USA Flag US Store
Canada Flag Canada Store

Replica Airguns CA & US Stores

Entries in Comparison,Break Barrel

Umarex T4E TP50 Gen 2 CO2 Paintball Pistol Table Top Review

No Comments

In this table top review, we’re taking a look at the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol, part of Umarex’s T4E (Training for Engagement) lineup. This version is marketed more as a tactical training pistol, while its nearly identical counterpart, the HDP50, is positioned toward home defense.

At first glance, the TP50 and HDP50 look almost identical. The main visual difference is that the TP50 comes in an all-black finish, while the HDP50 features an orange slide. Beyond that, the functionality, performance, and specs are essentially the same.

Key Features and Specifications

  • Manufacturer: Umarex

  • Model: T4E TP50 Gen 2

  • Caliber: .50 caliber

  • Power Source: 12g CO2 (quick piercing system)

  • Action: Semi-auto, double action trigger

  • Magazine Capacity: 6 rounds (internal inline magazine)

  • Velocity: Rated up to 465 FPS

  • Energy: Claimed 11 joules (can be higher depending on ammo)

  • Barrel Length: ~4 inches

  • Overall Length: ~8 inches

  • Weight: ~1.5 lbs (0.7 kg)

  • Construction: Polymer frame and slide with metal internals and barrel

  • Safety: Integrated trigger safety

  • Rail: Under-barrel Picatinny rail

  • Sights: Fiber optic front and rear

Overview and First Impressions

The TP50 Gen 2 is a compact, .50 caliber paintball-style pistol designed for training, recreational shooting, and less-lethal applications. It has a solid feel in the hand, not too heavy, not too light, and resembles a full-size handgun profile, similar in size to a large-frame pistol.

Despite its polymer exterior, the internal components that matter, especially around the CO2 system—are metal, giving it durability where needed.

CO2 System (Quick Piercing Feature)

One of the standout features is the quick piercing CO2 system:

  • Insert the CO2 cartridge (butt-first)

  • Tighten the cap until snug

  • When ready to use, give the bottom a firm “whack”

  • A pin pops out on the back where you can see it to indicate the system is pressurized

This allows you to keep the pistol loaded but not activated, which is useful for storage or readiness situations.

Ammo Compatibility

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol supports a wide range of .50 caliber ammunition, including:

  • Rubber balls

  • Powder balls

  • Paintballs

  • Steel/rubber hybrid balls

  • Pepper balls (limited availability in Canada)

Performance varies significantly depending on the weight of the projectile:

  • Lighter rubber balls: ~450 FPS / ~13–15 joules

  • Heavier projectiles: lower energy (down to ~7–11 joules)

What’s Included

  • TP50 Gen 2 pistol

  • Two tubes of 10 rounds each (powder + rubber balls)

  • Barrel cleaning squeegee

  • Instruction manual

  • Cardboard packaging (blue “tactical pistol” branding)

Walkaround Highlights

  • Fiber optic sights make target acquisition easy in various lighting conditions

  • Textured grip and slide for solid handling

  • Metal trigger with integrated safety

  • Wide open barrel design

  • Picatinny rail for adding lights or lasers

  • Clear “Strike” marking for CO2 activation point

Overall, it’s a clean, functional design with a tactical look, especially in the all-black version.

Pros

  • Compact size compared to other .50 cal pistols

  • Wide variety of compatible ammo types

  • Quick piercing CO2 system (very practical)

  • Good power for its size (~11–15 joules range)

  • Fiber optic sights improve usability

  • Picatinny rail for accessories

  • Realistic all-black tactical appearance

Cons

  • Only 6-round capacity before reload

  • Limited shots per CO2 (~3–4 reloads)

  • Internal magazine (no quick mag swaps)

  • Pepper ball ammo difficult to source in Canada

  • Efficiency trades off for higher power

TP50 vs HDP50 (Quick Comparison)

  • TP50: All black, marketed as tactical training

  • HDP50: Orange slide, marketed for home defense

  • Performance: Essentially identical

This difference is largely cosmetic and marketing-driven, so choosing between them comes down to preference and intended use.

Final Thoughts

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol is a solid, compact .50 caliber CO2 pistol that delivers respectable power in a manageable platform. It’s not designed for high-capacity shooting or efficiency, but rather for impact, simplicity, and versatility in ammo choice.

If you’re looking for a less-lethal option or a training pistol with realistic handling and solid performance, the TP50 fits that role well, especially if you prefer the more discreet all-black tactical look.

Where to Buy

Categories: .50 cal, CO2, Comparison, Paintball, Pistol, Review, Semi Auto, Vimeo Video, YouTube Video Tags: Umarex, T4E, T4E TP50, TP50

Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle Table Top Review

No Comments

In this table top review, we’re taking a close look at the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This model fits into a long lineage of classic lever-action BB rifles, alongside well-known options like the Daisy Red Ryder and the Marlin variants from Crosman and Umarex. These rifles all share a similar concept, simple, spring-powered, lever-action BB guns designed for training, plinking, and beginner shooters, but each brings its own subtle differences in materials, styling, and features.

Key Specifications

  • Model: Air Venturi Annie Oakley Lil’ Sure Shot

  • Type: Lever Action Spring Piston BB Rifle

  • Caliber: 4.5mm Steel BB

  • Power Source: Spring (No CO2 Required)

  • Velocity: Up to 350 FPS

  • Magazine Capacity: 550 Round Internal Reservoir (Gravity Fed)

  • Action: Lever Action

  • Safety: Cross Bolt Safety

  • Barrel: Smoothbore

  • Stock: Stained Solid Wood

  • Construction: Primarily Metal with Some Plastic Components

  • Weight: Approx. 3.3 lbs

  • Overall Length: ~36.25 inches

  • Optics Rail: Removable Weaver/Picatinny Style Mount

First Impressions & Build Quality

The Annie Oakley Lil’ Sure Shot stands out with its classic Western styling, enhanced by engraved Annie Oakley branding on the wood stock. It’s a step above many entry-level BB rifles thanks to its real wood stock and metal lever, giving it a more authentic and durable feel compared to fully plastic alternatives.

Most of the rifle is metal and wood, though there are a few plastic components:

  • Trigger

  • Front sight (on the newer version)

  • Adjustable portion of the rear sight

  • Removable scope rail

Overall, it feels solid in the hands, lightweight, and well-balanced, especially for younger shooters or anyone new to lever-action rifles.

How It Works

This is a spring-piston, lever-action BB rifle, meaning:

  • No CO2 or gas is required

  • Each shot is powered by cocking the lever

  • BBs are stored in a large internal reservoir

  • You must tilt the rifle upward to gravity-feed BBs into position

With a 550-round capacity, you can shoot for quite a while before needing to reload, your arm will likely get tired before you run out of ammo.

Handling & Usability

This rifle is clearly designed with accessibility in mind:

  • Lightweight (3.3 lbs) makes it easy to handle

  • Shorter length and pull fits smaller shooters well

  • Moderate cocking effort is manageable for beginners

  • Lever action slows firing rate, adding a safety advantage for new users

Rifles like this are excellent for training because:

  • They are easier to aim than pistols

  • They encourage controlled shooting

  • They are not overly powerful

Even for experienced shooters, these are simply fun and inexpensive for backyard plinking.

Sights & Optics

Out of the box, the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle includes:

  • Fixed front sight (plastic on newer version)

  • Adjustable rear sight (elevation only)

One notable feature is the removable Weaver-style rail, allowing you to:

  • Mount a red dot or scope

  • Or remove it for a more traditional look

Keep in mind the rail is plastic, so care should be taken when mounting optics.

Comparison to Similar BB Rifles

This rifle sits in the same category as:

  • Daisy Red Ryder – The original classic

  • Umarex Marlin Lever Action – Slightly more adult-oriented design

  • Crosman Marlin (older models) – Direct Red Ryder competitor

All of these:

  • Use lever-action spring systems

  • Have internal BB reservoirs

  • Shoot in the ~300–350 FPS range

The Annie Oakley version distinguishes itself with:

  • Better visual styling

  • Wood and metal construction

  • Optional optics mounting

New vs Older Annie Oakley Version (Key Differences)

If you come across different versions, here are the main distinctions:

Newer Version:

  • Longer barrel

  • Plastic front sight

  • Larger loading port (easier to load)

  • Metal Lever

  • Brighter, more polished wood finish

Older Version:

  • Shorter barrel

  • Metal front loading system (rotating port)

  • Metal front sight (more durable)

  • Plastic Lever

  • Slightly darker, more matte wood

Both should perform similarly, but the newer version is a bit more refined with that quality all metal lever.

