights with fully adjustable rear peep sight (single aperture).

• 6 position adjustable rear stock.

• Nice high capacity 55 round magazine, easy and fast to reload with speed loader.

• Lots of working parts including the charging handle, dust cover, magazine release, selector switch.

• Comes with safe storage bag for LiPo battery (no fear of burning your house down).

View fullsize

Cons:

• No blowback operation as with some other Full Auto BB Rifles like the Crosman AR Series.

• Receiver is plastic not metal.

• When battery is installed you can not use all the shorter positions of the adjustable rear stock.

View fullsize

Comments:

The Umarex AER16 AEG full-auto BB Carbine is a nice addition from Umarex to what Barra came out with a year or so ago with their 400e AEG Rifle. I like that the AER16 is a true AR Replica which is a very popular design and it is a lot lighter than the kind of heft 7.5 pound Barra 400e which may be a bit much for some smaller or lighter shooters to handle. The Umarex AER16 AEG full-auto BB Carbine also has the advantage that it comes with an included 1.11V 1200mAH LiPo batter and USB Charger so no further purchasing is required to shoot it other than some BB’s which most Air gunners will normally have on hand. One last point to make is that the AER16 is the less expensive option over the Gen 2 Barra 400e that come in both metal and polymer version.

• Buy the Umarex AER16 AEG full-auto BB Carbine in Canada

• Buy the Umarex AER16 AEG full-auto BB Carbine in the US

View fullsize

Type: Blowback CO2 Airsoft Pistol.
Manufacturer: Distributed by KJ Works.
Model: KP-18 TBC.
Materials: Metal & Polymer.
Weight: 1.7 pounds (770 grams).
Total Length: 7.9 inches (20cm)
Barrel: 4 inches (10.6cm) metal non-rifled.
Propulsion: CO2 x 1 (Gas mags available).
Action: Semi & full auto blowback, SAO trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 22 round drop out full size metal magazine.
FPS: Claimed 410 (with barrel extension).

View fullsize

Trigger Pull: The trigger on the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol behaves like a true Single Action Only unit, pleasantly light with a fairly short travel. There’s a bit of initial take-up, but you can clearly sense the crisp break near the rear where the release occurs, extremely light, consistent, and free of any noticeable slack. Remember you’ll need to rack the slide to chamber the first BB; after that the blowback mechanism handles all subsequent cycling.

View fullsize

Accuracy: I haven’t yet fired the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol or produced a Field Test Performance video for it. However, I’ve already completed a full field and shooting test for the very similar KJWorks KP-13, so I’d expect comparable on-target performance between the two. I’ll post a full field test and shooting video for the KP-18 TBC down the road, stay tuned.

View fullsize

Build Quality: KJWorks pistols are generally well made, and I expect the KP-18 TBC to follow that pattern. Based on my hands-on time with the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol and my first impressions of the KP-18, fit and finish look excellent. As with other models, you’ll find metal and polymer components positioned where they would be on a real modern semi-auto pistol, which contributes to the solid, authentic feel.

View fullsize

Realism: The KJWorks KP-18 TBC is a close visual replica of the real-steel Glock G18-style pistol, albeit without official licensing. Umarex holds the Glock license for many BB and Airsoft models, and the fact that a green-gas magazine from the Umarex Glock 17 full-blowback fits the KP-18 suggests KJWorks may be manufacturing some Glock-pattern airguns for Umarex. Glock has historically objected to unlicensed replicas in North America, so how this will play out remains unclear. For now, both licensed and unlicensed options exist for buyers.

View fullsize

Pros:

• Metal and Polymer with decent weight and good feel to it.

• Heavy Full blowback operation.

• Excellent fit and finish as always with KJWorks pistols.

• High capacity full size drop out magazine that holds the CO2 and 22 rounds.

• Well hidden safety incorporated into the serial number under the barrel.

• Working trigger safety.

• White dot front sight and white outlined rear sight for easy target acquisition.

• All working components like a real steel Glock styled pistol.

• Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.

• Comes with barrel extension for higher velocity shooting (Possibly for easier import into Canada).

• Would make a good training weapon if you are a real steel Glock owner.

• Has a semi and full auto selector toggle located on the left rear of the slide.

• Can use CO2 or gas magazines.

• Field strip-able.

• No orange tip.

View fullsize

Cons:

• Sights are not adjustable.

• Full auto will use CO2 like crazy but may be worth it.

• Not a licensed version.

