View fullsize

Welcome back for another field test! Today I am taking the Daisy Woodland Trail Western Carbine 1999 out to the range to see what it can do. If you want a deep dive into the specifications, materials, and a close-up look at the hardware, make sure to watch our dedicated Table Top Review. For this video, however, I am focusing entirely on how this lever-action BB rifle performs when putting steel to paper.

Velocity and Chronograph Performance

To get a baseline for power and consistency, I ran a string of shots through the chronograph. The manufacturer claims velocities in the 300+ FPS range. Here is how the Daisy handled right out of the box:

• Shot 1: 291 FPS

• Shot 2: 286 FPS

• Shot 3: 285 FPS

• Shot 4: 284 FPS

• Shot 5: 283 FPS

The consistency on this carbine is outstanding. After a slightly higher first shot, it locked right into the high 280s and low 290s and stayed remarkably steady throughout the test string with an average fps of 286.

One quirk to watch out for during operation is the loading system. While cocking the lever, you might occasionally get a "dud" or mis-feed where a BB fails to chamber properly. If this happens, you simply need to (while pointing the barrel up) give the Daisy Woodland Trail Western Carbine 1999 a quick shake to position the ammo and rack the lever again.

View fullsize

Downrange Accuracy at 30 Feet

Moving on to the accuracy portion of the review, I set up a fresh paper target exactly 30 feet downrange.

• Target Testing: I fired 10 carefully aimed shots. The gun delivered an excellent grouping of about 1.5 inches. The cluster was perfectly centered left-to-right, meaning the windage was completely dialed in straight out of the box which is great since there are no windage adjustments to speak of. It did shoot slightly high on the elevation, but compensating for this is simply a matter of aiming just underneath the bullseye or tweaking your optics if you mounted a red dot or optical sight.

View fullsize

Handling Notes and Optics Fitment

This is an incredibly fun lever-action plinker. One of the best design choices on this specific Daisy Woodland Trail Western Carbine 1999 model is the modernized, bigger loop on the lever, which makes it much more comfortable for shooters with larger hands to cycle the action or if wearing gloves.

You will also find a major upgrade on the top of the receiver. This version features a Picatinny rail, making it extremely easy to mount optics. I actually used the built in open sights rather than installing a red dot sight during this specific accuracy test, and the iron open sights worked very well for me. If you prefer iron sights, the rear sight remains fully adjustable for elevation but not windage.

Final Thoughts

The Daisy Woodland Trail Western Carbine 1999 is a rugged, highly affordable BB gun that backs up its classic lever-action fun with rock-solid consistency and great accuracy on the range. It is incredibly cheap to shoot, making it the perfect backyard plinker for knocking over pop cans or army men. Just remember to always wear your eye protection!

Where to Buy

• Buy the Daisy Woodland Trail Western Carbine 1999 in Canada

• Buy BB Rifles in the US

If you haven't already, please head over to our YouTube, Rumble, and Vimeo channels and hit that subscribe button. We are always working to build our video community back up, and we truly appreciate your support!

View fullsize

In this table top review, we are taking a close look at the Daisy Model 1999 Lever Action Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This rifle fits into the long, classic lineage of lever-action BB guns, modeled after traditional Western lever-action carbines like the legendary Daisy Red Ryder. While it shares that iconic spring-piston platform, the Daisy Model 1999 brings a modern aesthetic update with all-weather synthetic furniture, high-visibility fiber optics, and a built-in optics rail.

Key Specifications

• Model: Daisy Model 1999

• Type: Lever Action Spring-Piston BB Rifle

• Caliber: 4.5mm (.177 cal) Steel BBs

• Power Source: Spring-Piston (No CO2 Required)

• Velocity: Approx. 350 FPS

• Magazine Capacity: 650-Round Internal Reservoir (Gravity Fed)

• Action: Single-Shot Lever Action

• Safety: Cross-Bolt Safety

• Barrel: Smoothbore Steel Barrel (inside outer metal barrel shroud)

• Stock & Forearm: All-Weather Molded Synthetic / Composite Polymer (Green)

• Construction: Metal Outer Barrel & Receiver with Polymer Stock, Forearm, & Lever

• Weight: Approx. 2.2 lbs

• Overall Length: 35.4 inches

• Sights: High-visibility fiber optic front sight; elevation-adjustable rear sight

• Optics Rail: Built-in Picatinny rail mount

View fullsize

First Impressions & Build Quality

The Daisy Woodland Trail Model 1999 puts a contemporary spin on the traditional lever-action look, sporting an all-weather green molded synthetic stock and forearm paired with an orange trigger and barrel band accent.

Weighing in at just 2.2 pounds with an overall length of 35.4 inches, it is exceptionally lightweight and compact, making it an ideal entry-level platform for younger shooters and beginners.

The rifle incorporates a solid amount of metal along the outer barrel and receiver casing. While it does use polymer for the stock, forearm, and cocking lever, the build feels sturdy and low-maintenance.

View fullsize

How It Works

The Woodland Trail Model 1999 utilizes the proven spring-piston lever-action mechanism:

• No CO2 or Gas Required: Every shot is cocked and powered manually via the spring-piston system.

• Large Loop Lever: Cocking is smooth and easy thanks to the oversized loop lever.

• Massive Ammo Capacity: It holds up to 650 steel BBs in a top-loading internal reservoir.

• Gravity Fed: Tilting the rifle cocks and drops a BB into the loading mechanism, visible through a small viewport near the breach so you can confirm a round is chambered before firing.

Sights & Optics

Unlike traditional bare-iron lever guns, the Daisy Model 1999 comes equipped with several optical upgrades:

• Fiber Optic Front Sight: The bright front fiber optic sight makes target acquisition quick and clear against varying backgrounds.

• Adjustable Rear Sight: Step-adjustable for elevation (fixed for windage).

• Built-in Picatinny Rail: A dedicated top rail allows for easy mounting of compact red dot sights or low-power optics without needing custom brackets or adapters.

Pros & Cons

Pros:

• Extremely lightweight (2.2 lbs) and compact—perfect for youth and beginners.

• Durable, all-weather synthetic stock is moisture-resistant and low maintenance.

• Built-in Picatinny rail makes adding red dots or scopes simple.

• Bright fiber optic front sight aids quick target acquisition.

• Smooth, easy-cocking lever action with a large loop handle.

• Huge 650-round gravity-fed BB reservoir means less reloading downtime.

• 350 FPS velocity is safe and well-suited for supervised backyard plinking.

• No CO2 or gas cartridges required.

• Highly affordable entry-level price point.

Cons:

• Synthetic plastic cocking lever (a metal lever would feel more robust).

• Lower velocity compared to modern CO2-powered airguns.

• Rear sight adjusts for elevation only (no windage adjustment).

• BB ammo only and smoothbore barrel limits pinpoint precision to short plinking ranges.

• Basic spring action lacks the ultra-realistic shell-ejecting mechanics of higher-end replicas.

View fullsize

Final Thoughts

The Daisy Woodland Trail Model 1999 is a reliable, fun, and accessible take on the classic lever-action spring BB rifle. By blending traditional lever-action shooting with modern polymer furniture, a fiber optic front sight, and a Picatinny optics rail, it offers fantastic value for casual plinking and teaching basic marksmanship while offering some customization.

Stay tuned for our upcoming Field Test Shooting Review, where we’ll put this rifle through its paces on the chronograph and see what kind of target accuracy it delivers!

Available at:

• 🇨🇦 Buy the Daisy Woodland Trail Model 1999 in the Canada Store

• 🇺🇸 Buy BB Rifles in the US Replica Airguns Store

Also check out ReplicaAirguns.com for more written articles, detailed photos, and reviews.

View fullsize

First Look & Overview In this table top review, we are taking a look at the Marksman Spring BB / Pellet / Dart Pistol, an inexpensive and versatile option for backyard and basement plinking. This model is primarily constructed with a plastic exterior shell, housing a single-stroke spring-piston power plant. Coming in at around $50 CAD, this is not a high-end replica, but it offers a highly accessible shooting experience with the ability to handle multiple types of ammunition.

