In this video I show you four Premium AEG Airsoft Rifles made by VFC and distributed and H&K Licensed by Umarex. This is not a detailed review but rather I focus on the basic specification and show my reaction as I take my first look at all four Umarex H&K AEG Airsoft Rifles. I do show off some close up photos so you can get an idea on the finish and what some of the components look like.
For this Field Test Shooting Video I put the Specna Arms RRA SA-C10 Core and Specna Arms RRA SA-E10 Edge head to head to see just how they will compare in terms of FPS and Accuracy at least out to 30 feet. If you want to know more about each of these AEG Specna Arms Airsoft Rifles then checkout my Table Top Review where I show them up nice and close and also talk about their specifications and how they both compare to each other.
For my Chronograph test, I decided to go with .25 gram Airsoft BB’s, a little bit heavier than what was used for the claimed FPS of around 380 using the M120 spring which by the way is preinstalled in these guns for import into Canada. Both the Specna Arms RRA SA-C10 Core and E10 Edge shot pretty similar with the C10 Core averaging right around 300 FPS and the E10 Edge shooting a little bit faster with 318 FPS. Throw some lighter .20 gram Airsoft BB’s into the mix and these numbers would go up for sure. I was using the same 11.1 volt Li-Po battery for all of my testing in this video.
Next I placed a fresh paper target 30 feet downrange and placed 10 semi auto rounds into it using a seated and rested shooting position. Both Specna Arms AEG Airsoft Rifles shot about a 1 inch grouping. I did find with both of these Specna Arms rifles that when using the peep sight they shot too low and when using the top notch sight they shot too high at least at this distance. Of course the sights are fully adjustable so this can easily be taken care of and you can adjust the hop-up for even more elevation considerations. After my 10 shot semi auto test I placed both Specna Arms Airsoft rifles in Full Auto and let the paper have it! As expected the groupings did spread out a little bit but not all that much, perhaps opening up to around 3-4 inches.
After testing both the Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles side by side you really can’t go wrong with either version as they performed very similarly on the Chronograph and on Target. If you can afford to pay the little bit more than I would go with an Edge Series Specna Arms product since you do get a lot of extras for the little bit more you pay. Well worth it!
Type: AEG Airsoft Rifles
Manufacturer: Specna Arms.
Model: RRA SA-C10 / RRA SA-E10
Materials: Fiberglass reenforced plastic and metal/aluminum.
Weight: C10 4.9 pounds ( 2.2 kg) - E10 5.1 pounds (2.3 kg).
Total Length: 21.7 - 25.2 inches (550 - 640mm).
Barrel: 6.7 inch (170mm) inner 6.03mm tight bore barrel non rifled.
Propulsion: AEG.
Action: Single action semi & full auto.
Ammunition Type: .6mm plastic Airsoft BB’s.
Ammunition Capacity: Mid cap 120 round magazines.
FPS: 375 - 390 fps with installed spring, included M90 spring will be lower fps.
Trigger Pull: The trigger pull on both of the Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles is similar to a light single action trigger as they are essentially an electrical on off switch. There is a little bit of take up with virtually no extra friction to let you know when the release is going to be, with a bit of use you will figure out exactly when the trigger will release the action.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles, but plan to very soon. They are next on my list for Filed Test Shooting Videos so stay posted for that video coming out soon. I do expect them to perform well and will be shooting both of these models side by side to see if there is any noticeable difference between the lower cost Core versus the slightly more premium Edge Specna Arms versions.
Build Quality: One thing I can say is no matter which version of the Specna Arms AEG Air Rifles you deicide to go with (either a Core or Edge Series), you are getting extremely good value for your money and neither one is going to have any low quality parts in it. Even the lower cost Core Series will have fiber glass reenforced plastic and metal parts along with a metal gearbox and virtually almost the same build as the more premium and slightly higher priced Edge Series. You will get upgrades in the Edge Series such as a an aluminum receiver and buffer tube, a GATE X-ASR Mosfet, the New Orion Gearbox, deep laser engraved licensing and an additional magazine. All of this for the little bit more you pay for an Edge series Specna Arms AEG Airsoft rifle.
Realism: The Specna Arms RRA SA-C10 Core and E10 Edge AEG Airsoft Rifles are based on the AR15 or M16 platform of course in a very modern and PDW styled look. They look and feel the part for sure with lots of working parts including the safety, selector switch, charging handle, dust cover, adjustable rear stock, pop-up front and rear sights as you would expect. Most of the hardware should be interchangeable with a real steel AR if you want to personalize the look of your Specna Arms Rifle.
Pros:
Super affordable yet very high quality product for what you pay.
Two options to consider, both with good price points and value.
Quality components throughout both the Core and Edge series.
Rock River Arms Licensed with hologram on receiver.
ESA™ quick spring change system makes spring changes quick and easy.
Comes with two springs for potential indoor and outdoor usage.
Plastic parts are fiberglass reenforced making them very durable.
Quick release fully adjustable pop-up sights.
No orange tips on our Canada Store versions.
Lots of rial mounting options even on such short PDW styled AR’s.
