View fullsize

A lot of folks look at Replica Airguns and write them off as just toys or backyard plinkers. Spoiler alert: they are far from toys. In fact, Replica Airguns are some of the most practical, cost-effective, and accessible firearm training tools available on the market today. Whether you're running a full-blowback 4.5 mm steel BB pistol, a gas blowback Airsoft sidearm, or even a 43 caliber rubber ball trainer, these platforms offer real-world training benefits that transfer directly to live firearms.

Below, we break down how Replica Airguns stack up against real steel across the core fundamentals of shooting.

1. Holster Draw & Presentation

• The Comparison: High-end replica pistols feature 1:1 scale dimensions and realistic weight compared to their firearm counterparts. They fit into standard duty, concealed carry, and competition holsters with zero fuss.

• The Training Advantage: Practicing draw stroke and presentation from a holster requires massive repetition to build muscle memory. Replica Airguns give you that identical feel, but with a massive safety buffer. If you suffer an accidental discharge during a high-speed draw-and-fire drill, an Airsoft BB or steel BB might leave a bruise or require a minor patch-up, but it won't cost you a limb or your life.

2. Trigger Control & Grip Technique

• Trigger Feel: Full-blowback Replica Pistols replicate single-action/double-action trigger weights, pulls, and resets very closely to real steel guns. (Keep in mind that non-blowback or partial-blowback models often have heavier, double-action-only trigger pulls due to internal indexing).

• The Grip Technique: Building a solid modern shooting grip transfers 100% to Airguns.

  • Your strong hand pushes forward slightly into the backstrap with relaxed finger tension so you don't jerk the trigger.

  • Your support hand clamps down hard like a vise, pulling backward to lock the pistol into place.

• Practicing this push-pull clamping technique on an Airgun builds clean muscle memory without introducing flinching.

View fullsize

3. Recoil Management & Sight Transition

• Where Airguns Differ: While full-blowback Airguns provide a snappy mechanical cycling sensation, they don’t generate the sharp muzzle rise and concussive kick of a live 9mm or .45 ACP round. An Airgun slide tends to cycle and dip forward quickly, whereas a real gun snaps violently upward.

• The Takeaway: You won't get identical recoil impulse, but your eyes and hands still have to track the sights as the slide moves. It teaches rapid target acquisition, sight alignment, and consistent presentation between shots at a fraction of the physical fatigue.

4. Reloads & Malfunction Drills

• Clearing Drills: You can practice tap-rack-bang, speed reloads, and slide manipulations just like on the range.

• Important Safety Tip: If you are practicing slide-racking drills with an airgun, do it dry without BBs loaded in the magazine. Unlike live firearms (which eject the unfired cartridge when racked), cycling an Airgun slide repeatedly will often chamber multiple BBs into the breech.

• Practicing stoppages and magazine drops with Airguns lets you run fast drills at home without the hazards of live ammo.

5. Cost & Durability

• Operating Cost: Real ammunition adds up fast, a single box of 50 rounds of 9mm often runs $30 to $50. With an Airgun, that same round count in CO2 and BBs costs literally a couple of dollars. You can shoot 10 to 20 times more rounds on an Airgun budget.

• Build Quality: Real firearms are built from hardened steels and durable polymers meant to withstand thousands of high-pressure explosions. Replica Airguns are engineered for lower internal pressures, often utilizing aluminum alloys and cast metals. While they last for thousands of rounds, dropping an Airgun on concrete can damage components more easily than a live firearm. Treat them with care!

View fullsize

6. Training Environment & Accessibility

• No Range Trip Required: Live firearms require dedicated range time, travel, fees, and strict transport regulations (especially here in Canada with transport permits and licensing).

• Backyard & Basement Friendly: With an appropriate trap and backstop, Airsoft and rubber-ball guns are perfect for indoor garage or basement practice, while steel BBs excel in safe outdoor home setups. You can get quality reps in during 15 minutes of free time after dinner without ever packing up a range bag.

The Verdict

Are replica airguns a complete 100 %$ replacement for live-fire training? No, you still need live range time to master heavy recoil management and acoustic discipline.

However, for mastering the holster draw, establishing sight alignment, refining trigger pulls, and building consistent grip mechanics, Replica Airguns are second to none. They make high-frequency shooting training safe, cheap, and convenient.

What's Next?

Stay tuned next week, we have a mystery box unboxing arriving at the table with some brand-new product or products lined up for comprehensive reviews!

• Make sure to subscribe to the channel on YouTube, Vimeo, and Rumble.

• Follow our community updates on Instagram, Facebook, and Twitter.

• Ready to gear up? Visit ReplicaAirguns.ca (Canada) or ReplicaAirguns.us (USA) for pistols, rifles, CO2$ and training accessories.

View fullsize

While waiting for new guns to arrive for field and tabletop testing, it is the perfect time for an educational breakdown of blowback versus non-blowback Replica Airguns. When choosing between these styles, the core decision comes down to a trade-off: do you want the ultimate realism, or do you want maximum power and gas efficiency?

View fullsize

Full Blowback: The Ultimate Training Tool

Full blowback airguns are designed for the shooter who wants a true trainer with the most realistic functionality and breakdown.

• The slide cycles completely back with every single shot to provide simulated recoil.

• These models generally feature a true single-action trigger, which gives the shooter a lighter and shorter trigger pull.

• When the magazine is out of ammunition and the follower reaches the top, the slide will lock back just like a real firearm.

• They typically use full-size drop-out metal magazines that hold both the BBs or Airsoft BB’s and the CO2 cartridge.

• The main downside is that they require a massive amount of CO2 to simultaneously propel the ammunition and aggressively cycle the slide.

• This high gas usage causes the gun to cool down much quicker, which noticeably lowers the velocity of your shots.

• If the gun gets too cold during rapid fire, the CO2 valve can become sluggish and even lock open.

View fullsize

Non-Blowback: Power and Efficiency

Non-blowback airguns are built for the shooter who wants the most power and the highest number of shots to break targets downrange.

• The slide remains completely fixed in place and does not cycle when the gun is fired.

• Because there is no slide to cock the internal hammer, they rely on a true double-action trigger, resulting in a heavier and longer pull.

• While some models have full-size drop-out magazines, it is very common for non-blowback guns to use thinner stick magazines.

• They are significantly more efficient because all the CO2 is dedicated solely to firing the ammunition out of the barrel.

• The lack of blowback action means the gun does not cool down nearly as fast.

• They deliver higher overall shot velocities and can operate much more reliably in slightly colder temperatures.

View fullsize

Partial Blowback: The Middle Ground

For those who cannot decide between the two extremes, partial blowback models offer a compromise between realism and efficiency.

