I though I would feature the fact that we recently added some of the Tokyo Marui product line to our Canada Replica Airguns Store. Tokyo Marui is said to be one of the best Airsoft products on the market and they have been around for a while so they have had time to get it right! As Tokyo Marui is a Japanese based company they are restricted to only being able to use plastic frames and slides but even with this limitation the Tokyo Marui products that I have personally looked at are extremely well made.

In this Tokyo Marui New Product Preview Unboxing Video I take a look at 4 Tokyo Marui models; the Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol, the Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol, the Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol and lastly the Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle.

View fullsize

Tokyo Marui Strike Warrior .45 1911 Gas Blowback Airsoft Pistol

• Type: Airsoft Pistol

• Manufacturer: Tokyo Marui

• Model: Strike Warrior .45

• Materials: ABS

• Weight: 816 g (1.8 lb)

• Length: 205 mm (8.1 in)

• Barrel: 74 mm (2.9 in), metal

• Power Source: Green Gas

• Action: Semi-automatic, blowback

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 28 rounds

• FPS: 366

View fullsize

Tokyo Marui Hi-Capa 5.1 D.O.R (Direct Optics Ready) GBB Airsoft Pistol

• Type: Airsoft Pistol

• Manufacturer: Tokyo Marui

• Model: Hi-Capa 5.1 D.O.R.

• Materials: Polymer and metal

• Weight: 839 g (1.85 lb)

• Length: 220 mm (8.7 in)

• Barrel: 112 mm (4.4 in), metal

• Power Source: Green Gas

• Action: Semi-automatic, blowback

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 31 rounds

• FPS: 366

View fullsize

Tokyo Marui FNX-45 Tactical Gas Blowback Airsoft Pistol

• Type: Airsoft Pistol

• Manufacturer: Tokyo Marui

• Model: FNX-45 Tactical

• Materials: ABS

• Weight: 830 g (1.8 lb)

• Length: 220 mm (8.7 in)

• Barrel: 113 mm (4.4 in)

• Power Source: Green Gas

• Action: Semi-automatic, blowback, single/double-action

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 29 rounds

• FPS: 366

View fullsize

Tokyo Marui VSR-10 Pro Sniper Bolt Action Airsoft Rifle

• Type: Airsoft Rifle

• Manufacturer: Tokyo Marui

• Model: VSR-10 Pro Sniper vers.

• Materials: ABS

• Weight: 1.9 kg (4.2 lb)

• Length: 107.5 cm (42.3 in)

• Barrel: 430 mm (17 in)

• Power Source: Spring

• Action: Bolt action

• Ammo Type: 6mm airsoft BBs

• Ammo Capacity: 30 rounds

• FPS: 366

View fullsize

Type: Blowback CO2 BB Pistol.
Manufacturer: Distributed by Umarex.
Model: Walther PPS M2.
Materials: Metal & Polymer.
Weight: 1.25 pounds (567 grams).
Barrel: 3.34 inches, metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto single action only trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 round drop out metal stick magazine.
FPS: Claimed 340.

View fullsize

Trigger Pull: The trigger pull on the Umarex Walther PPS M2 Blowback CO2 BB Pistol is single action only so you will need to rack the slide before you can fire off the first shot. The trigger reset does not change even when cocked so there is a fair amount of take-up but it is very light right up until the release where you then feel the actual trigger pull. The release weight is fairly light.

Accuracy: At this point I have not shot the Umarex Walther PPS M2 Blowback CO2 BB Pistol but I have shot the original Umarex Walther PPS and it did fairly well getting a 2 inch grouping with one of my 10 shot strings. I was also able to get around 370 fps results when testing the original Umarex Walther PPS with my Chronograph. Hopefully the new updated Umarex Walther PPS M2 Blowback CO2 BB Pistol will perform equally as well?

View fullsize

Build Quality: The Umarex Walther PPS M2 Blowback CO2 BB Pistol is not super heavy but because of its small size it does feel solid in the hand. Fit and finish are both good and you will find metal parts in all the right places like the slide, trigger, barrel, magazine, slide catch release and lost of other metal parts internally.

Realism: The Umarex Walther PPS M2 Blowback CO2 BB Pistol is a really good replica when compared to the real steel version. For the most part it is really hard to tell them apart just looking at them. One difference is the trigger, you will find a trigger safety on the real steel version versus no trigger safety on the BB firing airgun. I am not talking about the cross bolt safety here as this is also unique to the Airgun version and not on the real still pistol.
Available From: The Replica Airguns Store.

View fullsize

Pros:

• A lot like the previous version PPS but more modern looking with smoother edges.

• Nice overall believable replica of the real steal Walther PPS.

• Fully Walther licensed via Umarex.

• Easy to use and see white dot sights front and back.

• Great small size weight and feel to it.

• Working slide catch and release locks back after last shot.

• Fit and finish is good.

• Smart built in Allen key/spring system.

• Stick mag but the butt plate hides the CO2 screw nicely.