Metal gearboxes with metal gears and mostly all metal parts inside.
Easy access to motor for any possible trouble shooting you may need to do.
Cons:
Popup sights are mostly plastic..
Need to hold back charging handle to access the hop-up wheel.
Comments:
Value for your money is what comes to mind when I think about the entire Specna Ams AEG Airsoft Riffle product line. And this goes for not only the lower priced Core Series but also the premium Edge Series. Both version are built supper tuff with quality components throughout. You are just getting upgrades you are probably going to do at some point in time with the Edge Series and of course more metal components when you spend about $100 more for a similar Edge version. I figure if you can muster up the extra cash then go with an Edge Specna Arms AEG Airsoft Rifle, that said, any of the Core models will be money well spent.
Make sure not also watch my previous Specna Arms YouTube Video where I introduce the product line, show you around several models and talk about the key differences between the Core and Edge versions.
My Vimeo Table Top Review for the Specna Arms RRA C10 Core & E10 Edge Airsoft Rifles:
We have a new line of Airsoft rifles from Specna Arms I am super happy to be introducing to the Replica Airguns Airsoft Community.
Specna Arms AEG Airsoft Rifles are extremely cost effective and offer value for what you pay that is amazing. In this YouTube Introduction Video I go over the main differences between the Core Series (lower priced) versus the Edge Series (mid priced) so that you can understand what the extra cost will get you when buying a Spenca Arms Edge Series AEG Airsoft Rifle over a Specna Arm Core Series AEG Airsoft Rifle.
I also show 12 different versions from the Specna Arms Core and Edge Series some with Rock River Arms licensing and some without.
Specna Arms Core Series
Price: Mid $200’s (CAD)
Materials: Fiberglass Reenforced Plastic & Metal
Mosfet System: No
Gear Box: Ver 2 Metal Fully Upgradeable
Spring System: ESA Quick Change - 2 Springs (380-310 fps)
Licensing: Rock River Arms Some Models
Magazine/s: Comes with 1 Mag
Specna Arms Edge Series
Price: Mid-high $300’s (CAD)
Materials: Aluminum & Fiberglass Reenforced Plastic
Mosfet System: GATE X-ASR
Gear Box: Ver 2 - Orion Gear Box, Reenforced Shell & Internals
Spring System: ESA Quick Change - 2 Springs (380-310 fps)
Licensing: Rock River Arms Some Models
Magazine/s: Comes with 2 Mags
Unfortunately here at Replica Airguns because of the Coronavirus we are also running into obstacles that are making it harder for us to Acquire, Process and Ship products to our customers. That said we are doing our absolute best to continue to offer Airgun related products to our customers during these trying times. Covid-19 is causing some delays in order processing and shipping, this is unfortunately but completely out of our control.
Most factories are located in Asia and which has been the hardest hit and many of them are not back up and operational and even if they are back at work many of them have switched over to making and supplying medical supplies.
Vendors here in Canada and the US are being shut down for 2 weeks (minimum) so supply will be running low. This is going to make restocking product take much more time.
Staffing is low as many workers have chosen to stay home and isolate as a precaution. This will slow down how quickly we are able to process orders so expect some delays.
Replica Airgun Online Store prices will need adjusting due to the CAD dollar devaluing against the much stronger US dollar. You may already see some price increases and will also see more in the future.
My advice since many people are at home right now is to take this time to do your research and take a good look at the products we sell in our Replica Airguns Online Stores. Watch our Airgun review videos and figure out what your next purchase may be. If you are in a position to purchase now, you may want to do so quickly as stock is limited and will continue to get more limited until factories start making more products and vendors are able to supply those products to us again.
This is just my Preview for the Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Gun. There will be more coming for sure for this one! Stay posted for my official Table Top and Shooting Videos later on.
I want to thank Drew from Tippmann Armory/Air Ordnance for sending me this unit for review. I have been wanting to get my hands one of these Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Guns for several years now and super glad I happened finally :) I really don’t think there is any airgun out there like it. I am really hoping that we will be able to have this one in both our Canada and US Online Replica Airguns Stores.
So what exactly is the Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Gun? It’s a PCP powered semi/full auto .22 caliber pellet firing Airgun and it is available in a Canada legal version that shoots just under 500 fps allowing it to be classified here in Canada as an unregulated Firearm. Unregulated Firearms do not require a license or registration and do not have to abide by the same rules that regulated firearms have to such as full auto limitations, magazine capacities and size limitations. So in other words if you want a full auto .22 caliber Machine gun here in Canada this is going to be your only option at least for now.
Some other cool features about the Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Gun is the trigger setup, pull it light and quick and you get a single shot, pull and hold using medium force and you get full auto but not at a super high rate of fire. Press and hold the trigger down hard and you get full auto with a much faster rate of fire so you control the rate of fire by how hard you press the trigger down. Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Gun also has an adjustment to set the maximum rate of full auto fire.
There are a few versions of the Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Gun but they all share the same base components, gun just need to decide what add on you want to have with it. I am going to say make sure to get extra 100 round belts and a speed loader since the Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Gun goes through a 100 round magazine fairly quickly!