Pros

  • Lightweight and easy to handle

  • Real wood stock and metal lever construction

  • Large 550-round capacity

  • No CO2 required (low maintenance and inexpensive to shoot)

  • Removable optics rail for flexibility

  • Classic Western styling with Annie Oakley branding

  • Great for beginners and younger shooters

Cons

  • Plastic front sight (new version)

  • Lower power compared to CO2 rifles

  • Rear sight only adjustable for elevation

  • Slightly higher price than some entry-level similar BB rifles

  • Less realistic than shell-ejecting lever-action models

Final Thoughts

The Air Venturi Annie Oakley Lil’ Sure Shot is a well-built, visually appealing lever-action BB rifle that blends classic styling with modern usability.

It’s ideal for:

  • Beginners and younger shooters

  • Backyard plinking

  • Anyone wanting a simple, reliable and fun BB rifle

While it doesn’t aim for full realism like higher-end shell-ejecting models, it delivers where it matters, ease of use, affordability, durability, and fun factor.

Available at:

Also check out ReplicaAirguns.com for additional articles, photos, and video reviews.

Categories: 4.5mm / .177 cal, BB, Comparison, Repeater, Review, Rifle, Spring Piston, Vimeo Video, YouTube Video Tags: Air Venturi, Annie Oakley Lil Sure Shot, Red Ryder

Steambow B08 .68 Caliber Tactical Crossbow Table Top Review

No Comments

In this table top review, we take a close look at the Steambow B08 .68 Caliber Tactical Crossbow, a compact and versatile system designed for shooting rubber balls, paintballs, or foam projectiles. This model is particularly suited for controlled environments like indoor ranges (such as a sea can setup or even basement or backyard), thanks to its relatively moderate power and flexible ammunition options.

A full shooting test will follow separately, but for now, let’s break down the specifications, features, and what comes in the box.

Specifications

  • Model: Steambow B08

  • Caliber: .68 (rubber balls, paintballs, foam balls, etc.)

  • System Type: Recurve crossbow

  • Draw Weight: 35 lbs (standard included limb)

  • Velocity: Up to 260 FPS (manufacturer claim)

  • Energy: Approx. 7 ft-lbs (up to ~15 ft-lbs with stronger limbs)

  • Magazine Capacity: 8 rounds (removable)

  • Weight: Just under 4 lbs

  • Length: 24.2 inches

  • Width: 3.15 inches (body, excluding limb span)

  • Height: 8.3 inches

  • Materials: Fiberglass, metal, and polymer construction

  • Stock: AR-style adjustable (6-position) with cheek rest and rubber butt pad

The B08 is distributed by Steambow GmbH (Austria) and is built on a modular platform compatible with other Steambow systems like the M10.

Key Features

Modular Platform

One of the standout aspects of the B08 is its modular design. The lower receiver is identical to the Steambow M10, meaning you can swap uppers to shoot either:

  • .68 caliber balls (B08 upper)

  • Crossbow bolts (M10 upper)

This gives users flexibility to adapt the platform for different uses.

Quick Change Limb System

The included 35 lb limb is easy to swap out:

  • Secured by a single bolt

  • Can be upgraded up to heavier options (up to ~120 lbs available)

  • Allows tuning for power vs. ease of cocking

Magazine-Fed Repeater System

  • 8-round removable magazine

  • Spring-fed system with follower

  • Auto-loading mechanism (not semi-auto, but fast cycling)

The system works by “breaking” or pulling back the stock, which:

  • Cocks the string

  • Loads the next round

  • Prepares the trigger

Cocking Mechanism

  • Shoulder-supported operation

  • Pull stock inward to cock

  • Very easy with 35 lb limb

  • Allows relatively fast follow-up shots once familiar

Sighting System

  • Fiber optic front sight

  • Rear alignment via top trough channel

While simple, it works well for close-range shooting. However, the included Picatinny rails (top and bottom) allow for:

  • Red dots

  • Scopes

  • Tactical accessories

Build & Ergonomics

  • Polymer lower with reinforced components

  • AR-style adjustable stock

  • Adjustable cheek rest

  • Rubber butt pad

  • Included foregrip (user-installed)

Overall, the Steambow B08 .68 Caliber Tactical Crossbow has a solid, lightweight feel while still maintaining good handling characteristics.

What’s Included in the Box

The B08 comes well-packaged with multiple internal boxes and includes:

  • Steambow B08 main unit

  • 35 lb limb

  • Foregrip

  • 8-round magazine

  • 25 “foam” balls (closer to hard nylon in feel)

  • Protective shooting glasses

  • Allen keys (for assembly and adjustments)

  • String wax

  • Extra string

  • Mounting hardware

  • Instruction manual

Note:
A small locking component for the upper assembly may come separate and is not clearly explained in the manual, but is required for proper function.

Operation Overview

  • Load magazine with up to 8 rounds

  • Insert magazine into front housing

  • Cock by pulling stock inward

  • Fire using single-action trigger

The ball is held in place by a simple groove and string system, guiding it forward during firing.

Performance Notes (Initial Impressions)

  • Smooth and reliable operation

  • Easy to cock with 35 lb limb

  • Suitable for indoor shooting environments

  • Compatible with various projectile types

Heavier limbs will:

  • Increase velocity and energy

  • Require more effort to cock

Pros

  • Lightweight and compact (under 4 lbs)

  • Modular system (compatible with M10 platform)

  • Magazine-fed repeater design

  • Easy cocking with included limb

  • Quick-change limb system

  • Picatinny rails for accessories

  • Comes with useful extras

  • Quiet operation

  • Reusable ammunition options

Cons

  • Higher price point

  • No traditional rear sight included

  • Learning curve for efficient operation

  • Included limb may feel underpowered for some users

Final Thoughts

The Steambow B08 offers a unique blend of crossbow mechanics and tactical styling, combined with modular flexibility and relatively safe indoor usability. It’s especially appealing for users who want:

  • A reusable ammo platform

  • Quick follow-up shots

  • Expandability with other Steambow systems

While the included 35 lb limb keeps it easy to use and accessible, upgrading the limb will unlock more performance potential for those looking for higher energy output.

Availability

Available through Replica Airguns:

A full shooting test and performance breakdown will follow in a separate review.

Categories: .68 cal, Break Barrel, Crossbow, Non Airguns, Paintball, Review, Vimeo Video, YouTube Video, Repeater Tags: Steambow, B08

Sig Sauer P229 CO2 Blowback .177 Caliber Pellet Pistol Table Top Review

1 Comment

In this Table Top Review we’re taking a close look at the Sig Sauer P229 CO2 Blowback Pellet Pistol. This is the tabletop portion only, no shooting in this review as my Field Test Shooting Video will follow later on.

If you’re familiar with the Sig Sauer ASP P226 platform, the P229 version is the same general system in a more compact package, with one major upgrade: it’s optics-ready!

Specifications

  • Manufacturer: SIG SAUER

  • Power Source: 12g CO2

  • Ammunition: .177 pellets (also supports steel BBs)

  • Action: Semi-auto, blowback

  • Trigger: DA/SA (double action / single action)

  • Magazine: 16 rounds (twin 8-shot rotary clips, loaded on both ends)

  • Barrel: Rifled inner barrel

  • Sights: White dot sights

  • Safety: Manual safety lever with de-cocker function

  • Claimed Velocity: up to ~380 fps (real-world varies with temperature and cadence)

  • Shots per CO2: roughly 50–60 (varies with temperature/cadence)

  • Weight: 35.2 oz / 1.0 kg (2.2 lb)

  • Overall Length: 7.7 in (P229)

  • Optics: optics-ready slide / SIG AIR reflex-sight mounting provision

  • Muzzle threads: M14x1 CCW

In the Box

  • P229 CO2 blowback pellet pistol

  • Manual

  • Sight/plate parts for the SIG AIR reflex mounting setup (for red dot use)

P226 vs P229 - What’s Different?

These two share the same general operating system (CO2 blowback, DA/SA, rotary-mag that works with pellets/BBs), but the P229 version changes a few important things:

Key Differences

  • Size: P229 is shorter (7.7 in) vs P226 (8.25 in).