• The slide still cycles to provide simulated recoil, but it only travels part of the way back.

• The trigger feel sits somewhere between a true double-action and a single-action pull.

• They consume less gas than a full blowback model, but they still use more than a non-blowback model.

• They usually come equipped with full-size drop-out metal magazines.

• Many newer partial blowbacks feature a system where pulling the trigger pushes the BB directly into the barrel to create a tight seal, resulting in excellent CO2 efficiency and higher velocities than a full blowback Airgun.

Whether you are looking for Airguns, Airsoft rifles, Pellet guns, Blank guns, or Accessories, Canadians can shop at replicaairguns.ca and US customers can shop at replicaairguns.us. You can also explore thousands of past video reviews and connect on Facebook, Twitter, Instagram, Rumble, YouTube, and Vimeo.

View fullsize

Welcome back to Replica Airguns. I get asked all the time about which airguns hit the hardest, but a lot of people focus on the wrong attributes. They often look strictly at velocity instead of the raw energy and blunt force required for different tasks.

In this guide, we are breaking down the four main types of airgun ammunition: Airsoft, steel BBs, lead pellets, and rubber balls. The goal is to show you exactly what each ammo type excels at and where they fall short so you can choose the right tool for your specific needs.

View fullsize

6mm Airsoft: Safe Training and Plinking

Airsoft guns fire 6mm round balls, which are generally made of plastic, though you can find copper or zinc-coated variants. Because these are some of the lightest projectiles, ranging from 0.20 to 0.45 grams, they have the lowest overall energy and often lower velocities.

• Best For: Airsoft is ideal for force-on-force skirmishes (with proper eye protection) because the lightweight rounds sting but do not penetrate the skin.

• Practical Uses: They are great for safe indoor garage shooting without the risk of breaking windows, or for humanely chasing nuisance crows or vermin out of your yard without causing them permanent harm.

• Platform Tech: Heavier airsoft rounds utilize backspin, or "hop-up", to float straight through the air for better accuracy, and they are typically fired from highly realistic, full-blowback gas or CO2 replica pistols. Most rifle Airsoft guns are AEG’s using a battery and spring setup which allows for easy semi and full auto operation.

• Worst For: These are entirely ineffective for pest control (extermination) or any scenario requiring deep penetration or high impact energy.

View fullsize

4.5mm Steel BBs: Fast-Action Shooting

Steel BBs are 4.5mm in diameter, which translates to a .177 caliber round ball. Weighing in at approximately 5.3 grains, they are much denser than Airsoft rounds.

• Best For: Steel BBs are fantastic for fast-action plinking, breaking glass bottles, and tearing up pop cans.

• Platform Features: These are often used in 1-to-1 replica blowback pistols with drop-out full size magazines, giving shooters an authentic firearm feel for tactical manipulation practice.

• The Dangers: Steel does not deform upon impact, meaning these BBs are highly prone to dangerous ricochets if you shoot at hard surfaces indoors or up close.

• Worst For: Steel BBs lack the blunt force for home defense and are unethical for pest control as trey are a bit under powered and generally not as accurate as similar pellet guns.

View fullsize

Lead Pellets (.177 and .22 Caliber): Precision and Pests

Unlike round BBs, pellets are designed to be fired through a rifled barrel. Common sizes include .177 caliber (4.5mm, weighing 5 to 10 grains) and the much heavier .22 caliber (5.5mm, weighing 12 to 16 grains).

• Best For: The soft lead engages the spiral grooves in a rifled barrel, providing unmatched precision and accuracy.

• Terminal Ballistics: Because lead is soft, it expands and flattens upon impact, transferring its heavy kinetic energy directly into the target.

• Practical Uses: This improved energy transfer makes pellets the ethical choice for small pest control.

• Worst For: Pellet platforms are rarely designed as rapid-fire action shooters; they typically utilize slower single-shot (bolt actions) or rotary magazines that can require a bit of trigger finger strength to shoot quickly.

View fullsize

Rubber Balls (.43, .50, and .68 Caliber): Less-Lethal Blunt Force

This category represents the heavy hitters, firing massive projectiles that range from soft sponge rubber to dense steel-core balls, dust balls, and pepper balls.

• The Power Factor: A .68 caliber home defense marker can produce upwards of 20-50 Joules (or roughly 15-35 foot-pounds) of energy with dedicated home defense styled Rubber Ball Guns.

• Best For: The .68 caliber and high-powered .50 caliber options are explicitly designed for less-lethal home defense.

• How They Work: Instead of penetrating, these massive projectiles dump incredible raw energy and blunt force directly onto the target, effectively stopping threats through extreme pain.

• Training Options: The smaller .43 caliber variants are frequently chambered in realistic blowback replica pistols, making them excellent for tactical and paintball-style force-on-force training.

At the end of the day, picking the right Airgun comes down to matching the ammunition mass and energy to your target. You can find all the gear discussed here, from Airsoft replicas to less-lethal launchers, at the Replica Airguns Canada and US stores. Make sure you are subscribed to our channels across Rumble, YouTube, Vimeo, Instagram, X and Facebook for more detailed reviews and field tests.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

Hey everybody, Michael here from Replica Airguns with another field test shooting video! Today, we finally got our hands on another A&K M1873R M-Lock Lever Action Airsoft Gas Rifle. The first one we received had an issue with a leaking valve that someone tried to fix with some goop, so I got a return item to demo instead. For this session, we are strictly focused on performance: seeing how this model handles when we actually put some rounds downrange. I am using .25 gram Airsoft BBs and filling it up with propane gas. We are going to put this gun through its paces, but right out of the gate, we're dealing with some quality control quirks. Also make sure to checkout my Table Top video for the A&K M1873R for details specifications and close up video.

Chronograph and Velocity Testing

Starting things off with the chrony test, I filled the gun up with propane. It's worth noting right away that preparing this gun is frustrating; you cannot fill the gun with gas while the front mock suppressor is attached. You have to take a coin, unscrew it for 30 to 60 seconds, fill the gas, and put it back on. After finally getting it loaded up, let's see how the M1373 R version performed:

• Shot 1: 340 FPS

• Shot 2: 320 FPS

• Shot 3: 335 FPS

• Shot 4: 328 FPS

• Shot 5: 337 FPS

• Shot 6: 335 FPS

View fullsize

As you can see, the numbers were fairly consistent, keeping us comfortably in the 320 to 340 FPS range with a 7 shot average of 331 FPS. It shoots right around where you want it to be for an Airsoft Rifle of this type, though you can hear the gas starting to run a bit low if you push too many rounds through it without topping it off.