View fullsize

Specifications

• Caliber: 4.5mm Steel BBs, .177 Caliber Pellets, & Darts

• Action: Single-stroke spring piston, break-barrel style loading

• Magazine: 18-round BB reservoir (single-shot for pellets and darts)

• Power Source: Spring piston

• FPS: Maximum 200 FPS

• Weight: ~1 lb (454 grams)

• Overall Length: 9 inches

• Construction: Mostly plastic exterior with internal metal components

• Sights: Fixed fiber optic sights (front and rear)

• Safety: Cross-bolt safety

View fullsize

Build Quality & Design The Marksman Spring BB / Pellet / Dart Pistol features a lightweight, predominantly plastic external construction. While it lacks the substantial heft of full-metal replicas, weighing in at just 1 pound, it feels quite comfortable in the hand. The grip has a nice texture and isn't overly thick, making it suitable for shooters with smaller hands even though the pistol maintains a slightly bulky, blocky 1911-style appearance. Despite the external plastic shell, the internal spring piston system and critical mechanical components are made of metal.

View fullsize

Magazine & Loading System Loading this pistol is a unique process. It features a built-in 18-shot internal reservoir for 4.5mm steel BBs. To fire, the rear section of the slide is pulled back to activate the spring piston. Pushing the top portion forward opens the breech in a break-barrel fashion, allowing access to the loading bay. When using BBs, they drop in from the internal reservoir. If you are shooting pellets or darts, you will load them one at a time directly into the breech. An included rubber speed-loader accessory lets you easily drop BBs into the reservoir by simply pinching it, a convenient feature that saves loading time.

Handling & Controls Operating this spring piston pistol requires manual cocking before every shot. The slide is used to cock the internal spring, and the trigger features a skeletonized design within a built-in fairly heavy trigger guard. The trigger pull is decent but requires a deliberate press. The cross-bolt safety effectively locks the trigger, ensuring that the pistol cannot be fired once cocked and loaded until you have disengaged it. (Mine did have an issue)

View fullsize

Sights & Optics The Marksman Spring BB / Pellet / Dart Pistol comes equipped with fixed fiber optic sights on both the front and the rear. This makes target acquisition noticeably easier, especially against various backgrounds or in lower light conditions. The sights are fixed and non-adjustable, and the pistol even though it looks like it does, it does not include accessory rails for mounting aftermarket optics or lasers.

Performance Expectations This airgun is not built for shattering power records, boasting a maximum velocity of around 200 FPS. Because of its low power output, it is very quiet to operate, making it ideal for close-range indoor plinking or backyard target shooting where noise is a concern. The spring piston action means there is no CO2 to buy, keeping your operating costs extremely low.

Pros

• Very affordable (around $50 CAD)

• No CO2 required; low ongoing operating cost

• Versatile ammo compatibility (shoots BBs, pellets, and darts)

• 18-round internal BB reservoir

• Included quick-load pinch accessory for BBs

• Fiber optic sights front and rear

• Lightweight and easy to handle for various hand sizes

• Quiet operation ideal for indoor or backyard shooting

Cons

• Low velocity (max 200 FPS)

• Predominantly plastic exterior construction

• Requires manual cocking for every single shot

• Fixed, non-adjustable sights

• No accessory rails

View fullsize

Final Thoughts The Marksman Spring BB / Pellet / Dart Pistol isn't about raw power or ultra-realistic blowback action. It's an accessible, budget-friendly airgun that doesn't require extra CO2 purchases. With the ability to shoot multiple types of ammo and a convenient included BB loader, it delivers straightforward, simple fun. Stay tuned for the upcoming field test shooting video to see exactly how this performs down range.

Be sure to check out our exclusive long-form video content on YouTube, Vimeo and Rumble and connect with us on Facebook, Twitter and Instagram.

• Buy the Marksman 1018 Spring BB - Pellet Pistol in Canada

• Buy Airguns in the US

View fullsize

Today we are staying dry inside out of the rain and stepping into the indoor range for a practical field test and penetration review of the Umarex T4E TP50 Less Lethal Pistol. If you are looking for a legal and unregulated deterrent for home defense that packs a surprising punch, you’ll want to see how this .50 caliber paintball-style pistol performs straight out of the box.

The Test Setup

For this test, we are keeping the TP50 entirely stock. There are no valve modifications or aftermarket upgrades here, this is exactly what you get when you open the box.

We are shooting from a distance of approximately 30 feet. Here are the specs on the ammunition and power for today's test:

• Ammunition: .50 caliber rubber balls with a steel core. These are slightly less dense than nylon but heavier than standard rubber due to the steel center. (Just under 3 grams)

• Power Output: Pushing roughly 12 to 13 Joules.

• Velocity: Traveling at just over 300 feet per second (fps).

Our targets for today include a solid piece of 3-ply wood, a metal trash can lid and some thick plastic bucket lids to see exactly what kind of damage this less-lethal option can do.

View fullsize

Target 1: The 3-Ply Wood Test

First up was the 3-ply wood. Given the velocity and the dense nature of the target, I wasn't expecting the Umarex T4E TP50 Less Lethal Pistol to blow right through the wood.

After putting a couple of rounds downrange, the results were impressive. While it didn't fully penetrate the 3-ply, it hit with a resounding smack and left significant, visible damage on the surface. Honestly, this gun shoots much hotter than I remembered. It is absolutely no slouch.

Target 2: The Galvanized Steel Garbage Can Lid

second up, I aimed at the galvanized steel garbage can lid. Going into this stage, I expected the .50 caliber round to simply smack the surface and fall straight to the ground without penetrating, which is exactly what happened.

However, even though it didn't punch a hole through the metal, the sheer force of the impact was undeniable. The round hit the steel hard, proving that even against dense, unforgiving surfaces, the TP50 is pumping out some serious kinetic energy.

Target 3: The Plastic Barrel Lids

Next, we moved on to the plastic barrel lids. I expected the TP50 to punch through a single lid, so we taped two of them together to see how far it could push.

This is where the Umarex T4E TP50 Less Lethal Pistol really showed its teeth. When I fired, the recoil actually threw my hand back, this gun has genuine kick to it, especially when firing these heavier steel-core rounds.

It does seem to shoot a bit on the high side at 30 feet, so I ended up hitting the target near the top edge. Even so, the steel-core rubber ball blew cleanly through the first plastic lid and struck the second. That level of penetration from a stock, 12-Joule less-lethal pistol is incredibly impressive.

Final Thoughts

The Umarex T4E TP50 is a powerhouse for an out-of-the-box, unregulated less-lethal pistol. While it's designed as a deterrent rather than a lethal option, the 12 to 13 Joules of energy paired with steel-core rubber balls provides more than enough kick to send a very clear message to anyone who shouldn't be up to no good and on your property.

If you are looking for a highly capable less-lethal pistol that sits well within Canada's unregulated legal limits, the TP50 delivers.

If you are interested in picking one up for yourself, or you want to check out our other less-lethal options, head over to replicaairguns.ca in Canada or replicaairguns.us in the US.

• Buy the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol in Canada

• Buy Paintball Guns in the US

View fullsize

The Steambow B08 .68 Caliber Tactical Crossbow offers a unique and entertaining option for target shooting. In this field test review, I tested the Steambow B08, a .68 caliber launcher that is designed to shoot paintballs, rubber balls, or foam balls. I wanted to test this 35-pound bow to see how it performs in terms of velocity and real-world accuracy at 30 feet downrange.

For ammunition, I tested two different types of projectiles: black rubber balls and soft yellow foam balls. These projectiles are very light, which means firing them feels almost like you are dry-firing the bow all the time. However, using them makes for a cheap way to have some fun plinking around, and you can easily collect and reuse the ammo.

Velocity testing through the chronograph produced some incredibly consistent, albeit unusual, numbers. I fired six shots in total, using three rubber balls followed by three foam balls. The Steambow B08 delivered readings of exactly 129 FPS for all six shots. Seeing six duplicate velocity readings in a row across two different types of ammo is something I don't think I've ever seen before! This suggests that the projectile weight is less important here, as the bow string only moves so fast. For those looking to get more energy downrange, you will definitely want to use heavier projectiles, like a steel ball, and swap out for a heavier limb. (The Steambow B08 comes with a 35 pound limb for reference).

View fullsize

Accuracy testing was performed from 30 feet downrange on a fresh paper target. I loaded the eight-round magazine with four black rubber balls and four soft foam balls. The Steambow B08 .68 Caliber Tactical Crossbow was hitting quite low at this 30-foot distance, forcing me to aim up at the top of the target just to get the shots on paper. The grouping was somewhat scattered all over the place, indicating that this is a launcher you probably want to be working with a little closer in, at around 20 feet would be better in terms of accuracy. Aiming is done using a built-in little green dot at the front, but there is no real sight adjustment to dial it in or change it. Optimally I would sugest putting a simple red dot sight on the picatinny rail.