View fullsize

Comments:

If you’re a Glock enthusiast seeking a realistic training piece, you can shoot more affordably and in more places, there are more choices than ever. If official licensing matters, Umarex is the go-to option, although I haven’t seen a full-auto Glock from them yet. For those who prioritize a full-auto-style experience, the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol is as close to a real-steel Glock full-auto feel as you’re likely to find. I also appreciate the magazine interchangeability with some Umarex Glock mags if you already own a Glock 17 Airsoft pistol for instance. Whatever route you choose, it’s great to see more Glock-pattern airguns coming to market.

• Buy the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US

Yet another Mystery box with good stuff inside for me to discover and checkout and share with everyone! In this Replica Airguns August 2025 Mystery Box Video I reviewed three products from Umarex, and all of them are some sort of BB gun related product, one pistol, one revolver and one rifle and interestingly not all are CO2, as one is AEG powered which is more or less a new thing with steel BB guns. Barra introduced their 400e AEG AR Steel BB Rifle a while back and now Umarex has their own version of a similar AEG BB rifle in a sightly more true AR platform called the Umarex AER16.

The Umarex Marlin CO2 BB Revolver is really just a Marline licensed version of their Marshal CO2 BB Revolver but it us $50 less so unless you really want the Marshal licensing then go for the newer Marline version. Another Umarex product out of this months Mystery Box was the Umarex DS11 1911 NBB CO2 BB Pistol which is a pretty basic almost all plastic NBB CO2 BB Tactical 1911 that uses the standard metal BB Stick magazines. It does however look a lot better than most of these simple NBB Plastic BB Pistols on the market so in terms of looks it has that going for it for sure.

Umarex Marlin Old West CO2 BB Revolver

• Type: CO2 BB Revolver

• Manufacturer: Umarex

• Model: Marlin CO2 BB Revolver

• Power Source: 12g CO2 Cartridge (stored in grip)

• Action: Single Action

• Ammo Type: .177 Caliber Steel BBs

• Magazine Capacity: 18 Rounds (integral magazine)

• Barrel Length: 5 inches

• Muzzle Velocity: Up to 400 FPS

• Construction: Metal frame with polymer grip panels

View fullsize

Umarex DS11 1911 NBB CO2 BB Pistol

• Type: CO2 BB Pistol

• Manufacturer: Umarex

• Model: DS11 with Gold Barrel

• Caliber: .177 Steel BB

• Power Source: 12g CO2 Cartridge

• Action: Semi-Automatic

• Magazine Capacity: 18 Rounds (Stick Magazine)

• Velocity: Up to 400 FPS

• Material: Metal Slide, Polymer Frame

• Sights: Fixed High-Set Sights

• Accessory Rail: Under-barrel Picatinny Rail

View fullsize

Umarex AER16 AEG Full Auto BB Carbine

• Type: Electric BB Carbine

• Manufacturer: Umarex

• Model: AER16

• Caliber: .177 (4.5mm) Steel BBs

• Power Source: 11.1V Tri-Panel LiPo Battery (1100mAh, 35C discharge)

• Action: Select-Fire (Semi-Auto / Full-Auto)

• Magazine Capacity: 55 Rounds (Drop-Free Mag)

• Velocity: Up to 430 FPS

• Barrel Length: 15.9 inches

• Overall Weight: 4.9 lbs

• Stock: Adjustable

• Sights: Flip-Up Front & Rear (Adjustable/Removable)

• Rail System: Full-Length Picatinny Top Rail + M-LOK Handguard Slots

Wow, two mystery boxes this time to unpack and see what’s inside! I did have a bit of an idea that there was going to be two new BB Blowback CO2 Glocks from Umarex, the same ones I checked out at this years SHOT Show. There was also some more Air Pistols from various companies. One from Novritsch, the SSX23 NBB Gas Airsoft Pistol, that looked like it was Blowback as the slide does cycles. The Daisy 415 Powerline CO2 BB Pistol, a fairly simplistic Air Pistol, the Vigilante Dual Ammo CO2 BB/Pellet Revolver, I’m pretty sure I have visited before from Crosman. And one more item from Umarex, the Umarex Ruger P345 CO2 NBB Airsoft Pistol keeping to the basic low cost theme.

I also got a few accessor items from a company called GEAR STOCK, Some CO2 in 12 and 88 gram along with some 6mm aluminum Airsoft BB’s. A very cool rechargeable red and green laser that comes in a nice hard shell case and it has a picatinny rail on the bottom she you can stack a second accessory under it.

