In this Indoor Field Test Shooting Review, I put the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol through its paces and find out what we can expect in terms of power and accuracy by first averaging 5 shots through my Chronograph to see what the real world velocity is in fps. I then shoot 10 rounds into a paper target setup 30 feet down range to see if I can get a decent grouping somewhere near the bullseye out of the box. If you are looking for specification and details along with some closer up video of the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol then make sure watch my Table Top Review located here.
First up I performed the power test using .20 gram Airsoft BB’s. I put a brand new 12 gram CO2 in the pistol and averaged the first 5 shots which gave me a 318 fps average. The actual shoots were as follows: 331, 322, 315, 312, 308. I didn’t take notice of the temperature but in generally I keep my Sea Can at around room temperature so not overly warm or cold. There is a barrel extension that comes with this Airsoft Pistol which will give you a bit higher velocity when installed, but I did not test the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol with the barrel extension on it as mine was broken.
Moving on to the accuracy portion of the testing I setup a fresh paper target 30 feet away and put 10 rounds into it while sitting on a stool in the back with my hands resting on a sand bag up front. This gives me pretty good stability but is not perfect and there is always going to be some human factor that can effect accuracy a little bit. That said I did manage to get around a 2.5 inch 10 shot grouping with the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol that was pretty well centered hitting the target just a tad low and to the left but pretty close to center target.
All in all the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol did a good job once I took the broken off threads out of the barrel. The trigger is really nice on it, maybe even a bit light but you will get use to it over time. The blowback is snappy and the gun holds well in the hand, a real pleasure to shoot! I did notice the slide spring feels a bit weak when you release it as it does not snap into place with a lot of authority, but this does not effect the blowback action at all and the gun shot without any problems or hiccups. If you are looking for a quality Glock styled Airsoft Pistol then the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol would make a great option for sure.
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-13 TBC. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Total Length: 8.25 inches (210mm) Barrel: 3.7 inches (95mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SAO trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 22 round drop out full size metal magazine. FPS: Claimed 360+.
Trigger Pull: The trigger pull on the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is what you would expect from a true Single Action Only Trigger, which is nice and light and relatively short. There is some initial take up but you can feel the point near the back where the release kicks in which is extremely light and predictable with no play in it. Of course you will have to rack the slide in order to place a round in the breach and fire the first shot, after that the blowback action will do all the slide cycling for you.
Accuracy: At this point I have not shot the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol or made my Field Test Performance Video. I have already made a full Field Test and Shooting Video of the non-TBC version which is virtually the same Airsoft Pistol but without the threaded outer barrel extension. You can watch that Filed Test Video here where I get around 350 average fps and close to a 2 inch grouping shooting at a paper target setup 30 feet down range. Stay posted for my Full Field Test Shooting Video for the TBC version down the road.
Build Quality: The KJWorks line of Airsoft Guns is know for overall good quality so I expect the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol to be just the same. From my testing with the non TBC version and my initial first impressions, everything looks really good, fit and finish are excellent and as expected you will find metal parts and polymer parts in all the same places you would find them in a real steel modern semi auto pistol.
Realism: The KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not an exact replica of a specific semi auto pistol but you could say it looks a little bit like a Glock ;) You need to be careful when it comes to Glock as they do not like it when companies copy their guns and rightly so. There is enough differences with the KJ Works KP-13 TBC CO2 Blowback Airsoft Pistol so it should not set off any red flags over at Glock. It’s good that there are various color options, tan, grey and black. It does seem that only the Tan and Grey two tone versions are available in the TBC version while the black version we seem to have available in the all black non-TBC version.
Pros:
Metal and Polymer with decent weight and good feel to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out magazine that holds the CO2 and 22 rounds.
Well hidden safety incorporated into the serial number under the barrel.
Working trigger safety.
Super easy to see in all conditions fiber optic sight up front.
All working components like the real steel Glock styled pistol.
Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.
Comes with barrel extension for higher velocity shooting.
Would make a good training weapon if you are use to using Glocks
Comes in Tan and Grey two tone options also.
Can use CO2 or gas magazines.
Field strip-able.
Cons:
Sights are not adjustable.
Would have liked the addition of white dots or outline on the rear sight.
