Here is video four in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this fourth Full Auto Fun video, I retest the Barra 400e 4.5mm BB AEG Full Auto BB Rifle in full auto this time, and try a bit of a different camera angle approach with my HoverAir Drone Camera switching it to follow mode as it doesn’t stop recording so easily in this mode. And as expected, it worked a lot better for me with this setup and continued recording the entire video. I also recoded using my Meta Glasses to get the first person view and like the other videos I placed my Insta360 X4 camera on the barrel again to get some cool up front gun angle shots. I think this setup works well and will probably use it for future Full Auto Fun Videos where I am running around the yard shooting stuff. Maybe there will be a couple more bonus guns in this years Full Auto Fun Series? No promises!
Here is video two in my series of Full Auto Fun videos I make each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this second Full Auto Fun video I test out the classic KWA Mini UZI Blowback CO2 4.5mm BB Machine Gun, at least with this video I did actually shoot in full auto but the video did not go without a few hiccups as my HoverAir Drone decided I was stopping for too long to take my shots and turned itself off a couple of times. And my Meta Glasses decided to get chunky on me and lower their frame rate down to a rather hard to watch frame per second. I did eventually make it though this video but it cold have gone better. No I am not redoing this one as it was shot in Full Auto this time which is what I promised. I can not promise all my tech gear will cooperate exactly s expected but I was able to get some decent footage overall if you can ignore the choppy video for the Meta Glasses for part of the video.
I try to make at least one series of Full Auto Fun video each summer where I pick a few Full Auto Airguns and record some fun outside shooting with them. In this years Full Auto Fun Video series I do a bit of a walk around on my property and shoot a bunch of water filled pop cans. Maybe this doesn’t sound super exciting but I do use some really creative camera angles to capture it all which makes it lot more interesting to watch for sure!
In this first Full Auto Fun video I start with the Barra 400e 4.5mm BB AEG Full Auto BB Rifle, but in the all the camera and audio setup confusion, I forgot to put it in Full Auto (getting old), so this is really not a Full Auto Fun Video, it was still fun and I hope you enjoy it anyway. The other videos in this Full Auto Fun Series are for sure in Full Auto and I will be taking out the Barra 400e and give it another go in Full Auto this time so stay posted for the true Full Auto Fun Video for the Barra 400e shortly!
In this Field Test Shooting Video, I test out the Specna Arms Core SA-J73 AEG Airsoft Rifle in my Indoor Replica Airguns Sea Can Shotgun Range to see what the velocity/fps is and what the accuracy is like shooting .20 gram Airsoft BB’s through my Chronograph. I shoot in both semi and full auto at a paper target setup 30 feet down range. If you are more interested in information like details and specifications for the Specna Arms Core SA-J73 AEG Airsoft Rifle, then make sure to watch my Table Top Video I already made that also includes some nice close up video for you to check out…
First up I loaded up a mag of .20 gram Airsoft BB’s and proceeded to shoot 5 rounds through my Chronograph to get a baseline average. Specna Arms claims around 370-380 fps using the preinstalled internal spring setup. I averaged 382 fps with my slowest shot recording 379 fps and my fastest shot hitting 383 fps. All of them really close in terms of velocity and right on the mark of the claimed 370-380 fps using .20 gram Airsoft BB’s.
With the Velocity Test in the bag, I moved on to my Accuracy Test for the Specna Arms Core SA-J73 AEG Airsoft Rifle where I first shot 10 rounds in semi auto to see how tight of a grouping I could get, and then I also finished up the rest of the partially full magazine in full auto to see if that grouping opened up a bit with a lot more rounds and a bit of full auto rocking around. For my 10 shot semi auto grouping I did get around a 1 to 1.5 inch spread, and notably all 10 shots hit the bullseye with no sight adjustments out of the box. Unleashing the Specna Arms Core SA-J73 in full auto, the group did spread out just a little bit to around 3 inches or so, but again right on top of the bullseye for the most part. Very impressive results for sure!
Overall I am super impressed with the Specna Arms Core SA-J73 AEG Airsoft Rifle! At around $200 Canadian you get a well made decent quality AEG Airsoft Rifle that not only looks and feels really good, but performs as good if not better than some much more expensive AEG Airsoft Rifles out there. All you really need to get on top of this purchase would be a decent charger and battery setup along with some quality Airsoft BB’s and then you are ready to go. No need for any more upgrades at least not right away. So if you are looking for an affordable AK type AEG Airsoft Rifle with no real compromises to speak of, look no further than the Specna Arms Core SA-J73 AEG Airsoft Rifle. Not much else will be a better option in this price range.