Here are some links and specs for the Airguns I show off in this mystery box video:

Umarex Glock 19 Gen 5 MOS CO2 Blowback BB Pistol

• Type: CO2 Full Blowback BB Pistol

• Velocity: 280

• Weight: 1.44 Pounds

• Length: 6.9 inches

• Ammo Capacity: 17

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

• Type: CO2 Blowback BB Pistol

• Velocity: 450

• Weight: 1.5 Pounds

• Length: 7.95 inches

• Ammo Capacity: 18

View fullsize

Umarex Ruger P345 CO2 NBB Airsoft Pistol

• Type: CO2 NBB Airsoft Pistol

• Velocity: 380

• Weight: 1.7 Pounds

• Length: 7.95 inches

• Ammo Capacity: 15

View fullsize

Novritsch SSX23 NBB Gas Airsoft Pistol

• Type: Gas NBB Airsoft Pistol

• Velocity: 450

• Weight: 1.9 Pounds

• Length: 9.75 inches

• Ammo Capacity: 24

View fullsize

Crosman Vigilante Dual Ammo CO2 BB/Pellet Revolver

• Type: CO2 BB and Pellet Revolver

• Velocity: 465-BB’s / 435-Pellets

• Weight: 2 Pounds

• Length: 11.36 inches

• Ammo Capacity: 6-BB / 10-Pellet round rotary magazines

View fullsize

Daisy 415 Powerline CO2 BB Pistol

• Type: CO2 NBB BB Pistol

• Velocity: 495

• Weight: 1 Pound

• Length: 8.75 inches

• Ammo Capacity: 21

View fullsize

In this Field Test Shooting Review, I test the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in the Replica Airguns Indoor Sea Can Shooting Range to find out what the real world velocity is in fps. I also shoot some .20 gram and .40 gram Airsoft BB’s at a paper target setup 30 feet down range to see what kind of accuracy I can achieve with a 6 round grouping. If you are also interested in more information like specifications and details along with some more close up video of the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver, then make sure to watch my Table Top Video for this rather chunky Shell Loading Airsoft Revolver.

Starting with my Chronograph Velocity Test, I loaded up a brand new 12 gram CO2 Cartridge and loaded 6 .20 gram Airsoft BB’s into the cylinder. My average 6 shot velocity of 514 fps was even a bit higher than what Umarex claims which is 500 fps. The fastest Airsoft BB was clocked at 531 fps with the slowest BB hitting a respectable 490 fps. That’s moving pretty fast for sure, probably a bit quick for close quarters indoor Airsoft games? Temperature was right around room temperature.

View fullsize

I was going to only test out the .20 gram Airsoft BB’s for my accuracy part of the Field Test, but the high velocity was not working all that well with the lighter .20 gram Airsoft BB’s. I only got around an 8 inch grouping as the lighter .20 gram Airsoft BB’s really wanted to curl though the air. I felt the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver could do a lot better using a heaver Airsoft BB’s so I redid my Accuracy Test, but this time using .40 gram Airsoft BB’s, and this for sure gave me much better results. 3 of the 6 Airsoft rounds made a single hole just above the bulls-eye fairly well centered with 2 shots increasing the grouping slightly to around 2 inches and 1 shot that came out a bit which I will classify as a flyer but if you include it, the grouping was more or less around 5 inches, still a lot better than the .20 gram Airsoft BB’s.

All in all the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is one of the nicest shell loading Airsoft Revolvers I have reviewed, and I do hope that one day it is available in a Steel BB version. I do recommend for sure using heavier Airsoft BB for better accuracy, and again if you are a smaller person or young adult, this Revolver may be a bit chunky at around 3 pounds. The single action trigger is very usable for precise shot placement, but I would say it is not overly light. Of course you can shoot double action if you want to unload the 6 rounds quickly when action shooting. I do like that Umarex has gone with larger shells and a beefier cylinder which is a lot closer to what your would expect from a 44 magnum in terms of shell casing size. If you want the ultimate Shell Loading Airsoft Revolver than this one is for sure on the top of the list!

• Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in Canada

• Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in the US

View fullsize

Type: Revolver CO2 Airsoft Pistol.
Manufacturer: Distributed by Umarex.
Model: Smith & Wesson 629 Competitor.
Materials: Mostly all Metal.
Weight: 3.3 pounds (1.55 kg).
Total Length: 12 inches (30.5cm)
Barrel: 6 inches (15cm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Revolver, SA & DA trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 6 round cylinder.
Velocity: Claimed 500fps.