Overall, the 35-pound Steambow B08 is built primarily for target shooting and is a great way to have fun with your buddies outside or even inside a garage. I definitely wouldn't want to shoot this for pest control unless you plan to upgrade to a heavier limb and denser ammo. For anyone looking for a cheap, fun plinker with reusable ammo, this launcher is a very entertaining choice.

You can find the Steambow B08 and other Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and accessories at:

• ReplicaAirguns.ca

• ReplicaAirguns.us

View fullsize

Today, we are checking out the second-generation Lil' Sure Shot Annie Oakley BB Rifle. This is essentially a Red Ryder-styled, spring-powered BB rifle.

If you are interested in seeing how this looks up close along with the specifications and details, make sure to check out the table-top video. Today is going to be all about shooting it.

Chronograph Velocity Test

To get started, I needed to warm up the chrony, which took a little bit of troubleshooting. I had an ongoing voltage issue with my chronograph lighting and had to use a voltage regulator set to almost exactly 7 volts to get it to work properly without a proper adapter.

Once the chrony was up and running, I put several rounds through the rifle to test the velocity. The velocity remained pretty consistent in the mid-300s, with shots recording at 341, 340, 333, 329, 334, and 332 fps. averaging out at 334.

View fullsize

Target Accuracy Performance

For the accuracy portion of the test, I set up a paper target 30 feet down range. Here is how the rifle performed:

• Grouping: After firing about 10 shots, the rifle got just over a two-inch grouping.

• Placement: The shots were well-centered from left to right, though it shot a little high even when aiming just under the bullseye. I noticed a few stray BBs came back, which happens if they hit metal instead of the cloth backboard, causing some high flyers. (This could of been me as the bulk of the shots all grouped really nicely)

• Sights & Adjustability: It can be a little tough on the eyes aiming black front and rear sights on a target when you need readers for most things, which may have contributed to some of those shots hitting slightly higher. You can adjust the elevation slightly by moving a little piece on the sight backward and forward to raise or lower it. The rifle also features a dovetail, allowing you to mount a nice optical sight or a red dot.

Trigger Pull & Feel

• Pull Weight: The trigger pull comes in at around 5 to 6 pounds.

• Action: It is fairly short with a pretty predictable break.

• Usability: It requires a little effort, but it is not a super hair trigger, making it perfect for youngsters who are just starting out with shooting.

Conclusion

Overall, the Annie Oakley Lil' Sure Shot delivers exactly what you want out of a classic, Red Ryder-styled spring-powered BB rifle: it's straightforward, reliable, and just plain fun to shoot. While you aren't going to get competition-level precision out of a smoothbore BB gun, holding a solid two-inch grouping at 30 feet and putting out very consistent mid-300s fps velocities proves that it is more than capable of handling your everyday plinking or indoor target practice.

What really makes this rifle shine is its accessibility. With a predictable 5 to 6-pound trigger pull that requires deliberate effort without being a super hair trigger, it is a fantastic option for youngsters who are just learning the fundamentals of shooting. Plus, the inclusion of a dovetail mount means there is room to grow with the shooter, you can easily slap a red dot on there if the standard black iron sights prove a bit too tough on the eyes against various target. If you are looking for an entry-level plinker that performs right where it should, this second-generation Lil' Sure Shot is a great place to start.

If you want to pick one of these up, links are in the description to buy in both Canada and the US.

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

View fullsize

The Umarex T4E TP50 Gen 2 continues to impress as one of the more powerful and practical compact less-lethal pistols currently available. In this field test review, I tested the all-black version using .50 caliber rubber-steel core rounds to see how it performs in terms of velocity, energy, and real-world accuracy. The black version is essentially the same as the orange-marked variant, just marketed a bit differently, with a more tactical appearance that may appeal to those looking for a serious training or home defense-style option.

For ammunition, I used the steel-core rubber balls rather than standard solid rubber rounds. These projectiles are slightly heavier and seem to carry noticeably more energy downrange without sacrificing too much velocity. In my opinion, they are probably some of the best ammunition choices for these types of pistols if maximum impact energy is your goal.

Velocity testing through the chronograph produced some very impressive numbers. The TP50 Gen 2 delivered readings of 319 FPS, 304 FPS, 310 FPS, 300 FPS, and 308 FPS, averaging just over 308 feet per second. With the steel-core rubber rounds weighing approximately 2.7 grams, the pistol produced roughly 12-13 Joules of muzzle energy using the Steel Core Rubber Balls but would have been closer the projected 15 Joules with all Rubber Balls, which is extremely respectable for a compact CO2-powered .50 caliber launcher. You can really hear and feel the power when firing this pistol, and it even generates noticeable recoil-like kick during shooting.

View fullsize

Accuracy testing was performed from 30 feet downrange using the six-round internal magazine. Paintball-style projectiles are naturally less precise than pellets or BBs due to their softer construction, surface ridges, and aerodynamic inconsistencies, but the Umarex T4E TP50 Gen 2 still delivered surprisingly solid grouping performance. After adjusting my aim slightly low due to the pistol shooting a little high initially, the remaining shots grouped well into the center portion of the target and produced clean, sharp holes through the paper target with about a 3 inch grouping.

In practical terms, this pistol clearly delivers enough impact energy to strongly discourage an attacker or aggressive threat. The steel-core rubber rounds hit extremely hard, especially considering the combination of high velocity and projectile mass. While heavy clothing would certainly absorb some impact, anyone wearing lighter clothing would absolutely feel these rounds. The all-black appearance also adds to the realistic tactical styling, which alone could act as a deterrent before a shot is ever fired.

Overall, the Umarex T4E TP50 Gen 2 proved to be accurate enough for close-range defensive-style use, delivered excellent power, and offered reliable operation throughout testing. The trigger feels good, the pistol handles nicely, and the performance with steel-core rubber ammunition was impressive across the board. For anyone looking for a compact CO2-powered less-lethal launcher with strong energy output and solid build quality, the TP50 Gen 2 is definitely worth considering.

You can find the Umarex T4E TP50 Gen 2 and other Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and accessories at:

• Buy the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol in Canada

• Buy Paintball Guns in the US

View fullsize

In this review, we are looking at two crossbows that honestly shouldn’t really be compared, but that’s exactly why this comparison is interesting. On one end, we have the Steambow M10, a compact, magazine-fed, fast-shooting crossbow built for fun, training, and high repetition shooting. On the other, the CenterPoint AT400, a full-size, high-powered compound crossbow designed for serious hunting applications.

Aside from both launching bolts/arrows, these two platforms sit at completely opposite ends of the spectrum. The goal here is not to declare a winner, but to help you decide which one actually fits your use case, or if you might want both.

Key Differences Overview:

Steambow M10

The Steambow M10 is a compact repeating crossbow designed more for fun, training, and high-volume shooting. It uses a magazine-fed system that can hold 10 bolts, allowing for very fast follow-up shots. Depending on the limb setup, it can reach speeds of up to around 200 FPS and produce approximately 10 to 15 foot-pounds of energy. Its lighter draw weight options and easy cocking system make it beginner-friendly and much less physically demanding to use. Overall, the M10 is best suited for target shooting, casual use, and potentially small game with the right setup.

CenterPoint AT400

The CenterPoint AT400 is a full-size compound hunting crossbow built for serious power and hunting use. Unlike the M10, it is a single-shot platform that focuses on accuracy, penetration, and range rather than fast repeat shooting. It sends arrows downrange at about 400 FPS and delivers close to 150 foot-pounds of energy, putting it in an entirely different class. With its roughly 200-pound draw weight, it requires much more effort to cock and reload, usually with a rope or crank system. This makes it better suited for medium to large game hunting, where power and shot placement matter far more than speed.

Side-by-Side Summary

If you want something lightweight, compact, fast, and easy to shoot often, the Steambow M10 is the better fit. If your main goal is hunting and you need maximum power, longer range, and serious downrange performance, then the CenterPoint AT400 is clearly the more appropriate choice. Even though both are crossbows, they are built for very different types of users and very different shooting experiences.

Power & Performance

The biggest separation between these two comes down to raw power.

• The Steambow M10 delivers up to about 10–15 foot-pounds of energy, depending on limb configuration and bolt weight. It’s comparable to higher-end airguns or paintball-level power.

• The CenterPoint AT400, by contrast, produces close to 150 foot-pounds of energy and launches arrows at around 400 FPS.

That’s not a small difference, it’s an entirely different category.