In this Field test Shooting Video, I test out the Specna Arms Edge SA-X01 AEG Airsoft Rifle in my Indoor Replica Airguns Sea Can Shotgun Range to find out what the velocity is and what the accuracy is like shooting .20 gram Airsoft BB’s through my Chronograph. I also shoot in both semi and full auto at a paper target setup 30 feet away. If you are more interested in details and specifications for the Specna Arms Edge SA-X01 AEG Airsoft Rifle then make sure to watch my Table Top Video I have already made that also has some nice close up video for you to check out…
So first up I loaded up a mag full of .20 gram Airsoft BB’s and proceeded to shoot 5 rounds through my Chronograph. Specna Arms claims around 380 fps using the preinstalled spring setup, I averaged 348 with my slowest shot recording 344 fps and my fastest shot hitting 351 fps, so all of them pretty close in terms of velocity but a bit under the claimed 380 fps using .20 gram Airsoft BB’s
With the Velocity Test completed I moved on to my Accuracy Test for the Specna Arms Edge SA-X01 AEG Airsoft Rifle Field where I not only shot 10 rounds in semi auto to see how tight of a grouping I could get, I also finished up the 120 round magazine in full auto to see if that grouping opened up a bit with a lot more rounds and a bit of full auto shake. For my 10 shot grouping I did get around a 2 inch spread, I did notice the Specna Arms Edge SA-X01 AEG Airsoft Rifle shot really low and a bit to the right out of the box. I would say about 8 inches low and 3-4 inches to the right. There is some sight adjustment you can do so you should be able to dial in the sights to your personal preference. When I switched over to full auto which is always more enjoyable with AEG Airsoft Rifles, the grouping did open up a bit but not a lot more, maybe as much as 4 inches but I did put close to 100 rounds additionally into the target.
Overall I am impressed with the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I would have liked to have seen it shoot a bit closer to the bullseye out of the box using the iron sights, but personally I would more than likely add a red dot sight anyway, and that will correct any sighting problems one may have with this Airlift Rifle. The FPS is I would say about perfect for most Airsoft shooting conditions and it can be used with the pre-installed spring either for CQB or out door games. I do like the 120 round magazines as there is no need to whined a spring half way through a magazine but you will need more magazines on hand or a good speed loader handy for an Airsoft Battle. Just keep in mind your battery options will be limited due to the battery area being rather small since this very compact AIrsoft Rifle does have limited space to put a battery.
Type: AEG Airsoft Rifles Manufacturer:Specna Arms. Model:Edge SA-X01 Materials: Mostly metal/aluminum. Weight: 5.52 pounds ( 2.50 kg). Total Length: 23.5-27 inches (597-686mm). Barrel: 10.63 inch (270) inner 6.03mm tight bore barrel non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 380 round magazines. FPS: 380 fps with installed spring, included M90 spring will be lower fps.
Trigger Pull: The trigger pull on the Specna Arms Edge SA-X01 AEG Airsoft Rifle is fairly shot and light, it is basically a simple off off switch as it is not mechanical but rather electric. For this reason there is no real creep or feel of a release. When you get to a point in the trigger you close a circuit that activates the electors motor cycling the spring.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms Edge SA-X01 AEG Airsoft Rifle, I am planning to make a video for this rifle next week if all goes well. I have reviewed other Specna Ames Core products in the past and made Field test Videos for them so perhaps check one of those videos out in the time being for a bit of a heads up of what you can expect from the Specna Arms Core SA-J73 AEG Airsoft Rifle.
Build Quality: Specna Arms Airsoft Rifles are made of good quality no matter if you go with the Core or Edge versions. You will still get a quality product with quality materials and metal parts where you need them. The Edge Series offers upgrades like more metal parts, improved gearboxes and electronics along with additional accessories but you pay a bit rmeo for the added quality and add ons.
Realism: The Specna Arms Edge SA-X01 AEG Airsoft Rifle is based on the AR15 or M16 platform of course in a very modern compact PDW styled. It looks and feels the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of your Specna Arms Rifle.
Pros:
Very high quality product with quality components throughout (Already listed in Specifications).
4 positions rear stock.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Almost all metal build.
Removable fully adjustable pop-up sights.
No orange tips on our Canada Store versions.
Lots of rial mounting options using M-LOK System..
Comes with a fore grip and deans connector and two magazines.
Easy access to motor for any possible trouble shooting you any need to do.
I love the compact size. perfect for close closer quarters situations.
Cons:
Much higher cost than Core Series.
Magazine capacity is low but comes with two magazine.
You will need a very specific compact battery setup for this Specna Arms model.
Comments:
I for sure like the look of the Specna Arms Edge SA-X01 AEG Airsoft Rifle, but more than that you get a really great Compact PDW Airsoft Rifle at a reasonable price with a ton of quality components and a mostly all metal build. Specna Arms even includes an additional magazine in the box. You could go with one of their Core series of Airsoft Rifles in a similar PDW and save a bit of money but if you can afford the upgrade then I would go for this version as you will not need to upgrade it in the future and that alone will save you some money over time. I would suggest adding a couple Lipo batters and a good charger to your shopping cart and maybe even an couple more magazines.
My Vimeo Table Top Review for the Specna Arms Edge SA-X01 AEG Airsoft Rifle:
Type: AEG Airsoft Rifles Manufacturer:Specna Arms. Model:Core SA-J73 Materials: Fiberglass reenforced plastic and metal/aluminum. Weight: 5.7 pounds (2.59 kg). Total Length: 23.4 - 32.6 inches (594 - 828mm). Barrel: 15.7 inch (399mm) inner 6.03mm tight bore barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 430 round magazine. FPS: 370-380 fps with installed spring, included M90 spring will be lower fps.
Trigger Pull: The trigger pull on the Specna Arms Core SA-J73 AEG Airsoft Rifle is similar to a light single action trigger as essentially the trigger is non-mechanical, but rather it is more like an electrical on off switch. There is a little bit of take up with virtually no extra friction to let you know when the release is, with a bit of use you will figure out exactly when the trigger will release the action.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms Core SA-J73 AEG Airsoft Rifle, I am planning to make this video for next week if all goes well. I have reviewed other Specna Ames Core products in the past and made Field test Videos for them so perhaps check one of those videos out in the time being for a bit of a heads up of what you can expect from the Specna Arms Core SA-J73 AEG Airsoft Rifle.
Build Quality: One thing I can say, is no matter if you get the Core or Edge version of the Specna Arms AEG Air Rifles, you are getting extremely good value for your money, and neither one is going to have any low quality parts in it. Even the lower cost Core Series will have fiber glass reenforced plastic and metal parts along with a metal gearbox and virtually almost the same build as the more premium and higher priced Edge Series. You will get upgrades in the Edge Series like an aluminum receiver and buffer tube, a GATE X-ASR Mosfet, upgraded Gearboes, and an additional magazine.
Realism: The Specna Arms Core SA-J73 AEG Airsoft Rifle is based on the AK platform with a bit of a more modern look to it which includes a synthetic folding stock, a sight mounting system and a more modern magazine design. The Specna Arms Core SA-J73 AEG has lots of metal parts in it and has a good overall weight and feel to it which make is not too heavy or too light in my opinion. Our Canada version even come with a black flash hider rather than orange one which helps with realism.
Pros:
Very affordable price ($200 at time of video), yet very high quality product for what you pay.
Quality components throughout both the Core and Edge series.
Precision barrel internal 6.03mm diameter.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Plastic parts are fiberglass reenforced making them very durable.
Rear sight is adjustable on the fly for elevation.
No orange tips on our Canada Store versions.
Side mounting option for an optical or red dot sight system.
Metal V3 Gearboxes with metal gears and mostly all metal parts inside.
Decent amount of space for a battery.
Weight is about perfect, may actually too heavy with metal receiver?
Cons:
Plastic receiver.
Need to remove dust cover and use a screwdriver to adjust the hop-up.
No battery or charger included.
Comments:
The Specna Arms Core SA-J73 AEG Airsoft Rifle for right around $200 is not what I would expect for such a lower priced more entry level Airsoft Rifle. The build quality and components in this Airsoft Rifle are not budget by any means and when you hold it, it feels like a very high quality product. Sure you don’t get a battery or charger with it which you often find bundled with lower cost Airsoft Rifles, but generally these batteries and chargers are extremely entry level and will require upgrading almost immediately. So do yourself a favor and invest in a good battery setup if you do not already have one. If you’re in the market for an AK based AEG Airsoft Rifle and have a limited budget but still want a decent product, then I would recommend the Specna Arms Core SA-J73 AEG Airsoft Rifle for sure.
My Vimeo Table Top Review for the Specna Arms Core SA-C07-PDW AEG Airsoft Rifle:
Type: NBB CO2 BB Pistol. Manufacturer: Distributed by Gamo. Model: P-20. Materials: Plastic & metal. Weight: .97 pounds (439 grams). Total Length: 7.25 inches (184mm) Barrel: 4.25 inches (108mm) metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto NBB, double action only trigger. AmmunitionType: 4.5mm steel BB's. AmmunitionCapacity: 20 round metal stick magazine. FPS: Claimed 400.
Trigger Pull: The trigger pull on the Gamo GP-20 Combat CO2 BB Pistol is the same as pretty much all of the DOA trigger low cost BB Pistols where the trigger has to do all the work. Much of which is pulling back the fairly strong internal hammer spring which in this case is the barrel which protrudes slightly out of the front of the pistol until you reach the release point, and it snaps back hitting the valve and pressurizing the Airgun. This will give you a bit of a finger workout if you are shooting fast and want to empty out the 20 round magazine.
Accuracy: At this point I have not tested or shot the Gamo GP-20 Combat CO2 BB Pistol but I plan on making my Field Test Shooting Video the following week so stay posted for that. I do expect it to perform nearly exactly live every other Airgun made like this, and there are many that essentially have all the same internal components with a slightly redesigned outer shell, so mechanically they are all the same and should shoot about the same. It should get really close to the claimed 400 fps and I expect it to shoot under a 2-3 inch grouping, unless I am having an off day.
Build Quality: The build quality of the Gamo GP-20 Combat CO2 BB Pistol is what you expect from almost all plastic BB Guns of this type. It is not super heavy but that means less can break when dropped on a hard surface. Fit and finish are good and one gripe I have with most of these types of BB pistols built the same way, is that the grips are a bit lose so it can pop off when you pull it back. The Gamo GP-20 Combat’s grips are a lot more solid and this does help make the Airgun feel a bit more confidence inspiring.
Realism: The Gamo GP-20 Combat CO2 BB Pistol from what I can see is not an exact copy of a real steel pistol in production but it does look like a modern semi auto pistol in design. The barrel is slightly recessed, and the CO2 tab is also hidden inside the grips, so unless you get close to the pistol you would think it could be the real deal. That said some giveaways are the moulded into the slide ejection port and the screw holes on the right side of the two plastic halves of the Airgun along with the kind of out of place standard safety switch that looks more like something you would find on a piece of electronics.
Pros:
Very low cost and simple design will make it reliable.
Fit and finish looks decent for an all plastic gun, grip are actually pretty tight.
Picatinny rail for adding accessories like a laser or tac light.
Standard metal stick magazine found in lots of Airguns for cross compatibility.
Right hand screws are very small and less obvious then some other two sided low cost plastic Airguns.
White dot sight up front and fiber optic in the back are easy to see on all backgrounds..
Safety is right above the trigger finger so easy to switch if you are right handed.
Recessed barrel for added realism.
Cons:
Some more metal would have been nice, but typical of a low cost BB shooter like this.
Double action trigger does require some work, so action shooting will be a bit harder.
Not a lot of working parts other than the trigger, safety, and magazine release.
Comments:
I have reviewed many CO2 BB Pistols built exactly like the Gamo GP-20 Combat CO2 BB Pistol, so it is at least for me, not the most exciting Airgun review but I always enjoy the chance to shoot even the most basic of Airguns. I would say the Gamo GP-20 Combat CO2 BB Pistol in this category is one of the nicer options as I feel Gamo stepped up the build quality just a bit, even if it was just to make the grips feel more solid and less prone to popping off when loading CO2. It is a little bit beefier than similar CO2 BB Pistols in this category so maybe not the best for smaller handed individuals but good for someone like me with larger mitts. The price is right for sure and with its simple design, it should perform as expected for a good long time!
Another box showed up at my door and this time I had no idea what was inside it, I asked the boys in the warehouse to surprise me and send some new product as I was low on review items, and in a couple of days later this tall somewhat large box showed up. In this Replica Airguns June Mystery Box Unboxing Video I open the box and take a look at what’s inside. I recommend you just watch the video and enjoy the suspense with me, but if you want to cheat and find out now, then look below at quick breakdown of each item…
What you can expect from this Field test Shooting Video for the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle are two things for sure. I test out the velocity with both 4.5mm Steel BB’s and .177 caliber lead pellets, I also chuck both of these rounds downrange to see if one may be more accurate than the other and how close I can get a 5 shot grouping for each ammunition type. If you are looking for details and specifications and perhaps some more close up video of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle then you may want to watch my Table Top Video for it here.
If you have watched any of my hundreds of Field Test Videos, then you already know I start off shooting 5 or so rounds through my Chronograph to see what the average velocity is going to be. In this Field Test I shoot 3 rounds of each ammo type, 3 BB’s and 3 pellets since it is a pump Airgun and they tend to be more consistent than a CO2 Airgun. Barra claims around 350 fps, I am not sure if this is for BB’s or Pellets or both? As it turns out (spoiler alert), both ammo types performed about the same in both the velocity and accuracy portion of my testing. For BB’s, my chronograph testing got 303, 316 and 316 for an average of 312 fps. For pellets my chronograph results were 309, 309, 314 for an average of 311, so only 1 fps off between the two. Keep in mind the BB’s weigh around 5.1 grain while the pellets I was using were around 7 grain, so the pellets will be carrying more energy downrange and hit a bit harder. By the way they are also harder to load so I would suggest just shooting the steel BB’s in this one since you can keep the fun times flowing better...
Next up for my accuracy test of the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, I again shot both ammo types, but 5 rounds of each and just like the velocity test they matched each other almost exactly. Both the steel BB’s and lead pellets I was using shot really well centered left to right, maybe just a hair to the left and both shot just about an inch or so high on the bullseye I was aiming at 30 feet away. The 5 BB’s grouped nicely for me at about an inch while the pellets did get a slightly tighter 3/4 inch grouping for me in this test. I was using a semi rested shooting position sitting on a stool in the back with the rifle rested on a sand bag up front.
The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle really surprised me in how it performed, It’s not going to be the most powerful BB/pellet cowboy rifle out there but compared to a Red Ryder it does have a bit more punch and in terms of accuracy I found it shot better for me than at least I can do with a Red Ryder type BB rifle. You also have the option of shooting BB’s or Pellets but I would recommend shooting BB’s since you have that 50 round hopper and the BB’s auto load when you pull the bolt back which is much easier than loading pellets with a pair of tweezers which is what I needed to do to get them in with my sausage fingers. One more thing to mention is I do not recommend pumping this air rifle more than 1 time, not only does the manual say not to, but there is little benefit in pumping it more times with only the risk to damaging the airgun. I pumped it 4 times and only got about 20 fps more out of it so just don’t do it. If you want a Cowboy style Air Rifle with a little more realism than say a Red Ryder but that shoots about the same then checkout the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle.
Type: Lever/Pump Dual Ammo Rifle Manufacturer: Distributed by Barra. Model:Junior Dual Ammo Pump Cowboy Rifle. Materials: Mostly plastic, some metal. Weight: 4.1 pounds (1859 grams). Total Length: 36 inches (91.44mm). Barrel: 18 inches (45.7cm) metal rifled. Propulsion: Pump Compressed Air. Action: Lever/Pump Ammunition Type: .4.5mm steel BB’s & .177 Caliber Pellets. Ammunition Capacity: 50 BB’s in hopper, single shot Pellets. FPS: Claimed 350-400.
Trigger Pull: The trigger pull on Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is respectable at about 5 pounds with a medium to short pull length. I would say it is perfect for novice shooters as it is not overly light so as not to go off easily by accident and not too heavy for youth shooters with less finger strength than adults. When you pull the bolt back to reload the ammo, the internal cocking mechanism is activated allowing for single action type shooting. You do need to activate the bolt with each shot.
Accuracy: My dedicated field test shooting video is planned for this week, so for now I have no idea what to expect in terms of velocity and accuracy from the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle, other than it is claimed to shoot around 350 fps when using pellets. It does have an 18 inch rifles barrel which should contribute to helping a lot with accuracy, so I do have high expectations especially since it has a pretty good trigger and when looking down the sights they allow for a nice tight fix on the target. The rear stock is short but not so short that it feels cramped for an adult shooter which should also help when I perform my accuracy test.
Build Quality: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is nothing special when it comes to materials being used in it. It is for the most plastic with the exception of the inner and outer barrel along with the rear sight and I would imagine some other internal parts. It does feel not so bad as it is a bit over 4 pounds and is smaller in nature so it feels solid enough in the hand. I wish the Pump/Lever was metal as it would of felt a bit more solid and would have added a bit more additional weight to the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle. Fit and finish is good and overall the gun looks and feels good.
Realism: The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is essentially styled after the Old West Lever Action Cowboy Rifle, and it has everything we would expect other than loading shells which is available in other Lever Action Air Rifles if you don’t mind paying a premium for one. The lever is actually not a lever but more of a pump so the action and look of the lever is not exactly as you would expect from a true lever action rifle, but when it is locked in place it does look the part. The gold receiver and rifle band looks sharp and I feel matches up with the dark imitation wood stock nicely. One point to make is that the hammer is not the hammer but actually the safety and the bolt not only opens the breach area but also acts as the cocking mechanism for the internal hammer.
Pros:
Super easy to pump.
Fit and finish looks decent for a mostly plastic airgun.
In terms of realism it does look like a more compact lever action rifle for the most part
Can shoot either BB’s or Pellets.
Holds 50 BB’s in the hoper for quicker follow up shooting.
Metal octagon outer barrel adds addition weight to a mostly plastic gun.
Rear sight is metal and is also adjustable for elevation.
Trigger pull is pretty decent, not too light but is short and about 5 pounds.
Recessed barrel for added realism.
Made for kids but the shoulder pull length and sight placement works for adults too.
The gold receiver looks good and gives it a unique look.
Cons:
Mostly plastic build.
Manual says only one pump but I wonder why this is the case or perhaps just to deregulate it?
Pellets are hard to load especially if you have larger hands and fingers.
Comments:
The Barra 1866 Junior Dual Ammo Pump Cowboy Rifle is a competitor for products like the Red Ryder but it has a bit more realism in terms of looking more like a replica of a real steel Lever Action Cowboy Rifle. It also allows for shooting pellets and has an actual rifled barrel so hopefully this helps with accuracy. You can still kind of shoot it Lever Action Style when shooting BB’s but there is the addition of charging the bolt with each shot over and above working the Lever / Pump, so it will take a bit more time to get those follow up shots as compared to a Red Ryder BB Rifle. One other point to make is that the lever is actually not a lever but more of a pump since this is not spring powered but instead has an air reservoir which on this version only allows for one pump, but on the non-junior version you can pump it up to 10 times and get a claimed 800 fps out of it (US Version). I am going to try pumpkin the Barra 1866 Junior Dual Ammo Pump Cowboy Rifle up to three times to see if there is any difference in power but this could void your warranty if you damage the air reservoir by over pressuring it. So be good and only pump yours once as instructed in the manual.
Type:Blowback BB Pistol. Manufacturer: Made and Distributed by ASG. Model:CZ Shadow 2. Materials: Mostly all Metal. Weight: 2.7 pounds (1230 grams). Barrel: 4.5 inches (114mm) metal non-rifled. Total Length: 85 inch (215mm). Propulsion: 1 x CO2. Action: Semi auto blowback, single & double action trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 17 round drop out full size metal magazine. FPS: Claimed 285.
Trigger Pull: The trigger pull on the ASG CZ Shadow 2 Blowback CO2 BB Pistol is both single and double action, by either pulling the slide or hammer back you engage the single action trigger which is nice and short and light with a medium take-up. You will need to pull the slide back to load a BB into the breach area for your first shot or you will simply be shooting CO2 on that first shot. If you drop the hammer down once a BB is in the breach, you can shoot in double action which is much heavier but it is fairly smooth without any noticeable sticking points.
Accuracy: I have not shot the ASG CZ Shadow 2 Blowback CO2 BB Pistol or made my Field Test Shooting Video so far, that will happen hopefully next week. So right now I can not comment on the true velocity or accuracy of this BB Pistol. It is very well made so I expect it to perform like most Full Blowback CO2 BB pistols which means it should shoot around a 1-2 inch 10 shot grouping at 30 feet away. And I expect it to achieve a velocity close to the manufacturers claimed fps, so just under 300 fps as claimed by ASG. We will find out for sure next in a weeks time!
Build Quality: TheASG CZ Shadow 2 Blowback CO2 BB Pistol is distributed by ASG but I am not 100% sure who exactly makes it for them. I feel it is either going to be KJWorks or KWA. In either case both companies make very high quality Airsoft and Airguns and that is present with the ASG Shadow 2 Blowback CO2 BB Pistol. Fit and finish are excellent and the entire gun is virtually all metal with an anodized slide and zinc grips. It weighs in at a very hefty 2.7 pounds and has a very solid feel to it.
Realism: The ASG CZ Shadow 2 Blowback CO2 BB Pistol is a 1 to 1 copy of the real steel CZ Shadow 2 IPSC Pistol and side by side it would be very hard to tell one form the other. It features full blowback operation and can by fully field stripped. All the mechanical parts work like the real steel version adding to the realism of shooting this CO2 Competition built Blowback BB Pistol. Again it is full metal which not only helps it look the part, but also feel the part. It is a very realistic replica and to make it even more believable, ASG has provide the CZ licensing to add all the correct markings to this product.
Pros:
Single and double action trigger with a nice light short single action trigger.
Fit and finish is excellent, very little slide wiggle, all metal build.
This pistol is heavy at 2.7 pounds!
Extremely close replica of the real steel CZ Shadow 2 in both looks and function.
Rear sight is fully adjustable and sits very flush with the slide.
Fiber optic front sight helps with quick targets acquisition.
CNC machined Aluminum slide and full metal build including the machined zinc pistol grip sides.
Recessed barrel for added realism.
Full size 17 round metal magazine holds the CO2 and BB’s and adds additional weight.
Side swappable Ambidextrous magazine release.
Extended trigger guard makes shooting with gloves easier.
Claimed to be highly accurate, we will find out during my Field Test.
Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.
Heavy slide spring with fast blowback action, great for action shooting.
Licensing all over this gun true to the real steel version.
Cons:
Velocity of claimed 285 seems low.
Price will be a bit higher than some similar guns like this but the quality of the ASG CZ Shadow 2 is very high.
May be a bit heavy for some people.
Comments:
The ASG CZ Shadow 2 Blowback CO2 BB Pistol is a quality product all around not only being just full metal but also icormdrating Anodized Aluminum in the slide but also making the grips out of CNC Zinc. Fit and finish is excellent and the overall IPSC look is very appealing. It is a bit heavy coming in at 2.7 pounds but this will keep it very stable when performing competition styled shooting. I am really looking forward to seeing how this one performs as I have high expectations so I hope later on next week when I make my Field Test Shooting video it delivers as promised.
Trigger Pull: The trigger pull on the Barra Cowboy Series 1858 CO2 BB Revolver is a single action only trigger, so you will need to cock the hammer back before each shot which does take away almost all of the trigger pull length and weight, making it short and light and easy to shoot. Perfect for slowed down accurate shot placement, but less effective as an action shooter.
Accuracy: I have not tested out the Barra Cowboy Series 1858 CO2 BB Revolver but it is a lot like the Crosman Fortify SA CO2 BB Revolver so I am thinking it will perform at lot like that CO2 BB Revolver, if you want to get an idea on how the Barra 1858 might perform, you can watch my Crosman Fortify Filed Test Shooting Video to get a heads up before I make my official Filed Test Shooting Video for the Barra Cowboy Series 1858 CO2 BB Revolver.
Build Quality: When it comes to the build for the Barra Cowboy Series 1858 CO2 BB Revolver, there is not a lot to really get super excited about. It is basically a mostly all plastic gun with some metal parts internally like the barrel, trigger, hammer and CO2 area. The Barra 1858 has that lower cost Airgun, two halves, screwed together build which generally looks better on the side without the screws showing. As it is mostly plastic it is very light in the hand at only just about a pound or so. Overall there are not a lot of moving parts so it should be reliable enough just because there is not much to break or go wrong. All the mechanical components do what they need to do and feel solid enough.
Realism: The Barra Cowboy Series 1858 CO2 BB Revolver at a glance looks a lot like a Remington 1858 Single Action Revolver, it has the same shape and size but the weight is way less being mostly plastic. The lack of actual bullet holes in the cylinder looking at it from the front of the revolver also takes away from the realism. I guess I am really used to the new generation revolvers with working cylinders and real loadable shells but these guns are more expensive and hold less ammo as they are genuine to the 6 shooter capacity. The barrel is however recessed which is nice.
Pros:
Inexpensive revolver as compared to other shell loading styled revolvers out there.
A decent looking replica of a Remington 1858 Revolver.
Single action only trigger is short and light and well suited to careful shot placement shooting.
400 claimed fps is about perfect for plinking at ranges up 30-40 feet.
18 round magazine has a nice high capacity and easy to load when empty.
Should get lots of shots per CO2 as there will be very little CO2 leakage with a non shell loading design.
Safety is well well hidden just in front of the trigger so easy to get to.
Has a recessed barrel for added realism.
CO2 Allen key is built into grip so always have it on hand and will not lose it.
White markings as an warnings are not super obvious, could be a little lighter.
Comes with two starter CO2’s and some 4.5mm Steel BB’s.
Cons:
Almost all plastic builds makes it a bit light in the hand.
No fake shell holes in the front of the cylinder, could have added this for a more genuine look.
Sights are non adjustable but fairly normal for an inexpensive plinker.
Comments: The Barra Cowboy Series 1858 CO2 BB Revolver is a completely new concept in design over what we have become use to in todays Single Action Legend Revolvers with their shell loading design, the Crosman Fortify as I have mentioned is the only other new classic cowboy Revolver on the market like it so perhaps there will be more in the future. My shooting experience with the Crosman Fortify CO2 BB Revolver was about what I expected, it shot pretty close to the claimed fps and got around a 2 inch 10 round grouping shooting at a paper target 30 feet down range. So we will see if the Barra Cowboy Series 1858 CO2 BB Revolver performs about the same which was respectable. For a low cost BB Revolver you kind of get what you pay for here, which is not a bad deal at the end of the day considering the lower cost to get you up and shooting.
Another Unboxing Update Video taking a look at two Rifles and two Revolvers. A shell loading CO2 dual ammo 1875 single action Remington branded Revolver from Crosman, an 1858 single action CO2 BB Revolver from Barra, another Barra product kind of like a Red Ryder BB Riffle but in dual ammo version with a much different loading system called the Barra 1866, and lastly a Cybergun CO2 Airsoft MP40 with a very different magazine setup than I have seen before.
Type:Blowback BB Pistol. Manufacturer: Made and Distributed by KWC. Model:K17 (Black Barrel Version). Materials: Metal & Polymer. Weight: 1.68 pounds (760 grams). Barrel: 4.3 inches metal non-rifled. Propulsion: 1 x Co2. Action: Semi auto blowback, single action only trigger. Ammunition Type: 4.5mm steel BB's. Ammunition Capacity: 17 round drop out full size metal magazine. FPS: Claimed 329.
Trigger Pull: The trigger pull on the KWC K17 Black Barrel CO2 Blowback BB Pistol is short with only a little bit of take up, the release is light and crips. The blowback action resets the internal Hammer / Striker with each shot for that true single action trigger and it’s also nice that the trigger does have a working trigger safety. You will need to rack the slide for the first shot but then the blowback action takes over for the rest of the shots.
Accuracy: I have already made a Field Test Shooting Video for the Gold Barrel version of this same KWC K17 pistol so you can check out that video here to see how the Black Barrel Version will essentially shoot. If you want to know right here and now the KWC K17 shot right around 325 fps and got a 4 inch grouping at 30 feet away shooting 10 rounds into a paper target. Maybe the Black Barrel Version will shoot a bit differently for me? We will find out soon enough…
Build Quality: TheKWC K17 Black Barrel CO2 Blowback BB Pistol feels really good, I’m going to say it’s probably one of the nicest KWC CO2 blowback pistols I have had in my hands to date. The finish is really nice, the polymer frame is flawless and fit is really good with nice tight tolerances throughout. it may even look better to me than the Umarex Glock version it is similar to?
Realism: The KWC K17 Black Barrel CO2 Blowback BB Pistol being a full blowback Airguns is supper realistic in terms of looking like and functioning like a real steel gun. All the parts function as you would expect them to including the ability to filed strip the KWC K17 which gives you easy access to the hop-up. In terms of the KWC K17 Black Barrel CO2 Blowback BB Pistol being a replica it does look similar to Glock with some differences like the trigger guard, slide cut-outs, extended beaver tail and straighter pistol grip. As I shoe in my Review video the parts even mix and match with the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol we also sell. Available From: The Replica Airguns Store.
Pros:
Good weight with very solid feel to it.
Full blowback action will produce good recoil effect.
Full size drop out metal magazine.
Short and light single action only trigger.
No ugly markings or warnings.
I prefer the more standard look of this Black Barrel Version.
Field strips like the real steel version.
White dot sights front and back.
Adjustable hop-up to adjust for some limited elevation as needed.
Working trigger safety along with serial number safety.
Cons:
Full blowback action will produce lower fps and use up more CO2.
But plate could be more like the Umarex Glock version.
Comments:
I really like the KWC K17 Black Barrel CO2 Blowback BB Pistol as I did the Good Barrel Version, it may even be one of my favorite CO2 Blowback BB Pistols from KWC to date. I am not a huge fan of the Gold barrel version but that’s a personal preference thing. All in all if you’re looking for that Modern Pistol design than the KWC K17 CO2 Blowback BB Pistol is going to fit the bill. If you are a Glock fan also make sure to checkout our Umarex Glock line of CO2 BB, Airsoft and even Paintball Replica Pistol in our online Replace Airgun stores…
Many Canadians ask about options for what they perhaps could use for home defense since we are not allowed to really use any kind of a weapon to defend ourselves. A product classified as “Less Lethal” may be of interest to people living in Canada. I interviewed Byrna, just such a company that offers alternatives to standard “Lethal Interventions” for self protection and Josh from Byrna was kind enough to go over their pistol and rifle offerings specifically built to shoot paintball type ammunition for the purpose of stopping bad guys.
I am hoping this is a product we will be able to add to our online Replica Airgun Stores, as they do tick the boxes for import into Canada such as shooting well under 500 fps, yet having the ability to cause serious injury so as to allow them to be considered a non regulated firearm.
I don’t believe I have ever interviewed EKOL at SHOT Show in the past. I have dropped by their booth and taken a look at their product line and chatted but this year EKOL had some new and interesting products that I feel fit in nicely with Replica Airguns products and Replica Airgun enthusiasts.
In this EKOL SHOT Show 2024 Interview Omer from EKOL goes over three Airguns that are new for this year. The EKOL ES P92 which is a CO2 BB Blowback Beretta 92 Replica but rather than rebrand a KWC made version, EKOL makes their own in their own factory and it is very unique compared to other CO2 BB Blowback Beretta 92’s on the market.
Another product form EKOL based on the ES P92 Pistol is the EKOL ES P95B which I would call an SMG or submachine gun with a folding stock, but it only shoots in semi auto and is based off of EKOL’s ES 92 mechanically.
Lastly, Omer showed me one of their Replica Pellet Rifles, the EKOL AK which is a break barrel AK Replica Spring Piston Pellet Rifle that really looks a lot like an AK 47. EKOL also makes a very believable AR/M16 Break Barrel Pellet Rifle as well!
We have not carried much if any of the EKOL product line over the last few years so hopefully we can get some of these into our Online Replica Airguns Stores as they should even be legal for import into Canada.
This year at the KWA Booth I had the pleasure of running into John, and we went over a bunch of new items KWA had on display. John was even rocking a similar pair of Ray Ban Meta AI Glasses which made us look a little bit like twins…
In this KWA SHOT Show Interview John higgled the following products from KWA: The KWA ATP-Z and ATP-CT Optics Ready GBB AIrsoft Pistols which are convertible to SMG versions, along with a new prototype TAC-9 GBB Airsoft Rifle.
KWA AIrsoft products have always been one of favoriteAirsoft guns for their quality, looks and performance. They tend to offer a lot of Gas Blowback options which I really appreciate as a Replica AIrgun Collector.
It’s alwasy nice to have a chat with Bob at ASG, I have been interviewing him for years now and really missed not being at SHOT Show the last three years. As always, Bob really knows the ASG product line inside and out and took us through some of the new products and changes to the ASG lineup in 2024.
Some of the products include: The ASG CZ P-10 C CO2 Blowback Airsoft Pistol, the Steyr L9-A2 CO2/Gas Blowback Airsoft Pistol, the USW Gas Blowback Airsoft Pistol, the new Hybrid Airsoft line including the CO2 Blowback H-22 and the AEG H-15, the ICS Ape SE AEG Airsoft Rifle, and lastly the ICS Carnotaurus, Legacy, ACME High-Capa Pistol Series.
I am looking forward to get my hands-on many of these new ASG products and making reviews for everyone to checkout in the near future…
I’m pretty sure I have never made an Interview for Barra before in any of my past SHOT Show Videos, so I was really happy when I visited their booth and discovered a bunch of really great new products to talk about with GEO. Like many other Airgun companies, Barra does incorporate rebranded products from other manufacturer popular Airguns, but they also have some unique products I have never seen before. They are either working really closely with dedicated manufacturing companies or making these items in house. Either way it’s great to see new and interesting products.
Some of the products Geo went over with me in this SHOT Show 2024 Barra Interview where: The Barra CO2 1866 Lever Action Rifle, some Rifled Pellet Barrel Kits for the Schofield Revolver and 1866 Rifle, the 1858 CO2 BB Revolver, the 357 Shell Loading CO2 Revolver, the 400 AEG Airsoft Rifle and two new nameless Airguns they are still working on and perfecting, a full Blowback Competition Style BB/Airsoft Pistol and a compact AEG Airsoft Rifle.
It was great talking with the team over at the Barra Booth and I look forward to testing out their new items as they become available.