View fullsize

Trigger Pull: The Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver shoots in either single action or double action. If you pull the hammer back, you can shoot in single action which will give you a super short trigger pull with virtually no takeup and a very light and predictable release, perfect for when you are wanting the best possible accuracy out of this Airsoft Revolver. You can also simply just pull the trigger in double action which means your trigger finger is doing all the work of pulling back the hammer and releasing it which is a much longer trigger pull that is between medium and heavy pull, but still fine for quicker action shooting.

View fullsize

Accuracy: So far I have not shot the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver but I have shot a lot of similar shell loading 6 shooter revolvers. Yes the cylinder and the actual shells are a bit larger but this should not really affect accuracy or power. Umarex does claim a max velocity of 500 fps which does seem high, so it will be interesting to see if the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver will actually hit these numbers. In my past Field Test Shooting Video Reviews I am generally able to get at least a 2 inch 6 shot groupings from 30 feet away from my paper target so hopefully that is the case with the S&W 629 Competitor.

View fullsize

Build Quality: If you’re looking for a very solid and hefty Airsoft revolver, than I don’t think there is anything more beefy than the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver. It is a whopping 3.3 pounds and is almost all metal so smaller handed shooters may find this one a bit too much to hold comfortably. Fit and finish is very good and I do really like the satin stainless steel look to it even though Umarex calls it a chrome finish.

View fullsize

Realism: I like the shell loading revolvers for the added realism you get manually loading the cylinder with 6 preloaded shells. In almost all of the shell loading 6 shooter revolvers, the cylinder and shells are actually smaller than what you would find in a real steel 6 shooter revolver, especially the Single Action Army Revolvers as they would normally shoot a .45 caliber shell rather than a .38 caliber shells. So it is nice that Umarex didn’t just go with already to go parts and they gave the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver newly designed larger shells and a larger cylinder, maybe the shells are not actually .44 caliber in size but the larger cylinder and larger shells does give it more realism. Of course almost all the parts function just like they would in a real steel revolver.

View fullsize

Pros:

• Almost all Metal build with a very heavy weight of 3.3 pounds.

• Full adjustable rear sight for windage and elevation.

• Comes with 12 reloadable shells, most only come with 6 shells.

• Grooved Pistol Grips for added comfort and grip.

• Picatinny rail on top of barrel for adding a red dot or optional sight.

• Nice Smith & Wesson markings on gun stamped into the frame.

• Option of shooting in single or double action, nice light single action trigger.

• I like the satin stainless finish.

• Super realistic loading and shooting with the removable shells.

View fullsize

Cons:

• Does come with an orange tip.

• No adjustable hop-up I can see.

• Rather large and heavy so not great for younger or smaller handed shooters.

• Velocity may be a bit hot for some Airsoft games.

View fullsize

Comments:

I think my main takeaway for the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is that Umarex has a new larger shell and cylinder design, which is closer to the actual shell and cylinder size of a .44 magnum, so maybe we will see this design coming out in future shell loading revolvers. Other noticeable features are for sure the size and weight of this beast. If you add a red dot or optical sight to it, then this Airsoft revolver could weigh in at nearly 4 pounds! If you want the ultimate shell loading revolver than this is probably going to be the choice to go with, unless you want it in 4.5mm steel BB or Pellet versions as at least for right now, it is only available in an Airsoft version, maybe that will change down the road…

• Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in Canada

• Buy the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver in the US

In this Mystery Box Unboxing Video I take a look at three Airsoft products, two pistols from Umarex and two AEG Airsoft Rifles from Specna Arms. As this is essentially an Unboxing Preview Video, I don’t go into a lot of detail for each item as this is my first real exposure to these items for the most part. I will be making full Table Top and Field Test Video for each item once I get to know them a bit better and share all the specifications and features along with shooting performance.

View fullsize

Starting with the Umarex products, I did get the chance to checkout the Umarex Smith & Wesson 629 CO2 Airsoft Revolver at this years SHOT Show, and it is a very solid shell loading 44 Magnum styled Revolver with full Smith and Wesson licensing. From what I remember this item may only come in the Airsoft version at the time of this review and it does have a claimed velocity of 500 which may be a bit hot for Airsoft games but it would be a lot of fun shooting at pop cans and the likes.

View fullsize

The second Umarex products is a pretty basic mostly clear plastic Spring Powered Beretta 92 FS Airsoft Pistol. It is fairly light weight with it’s mostly all plastic construction and the velocity is also on the lower side at only around 250 fps. Since it is distributed by Umarex it carries the Beretta licensing which is nice and all, but on a clear plastic gun I am not sure if is really a major feature.