• Recessed barrel looks the part.

• Expect decent blowback feel since it has a heavier slide spring than the previous PPS and that version even had decent blowback recoil for its size.

View fullsize

Cons:

• Not field strip-able.

• Only partial blowback action with stick magazine.

• Comes in clam shall packaging and has ugly warning instructions on slide.

View fullsize

Comments:

I like the format of these small compact conceal cary gun like the ASG Bersa BP9CC, of course the first generation Umarex Walther PPS Blowback and now the new Umarex Walther PPS M2. Small sized compact guns like the Umarex Walther PPS M2 here in Canada are considered Prohibited making them off limits for most Canadians even with valid Restricted handgun licenses so the BB firing version many be as close as you are going to get to owning a prohibited pistol here in Canada. I look forward to putting the Umarex Walther PPS M2 Blowback CO2 BB Pistol though its paces when I do my official Field Test Shooting video here in the Airgun Sea Can Shooting Range.

• Buy Umarex Walther PPS Airguns in our Canada Replica Airguns Store

• Buy Umarex Walther PPS Airguns in our US Replica Airguns Store

I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.

More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.

In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.

View fullsize

This John Wayne Lil Duke Giveaway didn't go exactly as planned as we had that YouTube Airgun Channel scare shortly after the original announcement so not as many people knew about it but we said we where going to giveaway two John Wayne Lil Duke BB Rifles and so that's what we are going to do!

Make sure to watch my Youtube video and find out if you won or not and congratulations to the two winners! For those that did not win this time around, you can still get yourself a John Wayne Lil Duke BB Gun by heading over to our Replica Airguns Canada or Replica Airguns US online web store and purchasing one the conventional way!

This year at SHOT Show 2018 I had the please of again interviewing Dani Navickas from Sig Sauer. Dani Showed me several new pistols and a new break barrel rifle Sig Sauer is offering this year. The Sig ASP20 Break Barrel rifle will come in both .177 and .22 caliber pellet shooting versions. The ASP20 has a lighter than most cocking effort of only 33 pounds using their proprietary GlideLite system, along with an adjustable ASP MatchLite trigger.

View fullsize

Another Target pellet airgun from Sig Sauer this year is the .177 caliber pellet shooting Super Target, styled after the Sig Sauer P210 firearm. The Sig Super Target is a single pump pneumatic single shot pistol designed for 10 meeter shooting with adjustable sights and a crips short light trigger.

View fullsize

Sig like several other companies has rebranded their own version of the KWC 1911 CO2 Blowback BB pistols. The Sig Sauer licensed BB 1911 is based on Sigs We the People line to celebrate the American people and their Constitution.

View fullsize

Another new Blowback Pellet firing Sig Sauer Air Pistol was also introduced at SHOT Show, the Sig Sauer X-Five. The X-Five uses their 20 round belt fed magazine and also has Sig's Cam Lever CO2 loading mechanism. You will also find a rear adjustable sight on the Sig Sauer X-Five Pellet Pistol.

View fullsize

Last but not least and perhaps one of the most interesting new products coming out later this year from Sig Sauer is the P320MHS APS which is another new rotary magazine Blowback Pellet Pistol. What's a bit different with the new Sig P320MHS is that it has a full size drop out magazine that holds the CO2 and belt fed pellet magazine. The P320MHS can also be fully field striped, has an open ejection port and is styled after Sig's real Steal M17 firearm.

View fullsize

First I wanted to wish everyone a Merry Christmas and Happy New Year, hopefully you get all the toys you have been wanting! Maybe we can help you out a little with that over on our Online Canada and US Replica Airgun Stores.

View fullsize

I also have a new Red Ryder Type BB Rifle to show off, this one is John Wayne licensed and called the John Wayne Lil Duke. At first glace it looks a lot like a Red Ryder but it has the large loop styled lever which is designed for easier use when wearing gloves, perfect for our Canadian weather ;) The John Wayne Lil Duke Lever Action BB Rifle has a really nice fit and finish, perhaps even a bit better than the classic Red Ryder BB Gun. I really like the real wood stock finish.

View fullsize

Another nice touch is that the John Wayne Lil Duke Lever Action BB Rifle comes with a lasso scope rail that you can attach just behind the rear iron sight to accommodate dove tail scope mounts. Just make sure to really tighten down the rear screw as it comes loose super easy due to the spring vibration. I would even recommend adding a bit of lock tight to the screw to be sure.

View fullsize

Here are some of the main specifications for the John Wayne Lil Duke Lever Action BB Rifle: 4.5mm Steel BB's, leaver action spring piston, 350 fps, 550 round magazine, 2.5 pounds, smooth bore 9.5 inch barrel, adjustable rear sight for elevation, included scope mount for 11mm dovetail rings, metal and wood build.

View fullsize

Look forward to a head to head showdown between the John Wayne Lil Duke Lever Action BB Rifle, the Classic Red Ryder BB Gun and the Marlin Cowboy BB Rifle.

