Entries in Single Shot,Paintball

Umarex T4E HDS Double Barrel CO2 Paintball Shotgun Field Test Review

1 Comment

I don’t do a lot of paintball gun reviews, they just don’t come across my table all that often so it’s a lot fo fun when I do get the chance to shoot some beefier caliber ammunition in the Replica Airguns Sea Can Indoor Airgun Shooting Range. Of course I use rubber ball ammo rather than standard paintball rounds in order to keep the mess to a minimum.

I have not done my Table Top YouTube Video Review yet for the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun but you can checkout a Preview Video for now. In Summary the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a pretty much exactly what the name says. It’s basically a sawn off pistol grip styled double barrel shotgun that uses CO2 and shoots .68 caliber paintballs. You have a selector for shooting either out of the left or right barrel or if you want to can even both at the same time but this really slows down the fps so I would not advise it with the 200 fps version that I was testing with.

Now on to the actual testing of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun! As alway I like to find out how close to the factory claimed fps I will get. Umarex claims around 200 fps for this version which is around 7.5 Joules of energy, apparently there is a 16 Joules version that shoots closer to 300 fps but we do not carry it at least right now. I put a couple fo rounds through my Umarex T4E HDS Double Barrel CO2 Paintball Shotgun using rubber ball paintballs which will be a little bit heavier than a standard paintballs and my first shot yielded 180 fps, my second shot was slightly higher at 184 fps so pretty close to the claimed 200 fps and that was in not the warmest of environments since the temperature in the Replica Airguns Sea Can Indoor Airgun Shooting Range was only 16 Degrees Celsius (60 Degrees Fahrenheit).

Next up it was time to see how the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun performed shooting at a target setup 30 feet away. Since there are no actual sights on the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun I had to kind eyeball it and as I shot it more and more I was able to get my shots closer to the center of the target. The Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is not a tac driver but at 30 feet out you should be able to hit an 8-10 inch target pretty consistently. I don’t recommend using the double shot option since the same amount of CO2 is applied to both rounds that would normally be applied to one round decreasing the fps by about half making the paintball rounds shoot a lot slower and not really being that effective. This may be an option with the higher 300 fps version of the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun.

So all in all I had a lot of fun shooting the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun, it’s kind of like a big boy Nerf Gun that you can take onto the paintball field if you wanted to. For home defense I think it is a bit underpowered but there may be a little bit of shock factor that could slow someone down or deter them enough to either give you time get away or take shelter somewhere safe. Maybe using the pepper rounds would work OK in this situation? Either way the Umarex T4E HDS Double Barrel CO2 Paintball Shotgun is a really cool and unique CO2 Airgun that is not overly expensive and a welcome addition to any Airgun enthusiasts collection.

Categories: .68 cal, CO2, Field Test, Paintball, Review, YouTube Video, Pistol Tags: Umarex, T4E HDS

Umarex T4E HDS Paintball Shotgun and Diana Bandit - Chaser Pellet Pistol Unboxing

No Comments

In this Unboxing Preview video you really can’t get too much different in terms of product types. First up I showcase the Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun. I then take a look at the Diana Bandit PCP and Diana Chaser CO2 Bolt Action Match Grade .177 Caliber Pellet Pistols.

The Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun is a two shot short barrelled that could come in handy for CQB engagements but it looks to be designed also as a none lethal home defence weapon since you can load a CO2 without piercing it but when in a bind you simply hit the CO2 screw and it pierces the CO2 activating the gun for instant use. I will have to test this one out to see if it really has enough power to stop an intrude, after all you only get two shots so they better count!

And then we have two Diana Match Grade CO2 Bolt Action Pellet Pistols, both has a similar bolt, sights, barrel and trigger setup but with the Diana Bandit you get a wooden grips, an included 10 shot rotary magazine and it’s PCP powered so you will need a compressor or a pump to use it. The Diana Chaser on the other hand is CO2 powered, has a plastic pistol grip and does not include the 10 shot rotary magazine but you can buy it later on if you get bored loading one round at a time into the breach. I expect both of these pistols to be tack drivers!

The Umarex T4E HDS Double Barrel .68 caliber CO2 Paintball Shotgun is available in both our Canada and US Online Replica Airgun Store while Both Diana Pellet Pistols can only be found in our Canada Store.

Categories: .68 cal, 4.5mm / .177 cal, CO2, Paintball, PCP, Pellet, Pistol, Review, Rifle, Single Shot, YouTube Video Tags: Umarex, T4E HDS, Diana, Bandit, Chaser

Umarex T4E HK 416 Training Marker CO2 Paintball Rifle Field Test Review

No Comments

If you have not already watched my Table Top Video Review for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle than make sure to do so if you are interested in more specifications and details.

I don’t often make many Paintball Review Gun Videos let alone Shooting Videos so this one is a bit different than the norm. Lucky for me I have some .43 caliber Rubber Paintballs that I can use in my Indoor Sea Can Shooting Range so as not to make a mess of things. As per usual I like to use a brand new 12 Gram CO2 Cartridge for my testing and for your reference the temperature was right around room temperature or 21 degree Celsius, 69 degrees Fahrenheit.

First up I generally perform my Chronograph test to see what the real world velocity or fps is for the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. I shot a short string of rubber rounds through my Chronograph and was able to get a 280 fps average with the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle. This is plenty enough power for the intended target down range to feel the paintball effect without causing too much trauma.

With the remaining 10 rounds in my Umarex T4E HK 416 Training Marker CO2 Paintball Rifle magazine, I then setup a brand new paper target 30 feet down range and using a rested and seated shooting position and carefully unloaded the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle into the target. I was a bit surprised to see the rounds spread out a fair amount perhaps as much as 10-12 inches but at least half where in the target rings.

