G&G GS-801 CO2 Blowback Airsoft Pistol Table Top Review

No Comments

Type: Airsoft pistol.



Materials: Mostly metal construction with a few plastic parts.

Weight: 1.64 pounds (742 grams)

Barrel: 4 inches, metal non-rifled.

Propulsion: CO2 x 1.

Action: Semi auto blowback, single action only.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 14 round magazine.

FPS: 400+

Trigger Pull: The trigger pull on the G&G GS-801 CO2 Blowback Airsoft Pistol is kind of different, it is single action only since the blowback action cocks the hammer back with each shot. There is a fair amount of take up with next to no resistance followed by the release point which seems kind of heavy after the soft take-up section, you need to keep applying pressure and then with no real movement it will just suddenly release so it's kind of hard to predict without practice. During the take-up portion of the trigger pull, the laser sight will automatically turn on if you have the laser in the active position.

Accuracy: This is somewhat yet to be determined in my upcoming Field Test Shooting portion of this review but I am looking forward to testing out the laser sight to see if it will help to get nice tight groupings? I will put a link in here when I have completed my Shooting Field Test review.

Build Quality: This is an almost all metal air gun with good fit and finish and a nice hefty to it since it is not large in the hand. The only real plastic parts are the grips, laser and CO2 tab, even the drop out Airsoft BB only stick magazine is all metal. The finish seems to be wearing really well and not rubbing off on the high points at all which is nice to see.

Realism: The G&G GS-801 CO2 Blowback Airsoft Pistol is not a replica of any manufactured gun that I know of, it does have a PPK or Makarov look to it even though it is larger than both semi auto pistols. I do like the open ejection port, true semi auto blowback action and working slide catch release.

Purchased From: The Replica Airguns Store.


  • Lots of metal and good overall weight for it's size.
  • Blowback operation (enough to give it some shot feedback and also cocks the hammer for easy single action trigger pull).
  • Should have a decent fps for a blowback Airsoft pistol.
  • Fully adjustable laser sight built into the pistol rail.
  • Fit and finish is very nice.
  • Magazine is all metal.
  • Rain for accessories.
  • Open ejection port and working slide catch
  • Nice and compact, has a sleek profile.


  • Stick mag ejection is a bit clumsy.
  • Slightly exposed plastic CO2 tab.
  • Trigger take-up is a bit long and the release is kind of spongy.


The G&G GS-801 CO2 Blowback Airsoft Pistol is a real nice solid little gun, It has lots going for it; The pistol is pretty much all metal including the frame, it has true blowback single action firing, a built in laser with trigger activation, you can field strip it, it has an open ejection port with working slide catch and the size and weight are perfect for an Airsoft backup sidearm. I am really looking forward to my upcoming Field tests Shooting review, and have high hopes this high value Airsoft pistol will perform very well for me.

My YouTube Video Review for the G&G GS-801 CO2 Blowback Airsoft Pistol:

6mm, Airsoft, Blowback, CO2, Pistol, Review, Semi Auto, YouTube Video G&G, GS-801