View fullsize

The first Airsoft Rifle out of the Mystery Box was the Specna Arms SA-FX11 FLEX AEG Airsoft Rifle which is your standard AR configuration, mine was the shorter barrel version but it does come in a longer barrel version as well. The top and bottom receiver and most of the outer components are going to be Nylon Fiber Reinforced Plastic. It does include features like Rotational Hop Up Chamber, SA ETU™ Optical Electronic System Optimizes for improved trigger response and Quick Spring Change System to name a few.

View fullsize

Something I don’t see too often are Pink Assault Rifles! So it was nice to get the pink version of the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle. It does come in a Black and Tan version along with an all Black configuration. It’s really a great looking AEG Airsoft Rifle in any color you decide to go with, and I like the compact feel it has with lots of options for mounting accessories on the top bottom and side rails. You can get going right away using the included pop-up front and rear sights or throw a red dot or optical sight on it.

I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.

It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!

I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!

I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…

• Buy Airguns in Canada

• Buy Airguns in the US

View fullsize

Type: Less Lethal Pistol.
Manufacturer: Umarex - T4E.
Model: P2P HDP 50 Compact.
Materials: Metal & Polymer.
Weight: 1.3 pounds (585 grams).
Barrel: 4 inches (108mm) Smooth bore.
Total Length: 7.2 inches (183mm).
Power Source: 1x8 gram CO2.
Action: Semi auto - Double action only trigger.
Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball.
Ammo Capacity: 4 Round spring fed internal magazine.
FPS: 365 (11 Joules).

View fullsize

Trigger Pull: The trigger pull on Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so each round feels about the same with spring tension not playing much of a factor. In order to use the trigger, the Pistol will need to be fully charged by loading an 8 gram CO2 and giving it a smack on the bottom of the pistol grip of the CO2 screw. This will pierce the 8 gram CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the pressure indicator will retract and the trigger will not function and a new CO2 will be required for more shooting.

View fullsize

Accuracy: So far I have not tried out the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol in the Replica Airguns Indoor Airgun Shooting Range, I have shot its big brother the Umarex P2P HDP 50 Gen 2 and it did shoot around a 6 inch 6 shot grouping for me with a velocity of around 450 fps that worked out to around a 15 joule energy rating. I do not expect the same from the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol as it is claimed with a lower velocity of 365 and an energy rating of 11 joules. It should get pretty close to this based on it’s bigger brother’s performance.

View fullsize

Build Quality: The build quality of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is very good overall. It is mostly made out of plastic which is fine, since it is designed to be a compact and portable pistol which should be on the lighter side. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. I wish the trigger guard that swings down to load the ammo clicked back into place better as it seems easy for it to open up and potentially get caught on clothing or objects while using it.

View fullsize

Realism: This version of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol comes with the orange slide area to show that it is not a lethal firearm. It may also come in an all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. Making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the legal system. That said the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol does look kinda like a modern or futuristic semi auto pistol and functions much the same but with a lot less force.

View fullsize

Pros:

• Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe a decent amount power to hopefully deter an intruder.

• It is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.

• Decent power of claimed 365 fps with a 11 Joules energy rating.

• Can store the 8 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.

• Holds 4 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 8 shots per 8 gram CO2.

• Black post front and orange notch rear sights have enough contrast to make sighting on most targets stand out.

• Double action trigger feels smooth and not too heavy, also has a trigger safety on it.

• Comes with 10 rubber and 10 powder balls along with three 8 gram CO2 to get you started.

• Compact size is nice if you want to cary it with you, (law permitting).

View fullsize

Cons:

• Uses 8 gram CO2 which are harder to get and more expensive than 12 gram CO2, will also get less shots per CO2 and quicker cool down.

• No Picatinny rail or adjustable sights.

• Only holds 4 rounds.

• In Canada it does not seem you can get pepper balls easily most likely due to import regulations.

View fullsize

Comments:

I really liked the big full size brother of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol and it did turn out to not only be fairly accurate but also performed well in the power category, coming in even a bit higher than the claimed 13 joules of energy with a real world rating for me of 15 joules using standard .50 caliber rubber balls. So I am hoping the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol with its 365 fps rating and 11 claimed joules will at least hit the mark. Yes it is a bit less powerful but it is also a lot smaller and more compact if you where interest in conceal caring it. Again law permitting in your area! Stay posted for my Field Test Shooting Video where I will find out if the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol performs as expected.

• Buy the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol in Canada

• Buy CO2 Paintball Pistols in the US