Accuracy Downrange at 30 Feet

Next up, I stepped back to my standard 30-foot mark to see what kind of grouping the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle could pull off on a fresh paper target. I put about 10 or 11 rounds through it for this string. Because of the way it was hitting, I intentionally aimed towards the bottom of the target ring to compensate for it shooting high the way the red dot was sighted in.

Shooting this gun requires some effort. The trigger is honestly quite heavy for what is essentially a single-action pull, so you really have to crank it. Despite the heavy trigger, the end result was a fairly decent 2.5 to 3-inch grouping. As long as you know where to aim or have your sights dialed in, it's actually not a bad shooter downrange.

Shooting Feel and Quality Control Issues

The physical shooting experience is where this A&K replica really struggles, largely due to lacking quality control. Out of the box, a small retention spring meant to keep the loading port door closed, fell out of the breech area. Because of this, it misfeeds, and the BB stays in the bottom part of the breech unless you give the lever an intentional, forceful push to load it correctly.

The other major headache is the previously mentioned mock suppressor design. Having to take a tool or coin to remove it just to fill it up with gas makes no sense for field use. They really should have included an open-front mock suppressor or an extender piece so you can reach the valve easily without a teardown process every 20+ shots or so.

View fullsize

Final Thoughts

Ultimately, the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle is a very cool-looking modern lever action rifle, but I really wish it didn't have these out-of-the-box issues. Between the two models I looked at, both had problems, from leaking valves to a finicky loading door. The unnecessary 60-second hassle just to fill the gas tank holds it back from being a great plinker unless you simply do not install the mock suppressor. It definitely shoots well enough and hits good FPS numbers, but you'll have to deal with some frustrating design choices and quality control along the way.

Where to Buy

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US

Thanks for tuning in! Make sure to head over and follow the Replica Airguns channels on Rumble and Vimeo. We are uploading as much content as possible, and your support means the world to us!

We’ve got yet another box on the table today for our August Mystery Unboxing. It took a while to arrive, but it was absolutely worth the wait. We’re diving into four highly anticipated products across the BB, Pellet, and Airsoft categories.

Here is a quick first look at what’s hitting the review table soon!

View fullsize

Marksman Model 1018 .177 Caliber Air Pistol

First out of the box is the Marksman 1018. This is a very budget-friendly (around $50), 1911-inspired spring-actuated pistol. It features fiber-optic sights on the front and back, making it an excellent, quiet option for basement or backyard plinking. While it can technically shoot darts and bolts, we'll be sticking to BBs and pellets for our tests.

Basic Specifications:

• Action: Single-stroke spring piston

• Caliber: .177 Caliber (BBs and Pellets)

• Capacity: 18-shot internal BB reservoir

• Velocity: Up to 200 FPS

• Weight & Length: 1 lb / 9.0 inches

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

Next up is a beauty from Umarex, the Glock 17 Gen 5 MOS. If you love ultra-realistic replicas, this is it. It features a heavy full-metal slide spring, a recessed barrel, and classic white dot sights. The "MOS" means it comes ready with all the mounting plates you need to attach your favorite red dot sights. It runs on a full-size, drop-out 17-round metal magazine and utilizes a full blowback system for ultra realistic blowback operation.

Basic Specifications:

• Action: Semi-auto full blowback, single CO2 cartridge

• Caliber: 4.5mm (.177) steel BBs

• Capacity: 17-round drop-out metal magazine

• Velocity: Approximately 300 FPS

• Weight & Length: 1.5 lbs / 7.95 inches

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

I'm incredibly excited to finally do a proper field test on this one. This is a replacement for a previous model that had a leaky loading valve. This gas-operated, "Mares Leg" style lever-action rifle is heavily modernized. It features a gorgeous real wood stock, an enlarged lever loop, a Picatinny top rail, an M-LOK handguard for accessories, and a mock suppressor on the front.

Basic Specifications:

• Action: Gas Non-Blowback Lever Action (Green Gas)

• Caliber: 6mm Airsoft BBs

• Capacity: 25-round internal magazine

• Velocity: 360 - 390 FPS (with 0.20g BBs)

• Weight & Length: 3.7 lbs / 24.5 inches

View fullsize

Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle

Finally, we have an absolute powerhouse in a tiny package: the Specna Arms SA-E10 PDW. This is a super-compact AR-style AEG with a polymer-metal build and a telescopic stock. Specna Arms goes above and beyond with the box contents on this one. Along with the rifle, you get two S-MAG mid-cap magazines, an additional M90 drop-in spring to easily lower your FPS for indoor fields, a Deans adapter, and a vertical foregrip.

Basic Specifications:

• Action: Electric (AEG) with Pre-installed MOSFET

• Capacity: Includes two 125-round mid-cap S-MAG magazines

• Velocity: 375-390 FPS (Drops to ~310-320 FPS with included M90 spring)

• Length: Minimum 505 mm (approx. 19.8 inches)

• Inner Barrel: 160 mm precision 6.03mm barrel

Stay tuned to the Replica Airguns channel, as I'll be doing dedicated tabletop and field test shooting videos for all of these very soon.

View fullsize

In this Table Top Review, we're taking a detailed look at the ASG CZ P-10 C CO2 Blowback Airsoft Pistol. As always, this is a Table Top Review only, so there won't be any shooting in this video. However, a dedicated Field Test Shooting Video will be coming later to see how it performs in real-world use.

This is an ASG product, officially licensed by CZ, and it features authentic markings, including the 9x19 stamp. It's a modern, full-blowback airsoft replica that mirrors the real steel CZ P-10 C very closely. Manufactured in Taiwan and distributed by ASG, this model stands out with some excellent out-of-the-box features, making it a highly versatile and realistic option for airsoft shooters.

View fullsize

Specifications

• Caliber: 6mm Airsoft BB.

• Action: Semi-auto, full blowback.

• Power Source: Single 12g CO2 cartridge (Green Gas magazines are also available).

• Magazine Capacity: 22-round full metal drop-out magazine.

• Velocity: ~330 FPS (1.05 Joules) with .20g BBs.

• Weight: 1.63 lbs (730 g).

• Overall Length: 7.09 inches (195 mm).

• Construction: Metal slide, nylon/polymer frame.

• Barrel: 14mm CCW threaded outer barrel.

• Hop-Up: Adjustable (accessible via open ejection port).

• Optics Ready: Yes (optics plate pre-installed).

View fullsize

Build Quality & Design

The ASG CZ P-10 C delivers a solid mix of materials with its metal slide and nylon frame construction. The metal slide gives it a realistic, top-heavy weight and feel, while the nylon frame keeps the overall weight balanced at a manageable 1.63 pounds. The full metal 22-round magazine, which houses the 12g CO2 cartridge, adds substantial weight to the grip, giving the gun a very realistic presence in the hand.