I would not recommend the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle as a long range paintball marker but it would be perfect for close quarters ultra realistic simulations. I would like to give actual .43 caliber paintballs a try outside to see if accuracy would be better, maybe the rubber balls grip the barrel a bit too much causing some random and unexpected spinning to occur? Either way the Umarex T4E HK 416 Training Marker CO2 Paintball Rifle is a really unique and fun Paintball Gun to shoot, maybe not for everyone but if you want the most realistic Paintball Marker then it would be a great option.

Categories: .43 cal, Blowback, CO2, Field Test, Paintball, Review, Rifle, Semi Auto, YouTube Video Tags: Umarex, T4E HK416

Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle Table Top Review

No Comments

Type: Paintball Rifle.
Manufacturer: Umarex - T4E.
Model: H&K 416.
Materials: Metal & Polymer.
Weight: 3016 grams (6.65 pounds).
Barrel: Metal smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi-Automatic with internal working bolt blowback action.
Ammo Type: .43 Caliber Paintball or Rubber Ball.
Ammo Capacity: 14 Rounds.
FPS: 330-460?

Trigger Pull: The trigger pull on Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is pretty typical of what you would find on an AR styled rifle. Since the internal bolt cycles with each shot, the trigger is engaged and the Paintball rifle is ready for the next shot with a very light and short single action trigger pull.

Accuracy: So far I have not had the opportunity to test the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle other than placing a few rounds down range into my ammo trap to see how it shot and felt. Without actually shooting rounds through the Chronograph I don’t really know what the fps velocity is going to be but I can say it felt like it was shooting perhaps even over 400 fps? Out of the box the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle was shooting rather low but you can adjust the rear sight for windage and elevation.

Build Quality: The build quality of the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is very good since this Paintball gun is made for military and law enforcement training use. You’re going to find high quality metal and polymer where you would normally find them on the real steel version. The bolt carrier is expected to last at least 3000 shots but you do get an extra one included with it.

Realism: The fully licensed Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is about as realistic as you are going to get in a Paintball Rifle. It’s basically made very similar to a GBB Airsoft Rifle of the same type with a working bolt and pretty much all working parts on it. You can even break the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle down into the lower and upper receiver halves. The bolt blowback action is not super strong but this may be a good thing since CO2 usage will be more efficient allowing for higher fps and more shots per CO2.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

Pros:

  • Seem to have decent fps, will see when I do my Field Test?

  • Full Size drop out magazine that holds 14 .43 caliber Paintballs and the CO2.

  • Removable 4 position adjustable stock.

  • Removable and adjustable iron sights.

  • Lots of rials for adding accessories.

  • Fully licensed H&K 4116 replica via Umarex.

  • Blowback does give a bit of recoil feedback and allow for a true single action trigger.

  • Very high quality metaled polymer build.

  • Used as a training weapon for military and law enforcement.

  • Comes with extra bolt carrier.

Cons:

  • Very expensive, well over $1000!!

  • Comes with blue hardware but can be swapped out (Pistol grip, But stock, Magazine).

  • Bolt carrier may wear out at around 3000 rounds.

Comments:

If’ you’re looking for the ultimate in Paintball Rifle realism the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle is going to meet that requirement for sure. It will come at a pretty decent cost but you are going to have a very unique Airgun that not many people will own. And as they say you do get what you pay for which is realism, quality and reliability. I look forward to testing out the Umarex T4E T4E HK 416 Training Marker CO2 Paintball Rifle on the Chronograph using some rubber ball ammo, I may even take it outside for some paintball ammo shooting, we will have to see…

Categories: .43 cal, Blowback, CO2, Paintball, Review, Rifle, Semi Auto, YouTube Video Tags: T4E HK416, Umarex

KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol Table Top Review

No Comments

Type: BB Pistol.
Manufacturer: KWC.
Model: TT-33.
Materials: Mostly all Metal with some plastic parts.
Weight: 1.54 pounds (700 grams).
Barrel: Non-rifled.
Propulsion: 12 gram CO2.
Action: Non-Blowback - single action only trigger and hammer.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 19 rounds.
FPS: 423

Trigger Pull: The trigger pull on the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol is strictly single action only, and I mean like a Single Action Only Revolver. You will need to cock the hammer manually with each shot since the trigger does not actuate the hammer as it is only used to release the hammer. And since there is no blowback action the slide recoil will also no accurate the hammer. Because fo this don’t expect the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol to be an action shooter but the trigger is decent on it since it is short and not too heavy.

Accuracy: You are going to have to wait just a little bit for my Field Test Shooting result since I have not tested or shot the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol. I hope to have this information for you next week when I do my Field Test Shooting Video for the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol.

Build Quality: The KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol is built well enough with a mostly metal construction. It feels very solid and the only plastic parts I can tell for sure being the grips. Everything else appears to be all metal. The entire gun is basically two separate halves joined together with screws that you can see but in terms of being well built I would have to say the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol is a very solid well built airgun.

Realism: This is one area where the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol may let a few people down, there is not working slide or blowback operation and with the screws required to join the two haves of the gun being fairly visible on the right side of the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol, it does take away form the realism. The biggest downside for me is the lack of an ejection port entirely, not even a fake one etched into the slide? On the hotter hand you do get a recessed barrel, full size drop out metal magazine and I like the way KWC worked the safety into the slide catch release rather than adding another safety somewhere on the gun where it was not meant to be.

Pros:

  • One of a handful of 4.5mm BB shooting Tokarev replicas out there.