Real-world comparison:

• M10 = backyard shooting, small game potential

• AT400 = deer, and potentially even elk with proper shot placement

This is essentially the difference between a BB gun vs a hunting rifle in terms of role and impact.

View fullsize

Shooting Experience:

Steambow M10

• Magazine-fed (10 bolts)

• Extremely fast follow-up shots

• Break-action style cocking (very quick)

• Great for drills, repetition, and skill building

• Minimal effort required

You can realistically fire 10 shots in about 10 seconds, making it a very engaging and fun platform.

CenterPoint AT400

• Single-shot system

• Requires rope cocking or crank system

• Significant physical effort (200 lb draw)

• Slow reload (often 30–60+ seconds)

This is a deliberate shooting experience, not something designed for volume or speed.

Use Case Breakdown:

Steambow M10 – Best For…

• Backyard shooting (with proper backstop)

• Target practice

• Tactical-style drills

• High repetition training

• Casual and frequent use

• Lower-cost shooting (especially with rubber ball version)

View fullsize

You can even use:

• Rubber balls (low cost, reusable)

• Lightweight bolts

• Indoor-friendly setups (with proper safety)

CenterPoint AT400 – Best For…

• Hunting (deer and potentially larger game)

• Long-range accuracy

• Maximum penetration and power

• Purpose-driven shooting

This is not a casual-use product, you typically bring it out when it matters.

Ease of Use & Physical Demand:

Steambow M10

• Very easy to cock (even at lower draw weights)

• Beginner-friendly

• Lightweight (~compact platform)

• Minimal fatigue

View fullsize

CenterPoint AT400

• High effort required

• Needs cocking tools (rope or crank)

• Physically demanding

• Slower workflow between shots

Key takeaway:
Anyone can pick up and use the M10 easily. The AT400 requires more commitment, strength, and practice.

Size & Portability

Steambow M10

• Compact and lightweight

• Can be partially disassembled easily

• Backpack-friendly

• Ideal for mobile use

CenterPoint AT40

• Large, fixed structure

• Not easily transportable without a case

• Designed for field carry, not casual portability

Ammo & Cost of Ownership:

View fullsize

Steambow M10

• Bolts are smaller and cheaper

• Rubber ball version = extremely low cost

• Less wear and tear overall

• High reusability

CenterPoint AT40

• Arrows are larger and more expensive

• More prone to damage/loss at high speeds

• Requires maintenance and replacement over time

Value Consideration:

Interestingly, both fall into a similar price range (~$400–$500), but value depends on usage frequency:

• M10 → Likely used often → Higher practical value

• AT400 → Used less frequently unless hunting regularly

If something sits unused, its value drops regardless of price.

View fullsize

Who Should Buy Each?

Choose the Steambow M10 if you…

• Want fun, fast shooting

• Plan to shoot frequently

• Prefer low effort and ease of use

• Don’t need high power

• Enjoy tactical or training-style shooting

Choose the CenterPoint AT400 if you…

• Are hunting (especially deer or larger game)

• Need high power and penetration

• Value accuracy and range

• Don’t mind slower reload times

• Are comfortable with physical effort

View fullsize

Final Thoughts

These two crossbows are not competitors—they are tools for completely different jobs.

• The Steambow M10 is about frequency, fun, and versatility

• The CenterPoint AT400 is about power, precision, and purpose

If anything, this comparison highlights that you may not need to choose one over the other, you might actually benefit from having both ends of the spectrum covered.

If neither fits perfectly, then the real answer may be to look for something in the middle.

Where to Buy

Both of these crossbows (or similar models) are typically available through:

• Buy Steambow M10 in Canada

• Buy CenterPoint AT400 In Canada

• Buy in the US

View fullsize

In this table top review, we’re taking a look at the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol, part of Umarex’s T4E (Training for Engagement) lineup. This version is marketed more as a tactical training pistol, while its nearly identical counterpart, the HDP50, is positioned toward home defense.

At first glance, the TP50 and HDP50 look almost identical. The main visual difference is that the TP50 comes in an all-black finish, while the HDP50 features an orange slide. Beyond that, the functionality, performance, and specs are essentially the same.

Key Features and Specifications

• Manufacturer: Umarex

• Model: T4E TP50 Gen 2

• Caliber: .50 caliber

• Power Source: 12g CO2 (quick piercing system)

• Action: Semi-auto, double action trigger

• Magazine Capacity: 6 rounds (internal inline magazine)

• Velocity: Rated up to 465 FPS

• Energy: Claimed 11 joules (can be higher depending on ammo)

• Barrel Length: ~4 inches

• Overall Length: ~8 inches

• Weight: ~1.5 lbs (0.7 kg)

• Construction: Polymer frame and slide with metal internals and barrel

• Safety: Integrated trigger safety

• Rail: Under-barrel Picatinny rail

• Sights: Fiber optic front and rear

View fullsize

Overview and First Impressions

The TP50 Gen 2 is a compact, .50 caliber paintball-style pistol designed for training, recreational shooting, and less-lethal applications. It has a solid feel in the hand, not too heavy, not too light, and resembles a full-size handgun profile, similar in size to a large-frame pistol.

Despite its polymer exterior, the internal components that matter, especially around the CO2 system—are metal, giving it durability where needed.

CO2 System (Quick Piercing Feature)

One of the standout features is the quick piercing CO2 system:

• Insert the CO2 cartridge (butt-first)

• Tighten the cap until snug

• When ready to use, give the bottom a firm “whack”

• A pin pops out on the back where you can see it to indicate the system is pressurized

This allows you to keep the pistol loaded but not activated, which is useful for storage or readiness situations.

View fullsize

Ammo Compatibility

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol supports a wide range of .50 caliber ammunition, including:

• Rubber balls

• Powder balls

• Paintballs

• Steel/rubber hybrid balls

• Pepper balls (limited availability in Canada)

Performance varies significantly depending on the weight of the projectile:

• Lighter rubber balls: ~450 FPS / ~13–15 joules

• Heavier projectiles: lower energy (down to ~7–11 joules)

View fullsize

What’s Included

• TP50 Gen 2 pistol

• Two tubes of 10 rounds each (powder + rubber balls)

• Barrel cleaning squeegee

• Instruction manual

• Cardboard packaging (blue “tactical pistol” branding)

View fullsize

Walkaround Highlights

• Fiber optic sights make target acquisition easy in various lighting conditions

• Textured grip and slide for solid handling

• Metal trigger with integrated safety

• Wide open barrel design

• Picatinny rail for adding lights or lasers

• Clear “Strike” marking for CO2 activation point

Overall, it’s a clean, functional design with a tactical look, especially in the all-black version.

View fullsize

Pros

• Compact size compared to other .50 cal pistols

• Wide variety of compatible ammo types

• Quick piercing CO2 system (very practical)

• Good power for its size (~11–15 joules range)

• Fiber optic sights improve usability

• Picatinny rail for accessories

• Realistic all-black tactical appearance

Cons

• Only 6-round capacity before reload

• Limited shots per CO2 (~3–4 reloads)

• Internal magazine (no quick mag swaps)

• Pepper ball ammo difficult to source in Canada

• Efficiency trades off for higher power

TP50 vs HDP50 (Quick Comparison)

• TP50: All black, marketed as tactical training

• HDP50: Orange slide, marketed for home defense

• Performance: Essentially identical

View fullsize

This difference is largely cosmetic and marketing-driven, so choosing between them comes down to preference and intended use.

Final Thoughts

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol is a solid, compact .50 caliber CO2 pistol that delivers respectable power in a manageable platform. It’s not designed for high-capacity shooting or efficiency, but rather for impact, simplicity, and versatility in ammo choice.

If you’re looking for a less-lethal option or a training pistol with realistic handling and solid performance, the TP50 fits that role well, especially if you prefer the more discreet all-black tactical look.

Where to Buy

• 🇨🇦 Buy the T4E TP50 in Canada: ReplicaAirguns.ca

• 🇨🇦 Buy the T4E HDP50 in Canada: ReplicaAirguns.ca

View fullsize

In this table top review, we’re taking a close look at the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This model fits into a long lineage of classic lever-action BB rifles, alongside well-known options like the Daisy Red Ryder and the Marlin variants from Crosman and Umarex. These rifles all share a similar concept, simple, spring-powered, lever-action BB guns designed for training, plinking, and beginner shooters, but each brings its own subtle differences in materials, styling, and features.