Field stripping is incredibly simple and authentic to the real steel version—just pull down the two tabs and rack the slide forward to remove it. While the most of the frame components are mostly plastic, the heavy metal slide ensures durability where it counts.

View fullsize

Handling & Controls

This pistol is designed with ergonomics and modern handling in mind. It features mostly ambidextrous controls, including an ambidextrous slide catch and release. While the magazine release comes set up for right-handed shooters, it is completely reversible. The pistol includes a working trigger safety and comes with three interchangeable backstraps, allowing you to customize the grip size to perfectly fit your hand.

One of the standout design choices on this airgun is the hop-up adjustment. Instead of having to field strip the pistol to make adjustments, you can access the hop-up wheel directly through the open ejection port when the slide is locked back, a massive time-saver during gameplay.

View fullsize

Sights & Optics

Out of the box, the ASG CZ P-10 C is optics-ready and comes with an optics plate already installed on the slide. If you prefer to run standard iron sights, ASG includes a rear white-dot sight in the box that you can easily swap out by removing the plate. It also features a fixed white-dot front sight for quick target acquisition.

Additionally, the gun features a 14mm CCW threaded outer barrel right out of the box, hidden under a protective orange cap. This makes it instantly ready to accept a mock suppressor or a tracer unit once the cap is removed.

View fullsize

Performance Expectations

With a claimed velocity of around 330 FPS (1.05 Joules) using a 12g CO2 cartridge, it hits perfectly within standard indoor CQB limits while still offering enough power for outdoor play. Because it features full blowback operation paired with a fairly heavy metal slide, you can expect a very crisp, realistic recoil effect with every shot.

View fullsize

Pros

• Officially licensed by CZ with authentic 9x19 markings.

• Full blowback operation with a heavy metal slide for realistic recoil.

• Optics-ready out of the box with the plate pre-installed.

• 14mm CCW threaded outer barrel ready for a suppressor or tracer unit.

• Convenient hop-up adjustment dial accessible through the open ejection port (no field stripping required).

• Includes three interchangeable backstraps to customize grip size.

• Ambidextrous slide release and reversible magazine release.

• Simple and realistic field stripping process.

• Comes in a Black and Tan version

Cons

• Comes with an orange cap on the barrel, though it serves to protect the 14mm threads and can be removed.

• The standard rear sight is not installed out of the box (requires swapping the pre-installed optics plate).

• Internal trigger group components are mostly plastic.

View fullsize

Final Thoughts

The ASG CZ P-10 C CO2 Blowback Airsoft Pistol is a fantastic option for anyone looking for a modern, feature-rich sidearm. It bridges the gap perfectly between a realistic training tool and a highly capable Airsoft primary or secondary. The inclusion of an installed optics plate, a threaded barrel, and a hop-up that doesn't require field stripping shows that ASG really thought about the end-user when designing this replica. I'm looking forward to getting this out for the field test to see how that heavy slide cycles and this Airsoft Pistol tests out on the Chrony and Paper Target.

• Buy the ASG CZ P-10C CO2 Blowback Airsoft Pistol in Canada

• Buy ASG Airguns in the US

View fullsize

Today we are staying dry inside out of the rain and stepping into the indoor range for a practical field test and penetration review of the Umarex T4E TP50 Less Lethal Pistol. If you are looking for a legal and unregulated deterrent for home defense that packs a surprising punch, you’ll want to see how this .50 caliber paintball-style pistol performs straight out of the box.

The Test Setup

For this test, we are keeping the TP50 entirely stock. There are no valve modifications or aftermarket upgrades here, this is exactly what you get when you open the box.

We are shooting from a distance of approximately 30 feet. Here are the specs on the ammunition and power for today's test:

• Ammunition: .50 caliber rubber balls with a steel core. These are slightly less dense than nylon but heavier than standard rubber due to the steel center. (Just under 3 grams)

• Power Output: Pushing roughly 12 to 13 Joules.

• Velocity: Traveling at just over 300 feet per second (fps).

Our targets for today include a solid piece of 3-ply wood, a metal trash can lid and some thick plastic bucket lids to see exactly what kind of damage this less-lethal option can do.

View fullsize

Target 1: The 3-Ply Wood Test

First up was the 3-ply wood. Given the velocity and the dense nature of the target, I wasn't expecting the Umarex T4E TP50 Less Lethal Pistol to blow right through the wood.

After putting a couple of rounds downrange, the results were impressive. While it didn't fully penetrate the 3-ply, it hit with a resounding smack and left significant, visible damage on the surface. Honestly, this gun shoots much hotter than I remembered. It is absolutely no slouch.

Target 2: The Galvanized Steel Garbage Can Lid

second up, I aimed at the galvanized steel garbage can lid. Going into this stage, I expected the .50 caliber round to simply smack the surface and fall straight to the ground without penetrating, which is exactly what happened.

However, even though it didn't punch a hole through the metal, the sheer force of the impact was undeniable. The round hit the steel hard, proving that even against dense, unforgiving surfaces, the TP50 is pumping out some serious kinetic energy.

Target 3: The Plastic Barrel Lids

Next, we moved on to the plastic barrel lids. I expected the TP50 to punch through a single lid, so we taped two of them together to see how far it could push.

This is where the Umarex T4E TP50 Less Lethal Pistol really showed its teeth. When I fired, the recoil actually threw my hand back, this gun has genuine kick to it, especially when firing these heavier steel-core rounds.

It does seem to shoot a bit on the high side at 30 feet, so I ended up hitting the target near the top edge. Even so, the steel-core rubber ball blew cleanly through the first plastic lid and struck the second. That level of penetration from a stock, 12-Joule less-lethal pistol is incredibly impressive.

Final Thoughts

The Umarex T4E TP50 is a powerhouse for an out-of-the-box, unregulated less-lethal pistol. While it's designed as a deterrent rather than a lethal option, the 12 to 13 Joules of energy paired with steel-core rubber balls provides more than enough kick to send a very clear message to anyone who shouldn't be up to no good and on your property.

If you are looking for a highly capable less-lethal pistol that sits well within Canada's unregulated legal limits, the TP50 delivers.

If you are interested in picking one up for yourself, or you want to check out our other less-lethal options, head over to replicaairguns.ca in Canada or replicaairguns.us in the US.