  • Very solid and weighty gun for it’s size. Mostly all metal.

  • Full size drop out metal magazine that holds the CO2 and BB’s.

  • Recessed barrel adds to realism.

  • Non-blowback will increase fps and CO2 efficiency.

  • SAO trigger shoudl help with accuracy.

  • Did a good job of making the safety discreet by working it into the slide catch release.

Cons:

  • No action shooting since it has a SAO trigger/hammer.

  • No Blowback operation and no ejection port on slide?

  • Has the rather noticeable assembly screws on the slide.

Comments:

I like certain things about the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol and then some things make it hard for me to like it. I like the weigth and feel and almost entirely full metal build including the full size drop out metal magazine. I also expect the single action only trigger to work well for getting some decent accuracy. On the other hand having to cock the hammer on what shoudl be a semi auto pistol is a bit weird and the lack of the ejection port completely on the slide is a big oversight in my books. Maybe the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol will redeem itself when I do my Field Test Shooting video next week and sway me back to the in favor side? We will have to wait and see.

My Table Top Video of the KWC Model TT-33 CO2 SAO Non-Blowback BB Pistol:

Categories: 4.5mm / .177 cal, CO2, Pistol, Review, Single Shot, YouTube Video, Semi Auto Tags: KWC, Tokarev, TT-33

Gletcher M1944 Mosin Nagant CO2 BB Rifle Field Test Review

No Comments

I have a few other related videos you may want to also checkout for the Gletcher M1944 Mosin Nagant CO2 BB Rifle and it’s little brother the Gletcher M1891 Sawn Off version.

In this Field test Shooting Video of the Gletcher M1944 Mosin Nagant CO2 BB Rifle I test out its velocity in feet per second and also what kind of accuracy I can get shooting at a paper target 30 feet away from a rested seated position with a sand bag up front.

Starting with the Gletcher M1944 Mosin Nagant CO2 BB Rifle’s power I first placed 5 shots through my Chronograph using a brand new 12 gram CO2 and RWS 5.1 grain zinc coated steel BB’s. The lowest fps shot was 334 and the highest was 363 fps, averaging 344 for the 5 shots. Not all that fast for a CO2 BB rifle but keep in mind the inner barrel is the same length as the shorter barreled Gletcher M1891 which actually shot a m much higher average fps of 428. I was shooting the Gletcher M1891 on a much warmer day which will effect velocity with CO2 airguns but by nearly 100fps? Seems a little bit off?

Next I cleared my shooting bench and setup a fresh paper target 30 feet back and proceeded to see what kind of grouping I could get with the Gletcher M1944 Mosin Nagant CO2 BB Rifle. I did not sight the gun in so I was only really interested in how close the BB’s would place together, not so much if I could hti bulls eyes. Perhaps I should have made sure I was close to the bulls eye since out of the box I was noticeably shooting low and to the left. It is really easy to adjust the sights to shoot higher but not so much for windage. That said I got about a 4 inch 10 shot grouping shooting the Gletcher M1944 Mosin Nagant CO2 BB Rifle. Again compared to the Gletcher M1891 Sawn Off little brother version the Gletcher M1944 didn’t perform as well in this test since I was able to get closer to a 2 inch grouping with the Gletcher M1891 in my earlier testing.

So what did I learn today? Maybe bigger is not always better? There are all sorts of things to consider when performing these test. Temperature, CO2 and BB’s being used but probably a lot of times it’s just me not exactly on my game that day. For me the main reason why I would buy the Gletcher M1944 Mosin Nagant CO2 BB Rifle is not as much for how it shoots but more because where else can you get a historic bolt action BB rifle like this. And for some people that may be the only version they may are able to buy where they are located or if they don’t want the hassle of getting a firearms license.

Categories: 4.5mm / .177 cal, BB, CO2, Field Test, Review, Rifle, Single Shot, YouTube Video Tags: Gletcher, M1944, Mosin Nagant

Gletcher M1944 Mosin Nagant CO2 BB Rifle Table Top Review

1 Comment

Type: BB Rifle.
Manufacturer: Gletcher.
Model: Gletcher M1941 (Replica of Mosin Nagant).
Materials: Metal & plastic.
Weight: 8.2 pounds (3.7kg).
Barrel: 5.5 inches, smooth bore (inner barrel).
Propulsion: CO2.
Action: Bolt - single shot - single action.
Ammunition Type: 4.5mm Steel BB's.
Ammunition Capacity: 16 rounds.
FPS: 427fps

Trigger Pull: The trigger pull on the Gletcher M1944 Mosin Nagant is single action only, the bolt cycle does most of the work setting up the loading of a BB into the chamber and pre-cocking the bolt spring. The take up is minimal and the release is about medium to light weight. The bolt snaps forward firmly and with a nice clanking sound, you can even feel the weight of it as it moves forward.

Accuracy: I have not shot the Gletcher M1944 Mosin Nagant CO2 BB Rifle yet but have had the opportunity to shoot the M1891 Sawn Off version. I had mixed result with the Gletcher M1891 BB Rifle since you can not shoulder the gun making it a bit unsteady while it waves around out in front of you as you aim it. When shooting it rested I was able to get much better results shooting a fairly tight 1.5 inch 10 shot grouping in my Sea Can Airgun Range. By the way my velocity testing on the Gletcher M1891 BB Rifle resulted in an average of 430 fps.