  • Weight: P229 is lighter (35.2 oz / 2.2 lb) vs P226 (~39.1 oz).

  • Optics: P229 is optics-ready (SIG AIR reflex mounting provision); P226 platform is typically not.

  • Muzzle threads: P229 uses M14x1 CCW (P226 commonly uses a different thread direction/size).

Bottom line: if you liked how the P226 handled and performed, the P229 should feel very familiar, just more compact, with the bonus of being set up for a dot.

Walk-Around & Handling

The P229 has that classic SIG profile and a very “real pistol” feel in the hand, helped by the mostly-metal build and full weight.

Notable features and controls:

  • DA/SA trigger system: long/heavier first pull in double-action, then lighter single-action after the slide cycles.

  • Safety + de-cocker lever: functions like the real-steel concept — you can decock the hammer and run it DA/SA.

  • Accessory rail: for a light/laser (training-style setup).

  • Optics-ready slide: set up to accept the SIG AIR reflex-style mounting system (sight sold separately).

CO2 System and Magazine Notes

One of the standout features on this platform is SIG’s cam-lever, tool-less CO2 loading system, designed to make cartridge swaps quick and easy.

The magazine is a 16-shot design using twin 8-shot rotary clips. Practical tip: make sure pellets are seated properly in the rotary clip so they don’t hang up during cycling.

Pros

  • Mostly metal build with realistic weight and solid feel

  • Compact P229 size (shorter than the P226)

  • DA/SA trigger + functional safety/de-cocker system

  • Blowback action for realism/training value

  • Rifled inner barrel (pellet accuracy potential)

  • Tool-less cam-lever CO2 loading system

  • Optics-ready slide (big upgrade over older-style setups)

  • Accessory rail for light/laser

Cons

  • Fixed/non-adjustable sights

  • CO2 performance is temperature + cadence sensitive (rapid fire cools the system and drops power)

  • No last-round hold-open on this style of rotary-mag system

  • Rotary clips require good pellet seating to avoid occasional feeding issues

Final Thoughts

The Sig Sauer P229 blowback pellet pistol is a very “SIG-like” training/plinking platform: realistic controls, DA/SA operation, snappy blowback, and a compact duty-pistol footprint. The biggest tabletop takeaway is the optics-ready slide, which makes this version feel more modern than older CO2 pellet pistol designs.

Field test shooting (chronograph + accuracy) will follow in the next video.

Available in our Canada Replica Airguns Store. Also check out:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Pellet, Pistol, Review, Semi Auto, Vimeo Video, YouTube Video Tags: Sig Sauer ASP, Sig Sauer, Sig Sauer P229

Replica Airguns SHOT Show 2026 Blue Line Booth

No Comments

I stopped by the Blue Line booth and Connor showed me a line of peppered gel deterrent products they’re hoping to bring into Canada as dog-spray style options (with stronger versions available in the U.S., depending on regulations).

The key difference vs typical pepper spray: these use a jet/propulsion system that fires a more directed stream, designed to reduce blowback and improve placement.

JPX2 Gen 2 (2-shot)

  • Takes a 2-shot cartridge; each trigger pull fires one shot.

  • The cartridge is replaceable after use (Connor emphasized it’s essentially disposable once fired).

  • Connor said range is about 20 ft; manufacturer specs cite roughly 5–23 ft depending on conditions.

4-shot option (JPX4-style)

Connor also showed a 4-shot version aimed at law enforcement markets, but they’re hoping it can be available more broadly as well.

Guardian Angel 4 (compact 2-shot)

A small two-shot, pocketable option with a simple safety and clip—intended as a quick, lightweight grab-and-go device.

Connor also mentioned optional laser sight accessories for better aiming, and that all versions are around the same practical range envelope.

If these can be brought in cleanly for Canada, they look like a good fit for a store + review pipeline: JPX2 Gen 2 for the main feature set, JPX4 for the multi-shot crowd, and Guardian Angel 4 for people who want something ultra-compact and simple.

Categories: CO2, Break Barrel, Non Airguns, Replica Airguns News, Vimeo Video, YouTube Video, Pistol Tags: SHOT Show 2026, SHOT Show, Blue Line

Replica Airguns SHOT Show 2026 Umarex Booth

No Comments

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

  • Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

    • Capacity: 400-round main reservoir + 25-round ready magazine

    • Action: Full auto

    • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

  • Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

    • Feed system: 8-round magazine + 120-round reservoir built into the mag

    • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

  • Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

    • Capacity: 400 BBs

    • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

    • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

  • Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

    • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

    • Caliber: .25 only

    • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

    • Positioning: Built for small game / pest work and “preparedness” minded buyers

    • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

  • S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

    • Power: 12g CO2

    • Magazine: 6-shot standard, extended option mentioned

    • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

    • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

  • HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

    • Capacity: 16 rounds

    • Energy: ~36 joules mentioned

    • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

  • HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

    • Tuning: Adjustable velocity

    • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

    • CO2 options: 88g CO2 or adapters for 12g

    • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

  • New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

    • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

    • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

  • Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

    • Loading: Single-shot

    • Ergonomics: Competition grip + competition styling

    • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

    • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

Categories: Airsoft, AEG, Airsoft News, Airgun News, BB, CO2, Blowback, Break Barrel, Bulk Air, Full Auto, Gas, GBB, Multi-pump, Paintball, PCP, Pellet, Pistol, Pump, Repeater, Replica Airguns News, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston, Vimeo Video, YouTube Video Tags: SHOT Show 2026, SHOT Show, Umarex

Replica Airguns SHOT Show 2026 Barra Booth

No Comments

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

  • New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

    • Caliber shown: .22

    • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

    • Frame/version: brass frame first, with other versions planned.

    • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

    • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

  • 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

    • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

    • Calibers: .22 is the focus (with .177 also planned/available).

  • New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

    • Uses flat bands (easy to swap/upgrade for strength/velocity).

    • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

  • Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

    • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

    • Calibers mentioned/planned: .177 / .22 / .25.

  • New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

    • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

    • Externally adjustable regulator

    • Ambidextrous side lever (convertible)

    • Rotary magazine (prototype shown in .30 cal, 8 rounds)

    • Power testing target: up to ~80 ft-lb in .30 cal

    • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

  • Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

    • Features: adjustable cheek rest, M-LOK fore-end

    • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airgun News, Airsoft, Airsoft News, BB, Blowback, Break Barrel, CO2, Bulk Air, Full Auto, PCP, Pellet, Pistol, Replica Airguns News, Revolver, Rifle, Semi Auto, Silent Auction, Single Shot, Slingshot, Vimeo Video, YouTube Video Tags: Barra, SHOT Show 2026, SHOT Show

G&G L85 Carbine ETU Airsoft AEG Rifle Table Top Review

No Comments

This one’s really growing on me because it’s not your standard AR platform. We review a lot of AR-style rifles (and there’s nothing wrong with ARs, they’re popular for a reason), but this one has a very different vibe. It’s based on the SA80 British service rifle design and comes in a compact bullpup layout that gives you a long inner barrel without needing a long overall rifle.

Today’s Table Top Review is the G&G L85A2 (A2 version) ETU Airsoft AEG Rifle — and yes, a full Shooting / Field Test Video will be coming shortly. I definitely want to get this one out and properly test it.

This model is available in our Canada store. At the time of recording this review, it wasn’t available in the US store, but I’ll add an equivalent/similar US option (or a list of comparable AEG rifles) in the post links.