• Buy the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol in Canada

• Buy Paintball Guns in the US

View fullsize

The G&G ESG B10 2.0 continues to offer a truly unique experience for those looking for a bullpup-style gas Airsoft Shotgun. In this field test review for the RA Reviews channel, I tested the shotgun to see how it performs in terms of velocity and real-world accuracy at close range. Having already covered the specifications in the tabletop video, this test focuses on its live-fire performance using the 5-round burst mode. The ESG B10 2.0 has the ability to shoot either 5 or 10 rounds per trigger pull, and getting it on the range really shows off what this platform is meant to do. Checkout my Table. Top Review for details, specifications and more close up video.

For ammunition and setup, I used standard green gas and .25g airsoft BBs. Velocity testing through the chronograph produced some solid and expected numbers. The first shot registered a high of 238 FPS, which is very common on a fresh gas fill. After the gun settled down, it delivered consistent readings of 207 FPS, 206 FPS, and 209 FPS, averaging right around 215 FPS. When you are firing five .25g BBs simultaneously, that combined energy is more than enough for close-quarters engagements.

Accuracy testing was performed from 30 feet downrange using the 105-round mid-cap magazine. Since I didn't have any sights mounted on the G&G ESG B-10 2.0 Gas Airsoft Shotgun for this test, I relied on winging it by aiming slightly to the left to compensate for the spread. The shotgun fired reliably through the entire magazine, giving about 15 or so pulls of the trigger in the 5-round burst mode with a few 10 round burst shots added in. You will immediately know when you are out of ammunition or gas because the gun makes a noticeably different, very quiet sound when firing empty, which is a helpful audible cue during a match.

View fullsize

Overall, the G&G ESG B10 2.0 is a lot of fun and functions exactly as a close-quarters BB sprayer should. The trigger pull is on the heavier side, but it feels good and adds to the robust handling of the gun. The bullpup design makes it incredibly maneuverable for indoor CQB fields. While this review captures the core performance of the shotgun based on this specific field test, it's just a fragment of what this platform can do. You might consider exploring different optic setups on the top rail, experimenting with M-LOK foregrips, or even looking into HPA setups to unlock different aspects of its performance and allow for new play styles.

In terms of how many rounds actually hit the target? Well it’s hard to say, lots missed for sure! That’s not really the point of this type of close quarters shooter, as you want rounds to speed out and hit as many people as possible, so I would say the G&G ESG B-10 2.0 Gas Airsoft Shotgun worked as intended here.

You can find the G&G ESG B10 2.0 Gas Airsoft Shotgun, along with plenty of extra magazines, gas, and BBs, at:

• Buy the G&G ESG B-10 2.0 Gas Airsoft Shotgun in Canada

• BuyAirsoft Rifles in the US

Be sure to check out the video version of this review, and you can follow the content on YouTube, Vimeo, Facebook, Instagram, and Twitter!

View fullsize

The Umarex T4E TP50 Gen 2 continues to impress as one of the more powerful and practical compact less-lethal pistols currently available. In this field test review, I tested the all-black version using .50 caliber rubber-steel core rounds to see how it performs in terms of velocity, energy, and real-world accuracy. The black version is essentially the same as the orange-marked variant, just marketed a bit differently, with a more tactical appearance that may appeal to those looking for a serious training or home defense-style option.

For ammunition, I used the steel-core rubber balls rather than standard solid rubber rounds. These projectiles are slightly heavier and seem to carry noticeably more energy downrange without sacrificing too much velocity. In my opinion, they are probably some of the best ammunition choices for these types of pistols if maximum impact energy is your goal.

Velocity testing through the chronograph produced some very impressive numbers. The TP50 Gen 2 delivered readings of 319 FPS, 304 FPS, 310 FPS, 300 FPS, and 308 FPS, averaging just over 308 feet per second. With the steel-core rubber rounds weighing approximately 2.7 grams, the pistol produced roughly 12-13 Joules of muzzle energy using the Steel Core Rubber Balls but would have been closer the projected 15 Joules with all Rubber Balls, which is extremely respectable for a compact CO2-powered .50 caliber launcher. You can really hear and feel the power when firing this pistol, and it even generates noticeable recoil-like kick during shooting.

View fullsize

Accuracy testing was performed from 30 feet downrange using the six-round internal magazine. Paintball-style projectiles are naturally less precise than pellets or BBs due to their softer construction, surface ridges, and aerodynamic inconsistencies, but the Umarex T4E TP50 Gen 2 still delivered surprisingly solid grouping performance. After adjusting my aim slightly low due to the pistol shooting a little high initially, the remaining shots grouped well into the center portion of the target and produced clean, sharp holes through the paper target with about a 3 inch grouping.

In practical terms, this pistol clearly delivers enough impact energy to strongly discourage an attacker or aggressive threat. The steel-core rubber rounds hit extremely hard, especially considering the combination of high velocity and projectile mass. While heavy clothing would certainly absorb some impact, anyone wearing lighter clothing would absolutely feel these rounds. The all-black appearance also adds to the realistic tactical styling, which alone could act as a deterrent before a shot is ever fired.

Overall, the Umarex T4E TP50 Gen 2 proved to be accurate enough for close-range defensive-style use, delivered excellent power, and offered reliable operation throughout testing. The trigger feels good, the pistol handles nicely, and the performance with steel-core rubber ammunition was impressive across the board. For anyone looking for a compact CO2-powered less-lethal launcher with strong energy output and solid build quality, the TP50 Gen 2 is definitely worth considering.

You can find the Umarex T4E TP50 Gen 2 and other Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and accessories at:

• Buy the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol in Canada

• Buy Paintball Guns in the US

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

View fullsize

In this table top review, we’re taking a look at the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol, part of Umarex’s T4E (Training for Engagement) lineup. This version is marketed more as a tactical training pistol, while its nearly identical counterpart, the HDP50, is positioned toward home defense.

At first glance, the TP50 and HDP50 look almost identical. The main visual difference is that the TP50 comes in an all-black finish, while the HDP50 features an orange slide. Beyond that, the functionality, performance, and specs are essentially the same.

Key Features and Specifications

• Manufacturer: Umarex

• Model: T4E TP50 Gen 2

• Caliber: .50 caliber

• Power Source: 12g CO2 (quick piercing system)

• Action: Semi-auto, double action trigger

• Magazine Capacity: 6 rounds (internal inline magazine)

• Velocity: Rated up to 465 FPS

• Energy: Claimed 11 joules (can be higher depending on ammo)

• Barrel Length: ~4 inches

• Overall Length: ~8 inches

• Weight: ~1.5 lbs (0.7 kg)

• Construction: Polymer frame and slide with metal internals and barrel

• Safety: Integrated trigger safety

• Rail: Under-barrel Picatinny rail

• Sights: Fiber optic front and rear

View fullsize

Overview and First Impressions

The TP50 Gen 2 is a compact, .50 caliber paintball-style pistol designed for training, recreational shooting, and less-lethal applications. It has a solid feel in the hand, not too heavy, not too light, and resembles a full-size handgun profile, similar in size to a large-frame pistol.