Key Specifications

• Model: Air Venturi Annie Oakley Lil’ Sure Shot

• Type: Lever Action Spring Piston BB Rifle

• Caliber: 4.5mm Steel BB

• Power Source: Spring (No CO2 Required)

• Velocity: Up to 350 FPS

• Magazine Capacity: 550 Round Internal Reservoir (Gravity Fed)

• Action: Lever Action

• Safety: Cross Bolt Safety

• Barrel: Smoothbore

• Stock: Stained Solid Wood

• Construction: Primarily Metal with Some Plastic Components

• Weight: Approx. 3.3 lbs

• Overall Length: ~36.25 inches

• Optics Rail: Removable Weaver/Picatinny Style Mount

First Impressions & Build Quality

The Annie Oakley Lil’ Sure Shot stands out with its classic Western styling, enhanced by engraved Annie Oakley branding on the wood stock. It’s a step above many entry-level BB rifles thanks to its real wood stock and metal lever, giving it a more authentic and durable feel compared to fully plastic alternatives.

Most of the rifle is metal and wood, though there are a few plastic components:

• Trigger

• Front sight (on the newer version)

• Adjustable portion of the rear sight

• Removable scope rail

Overall, it feels solid in the hands, lightweight, and well-balanced, especially for younger shooters or anyone new to lever-action rifles.

View fullsize

How It Works

This is a spring-piston, lever-action BB rifle, meaning:

• No CO2 or gas is required

• Each shot is powered by cocking the lever

• BBs are stored in a large internal reservoir

• You must tilt the rifle upward to gravity-feed BBs into position

With a 550-round capacity, you can shoot for quite a while before needing to reload, your arm will likely get tired before you run out of ammo.

Handling & Usability

This rifle is clearly designed with accessibility in mind:

• Lightweight (3.3 lbs) makes it easy to handle

• Shorter length and pull fits smaller shooters well

• Moderate cocking effort is manageable for beginners

• Lever action slows firing rate, adding a safety advantage for new users

Rifles like this are excellent for training because:

• They are easier to aim than pistols

• They encourage controlled shooting

• They are not overly powerful

Even for experienced shooters, these are simply fun and inexpensive for backyard plinking.

Sights & Optics

Out of the box, the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle includes:

• Fixed front sight (plastic on newer version)

• Adjustable rear sight (elevation only)

One notable feature is the removable Weaver-style rail, allowing you to:

• Mount a red dot or scope

• Or remove it for a more traditional look

Keep in mind the rail is plastic, so care should be taken when mounting optics.

View fullsize

Comparison to Similar BB Rifles

This rifle sits in the same category as:

• Daisy Red Ryder – The original classic

• Umarex Marlin Lever Action – Slightly more adult-oriented design

• Crosman Marlin (older models) – Direct Red Ryder competitor

All of these:

• Use lever-action spring systems

• Have internal BB reservoirs

• Shoot in the ~300–350 FPS range

The Annie Oakley version distinguishes itself with:

• Better visual styling

• Wood and metal construction

• Optional optics mounting

New vs Older Annie Oakley Version (Key Differences)

If you come across different versions, here are the main distinctions:

Newer Version:

• Longer barrel

• Plastic front sight

• Larger loading port (easier to load)

• Metal Lever

• Brighter, more polished wood finish

View fullsize

Older Version:

• Shorter barrel

• Metal front loading system (rotating port)

• Metal front sight (more durable)

• Plastic Lever

• Slightly darker, more matte wood

Both should perform similarly, but the newer version is a bit more refined with that quality all metal lever.

Pros

• Lightweight and easy to handle

• Real wood stock and metal lever construction

• Large 550-round capacity

• No CO2 required (low maintenance and inexpensive to shoot)

• Removable optics rail for flexibility

• Classic Western styling with Annie Oakley branding

• Great for beginners and younger shooters

Cons

• Plastic front sight (new version)

• Lower power compared to CO2 rifles

• Rear sight only adjustable for elevation

• Slightly higher price than some entry-level similar BB rifles

• Less realistic than shell-ejecting lever-action models

Final Thoughts

The Air Venturi Annie Oakley Lil’ Sure Shot is a well-built, visually appealing lever-action BB rifle that blends classic styling with modern usability.

It’s ideal for:

• Beginners and younger shooters

• Backyard plinking

• Anyone wanting a simple, reliable and fun BB rifle

While it doesn’t aim for full realism like higher-end shell-ejecting models, it delivers where it matters, ease of use, affordability, durability, and fun factor.

Available at:

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

Also check out ReplicaAirguns.com for additional articles, photos, and video reviews.

View fullsize

In this table top review, we take a close look at the Steambow B08 .68 Caliber Tactical Crossbow, a compact and versatile system designed for shooting rubber balls, paintballs, or foam projectiles. This model is particularly suited for controlled environments like indoor ranges (such as a sea can setup or even basement or backyard), thanks to its relatively moderate power and flexible ammunition options.

A full shooting test will follow separately, but for now, let’s break down the specifications, features, and what comes in the box.

Specifications

• Model: Steambow B08

• Caliber: .68 (rubber balls, paintballs, foam balls, etc.)

• System Type: Recurve crossbow

• Draw Weight: 35 lbs (standard included limb)

• Velocity: Up to 260 FPS (manufacturer claim)

• Energy: Approx. 7 ft-lbs (up to ~15 ft-lbs with stronger limbs)

• Magazine Capacity: 8 rounds (removable)

• Weight: Just under 4 lbs

• Length: 24.2 inches

• Width: 3.15 inches (body, excluding limb span)

• Height: 8.3 inches

• Materials: Fiberglass, metal, and polymer construction

• Stock: AR-style adjustable (6-position) with cheek rest and rubber butt pad

The B08 is distributed by Steambow GmbH (Austria) and is built on a modular platform compatible with other Steambow systems like the M10.

View fullsize

Key Features

Modular Platform

One of the standout aspects of the B08 is its modular design. The lower receiver is identical to the Steambow M10, meaning you can swap uppers to shoot either:

• .68 caliber balls (B08 upper)

• Crossbow bolts (M10 upper)

This gives users flexibility to adapt the platform for different uses.

Quick Change Limb System

The included 35 lb limb is easy to swap out:

• Secured by a single bolt

• Can be upgraded up to heavier options (up to ~120 lbs available)

• Allows tuning for power vs. ease of cocking

Magazine-Fed Repeater System

• 8-round removable magazine

• Spring-fed system with follower

• Auto-loading mechanism (not semi-auto, but fast cycling)

The system works by “breaking” or pulling back the stock, which:

• Cocks the string

• Loads the next round

• Prepares the trigger

Cocking Mechanism

• Shoulder-supported operation

• Pull stock inward to cock

• Very easy with 35 lb limb

• Allows relatively fast follow-up shots once familiar

Sighting System

• Fiber optic front sight

• Rear alignment via top trough channel

While simple, it works well for close-range shooting. However, the included Picatinny rails (top and bottom) allow for:

• Red dots

• Scopes

• Tactical accessories

Build & Ergonomics

• Polymer lower with reinforced components

• AR-style adjustable stock

• Adjustable cheek rest

• Rubber butt pad

• Included foregrip (user-installed)

Overall, the Steambow B08 .68 Caliber Tactical Crossbow has a solid, lightweight feel while still maintaining good handling characteristics.

What’s Included in the Box

The B08 comes well-packaged with multiple internal boxes and includes:

• Steambow B08 main unit

• 35 lb limb

• Foregrip

• 8-round magazine

• 25 “foam” balls (closer to hard nylon in feel)

• Protective shooting glasses

• Allen keys (for assembly and adjustments)

• String wax

• Extra string

• Mounting hardware

• Instruction manual

View fullsize

Note:
A small locking component for the upper assembly may come separate and is not clearly explained in the manual, but is required for proper function.

Operation Overview

• Load magazine with up to 8 rounds

• Insert magazine into front housing

• Cock by pulling stock inward

• Fire using single-action trigger

The ball is held in place by a simple groove and string system, guiding it forward during firing.

Performance Notes (Initial Impressions)

• Smooth and reliable operation

• Easy to cock with 35 lb limb

• Suitable for indoor shooting environments

• Compatible with various projectile types

Heavier limbs will:

• Increase velocity and energy

• Require more effort to cock

View fullsize

Pros

• Lightweight and compact (under 4 lbs)

• Modular system (compatible with M10 platform)

• Magazine-fed repeater design

• Easy cocking with included limb

• Quick-change limb system

• Picatinny rails for accessories

• Comes with useful extras

• Quiet operation

• Reusable ammunition options

Cons

• Higher price point

• No traditional rear sight included

• Learning curve for efficient operation

• Included limb may feel underpowered for some users

View fullsize

Final Thoughts

The Steambow B08 offers a unique blend of crossbow mechanics and tactical styling, combined with modular flexibility and relatively safe indoor usability. It’s especially appealing for users who want:

• A reusable ammo platform

• Quick follow-up shots

• Expandability with other Steambow systems

While the included 35 lb limb keeps it easy to use and accessible, upgrading the limb will unlock more performance potential for those looking for higher energy output.