View fullsize

Type: Break barrel pellet rifle.
Manufacturer: Umarex USA.
Model: Ruger Explorer.
Materials: Metal and polymer parts.
Weight: 4.45 pounds (2.5 kg).
Barrel: 12 inches, metal rifled.
Propulsion: Spring piston.
Action: Single shot.
Ammunition Type: .177 caliber pellets.
Ammunition Capacity: 1.
FPS: 495.

View fullsize

Trigger Pull: I found the Ruger Explorer Youth Break Barrel Pellet Rifle to have a fairly light trigger, there is some initial take up with a smooth almost undetectable break or release point, I found that as I shot the Ruger Explorer Youth Break Barrel Pellet Rifle the trigger seemed to be breaking in a bit which made it a bit hard to figure exactly when the trigger was going to release but I feel over time and once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in the trigger will become more predictable.

View fullsize

Accuracy: Since I have already made a shooting or field test video for the Ruger Explorer Youth Break Barrel Pellet Rifle, I can comment on its performance n this review! With 6 grain lead pellets (on the lighter side), I was able to get a 5 shot Chronograph average velocity of 485 fps. Using heavier 7-8 grain pellets the velocity slowed down a bit to around 400 fps. In terms of accuracy the Ruger Explorer Youth Break Barrel Pellet Rifle performed well getting about a 1 inch 10 shot grouping on my paper target setup 30 feet down range. I know the Ruger Explorer Youth Break Barrel Pellet Rifle can do better than this once the trigger settles down a bit since some shots went off unexpectedly.

View fullsize

Build Quality: The Ruger Explorer Youth Break Barrel Pellet Rifle is not an expensive air rifle and is more or less an entry level spring piston pellet shooter. That said it is built fairly well with a metal receiver, barrel and trigger setup. The modern looking stock is polymer and the steel barrel is coated in a synthetic soft plastic to help with long term durability. The real fiber optic sight is plastic so you will have to be careful with it as it does protrude a bit from the air rifle.

View fullsize

Realism: Since the Ruger Explorer Youth Break Barrel Pellet Rifle is not a replica realism is not really a factor here but it does look like a gun so treat it as if it was a real gun since most people will not know the difference. Always transport and store any airgun safely and discreetly.

View fullsize

Pros:

• Really great looking air rifle with a modern look to it.

• Finish is very durable with its polymer stock and plastic/rubber coated barrel.

• Fully adjustable fiber optic sights are easy to sight in and use.

• Receiver is notched for ring mounts so you can add an optical sight or red dot to it.

• Trigger is fairly light, just need some break in time with it.

• Cocking effort is fairly easy at 16.5 pounds.

• Great size gun for all ages.

• Power and accuracy were good for an entry level air rifle.

View fullsize

Cons:

• I did find the trigger break/release point to be a bit unpredictable but I feel this is a break-in issue and will become more consistent over time.

• You have to remember to push that safety in with ever shot.

View fullsize

Comments:
The Ruger Explorer Youth Break Barrel Pellet Rifle is marketed as a Youth air rifle but in reality it would be great fun for all ages. I am a fairly large person at 6 feet tall and I had no problem dealing with the slightly shorter configuration. The trigger guard is nice and open and allows for large fingers which is not always the case with airguns designed for smaller individuals. The overall quality you get with the Ruger Explorer Youth Break Barrel Pellet Rifle for the lower entry level price tag is very good and in terms of performance I feel you for sure get your monies worth with the Ruger Explorer Youth Break Barrel Pellet Rifle.

Buy Ruger Explorer Youth Air Pellet Rifle in Canada

Buy Ruger Explorer Youth Air Pellet Rifle in the US

View fullsize

I don't do a lot of Springer (Spring Piston) Air Rifle shooting tests or even reviews for that matter. Mainly for a couple of reasons: Number 1, my content is mostly focused around Replica style Airguns and Number 2, it's kind of hard to test out the longer range airguns in my 30 foot airgun range. That said I felt the Ruger Explorer Youth Break Barrel Pellet Rifle would be a really great airgun to review since it is both affordable and even though it is targeted for the youth market, it really does make a great shooter for all ages.

View fullsize

I have not done a Table Top Review for the Ruger Explorer Youth Break Barrel Pellet Rifle but plan to shortly so stay posted for more detailed info on the Ruger Explorer Youth Break Barrel Pellet Rifle down the road in that review.

View fullsize

Even at 30 feet out, shooting the Ruger Explorer Youth Break Barrel Pellet Rifle should give us an idea of the ballpark this gun is able to shoot within, I also only used the adjustable fiber optic open sights for this review but I would suggest a low powered optical Scope or even a Red Dot since the Ruger Explorer Youth Break Barrel Pellet Rifle is grooved for scope mounts.