Despite its polymer exterior, the internal components that matter, especially around the CO2 system—are metal, giving it durability where needed.

CO2 System (Quick Piercing Feature)

One of the standout features is the quick piercing CO2 system:

• Insert the CO2 cartridge (butt-first)

• Tighten the cap until snug

• When ready to use, give the bottom a firm “whack”

• A pin pops out on the back where you can see it to indicate the system is pressurized

This allows you to keep the pistol loaded but not activated, which is useful for storage or readiness situations.

View fullsize

Ammo Compatibility

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol supports a wide range of .50 caliber ammunition, including:

• Rubber balls

• Powder balls

• Paintballs

• Steel/rubber hybrid balls

• Pepper balls (limited availability in Canada)

Performance varies significantly depending on the weight of the projectile:

• Lighter rubber balls: ~450 FPS / ~13–15 joules

• Heavier projectiles: lower energy (down to ~7–11 joules)

View fullsize

What’s Included

• TP50 Gen 2 pistol

• Two tubes of 10 rounds each (powder + rubber balls)

• Barrel cleaning squeegee

• Instruction manual

• Cardboard packaging (blue “tactical pistol” branding)

View fullsize

Walkaround Highlights

• Fiber optic sights make target acquisition easy in various lighting conditions

• Textured grip and slide for solid handling

• Metal trigger with integrated safety

• Wide open barrel design

• Picatinny rail for adding lights or lasers

• Clear “Strike” marking for CO2 activation point

Overall, it’s a clean, functional design with a tactical look, especially in the all-black version.

View fullsize

Pros

• Compact size compared to other .50 cal pistols

• Wide variety of compatible ammo types

• Quick piercing CO2 system (very practical)

• Good power for its size (~11–15 joules range)

• Fiber optic sights improve usability

• Picatinny rail for accessories

• Realistic all-black tactical appearance

Cons

• Only 6-round capacity before reload

• Limited shots per CO2 (~3–4 reloads)

• Internal magazine (no quick mag swaps)

• Pepper ball ammo difficult to source in Canada

• Efficiency trades off for higher power

TP50 vs HDP50 (Quick Comparison)

• TP50: All black, marketed as tactical training

• HDP50: Orange slide, marketed for home defense

• Performance: Essentially identical

View fullsize

This difference is largely cosmetic and marketing-driven, so choosing between them comes down to preference and intended use.

Final Thoughts

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol is a solid, compact .50 caliber CO2 pistol that delivers respectable power in a manageable platform. It’s not designed for high-capacity shooting or efficiency, but rather for impact, simplicity, and versatility in ammo choice.

If you’re looking for a less-lethal option or a training pistol with realistic handling and solid performance, the TP50 fits that role well, especially if you prefer the more discreet all-black tactical look.

Where to Buy

• 🇨🇦 Buy the T4E TP50 in Canada: ReplicaAirguns.ca

• 🇨🇦 Buy the T4E HDP50 in Canada: ReplicaAirguns.ca

View fullsize

In this April 2026 unboxing, there’s a solid mix of power, realism, and variety straight out of the box. Even before opening it up, the size and weight of the package hinted that this wasn’t going to be a light or basic shipment. As usual, this is more of a first look and overview rather than a deep dive, with full tabletop and field test reviews coming later.

CenterPoint AT400 Compound Crossbow Kit (400 FPS)

The first item out of the box is easily the most substantial: an AT400 compound crossbow kit. This is not one of the smaller, backyard-friendly crossbows—it’s a full-sized, high-powered unit designed for serious use.

• Velocity: Rated around 400 feet per second

• Energy: Approximately 142 ft-lbs

• Features:

  • Detachable silent crank system for easier cocking

  • Picatinny rail for mounting optics or accessories

  • Full kit setup with multiple components included

This level of power puts it well into small-to-medium game hunting territory, making it more than just a recreational piece. Because of its size and power, testing it indoors isn’t really practical, so this one will likely get a detailed tabletop breakdown rather than a traditional shooting demo.

View fullsize

Umarex T4E TP50 Gen 2 (.50 Cal Tactical Pistol)

Next up is the Umarex T4E TP50 Gen 2, this time in the all-black tactical version rather than the more recognizable orange training model.

• Caliber: .50 caliber

• Velocity: Up to 465 FPS

• Ammo: Rubber balls (included in the box)

• System: CO2 powered with quick-pierce activation

This version stands out for a couple of reasons. First, the higher velocity suggests noticeably more energy compared to earlier or training-focused versions. Second, the all-black design gives it a much more realistic look, closer to a traditional firearm aesthetic.

Functionally, it uses a spring-fed internal magazine and a preloaded CO2 system, allowing you to keep it ready without gas leakage. When needed, a quick strike activates the CO2, making it immediately usable.

Based on typical .50 cal projectile weights and that velocity, this likely lands somewhere in the mid-to-high teens or possibly around 20 ft-lbs of energy, though exact numbers will be confirmed during testing.

View fullsize

E&L AKS-74N AEG Airsoft Rifle (Legends Series)

The final item in the box is a standout for realism: the E&L AKS-74N AEG airsoft rifle, branded under the “Legends / Legendary Perfection” line.

This is clearly built to replicate the real AK platform as closely as possible.

• Construction:

  • Real wood stock

  • Stamped steel receiver and metal components

  • Folding stock (magnetic lock)

• Operation:

  • AEG (Automatic Electric Gun)

  • Semi and full-auto firing modes

  • Adjustable rear sight (elevation)

• Extras:

  • Deans connector compatibility

  • Included specs sheet with velocity in m/s

The weight is immediately noticeable, estimated around 7–8 pounds, which adds to the realism. The combination of real wood furniture and steel construction gives it a very authentic feel compared to lighter, polymer-heavy Airsoft rifles.

The included magazine is polymer, but it should be compatible with standard AK-style AEG mags, meaning upgrades or swaps are likely straightforward.

Final Thoughts

This unboxing delivers a strong mix across three very different categories:

• High-power archery platform (AT400 crossbow)

• Compact CO2-powered .50 cal pistol (TP50 Gen 2)

• Full-metal, real wood AEG rifle (E&L AKS-74N)

Each item targets a different type of user, from tactical training and backyard use to collectors and realism-focused Airsoft enthusiasts.

As always, this is just the first look. Full tabletop reviews, comparisons, and field tests will break down real-world performance, usability, and value.