Build Quality: The Gletcher M1944 Mosin Nagant CO2 BB Rifle is really well made, you can tell by it's robust weight and how solid the action feels when you draw the bolt back and release it the first time. Everything that would be metal on the real Mosin Nagant is metal on the Gletcher M1944 including the full size dropout magazine that holds both the BB's and CO2. Yes the stock is imitation wood but it looks very close to real wood and will fool most people until very close inspection. The overall finish on the Gletcher M1944 Mosin Nagant CO2 BB Rifle looks great.

Realism: I've never actually put my hands on a real steel Mosin Nagant Rifle but from the photos I viewed online, the Gletcher M1944 Mosin Nagant CO2 BB Rifle really accurate in terms of being a BB replica. Of course the magazine has been adapted to fit CO2 and BB's but once placed in the gun it is nearly impossible to tell it from a real Mosin Nagant. The weight of this rifle (8.2 pounds) gives it the feeling of genuineness. I have read online that a real Mosin Nagant stock can be adapted to fit the Gletcher M1944 so that would indicate that it is fairly true in size and construction to a real Mosin Nagant Rifle.

Pros:

  • Very Unique BB gun.

  • A piece of history you can shoot in your back yard.

  • Mostly all metal gun.

  • Nice heavy 8.2 pound weight to it.

  • Adjustable rear sight, at least for elevation.

  • Nice single action trigger.

  • Bolt action feels great and has a firm release.

  • Full size drop out metal magazine that holds both the BB's and the CO2.

  • More fps than claimed and decent accuracy, I expect to get lots of shots out of a single CO2 because of the magazine design.

  • Imitation wood is very believable.

  • Comes with sling.

  • Breaks down similarly to the real steel version, so maybe able to upgrade parts like the stock with a little bit of work.

Cons:

  • Stock is plastic but looks good considering.

  • No real way to adjust windage and the rear sight does wiggle a bit from side to side which could throw off the aim.

  • Bayonet may scratch the stock a bit?

  • Price point may make it out of range for some buyers?

Comments:

The Gletcher M1944 Mosin Nagant CO2 BB Rifle is a great option for anyone looking for a historic bolt action Rifle but in a BB version. It for sure looks and acts the part but in a much quieter and backyard friendly version. Sure yo can get the Gletcher M1891 Sawn Off version ofr about half price but to really get the full Mosin Nagant experience you are going to want to have the larger full size Gletcher M1944 Mosin Nagant CO2 BB Rifle, no two ways around it. Being abel to shoulder the gun makes it way more natural and easier to shoot.

My Vimeo Table Top Video of the Gletcher M1944 CO2 Replica BB Rifle:

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Review, Rifle, Single Shot, YouTube Video Tags: Gletcher, Mosin Nagant, M1944

Caldwell Ballistic Precision Chronograph First Field Test

No Comments

I am happy to say that the first Field Test using my new Caldwell Ballistic Precision Chronograph  went really well for me today. Perhaps I have found a new brand of Chronograph that will last longer than a year or so and give me reliable results that I can count on...

In my testing I tried out four different airguns, I picked airguns for the most part that I have not done Chronograph testing with yet so I could at least get you some hard results for these new guns waiting for their Field Test Shooting Video Reviews. First I tested the Umarex Glock 19 4.5mm Steel BB Pistol and I got five results out of five shots averaging 389 fps. Next up was the AW Custom AG-HX2003 Double Stack Tactical 1911 Full Blowback CO2 BB Pistol, again a put five shots through my Caldwell Ballistic Precision Chronograph and got five good results with an average fps of 329.

I then moved on to an Air Rifle, the Crosman DPMS SBR CO2 Blowback BB M4 Rifle and placed six shots through my Caldwell Ballistic Precision Chronograph resulting in five good readings, there was one error in this string of shots but it may have been an alignment issue on my part? My average fps for the Crosman DPMS SBR CO2 Blowback BB M4 Rifle was 387. Last of the guns I tested was the Air Venturi V10 Match Pellet Pistol which is a single pump airgun. My pellet choice was RWS 6.9 grain lead pellets and all three of my test shots delivered near exactly the same results averaging 374 fps.

So other than that one chronograph reading error for the day which may have been an alignment issue on my part, the Caldwell Ballistic Precision Chronograph performed excellent for me. I would also like to note that I was using the same Caldwell LED Lighting System I have been using in my Sea Can Indoor Airgun range which as expected fit perfectly onto their own Chronograph system and worked well.

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Field Test, Full Auto, Pellet, Pistol, Pump, Review, Rifle, Semi Auto, Single Shot, YouTube Video Tags: Crosman, Crosman Remington DPMS SBR, Umarex, Umarex Glock, Glock 19, AW Custom, AirVenturi, V10 Pellet Pistol

Another Update Video this Week - What's Going On?

No Comments

Some more stuff came in and I just had to show it off before moving on with the reviews. I know you're going to like it so here we go again...

First off the super anticipate Umarex Glock 19 CO2 BB Pistol has arrived and is now available in our Canada and US online Replica Airgun Stores so get yours while we still have them, if we still have them? No this version is not a blowback or even working slide version and yes it has the dreaded stick mag! That all said the Umarex Glock 19 CO2 BB Pistol feels really solid and well made and heck it's the first licensed Airgun Glock ever so it's a good start. Umarex has said that more elaborate blowback versions will be coming out down the road. There are full blowback Airsoft version licensed by Umarex but the FPS is too slow right now for us to import them into Canada, hopefully there is a fix for this at some point...

I have been waiting at least three months now for my AW Custom AG-HX2003 Double Stack Tactical 1911 Full Blowback CO2 BB Pistol to show up. Canada Customs got their hands on it and felt it needed to be processed for three months before delivering it to me. at least I did end up getting it without a fight!