Slide spring could be slightly heavier.
Comments:
Let’s be clear, the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol is not a Glock Replica. It is different in many ways, the idea here is that it is close enough to be a good alternative if you are use to shooting Glocks and want something to train with that looks, feels and functions a lot like a traditional Glock. I am hoping the TBC version performs as well as the non-TBC version shot for me when I made my original Field Test Shooting Video back in 2023. For me the KJWorks KP-13 TBC CO2 Blowback Airsoft Pistol checks all the boxes… Full blowback operation, a very good trigger, lots of realism and I am sure good performance based on my past review.
This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.
Let’s get into what I found in this most recent Mystery Box in order of appearance…
The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.
Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.
Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.
Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.
Here is Bonus Video Five in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this Fifth Bonus Full Auto Fun Video I bring out a past Full Auto Fun Airgun that I just couldn’t resist takin out for some full auto fun once again. The WE AK74UN Gas Blowback Full Auto Airsoft Rifle has got to be one of the hardest blowback Airguns I have shot, I would say even a bit more blowback feel than the KWA Mini UZI! The WE AK74UN Gas Blowback Full Auto Airsoft Rifle also does a great job of keeping Airsoft BB’s on target even in full auto with all that recoil as you will see in this video as I dial it in part way through my walk about. Unfortunately we do not sell anything like this anymore at least in Airsoft, the closest thing to it is the Crosman AK1 Blowback CO2 Full Auto BB Rifle which is still a lot of fun with a bit less recoil but a higher rate of fire.
Type:Blowback BB Pistol. Manufacturer: Made and Distributed by KWC. Model:K17 (Black Barrel Version). Materials: Metal & Polymer. Weight: 1.68 pounds (760 grams). Barrel: 4.3 inches metal non-rifled. Propulsion: 1 x Co2. Action: Semi auto blowback, single action only trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 17 round drop out full size metal magazine. FPS: Claimed 329.
Trigger Pull: The trigger pull on the KWC K17 Black Barrel CO2 Blowback BB Pistol is short with only a little bit of take up, the release is light and crips. The blowback action resets the internal Hammer / Striker with each shot for that true single action trigger and it’s also nice that the trigger does have a working trigger safety. You will need to rack the slide for the first shot but then the blowback action takes over for the rest of the shots.
Accuracy: I have already made a Field Test Shooting Video for the Gold Barrel version of this same KWC K17 pistol so you can check out that video here to see how the Black Barrel Version will essentially shoot. If you want to know right here and now the KWC K17 shot right around 325 fps and got a 4 inch grouping at 30 feet away shooting 10 rounds into a paper target. Maybe the Black Barrel Version will shoot a bit differently for me? We will find out soon enough…
Build Quality: TheKWC K17 Black Barrel CO2 Blowback BB Pistol feels really good, I’m going to say it’s probably one of the nicest KWC CO2 blowback pistols I have had in my hands to date. The finish is really nice, the polymer frame is flawless and fit is really good with nice tight tolerances throughout. it may even look better to me than the Umarex Glock version it is similar to?
Realism: The KWC K17 Black Barrel CO2 Blowback BB Pistol being a full blowback Airguns is supper realistic in terms of looking like and functioning like a real steel gun. All the parts function as you would expect them to including the ability to filed strip the KWC K17 which gives you easy access to the hop-up. In terms of the KWC K17 Black Barrel CO2 Blowback BB Pistol being a replica it does look similar to Glock with some differences like the trigger guard, slide cut-outs, extended beaver tail and straighter pistol grip. As I shoe in my Review video the parts even mix and match with the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol we also sell. Available From: The Replica Airguns Store.
Pros:
Good weight with very solid feel to it.
Full blowback action will produce good recoil effect.
Full size drop out metal magazine.
Short and light single action only trigger.
No ugly markings or warnings.
I prefer the more standard look of this Black Barrel Version.
Field strips like the real steel version.
White dot sights front and back.
Adjustable hop-up to adjust for some limited elevation as needed.
Working trigger safety along with serial number safety.
Cons:
Full blowback action will produce lower fps and use up more CO2.
But plate could be more like the Umarex Glock version.