For availability and full write-ups, check:

• ReplicaAirguns.ca (Canada)

• ReplicaAirguns.us (USA)

• ReplicaAirguns.com (reviews and videos)

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.

Today we’re looking at the A&K M1873R (the R version). There are a few different versions of this rifle in the lineup (some more compact, some more full-length), and the manual actually shows the variations so watch the video where I point that out.

This is a Table Top Review only, so we’re focusing on specs, details, and a walk-around. I was hoping to follow this up quickly with a Shooting / Field Test Video, but my sample has an issue: it’s leaking gas when I try to fill it (I tested with propane/green gas). I’ll need to sort that out first (repair or replacement), so the field test will have to wait until that’s resolved.

Here some links where you can buy the A&K M1873R in our Canada Replica Airguns and US Replica Airguns Stores

View fullsize

Specifications

• Manufactured By: A&K – Made in China

• Type: Gas-powered airsoft lever action rifle (non-blowback)

• Ammunition: 6mm plastic airsoft BBs

• Power Source: Green gas / propane (internal gas reservoir)

• Action: Lever action / manual cycle (one shot per lever cycle)

• Capacity: 25-round internal magazine (side loading gate)

• Velocity: Approx. 350–400 FPS with 0.20g BBs (temperature/BB weight dependent)

• Hop-Up: Adjustable hop-up system

• Build / Materials:

  • Real wood stock

  • Metal receiver and barrel assembly

  • M-LOK handguard (tactical “modern western” styling)

  • Top Picatinny rail (optics ready)

  • Brass butt plate

• Controls / Features:

  • Enlarged lever loop (glove-friendly)

  • Integrated lanyard ring / sling hoop

• Weight: 4.8 lbs (2.18 kg)

• Overall Length: 27.2 inches (69 cm)

• Barrel Length: 8 inches (20.3 cm)

In the Box

• A&K M1873R rifle

• Mock suppressor (cosmetic)

• Speed loader (you’ll want this for loading the internal magazine)

• Tools / Allen keys

• Small bag of airsoft BBs

• Simple 1-page manual

View fullsize

Manual Notes: Different Versions

The manual shows several versions of this lever action platform. Some are more compact and some are more traditional full-length lever rifles. There’s also a version that appears to run without the longer front barrel extension setup, which, honestly, is the version I’d personally lean toward since the included mock suppressor is mostly cosmetic.

Walk Around

This is a really sharp-looking rifle, it has that classic lever gun vibe thanks to the real wood stock and brass butt plate, but then it mixes in a modern tactical look with the M-LOK hand-guard and top Picatinny rail.

A few key points when handling it:

• No sights included: there are no iron sights on this rifle, so you’ll want to add your own optic (red dot, scope, or rail-mounted irons).

• M-LOK handguard + top rail: lots of freedom to build the look you want, keep it clean, or “tactical western” it up with accessories.

• Internal mag / side loading gate: loads like a real lever gun, through the side. The external profile stays clean (no big mag hanging out).

• Enlarged lever loop: easier to run with gloves or bigger hands, and it just looks right on this style of rifle.

• Sling / carry: it includes a metal lanyard ring / sling hoop, so carrying it is easy if you want it strapped while moving around.

View fullsize

Mock Suppressor and Gas Fill

The included “suppressor” is mainly for looks. It does have an orange front, and it doesn’t function as a suppressor (it’s not extending the inner barrel either).

Important practical detail: you’ll need to remove the mock suppressor to access the gas fill valve, which means you’ll want to keep the included tool (or something similar like a washer/coin that fits) with you.

Issue With My Sample: Leaking Gas

My review sample is leaking at the fill area. It looks like someone may have tried to seal it (there appears to be silicone or residue), and there are a few scratches that make me suspect this unit could have been a return. I tried tightening it, but it still leaks and it may be stripped.

This is not what you should expect out of a normal new unit, but I want to mention it because it’s the reason I’m holding off on the field test until it’s fixed.

View fullsize

Pros

• A lever action gas Airsoft rifle is just plain fun (and there aren’t tons of these around)

• Classic look with real wood + brass butt plate, but still has modern utility with M-LOK up front

• Feels solid in the hands (doesn’t feel cheap)

• Top Picatinny rail makes optics easy (and you’ll want optics since there are no sights)

• 25-round internal magazine keeps the outside profile clean

• Enlarged lever loop is great for gloves or cold-weather play

• Lanyard ring / sling hoop makes it easy to carry

• Speed loader makes loading fast once you get the hang of it

• You can run it more compact by skipping the mock suppressor (it’s optional)

Cons

• The internal 25-round magazine is awkward to load without the speed loader, don’t lose it

• Green gas performance is temperature sensitive, which can affect consistency in colder weather

• Not a fast follow-up shooter, you must work the lever for every shot (part of the charm, but it’s a limitation)

• You’ll need to add your own sights/optic (none included)

• The included mock suppressor must be removed to fill gas, which adds a little extra handling

View fullsize

Final Thoughts

The A&K M1873R is a really cool “modern western” mashup, classic lever action styling with real wood and brass, but with M-LOK and a top rail so you can build it out however you want. Lever guns force you to slow down and actually enjoy the shooting experience, and that’s a big part of why they’re so popular (even outside of Airsoft).

Once I get the leak issue sorted on my sample, I definitely want to do the field test, because this is exactly the kind of unique platform that deserves to be shot and evaluated properly. On the table, it looks great, feels solid, and offers a lot of customization potential, you just have to go in knowing it’s lever-action manual cycling, it uses green gas/propane (so temperature matters), and you’ll need to add your own optic since there are no sights included.

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in Canada

• Buy the A&K M1873R M-Lock Lever Action Airsoft Gas Rifle in the US

In this Table Top Review, we’re taking a detailed look at the G&G ESG B-10 2.0 Gas Airsoft Shotgun. This is a very unique Airsoft platform, as it’s fully gas powered—no spring, no AEG system, and no blowback. Just straight gas operation.

Gas-powered Airsoft shotguns are fairly rare, and this one stands out even more because it’s essentially a semi-automatic gas shotgun capable of firing five or ten BBs per trigger pull. That makes it a serious close-quarters option and something I’m genuinely excited to field test.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will be coming later, where we’ll see how it performs in real-world use.

Links to purchase this product in Canada and the US will be included in the video description.