View fullsize

So how'd we do during my Field Test Shooting Video for the Ruger Explorer Youth Break Barrel Pellet Rifle? Not bad I would say! Using about 6 grain rather light weight .177 caliber lead pellets I was able to get really close to the 500 fps claimed fps mark coming in just under at a 5 shot testing average of 485 fps. I did put a couple heavier grain pellets through my Chrony Chronograph and got closer to the 400 fps mark, still not bad for this lighter sprung spring piston air rifle.

View fullsize

In terms of accuracy, shooting at my paper target setup 30 feet down range in my Sea Can Airgun Range, I shot about a 1 inch 10 shot grouping. I was finding the trigger break-in to be a bit unpredictable during this testing which led to some premature shots going off so I do feel once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in and me getting use to the trigger break, I should be able to improve on this result.

Overall the Ruger Explorer Youth Break Barrel Pellet Rifle is a really nice entry level airgun perfect for all ages and not just the youth market. It looks really cool, is easy to cock and has a very resilient finish. Oh ya it shoots pretty good to!

View fullsize

Buy Ruger Explorer Youth Break Barrel Pellet Rifle in Canada

Buy Ruger Explorer Youth Break Barrel Pellet Rifle in the US

View fullsize

Yet another retest for an airgun I have already reviewed. But some airguns need another "shot"! Today I just kind of felt like shooting a springer and the Baikal MP-53M Break Barrel .177 Pellet Air Pistol came to mind. I'm not the best at shooting spring pistons airguns since they take a more softer relaxed grip and I tend to hold guns with a bit of a firmer grip.

If you're interested you can watch my previous Field Test Shooting Video for the Baikal MP-53M I performed a couple years back outside on my deck.

View fullsize

As always in my new Sea Can Shipping Container I perform a Chronograph velocity test to see what the real world feet per second is and  then I perform a followup accuracy test shooting 10 rounds at a paper target 30 feet down range using a rested seated position. During the velocity Chrony test for the Baikal MP-53M Break Barrel .177 Pellet Air Pistol I was able to get an average of 405 fps which was much higher than my previous testing where I averaged 319 fps. I was using different 7 grain lead pellets but I don't think they where that much different in weigth since the Diabolo pellets should have been around 6-7 grain.

View fullsize

Moving onto the accuracy portion of my Field Test review, this time around my shots stayed a little tighter than last time stretching out to about 2 inches but most of the 10 shots where all within 1 to 1.5 inches. The trigger on the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is really great, super light with just a little take-up and virtually a hair trigger after that with zero friction.

View fullsize

I also wanted to mention that cocking the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is fairly easy and that I did find I needed to set the rear sigh to the all the way down position to get my shots to hit close to the bullseye as this gun seemed to like to shoot rather high out of the box.

Buy Baikal MP-53M Pellet Air Pistol

View fullsize

Another revisit for an inexpensive and fun BB shooter, the Crosman Marlin Cowboy BB Rifle! I have done some previous video reviews and comparisons for the Crosman Marlin Cowboy BB Rifle so make sure to check them out. I also recently did an update Field Test Shooting Video for the Daisy Red Ryder BB gun which is a very comparable airgun to the Crosman Marlin Cowboy BB Rifle.

View fullsize

Here is a quick overview of the Crosman Marlin Cowboy BB Rifle, it's designed for younger smaller shooter with it's short stock but it's still fun of all ages! You can store 700 4.5mm Steel BB's in its internal magazine and Crosman claims a max velocity of 350 fps. Like the Daisy Red Ryder the power source is a spring piston that is activated by the lever action.

View fullsize

Now let's talk about how the Crosman Marlin Cowboy BB Rifle performed in my Sea Can Field Test Shooting test...  Crosman claims a max fps of 350, my Chronograph results came in at a 5 shot average of 316 fps which is not bad compared to the Daisy Red Ryder that also has a claimed fps of 350 but only shot around 240 fps.

View fullsize

So the Crosman Marlin Cowboy BB Rifle is the clear winner in terms of velocity over the Daisy Red Ryder but what about accuracy? That's a different story, the Crosman did not perform all that great for me shooting at a paper target 30 feet away using a rested shooting position. I shot 10 rounds at my paper target and got about a 5-6 inch grouping, there was an underlying smaller tight group that was closer to about 3 inches but a god 3-4 of the BB's came out of it spreading out the group significantly.  Compare that to the Daisy Red Ryder with a nice tight 2 inch group.

View fullsize

So what do you want? Power or accuracy? I figure since the Crosman Marlin Cowboy BB Rifle is really targeted of the younger more entry level shooter that it should have good accuracy so they know when they are doing it right and less concerned on if the gun is performing as it should. Sure power is fun and smashing your targets does give a certain satisfaction but you have to hit the target first :)

View fullsize

Both the Crosman Marlin Cowboy BB Rifle and Daisy Red Ryder BB Gun are fun airguns for sure, I guess it just comes down to which one you want to buy...

View fullsize

It's been a while since I pulled out the old Daisy Red Ryder BB Gun. And I know I have already done some Vimeo videos for the Red Ryder and the Crosman Marlin Cowboy but I really wanted to make an updated Field Test Video specifically for the Red Ryder and see how it fairs in a more controlled shooting test.