Availability

Available through Replica Airguns:

• Buy the Steambow B08 .68 Caliber Crossbow in Canada

• US Archery Buying Options

A full shooting test and performance breakdown will follow in a separate review.

View fullsize

In this April 2026 unboxing, there’s a solid mix of power, realism, and variety straight out of the box. Even before opening it up, the size and weight of the package hinted that this wasn’t going to be a light or basic shipment. As usual, this is more of a first look and overview rather than a deep dive, with full tabletop and field test reviews coming later.

CenterPoint AT400 Compound Crossbow Kit (400 FPS)

The first item out of the box is easily the most substantial: an AT400 compound crossbow kit. This is not one of the smaller, backyard-friendly crossbows—it’s a full-sized, high-powered unit designed for serious use.

• Velocity: Rated around 400 feet per second

• Energy: Approximately 142 ft-lbs

• Features:

  • Detachable silent crank system for easier cocking

  • Picatinny rail for mounting optics or accessories

  • Full kit setup with multiple components included

This level of power puts it well into small-to-medium game hunting territory, making it more than just a recreational piece. Because of its size and power, testing it indoors isn’t really practical, so this one will likely get a detailed tabletop breakdown rather than a traditional shooting demo.

View fullsize

Umarex T4E TP50 Gen 2 (.50 Cal Tactical Pistol)

Next up is the Umarex T4E TP50 Gen 2, this time in the all-black tactical version rather than the more recognizable orange training model.

• Caliber: .50 caliber

• Velocity: Up to 465 FPS

• Ammo: Rubber balls (included in the box)

• System: CO2 powered with quick-pierce activation

This version stands out for a couple of reasons. First, the higher velocity suggests noticeably more energy compared to earlier or training-focused versions. Second, the all-black design gives it a much more realistic look, closer to a traditional firearm aesthetic.

Functionally, it uses a spring-fed internal magazine and a preloaded CO2 system, allowing you to keep it ready without gas leakage. When needed, a quick strike activates the CO2, making it immediately usable.

Based on typical .50 cal projectile weights and that velocity, this likely lands somewhere in the mid-to-high teens or possibly around 20 ft-lbs of energy, though exact numbers will be confirmed during testing.

View fullsize

E&L AKS-74N AEG Airsoft Rifle (Legends Series)

The final item in the box is a standout for realism: the E&L AKS-74N AEG airsoft rifle, branded under the “Legends / Legendary Perfection” line.

This is clearly built to replicate the real AK platform as closely as possible.

• Construction:

  • Real wood stock

  • Stamped steel receiver and metal components

  • Folding stock (magnetic lock)

• Operation:

  • AEG (Automatic Electric Gun)

  • Semi and full-auto firing modes

  • Adjustable rear sight (elevation)

• Extras:

  • Deans connector compatibility

  • Included specs sheet with velocity in m/s

The weight is immediately noticeable, estimated around 7–8 pounds, which adds to the realism. The combination of real wood furniture and steel construction gives it a very authentic feel compared to lighter, polymer-heavy Airsoft rifles.

The included magazine is polymer, but it should be compatible with standard AK-style AEG mags, meaning upgrades or swaps are likely straightforward.

Final Thoughts

This unboxing delivers a strong mix across three very different categories:

• High-power archery platform (AT400 crossbow)

• Compact CO2-powered .50 cal pistol (TP50 Gen 2)

• Full-metal, real wood AEG rifle (E&L AKS-74N)

Each item targets a different type of user, from tactical training and backyard use to collectors and realism-focused Airsoft enthusiasts.

As always, this is just the first look. Full tabletop reviews, comparisons, and field tests will break down real-world performance, usability, and value.

For availability and full write-ups, check:

• ReplicaAirguns.ca (Canada)

• ReplicaAirguns.us (USA)

• ReplicaAirguns.com (reviews and videos)

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

Today we’re looking at the A&K M1873R (the R version). There are a few different versions of this rifle in the lineup (some more compact, some more full-length), and the manual actually shows the variations so watch the video where I point that out.

This is a Table Top Review only, so we’re focusing on specs, details, and a walk-around. I was hoping to follow this up quickly with a Shooting / Field Test Video, but my sample has an issue: it’s leaking gas when I try to fill it (I tested with propane/green gas). I’ll need to sort that out first (repair or replacement), so the field test will have to wait until that’s resolved.

Here some links where you can buy the A&K M1873R in our Canada Replica Airguns and US Replica Airguns Stores

View fullsize

Specifications

• Manufactured By: A&K – Made in China

• Type: Gas-powered airsoft lever action rifle (non-blowback)

• Ammunition: 6mm plastic airsoft BBs

• Power Source: Green gas / propane (internal gas reservoir)

• Action: Lever action / manual cycle (one shot per lever cycle)

• Capacity: 25-round internal magazine (side loading gate)

• Velocity: Approx. 350–400 FPS with 0.20g BBs (temperature/BB weight dependent)

• Hop-Up: Adjustable hop-up system

• Build / Materials:

  • Real wood stock

  • Metal receiver and barrel assembly

  • M-LOK handguard (tactical “modern western” styling)

  • Top Picatinny rail (optics ready)

  • Brass butt plate

• Controls / Features:

  • Enlarged lever loop (glove-friendly)

  • Integrated lanyard ring / sling hoop

• Weight: 4.8 lbs (2.18 kg)

• Overall Length: 27.2 inches (69 cm)

• Barrel Length: 8 inches (20.3 cm)

In the Box

• A&K M1873R rifle

• Mock suppressor (cosmetic)

• Speed loader (you’ll want this for loading the internal magazine)

• Tools / Allen keys

• Small bag of airsoft BBs

• Simple 1-page manual

View fullsize

Manual Notes: Different Versions

The manual shows several versions of this lever action platform. Some are more compact and some are more traditional full-length lever rifles. There’s also a version that appears to run without the longer front barrel extension setup, which, honestly, is the version I’d personally lean toward since the included mock suppressor is mostly cosmetic.

Walk Around

This is a really sharp-looking rifle, it has that classic lever gun vibe thanks to the real wood stock and brass butt plate, but then it mixes in a modern tactical look with the M-LOK hand-guard and top Picatinny rail.

A few key points when handling it:

• No sights included: there are no iron sights on this rifle, so you’ll want to add your own optic (red dot, scope, or rail-mounted irons).

• M-LOK handguard + top rail: lots of freedom to build the look you want, keep it clean, or “tactical western” it up with accessories.

• Internal mag / side loading gate: loads like a real lever gun, through the side. The external profile stays clean (no big mag hanging out).

• Enlarged lever loop: easier to run with gloves or bigger hands, and it just looks right on this style of rifle.

• Sling / carry: it includes a metal lanyard ring / sling hoop, so carrying it is easy if you want it strapped while moving around.

View fullsize

Mock Suppressor and Gas Fill

The included “suppressor” is mainly for looks. It does have an orange front, and it doesn’t function as a suppressor (it’s not extending the inner barrel either).

Important practical detail: you’ll need to remove the mock suppressor to access the gas fill valve, which means you’ll want to keep the included tool (or something similar like a washer/coin that fits) with you.

Issue With My Sample: Leaking Gas

My review sample is leaking at the fill area. It looks like someone may have tried to seal it (there appears to be silicone or residue), and there are a few scratches that make me suspect this unit could have been a return. I tried tightening it, but it still leaks and it may be stripped.

This is not what you should expect out of a normal new unit, but I want to mention it because it’s the reason I’m holding off on the field test until it’s fixed.

