View fullsize

In this Field Test Shooting Review I’m taking a look at the Umarex T4E TC68 .68 caliber paintball / less-lethal marker to see how it performs in terms of velocity, accuracy, and overall shooting experience.

I have already done a Table Top Review covering the specifications, features, and overall purpose of the TC68, so make sure to check that video out if you want the full breakdown of the gun itself. This field test review is focused strictly on real-world performance.

For this test the TC68 has been de-restricted, meaning the adjustment screw has been modified slightly so it can reach its full potential. Even with this adjustment it should still remain legally compliant here in Canada, since the velocity will remain under the 500 fps threshold.

For ammunition I used .68 caliber nylon rounds:

• Black rounds: approximately 2.8 grams

• Yellow rounds: approximately 2.6 grams

The TC68 in this test is powered using dual 12-gram CO2 cartridges, rather than the larger 88-gram CO2 cylinder, which will affect both shot consistency and total shot count.

View fullsize

Velocity Testing

For the velocity portion of the test I fired several shots through my chronograph.

Chronograph readings were somewhat tricky to capture at first, but once everything started working correctly I was able to record several shots.

Example readings included:

• 476 fps

• 463 fps

• 453 fps

• 445 fps

The velocity dropped slightly during the test, which is expected when using dual 12-gram CO2 cartridges, as they cool down fairly quickly during rapid shooting.

The slightly heavier 2.8-gram black rounds were also used for some of the shots, which can contribute to minor changes in velocity compared to the lighter 2.6-gram rounds.

Even with that drop, performance was still strong and suggests the TC68 could likely reach high-400 fps velocities with a fresh CO2 setup or an 88-gram CO2 cylinder, which provides much greater gas capacity and improved consistency.

View fullsize

Accuracy Testing

For the accuracy portion of the test I set up a paper target down range and loaded roughly 20 rounds into the magazine.

The first test consisted of 10 shots in semi-automatic mode using the heavier black nylon rounds. A red-dot optic was installed on the TC68 for aiming, though it had not been sighted in or adjusted beforehand.

Results were quite respectable for a marker shooting heavy .68 caliber rounds.

• Overall grouping was approximately 4 inches

• Most shots landed within a 2.5–3 inch cluster

• One shot landed slightly low outside the main group

Considering the optic was not adjusted and this was essentially a right-out-of-the-box test, the accuracy was quite good.

Full-Auto Shooting Test

After the semi-auto accuracy test I attempted a full-auto burst test, but quickly discovered the CO2 had been depleted.

After installing fresh CO2 cartridges, the full-auto test was repeated with approximately 20 rounds loaded.

The TC68 does not have an extremely fast rate of fire, but it still delivers a solid stream of rounds when the trigger is held down.

View fullsize

During full-auto fire:

• The gun remained fairly controllable

• Rate of fire was moderate but effective

• CO2 cooling became noticeable during sustained bursts

A fresh target confirmed that the TC68 was still accurate enough for defensive-style shooting, keeping the majority of rounds within the main target area even during burst fire.

Power and Energy

Using approximately 2.8-gram nylon rounds traveling around 475 fps, the TC68 is producing significantly more energy than its factory-rated 16-joule output. Closer to 30 joules!

The modification performed simply allows the power adjustment screw to reach its full depth, allowing the marker to operate closer to its maximum potential.

While exact energy figures will depend on projectile weight and velocity, the TC68 in this configuration appears capable of producing considerably higher energy levels than stock, while still remaining under the 500 fps legal limit in Canada.

Shooting Impressions

Overall the Umarex T4E TC68 proved to be a solid and reliable platform during testing.

Some observations from the field test:

What I liked

• Strong velocity potential

• Good accuracy for a .68 caliber marker

• Full-auto capability for rapid follow-up shots

• Compatible with multiple CO2 power options

Things to consider

• Dual 12-gram CO2 cartridges cool down quickly

• Larger 88-gram CO2 cylinders will provide better consistency

• The gun includes multiple safety mechanisms that require familiarity

The TC68 includes three levels of safety, which helps prevent accidental discharge but does require some practice to become comfortable with the controls.

View fullsize

Final Thoughts

The Umarex T4E TC68 performed well in this field test.

Velocity was strong, accuracy was respectable for a .68 caliber marker, and the full-auto capability adds an interesting dimension to the platform.

With proper setup and a fresh CO2 source, the TC68 has the potential to deliver high-energy shots while still remaining within Canadian legal limits.

Overall it’s a very capable paintball / less-lethal marker and definitely an interesting option for those looking for a high-power .68 caliber platform.

• Buy the Umarex T4E TC 68 Less Lethal Paintball Rifle in Canada

• Buy Paintball Guns in the US

View fullsize

Type: .68 Cal Paintball / Training Marker Rifle /Less Lethal
Manufacturer: Umarex (T4E / Training for Engagement)
Model: T4E TC68
Made In: Taiwan
Materials: Polymer exterior with internal metal components (metal flash hider + various metal controls)
Weight: 2.5 kg (5.52 lb)
Overall Length: 84 cm (33")
Barrel: Approx. 31 cm (12") smoothbore (.68 cal)
Power Source: 2x12g CO2 (in-stock dual system), 88g CO2, or HPA (via included adapter)
Action: Semi-auto and full-auto
Ammo Type: .68 Cal paintballs, rubber balls (including heavier core types), powder/dust/chalk balls, glass balls, pepper balls (where legal), and First Strike–style shaped rounds (magazine-fed)
Ammo Capacity: 20-round spring-assisted magazine (plus hopper-fed option with included adapter)
Claimed Velocity Range: 240–480 fps (adjustable; depends heavily on ammo weight and air source)
Energy (Context): Marketed around 16J “out of the box,” with higher output possible via the built-in adjustment system (jurisdiction-dependent and often tamper-restricted)

View fullsize

Trigger Pull
The TC68 uses a semi-auto style trigger that feels closer to a single-action pull (it needs to work this way to support full-auto). The break is straightforward and predictable, and it suits the “training marker / utility” role well.

Accuracy

This table top review is focused on features, build, and usability. Accuracy testing and chronograph results are better handled in a field test once ammo weight is confirmed (rubber vs. paintball vs. hard plastic rounds will all change results). Initial “gut feel” shooting suggests the factory setting is already pushing hard for a training marker, with performance feeling consistent with the advertised 16J class.

Build Quality

The TC68 is largely polymer on the outside, but it doesn’t feel like a toy. The weight is substantial, controls feel solid, and the overall package is clearly built for training and repeated handling. You’re getting a robust platform designed to run multiple air sources and a wide range of .68 caliber projectiles without needing a bunch of aftermarket parts just to get started.

Realism / Ergonomics / Controls

Visually and ergonomically the TC68 leans into an AR-style layout:

• AR-style grip geometry (and AR-compatible grip fitment style)

• Full-length Picatinny top rail

• M-LOK on the handguard (sides and bottom) for lights, foregrips, etc.

• Ambidextrous selector (Safe / Semi / Full)

• Ambidextrous magazine release

It does not have real-steel operating controls like a charging handle or functional bolt/dust cover, this is a marker, not a firearm replica mechanism, but from a distance it reads like a modern sporting rifle pattern, which matters for training applications and general “presence.”

Safety systems are layered:

1. A “quick pierce / activation” setup (pressurizes the marker only when you choose)

2. A cross-bolt style safety that controls readiness to fire and can also depressurize when switched back (you’ll hear it vent)

3. Standard safe selector switch position

View fullsize

Air Source Flexibility (CO2 + HPA) and Included Hardware

This is one of the biggest selling points: it ships with a lot of the “bits and pieces” that usually cost extra.

You can run:

• Dual 12g CO2 (the configuration shown in the review)

• 88g CO2 (full-length stock configuration)

• HPA via included adapter (plus an alternate stock option that works well with compact tanks)

The included quick-pierce style setup is practical: you can stage the marker with CO2 installed without continuously bleeding gas, then activate it only when needed.

View fullsize

Feeding Options: Magazine-Fed or Hopper-Fed

Out of the box you get:

• A 20-round spring-assisted magazine designed to load easily (the spring can be held back during loading, then feeds when inserted)

• A hopper adapter system (hopper not included, but the adapter is), letting you run higher-capacity paintball-style feeding for volume use, especially relevant if you pair HPA + full auto

The magazine also supports First Strike–style shaped rounds (magazine-fed only), expanding the use-case options for training and scenario work.

Sights / Optics

No sights are included, no irons, no basics, nothing. That’s the odd omission on an otherwise “complete” kit. Plan on adding:

• a red dot (often easiest), and/or

• irons that sit higher, or a riser setup, depending on your preferred cheek weld and optic height.

View fullsize

Pros

• Multiple air source support (2x12g CO2, 88g CO2, or HPA via included adapters/stocks)

• Quick-pierce / staged-gas concept is practical for readiness without constant leaking

• Semi-auto and full-auto capability

• Adjustable power/velocity range to suit different training and ammo types

• Magazine-fed or hopper-fed flexibility (adapter included)

• Accepts First Strike–style shaped rounds (magazine)

• AR-style ergonomics and lots of accessory mounting (Picatinny + M-LOK)

• Strong “presence” and serious performance feel for a .68 platform

• In Canada especially, it fills a niche many users are actively looking for (training/marker/home safety versatility)

Cons

• Pricey in Canada (around the ~$600 CAD range at the time of the review)

• No sights included (you must budget for at least basic aiming equipment)

• Maximum performance potential may be restricted by factory tamper measures and local rules (and you should not assume higher settings are legal where you live)

View fullsize

Comments

If you want a .68 caliber platform that can legitimately be configured for multiple roles, paintball, training, scenario use, home safety use, the Umarex T4E TC68 stands out because it’s versatile right out of the box. The “complete kit” nature (CO2/HPA readiness + mag and hopper options) is rare at this price point.

The Umarex T4E TC68 is in probably one of the most powerful “Rubber Ball”Airguns you can get here in Canada right now with the ability to even turn it up a notch (at your own discretion). With Canadian legal gun owners losing their rights to own regulated Firearms more and more each day, being able to acquire something that is not regulated may be the best option for non-Firearms Licensed holders and Firearms Licensed holders.

Field test follow-up (chronograph + practical shooting) will matter a lot with this one, because performance varies dramatically with projectile type and weight. That’s where it will be most interesting to quantify real fps and estimated energy across a couple common round types.

• Buy the Umarex T4E TC 68 Less Lethal Paintball Rifle in Canada

• Buy Airguns in the US

It’s been a little while since I’ve done an unboxing, so we’ll call this the February 2026 Mystery Box Unboxing Video.

First up: SHOT Show is officially wrapped on my end, interviews, teaser, the whole run. There should be a playlist available so you can binge everything in one place. Now that the heavy editing grind is done, I’m getting back into regular reviews, unboxings, tabletop breakdowns, and full field tests.

Also: we’re back on YouTube and I’m uploading like crazy. I’m moving the library over from Vimeo one-by-one (lots of clicks, lots of time). We’ve got roughly 1,300 videos total, and I’m already around 500 videos in, so if you’re hunting for something specific, use playlists and search because new uploads can get buried fast. If you can, subscribe and share the channel with other Airgun enthusiasts so we can build momentum again.

What was in the box?

View fullsize

1) SIG P229 (.177 Pellet, blowback)

I initially called it a P226, but it’s the P229 (compact). This is a pellet version (not BB), with:

• 16-round rotary stick magazine (8 per side)

• Blowback, semi-auto

• Claimed 380 FPS

• 3.9" barrel, 7.7" overall length

• 2.2 lb, hefty all-metal feel (mag is plastic)

No slide lock-back due to the rotary setup, but it looks great in-hand. Tabletop and field test videos are coming, and I’ll run it on typical lead pellets to see real-world performance.

View fullsize

2) T4E TC68 (.68 cal, CO2/HPA capable)

This is the TC68 trainer that shoots .68 caliber rounds (rubber, powder, paint, pepper ball options depending on what you choose). Specs and highlights:

• Claimed 330 FPS and 16 joules

• 20-round magazine-fed setup

• Supports dual 12g CO2, 88g CO2, and HPA options

• Includes multiple configurations (stocks/adapters) plus a hopper-fed option

I’ll confirm operating modes, setup options, and performance in the upcoming tabletop and field tests.

• Buy the Sig Sauer P229 Pellet Pistol in Canada

• Buy the T4E TC 68 Paintball Rifle in Canada

View fullsize

We stopped by the SABRE booth and spoke with Ashley about their Home Defense Pepper Launcher, specifically a second-generation version that (per Ashley) isn’t released yet. With less-lethal options getting more attention in Canada, I wanted to see what’s new, what specs we’re looking at, and whether it’s something we might be able to bring in for reviews and potential store availability.