View fullsize

As always with my Field Test Shooting videos I test out the velocity using my Chrony Chronograph and see what the real world fps is compared to what Daisy Claims which by the way is up to 350 fps. I also setup a paper target about 30 feet back and take 10 shots using a rested and seated shooting position to determine what kind of grouping I can get and how well centered the airgun is out of the box.

View fullsize

During my velocity testing the Daisy Red Ryder BB Gun shot well under the claimed 350 fps by around 100 fps. I can say that the Daisy Red Ryder BB Gun was super consistent and shot between 242 fps as a low and 244 fps as a high averaging 243 fps. The Daisy Red Ryder is sure one of the most consistent airguns I have tested to date in terms of velocity constancy! This will help a lot with vertical accuracy.

View fullsize

During my accuracy test I would have to say the Daisy Red Ryder BB Gun shot pretty close to a 2 inch grouping and was pretty well centered with 4 shots hitting the black bullseye , I did pull my last shot a bit which extended the group a little but this was for sure my fault as I new I pulled it as soon as I shot it, the stock actually dropped on my shoulder a little just as I pulled the trigger.

View fullsize

Overall I really enjoy shooting the Daisy Red Ryder BB Gun, it's so simple yet so fun to shoot, there is just something about a lever action rifle that I really like and the super low cost to purchase and shoot a Daisy Red Ryder BB Gun also makes it a must have for anyone no matter how many airguns you own or what type you shoot. 

Buy the Daisy 1938 Red Ryder in Canada

Buy the Daisy 1938 Red Ryder in the US

View fullsize

I was a bit surprised by the Umarex DX-17 Spring Powered BB Pistol, it actually shot a lot better than I was expecting it to perform. I did have to aim rather low since the Umarex DX-17  BB Pistol likes to shoot on the high side but if you are shooting at closer in ranges then you won't have to adjust your aim point so high.

View fullsize

Getting into my performance testing for the Umarex DX-17 Spring Powered BB Pistol, I placed 5 shots through my Chrony Chronograph and averaged 210 fps which again was very close to the Umarex claimed 200 fps, even a little bit higher! he DX-17 is a single shot repeater but because of the BB reservoir you can quickly reload follow up shots by simply point the Umarex DX-17 Spring Powered BB Pistol a little upward while pulling the slide back and pushing it forward to active the spring piston and load a BB at the same time.

View fullsize

As I mentioned the Umarex DX-17 Spring Powered BB Pistol shot on the high side, at 30 feet it's a good 8-9 inches high but I have a feeling that this is about as high as the BB's will rise since they are not going that fast and gravity will start bringing them back down. At about 10-15 feet out from a target the Umarex DX-17 Spring Powered BB Pistol seemed to shoot about 3-4 inches high so not nearly as bad and this can be adjusted pretty easy by simply aiming a bit under the target you are shooting at. In terms of a 10 shot grouping theUmarex DX-17 Spring Powered BB Pistol got about a 4 inch grouping which I have to say kind of surprised me as I was expecting a much larger spread.

View fullsize

So for about $20 you kind of get what you pay for but I really think with the Umarex DX-17 Spring Powered BB Pistol you perhaps get a little more! It has a really good trigger, seemed to be built pretty tuff, shot exactly right on the claimed fps mark and was even able to keep a reasonable grouping. And to keep costs down even more you never need to buy CO2 so that's another bonus.

Buy the Umarex DX17 Spring BB Pistol in the US

Buy the Umarex DX17 Spring BB Pistol in Canada

View fullsize

Type: BB air pistol.
Distributer: Umarex.
Model: DX-17.
Materials: Mostly plastic build.
Weight: 1.6 pounds (726 grams).
Barrel: 4.27 inches, non-rifled.
Propulsion: Spring.
Action: Single shot.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 15 round BB reservoir.
FPS: 200.

View fullsize

Trigger Pull: The single action only trigger pull on the Umarex DX-17 Spring Powered BB Pistol is actually pretty good. It's fairly short with only a little bit of very light take up and then an easy release that has no added friction. So you will have to get use to when and where the release happens but it is a really decent trigger for such an inexpensive airgun.

View fullsize

Accuracy: I have only shot the Umarex DX-17 Spring Powered BB Pistol a few times to get use to the mechanical operation of using this spring powered pistol since there is a very specific order in which you need to cock and load the Umarex DX-17 for proper operation. I did find the DX-17 shot a bit high for me at 30 feet out so I had to adjust my aim point about 5-6 inches lower to hit targets at this range. For further out shooting you many not need to do so since the fps is fairly low and I would expect the BB to drop pretty quickly. In terms of power being that the Umarex DX-17 Spring Powered BB Pistol is only rated at 200fps, well it seems sufficient enough for plinking away at targets and should have no problem getting through a pop can.

View fullsize

Build Quality: I was expecting this $20 low cost BB airgun to be fairly low quality in general but when I took it out of the plastic clamshell packaging I was pleasantly surprised by the overall quality and how the Umarex DX-17 Spring Powered BB Pistol felt in my hand. It has a good weight to it and the fit and finish are really good. Mechanical parts tolerances feel snug and the plastic used feels of good quality.

View fullsize

Realism: The Umarex DX-17 Spring Powered BB Pistol as far as I know is not a replica of any specific real steel gun in production but it does kind of remind me of a Browning Hi-power at least the back half and the way the frame angles up a bit in front of the trigger. Other than that it looks the part of a real gun. The DX-17 has what looks like real working parts on it with the slide catch, magazine release and magazine but plat all moulded into the airgun.
Available at the: Replica Airguns Store

View fullsize

Pros:

• At $21 Canadian its great value for a target plinker.

• It actually looks and feels pretty good in person, better than I expected build quality and weight to it.

• No CO2 required so very cheap to shoot.

• Single action trigger is actually really decent, better than most airguns.

• Accessory rail for adding a red dot or perhaps a tactical light.

• 15 round reservoir makes followup shots quicker and no fumbling around loading BB’s in-between shots.

• Lower fps means if you do do something stupid you are less likely to have to make a trip to the doctor

View fullsize

Cons:

• Pretty low fps so don’t expect any long range shooting or great penetration.

• Sights are not adjustable and it seems to shoot kind of high.

• Why not rifle the barrel and make pellets an option?

View fullsize

Comments:

I rarely review these super low cost airguns especially spring powered ones with low fps, it almost seems like why would you want any of that? But you know the Umarex DX-17 Spring Powered BB Pistol is actually a great little airgun and you really can't beat the price tag. You are also going to save a bunch of money not having to buy CO2 and once you load 15 rounds into the BB reservoir you can empty the DX-17 fairly quickly. Sure the power seems a bit low but it gets the job done and like I said if there was an accident, you are less likely to break that window or require medical attention. I think this would be a great add on to an existing order you might be making with us, that way you wouldn't have to pay for shipping for this one item and you get a fun little plinker for only $20 more.

My Vimeo Videos for the Umarex DX-17 Spring Powered BB Pistol:

Buy Umarex DX-17 Spring Powered BB Pistol in Canada 

Buy Umarex DX-17 Spring Powered BB Pistol in the US

Type: Airsoft Pistol.

Manufacturer:Umarex.

Model:Walther P99 Compact

Materials: Mostly plastic with some metal parts.

Weight: .5 pounds (227 Grams).

Barrel: 3 inches, metal non-rifled with internal Hop-up.

Propulsion: Spring Piston.

Action: Single Shot, Single Action Only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 11 shot full size drop out magazine with 60 round reservoir.

FPS: 280 using .12 gram BB's.

Trigger Pull: The single action only trigger pull on the Umarex P99 Compact Clear Spring Airsoft Gun is a bit heavier than I expected since generally speaking single action triggers simply just need to release the hammer or striker. There is a little bit of take-up initially but then the release is fairly crisp, just a tad firm but since this is not an action shooter and a full rack of the slide is required to pre charge the internal spring, having a heavier trigger pull is not a big deal and did not seem to effect my accuracy in any way.

Accuracy: I didn't get a lot of shooting time with the Umarex P99 Compact Clear Spring Airsoft Gun but I can say it seemed to be shoot fairly accurately. I tested it out shooting on a paper target from 20 feet back using a non rested standing position. The Umarex P99 Compact Clear Spring Airsoft Gun did shoot a bit high and to the left but my 10 shot grouping was within 1.75 inches with the exception of one stray that shot a little more to the right. I was using .20 gram BB's but they did seem to get to the target pretty quickly and penetrate the paper fairly well. I would say they were traveling well over 200 fps.

Build Quality: The Umarex P99 Compact Clear Spring Airsoft Gun is about a $25 gun so you can't really expect too much in terms of quality materials but that said, the gun does feel solid and well put together. I had no issues shooing it and for the price you should get plenty of good use out of it.

Realism: The Umarex P99 Compact Clear Spring Airsoft Gun is realistic in terms of its shape, operation and even the Walther P99 licensing and trade marks. But as is expected being a clear plastic gun it falls short in terms of feeling and looking the part of a real gun. But that's kind of the point here, this gun is supposed to clearly look like and Airsoft gun and not a real gun including the orange red tip.

Purchase it from: The Replica Airguns Store

Pros:

• Super low cost and even come with an extra mag and some starter BB’s.

• Full size drop out mags are nice.

• All the parts feel pretty tight, does not feel hokey, even has some metal parts where they are needed.

• Has a rail for accessories.

• No CO2 required, just your Airsoft BB’s.

• Walther licensing and Trademarks.

• Slide stays back when out of BB’s.

• Has internal Hop-up.

• Has a floating barrel like the real steel version would.

• Makes a good starter pistol for someone getting into the hobby that may not want a gun that looks too realistic.