Specifications:

  • Manufacturer / Distributor: G&G (Made in Taiwan)

  • Replica Of: SA80 / L85A2 (British 5.56×45 NATO service rifle family)

  • Platform: Airsoft AEG (Electric)

  • Ammunition: 6mm plastic airsoft BBs

  • Operation: AEG with simulated blowback (reciprocating bolt for a slight “tap” feel)

  • Fire Modes: Semi / Full Auto (and programmable for 3-round burst via MOSFET programming)

  • ETU System: Programmable MOSFET + Electronic Trigger Unit (ETU)

  • Motor: High-torque motor (rated around 25,000 RPM)

  • Gearbox / Internals: Full metal gearbox, heat-treated metal gear set

  • Bushings: 8mm oilless bushings for smoother gear rotation

  • Hop-Up: Adjustable hop-up (access via dust cover)

  • Trigger: AEG electric trigger (single-action-only style in practical terms)

  • Safety: Cross-bolt safety

  • Sights: Metal, fully adjustable front & rear

    • Front: elevation

    • Rear: windage

    • Rear peep sight includes two aperture sizes

  • Weight: 6.0 lbs (2.7 kg)

  • Overall Length: 27.5 in (70 cm)

  • Inner Barrel Length: 16 in (40.6 cm)

  • Magazine: 450-round high-cap AR-style AEG magazine (AR/M4-style AEG mags should fit)

  • Velocity: Approx. 370–400 FPS with 0.20g BBs (varies by setup/conditions)

  • Top Rail: Yes (carry handle/rear sight assembly sits here; optics possible with a riser)

  • Flash Hider: Metal AR-style, black (no orange tip on this one)

  • Sling Mounts: Multiple mounting points; front appears reversible L/R, rear has mounts on both sides

Build Quality & Materials:

This rifle has a really solid, substantial feel and is nicely balanced. There’s a lot of metal here.

Notable metal parts include (from what you can see and feel):

  • Upper & lower receiver areas

  • Carry handle / rear sight assembly

  • Front & rear sights

  • Magazine (metal high-cap)

  • Trigger guard (metal for sure)

  • Barrel, flash hider

  • Sling mounts, pins/screws, switches and assorted hardware

Polymer / rubber components include:

  • Handguards

  • Pistol grip

  • Cheek rest area (polymer)

  • Butt plate (rubber)

Overall: it looks great, feels great, and doesn’t feel “toy-ish” at all.

In the Box:

  • G&G L85A2 ETU AEG rifle

  • 1× metal high-cap magazine

  • Cleaning rod

  • Product brochure / extra paperwork

  • Transport muzzle cover / cap

  • Manual access via QR scan (links to G&G’s online manual)

Walk Around Notes:

A few highlights from handling it up close:

  • Bullpup layout: compact overall, but the barrel/inner barrel length is still substantial.

  • Sighting system: the carry handle doubles as the rear sight platform with flip apertures.

  • Optics compatibility: you can mount an optic on the top rail, but you’ll likely want a riser so your eye line sits naturally.

  • Dust cover + hop-up access: you can open the cover and access hop-up adjustments the normal AEG way.

  • Charging handle note: my rifle did not come with the charging handle piece. I checked my unboxing footage and it wasn’t on there and it wasn’t in the box. It’s not essential for function, but at this price point it’s something you’ll want to confirm is included on yours.

Battery Compartment:

The battery area is under the handguard, and here’s the main downside:

  • If you’re running a larger battery, you’ll likely need to remove hardware (including the sling mount and a bolt) to open the lower handguard section.

  • With smaller nunchuck-style batteries, you may be able to fit them in with less disassembly, but bigger packs will probably require tools.

So yes: it works, but it’s not a quick tool-free battery swap design.

Quick Function Check:

I did a quick dry-fire demo using a 9.6V battery, and honestly it felt a bit underpowered/odd (some partial taps and inconsistent behavior). That could be the battery itself (mine was not great), but I would suggest this rifle will really come alive with a proper 11.1V LiPo and hope to use this setup in the field test video.

I’ve seen demos where the rate of fire is very high using an 11.1V setup, so that’s what I’ll be testing with for the shooting video.

Pros:

  • Lots of metal in the construction with a super solid weight, feel, and balance

  • Unique bullpup British-style rifle (not just another AR build)

  • Simulated blowback adds a bit of feedback vs. standard AEGs

  • Works with AR/M4-style AEG magazines (easy to find replacements/midcaps/highcaps)

  • Good optics flexibility on the top rail (carry handle sight system included, or add your own)

  • Programmable fire mode: Full Auto or 3-round burst

  • No orange tip (and if you prefer one for visibility, you can always add your own)

Cons:

  • Limited accessory mounting options (mostly just the top rail; not a modern “add rails everywhere” setup)

  • Battery access can require tools and disassembly, especially for larger batteries

  • Priced on the higher side (around $600+ CAD)

  • My sample was missing the charging handle part, check yours when it arrives

Final Thoughts:

This is a really nice AEG. It feels premium in the hands, the two-tone green looks great, and it’s a cool change from the sea of AR platforms, while still keeping things practical with AR-style AEG mag compatibility.

The simulated blowback isn’t going to replace the feel of a true gas blowback rifle, but it’s a nice touch, and paired with the ETU/MOSFET system and upgraded internals, it helps justify why this model sits in a higher price bracket.

Next up: the field test / shooting video, ideally with a proper 11.1V battery so we can see what this rifle really does when it’s running at its best.

Availability:

And remember we carry air guns, BB guns, airsoft guns, pellet guns, blank guns, and accessories in both our Canada and US stores.

Thanks for watching and reading! Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. More videos coming soon…

Categories: 6mm, AEG, Airsoft, Blowback, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: G&G, L85

KJWorks KP-19S CO2 Blowback Airsoft Pistol Table Top Review

No Comments

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

Specifications:

  • Manufacturer: KJ Works

  • Made In: Taiwan

  • Power Source: 12g CO2

  • Ammunition: 6mm Airsoft BBs

  • Action: Semi-auto, full blowback

  • Trigger: Single-action, skeletonized, adjustable (1911-style)

  • Magazine: Full-size dropout metal magazine, 25-round capacity

  • Weight: 1.96 lbs (890 g)

  • Overall Length: 9.84 inches (250 mm)

  • Inner Barrel Length: 4.25 inches (108 mm)

  • Claimed Velocity: 366+ FPS

  • Hop-Up: Adjustable

  • Rail: Under-barrel Picatinny rail

  • Sights: Fiber-optic front and rear

  • Safety: Ambidextrous

  • Magazine Release: Reversible

  • Threaded Barrel: Inner and outer threading

  • Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

In the Box:

  • KP-19S CO2 Blowback Airsoft Pistol

  • Full-size metal CO2 magazine

  • Inner barrel extension

  • Allen keys

  • Small bag of Airsoft BBs

  • Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

  • Same frame, grip, slide profile, trigger guard

  • Same skeletonized trigger and hammer

  • Same magazine compatibility

Key Differences

  • KP-19 (Non-S):

    • Flared magwell

    • Compensator

    • Removable rear plate for mounting a red dot

    • More competition-oriented configuration

  • KP-19S:

    • No flared magwell (cleaner, more streamlined look)

    • Fixed rear sight

    • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

  • Slide cutouts on the top and sides

  • CNC-style gold/brass-colored fluted barrel visible through the slide

  • Fiber-optic sights that are extremely easy to pick up

  • Ambidextrous safety

  • Reversible magazine release

  • Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

Field Strip:

Field stripping follows a classic 1911 takedown:

  1. Align the slide notch

  2. Push out the takedown pin

  3. Remove the slide assembly

Once opened, you gain easy access to:

  • Inner barrel

  • Recoil spring

  • Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

Pros:

  • High metal content with excellent weight and balance

  • Strong, realistic full blowback action

  • Excellent fit and finish typical of KJ Works pistols

  • High-capacity 25-round metal magazine

  • CO2 or gas compatibility (with appropriate magazines)

  • Dual threaded barrel for accessories and extensions

  • Bright fiber-optic sights (easy to acquire on any background)

  • Short, light, adjustable 1911-style trigger

  • Ambidextrous safety and reversible mag release

  • Easy field stripping and hop-up access

Cons:

  • Grip is wide and may not suit shooters with smaller hands

  • Higher price point compared to similar KWC 1911 models

  • Rear sight is not adjustable and does not accept a red-dot plate

    • Optics would need to be rail-mounted from underneath

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Gas, GBB, Pistol, Review, Semi Auto, Vimeo Video Tags: KJWorks, KP-19S, 1911 TAC, 1911

Umarex AER16 AEG Full Auto BB Carbine Table Top Review

No Comments

Type: BB Rifle.
Manufacturer: Umarex.
Model: AER16.
Materials: Metal and plastic build.
Weight: 4.9 pounds (2.2 kilograms).
Length: 32.25-35.5 inches (82-90.2cm).
Propulsion: AEG (with Deans Connectors).
Battery: Comes with an 11.1 V 120 Mac Battery and USB Charger.
Action: Semi & Full Auto.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 55 rounds. (650 shots per battery charge Aprox.)
FPS: 430fps.
Rate of Fire: 450+ rounds per minute in full auto (depending on battery voltage).