View fullsize

Pros

• A lever action gas Airsoft rifle is just plain fun (and there aren’t tons of these around)

• Classic look with real wood + brass butt plate, but still has modern utility with M-LOK up front

• Feels solid in the hands (doesn’t feel cheap)

• Top Picatinny rail makes optics easy (and you’ll want optics since there are no sights)

• 25-round internal magazine keeps the outside profile clean

• Enlarged lever loop is great for gloves or cold-weather play

• Lanyard ring / sling hoop makes it easy to carry

• Speed loader makes loading fast once you get the hang of it

• You can run it more compact by skipping the mock suppressor (it’s optional)

Cons

• The internal 25-round magazine is awkward to load without the speed loader, don’t lose it

• Green gas performance is temperature sensitive, which can affect consistency in colder weather

• Not a fast follow-up shooter, you must work the lever for every shot (part of the charm, but it’s a limitation)

• You’ll need to add your own sights/optic (none included)

• The included mock suppressor must be removed to fill gas, which adds a little extra handling

View fullsize

Final Thoughts

The A&K M1873R is a really cool “modern western” mashup, classic lever action styling with real wood and brass, but with M-LOK and a top rail so you can build it out however you want. Lever guns force you to slow down and actually enjoy the shooting experience, and that’s a big part of why they’re so popular (even outside of Airsoft).

Once I get the leak issue sorted on my sample, I definitely want to do the field test, because this is exactly the kind of unique platform that deserves to be shot and evaluated properly. On the table, it looks great, feels solid, and offers a lot of customization potential, you just have to go in knowing it’s lever-action manual cycling, it uses green gas/propane (so temperature matters), and you’ll need to add your own optic since there are no sights included.

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US

Type: Airsoft Rifle
Manufacturer: KJWorks
Model: M700 Take Down
Materials: Metal with textured synthetic stock
Weight: 7.5 pounds (3415 grams)
Barrel: Smooth bore barrel
Propulsion: Gas operated (Green Gas or Propane)
Action: Bolt
Ammunition Type: 6mm plastic Airsoft BB’s
Ammunition Capacity: 10–11 round metal magazine
FPS: Up to 450 FPS

View fullsize

Trigger Pull: The trigger on the KJWorks M700 Take Down Gas Airsoft Sniper Rifle performs as expected for a bolt-action style hunting or sniper rifle. Most of the work is done when operating the bolt, leaving your trigger finger with a light, short, and crisp pull to release the firing pin. This shlep a lot keeping everything steady since you can relax your grip adn really focus on your shot placement.

View fullsize

Accuracy: Be sure to watch my full Field Test Shooting Video for the KJWorks M700 Take Down Gas Airsoft Sniper Rifle to see its performance in detail. I only tested it indoors at my Sea Can range due to cold weather conditions, which aren’t ideal for gas guns. Shooting distance was limited to about 30 feet, but I plan to revisit this rifle outdoors in better weather for longer-range results. At 30 feet, the M700 produced a tight 1-inch grouping and averaged around 400 FPS using .25-gram Airsoft BB’s.
Note: I did encounter some magazine loading issues when fully loaded, BBs from the right side of the double-stack magazine occasionally jammed and didn’t feed properly into the breach.

View fullsize

Build Quality: The KJWorks M700 Take Down Gas Airsoft Sniper Rifle feels solid and well-made throughout. The fit and finish are good, and all the mechanical components functioned properly aside from the occasional BB feed issue. I like the textured synthetic stock and soft rubber butt pad. This rifle features a lot of metal construction, including the bolt, inner and outer barrel, magazine, sling and bipod mounts, trigger and guard, Picatinny rail, and safety. It feels robust and well-balanced overall.

View fullsize

Realism: The KJWorks M700 is modeled after the Remington 700 platform, giving it a very authentic hunting rifle look. The Airsoft version mimics the real firearm closely in both form and function. Since it’s powered by Green Gas rather than a spring, the bolt action is smooth, light, and realistic to operate. All the parts that would normally be metal or steel on the actual Remington M700 are also made out of Metal with the Airsoft version. The stock is also Fiber reinforced like the real stele version.

View fullsize

Pros:

• Gas-operated bolt is far easier to cycle than a traditional spring-powered bolt rifle.

• Heavy use of metal parts throughout.

• Excellent balance and solid overall feel.

• Take-down design makes it easy to transport and store.

• Fiber-reinforced stock adds durability.

• Metal sling and bipod mounts for customization.

• Full-size drop-out metal magazine holds both gas and BBs.

• Easy-to-adjust hop-up screw.

• Ideal FPS for long-range shots without being overpowered.

• Consistent accuracy, good 30-foot performance should translate well to longer distances.

View fullsize

Cons:

• No sights or optics included, you’ll need to add your own.

• Occasional magazine feeding issues, especially when fully loaded.

• Slightly higher price compared to most spring-powered bolt-action Airsoft rifles.

View fullsize

Comments:
I’ve tested a few spring bolt-action Airsoft rifles before, and while those are simple (just load BBs and shoot), the gas-powered M700 offers a much smoother and faster bolt operation, perfect for quick follow-up shots. When seconds matter and targets are closing in, that speed can make a real difference.

The KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a great ready-to-shoot platform out of the box and can be easily upgraded with a sling, bipod, and of course, a scope, since it comes without sights.

My review unit had a minor magazine issue, but I believe this was specific to the sample I received and not a widespread problem. Overall, it’s a very capable and well-built Airsoft sniper rifle that delivers solid power, realism, and usability.

• Buy the G&G RK Beta AK AEG Airsoft Rifle in Canada

• Buy the AK AEG Airsoft Rifles in the US

View fullsize

I tested another Steambow model in this Field Test Shooting Video, the Steambow AR Series M10 Tactical Crossbow. Like my other Crossbow Field Test videos, I recorded the Chronograph velocity while I was shooting the target so there was no need for separate segments, everything was done in one go with four cameras rolling. I didn’t put a dedicated camera on the Chronograph because I wanted a camera on the target; my camera glasses generally pick up the chrono readings anyway. I only have so many cameras, but everything recorded as planned. If you want the full specs and a closer look at the M10, watch my dedicated Table Top video.

Steambow quotes about 190–200 fps for the AR Series M10. My six chrono readings were 189, 191, 189, 189, 190 and 191, which worked out to a 190 fps average. Using the included 142-grain, 6.5-inch aluminum bolts produced roughly 11.4 foot-pounds of energy, so both velocity and FPE were basically on target with Steambow’s numbers. That’s adequate for small pests, but humane shots always come down to accuracy, you’ll want head or shoulder placement, and I’m not ready to declare any compact crossbow a guaranteed solution for that. Test accuracy for yourself.

View fullsize

For accuracy I shot six rounds at a paper target 30 feet downrange from my usual seated in the back, hands rested up front shooting position. The first shot from the Steambow AR Series M10 Tactical Crossbow was a few inches low, so I adjusted my point of aim up and ended up with an impressive 1-inch, 4-shot group just left of center. One bolt missed the target entirely, could have been me or a bad bolt (I’ll blame the bolt on that one). Still, for a compact crossbow this was an excellent result, comparable to some pellet rifles.

Overall the Steambow AR Series M10 Tactical Crossbow performed really well. I like the cocking and bolt-feeding system, cocking is simple: shoulder the stock, press the release, then pull the front down using the foregrip for leverage. Even with the higher power of this model you don’t need a lot of strength, and with practice follow-up shots can be quick. I’d add a red dot to the rail to help dial in accuracy and buy a few extra bolts for target practice and hunting. The M10 is one of Steambow’s pricier offerings, but it also has the highest ammo capacity and the most customization options. If you want the ultimate compact crossbow setup, the ability to preload multiple bolts and have extra 10-shot magazines on hand makes the M10 the one to consider.

• Buy the Steambow M10 Tactical Recurve Crossbow in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

I’ve tested a few compact crossbows before, but nothing with a multi-bolt loading system like the Steambow setup I’m testing in this video. As with my other Crossbow Field Test videos, I recorded Chronograph velocity at the same time I was shooting the target so I didn’t need two separate segments, I did it all in one pass with lots of cameras rolling. I didn’t dedicate a camera to the Chronograph for this test because I wanted a camera focused on the target; my camera glasses usually capture the Chronograph readings for me. I only have so many cameras, but everything was captured fine. If you want to learn more about the specifications and details of the Steambow AR-6 Stinger II, then watch my dedicated Table Top Video located here.

Steambow lists 180 fps as the claimed velocity for the Steambow AR-6 Stinger II Tactical. I consistently measured right around 160 fps, pretty close to the claim. Using the included 142-grain, 6.5-inch aluminum bolts my chrono readings ranged from 159 to 164 fps, averaging 163 fps, which is very consistent. That produced about 8.4 foot-pounds of energy, so both velocity and FPE were a little under Steambow’s stated numbers. That’s enough for small pests, but humane shots depend on accuracy, you’ll want head or shoulder placement, and I’m not fully convinced this bow is always up to that task. You’ll need to judge its accuracy for your own use.

View fullsize

On elevation (up and down) the Steambow AR-6 Stinger II was fairly accurate. Where it struggled more was windage: I had to aim noticeably to the right to move bolts toward the bullseye. The sight is very basic (a single fiber-optic post just behind of the Picatinny rail), which likely contributed to the windage issue. Despite that, I managed a roughly 4-inch group at 30 feet, with one bolt behaving like a flyer.

Overall the Steambow AR-6 Stinger II performed well. I really like the cocking and bolt-feeding system — cocking is easy by shouldering the stock, pressing the release, then pulling the front of the bow down using the foregrip for leverage. You don’t need to be super strong to do it, and with practice you could get very quick at follow-up shots. I’d definitely add a red dot to the rail to help dial in accuracy, and I’d buy a few extra bolts for target and hunting. The AR-6 Stinger II is pricier than some basic models, but the ability to preload multiple bolts in the built-in clip and unleash six shots in seconds makes the extra cost worth it to me.

• Buy the Steambow AR-6 Stinger II Tactical in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

I first reviewed the KJWorks M700P (the “P” for Power) back in 2018, so I was curious to see how the standard take-down version would perform. Ideally you’d mount a 3x (or higher) optic and test it at outdoor sniper ranges more typical for Airsoft sniper play, but the weather was rubbish for this session. Like last time with the M700P, I ended up doing the review inside my sea-can airgun range, which is fine for chronograph work but limits targets to about 30 feet.

For the indoor velocity test of the KJWorks M700 Take Down Gas Airsoft Sniper Rifle, I shot .25-gram plastic BBs through my Chrony. Over a five-shot string I averaged 403 fps, slowest was 400 fps and the fastest 406 fps, so reasonably consistent for a gas rifle. The gas mag was fully topped up with propane and the ambient temp was about 17°C (63°F). Lighter .20-gram BBs would of course register higher speeds, though in sniper builds you’ll often end up using heavier BBs than .20 g for better downrange performance.

View fullsize

Using the same .25-gram BBs for a close-range accuracy test at roughly 30 feet, the M700 Take-Down put most shots into about a 1-inch group with one odd flyer out to the right, could have been a bad BB or user error. I ran the test with a simple red dot since the rifle ships with no sights and I only needed something quick on the Picatinny rail for close work. I also had trouble getting all ten rounds from the 10-round mag onto the target because of some misfeeds / misreads; I don’t recall the M700P exhibiting this behavior, so it may be a quirk specific to my test unit.

Overall the KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a nicely executed sniper-style Airsoft rifle — very easy to dismantle and carry in a pack, reasonably gas-efficient, quiet, and powerful enough for the role. The feeding hiccup seemed to crop up when the follower was near the top of the stack (spring tension at its peak) and mainly affected BBs on the right side of the double-stack magazine — which makes me suspect a defect in my sample rather than a design choice. It doesn’t come with sights, so you’ll need to pick up a scope or optic, and personally I prefer the take-down model for its extra versatility.

• Buy the KJWorks M700 Take Down Gas Airsoft Sniper Rifle in Canada

• Buy Airsoft Sniper Rifles in the US

View fullsize

In this Field Test Shooting video for the Umarex Marlin Old West CO2 BB Revolver I check real-world performance: first I measure fps using a fresh standard 12-gram CO2 cartridge and 4.5 mm steel BBs through my chronograph. After that I hang a paper target at 30 feet and fire 10 rounds using the Single-Action-Only trigger to see what kind of grouping the revolver delivers straight out of the box. If you haven’t already seen my Tabletop Video Review for the John Wayne Marshal CO2 BB Revolver, watch that for full specs and close-up footage.

For the velocity test I put five shots through the chronograph. The slowest registered 345 fps and the fastest hit 416 fps, with an average of 403 fps, right in line with Umarex’s claimed 400 fps. Perfect for popping cans and casual plinking out to roughly 30–40 feet. The test was done inside a sea can at about 18°C (≈64°F), which gives a middle-of-the-road CO2 performance; warmer weather will typically push velocities higher.

View fullsize

Next I set the paper target on my pellet trap at 30 feet. Using my usual semi-rested position (hands braced on a front sandbag and seated on a stool), I fired 10 rounds with the Marlin Old West. The group measured roughly 4 inches, a bit left and just slightly high from the bullseye — not far off and similar to the grouping I got with the John Wayne Marshal CO2 BB Revolver, although the Marlin’s velocity numbers were notably higher.

The Umarex Marlin Old West CO2 BB Revolver is an inexpensive, mostly-plastic Single Action Army style revolver. There’s a fair amount of polymer in the construction, but it still feels solid despite being on the lighter side. That lighter weight can make the gun feel a bit twitchy in the hand compared with heavier replicas, which can affect accuracy. At the time of this video the Canadian price was about $99, which makes it good value — especially since it loads 18 rounds quickly compared with traditional shell-loading revolvers, meaning more trigger time with less fuss. There are a number of similar replica revolvers available from our Replica Airguns stores in Canada and the US, so check our stock if you’re shopping around.

• Buy the John Wayne Marshal CO2 BB Revolver in Canada

• Buy the John Wayne Marshal CO2 BB Revolver in the US

View fullsize

Type: BB Pistol.
Manufacturer: Distributed by Umarex
Model: Marlin Old West Revolver
Materials: Mostly plastic, some internal metal parts.
Weight: 1.2 pound (544 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.5 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 400.

View fullsize

Trigger Pull: The trigger on the Umarex Marlin Old West CO2 BB Revolver is single-action-only, so you must cock the hammer before each shot. That removes most of the trigger travel and effort, giving the Marshal a short, light, and easy-to-manage pull. It’s ideal for deliberate, accurate shooting, but less suited to action-style rapid fire unless you’ve got a very fast thumb.

View fullsize

Accuracy: I haven’t tested the Marlin Old West model specifically, but it should perform very similarly to the John Wayne Marshal CO2 BB revolver, they’re nearly identical aside from licensing, safety, and magazine placement. In my field test of the John Wayne Marshal it averaged closer to 360 fps rather than the claimed 420 fps and produced roughly a 4-inch, 10-shot group at 30 feet. You can watch that video here; I’ll hope to be posting a dedicated field test for the Umarex Marlin Old West soon.

View fullsize

Build Quality: There’s not a lot to get excited about in terms of materials, the Umarex Marlin Old West CO2 BB Revolver is mostly plastic with some internal metal parts like the barrel, trigger, hammer, and CO2 components. It follows the common two-half, screwed-together budget construction, which looks cleaner on the side where the screws are hidden. At just over a pound it’s fairly light. With relatively few moving parts, it should be reasonably reliable; the mechanical components do what they need to do and feel suitably solid for the price.

View fullsize

Realism: At first glance the John Wayne Marshal CO2 BB revolver resembles a Colt Single Action Army Revolver in shape and size, but it’s much lighter, about half the weight. The lack of real bullet openings in the cylinder (when viewed from the front) reduces realism. I’m used to the newer generation of revolvers with working cylinders and loadable, removable shells; those are pricier and hold fewer rounds, but they offer a much more authentic experience.

View fullsize

Pros:

• A decent looking replica of a Colt Single Action Army Revolver.

• Single action only trigger is short and light and well suited to careful shot placement shooting.

• 400 claimed fps is about perfect for plinking at ranges up 30-40 feet.

• 18 round magazine has a nice high capacity and easy to load when empty.

• Should get lots of shots per CO2.

• Safety is well hidden underneath just in front of the trigger guard.

• I like the look with the all black receiver and simulated wood grips.

• CO2 Allen key is built into grip so always have it on hand and will not lose it.

• Marlin licensed and seems to be $50 less than the almost exact same John Wayne version.

Cons:

• Mostly plastic builds makes it a bit light in the hand.

• No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

• Not a big fan of the clamshell plastic packaging.

View fullsize

Comments:
The Umarex Marlin Old West CO2 BB Revolver is a solid choice if you want an old-west single-action cowboy BB shooter for less than the nearly identical John Wayne Marshal (it’s about $50 cheaper). If you want more authenticity, consider one of the shell-loading Single Action Army style revolvers, they cost more, shoot a bit slower, and carry fewer rounds, but they deliver a much higher level of realism.

• Buy the Umarex Marlin Old West CO2 BB Revolver In Canada

• Buy the Umarex Marlin Old West CO2 BB Revolver in the US