Comments:
I really like the KWC K17 Black Barrel CO2 Blowback BB Pistol as I did the Good Barrel Version, it may even be one of my favorite CO2 Blowback BB Pistols from KWC to date. I am not a huge fan of the Gold barrel version but that’s a personal preference thing. All in all if you’re looking for that Modern Pistol design than the KWC K17 CO2 Blowback BB Pistol is going to fit the bill. If you are a Glock fan also make sure to checkout our Umarex Glock line of CO2 BB, Airsoft and even Paintball Replica Pistol in our online Replace Airgun stores…
This is not exclusive to Airguns since trends of Airguns are highly influenced by what type of Real Steel Pistols are popular to people. This is often based on what people see portrayed in movies and TV Series, and also promoted online. There is for sure an overlap in what is popular and it is hard to say what is influencing what? Is it the popularity of Pistols out in the real world that influences what we see being used in the movies and on TV? Or is it what we see in Movies and TV that influences our choices of pistols out in the real world? Perhaps it is a combination of both?
My list is based on my own personal experience and does not represent the entirety of types of Pistol designs available.
In this Comparison Video I show several models of Glock Replica Airguns distributed under the Umarex/Glock license. Umarex has brought to market several Glock Replica Airguns to date including BB, Pellet, Airsoft and even Paintball versions in a variety of models. I showcase only a few of these models in this video but it is a good selection to give most people an idea of what is available from our Replica Airguns website in terms of Glock Pistols.
The KJ Works KP-13 CO2 Blowback Airsoft Pistol does look a bit like a Glock but don’t be fooled, it is fore sure not a Glock at all. That said it might just make a great training Airsoft pistol if you own a real steel Glock or plan on owning one in the future as it is about the same size and shape and operates similarly to a real Glock. In this video I put it through its paces using my Chronograph to find out the real world velocity and I also place 10 shots on a paper target to see what kind of accuracy I can get from 30 feet away.
Starting with my power or velocity test I put 5 rounds through my Chronograph using standard .20 gram Airsoft Plastic BB’s. I was using a brand new CO2 and the temperature being around 21 degrees Celsius or 70 degrees Fahrenheit, so not too hot or cold. I did only test using the preinstalled internal non-extended barrel so if you do plan on using the longer extend barrel that the KJ Works KP-13 CO2 Blowback Airsoft Pistol comes with, you will more than likely get another 30-40 fps out of this Airsoft Pistol. That said I was able to get an average of 348 fps with my slowest shoot hitting 329 fps and my fastest shot hitting 363 fps. As expected the fastest shot was my first shot out of the Airsoft gun and my slowest shot was my last as the Airgun cooled down.
I then moved on to my accuracy portion of the Field Test for the KJ Works KP-13 CO2 Blowback Airsoft Pistol. It did shoot rather high so I did have to aim at the bottom ring of the target to actually hit closer to the middle. It also shot just a tad to the left but not much so keep that in mind since the sights are not easily adjustable. Hop-up adjustments may lower the rounds a bit but it’s hard to say how much. The KJ Works KP-13 CO2 Blowback Airsoft Pistol did get close to a 1 inch 9 shot grouping (first shot was really high aiming at the bullseye), so that was impressive and the blowback feels solid with a really nice Glock like short and easy trigger.
The KJ Works KP-13 CO2 Blowback Airsoft Pistol is a nice looking and good performing Airsoft Pistol that looks enough like a glock to perhaps appeal to Glock lovers looking for something similar but unique in its own way. After all doesn't everyone already have a Glock, so be a bit different and pick yourself up one of these KJ Works KP-13 CO2 Blowback Airsoft Pistols and be a trend setter!
Type: Blowback CO2 Airsoft Pistol. Manufacturer: Distributed by KJ Works. Model:KP-13. Materials: Metal & Polymer. Weight: 1.7 pounds (770 grams). Barrel: 3.7 inches (95mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, SOA trigger. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 24 round drop out full size metal magazine. FPS: Claimed 366+.
Trigger Pull: The trigger pull on the KJ Works KP-13 CO2 Blowback Airsoft Pistol is what you would expect for a true Single Action Only Trigger which is nice and light. There is a bit of take up but you can feel the point near the back where the release kicks in which is extremely predictable with no play in it. Of course you will need to rack the slide in order to place a round in the breach and fire the first shot, after that the blowback action will do all the work for you.