Trigger Pull: The trigger on the Umarex AER16 AEG full-auto BB Carbine, like most AEGs, isn’t a purely mechanical trigger. It works as an electrical on/off switch, so it feels more like a light, short single-action pull. You’ll notice a small delay between pulling the trigger and the BB firing because the trigger starts a motor that first pulls the spring and piston back. Once the spring is fully drawn and released, it compresses air that propels the 4.5 mm steel BB. Using a higher-voltage battery reduces that delay, since the motor spins faster and returns the spring more quickly, which also raises the full-auto rate of fire.

Accuracy: I have not Field Test Reviewed the Umarex AER16 AEG full-auto BB Carbine or even tried it out yet so far, I hope to make my Field Test Shooting Video for it as soon as I can as I am very interested in how the AER16 performs compared to the Barra 400e which is a very similar AEG 4.5mm BB firing Airgun. If the AER16 shoots anything like the Barra 400e,I can expect it to shoot pretty close to 400 fps, with near 1 inch 10 round groupings in semi auto and slightly larger groups in full auto. You can checkout my Barra 400e Field test here.

Build Quality: The Umarex AER16 AEG full-auto BB Carbine is metal and Plastic in design with a plastic hand guard and receiver. That said, it does have a lot of metal parts including the barrel, buffer tube, magazine, trigger, charging handle, magazine release, dust cover, inner bolt shield, selector switch, sling mount and other bolts and pins! It feels very solid when holding it and the fit and finishes is really good. Since there is less metal all around then you find with the Barra 400e, this makes the AER16 a fair bit lighter coming around 5 pounds versus the Barra’s 7.5 pounds.

Realism: The Umarex AER16 AEG full-auto BB Carbine is based on the AR platform in terms of its overall design without any specific licensing other than Umarex branding. It does have a lot of working parts including the charging handle which opens the dust cover showing the simulated bolt. There is no Hop-up like you would find in a similar Airsoft Rifle but with BB’s this is not so much of a requirement. You will also find a working magazine release for the all metal magazine along with a working selector for semi and full auto shooting. The all metal buffer tube allows for an AR style rear adjustable stock which I would assume you can swap out for just about any AR buffer tube based rear stock.

Pros:

  • No CO2 required so cost to shoot is less.

  • Comes with high volt LiPo battery and charger

  • Very consistent velocity as there is no cool down effect from CO2 cooling the gun (Just like an AEG Airsoft rifle).

  • Have the option to shoot in semi or full auto modes.

  • Lots of metal in construction (buffer tube, magazine, barrel, trigger, dust cover, charging handle, safety switch, magazine release sling mount.

  • Lots of rail option for mounting accessories.

  • Flip up removable sights with fully adjustable rear peep sight (single aperture).

  • 6 position adjustable rear stock.

  • Nice high capacity 55 round magazine, easy and fast to reload with speed loader.

  • Lots of working parts including the charging handle, dust cover, magazine release, selector switch.

  • Comes with safe storage bag for LiPo battery (no fear of burning your house down).

Cons:

  • No blowback operation as with some other Full Auto BB Rifles like the Crosman AR Series.

  • Receiver is plastic not metal.

  • When battery is installed you can not use all the shorter positions of the adjustable rear stock.

Comments:

The Umarex AER16 AEG full-auto BB Carbine is a nice addition from Umarex to what Barra came out with a year or so ago with their 400e AEG Rifle. I like that the AER16 is a true AR Replica which is a very popular design and it is a lot lighter than the kind of heft 7.5 pound Barra 400e which may be a bit much for some smaller or lighter shooters to handle. The Umarex AER16 AEG full-auto BB Carbine also has the advantage that it comes with an included 1.11V 1200mAH LiPo batter and USB Charger so no further purchasing is required to shoot it other than some BB’s which most Air gunners will normally have on hand. One last point to make is that the AER16 is the less expensive option over the Gen 2 Barra 400e that come in both metal and polymer version.

Categories: 4.5mm / .177 cal, AEG, BB, Comparison, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Umarex, AER16, AR15, M4 Carbine

KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol Table Top Review

No Comments

Type: Blowback CO2 Airsoft Pistol.
Manufacturer: Distributed by KJ Works.
Model: KP-18 TBC.
Materials: Metal & Polymer.
Weight: 1.7 pounds (770 grams).
Total Length: 7.9 inches (20cm)
Barrel: 4 inches (10.6cm) metal non-rifled.
Propulsion: CO2 x 1 (Gas mags available).
Action: Semi & full auto blowback, SAO trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 22 round drop out full size metal magazine.
FPS: Claimed 410 (with barrel extension).

Trigger Pull: The trigger on the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol behaves like a true Single Action Only unit, pleasantly light with a fairly short travel. There’s a bit of initial take-up, but you can clearly sense the crisp break near the rear where the release occurs, extremely light, consistent, and free of any noticeable slack. Remember you’ll need to rack the slide to chamber the first BB; after that the blowback mechanism handles all subsequent cycling.

Accuracy: I haven’t yet fired the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol or produced a Field Test Performance video for it. However, I’ve already completed a full field and shooting test for the very similar KJWorks KP-13, so I’d expect comparable on-target performance between the two. I’ll post a full field test and shooting video for the KP-18 TBC down the road, stay tuned.

Build Quality: KJWorks pistols are generally well made, and I expect the KP-18 TBC to follow that pattern. Based on my hands-on time with the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol and my first impressions of the KP-18, fit and finish look excellent. As with other models, you’ll find metal and polymer components positioned where they would be on a real modern semi-auto pistol, which contributes to the solid, authentic feel.

Realism: The KJWorks KP-18 TBC is a close visual replica of the real-steel Glock G18-style pistol, albeit without official licensing. Umarex holds the Glock license for many BB and Airsoft models, and the fact that a green-gas magazine from the Umarex Glock 17 full-blowback fits the KP-18 suggests KJWorks may be manufacturing some Glock-pattern airguns for Umarex. Glock has historically objected to unlicensed replicas in North America, so how this will play out remains unclear. For now, both licensed and unlicensed options exist for buyers.

Pros:

  • Metal and Polymer with decent weight and good feel to it.

  • Heavy Full blowback operation.

  • Excellent fit and finish as always with KJWorks pistols.

  • High capacity full size drop out magazine that holds the CO2 and 22 rounds.

  • Well hidden safety incorporated into the serial number under the barrel.

  • Working trigger safety.

  • White dot front sight and white outlined rear sight for easy target acquisition.

  • All working components like a real steel Glock styled pistol.

  • Comes with extended threaded outer barrel for adding a possible compensator or mock-suppressor.

  • Comes with barrel extension for higher velocity shooting (Possibly for easier import into Canada).

  • Would make a good training weapon if you are a real steel Glock owner.

  • Has a semi and full auto selector toggle located on the left rear of the slide.

  • Can use CO2 or gas magazines.

  • Field strip-able.

  • No orange tip.

Cons:

  • Sights are not adjustable.

  • Full auto will use CO2 like crazy but may be worth it.

  • Not a licensed version.

Comments:

If you’re a Glock enthusiast seeking a realistic training piece, you can shoot more affordably and in more places, there are more choices than ever. If official licensing matters, Umarex is the go-to option, although I haven’t seen a full-auto Glock from them yet. For those who prioritize a full-auto-style experience, the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol is as close to a real-steel Glock full-auto feel as you’re likely to find. I also appreciate the magazine interchangeability with some Umarex Glock mags if you already own a Glock 17 Airsoft pistol for instance. Whatever route you choose, it’s great to see more Glock-pattern airguns coming to market.

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, Full Auto, Gas, GBB, Pistol, Review, Semi Auto, Vimeo Video Tags: Glock 18, Glock 18 TBC, KJWorks, KP-18 TBC

Alias Gem Mini CO2 Pistol Field Test Shooting Video 50 Cal Rubber Ball

No Comments

In this part two video of our three part video series covering all the different ammo and barrel types that can be used with the Alias GEM Multi Ammo Mini CO2 Airgun, I test out the .50 caliber Paintball (Rubber Ball) barrel and ammo option to see what velocity and accrual I can get from the Alias Gem CO2 Airgun. If you have too already watch my Table Top Video and or my BB and Airsoft Field Test Shooting Video, then make sure to do so when you get a chance. Right off the bat I want to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not at all an Airgun you are going to want to buy in terms of raw performance as you will see in this video and my other Field Test Videos for it in this series. It is however a very unique Airgun you can shoot up close with and have some fun shooting whatever ammo you decide to go with on that given day.