View fullsize

Specifications:

• Manufacturer / Distributor: G&G

• Made In: Taiwan

• Power Source: Green Gas

• Ammunition: 6mm Airsoft BBs

• Action: Gas powered, semi-auto

• Burst Modes: 5-shot or 10-shot (selectable)

• Trigger: Double-action only

• Construction: Metal & polymer

• Weight: 5.6 lbs (2.52 kg)

• Overall Length: 18.39 inches (46.7 cm)

• Inner Barrel Length: 12 inches (30.5 cm)

• Magazine: 105-round AR-style mid-cap

• Claimed Velocity:

  • ~235 FPS in 5-shot mode

  • Lower in 10-shot mode

• Rails: Picatinny rails on top and sides

• Selector: Ambidextrous

• Sling Mounts: Front and rear QD points

While the FPS may seem low, it’s important to remember that five or ten BBs are being fired simultaneously, which requires significantly more gas per shot.

In the Box:

• G&G ESG B-10 2.0 Gas Airsoft Shotgun

• 105-round AR-style mid-cap magazine

• Product brochure

• (Manual not present in this package, but typically included or available online)

The shotgun comes packaged in a large box with a sleeve that differentiates the 2.0 version from the original B-10.

Design & Layout:

The ESG B-10 2.0 uses a bullpup layout, which keeps the overall length short while still allowing for a reasonably long inner barrel. Despite its compact size, the gun feels very solid and heavy, likely due to its internal gas system and metal components.

Notable design features include:

• Picatinny rails on the top and both sides

• Ambidextrous selector switch for 5- or 10-shot bursts

• Ambidextrous magazine release

• QD sling mounts front and rear

• Non-orange flash hider

• Polymer butt plate with internal gas reservoir

Because of the low rail height relative to the grip, you’ll almost certainly want to install some form of optic or sight to get a usable sight picture.

View fullsize

Controls & Operation:

The selector switch serves as both the safety and burst selector, allowing you to choose between five or ten BBs per trigger pull. It’s ambidextrous and easy to reach from either side.

One thing worth noting is how the selector cycles internally. There can be a one-shot delay when switching between modes, meaning the first pull after switching may still fire the previous burst count before changing over.

The trigger is double-action only, as there’s no blowback system. While heavier than a single-action trigger, it’s not excessive—especially considering the amount of ammunition being fired with each pull.

View fullsize

Magazine Compatibility:

The ESG B-10 2.0 uses standard AR/M4-style Airsoft magazines, including mid-caps and high-caps. It ships with a 105-round mid-cap, but you can easily use other compatible magazines from your collection.

The magazine locks in securely but does require a firm push to seat properly.

Gas System:

The gas reservoir is housed in the stock and holds a substantial amount of gas. Based on initial handling and other reviewers feedback, you should be able to fire multiple magazines before needing to refill, despite the high BB output per shot.

This is something we’ll fully confirm in the upcoming field test.

View fullsize

Pros:

• Unique gas-powered semi-auto shotgun design

• Fires 5 or 10 BBs per trigger pull

• Strong metal construction with excellent weight and balance

• Compact bullpup layout for close-quarters use

• Compatible with standard AR/M4 Airsoft magazines

• Efficient gas system despite high BB output

• Multiple rail options for optics, lasers, and accessories

• Sling-ready with front and rear QD mounts

• No orange tip, preserving realistic appearance

• High-quality G&G build at a reasonable price point

Cons:

• A sight or optic is essentially mandatory for proper aiming

• Double-action trigger is heavier than single-action designs

• Higher price compared to common AR-style AEGs

• No hop-up adjustment (typical for Airsoft shotguns)

View fullsize

Final Thoughts:

The G&G ESG B-10 2.0 Gas Airsoft Shotgun is a standout platform in the Airsoft world. Its ability to fire massive bursts of BBs with each trigger pull makes it an ideal close-quarters and room-clearing tool, while the bullpup design keeps it compact and maneuverable.

If you’re looking for something different from the usual AEG rifles, this gas shotgun offers a lot of fun, solid performance potential, and serious intimidation factor.

A full shooting and field test video is coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/compact-bullpup-esg-b-10-20-airsoft-rifle

🇺🇸 United States:
https://www.replicaairguns.us

View fullsize

More Reviews & Articles:

Visit our blog for written reviews, photos, and additional information:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

View fullsize

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

View fullsize

Specifications:

• Manufacturer: KJ Works

• Made In: Taiwan

• Power Source: 12g CO2

• Ammunition: 6mm Airsoft BBs

• Action: Semi-auto, full blowback

• Trigger: Single-action, skeletonized, adjustable (1911-style)

• Magazine: Full-size dropout metal magazine, 25-round capacity

• Weight: 1.96 lbs (890 g)

• Overall Length: 9.84 inches (250 mm)

• Inner Barrel Length: 4.25 inches (108 mm)

• Claimed Velocity: 366+ FPS

• Hop-Up: Adjustable

• Rail: Under-barrel Picatinny rail

• Sights: Fiber-optic front and rear

• Safety: Ambidextrous

• Magazine Release: Reversible

• Threaded Barrel: Inner and outer threading

• Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

View fullsize

In the Box:

• KP-19S CO2 Blowback Airsoft Pistol

• Full-size metal CO2 magazine

• Inner barrel extension

• Allen keys

• Small bag of Airsoft BBs

• Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

• Same frame, grip, slide profile, trigger guard

• Same skeletonized trigger and hammer

• Same magazine compatibility

View fullsize

Key Differences

• KP-19 (Non-S):

  • Flared magwell

  • Compensator

  • Removable rear plate for mounting a red dot

  • More competition-oriented configuration

• KP-19S:

  • No flared magwell (cleaner, more streamlined look)

  • Fixed rear sight

  • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

• Slide cutouts on the top and sides

• CNC-style gold/brass-colored fluted barrel visible through the slide

• Fiber-optic sights that are extremely easy to pick up

• Ambidextrous safety

• Reversible magazine release

• Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

View fullsize

Field Strip:

Field stripping follows a classic 1911 takedown:

1. Align the slide notch

2. Push out the takedown pin

3. Remove the slide assembly

Once opened, you gain easy access to:

• Inner barrel

• Recoil spring

• Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

View fullsize

Pros:

• High metal content with excellent weight and balance

• Strong, realistic full blowback action

• Excellent fit and finish typical of KJ Works pistols

• High-capacity 25-round metal magazine

• CO2 or gas compatibility (with appropriate magazines)

• Dual threaded barrel for accessories and extensions

• Bright fiber-optic sights (easy to acquire on any background)

• Short, light, adjustable 1911-style trigger

• Ambidextrous safety and reversible mag release

• Easy field stripping and hop-up access

Cons:

• Grip is wide and may not suit shooters with smaller hands

• Higher price point compared to similar KWC 1911 models

• Rear sight is not adjustable and does not accept a red-dot plate

  • Optics would need to be rail-mounted from underneath

View fullsize

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

View fullsize

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine