Type: Multi-pump Pellet-BB rifle. Manufacturer: Umarex USA. Model:NXG APX. Materials: Metal and polymer parts. Weight: 3.4 pounds (1.54 kg). Barrel: 20 inches, rifled. Propulsion: Multi-pump. Action: Single shot pellets/repeater BB's. Ammunition Type: .177 caliber pellets & 4.5mm steel BB's. Ammunition Capacity: 75 BB's in hopper. FPS: up to 490.
Trigger Pull: The trigger pull on the Umarex NXG APX Multi-pump Pellet-BB Rifle is not too bad, I would not say it's overly light but not on the heavy side either. Essentially it has a single action trigger since you need to pre-charge the bolt to engage the trigger. There is a little bit of take-up and then a fairly noticeable break point where you will feel the most trigger weight right before it releases.
Accuracy: So far I have not performed my Field Test Shooting review for the Umarex NXG APX Multi-pump Pellet-BB Rifle so I do not have any velocity or accuracy information to share at this point. I do plan on making that Shooting video Review this week so stay posted for that one.
Build Quality: The Umarex NXG APX Multi-pump Pellet-BB Rifle is not going to be one of your highest quality airguns but it does get the job done and feels solid enough with all the working parts feeling tight and secure. Most of the Umarex NXG APX Multi-pump Pellet-BB Rifle is plastic, even the bolt and trigger but you will find more metal inside where it counts like the inner steel barrel and the outer steel barrel shroud. The stock is plastic and that's OK, I do like the addition of the rubber butt pad and cheek rest as they work well and help to make the Umarex Umarex NXG APX Multi-pump Pellet-BB Rifle feel comfortable to hold in position and shoot.
Realism: Since the Umarex NXG APX Multi-pump Pellet-BB Rifle is not a replica, realism is not really a factor here but it does look like a gun so treat it as if it was a real gun since most people will not know the difference. Always transport and store any airgun safely and discreetly.
Pros:
Low cost air rifle with a lot of features.
Iron sights actually look really usable with the fiber optic red dot up front.
Comes with an 4x15 optical sight which should help with accuracy at longer ranges.
Super easy to pump even when getting close to the 10 pump max.
Built in auto safety.
Stock and cheek rest position feel really good.
Choice of shooting pellets or BB’s.
Trigger feels pretty good, not too heavy.
Mostly an ambidextrous design so good for lefties too.
Has a rifled barrel.
Overall a good looking air rifle.
Cons:
Mostly plastic, not the highest quality build.
Included 4x15 scope is super low budget but will work till you can upgrade it down the road.
Comments: I really hope the Umarex NXG APX Multi-pump Pellet-BB Rifle shoots well as it is kind of a cool air rifle with a lot of features at a low price tag and would make a great little target and maybe even small pest air rifle if it turns out to be accurate and hit that near 500 fps mark with pellets. The Umarex NXG APX Multi-pump Pellet-BB Rifle is not going to win any quality or design awards but from a usability stand point it works well and feels good to hold and shoot, the rear stock and cheek rest are in a perfect piston for me and this is a pretty small airgun overal. Personally I would invest in an upgraded scope, something like the Walther 4x32 would be perfect and not too expensive.
Type: Break barrel pellet rifle. Manufacturer: Umarex USA. Model:Ruger Explorer. Materials: Metal and polymer parts. Weight: 4.45 pounds (2.5 kg). Barrel: 12 inches, metal rifled. Propulsion: Spring piston. Action: Single shot. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 1. FPS: 495.
Trigger Pull: I found the Ruger Explorer Youth Break Barrel Pellet Rifle to have a fairly light trigger, there is some initial take up with a smooth almost undetectable break or release point, I found that as I shot the Ruger Explorer Youth Break Barrel Pellet Rifle the trigger seemed to be breaking in a bit which made it a bit hard to figure exactly when the trigger was going to release but I feel over time and once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in the trigger will become more predictable.
Accuracy: Since I have already made a shooting or field test video for the Ruger Explorer Youth Break Barrel Pellet Rifle, I can comment on its performance n this review! With 6 grain lead pellets (on the lighter side), I was able to get a 5 shot Chronograph average velocity of 485 fps. Using heavier 7-8 grain pellets the velocity slowed down a bit to around 400 fps. In terms of accuracy the Ruger Explorer Youth Break Barrel Pellet Rifle performed well getting about a 1 inch 10 shot grouping on my paper target setup 30 feet down range. I know the Ruger Explorer Youth Break Barrel Pellet Rifle can do better than this once the trigger settles down a bit since some shots went off unexpectedly.
Build Quality: The Ruger Explorer Youth Break Barrel Pellet Rifle is not an expensive air rifle and is more or less an entry level spring piston pellet shooter. That said it is built fairly well with a metal receiver, barrel and trigger setup. The modern looking stock is polymer and the steel barrel is coated in a synthetic soft plastic to help with long term durability. The real fiber optic sight is plastic so you will have to be careful with it as it does protrude a bit from the air rifle.
Realism: Since the Ruger Explorer Youth Break Barrel Pellet Rifle is not a replica realism is not really a factor here but it does look like a gun so treat it as if it was a real gun since most people will not know the difference. Always transport and store any airgun safely and discreetly.
Pros:
Really great looking air rifle with a modern look to it.
Finish is very durable with its polymer stock and plastic/rubber coated barrel.
Fully adjustable fiber optic sights are easy to sight in and use.
Receiver is notched for ring mounts so you can add an optical sight or red dot to it.
Trigger is fairly light, just need some break in time with it.
Cocking effort is fairly easy at 16.5 pounds.
Great size gun for all ages.
Power and accuracy were good for an entry level air rifle.
Cons:
I did find the trigger break/release point to be a bit unpredictable but I feel this is a break-in issue and will become more consistent over time.
You have to remember to push that safety in with ever shot.
Comments: The Ruger Explorer Youth Break Barrel Pellet Rifle is marketed as a Youth air rifle but in reality it would be great fun for all ages. I am a fairly large person at 6 feet tall and I had no problem dealing with the slightly shorter configuration. The trigger guard is nice and open and allows for large fingers which is not always the case with airguns designed for smaller individuals. The overall quality you get with the Ruger Explorer Youth Break Barrel Pellet Rifle for the lower entry level price tag is very good and in terms of performance I feel you for sure get your monies worth with the Ruger Explorer Youth Break Barrel Pellet Rifle.
I don't do a lot of Springer (Spring Piston) Air Rifle shooting tests or even reviews for that matter. Mainly for a couple of reasons: Number 1, my content is mostly focused around Replica style Airguns and Number 2, it's kind of hard to test out the longer range airguns in my 30 foot airgun range. That said I felt the Ruger Explorer Youth Break Barrel Pellet Rifle would be a really great airgun to review since it is both affordable and even though it is targeted for the youth market, it really does make a great shooter for all ages.
I have not done a Table Top Review for the Ruger Explorer Youth Break Barrel Pellet Rifle but plan to shortly so stay posted for more detailed info on the Ruger Explorer Youth Break Barrel Pellet Rifle down the road in that review.
So how'd we do during my Field Test Shooting Video for the Ruger Explorer Youth Break Barrel Pellet Rifle? Not bad I would say! Using about 6 grain rather light weight .177 caliber lead pellets I was able to get really close to the 500 fps claimed fps mark coming in just under at a 5 shot testing average of 485 fps. I did put a couple heavier grain pellets through my Chrony Chronograph and got closer to the 400 fps mark, still not bad for this lighter sprung spring piston air rifle.
In terms of accuracy, shooting at my paper target setup 30 feet down range in my Sea Can Airgun Range, I shot about a 1 inch 10 shot grouping. I was finding the trigger break-in to be a bit unpredictable during this testing which led to some premature shots going off so I do feel once the Ruger Explorer Youth Break Barrel Pellet Rifle is broken in and me getting use to the trigger break, I should be able to improve on this result.
Overall the Ruger Explorer Youth Break Barrel Pellet Rifle is a really nice entry level airgun perfect for all ages and not just the youth market. It looks really cool, is easy to cock and has a very resilient finish. Oh ya it shoots pretty good to!
Yet another retest for an airgun I have already reviewed. But some airguns need another "shot"! Today I just kind of felt like shooting a springer and the Baikal MP-53M Break Barrel .177 Pellet Air Pistol came to mind. I'm not the best at shooting spring pistons airguns since they take a more softer relaxed grip and I tend to hold guns with a bit of a firmer grip.
As always in my new Sea Can Shipping Container I perform a Chronograph velocity test to see what the real world feet per second is and then I perform a followup accuracy test shooting 10 rounds at a paper target 30 feet down range using a rested seated position. During the velocity Chrony test for the Baikal MP-53M Break Barrel .177 Pellet Air Pistol I was able to get an average of 405 fps which was much higher than my previous testing where I averaged 319 fps. I was using different 7 grain lead pellets but I don't think they where that much different in weigth since the Diabolo pellets should have been around 6-7 grain.
Moving onto the accuracy portion of my Field Test review, this time around my shots stayed a little tighter than last time stretching out to about 2 inches but most of the 10 shots where all within 1 to 1.5 inches. The trigger on the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is really great, super light with just a little take-up and virtually a hair trigger after that with zero friction.
I also wanted to mention that cocking the Baikal MP-53M Break Barrel .177 Pellet Air Pistol is fairly easy and that I did find I needed to set the rear sigh to the all the way down position to get my shots to hit close to the bullseye as this gun seemed to like to shoot rather high out of the box.
The Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a really nice evolution to the already existing line of Sig Sauer ASP Pellet Pistols. The 30 round belt fed pellet magazine is what really sets it apart from the Sig ASP P250 and Sig ASP P226 which both share the traditional double sided 8 round rotary pellet magazines found in other CO2 pellet pistols like the Umarex PX4 and ASG CZ P-09 Duty.
The big question I had was how is the trigger going to feel and is a 30 round belt magazine going to be reliable? Will other aspects of the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol function and perform like its rotary magazine brothers?
During my Chronograph feet per second shooting test I compared all three blowback pellet pistols shooting five rounds from each of them using a brand new CO2 and Sig Sauer 5.25 grain Match Ballistic Alloy Pellets. It was a close race with the Sig ASP P250 averaging 413 fps, the Sig ASP P226 just under with a 409 fps average and the Sig ASP P320 coming in a very close third at 405 fps. Only about 8 fps separating all of them!
Moving on to the target portion of my testing. As per my standard Field Test Shooting Reviews I setup my paper targets about 30 feet from my rested shooting position and since the ASP P250 and P226 both have 8 rounds per side rotary magazines I decided to shoot an 8 round grouping with all three Sig ASP pellet pistols. It was really close and perhaps one could say most of the variability was because of the human factor. All three CO2 Blowback Pellet Pistols shot about 2 inch groupings with perhaps one or two outliers, again most likely my fault :) I would say the Sig Sauer ASP P250 was perhaps the most accurate with the tightest of the three groups and also the most centered. The Sig Sauer ASP P226 and Sig Sauer ASP P320 where both a close second with both of them shooting just a tad left on target but pretty close to the center.
What about that Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol trigger and belt fed magazine? The trigger actually felt great, much lighter than I was expecting and I did not have one pellet feed error during my entire testing. At the end of the day all three Sig ASP pellet guns performed about the same, but I have to say having 30 rounds at your disposal without having to reload or rotate the stick mag really makes the Sig ASP P320 stand out and perhaps make it the winner in a very close contest.
Type: Air Pistol. Manufacturer: Sig Sauer ASP Model:Sig Sauer ASP P320. Materials: Metal and plastic build. Weight: 1.81 pounds (821 Grams). Barrel: 4.75 inches - Rifled steel. Propulsion: 12 gram CO2. Action: Blowback single and double action. Ammunition Type: .177 caliber pellets and 4.5mm Steel BB's. Ammunition Capacity: 30 round belt fed stick magazine. Max FPS: 430.
Trigger Pull: The trigger pull on the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a lot better than I thought it was going to be considering each time you pull the trigger it has to advance the 30 round belt fed magazine and cock the internal hammer since it is double action only. The blowback operation is really only for show and feel since it does not cock the hammer for a more single action type trigger pull. You can expect a fairly long trigger pull because it is double action only but overall it is not too heavy.
Accuracy: I have not done my official Field Test Shooting Video for the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol but hope to have it done shortly. Since I also haven't really done an official shooting test for the Sig Sauer P350 and P226, I figure I will test out all three of them at the same time.
Build Quality: The Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a bit heavier (closer to 2 pounds) than the P250 which hits the scale at only 1.5 pounds , this does make the Sig Sauer P320 feel a bit more solid in the hand. The Sig Sauer P320 has a metal slide and polymer frames similar to the real steel version which gives it authentic weight, balance and handling. Sig claims that their entire APS line of pellet guns is life tested for 15,000 shots so you know this gun is going to last and provide years of shooting fun. The fit and finish seem really good, so far no real paint or finish problems and all mechanically everything is operating as it should.
Realism: The Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol is a very close replica of the real steel Sig Sauer P320. The hammer, slide catch release and take down leaver are purely for show with the hammer being moulded into the slide and frame. One slight disappointment for me is when a gun does not have a cut out ejection port, that is also the case with the otters ASP Sig Sauer airguns like the P226 and P250 but it does not take away from the shooting fun in any way.
Good overall replica of the real steel Sig Sauer P320.
Designed by Sig Sauer and made in Japan, fully Sig Sauer licensed.
Should have nice heavy blowback operation like the ASP P250 and P226.
Has better weight than the P250, almost half a pound heavier.
White dot sights for easy target acquisition and accessory rail for add ons.
Super high capacity 30 round belt feed magazine.
Decent feel to the trigger not heavy or as sticky as I thought it might be having a 30 round belt fed magazine.
Cons:
Hammer is moulded into the slide and frame, does not function at all.
Sight are non adjustable.
Ejection port is not cut out and there is no working slide catch.
Comments: I was happy when Sig Sauer released their ASP Sig P250 and P226 CO2 Blowback Pellet Pistols with their 16 round double sided stick magazines like we have seen in several otters CO2 Pellet Pistols. But I love the introduction of the 30 round belt fed magazine. I am hoping the belt fed magazine performs while actually shooting pellets as good as it feels when dry firing it, I guess we will have to wait and see when I do my Field Test Shooting Video :) Overall the new Sig Sauer ASP P320 Pellet Pistol looks to be an upgrade of sure to the P250 in terms of improved weight and a higher capacity magazine.
My Vimeo Table Top Review of the Sig Sauer ASP P320 CO2 Blowback .177 Caliber Pellet Pistol:
For my first official Field Test Shooting Video I test out the Crosman American Classic P1322 22 Caliber Pellet Pistol! Perhaps I should start calling these videos Sea Can or Shipping Container Shooting videos? Anyway, like always I put some rounds through the Chronograph to see what kind of real world fps I get from the Crosman American Classic P1322 22 Caliber Pellet Pistol. You will all be happy to know the Chrony is working really well in its new home. I played around with it a bit and found that using the light kit I bought gets me very consistent fps readings :)
Since the Crosman American Classic P1322 22 Caliber Pellet Pistol is a multi-pump airgun there is no real need to shoot more than 3 or so shots, after all there is a fair amount of pumping involved. After three consistent test shots the variation was only about 2 fps apart coming in at an average of 491 fps using Crosman flathead pellets that I would say are around 12-13 grain in weight. Just for fun a did a half pump only cracking the Crosman American Classic P1322 22 Caliber Pellet Pistol 5 times to see what a half power shot would result in and it did scrub off about 200 fps, still good enough for target plinking.
Next up I performed my accuracy test shooting from close to 30 feet back on a paper target using a rested position, (sitting in the back with my hands resting on a sand bag). Still a bit of human factor involved but stable enough to get a good idea of the accuracy for the Crosman American Classic P1322 22 Caliber Pellet Pistol. I had a bit of a camera technical problem so I ended up performing this test twice, the first time I got about a 3/4 inch 5 shot group. The second time I rushed it a bit and ended up widening out the group a little.
Overall the Crosman American Classic P1322 22 Caliber Pellet Pistol is a really great target and even small pest close range pistol that you can pickup at a very affordable price. I really wish we carried a few of the Crosman airguns, at least ones like this, perhaps down the road...
Well the Shipping Container Office and Airgun Shooting Range is finally all ready to use and so for this first ever airguns shooting video in it, I simply wanted to try out a couple of airguns and see how this new setup worked. I also wanted to play around with some camera position setup to see how it all looked and if there will be any additional lighting or placement considerations.
Summer is here! While some folks are working on a tan, you're out working on your aim. This weekend, stock up on all the essentials — ammo, CO2, targets, extra mags — so you can shoot until the sun goes down.
When you spend $50 or more on any items, we'll ship them to you for free! Ends Monday, so don't wait.
I got a lot done this week in the Shipping Container Project Office and Airgun Shooting Range. Finished up all the drywall office mudding, I primed and painted the the office, connected up all the electrical and office lighting and installed the hardwood and baseboard along with the trimming. All that's left in the office is some caulking, paint touchup and then I have to figure out how I'm going to finish up the shooting hole? I do have some ideas for it though...
Next week I will be working on these odds and ends and hopefully may even get the shooting range spray foam insulted?
About three weeks ago I started the interior construction of the Shipping Container Project. So far I have cut out the window and door, framed the office in, installed the window and door, done some preliminary painting, wired in electricity for the entire unit, added an internet line, run underground wiring to the main house, installed insulation and vapor barrier and last but not least, added the drywall. I would have to say the worst is over and now I look forward to more of the finishing work like painting, flooring, connecting the electrical plugs and lighting fixtures.
The only real big jobs left to do would be painting the outside of the Sea Can and spray foam insulating the shooting range area but the spray foaming I will be contracting out and getting it done professionally so that part will be easy at least!
Yup, another Shipping Container Project Update Video! For those of you interested in this project I am sure you have been waiting with baited breath ;) And for those wanting more airgun videos you are probably wondering when I will resume making more... Heck, I'm with you on that one, this manual labour stuff is way harder than making airgun videos, but it is all for the greater good. I will try and slip in some airgun related videos before this Shipping Container Project is finished, that's almost a promise!!!
At this point I am almost ready for drywall, all the electrical is completed including running the power and Internetunderground to the poorhouse and main house. I need to have my Internets at full jam, that's a must!
This week I will be getting the electirfcal all hooked up to the main box, adding isulation and vapour barrier, some more window baar cleanup and painting and by end of the week I hope to have the drywall in place along with the taping and first layer of mud.
Oh yah, this video also includes a huge bonfire, every spring and fall we usually burn all the fallen branches and yard debris, everyone comes out and enjoys the huge fire :)
The Shipping Container Project is moving along nicely, this past week I finished up my office area framing, I also got the door and window cutout and installed! Next up on my list is cleaning up and painting the window bars so I can make the unit a bit more secure. I suppose I will have to do the same with the metal door since it is in dire need of a facelift. Once the doors and windows are all taken care of I will be moving on to the electrical and wiring. My goal is to get all of this done by end of week... The sooner I get this Shipping Container Project done the sooner I can get back to making even better and more consistent airgun videos in my new home.
This week I started framing in my new office and in this video I show the wall closest to the airgun range where the door and shooting opening are situated. I managed to frame the back wall in too. I also talk about how much time it takes even before you pick up a drill or hammer simply planning everything out and acquiring all the supplies required for a project like this. I have spent a ton of time researching what I need to make this Shipping Container Project into the vision I have for it. Spoiler alert, in my next video the framing is all done including the installation of my window and outside door, glad that part is over!
No need to hunt for deals this Easter, EVERYTHING in our store is on sale! So kickoff your long weekend with a long-barreled revolver. Celebrate spring’s arrival with a spring powered sniper rifle. Or treat yourself to a hollow chocolate bunny and some hollow point pellets. This deal ends soon, so hop to it!
Trigger Pull: Trigger pull on all the Umarex Single Action Army BB and Pellet Revolver is really great. Being that these Single Action Army Revolvers are single action only, most of the work is done while you pre-cock the hammer with your thumb. The trigger single action pull is under 2 pounds and has virtually no take up with a crisp release. I love the ratcheting sound of the cylinder as you pull back the hammer just like using a real SAA Revolver!
Accuracy: I have not yet tested the Umarex Colt Single Action Army Nickel & Gold Pellet Revolver so far but expect it to perform very similarly to the 4.5 inch barreled pellet shooting version I tested a while back. On that Field Test Shooting review I was abel to get pretty close to the claimed fps with an average of 378 fps. During my accuracy portion shooting from 30 feet back onto a paper target I got a very respectable .75 inch 6 shot grouping using a semi rested position. I do expect the slightly longer barrel on the Nickel and Gold version to perhaps improve fps slightly.
Build Quality: All of the Colt Single Action Army BB and Pellet Revolvers have a mostly all metal construction other than the plastic grips and any seals. The fit and finish is excellent with a great overall weight in the hand. The mechanical action of the hammer and trigger feels just like it would on a real single action army revolver. I really like the two tone nickel and Gold finish on this longer barreled SAA revolver.
Realism: In terms of replicating a real steel Colt Single Action Army Revolver, again these Umarex old west 6 shooters are absolutely amazing replicas. It's really hard to tell the airgun version apart from the real steel version, with the exception of the smaller diameter shells and the discreet safety switch located under the frame. Even the barrel is nicely recessed and has some fake rifling twists in it to give the appearance of a large caliber barrel opening. The CO2 is well hidden with the Allen key built into the handle so no ugly CO2 screw tab hanging down.
Longer barrel is unique and should get a bit higher fps than the standard shorter barreled versions.
Cons:
A lot more expensive than the standard barrel length in standard finishes.
Real version would shoot 45 caliber, dummy shells are actual closer to 357 so a bit smallish.
The safety in all of these ghost is really firm and hard to change.
Comments:
We have pretty much established that these Umarex Colt Single Action Army pistols are fantastic airgun copies of the old west real steel 6 shooters in pretty much every way. For this reason they have been super popular! The Umarex Colt Single Action Army Nickel & Gold Pellet Revolver is yet another rendition of this same airgun but with a longer barrel and the tow tone Gold and Nickel finish. You will pay a bunch more for the longer barrel and two tone finish, is it worth it? If your on a budget perhaps not but if you want something that really stands out and may even perform just a little better than pony up the extra bucks and pick one of these beauties up.
My Vimeo Table Top Review for the Umarex Colt Single Action Army Nickel & Gold Pellet Revolver:
Lately I have been doing a lot of sourcing out figuring out how everything is going to be laid out, what kind of lighting I want to use, how am I going to heat the office area in my shipping container. I want to keep everything pretty low power so my plan is to go with all LED lighting and a 400 Watt heater which should be
fine in my 90 square foot insulated office space. I plan to blast the shooting range with some propane heat on days when I need it for the shooting testing during the colder months.
I did pickup some hardwood flooring pretty cheap at Big Box Store and also got my 3x6 office window from Surrey New and Used. I already have metal doors that my father-in-law has had stashed away for several decades but at least now they are going to come in handy.
The first job or actual work I needed to do on the Shipping Container Project was to level and place the Sea Can onto some bricks/slabs, this also helps to keep the underside dry so it does not rust out. There shouldn't be much settling since the storage container is resting on my gravel parking area and the gravel goes right down about 1 foot deep to the hard pan.
Next on my list is starting the framing, figuring out exactly where the windows and doors will be and of course cutting the container to fit them.
This Vimeo video will be a little different than most, sorry no shooting and not even a single gun to show anywhere in this video! But it will lead to hopefully better shooting field test and table top videos down the road as I will have a dedicated space not only to work but to also shoot my review airguns.
Today, well actually yesterday a 40 foot shipping container (Sea Can) showed up at my house. This new metal box is going to be my airgun shooting range and office space combined. It will contain a 30 foot airgun shooting range closest to the rear doors so that I can open them and create a longer range if necessary. The front 10-12 feet of the container will be my work office space where. I will also use some of the container for storage.
Over the next few weeks I will be leveling the container, framing and insulating the office area, adding some electricity and lighting and of course completing some finishing work to the office space to make it more cozy. Eventually I hope to do some outside work giving the container some more curb appeal with a new coat of paint.
I plan to make more videos to share with everyone of the work progress as it happens so keep watching...
Last but now least to show you in this update video is the ASG CZ Scorpion EVO 3 A1. This product was developed by ASG in cooperation with CZ and is made to give the Airsoft Player the closest shooting experience they can possibly get to handling and shooting a real CZ Scorpion EVO 3 A1!