Starting with velocity, I should have put a brand new CO2 in the Airgun as I end up finding out only getting three good shots out of my remain CO2, because of the super short barrel and rather inefficient use of the CO2, you only get around 12-15 full use shots out of the Alias GEM Multi Ammo Mini CO2 Airgun and that is with the larger 12 gram CO2! For that reason I only based my average velocity through my Chronograph on the first three shots I took, which were all pretty close in velocity. Here are the results: 200, 207, 203 with an average of 203 fps using fairly light weight .50 Caliber Rubber Balls. Again the super short barrel does not do this Airgun any favors in the power department.

Moving onto the accuracy portion of this test, well you really don’t need to watch this part as I was not able to hit my 8x11 target setup 30 feet away. Part of the problem is that there are no sights on the .50 Caliber Paintball Barrel and the other factor is that the Alias GEM Multi Ammo Mini CO2 Airgun kind of throws rounds all over the place no matter what ammo or barrel type you choose, so trying to figure out exactly where to aim is kind of hard and so I may have simply not been aiming in the best location on the target to get best results. In hind sight I probably should have just shot this Airgun a lot closer than I do when making my standard Field Test Shooting Videos, but this is my standard shooting location and so I stuck with it.

After I make my videos, I sometimes see things I did not notice when I was making them, and in this case I can see that the .50 caliber Paintball Rubber Rounds I was using did not always go as deep in the barrel as you need to front load them and kind of tap them and let gravity help ease them in. I should have perhaps used a pencil or something like it to push the Rubber Balls all the way in for more consistent performance in terms of velocity and accuracy. Well now we all know! You are not going to be using this Paintball Airgun for any kind of Paintball war games and so in my opinion I would go with the included 6mm Airsoft BB’s for shooting in areas where a 4.5mm metal BB may not be good idea. The 6mm Plastic Airsoft BB’s seemed to have the highest velocity averaging 383 fps with .25 gram Airsoft BB’s and I was able to get some of them on the paper target at 30 feet away.

Categories: .50 cal, CO2, Break Barrel, Field Test, Paintball, Pistol, Review, Single Shot, Vimeo Video Tags: Alias Airgun, GEM

Alias Gem Mini CO2 Pistol Field Test Shooting Video 4.5mm Steel BB and 6mm Airsoft

No Comments

This Field Test Shooting Video for the Alias GEM Multi Ammo Mini CO2 Airgun is part one of three videos where I will be testing out the included 4.5mm Steel BB Barrel and 6mm Airsoft Barrel options that come with it in the box. I also have the .50 Caliber Paintball and rocket Barrels that I will be testing in Field test Videos two and three consecutive to this video. Normally I first test velocity and then I test accuracy, but in this three part video series I test velocity and accuracy at the same time being that the Alias GEM Multi Ammo Mini CO2 Airgun is a single shot pistol. I get the same end testing results as I would normally get, but I do only shoot 5 rounds at the target, spoiler alert the Alias GEM Multi Ammo Mini CO2 Airgun is not all that accurate, so I am not sure if adding another 5 more shots would have shown us a different result.

In terms of velocity, keep in mind the barrel is super short on the Alias GEM Multi Ammo Mini CO2 Airgun at just over 3 inches when using the 4.5mm Steel BB, the 6mm Airsoft, and the .50 caliber Paintball Barrels. That said with 4.5mm Steel BB’s I did average 263 fps and with 6mm .25 gram Plastic Airsoft BB’s, I averaged 383 fps which was actually pretty good. The temperature was mid warm so pretty close to room temperature when I performed my test.

Accuracy was not nearly as good as I was hoping for, I was not expecting stellar results and I would say I got even less than stellar results only getting 3 of the 4.5mm Steel BB’s on the paper target and only 2 of the 6mm Airsoft BB’s on the target. I did struggle with exactly where I needed to aim the Alias GEM Multi Ammo Mini CO2 Airgun as BB’s were so inconsistent. Perhaps if I was able to figure out the ideal aim point, I would have had more BB’s land on the target. Even the sights are hard to use with such a small Airgun having a super short barrel. If you are hoping the .50 caliber Paintball rounds and Rockets (Bolts) do better, don’t count on it…

All in all Alias GEM Multi Ammo Mini CO2 Airgun is a super cool and unique Airgun that has a lot of options when it comes to ammo choice. I would not recommend using it at anywhere close to 30 feet away as I did in this test, this is how my Airgun range is setup. It would be a lot better at 20 feet or even 10 feet since it is not a lot of fun if when you shoot at something, you don’t really ever hit it ;) Stay posted for my upcoming Field Test Shooting Videos for the .50 Caliber Paintballs and the Rockets (Bolts). I have also made a Table Top video you can check out if you are interested in more of the details and specifications along with some nice close up video of the Alias GEM Multi Ammo Mini CO2 Airgun.

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, CO2, Break Barrel, Field Test, Pistol, Review, Single Shot, Vimeo Video Tags: Alias Airguns, GEM

Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver Table Top Review

No Comments

Type: Revolver CO2 Airsoft Pistol.
Manufacturer: Distributed by Umarex.
Model: Smith & Wesson 629 Competitor.
Materials: Mostly all Metal.
Weight: 3.3 pounds (1.55 kg).
Total Length: 12 inches (30.5cm)
Barrel: 6 inches (15cm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Revolver, SA & DA trigger.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: 6 round cylinder.
Velocity: Claimed 500fps.

Trigger Pull: The Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver shoots in either single action or double action. If you pull the hammer back, you can shoot in single action which will give you a super short trigger pull with virtually no takeup and a very light and predictable release, perfect for when you are wanting the best possible accuracy out of this Airsoft Revolver. You can also simply just pull the trigger in double action which means your trigger finger is doing all the work of pulling back the hammer and releasing it which is a much longer trigger pull that is between medium and heavy pull, but still fine for quicker action shooting.

Accuracy: So far I have not shot the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver but I have shot a lot of similar shell loading 6 shooter revolvers. Yes the cylinder and the actual shells are a bit larger but this should not really affect accuracy or power. Umarex does claim a max velocity of 500 fps which does seem high, so it will be interesting to see if the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver will actually hit these numbers. In my past Field Test Shooting Video Reviews I am generally able to get at least a 2 inch 6 shot groupings from 30 feet away from my paper target so hopefully that is the case with the S&W 629 Competitor.

Build Quality: If you’re looking for a very solid and hefty Airsoft revolver, than I don’t think there is anything more beefy than the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver. It is a whopping 3.3 pounds and is almost all metal so smaller handed shooters may find this one a bit too much to hold comfortably. Fit and finish is very good and I do really like the satin stainless steel look to it even though Umarex calls it a chrome finish.

Realism: I like the shell loading revolvers for the added realism you get manually loading the cylinder with 6 preloaded shells. In almost all of the shell loading 6 shooter revolvers, the cylinder and shells are actually smaller than what you would find in a real steel 6 shooter revolver, especially the Single Action Army Revolvers as they would normally shoot a .45 caliber shell rather than a .38 caliber shells. So it is nice that Umarex didn’t just go with already to go parts and they gave the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver newly designed larger shells and a larger cylinder, maybe the shells are not actually .44 caliber in size but the larger cylinder and larger shells does give it more realism. Of course almost all the parts function just like they would in a real steel revolver.

Pros:

  • Almost all Metal build with a very heavy weight of 3.3 pounds.

  • Full adjustable rear sight for windage and elevation.

  • Comes with 12 reloadable shells, most only come with 6 shells.

  • Grooved Pistol Grips for added comfort and grip.

  • Picatinny rail on top of barrel for adding a red dot or optional sight.

  • Nice Smith & Wesson markings on gun stamped into the frame.

  • Option of shooting in single or double action, nice light single action trigger.

  • I like the satin stainless finish.

  • Super realistic loading and shooting with the removable shells.

Cons:

  • Does come with an orange tip.

  • No adjustable hop-up I can see.

  • Rather large and heavy so not great for younger or smaller handed shooters.

  • Velocity may be a bit hot for some Airsoft games.

Comments:

I think my main takeaway for the Umarex Smith & Wesson 629 Competitor CO2 Airsoft Revolver is that Umarex has a new larger shell and cylinder design, which is closer to the actual shell and cylinder size of a .44 magnum, so maybe we will see this design coming out in future shell loading revolvers. Other noticeable features are for sure the size and weight of this beast. If you add a red dot or optical sight to it, then this Airsoft revolver could weigh in at nearly 4 pounds! If you want the ultimate shell loading revolver than this is probably going to be the choice to go with, unless you want it in 4.5mm steel BB or Pellet versions as at least for right now, it is only available in an Airsoft version, maybe that will change down the road…

Categories: 6mm, Airsoft, CO2, Comparison, Pistol, Review, Revolver, Vimeo Video Tags: Umarex, Smith & Wesson, Smith & Wesson 629

SHOT Show Las Vegas 2025 Replica Airguns Umarex Interview

No Comments

I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.

Categories: 4.5mm / .177 cal, 6mm, AEG, Airgun News, Airsoft, Airsoft News, BB, Blowback, Break Barrel, CO2, Full Auto, GBB, Pellet, Pistol, Rifle, Semi Auto, Scope, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, SHOT Show 2025, SHOT Show

SHOT Show Las Vegas 2025 Replica Airguns Teaser

No Comments

I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!

I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…

Categories: AEG, Airgun News, Airsoft, Airsoft News, Arrow, BB, Blowback, Bulk Air, CO2, Break Barrel, Crossbow, Full Auto, Gas, GBB, Multi-pump, Paintball, PCP, Pellet, Pistol, Pump, Repeater, Replica Airguns News, Revolver, Rifle, Scope, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: SHOT Show, SHOT Show 2025, Umarex, ASG, Crosman, Daisy, KWA, Steambow, Barra

Alias GEM Multi Ammo Mini CO2 Airgun Table Top Review

No Comments

Type: Multi-Ammo Pistol.
Distributer: Alies Airguns.
Model: GEM.
Materials: Mostly metal with some plastic build.
Weight: Barrel dependent.
Total Length: Barrel dependent 3.5 inches (89mm) with BB and Airsoft Barrels.
Barrel: Barrel dependent 2 inches (51mm) with BB and Airsoft Barrels
Propulsion: 8 or 12 gram CO2 (12 Gram CO2 required adaptor sold separately).
Action: Break Barrel / Single shot.
Ammunition Type: 4.5mm Steel BB's / 6mm Airsoft BB’s (Can also purchase .117 Pellet, .50 & .43 cal Paintball, 9mm Arrow Barrels)
Ammunition Capacity: 1 round.
FPS: up to 400 using 4.5mm Steel BB’s.

Trigger Pull: The Alias GEM Multi Ammo Mini CO2 Airgun is a true single action only pistol that requires the pulling back of the hammer for each shot. This does give it a very nice trigger action that is short to medium in length with an easy release. The makeup is about medium for a single action trigger with a bit of an unpredictable release as there is no point in time that you feel it breaking on you. This can be good or bad depending on how you like your triggers as it is hard to tel when ti will actually release but the smoothness makes it a good trigger overall in my opinion

Accuracy: I have not shot the Alias GEM Multi Ammo Mini CO2 Airgun at all so far as it requires 8 gram CO2 and so I am waiting on the 12 gram adaptor for it before I can even give it a quick try. I will be making a full Field test Review for it swapping between a bunch of barrel options to see how each barrel adn ammo type performs in terms of power adn accuracy so stay posted for that video down the road a bit.

Build Quality: Build quality for the Alias GEM Multi Ammo Mini CO2 Airgun is very good with an almost all metal build other than the front and back sights, the trigger, the safety adn the barrel release. I kind of wish these parts were also metal as the rest of the Airgun is so pristine! The weight of this pistol feels very dense as it is so small yet has a good weight. The fir and finishes is all very good with the chrome finish on most parts and even the inclusion of what I believe are real gem stones on each side of the grips. The mechanical parts are also smooth and precise.

Realism: As far as I know the Alias GEM Multi Ammo Mini CO2 Airgun is not a replica of any production real steel gun that I am aware of. It looks to me like some sort of futuristic compact laser pistol? In terms of gun shape and what we are use to in terms of what a gun is it checks most of the boxes but it is it’s own design for sure.

Pros:

  • Super compact design, probably the smallest Airgun available.

  • Multiple quick change barrel and ammo options.

  • Mostly all metal build, very high quality materials.

  • Nice smooth and light SAO trigger.

  • Able to also use 12 gram CO2 with optional adapter.

  • Comes in different colors (red or black).

  • Decent velocity up to 400 fps depending on ammo type.

  • Eye-catching chrome and gemstone detailing make it a collector's piece.

Cons:

  • Uses 8 grams CO2 standard, harder to get and more expensive.

  • Only a single shot, not an action shooter.

  • On the pricy side at over $300 Canadian.

Comments:

I have to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not going to be for everyone as the price point is up there a bit for such a simple single action gun. That said it is super unique and the quality adn design is top notch. It may in fact be the smallest CO2 Airgun on the market adn you can literally put it in your front pocket easily. That combined with all the barrel and ammo options makes it super flexible if you plan on shooting a variety of different ammo types. Like I said in the video you may even be able to get away with buying it as a gift for your wife or girlfriend since it technically can be defined as being jewelry with the imbedded Gem stones in the grips. That may be a bit of a stretch unless she is also an Airgun fan.


Categories: .50 cal, .43 cal, 9mm, 6mm, 4.5mm / .177 cal, Airsoft, Arrow, BB, Break Barrel, CO2, Paintball, Pellet, Pistol, Review, Single Shot, Vimeo Video Tags: Alias Airguns, GEM

Umarex P2P HDP 50 Compact CO2 Rubber and Powder Ball Less Lethal Pistol Table Top Review

No Comments

Type: Less Lethal Pistol.
Manufacturer: Umarex - T4E.
Model: P2P HDP 50 Compact.
Materials: Metal & Polymer.
Weight: 1.3 pounds (585 grams).
Barrel: 4 inches (108mm) Smooth bore.
Total Length: 7.2 inches (183mm).
Power Source: 1x8 gram CO2.
Action: Semi auto - Double action only trigger.
Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball.
Ammo Capacity: 4 Round spring fed internal magazine.
FPS: 365 (11 Joules).

Trigger Pull: The trigger pull on Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so each round feels about the same with spring tension not playing much of a factor. In order to use the trigger, the Pistol will need to be fully charged by loading an 8 gram CO2 and giving it a smack on the bottom of the pistol grip of the CO2 screw. This will pierce the 8 gram CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the pressure indicator will retract and the trigger will not function and a new CO2 will be required for more shooting.

Accuracy: So far I have not tried out the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol in the Replica Airguns Indoor Airgun Shooting Range, I have shot its big brother the Umarex P2P HDP 50 Gen 2 and it did shoot around a 6 inch 6 shot grouping for me with a velocity of around 450 fps that worked out to around a 15 joule energy rating. I do not expect the same from the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol as it is claimed with a lower velocity of 365 and an energy rating of 11 joules. It should get pretty close to this based on it’s bigger brother’s performance.

Build Quality: The build quality of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is very good overall. It is mostly made out of plastic which is fine, since it is designed to be a compact and portable pistol which should be on the lighter side. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. I wish the trigger guard that swings down to load the ammo clicked back into place better as it seems easy for it to open up and potentially get caught on clothing or objects while using it.

Realism: This version of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol comes with the orange slide area to show that it is not a lethal firearm. It may also come in an all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. Making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the legal system. That said the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol does look kinda like a modern or futuristic semi auto pistol and functions much the same but with a lot less force.

Pros:

  • Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe a decent amount power to hopefully deter an intruder.

  • It is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.

  • Decent power of claimed 365 fps with a 11 Joules energy rating.

  • Can store the 8 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.

  • Holds 4 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 8 shots per 8 gram CO2.

  • Black post front and orange notch rear sights have enough contrast to make sighting on most targets stand out.

  • Double action trigger feels smooth and not too heavy, also has a trigger safety on it.

  • Comes with 10 rubber and 10 powder balls along with three 8 gram CO2 to get you started.

  • Compact size is nice if you want to cary it with you, (law permitting).

Cons:

  • Uses 8 gram CO2 which are harder to get and more expensive than 12 gram CO2, will also get less shots per CO2 and quicker cool down.

  • No Picatinny rail or adjustable sights.

  • Only holds 4 rounds.

  • In Canada it does not seem you can get pepper balls easily most likely due to import regulations.

Comments:

I really liked the big full size brother of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol and it did turn out to not only be fairly accurate but also performed well in the power category, coming in even a bit higher than the claimed 13 joules of energy with a real world rating for me of 15 joules using standard .50 caliber rubber balls. So I am hoping the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol with its 365 fps rating and 11 claimed joules will at least hit the mark. Yes it is a bit less powerful but it is also a lot smaller and more compact if you where interest in conceal caring it. Again law permitting in your area! Stay posted for my Field Test Shooting Video where I will find out if the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol performs as expected.

Categories: .50 cal, CO2, Comparison, Paintball, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, T4E HDP 50 Compact, T4E PDP

Umarex P2P HDP 50 Gen 2 CO2 Rubber and Powder Ball Less Lethal Pistol Table Top Review

1 Comment

Type: Less Lethal Pistol.
Manufacturer: Umarex - T4E.
Model: P2P HDP 50.
Materials: Metal & Polymer.
Weight: 1.5 pounds (.7 kg).
Barrel: 4 inches (10.2 cm) Smooth bore.
Total Length: 8.5 inches (21.6 cm).
Power Source: 1x12 gram CO2.
Action: Semi auto - Double action only trigger.
Ammo Type: .50 Caliber Rubber Ball, Pepper Ball, Powder Ball.
Ammo Capacity: 6 Round spring fed internal magazine.
FPS: 485 (13 Joules).

Trigger Pull: The trigger pull on Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is double action only but not overly long or heavy. There does not seem to be any ammo friction which is nice, so the each round feels about the same with spring tension not playing a factor. In order to use the trigger, the Pistol will need to be fully charged by loading a 12 gram CO2 and giving it a smack on the bottom of the pistol grip. This will pierce the CO2, charging the gun with pressure and activation the trigger mechanism. When the CO2 pressure becomes too low, the trigger will not function and a fresh CO2 will needed to be swapped over.

Accuracy: So far I have only briefly tried out the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol here in the Replica Airguns Indoor Airgun Shooting Range, and I was rather impressed at the initial performance as it did seem to be moving the .50 call rubber balls I was shooting at close to 500 fps with a lot of energy as my pepper and cardboard target was dislodged from the backstop after a few shots. Accuracy seems to be as expected from a Paintball type pistol, so I am expecting to get around a 4-6 inch 6 shot grouping at 30 feet away which will be effective in a Less Lethal encounter.

Build Quality: The build quality of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is good overall. It is mostly made out of plastic which is fine, as I feel that if it was mostly metal, and because of its larger size, it would be on the heavy side and not something you may want to use in a cary situation if that was your plan. There is metal where it needs to be in most of the mechanical areas including the barrel, trigger, charging system and I am sure other internal parts. The plastic parts feel well made and fit and finish is very good. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol does have more than enough weight at 1.5 pounds to feel solid in the hand.

Realism: This version of the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol comes with the orange slide to show that it is not a lethal firearm. I have seen all black version but at this time we only sell the colored slide version. This does make it obvious that the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is not a “Real Firearm” designed for lethal encounters, which in Canada is a good thing since our self protection laws seem to favor the criminal more than the victim. So making sure you are using a tool designed to deter a criminal rather than harm or kill them, is hopefully going to keep you out of trouble with the law. That said the Umarex P2P HDR 50 Gen 2 CO2 Less Lethal Pistol does look like a modern semi auto pistol and functions much the same but with less force.

Pros:

  • Not many options for a true less-lethal option here in Canada. This Airgun is purpose built for less lethal use so it has what I believe is enough power to actually dissuade most intruders.

  • In this case I like that it is clearly marked in orange to indicate it is not an actual lethal firearm. When protecting yourself in Canada you have to be cautious with your intentions, and having clear orange markings will help in your case to show that you where not trying to give the impression of using a real firearm.

  • Nice powerful 485fps with a 13 Joules energy rating.

  • Can store the 12 gram CO2 in it and activate with a quick hit to the bottom of the CO2 screw.

  • Holds 6 rounds in the internal magazine which hopefully gets the job done. Should be able to reload at least one more time for a total of 12 shots per 12 gram CO2.

  • Fiber Optic sights make it easy to line up your target in most lighting conditions and backgrounds.

  • Double action trigger feels smooth and not too heavy or long, also has a trigger safety on it.

  • Can add a tactical light or laser to the under barrel picatinny rail.

  • Comes with 10 rubber and 10 powder balls to get you started.

Cons:

  • It is a bit on the larger size, not going to be easy to cary if that is your plan. I do not know what the legal ramifications of carrying this would be as it is clearly designed for protection and not for lethal encounters.

  • Not a lot of shots per CO2 but the idea here is to quickly deliver as much damage as possible, this is not a weapon for prolonged gun fights.

  • In Canada it does not seem you can get pepper balls easily most likely due to import regulations.

Comments:

The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is a very refreshing product for us here in Canada as up until now similar styled Rubber Ball purpose built self defense products we have been able to get, in my opinion simply did not have enough power to really be effective other than the initial intimidation of holding what looks like a firearm. If it came down to actually shooting it, I don’t believe there would be enough stopping power to deter an intruder. The Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol on the other hand has a 485 fps, 13 Joules power rating which is a rather big jump from other similar products available to us here in Canada and although it may not stop everyone, I do believe you have a much better chance protecting yourself with the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol. If you are looking for something to have at home to help you feel a bit safer, then the Umarex P2P HDP 50 Gen 2 CO2 Less Lethal Pistol is the absolute best option for Canadians at this time.

Categories: .50 cal, CO2, Comparison, Paintball, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, T4E, HDR 50, Less Lethal

Umarex Markpoint Break Barrel .177 Cal Pellet Pistol Field Test Review

No Comments

In this Field Test Shooting Video conducted in the Replica Airguns Sea Can indoor Shooting Range, I test the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol’s power in velocity using my Chronograph along with the accuracy shooting at a Paper Target setup 30 feet away. If you are also interested in details, specifications and more close up video of the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, then make sure to watch my Table Top Video I already made for it here…

When I placed 6 pellets from the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol through my Chronograph, I removed the fastest and slowest recorded shots, and got an average of 290 fps, there was a fairly big range in fps as some dieseling may have been occurring, since this Pellet Pistol had not been shot before and there may have been some oils in the barrel. Here are my recored velocities for all 6 shots: 213, 286, 308, 270, 304, 298. I was using lead flathead pellets that weighed 8.2 grain each. So you will for sure get much higher velocities using 5 grain alloy pellets, probably very close to the 400 claimed fps.

Moving on to my accuracy test, the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol did pretty good. I was not sure how it would shoot for me as the trigger is pretty firm, which can cause the shooter to pull a shot or two. I was able to keep my shots pretty consistent with perhaps one shot getting a bit away from me. That said, out of the 10 shots I placed on the paper target setup 30 feet down range, I managed to get 9 of them all within about 2 inches of each other with the larger spread being elevation, windage was within about 3/4 of an inch, so consistent velocity may have played a roll here. I did use a semi rested shooting position with my hands resting on a sand bag up front, and sitting on a stool in the back to help stabile me as much as possible. I was happy that out of the box the aim point was pretty well centered just a bit to the right if anything.

All in all the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol performed as much as I could have expected for a $50 Canadian low cost pellet shooter. I really wish an add on sight of some sort was possible, as there does not seem to be anyway of adjusting the sights on the Umarex Markpoint Break Barrel .177 Cal Pellet Pistol, so hopefully yours shoots well centered for you also. I do not recommend this Air Pistol for people with smaller hands as it is a bulky Airgun with very wide and large grips. The trigger also does take a bit of finger strength so not a gun for younger shooters perhaps. For the price it is a very unique Pellet Pistol with a very modern and futuristic look to it which may or may not appeal to everyone.

Categories: 4.5mm / .177 cal, Field Test, Pellet, Pistol, Review, Single Shot, Spring Piston, Vimeo Video, Break Barrel Tags: Umarex, Markpoint