What’s new with the Gen 2 (as described in the interview)

• “Quick Pierce” magazine system: Ashley demonstrated a faster “pierce and go” style setup, hit the control and you’re ready to aim.

• Pressure indicator: After piercing, an indicator pops out; as CO2 is depleted it retracts, giving you a visual cue that pressure is running out.

• CO2 release button: A control to vent the CO2, then remove the magazine.

Core platform details (current production specs for the .68 launcher family)

These are the commonly listed specs for the current .68 caliber SABRE launcher:

• .68 caliber projectiles

• 7-projectile magazine capacity

• Fiber optic sights (front/rear adjustable)

• Stated velocity up to ~350 FPS

• Range: direct impact effectiveness noted around 60 ft (18 m), with projectiles described as breaking/dispersion capability out to 175 ft (53 m)

Ashley also noted SABRE’s projectiles have a heavier payload than some competitors (in her words) to help with “strength” and accuracy.

Magazines, CO2, and shot count (from the interview)

• CO2 goes into the magazine

• 7 projectiles per magazine

• Two magazines per CO2 (so 14 shots)

Canada angle (what matters for importing)

• Ashley noted the current model is around ~20 joules, and said a Canadian version would likely need to be lower(depending on classification/import requirements).

• SABRE’s own online store states they do not ship internationally, including Canada (so any Canada availability would likely be via distribution/import channels rather than direct-to-consumer shipment).

If we can make the Canada piece work, this looks like a strong candidate for a hands-on review, especially because it’s .68 caliber, 7-round, and built around visibility (fiber optics) and ease of use.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

We didn’t catch this one at the Steambow booth, we were out at the SHOT Show indoor range checking out Steambow again, Tyler walked us through their brand-new-for-2026 B08: a magazine-fed .68 caliber ball launcher/crossbow that’s just starting to hit availability.

• New B08 .68 cal “ball launcher” platform (2026): This is a .68 caliber system designed to run .68 spherical projectiles (paint, foam/nylon, and pepper/irritant-type balls were all discussed as compatible options, depending on local rules).

• 8-shot, removable, pre-loadable magazine: The B08 uses a spring-fed 8-round magazine that inserts at the front. Tyler’s demo made it clear you can pre-load multiple mags and keep shooting quickly.

• Simple, repeatable action (easy to learn fast): The manual of arms is very “repeat-and-go”: load the mag, cock it, shoot, then cycle and repeat. Steambow describes the system as their familiar AR-Series quick-tilt/quick-clamp style for fast reloading.

• Ships mild, but can be upgraded for more power: The one I tested was using a 35 lb limb, but it’s built to accept other AR-Series limbs (stronger options sold separately). Tyler specifically said swapping to a much heavier limb can turn it into a high-velocity setup (he referenced up to a 150 lb limb and around 300 fps in his talk).

• Projectile flexibility is the whole point: If you already have .68 cal paintballs or similar at home, that’s the target “ecosystem” this is built around (so long as they’re spherical).

• Important safety + legal reality check: Steambow is very explicit that once you move beyond the “low power + soft balls” envelope, the B08 can become very dangerous, they warn that harder/heavier projectiles (including steel balls) raise risks like severe injury/lethality and ricochets, and that irritant/pepper-type rounds may be legally restricted depending on country.

Tyler’s range demo made the main selling points obvious: magazine speed, easy operation, and a huge range of .68 ball options. If we can get it lined up for Canada, it looks like a very versatile multi use platform, especially for anyone who wants .68 cal fun adn then some, without relying on CO2 or HPA.

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!

I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…

• Buy Airguns in Canada

• Buy Airguns in the US

View fullsize

What you can expect from this Field test Shooting Video for the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle are two things for sure. I test out the velocity with both 4.5mm Steel BB’s and .177 caliber lead pellets, I also chuck both of these rounds downrange to see if one may be more accurate than the other and how close I can get a 5 shot grouping for each ammunition type. If you are looking for details and specifications and perhaps some more close up video of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle then you may want to watch my Table Top Video for it here.

If you have watched any of my hundreds of Field Test Videos, then you already know I start off shooting 5 or so rounds through my Chronograph to see what the average velocity is going to be. In this Field Test I shoot 3 rounds of each ammo type, 3 BB’s and 3 pellets since it is a pump Airgun and they tend to be more consistent than a CO2 Airgun. Barra claims around 350 fps, I am not sure if this is for BB’s or Pellets or both? As it turns out (spoiler alert), both ammo types performed about the same in both the velocity and accuracy portion of my testing. For BB’s, my chronograph testing got 303, 316 and 316 for an average of 312 fps. For pellets my chronograph results were 309, 309, 314 for an average of 311, so only 1 fps off between the two. Keep in mind the BB’s weigh around 5.1 grain while the pellets I was using were around 7 grain, so the pellets will be carrying more energy downrange and hit a bit harder. By the way they are also harder to load so I would suggest just shooting the steel BB’s in this one since you can keep the fun times flowing better...

Next up for my accuracy test of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, I again shot both ammo types, but 5 rounds of each and just like the velocity test they matched each other almost exactly. Both the steel BB’s and lead pellets I was using shot really well centered left to right, maybe just a hair to the left and both shot just about an inch or so high on the bullseye I was aiming at 30 feet away. The 5 BB’s grouped nicely for me at about an inch while the pellets did get a slightly tighter 3/4 inch grouping for me in this test. I was using a semi rested shooting position sitting on a stool in the back with the rifle rested on a sand bag up front.

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle really surprised me in how it performed, It’s not going to be the most powerful BB/pellet cowboy rifle out there but compared to a Red Ryder it does have a bit more punch and in terms of accuracy I found it shot better for me than at least I can do with a Red Ryder type BB rifle. You also have the option of shooting BB’s or Pellets but I would recommend shooting BB’s since you have that 50 round hopper and the BB’s auto load when you pull the bolt back which is much easier than loading pellets with a pair of tweezers which is what I needed to do to get them in with my sausage fingers. One more thing to mention is I do not recommend pumping this air rifle more than 1 time, not only does the manual say not to, but there is little benefit in pumping it more times with only the risk to damaging the airgun. I pumped it 4 times and only got about 20 fps more out of it so just don’t do it. If you want a Cowboy style Air Rifle with a little more realism than say a Red Ryder but that shoots about the same then checkout the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle.

• Buy the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle in Canada

• Buy the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle in the US

View fullsize

Type: Lever/Pump Dual Ammo Rifle
Manufacturer: Distributed by Barra.
Model: Junior Dual Ammo Pump Cowboy Rifle.
Materials: Mostly plastic, some metal.
Weight: 4.1 pounds (1859 grams).
Total Length: 36 inches (91.44mm).
Barrel: 18 inches (45.7cm) metal rifled.
Propulsion: Pump Compressed Air.
Action: Lever/Pump
Ammunition Type: .4.5mm steel BB’s & .177 Caliber Pellets.
Ammunition Capacity: 50 BB’s in hopper, single shot Pellets.
FPS: Claimed 350-400.

View fullsize

Trigger Pull: The trigger pull on Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is respectable at about 5 pounds with a medium to short pull length. I would say it is perfect for novice shooters as it is not overly light so as not to go off easily by accident and not too heavy for youth shooters with less finger strength than adults. When you pull the bolt back to reload the ammo, the internal cocking mechanism is activated allowing for single action type shooting. You do need to activate the bolt with each shot.

View fullsize

Accuracy: My dedicated field test shooting video is planned for this week, so for now I have no idea what to expect in terms of velocity and accuracy from the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, other than it is claimed to shoot around 350 fps when using pellets. It does have an 18 inch rifles barrel which should contribute to helping a lot with accuracy, so I do have high expectations especially since it has a pretty good trigger and when looking down the sights they allow for a nice tight fix on the target. The rear stock is short but not so short that it feels cramped for an adult shooter which should also help when I perform my accuracy test.

View fullsize

Build Quality: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is nothing special when it comes to materials being used in it. It is for the most plastic with the exception of the inner and outer barrel along with the rear sight and I would imagine some other internal parts. It does feel not so bad as it is a bit over 4 pounds and is smaller in nature so it feels solid enough in the hand. I wish the Pump/Lever was metal as it would of felt a bit more solid and would have added a bit more additional weight to the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle. Fit and finish is good and overall the gun looks and feels good.

View fullsize

Realism: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is essentially styled after the Old West Lever Action Cowboy Rifle, and it has everything we would expect other than loading shells which is available in other Lever Action Air Rifles if you don’t mind paying a premium for one. The lever is actually not a lever but more of a pump so the action and look of the lever is not exactly as you would expect from a true lever action rifle, but when it is locked in place it does look the part. The gold receiver and rifle band looks sharp and I feel matches up with the dark imitation wood stock nicely. One point to make is that the hammer is not the hammer but actually the safety and the bolt not only opens the breach area but also acts as the cocking mechanism for the internal hammer.

View fullsize

Pros:

• Super easy to pump.

• Fit and finish looks decent for a mostly plastic airgun.

• In terms of realism it does look like a more compact lever action rifle for the most part

• Can shoot either BB’s or Pellets.

• Holds 50 BB’s in the hoper for quicker follow up shooting.

• Metal octagon outer barrel adds addition weight to a mostly plastic gun.

• Rear sight is metal and is also adjustable for elevation.

• Trigger pull is pretty decent, not too light but is short and about 5 pounds.

• Recessed barrel for added realism.

• Made for kids but the shoulder pull length and sight placement works for adults too.

• The gold receiver looks good and gives it a unique look.

Cons:

• Mostly plastic build.

• Manual says only one pump but I wonder why this is the case or perhaps just to deregulate it?

• Pellets are hard to load especially if you have larger hands and fingers.

View fullsize

Comments:

The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is a competitor for products like the Red Ryder but it has a bit more realism in terms of looking more like a replica of a real steel Lever Action Cowboy Rifle. It also allows for shooting pellets and has an actual rifled barrel so hopefully this helps with accuracy. You can still kind of shoot it Lever Action Style when shooting BB’s but there is the addition of charging the bolt with each shot over and above working the Lever / Pump, so it will take a bit more time to get those follow up shots as compared to a Red Ryder BB Rifle. One other point to make is that the lever is actually not a lever but more of a pump since this is not spring powered but instead has an air reservoir which on this version only allows for one pump, but on the non-junior version you can pump it up to 10 times and get a claimed 800 fps out of it (US Version). I am going to try pumpkin the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle up to three times to see if there is any difference in power but this could void your warranty if you damage the air reservoir by over pressuring it. So be good and only pump yours once as instructed in the manual.

• Buy the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle in Canada

• Buy the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle in the US

Many Canadians ask about options for what they perhaps could use for home defense since we are not allowed to really use any kind of a weapon to defend ourselves. A product classified as “Less Lethal” may be of interest to people living in Canada. I interviewed Byrna, just such a company that offers alternatives to standard “Lethal Interventions” for self protection and Josh from Byrna was kind enough to go over their pistol and rifle offerings specifically built to shoot paintball type ammunition for the purpose of stopping bad guys.

I am hoping this is a product we will be able to add to our online Replica Airgun Stores, as they do tick the boxes for import into Canada such as shooting well under 500 fps, yet having the ability to cause serious injury so as to allow them to be considered a non regulated firearm.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

In this Indoor Field Test Shooting Video I test out the Umarex T4E TR68 .68 Caliber Paintball Revolver to see what the real world velocity is and what kind accuracy I can get shooting at a paper target 30 feet away. For this Video Review I use a brand new CO2 along with .68 caliber Rubber Balls. I have already made a Table Top Video for the Umarex T4E TR68 so check that out if you’re interested in specifications and details along with more closeup video of this Paintball Revolver. And for fun I also made an interesting outside shooting video using actual Paintballs that highlights this Revolver along with the Umarex T4E HK VP9 .43 Cal. Paintball Pistol.

So let’s get straight to the shooting results! For my Chronograph test, being indoors the temperature was about room temperature, maybe a bit lower at around 19-20 Degrees Celsius or 66-68 Degrees Fahrenheit. Temperature can affect velocity as CO2 performs better in warmer conditions. My fastest Chronograph result was 205 fps while my slowest shot hitting 190 fps resulting in a average of 198 fps . Keep in mind the .68 caliber Rubber Balls have a lot more weight to them than the smaller .50 or .43 Caliber Balls used in other Umarex T4E Paintball Airguns.

View fullsize

Next I performed the accuracy portion which for me is the fun part, I often shoot 10 rounds in to my paper targets setup 30 feet down range, since the Umarex T4E TR68 .68 Caliber Paintball Revolver magazines only holds 5 rounds, I did have to make a quick magazine change half way through my Accuracy Test. I was also using a semi-rested shooting position with my hands resting on a sandbag up front and sitting on a stool in the back. There was also one other disruption in my shooting worth mentioning as I had to go up and put the paper target back on as it was dislodged by the energy of these larger Rubber Balls. That all said, I was able to get about a 5 inch grouping from my 10 rounds which is pretty good for a Paintball Airgun. I am confident you will be able to get all your shots on a body sized target at 30 feet out with a little bit of practice. Most of the shots were pretty well centered, perhaps just a little bit under the bullseye.

Even though the Umarex T4E TR68 .68 Caliber Paintball Revolver is a lot larger than the somewhat similar Umarex T4E TR50 .50 Caliber Paintball Revolver, I prefer it as I found it to shoot a bit more reliably and with good accuracy. It is maybe a bit large for some people as compared to the TR50 but I feel the extra size is worth it for the increased energy at point of impact and again the superior accuracy and reliability.

• Buy the Umarex T4E TR68 .68 Caliber Paintball Revolver in Canada

• Buy the Umarex T4E TR68 .68 Caliber Paintball Revolver in the US

View fullsize

Summer will be over before we know it, so why not get out and shoot some Paintball Pistols on a bunch of random targets in the yard before fall kicks in! I rarely get to use actual Paintballs in my Paintball Guns as I mainly test indoors and so I pretty much have to use Rubber Balls or have to deal with a bunch of clean up afterwards.

So today I grabbed my two newest Umarex T4E Paintball Pistols, the Umarex T4E TR68 and Umarex T4E HK VP9. I of course I loaded them up with their appropriate ammo .68 and .43 caliber Paintballs, and headed outside.

View fullsize

Figuring out how to make the video interesting and get lots of different camera angles can be fun, so I decided to grab my Hover Camera X1 which I think from now on is going to be my new “Camera Man” when I need a camera recoding me as I move around. I also placed my Insta 360 One R and my iVUE Vista Camera glasses in the mix. All being audio recorded with my Comica Vimo C Wireless Lapel Mic so you can actually hear everything clearly.

Seems like a lot of production using all of these recording devices and then having to line up, cut and mix everything together in post. Well you guys are worth it and I’m a bit of a tech junky so it was all kind of fun for me too.

• Buy Paintball Guns in Canada

• Buy Paintball Guns in the US

View fullsize

Type: Paintball Gun.
Manufacturer: Umarex - T4E.
Model: T4E TR68
Materials: Metal & Polymer.
Weight: 773 grams (1.7 pounds).
Barrel: 6.5 inches (165mm) ,Smooth bore.
Total Length: 13 inches (331mm).
Power Source: 1x12 gram CO2.
Action: Revolver - Double action only trigger.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 5 Rounds x 3 magazines.
FPS: 230-300.

View fullsize

Trigger Pull: The trigger pull on Umarex T4E TR68 .68 Caliber Paintball Revolver is double action only but not very long with a much smoother feel than the TR50, so maybe Umarex did some improving here. without any ammo in it the T4E TR68 trigger feels responsive for a double action trigger. We will have to see when I do my Field Test Shooting Video how it performs and if fully loaded up and primed, if it feels the same?

Accuracy: So far I have not had the opportunity to test the Umarex T4E TR68 .68 Caliber Paintball Revolver out, the only other similar product that may compare would be the Umarex T4E TR50 but I have a feeling both these guns will perform rather different since the ammo is a lot larger on the TR68. Also with the way the different triggers feel, I expect this to help with performance on the Umarex T4E TR68.

View fullsize

Build Quality: The build quality of the Umarex T4E TR68 .68 Caliber Paintball Revolver is good overall. It is a mostly plastic build with some metal parts where they need to be internally. It is essentially two plastic halves held together by small screws with few actual mechanical working external parts. You have the trigger with its working trigger safety, the removable magazine and magazine release and of course the quick puncture CO2 screw knob. The hammer is internal. The Umarex T4E TR68 .68 Caliber Paintball Revolver is not very heavy but it does feel really solid in the hand because of its very large size.

Realism: The Umarex T4E TR68 .68 Caliber Paintball Revolver is not really a replica per say of any real steel gun that I know of. It does share a lot of similarities with the Crosman Vigilante which is a CO2 BB/Pellet Revolver with its main design going back several decades. The Umarex T4E TR68 .68 Caliber Paintball Revolver looks similar to what a modern looking large caliber revolver such as a 357 or 44 magnum looks like. It is not going to fool anyone up close that you actually have a real steel revolver but then again I don’t think if you are shooting it at anyone they are going to want to get all that close to you :)

View fullsize

Pros:

• Hoping to get a bit more raw energy out of the T4E TR.68 than the TR50 as it uses larger heavier ammo. (TR50 averaged 328 using rubber balls for reference).

• Lots of mounting options for accessories like a tac light, laser or other sighting option with it’s upper and lower picatinny rail setup.

• Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out while in storage.

• Working Trigger Safety.

• White dot sights super easy to see on targets of varying colors and shades.

• DOA Trigger feels pretty decent, not too long or heavy.

• Comes with 3 total magazines you can preload ready for use.

• Super non-complicated design. Once loaded with CO2 and Paintballs or Rubber Balls, all you need to do is hit the CO2 knob and then pull the trigger.

• Build quality feels good, the gun is fairly beefy but not overly heavy.

• Grip is normal size even thought the gun itself is fairly large.

Cons:

• Mostly all plastic build.

• Sights are not adjustable so hopefully it is well centered out of the box.

• Do not expect a lot of shots per CO2. Will find out when I do my Field Test Shooting Review.

View fullsize

Comments:

The Umarex T4E TR68 .68 Caliber Paintball Revolver is an interesting Paintball gun, overseas versions are marketed as the HDR86 which stands for “Home Defense Revolver”, while the North American or Canada version is marketed as the TR68 for “Training Revolver”. This is mainly because in Europe most countries are not allowed to own real handguns but can own “Self Defense handguns”. In the US real handguns are very easy to obtain and can be used for self defense. Just across the border here in Canada we can not really purposely have on hand anything that we plan to use as a weapon for self defense so the Umarex T4E TR68 .68 Caliber Paintball Revolver, like the TR50 is marketed as a Training Revolver. What’s the difference? Not much, our North American 230+ fps version is a lot like the lower powered German versions in terms of power but you can also get more powerful versions in the UK. All that said, the Umarex T4E TR68 .68 Caliber Paintball Revolver at least here in Canada is made and marketed as a Training Paintball gun maybe not all that suitable on the field? What you decide to do with it is up to you.

• Buy the Umarex T4E TR68 .68 Caliber Paintball Revolver in Canada

• Buy the Umarex T4E TR68 .68 Caliber Paintball Revolver in the US

In this Replica Airguns Unboxing Video I take a look at 6 Airguns consisting of 2 Paintball Pistols, 3 Airsoft Rifles and one Pellet Rifle. This is not a full review in any way but is rather a preview of what i will be doing full Reviews for over the next several weeks.

View fullsize

Umarex T4E HK VP9 .43 Cal Paintball Pistol:

• Manufacturer: T4E Umarex

• Type: .43 Cal. Paintball Pistol

• Action: CO2 Blowback DOA

• FPS: 300+

• Ammunition Capacity: 8 Rounds

View fullsize

Umarex T4E TR68 .68 Cal Paintball Revolver:

• Manufacturer: T4E Umarex

• Type: .68 Cal. Paintball Revolver

• Action: CO2 Revolver DOA

• FPS: 300+

• Ammunition Capacity: 5 Rounds

View fullsize

Specna Arms Core SA-CO2 AEG Airsoft Rifle:

• Manufacturer: Spec Arms

• Type: .6mm Airsoft BB

• Action: AEG Semi/Full Auto SAO

• FPS: 410

• Ammunition Capacity: 450 Rounds

View fullsize

Bear River Black Ops SR4 AEG Airsoft Rifle:

• Manufacturer: Bear River

• Type: .6mm Airsoft BB

• Action: AEG Semi/Full Auto SAO

• FPS:400

• Ammunition Capacity: 300 Rounds

View fullsize

S&T Armament KAR 98K Spring Airsoft Rifle:

• Manufacturer: S&T Armament

• Type: .6mm Airsoft BB

• Action: Bolt Spring Action SAO

• FPS:400

• Ammunition Capacity: 11 Rounds

View fullsize

Beeman Black Panther Break Barrel Pellet Rifle:

• Manufacturer: Beeman

• Type: .177 & .22 Cal. Pellets

• Action: Break Barrel Spring Piston SAO

• FPS:495

• Ammunition Capacity: 1 Round

View fullsize

Cost:

Airguns are generally cheaper to buy and for sure cheaper to shoot. Airguns can cost as little as $50-100 to buy while real guns in similar models will cost many time more. Cost of ammo is so much less expensive than Real Gun ammo by a mile!

View fullsize

Difficulty to Obtain:

Airguns in most countries do not require any licensing or registration. Generally there are more available options in Airgun choices than Real Gun choices as restrictions often prohibit many Real Guns to be obtained.

View fullsize

Places to Shoot:

Unless you live in a super remote locations and your laws allow you to shoot Real Guns in those locations, then in most cases you can shoot an Airgun almost anywhere within reason. You can even shoot certain Airgun models in your basement. Airsoft is a great option for indoor shooting as the plastic ammo does not carry very much energy so with minimal effort you can make a backstop that will trap the ammo very well.

View fullsize

Trigger Time:

Because ammo is much less expensive and places you can shoot are easier to find, you can get a lot more Trigger Time under your belt which will also improve your shotgun with Real Guns and after all it’s just fun to shoot guns even if they are Airguns.

View fullsize

Safety:

I am not talking about safety in terms of protection. I am talking about safety as in if you do something stupid and your Gun goes off accidentally. If you accidentally fire your Airgun indoors, the bullet will not travel through floors or walls and potentially harm or kill someone on the other side. If you do manage to shoot yourself with an Airgun, the consequence are much less severe than shooting yourself with a Real Gun. That said, always treat an Airgun as if it was a Real Loaded Gun, as server injury and even death can occur even with an Airgun.

View fullsize

Ware Games and Training Situations:

There is no way you can use a standard Real Gun to shoot at people, unless extensively altered with special parts that make the Real Gun unusable to shoot live ammo. With Airguns you have the choice of using an Airsoft or Paintball gun that are both designed specifically for this purpose.

View fullsize

Pest Control:

If you have the need for pest control in an urban area where you do not want a stray bullet to travel too far or penetrate buildings if a shot where to go awry, then an Airgun designed for accuracy and power may be perfect for the job. Accuracy with target and hunting Airguns is on par if not better than many Real Guns and are have powerful enough to kill a pest humanely without having too much power for the job and having to worry as much about your background.

View fullsize

Prop Guns:

As mentioned already, Airguns can look a lot like Real Guns, so they are perfect to be used as a stand-in or Prop Gun when you need to simulate the look and function of a Real Gun. Again they are easier and cheaper to obtain and if something does go wrong, the consequences are much less severe.

View fullsize

Social Stigma:

Unfortunately Real Guns and perhaps any gun these days are looked upon with a social stigma as being the cause of the Crime rather than a tool used in a Crime. And so people blame Guns for these crimes rather than the people committing these crimes. If a person is motivated enough to do something bad, they are going to do it either way and will use whatever means is available to them to commit these Crimes. Including other means like: Knives, Blunt Objects, Poisons, Vehicles, Explosives… Sad but true! Airguns are not used in homicides or mass shootings as they are completely underpowered for a crime like this. They can however be used in crimes as a show of threat, as they do look a lot like real guns, generally people that use Airguns for real crimes, if challenged will give up immediately as they are completely outgunned. Don’t bring an Airgun to a Real Gun fight, you have better chance with a knife!

View fullsize

Type: Paintball Shotgun.
Manufacturer: Umarex - T4E.
Model: Umarex T4E HDB.
Materials: Metal & Polymer.
Weight: 5.52 pounds (2.5 kg).
Barrel: 18.5 inches (470.5mm) Metal smooth bore.
Power Source: 1x12 gram CO2.
Action: Semi Auto DOA with Internal Magazine.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 16 Rounds.
FPS: 220 claimed

View fullsize

Trigger Pull: The trigger pull on Umarex T4E HDB .68 Caliber Paintball Shotgun is basically a Double Action Only Trigger as there is no blowback or way in which to preload a hammer or striker system. So basically your finger does all the work so the trigger pull is I would say about medium length and about medium pull. It does works just fine for fairly rapid follow up shooting. Each pull of the trigger also extends a rear breach-like tube that seals off the CO2 from the internal magazine or there would be a lot of CO2 leakage.

View fullsize

Accuracy: Normally I do not get the chance to perform the Field Test before making my Table Tope Video Review but with the Umarex T4E HDB .68 Caliber Paintball Shotgun, I did it the other way around so I do have performance metrics I can share with you, at least summarized. I suggest watching my Full Field Test Shooting Video Review for the Umarex T4E HDB .68 Caliber Paintball Shotgun for a the full breakdown. In summary, the Umarex T4E HDB .68 Caliber Paintball Shotgun shot a bit low on the target but had a decent grouping of I would say around 4-6 inches which is really good for a Paintball Gun. In terms of power my Chronograph results shooting 5 rounds produced an average of 176fps but the temperature was not super warm so in warmer conditions you can expect this to go up a bit, I would say 200fps is realistic.

View fullsize

Build Quality: The build quality of the Umarex T4E HDB .68 Caliber Paintball Shotgun is really good for the lower price of this unit compared to other higher priced T4E products, you will get a pretty much all plastic outer shell. That said there is still a fair amount of metal in this PaintBall Shotgun including the barrel, internal magazine, sights, trigger, sling mounts and some internal parts. All in all the Umarex T4E HDB .68 Caliber Paintball Shotgun has a good weight and feel to it with nice fit and finish.

View fullsize

Realism: The Umarex T4E HDB .68 Caliber Paintball Shotgun as far as I know is not an exact replica of any specific Shotgun but it does look like what you would expect to see from a Pistol Grip Tactical Styled Shotgun. In terms of mechanical working parts everything does what it supposed to do and works as expected.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

Pros:

• Accuracy was really good, probably my tightest grouping so far to date with a Paintball Gun shooting at 30 feet away.

• Lots of mounting option for accessories like a tac light, laser or other sighting option with it’s top and side picatinny rail and M-LOK setup.

• Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out over time.

• Simple to use Cross Bolt Safety.

• Nice high capacity super easy to load 16 round magazine.

• Ambidextrous sling mountain points.

• Low cost for what you get compared to other Umarex/T4E products.

• Build quality feels pretty good considering it is a much lower cost than other T4E rifles/shotguns.

• Looks very intimidating.

View fullsize

Cons:

• Mostly plastic external build.

• Sights are not adjustable.

• Will not get lots of shots per single CO2.

• No rear stock so will not be as accurate using a non rested shooting posting.

Comments:

The Umarex T4E HDB .68 Caliber Paintball Shotgun is a well built and decent performing Paintball Shotgun and for the price you do get a lot of gun for your money. In some ways it even outperforms the HDX in my books including lower price, ease to load, quicker follow shots being semi auto, more compact size and even accuracy was better with the Umarex T4E HDB .68 Caliber Paintball Shotgun. So if you’re on a budget, don’t feel like you are compromising at all here, you are getting a really good Paintball Shotgun solution!

• Buy the Umarex T4E HDB .68 Caliber Paintball Shotgun in Canada

• Buy the Umarex T4E HDB .68 Caliber Paintball Shotgun in the US

View fullsize

In this Field Test Shooting Video I test out the Umarex T4E HDB .68 Caliber Paintball Shotgun to see what the actual fps is and what kind of accuracy we can get out of these .68 Caliber Rubber balls at 30 feet down range. I have not done a Table Top Video just yet for the Umarex T4E HDB .68 Caliber Paintball Shotgun so stay posted for that upcoming video so stay posted for that, in the meantime you can watch my Preview Videos where I do show it up and close and go over some main specifications.

Starting with the velocity portion of this video I used .68 caliber rubber balls which are not super heavy and not made out of a very hard rubber as you can squish them with your fingers fairly easily. I put 5 rounds through my chronograph after loading a pair of 12 gram CO2 cartriges into the CO2 chamber. My results averaged 176fps which may seem slower than expected but they did hit my target pretty hard pulling the paper in with them. Each round was fairly consistent ranging from 167 to 182 fps trailing off a bit after each shot which is expected.

View fullsize

Moving on to the accuracy portion for the Umarex T4E HDB .68 Caliber Paintball Shotgun, I proceeded to shoot around 10 rounds into my fresh paper target setup 30 feet down range. My target is basically an 8.5 x 11 sheet of paper and my goal was ot get all my shots onto the paper which I easily managed. I was impressed with the grouping from the Umarex T4E HDB .68 Caliber Paintball Shotgun as it performed better than most Paintball guns using rubber balls. The shot placement was a bit lower than I was aiming but all the rounds where within I would say 4-5 inches of each other with no real outliers in the grouping.

All in all the Umarex T4E HDB .68 Caliber Paintball Shotgun performed better than I was expecting, I bit more fps would be nice but the rubber balls do hit the paper with a fair amount of energy, I would for sure not want to get hit by one at close range with light clothing on. The accuracy again was really good for a a paintball rifle and this being one of the lower cost Umarex T4E rifle/shotgun based products it performed as good if not better than much higher priced versions. If you’re looking for a fun Paintball Rifle that won’t break the bank and has a good feature set then pick one up for us!

• Buy the Umarex T4E HDB .68 Caliber Paintball Shotgun in Canada

• Buy the Umarex T4E HDB .68 Caliber Paintball Shotgun in the US

In this Preview Review Video I take a look at 4 newer products now in our Replica Airguns Online Store. One is a 4.5mm Steel BB Revolver, two are 6mm Airsoft Pistols and one is a .68 caliber Paintball Shotgun.

View fullsize

The first item I take look at in this video is the Umarex HK30 AEG Airsoft Pistol, this product is pretty entry level with analyst all plastic build and is very light to hold. It does however shoot in both semi and full auto since it is an AEG Airsfto Pistol (not many of them out there). The fps is rather low at a claimed fps at just under 200, the Umarex HK30 AEG Airsoft Pistol also comes with two 16 round remove; plastic magazines. Who knows, maybe it will be fun?

View fullsize

Next I take a look at the ASG Dan Wesson 2.5 inch 4.5mm Steel BB Gold Revolver. This is a CO2 powered shell loading BB revolver very much like similar ones I have reviewed in the past but in Gold finish. Will the gold finishes make it perform better, well I guess we better find out!

View fullsize

I then take a look at a “Glock Like” CO2 Blowback Airsoft Pistol for KJWorks called the KP13. It has a full size drop out metal magazine that holds the CO2 along with 24 rounds of 6mm Airsoft BB’s. The KJWorks KP-13 has a metal slide, metal magazine and polymer frame with a velocity over 360fps using the included barrel extension.

View fullsize

Last but perhaps the most interesting for me is the Umarex T4E HDB which is a lower cost Paintball/Rubber Ball Shotgun which could possibly be used for home protection? The T4E HDB is a mostly plastic constructed rifle with decent weight to it and uses an internal spring fed 16 round magazine. You will find all kinds of mounting points for accessories and for a sling on the Umarex T4E HDB and again at much lower cost than similar T4E rifle based Paintball/Rubber ball Airguns.

View fullsize

In this Field Test Shooting Video I test out the Umarex T4E HDX .68 Paintball Shotgun to find out what the actual fps is and if .68 Caliber Rubber Balls shot out of this Paintball gun are even going to be somewhat accurate at 30 feet out? If you have not already watched my Table Top Video where I go over the details and specifications with some closer up video showing you around the Umarex T4E HDX .68 Paintball Shotgun then make sure to watch it here…

Starting with the velocity portion of this video I used .68 caliber rubber balls which are not super heavy and not made out of a very hard rubber as you can squish them with your fingers fairly easily. I put 5 rounds through my chronograph after loading a pair of 12 gram CO2 cartriges into the CO2 chamber. My results averaged 206 fps which may seem slower than expected but they did hit my target pretty hard and actually knocked the cardboard backing right off of it. Each round was fairly consistent ranging from 203 to 210 fps.

View fullsize

Moving on to the accuracy portion of this test I proceeded to shoot around 10 rounds into my fresh paper target setup 30 feet down range. My target is basically an 8.5 x 11 sheet of paper and my goal was ot get all my shots onto the paper which I managed successfully. I would say most of the rounds all hit within about 5-6 inches of each other which for a Paintball Gun is very good! Keep in mind I was shooting using a seated position with the Umarex T4E HDX .68 Paintball Shotgun rested up front on a sand bag.

All in all the Umarex T4E HDX .68 Paintball Shotgun performed really well shooting consistent velocities and also getting all the rounds on an 8.5 x 11 inch target easily at 30 feet away which means if you where shooting at a persons body area you would easily hit it every shot making this a decent close quarters shooter which is what it really would be used for at the end of the day. Could you use it for less lethal home defense? I guess so especially if you can get your hands on pepper balls but I am not sure if regular rubber or paintballs balls would stop someone? Just seeing this impressive shotgun may in fact be more of a deterrent then being shot by it, but if it get’s the job done then why not.

• Buy the Umarex T4E HDX .68 Paintball Shotgun in Canada

• Buy the Umarex T4E HDX .68 Paintball Shotgun in the US

View fullsize

Type: Paintball Shotgun.
Manufacturer: Umarex - T4E.
Model: HDX .68 Paintball Shotgun.
Materials: Metal & Polymer.
Weight: 6.8 pounds (3.100 kg).
Barrel: 16.2 inches (411.5mm) Metal smooth bore.
Power Source: 2x12 gram CO2.
Action: Pump Action with Internal Magazine.
Ammo Type: .68 Caliber Paintball or Rubber Ball.
Ammo Capacity: 16 Rounds.
FPS: 250-360?

View fullsize

Trigger Pull: The trigger pull on Umarex T4E HDX .68 Paintball Shotgun is a single action only trigger that requires the Pump Action to engage the trigger. Without working the pump the trigger is in the rear portion and does not operate until the Shotgun is pumped, then it pops forward and becomes active. At that point I would say it is fairy short and light, maybe with a little bit of friction but not bad overall. There is also a cross-bolt safety right behind the trigger making it easy to engage and disengage the safety.

Accuracy: So far I have not had the opportunity to test the Umarex T4E HDX .68 Paintball Shotgun but plan a full Field Test Shooting Video shortly. As with most Paintball Airguns they are not going to be super accurate even at 30 feet away. Generally speaking most tests I have done with Paintball guns using rubber balls perform about the same with most of the rubber balls hitting my paper sheet target (8x11) but some even missing completely. In terms of power, on the box Umarex claims 250 fps but I have seen higher velocity specifications on websites including our own so I guess we will find out for sure when I perform my Field Test Shooting Video for the Umarex T4E HDX .68 Paintball Shotgun,

View fullsize

Build Quality: The build quality of the Umarex T4E HDX .68 Paintball Shotgun is very good since this Paintball Shotgun is made for military and law enforcement training use. It has a very good weight and feel to it and has metal parts where you would expect them including the receiver. If you picked this item up along with a real steel Shotgun it would be hard to tell or feel the difference at first inspection.

Realism: The Umarex T4E HDX .68 Paintball Shotgun as far as I know is not an exact replica of any specific Shotgun but it does look like what you would expect to see from a Tactical Styled Pump Action Shotgun. In terms of mechanical working parts everything does what it supposed to do and works as expected.

Purchase it from the Canada Replica Airguns Store or the US Replica Airguns Store

View fullsize

Pros:

• Expected fairly high fps power of 350+ with .68 caliber paintballs/rubber balls, a bit too high for your average paintball field but perhaps powerful enough to discourage an extruder?

• Lots of mounting option for accessories like a tac light, laser or other sighting option with its upper and lower picatinny rail setup.

• Quick CO2 pierce system so you can leave a CO2 in it ready to go any time with no worries about CO2 leaking out.

• Simple to use Cross Bolt Safety.

• Nice high capacity 16 round internal magazine.

• Dual CO2 offers more shots per CO2 change.

• Build quality feels really good, very solid, with lots of weight to it.

• Very intimidating looking, just that alone may scare off an intruder.

View fullsize

Cons:

• Need a tool to load rounds.

• Will not get lots of shots per dual CO2, around 70 or so but not bad.

• A bit on the large and bulky side.

View fullsize

Comments:

I am not sure exactly what one would use this Paintball Rifle for but there are a few options. You could use it on the field but with everyone else using high capacity rapid fire Paintball Guns you might be “Out Gunned” to say the least unless of course everyone else was limited in some way to their ammo capacity and rate of fire. Again the Umarex T4E HDX .68 Paintball Shotgun could be used as a non lethal home defense option when combined with the right ammunition type like say some pepper balls? The look of this Shotgun is probably enough to make an intruder get the heck out but I would not count on it. No matter what you plan to use it for it is an awesome Paintball Airgun for sure but just be aware if is not going to be the cheapest option at around $450 Canadian.

• Buy the Umarex T4E HDX .68 Paintball Shotgun in Canada

• Buy the Umarex T4E HDX .68 Paintball Shotgun in the US