Accuracy: At this point I have not shot the KJWorks KP-13 CO2 Blowback Airsoft Pistol or done my Field Test Performance Video. I would expect the KJWorks KP-13 to perform like the other KJWork Airsoft Pistols I have reviewed in the past, which generally hits the claimed fps. Keep in mind the claimed fps is with the extended barrel and I more than likely will be using the preinstalled shorter non extendable barrel which will have a slower fps for sure. Accuracy should be decent but we will find out when I make my Field Test Shooting video!
Build Quality: The KJWorks line of Airsoft Guns is know for overall good quality so I expect theKJ Works KP-13 CO2 Blowback Airsoft Pistol to be just the same. From my initial first impressions everything looks really good, fit and finish are excellent and as expected you will find metal parts and polymer parts in all the same places you would find them in a real steel modern semi auto pistol.
Realism: The KJ Works KP-13 CO2 Blowback Airsoft Pistol is not an exact replica of a specific semi auto pistol but yo could say it looks a little bit like a Glock ;) You need to be careful when it comes to Glock as they do not like it when companies copy their guns and rightly so. There is enough differences with the KJ Works KP-13 CO2 Blowback Airsoft Pistol so it should not set off any alarms over at Glock. I do like the two tone tan and black color scheme KJ Works went with for the KP-13 but if you like a more traditional look you can always go with the all black version.
Pros:
Metal and Polymer with decent weight and good feel to it.
Heavy Full blowback operation.
Excellent fit and finish as always with KJWorks pistols.
High capacity full size drop out metal magazine that holds the CO2 and 24 rounds.
Well hidden safety incorporated into the serial number under the barrel.
Working trigger safety.
Super easy to see in all conditions fiber optic sight up front.
All working components like a real steel Glock styled pistol.
Comes with extended barrel for higher velocity and easier import into Canada.
Would make a good training weapon if you are use to using Glocks.
Like the two tone finish, but can also get it in all black.
Easily field strip-able.
Cons:
Sights are not adjustable.
Would have liked the addition of white outline on the rear sight.
Slide spring could be slightly heavier.
Comments:
If you’re looking for a pistol that is similar to a Glock for training purposes but is unique in its own way and doesn’t have to be a Glock, then perhaps the KJ Works KP-13 CO2 Blowback Airsoft Pistol may be for you. I like the fact that it has its own style to it and is not just another Glock or Glock Copy. I also like that the KP-13 comes with a CO2 magazine rather than a Green Gas Magazine which will get you a bit higher velocity and more mag fills before requiring to gas up again. I personally like the two tone version but get what you like best, it’s good to have options!
Type: Blowback CO2 Pellet Pistol. Manufacturer: Distributed by Umarex. Model:Glock 17 Gen 5. Materials: Metal & Polymer. Weight: 1.6 pounds (725 grams). Barrel: 4.5 inches metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, DOA trigger. Ammunition Type: .177 caliber pellets. Ammunition Capacity: 21 round drop out full size metal magazine. FPS: Claimed 370.
Trigger Pull: The trigger pull on the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol is what I would describe as closer to a DOA (Double Action Only) trigger. The blowback action does retract the internal hammer/striker which does relieve some of the trigger pull but the trigger is also used to rotate the belt magazine which gives the trigger a kind of friction feel especially right at the end of the pull where the rotation occurs. That said it is not a terrible trigger like some other belt fed Airguns but it is certainly nutlike a standard SAO type Glock trigger.
Accuracy: At this point I have not shot the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol so I can only quote what Umarex is saying in terms of FP2 which is 370. That sounds a bit high for a pellet Airgun but they may be claiming this velocity using a light weight pellets perhaps made out of an alloy rather than lead? I guess we will find out the real world fps using lead pellets and also how accurate it will be when I do my Full Field Test Shooting Video.
Build Quality: The Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol like most of the Umarex Glocks is very well made. I am thinking that Glock to allow Umarex to license Glock Pistols hammy have a quality control as part of this license agreement? Either way the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol is a solid and well built Airgun all around with quality material and very good fit and finish.
Realism: The Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol in terms of realism as compared to a real steel Glock 19 Gen 5 for sure hits the mark in most categories. It is a bit lighter and you can not field strip it easily, there is also the not so much recessed barrel that is a bit of a giveaway but in terms of most other attributes the Umarex Glock 17 Gen 5 replicates a real Glock… Including the basic looks and feel, the metal slide and polymer frame, the full size drop out metal magazine, the blowback action and most of the working parts including the slide catch release, magazine release and trigger safety.
Pros:
Good weight and feel to it, build quality and fit and finish seem very good.
Really nice looking and full featured replica of the original Glock 17 Gen 5.
Fully Glock licensed via Umarex.
Easy to see white dot sights front and back.
Working trigger safety.
Accessory rail for adding a laser or tactical light.
Full size drop out metal magazine that holds the CO2 and .177 caliber pellets.
Nice high 21 round capacity.
Slide spring feels nice and heavy provide a decent blowback recoil effect.
Safety built into the serial number plate area keeps it well hidden.
Can see through ejection port when magazine is out.
Warning instruction are nice and discreet under trigger guard.
370 claimed fps is good for a CO2 blowback pellet pistol.
Cons:
Barrel is not really all that recessed.
No way to easily field strip it.
Don’t like the clam shell packaging.
Trigger is a bit on the heavy side.
Comments:
I think many of us having been waiting for a pellet shooting version of the Glock from Umarex. I am a bit surprised they went with a belt fed version as belt fed magazines tend to be a bit on the heavy trigger pull side. Yes the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol has a stronger trigger pull as compared to a 4.5mm BB or 6mm Airsoft version of the same Umarex gun, as most of these Umarex based Glocks utilize a SAO trigger which is more comparable to a real steel Glock. On the plus side the Pellet version should be a bit more accurate, but we will see how this pans out when I do my comprehensive Field Test Shooting Video for the Umarex Glock 17 Gen 5 CO2 Blowback Pellet Pistol.
I have another Full Auto Fun Video this one focusing on 4.5mm Steel BB Versus 6mm Plastic and which one is better in terms of accuracy and shredding power. I perform this super scientific test by shooting obviously in full auto two comparable Steel BB and Plastic Airsoft Rifles at a paper target setup 20 feet away with a magazine as a backer so I can see what the accuracy is like and how much of the paper magazine gets shredded by each ammo being tested.
I have split this video into three separate videos, in video one I compare two similar AR styled rifles, a CO2 powered Blowback 4.5mm BB Rifle to a Gas Blowback 6mm Airsoft Rifle. In video two I compare two AK type Blowback Rifles to each otters, again a CO2 4.5mm Steel BB along with a Gas 6mm Airsoft.
And lastly in Video three I compare my top picks for each category which include a non-Blowback CO2 4.5mm BB Machine gun to an AEG 6mm Airsoft Rifle.
In this Field Test Shooting Video I test out the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol in the Indoor Replica Airguns Sea Can Shooting Range to find out what the real world velocity and accuracy is for it. I start off by putting 5 rounds through my Chronograph and average the fps, I then I setup a fresh paper target 30 feet down range and put (max amount in the magazine) 8 Paintball rounds into it to see how close of a grouping I can get. If you want more details and specifications on the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol then checkout my Table Top Video for that information.
Starting with the Chronograph velocity test Umarex says you can expect around 350 - 400 fps which seems rather high to me based on my other Field Tests with similar .43 caliber Paintball Pistols. Perhaps this is using actual Paintballs whereas I was using rubber balls for my testing to reduce the mess in the Sea Can. I was able to average 300 fps using a brand new CO2 in what I would consider to be about a room temperature conditions which means in warmer situations I am sure we can get even higher than the 300 fps I hit on this day.
For the next portion of the Indoor Field Test I loaded 8 rounds into the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol and carefully placed them into a paper target 30 feet down range. I was using my standard seated position in the back with my hands resting on a sand bag up front which I have found to be fairly stable but there will still be some human factor which can effect overall accuracy. My results where about what I was expecting with a Paintball Pistol shooting Rubber Balls, generally they will spread out a bit at 30 feet and in this Field Test my 8 shot group spread out to about 8 inches or so. They did seem to be well centered on the target as a group and if I was shooting at a human sized torso at that distance I would have hit it every time.
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another nice addition to the Umarex / T4E lineup up .43 Caliber Replica Paintball Pistols and if you are a Glock owner and want a Paintball Pistol to train with, then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is about as good as you can get, the only other option would be to go with an Umarex Glock Airsoft or BB Pistol but at least we now have a bunch of options depending on your specific needs!
Type:Paintball Gun. Manufacturer:Umarex - T4E. Model:Glock 17 Gen5 Materials: Metal & Polymer. Weight: 726 grams (1.6 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 8 Rounds. FPS: 350-400.
Trigger Pull: The trigger pull on Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol feels a lot like a double action trigger mainly because when you pull the trigger the inner barrel travels backwards into the magazine placing a paintball round in the barrel which seals the barrel with the magazine so less CO2 is wasted. This does make the trigger a little bit longer and heavier than a single action trigger. The internal hammer/striker is engaged from the blowback action reducing the friction on the trigger. In terms of it being similar to a Glock trigger pull it will be a bit heavier and longer but not bad overall.
Accuracy: So far I have not had the opportunity to test the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol out so stay posted for my future Field Test Shooting Video where I will see what kind of velocity and accuracy we can expect from it. For now you can watch my Field Test Shooting Video for the Umarex T4E Walther PPQ M2 .43 Caliber Paintball Pistol as it is very similar in design and should for the most part perform about the same.
Build Quality: The build quality of the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol a solid 1.6 pound overall weight with the magazine in. The fit and finish is also very good with virtually no slide wiggle to be found.
Realism: The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is a licensed Glock Replica via Umarex which owns the licensing so you will find Glock licensing and branding throughout this Paintball Pistol. Just looking at the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol you would find it hard to tell the difference between it and the real steel Glock 17 Gen5 but there are some notable differences as in the length of the slide travel which is about half of what you would expect from a real Glock. This is to account for the obvious internal differences to allow for CO2 and paintballs to be used. Overall the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol would make a great training pistol if you are a Glock owner and want to use the closest gun to it.
Pros:
Really great weight and solid feeling gun.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weight to the gun.
Good for Glock shooters looking for a training weapon.
Everything works pretty much like the real gun so again great as a training tool.
Easy to see white dot sights front and back.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out so be warned!
.43 caliber barrel opening, adds to realism.
Fully Glock licensed via Umarex.
Comes in a ice hard shell case.
Cons:
Trigger is a bit heavy, not as light as a real Glock, more of a double action trigger in function.
Magazine only holds 8 rounds, so you are going to need extra magazines for sure.
Blowback action is not full blowback, more like a typical half blowback BB gun.
Comments:
The Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol is another great addition to the Replica Paintball Pistol options out there and if you are a Glock owner looking for a training gun you can use for some additional trigger time outside of a gun range or want to perform realistic training exercises with live players then the Umarex T4E Glock 17 Gen5 CO2 .43 Cal. Paintball Pistol will fill this need. I am looking forward to testing it out when I make My Field Test Shooting Video as Umarex claims it to have significantly higher fps (350-400) then some of the other replica T4E Paintball guns I have reviewed so far. I guess we will see soon!
In this Field Test Shooting Video I perform two main test using the WE 1911 GBB Airsoft Pistol. A chronograph test to see what the real world velocity is and then I perform an accuracy test to see how accurate the WE 1911 GBB Airsoft Pistol is at 30 feet away. If you are interested more in specifications and details along with close up video of the WE 1911 GBB Airsoft Pistol then check out my Table Top Video Review for it where I even do a field strip on camera.
Starting off with my chronograph velocity test. I decided to find out what the differences would be using the internal short barrel and the extended external barrel since the WE 1911 GBB Airsoft Pistol does come with both to allow for higher fps and easier import into Canada. The WE 1911 GBB Airsoft Pistol is rated for 360+ fps using the extended longer barrel so I started with that one first and was able to achieve a 383 fps 4 shot average. Switching to the shorter internal only barrel the velocity was reduces as expected and I got an average 3 shoot velocity of 300 fps. So it is safe to say that the barrel extension added an additional 80+ fps to the velocity!
Next I placed a fresh paper target 30 feet down range and shot 10 rounds into it using a seated shooting position with my hands resting on a sand bag up front, this allows for a fairly stable platform to shoot from but is not without some human factor. I also decided to use the barrel extension for this test as the threading on the end of the internal barrel can disrupt airflow causing turbulence a bit and effect accuracy. I was able to get around a 2.5 inch grouping with my 10 rounds. The WE 1911 GBB Airsoft Pistol shot fairly well on the bullseye up and down with the out of the box hop-up setting but it did shoot just slightly to the left. Since there are no sight adjustments you will have to factor this into your aim point when shooting out at farther ranges, but at around 30 feet you should not have much problem shooting a human sized target or even a pop can.
All in all the WE 1911 GBB Airsoft Pistol perfumed as expected with consistent fps and a nice 10 shot grouping on my paper target. I did find the sights a bit hard to see as my eyes are not what they use to be so black sighted pistols with whit dot sights make it a lot easier for me to line up my target. People with younger eyes will most likely not have this problem but for us a bit older guys, keep this in mind. If you’re looking for a classic 1911 A1 that performs well and looks really nice then the WE 1911 GBB Airsoft Pistol may be just the perfect fit for you!
In this Update Preview Unboxing Video I take a look at 4 newer products that just came across my table and are in our Replica Airguns Online Stores. One is a CO2 Blowback BB Pistol, one is a CO2 .43 Caliber Paintball Pistol and two are GBB Airsoft Pistols, so a rather nice selection for us to take a look at here! I will be following up this Update Preview Unboxing Video with proper Table Top and Field Test Shooting Video to find out all the details and how well they perform.
Type: GBB Airsoft Pistol. Manufacturer: WE Airsoft Model:1911 A1 Materials: Mostly all metal build. Weight: 1.7 pounds (760 grams). Barrel: 4.5 inches, non-rifled. Length: 8.5 inches. Propulsion: Green Gas / Propane Action: Semi Auto, single action only trigger. Ammunition Type: 6mm Plastic Airsoft BB's. Ammunition Capacity: 15+1 round full size dropout metal magazine. FPS: 366+ with extended barrel.
Trigger Pull: The trigger pull on the WE 1911 GBB Airsoft Pistol is about what your would expect from a 1911 type pistol which is a good thing since they are generally short and light which makes for easy fast action shooting! There is just a bit of slack in the trigger, perhaps less than a millimeter with a predictable light release. Trigger reset is almost non existent.
Accuracy: I have not yet made my Field Test Shooting Video for the WE 1911 GBB Airsoft Pistol but plan to next week so stay posted for it. I will be testing out both the extended barrel and internal short barrel to see what the velocity difference will be and then when it comes to accuracy I will test out the WE 1911 GBB Airsoft Pistol using the extended barrel to exclude the threading on the short barrel interfering with accuracy.
Build Quality: The WE 1911 GBB Airsoft Pistol is a really gorgeous looking pistol in the stainless finish. You will find it has an overall solid build quality, it is virtually all metal with only the grips and some internal parts like the gas chamber and nozzle being plastic. There is almost zero slide wiggle and all the mechanical parts work and engage nicely. The only thing I noticed was that the ejection port near the front could have been finished a little bit better as there seemed to be some slight ridges in the metal there.
Realism: As is with most Full Blowback Airsoft Pistols they are built to look and act the part of their real steel counterparts and the WE 1911 GBB Airsoft Pistol is again no exception! All mechanical parts work as intended and you can easily field strip the WE 1911 GBB Airsoft Pistol to swap out the internal barrel and adjust the hop-up. I like the fact that WE Airsoft color matched the magazine rather than simply shipping it with the black magazine as I have found some other companies do.
Pros:
All metal pistol with decent weight to it.
Crisp Firm full blowback operation.
Very good fit and finish.
No marking on the metal parts at all, some may like this.
Color matched stainless magazine.
Gun will accept real 1911 grips 99% sure of this :)
All controls work just like there real steel version, safety, slide catch release, safety and grip safety.
Should have good fps with barrel extension, enough for import into Canada.
Very believable working replica of the real steel Colt 1911 A1 Pistol.
Fully field strip-able.
Comes with extension barrel and replaceable inner barrel if not going to use extension.
Cons:
No markings or licensing on the gun if that is important to you?
Perhaps a bit lighter than a real steel 1911 at 1.7 pounds.
Magazine only holds 15 rounds but the real steel 1911 only held 7 rounds.
Comments: As I have mentioned in many of my other videos, I am a huge 1911 fan and even go so far as to prefer the standard Government issue over all others as it is the most basic and closest to its original version. There are a ton of BB and Airsoft Blowback 1911’s available now so it is really hard to pick which one to get understandably. If you are a WE fan then this choice should be fairly easy, if you are not sure about WE then all I can say is this is one of the nicer 1911 A1’s and if you want a lighter weight gun over a heavier gun then that may also play a roll in your buying decision. I can’t comment just yet on performance but I will know shortly so stay posted. If it performs well then there is no reason not pick yourself up on of these WE 1911 GBB Airsoft Pistols!
My Table Top Video of the WE 1911 GBB Airsoft Pistol:
I have a nice Airgun Pistol Update Unboxing video to checkout where I take a look at 5 Airguns four of which are Gas Blowback Airsoft Pistols and one is a CO2 BB Revolver. I don’t go into a lot of details here on each Airgun as this is mainly just a preview video to let everyone know we have these products in our Online Replica Airgun Stores and give a you a quick look at them. I will be following up with individual Table Top and Field Test Videos where I go into more details and also show you how each gun performs in the Replica Airguns Indoor Sea Can Shooting Range.
Back in 2017 I made “Which Beretta Airgun is the Best” Video and showed off some 4.5mm Steel BB and .177 Caliber Pellet versions of my favorite Beretta 92 - M9 style Air Pistols. There have been some changes since then most noticeably the addition to Airsoft versions so I thought I would update this video with more current Beretta Airguns along with of course some of the same ones form my last video.
Because I show off 4.5mm Steel BB, .177 Caliber Pellet and 6mm Plastic Airsoft versions I decided to pick my favorites form each category. Watch my Vimeo Review Comparison Video so checkout these Air Pistols and see which ones are my favorites…
.177 Caliber Pellet Beretta 92 -M9 CO2 Air Pistols
In this Vimeo Comparison Review Video I take a look at a selection of Glock CO2 4.5mm Steel BB Pistols, four from Umarex and 1 from KWC. I go over some of the similarities and differences of each of them and ultimately decide which one is my personal favorite out of the bunch based on what I generally look for in an Airgun.
UPDATE: All Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols now ship with the Shorter Barrels!!
In this Field Test Shooting Video I test out the Umarex Glock 17 Gen 4 GBB Airsoft Pistol in the Replica Airguns Indoor Sean Airgun Shooting range. This product now comes with the longer sticking out barrel to increase the FPS for import into Canada to get it up and over the 360 FPS requirement using a .20 gram Airsoft BB. In my previous video I test out the Umarex Glock 19 Gen 3 GBB Airsoft Pistol but swapped out the longer barrel for the shorter barrel to see how much the sorter barrel reduces velocity and also if there is an impact on accuracy? Make sure to watch that video to get the scoop on the shorter barrel with both the Umarex Glock 17 dam Glock 19 GBB Airsoft Pistols
For the velocity portion of this test I placed several .25 gram Airsoft BB’s through my Chronograph and was please to get a very consistent 355 average FPS reading which is very close to the claimed 360 FPS when using .20 gram Airsoft BB’s so if I had been using a lighter BB I would have for sure seen velocity up and over the 360 FPS.
In terms of accuracy the Umarex Glock 17 Gen 4 GBB Airsoft Pistol also performed really well, maybe not as well as the short barrel Glock 19 Gen 3 I tested just last week that seemed to group just a little bit tighter and was a little bit more well vented on the target. Both the Glock 17 and Glock 19 shot a bit low but I am sure a slight hop-up tweak could rectify that. I did however manage to get around a 2 - 2.5 inch 10 shot grouping.
So in summary both the Umarex Glock 17 Gen 4 and Glock 19 Gen 3 GBB Airsoft Pistols at least for now come with the longer barrels only and so you options are to either cut down the existing barrel or buy a shorter barrel and replace it, that is unless you like the look of the long sticking out barrel ;) You will get a velocity drop of around 75 FPS with the shorter barrel installed but I would say accuracy should be about the same at the end of the day.