AW Custom is primarily an Airsoft gun manufacturer but is moving into the 4.5mm Steel BB market and has a few 4.5mm Steel BB offerings which have interchangeable parts with their Airsoft guns if you need them. I will making a Table Top and Field Test Sooting Video for the AW Custom AG-HX2003 Double Stack Tactical 1911 Full Blowback CO2 BB Pistol, my list is getting pretty huge now but I am excited I have all these new products to review for everyone!

Last on my Update list is a rather pricey one but not something I have ever revised on this channel, It's the Umarex T4E HK416 .43 caliber Paintball M4/AR Rifle made specifically for m military and police training. This gun is super realistic with similar working parts to its real steel counterpart. Check the Umarex T4E HK416 .43 caliber Paintball M4/AR Rifle in our Canada and US Online Stores.

Categories: .43 cal, 4.5mm / .177 cal, Airgun News, BB, CO2, Blowback, Pistol, Review, Replica Airguns News, Rifle, Semi Auto, YouTube Video, Paintball Tags: Umarex, Umarex Glock, Glock 19, Glock, M4 Carbine, T4E HK416, AW Custom, AG-HX2003

Air Venturi V10 Match Pellet Pistol Field Test Review

No Comments

When it comes to accuracy, match grade pellet pistols are going o be your best bet, not always the most powerful but they are sure good at driving pellets down range with super small groupings. The Air Venturi V10 Match Pellet Pistol is no exception to this statement and considering all that it offers it is fairly reasonably price for a match grade pellet pistol of this caliber.

Right off the bat I have to admit that my Chrony Chronograph stopped working, all I get is gibberish on the screen (Strike two for Chrony!). So I was not able to get any personal Chronograph results even though I even tried using my Airsoft Chronograph without success :( I did however watch a few other Youtube Video reviews where users tested out the FPS using a similar Chronograph and the Air Venturi V10 Match Pellet Pistol should get right around 390 fps using 7 grain lead pellets, this is close to the 400 fps claimed velocity.

Now for my shooting results that I was able to deliver on... I shot about 6-7 rounds downrange on a fresh paper target setup around 30 feet away. Sitting with a sandbag up front for stability, my Air Venturi V10 Match Pellet Pistol shot 6 out of the 7 rounds all in one hole that stretched out to about 1/4 of an inch. I did get one flyer that extended the grouping to about an inch, but this gun is a accurate no doubt even with my limited shooting skills.

The Trigger, sights and even the pistol grip on the Air Venturi V10 Match Pellet Pistol are fully adjustable so you can setup your Air Venturi V10 Match Pellet Pistol pretty much any way you like but it is made for a left handed shooter, at least the one I had tested out. The trigger is very light weigth out of the box and should be good to go for most people. It's also nice that you only need one pump for full power which saves you a bit of time in-between shots. All in the Air Venturi V10 Match Pellet Pistol is a great well priced match grade target pistol ready to drive virtually anything you point it at!

Categories: 4.5mm / .177 cal, Field Test, Pellet, Pistol, Review, Single Shot, YouTube Video, Pump Tags: AirVenturi, V10 Pellet Pistol

Air Venturi HellBoy M4 - John Wayne 1911 - V10 Match Pistol Preview

No Comments

In this table top preview video I take a look at three new products from Air venture that we are now carying in our Online Replica Airguns Store.

First off is yet another rebranded KWC 1911 CO2 Blowback BB Pistol, this time with John Wayne Licensing in the classic 1911 A1 version with a distressed look. What can I say, people just can't get enough of these KWC 1911's and with all the choices out there you are sure to find something you like!

I then show you around a new Competition Target Pistol called the V10. The Air Venturi V10 Competition Target Pistol shoots .177 caliber pellets at around 400 fps with only a single pump! The Air Venturi V10 has adjustable sights, trigger and even the grip is adjustable. I am expecting some decent actuary out of this one...

Last up but perhaps the most unique product from Air Venture is the HellBoy CO2 BB Firing M4 Air Rifle. The Air Venturi HellBoy has an all metal receiver, magazine, carry handle, buffer tube and barrel with only plastic used for the stock and fore grip which is to be expected. The Air Venturi HellBoy shoot in semi auto only with a double action style trigger and does not have blowback action. You can expect to get 18 4.5mm Steel BB's in the all metal magazine that holds the CO2 as well and a top velocity of 495 fps. Did I mention you can fully field strip the Air Venturi HellBoy?

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Pellet, Pistol, Review, Semi Auto, Single Shot, YouTube Video Tags: AirVenturi, HellBoy, V10 Pellet Pistol, John Wayne 1911

Umarex Strike Point .22 Caliber Pellet Pistol Field Test Review

No Comments

The Umarex Strike Point is a lot like the Crosman series of bolt action multi-pump pellet shooters at least in design. Sure it has a more futuristic and plastic build to it but mechanically it works pretty much the same as the Crosman Bolt Action Multi-pump Pellet Pistols. What I really wanted to know is will the Umarex Strike Point .22 Caliber Pellet Pistol perform as good?

Umarex states that you can pump the Umarex Strike Point .22 Caliber Pellet Pistol 10 times maximum so that's what I will did for my Feet Per Second Testing and the Umarex Strike Point .22 Caliber Pellet Pistol was very consistent producing a 427 fps 3 shot string using fairly heavy 14.3 grain lead pellets. Of course lighter alloy pellets should go right up to the claimed 500 fps. I also tested out a 5 pump shot to see what kind of velocity I would get since you don't always need maximum power for basic plinking and target shooting. The velocity did drop as expected but not that much getting 356 fps which is plenty fast for all intents and purposes.

Moving on to my Target accuracy testing, I placed 6 shot in total on my paper target setup 30 feet down range using a rested and seated shooting position. My first 4 shots made a single half inch hole but then my shooting table seemed to move on my 5th and 6th shot making me use a slightly different hold and I believe this caused these 5th and 6th shots to drop a bit. Based on my first 4 shots I expect the Umarex Strike Point .22 Caliber Pellet Pistol to shoot consistent half inch groupings from 30 feet away especially once you get use to the trigger and sights. The shots where all a bit low but this is not a problem since the rear sight on the Umarex Strike Point .22 Caliber Pellet Pistol is adjustable for windage and elevation.

All in all the Umarex Strike Point .22 Caliber Pellet Pistol is a nice target and even small pest control air pistol for at least closer up shooting. The trigger is not as light as the Crosman series but it works just fine. If you want something a little more up to date than what Crosman is offering in a bolt action multi-pump Pellet Pistol then you may want to consider the Umarex Strike Point .22 Caliber Pellet Pistol as an option.

Categories: .22 cal, Field Test, Multi-pump, Pellet, Pistol, Review, Single Shot, YouTube Video Tags: Umarex, Strike Point

Which is Better - Plastic or Metal Airguns?

No Comments

We often think that something that is more expensive and perhaps built with what we consider to be better materials is going to be the best option. That's not always the case! In this Vimeo Video I talk about some of the Pros and Cons to buying a Plastic Airgun versus a Metal Airgun. Of course this applies to BB, Airsoft and Pellet shooters.

Price
In most cases a Plastic Airgun is going to be less expensive, so if you have limited funds then your only option may be a Plastic Airgun and at the end of the day both airguns are going to probably get the job done much the same.

Realism
Generally speaking, most Metal Airguns are going to have more moving parts, often times with working slides and even blowback operation. This is not always the case but even a Metal Airgun that has few working parts will still feel more realistic simply because of the additional weight to the Airgun. Metal has that cold hard feel to it that makes you feel like you're holing something of substance. Plastic Airguns on the other hand can feel light and cheap and usually are very simple in design with less working parts.

Shooting an Airgun with blowback operation simulates the recoil action and in many cases allows for true single action operation of the trigger and hammer. This is going to feel a lot more realistic than shooting a non-blowback Airgun which again is generally what you get with Plastic Airguns.

Durability
Most people assume that because an Airgun is Meta, it is going to be stronger and more durable. This would be true if the Metal used in the Airgun was actually hardened steel but with almost Metal Airguns, they are made using a zinc alloy metal (Pot Metal) that is much softer then hardened steel and can wear and break a lot easier. When you also consider a Metal Airgun is going to be a lot heavier than a Plastic Airgun, a drop onto a hard surface will have a lot more impact which can cause breakage a to a heavy Metal Airgun versus a Plastic light weight Airgun.

Plastic surfaces are also a lot less prone to showing scratches since the Plastic material will usually be black all the way through versus a Metal Airgun that has a painted surface that when scratched hard enough will show through right to the bare metal. You also get wear marks on painted Metal Airguns that will make it look used and older, some people like this look but other do not.

Reliability
Again people are going to assume a Metal Airgun is going to be more reliable simply because it has more metal parts and metal parts are stronger right? Not the case if the parts are made out of zinc alloy. Now some companies will upgrade some high use parts in Airguns to hardened steel but it's hard to know for sure. You can use a magnet to determine what parts are Metal and what parts are hardened steel.

As we mentioned before, Plastic Airguns are generally pretty simple in design, less working parts means less to go wrong at the end of the day so just because you have a Plastic Airgun it doesn't mean it's going to break on you quickly. Actually it may even outlast your Metal Airgun since all those working parts will eventually wear out.

Now I am the first person to admit that I prefer Metal Airgun over Plastic Airguns, I don't mind spending the extra money for more realism and I'm willing to accept the fact that it's not going to last forever but the fact remains, a Plastic Airgun does have some advantages going for it so don't rule them out completely.

Categories: 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, CO2, Comparison, Full Auto, Pellet, Pistol, Q&A Video, Revolver, Rifle, Semi Auto, Single Shot, YouTube Video Tags:

The Best Way to Hold Your Airgun

No Comments

I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.

More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.

In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.

Categories: Airsoft, BB, Break Barrel, CO2, Blowback, How To, Non Airguns, Paintball, Pellet, Pistol, Real Gun, YouTube Video Tags:

KJWorks M700P Gas Bolt Action Airsoft Rifle Table Top Review

No Comments

Type: Airsoft Rifle.
Manufacturer: KJWorks.
Model: M700P.
Materials: Metal with textured synthetic stock.
Weight: 7.8 pounds (3600 grams).
Barrel: Smooth bore barrel.
Propulsion: Gas operated (Green Gas or propane).
Action: Bolt..
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 10-11 round metal magazine.
FPS: Up to 550fps.

Trigger Pull: the trigger on the KJWorks M700P Gas Bolt Action Airsoft Rifle is what you would expect from a bolt action style hunting/sniper rifle. The working of the bolt does most of the work for your trigger finger so all that is required is the release of the firing pin from a very short and light tigger.

Accuracy: Checkout my full field test shooting video for the KJWorks M700P Gas Bolt Action Airsoft Rifle to see how it performed in detail. I did only shoot it inside the Sea Can shooting range since the weather outside this time of year is not favorable especially for gas guns so I was limited to ab out 30 feet, perhaps I can retest the KJWorks M700P Gas Bolt Action Airsoft Rifle outdoors at longer ranges when the weather is better. That said the KJWorks M700P Gas Bolt Action Airsoft Rifle did shot about a 1.5 inch shot grouping and averaged about 400 fps using .20 gram Airsoft BB's.

Build Quality: The KJWorks M700P Gas Bolt Action Airsoft Rifle is well built all around and the fit and finish feel good. all the mechanical parts functioned without any problems and I do like the textured stock and nice rubber butt pad. I did notice a couple of spots on the textured stock where it there where cosmetic imperfections, perhaps this is form the moulding of it?

Realism: The KJWorks M700P Gas Bolt Action Airsoft Rifle is based around the Remington 700 platform which looks like your standard high powered hunting rifle. The Airsoft version looks and functions just like the real deal since we are using Green Gas rather than a spring making the bolt easy and smooth to operate.
Available From: The Replica Airguns Store.

Pros:

  • Bolt is super easy to use compared to a Spring style bolt action Airsoft rifle.

  • Textured stock feels great.

  • Lots of sight option with the built in scope rail and removable adjustable iron sights.

  • Ready for Bipod or sling.

  • Full size drop out metal magazine that holds the Gas and Airsoft BB’s.

  • Easy to adjust Hop-up screw.

Cons:

  • FPS was a little bit lower than expected.

  • Was not able to get 11 rounds into the magazine.

  • Some imperfections on the textured stock.

Comments:
I have revised a couple of spring bolt action Airsoft rifles in the past and although it's nice that all you need is a bag of Airsoft BB's and your ready to shoot, having the Gas operation makes the bolt so  much easier to operate allowing for much quicker follow up shoots. The more time you have to acquire your next target and make the shot can make all the difference when your enemy is closing in. The KJWorks M700P Gas Bolt Action Airsoft Rifle is a nice ready to shoot out of the box Airsoft rifle that if you want to can be customized pretty easy with a bipod or scope which I would recommend since not only will this make the KJWorks M700P Gas Bolt Action Airsoft Rifle look a lot better but also way more practical.

My YouTube Table Top Review Video for the KJWorks M700P Gas Bolt Action Airsoft Rifle:

Categories: 6mm, Airsoft, Gas, Review, Rifle, Scope, YouTube Video, Single Shot Tags: KJWorks, M700P

KJWorks M700P Gas Bolt Action Airsoft Rifle Field Test Review

No Comments

I'm trying to remember if I have ever reviewed a Gas Operated Bolt Action Airsoft Rifle before or not? I know I have reviewed Spring Operated Bolt Action Airsoft Rifles but I think this is a first for me. With Spring Bolt Action Airsoft Rifles there is some work involved in the back and forth movement of the bolt since the power is coming from the spring tension, compared to a Gas Bolt Action Airsoft system there is virtually no resistance in the bolt so you can get off your follow up shots a lot quicker.

I would like to get out and test the KJWorks M700P Gas Bolt Action Airsoft Rifle at a much longer distance than here in my Indoor Sea Can Airgun Range but the weather outside right now is kind of cold and wet. Perhaps in the summer I can do a revisit of the KJWorks M700P Gas Bolt Action Airsoft Rifle and test it out at a much longer range using heavier Airsoft BB's.

For this indoor short range testing I used .20 gram Plastic Airsoft BB's and placing 5 shots through my Chrony Chronograph I got a an average of 382 fps. The gas magazine was fully topped up using propane gas and the temperate was around 15 degrees Celsius (60 degrees Fahrenheit).

Again using .20 gram Plastic Airsoft BB's I then performed my close range accuracy test (about 30 feet away) and the KJWorks M700P Gas Bolt Action Airsoft Rifle shot about a 1.5 inch grouping with one outlier that went kind of low, perhaps a bad Airsoft BB? With most sniper style Airsoft rifles you will want to use heavier gram Airsoft BB's which should help with accuracy so I would expect the KJWorks M700P Gas Bolt Action Airsoft Rifle to tighten up a bit using a .30 or higher gram BB.

I was surprised at how quiet the KJWorks M700P Gas Bolt Action Airsoft Rifle was and didn't mind the peep sights after some getting use to. I would recommend adding a 3 power or higher scope to the included scope mount. Throw a Bipod on the KJWorks M700P Gas Bolt Action Airsoft Rifle and you have yourself a nice sniper rifle setup indeed.

Categories: 6mm, Airsoft, Field Test, Review, Rifle, Single Shot, YouTube Video, Gas Tags: KJWorks, M700P

SHOT Show 2018 Sig Sauer Interview

4 Comments

Sig Sauer Logo Black.jpg

This year at SHOT Show 2018 I had the please of again interviewing Dani Navickas from Sig Sauer. Dani Showed me several new pistols and a new break barrel rifle Sig Sauer is offering this year. The Sig ASP20 Break Barrel rifle will come in both .177 and .22 caliber pellet shooting versions. The ASP20 has a lighter than most cocking effort of only 33 pounds using their proprietary GlideLite system, along with an adjustable ASP MatchLite trigger.

Another Target pellet airgun from Sig Sauer this year is the .177 caliber pellet shooting Super Target, styled after the Sig Sauer P210 firearm. The Sig Super Target is a single pump pneumatic single shot pistol designed for 10 meeter shooting with adjustable sights and a crips short light trigger.

Sig like several other companies has rebranded their own version of the KWC 1911 CO2 Blowback BB pistols. The Sig Sauer licensed BB 1911 is based on Sigs We the People line to celebrate the American people and their Constitution.

Another new Blowback Pellet firing Sig Sauer Air Pistol was also introduced at SHOT Show, the Sig Sauer X-Five. The X-Five uses their 20 round belt fed magazine and also has Sig's Cam Lever CO2 loading mechanism. You will also find a rear adjustable sight on the Sig Sauer X-Five Pellet Pistol.

Last but not least and perhaps one of the most interesting new products coming out later this year from Sig Sauer is the P320MHS APS which is another new rotary magazine Blowback Pellet Pistol. What's a bit different with the new Sig P320MHS is that it has a full size drop out magazine that holds the CO2 and belt fed pellet magazine. The P320MHS can also be fully field striped, has an open ejection port and is styled after Sig's real Steal M17 firearm.

Categories: 4.5mm / .177 cal, .22 cal, Airgun News, BB, Blowback, Break Barrel, CO2, Pellet, Replica Airguns News, Rifle, Semi Auto, YouTube Video, Spring Piston, Single Shot, Pistol Tags: Sig Sauer, Sig Sauer ASP20, Sig Sauer Super Target, Sig Sauer We the People 1911, Sig Sauer X-Five P226, Sig Sauer P320MHS

Umarex Walther PPQ M2 .43 Cal. Paintball Pistol Field Test Review

2 Comments

It was fun to shoot the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol for a change but really it was a lot like shooting one of my BB and Airsoft pistols, except in this case I was shooting .43 caliber rubber balls. I decided to not use paintballs inside my nice new Sea Can Indoor Airguns Shooting Range to keep things clean :)

First, I put three rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the lighter paintballs. Using a brand new CO2, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol average 316 FPS which was high than the claimed 290 FPS!

Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. I was not expecting anything close to what I would get with a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly it is much less noticeable.

I know some of you are going to ask about using the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is persistent on hurting you. There is simply not enough stoping power here. Will it "sting like a bitch" if you get shot up close with one of these Umarex Walther PPQ M2 .43 Cal. Paintball Pistol? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.

As a paintball pistol, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is about the best I have seen in terms of replica paintball guns. It is as good as they come for realism, even better than many BB and Airsoft guns and in terms of performance it did not let me down either.

Buy in the Canada Replica Airguns Store or the US Replica Airguns Store

Categories: .43 cal, Blowback, CO2, Field Test, Paintball, Pistol, Review, Semi Auto, YouTube Video Tags: Umarex, Walther PPQ M2

Umarex Walther PPQ M2 .43 Cal. Paintball Pistol Table Top Review

2 Comments

Type: Paintball Gun.
Manufacturer: Umarex - T4E.
Model: Walther PPQ M2.
Materials: Metal & Polymer.
Weight: 848 grams (1.87 pounds).
Barrel: Smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi-Automatic with blowback action.
Ammo Type: .43 Caliber Paintball or Rubber Ball.
Ammo Capacity: 9 Rounds.
FPS: 290.

Trigger Pull: The trigger pull on Umarex Walther PPQ M2 .43 Cal. Paintball Pistol feels a lot like a double action trigger, internally it may be striker fired so expect a bit of a longer trigger pull with a fairly long reset and a medium strength trigger weight. There is also a working trigger safety which works well.

Accuracy: So far I have not had the opportunity to test the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol out so stay posted for a future Field Test Shooting video where I will see what kind of fps and accuracy we can expect form the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. So far all I have to go on is what I have seen in some other video reviews I have watched, for the most part the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol performed well.

Build Quality: The build quality of the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol a nice near 2 pounds (1.87 pounds) of weight with the magazine in which makes the Paintball version a little heavier than the real still version (1.53 pounds) but once the real steal version is loaded with a full mag this may even out a bit. The Walther PPQ M2 does have a polymer frame but again this is normal with todays modern guns and helps keep the weigth down. Fit and finish is also excellent.

Realism: The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is a near perfect replica of the real steel Walther PPQ M2, form the fully licensed markings to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version I doubt you could tell them apart? You will find that the slide cycle distance is a bit shorter than it shoudl be meaning that when the side catch is engaged the slide does not go as far back as it should. Filed stopping the Walther PPQ M2 .43 Cal. Paintball Pistol may requires some tools.

Purchase it from: The Canada Replica Airguns Store or the US Replica Airguns Store

Pros:

  • Really great weight and solid feeling gun.

  • Full Metal slide that locks back on the last shot.

  • All metal heavy full size drop out magazine adds some additional weigth to the gun.

  • Very Accurate Walther PPQ replica, almost indistinguishable from the real still version.

  • Everything works pretty much like the real gun so a great training tool.

  • Adjustable yellow dot sights.

  • Working trigger safety.

  • Fit and finish is excellent.

  • Magazine spring release really shoots the magazine out.

  • Love the .43 caliber barrel opening, adds to realism.

Cons:

  • Trigger pull seems a bit long as it shoots like a double action trigger, may be striker fired internally?

  • Magazine only holds 9 rounds, so you are going to need extras.

  • Blowback action is not full blowback, more like a typical BB airgun.

Comments:

I'm really glad to see another Replica Paintball Pistol available in Canada, especially such a well made and realistic version. The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol looks to be perhaps the best to date .43 caliber Paintball gun on the market and may even prove to be an option for non-lethal personal defense when using rubber balls with it. Not that I would trust my life with it but it sure looks the part and I am sure most people would not want to be on the receiving end of 9 rounds coming at you. As a training tool and Paintball gun the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol offers superb realism for this purpose. I am looking forward to testing mine out shortly :)

Buy in the Canada Replica Airguns Store or the US Replica Airguns Store

Categories: .43 cal, Blowback, CO2, Paintball, Pistol, Review, Semi Auto, YouTube Video Tags: Umarex, Walther, Walther PPQ M2