Cons:

• Is kind of on the light side at about half a pound.

• The single action trigger is a bit heavy but works fine, you're not going to be shooting rapped fire with this one anyway.

• Being a clear gun obviously takes away from the realism but that is the point of this gun so as not be confused with a real gun.

• Shoots a bit high and to the left.

Comments:

Right from the get go I was not expecting much from the Umarex P99 Compact Clear Spring Airsoft Gunbeing a bit of an Airgun snob and personally tending to stay away from the like of these clear plastic non-blowback super low cost Airsoft pistols. But after playing around with it for a bit I could really see how a first time Airsoft buyer could really enjoy the Umarex P99 Compact Clear Spring Airsoft Gun. It shoots just fine and costs next to nothing to buy and shoot. And I know there are many younger folks that watch my video reviews and perhaps their parents may be sitting on the fence about allowing them to buy an Airsoft gun out of fear that so many of them look so real. The Umarex P99 Compact Clear Spring Airsoft Gun clearly looks like an Airsoft gun which makes it pretty hard to get in trouble with yet you can still enjoy the Airsoft shooting experience without freaking your parents out!

My Vimeo Video Review for the Umarex P99 Compact Clear Spring Airsoft Gun:

Buy the Umarex P99 Compact Clear Spring Airsoft Gun in Canada

Buy the Umarex P99 Compact Clear Spring Airsoft Gun in the US

Content Link Block

Select a page and create a visual link to it. Learn more

Replica Airguns Blog | Airsoft, Pellet, & BB Gun Reviews

One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”

I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…

In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there

First let’s get the super obvious stuff out of the way! 

• Did you put a new CO2 cartridge in it and is it pierced all the way?

• Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?

• Is the safety off?

• If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?

CO2 Related Problems:

Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.

There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.

CO2 Valve Related Problems:

Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?

One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.

If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine  take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!

BB’s getting Stuck in the Blowback Gas Tube:

I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.

BB’s Rolling Out of the Barrel of Your CO2 Airgun:

This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)

A Little Maintenance Can Go a Long Way!

Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.

What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?

There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.

First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.

But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.

Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?

One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.

The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.

If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!

You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.

One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.

Why Are My Blanks Not Firing?

This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?

So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.

Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.

Why is the Trigger or Hammer Not Operating Properly?

I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.

Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.

One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.

Why does the Flame Come out the Top of My Blank Gun and Not the Front?

If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.

Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?

I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!

In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.

Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.

Power Sources Covered in this review: CO2 - Spring Piston - Variable Pump -HPA (High Pressure Air)

Pro’s:

• CO2 Airguns allow for fast repeat shooting, great for action shooters, generally CO2 Airguns will supply a medium power range. No need to pump or cock your CO2 powered weapon in-between shots and a CO2 power source can allow for a very realistic action of the gun you are shooting.

• Spring Piston Airguns are best suited of single shot situations, they can provide low to high power output depending on the spring used. Spring Piston Airguns are very low cost to operate since you only need to buy the Pellets or BB’s. Spring Piston Airguns are not greatly effected by outside temperatures.

• Variable Pump Airguns allow you to decide how much power your gun will have and can offer very high power output depending on the Airgun. Variable Pump Airguns are very low cost to operate since you only need to buy the Pellets or BB’s. Variable Pump Airguns are not greatly effected by outside temperatures. Variable Pump Airguns generally have very low recoil and vibration.

• HPA (High Pressure Air) Airguns generally do not require pumping or cocking in-between shots and some even come in semi automatic or bolt action. HPA Airguns can have very high power output and even be used on larger game using large caliber ammunition. HPA Air Rifles have lower recoil and low vibration. HPA Airguns can be charged ahead off time so they are ready for use when you need them.

Con’s:

• CO2 Airguns require the additional cost to buy the CO2 as they do not function without it. CO2 Airguns have a limited power output and lose power as you shoot and use up the CO2. CO2 Airguns are effected by hot and cold temperatures and will have less power in colder temperatures and may not even work in super cold environments.

• Spring Piston Airguns require cocking before each shot. Spring Piston Airguns can have a lot of recoil and vibration, so much so that special optics must be considered when buying an optical sight. The action of the spring recoil can effect accuracy, especially if you are not use to the vibration and recoil or have spent some time practicing using a Spring Piston Airgun.

• Variable Pump Airguns will require multiple pumps to achieved maximum power output which can take some time in-between shots. So you are going to have to work for each shot.

• HPA (High Pressure Air) Airguns require the use of a manual pump to fill their built in air tank to maximum pressure and it does take a lot of time to manual fill an HPA tank. Alternatively you can have the air tank filled at a shop or buy a pressurization system similar to a scuba tank out paintball setup, the cost of this setup can be very high but will save you the castle of manually pumping air in to your HPA Airgun. HPA Airguns are generally a little more bulky then other Airgun systems since they have to accommodate fairly large air pressure tanks.

Power:
Generally speaking a longer barrel is going to allow for more power. If you compare most CO2 pellet pistols to CO2 Pellet Rifles, you will find that the CO2 Pellet Pistol will generally shoot about 300-400 fps using a standard lead Pellet. On the other hand many CO2 Pellet Rifles can get up to as high as 600 fps which is much better speed for humanly shooting some smaller pests.

If you are talking about Springer or Variable Pump Air Pistols versus their Air Rifle counterparts, again the Air rifles will generally shoot with much more power. I have seen some none CO2 Air Pistols shoot up into the 500-600 fps range but again compered to none CO2 Air Rifles, they can even double these numbers.

Some of you may ask about Steel BB Pistols and Rifles. I personally would never really sue this type of ammunition for pest control simply because most BB Rifles have much less raw power than Pellet Rifles and steel BB’s will not be as accurate at any type of longer distance.

Stability:
When holding any rifle from the shoulder, you have three point of contact with your body spread out in a much longer distance than a two handed pistol grip. Holding steady even without a rested position is much easier using a rifle. Even when using a rested position, the rifle will more stable.

Accuracy:
A big factor in accuracy is stability but there are also other factors to consider. Barrel length its self does not make the gun more accurate, you only need a few inches of barrel length to get constant accurate results from a gun. What makes longer barreled guns more accurate is the distance between the rear and front sight. The closer the sights are together, the more margin for error there is, the longer you spread out the sights from each other, the more accurate the sighting system becomes.

Overall More Humain:
When you consider Air Rifles tend to have higher power, better accuracy and overall more consistency than shorter barreled Air Pistols. The logical choice for humanly shooting a Pest is to use the Air Rifle. The last thing you want to do is make any animal suffer, even if it has been causing a lot of havoc around your home or farm or place of business.

I already made several review videos for both Gletcher NGT (4.5mm Steel BB) and the Gletcher NGT R (.177 Cal Pellet) Revolvers, including table top and shooting videos. So make sure to check those videos out for more information on both versions of Gletcher NGT and NGT R Revolvers.

I did however miss some noteworthy details that I wanted to cover in this video. Firstly, the real steal Nagant M1895 Revolver this Gletcher NGT is styled after has a very unique gas-sealing system that the Airgun version does not replicate or really require but it is worth mentioning.

Here is some more info on how the original Nagant M1895 Revolver Gas Seal System works:

(From Wikipedia) The M1895 by contrast, has a mechanism which, as the hammer is cocked, first turns the cylinder and then moves it forward, closing the gap between the cylinder and the barrel. The cartridge, also unique, plays an important part in sealing the gun to the escape of propellant gases. The bullet is deeply seated, entirely within the cartridge case, and the case is slightly reduced in diameter at its mouth. The barrel features a short conical section at its rear; this accepts the mouth of the cartridge, completing the gas seal. By sealing the gap, the velocity of the bullet is increased by 15 to 45 m/s (50 to 150 ft/s.) This feature also eliminates the possibility of injury through the dangerous expansion of gases from the cylinder behind the barrel, which are easily capable of severing a finger if the user holds the gun incorrectly (with a finger positioned in front of the cylinder during fire) - a noted safety-issue in conventional revolvers.

Moving on to some of the features incorporated into the Gletcher NGT NGT-R CO2 BB and Pellet Revolver that I did not point in any of my previous videos. There is an extractor rod that can be used to extract a shell, this is not really necessary on the airgun version since the shells do not expand and tighten on the cylinder as they would n the real steal Nagant M1895 Revolver built is nice that we can replicate this feature with the Airgun version. You can also remove the cylinder completely from both the BB and Pellet shooting Gletcher NGT NGT-R CO2 Revolvers. The cylinder is actually very heavy and adds a lot of weight to this compact 7 shot Revolver.

It is always nice when an Airgun is built in such a way that it replicates the real steal version as closely as possible and the Gletcher NGT NGT-R CO2 BB and Pellet Revolvers do this nearly perfectly.

Buy Gletcher NGT Revolvers in Canada

Buy Gletcher NGT Revolvers in the US

I get asked on a daily bases form many of my Vimeo Viewers about how and if there is a way to get rid of the White lettering on Airguns, Typically people are wanting to remove the intrusive Warning instructions from Airguns like the Cybergun Tanfoglio Witness 1911, the Cybergun/Swiss Arms GSG 92/P92 and many other CO2 Replica Airguns that have lettering or branding that you may want to get rid of.

In this Instructional Tutorial Video I show you how can at least tone down the white lettering and even completely remove it on some Airguns without damaging the Airguns finish underneath the white lettering. You will have to use some patience and perhaps repeat this method a few times but the end result is worth the effort.

The magical product I use to remove the white lettering on many popular Airguns is a product from Birchwood Casey called the Presto Gun Blue Pen. This product is actually designed to touch up real steel gun in areas where the blueing has worn off, lucky for us the Birchwood Casey Presto Gun Blue Pen also works well to remove the ugly white lettering from Airguns.