That’s enough for now, more to come on the Air-Ordnance SMG 22 .22 Caliber Full Auto Pellet Machine Gun when I get back from my Holliday…
I want to thank David Bitkowski from Rx Target Systems for providing me with this sample unit to share with the Replica Airguns community. This video is only a Preview video as I wanted to get the RX Target System out there before I follow up with my actual Table Top and Shooting Videos for it.
For now here are some of the key points I want to get out to everyone:
Mission:
Rx Target Systems are meant to bridge the gap between firearms and airguns. They allow high precision shooting on a reactive, three- dimensional, rugged target that can be carted around in a back pack. What makes Rx Target Systems unique is that it is a system. It is so modular and adaptable with interchangable faceplates and paddles. Rx Target Systems are not going to break or get dented or dissembled on the range as many of the lighter gauged steel targets on the market today vs today’s high powered airguns.
Modular
One base allows interchange of faceplates for different target configurations
One threaded axel allows interchange of paddle from 10 gauge to 3/8 inch-thick paddles
Portable
Mount it on a shelf indoors
Mount it on a sawhorse outdoors
Carry it in a backpack or duffle bag- its 10 pounds
Rugged
Solid steel design
Faceplates from 10 gauge to ¼ inch thick
3-Dimensional
Faceplate is offset from paddles
Clipping the aperture does not guarantee a score
Intentions of target configurations
Standard 1 inch bulls.- represents kill zone of many small game at 30 yards, great for sighting in prior to the hunt. Also is ¼ scale of bull used in rapid fire pistol when shot from 8.3 meters. (25 meters distance/100mm bull)
1.2 inch bulls- represents the 4-10 ring of the NRA 10 meter air rifle target. Gears the shooter to consistently hitting the “black” of that target on paper
AAFTA style- represents common kill zones found in American Airgun Field Target Assosciation using 1.5”, 1”, ¾", ½", and 3/8”.
WFTF style- represents common kill zones found in World Field Target Federation using 15mm, 25mm, and 38mm apertures
10-15- Inspired by customer request, uses 10mm and 15mm apertures. High-Precision shooting.
Unfortunately the microphone system I was using for some reason did not record the Lapel Microphones we where record the audio with for this ASG SHOT Show 2020 Interview Video. The Camera we where recording video with did record audio but as there is so much back ground noise going on at large show like this, the audio is far from good. That all said try do you your best to listen to what we are discussing. There are sections where the audio is fairly distinguishable and sections in the video that are not due the proximity of the camera.
Bob from ASG and I go over serval products for ASG at SHOT Show 2020 this year. We first take a look at the new ASG Shadow 2 CO2 Blowback BB Pistol. One interesting fact about the new ASG Shadow 2 is that it has an internal Hop-up system that help BB’s travel further out for longer range shooting. The ASG Shadow 2 also has a fully adjustable rear sight making this Blowback CO2 BB Airgun a potentially pretty decent target pistol.
Another new product from ASG we focused on is the Airsoft ASG B&T Universal Service Weapon designed for first responder situations. The ASG B&T USW has an extended rear frame allowing for a non-recipricating red dot sight placement. The ASG B&T Universal Service Weapon has a built in folding stock and you can trick it out with all kinds of add ons to make it your own.
Near the end of the video we took a look at some new ICS Airsoft offerings from ASG.
This isn’t a SHOT Show 2020 Interview but most certainly worth reporting on. While walking around SHOT Show I ventured into the Chiappa Booth as I own a .22 caliber 1911 styled pistol from them and they do have some interesting products to take a look at.
Then I saw a red tip on one of their Chiappa Rhino Revolvers which caught my eye since I was not aware that Chiappa was making an Airgun version of their Rhino. Well as it turns out they are hoping to be shipping both an Airsoft version and Steel BB version around spring time and from what I can tell there will be two finishes, a kind of Gold Satin finish and also a Back finish version. As is with a lot of revolvers these days they will be shell loading which will help them look the part of a real steel Chiappa Rhino Revolver.
Looking forward to getting my hands on one when they come out in Spring this year!
In this SHOT Show Las Vegas 2020 Interview Video Scott takes us through a range of new products from Air Venturi.
Scott and I talk about the Air Venturi TR5 and how it came about to fill the hole the Baikal MP-61 left behind. We also talk a look at some new Air Rifles, a pumper called the Butterfly with a super cool linkage based system that makes pumping a lot easier. A PCP side lever cocking Air Rifle that I’m not even sure has a name yet but will be available in .177 .22 and .25 caliber pellet for around $299 US.
The only Air Venturi replica we looked at is a new Springfield Armory under lever Spring Piston Air rifle modeled after the M1A. Last up Scott went showed us how the Bada Bang targeting system is shaping up and looks to be almost ready for production.
This year at SHOT Show 2020 Mark from Umarex had a nice variety of new product to go over with us. Mark first went over the new CO2 Blowback Pellet firing Glock 17 which has a similar magazine and loading system as the Umarex SA10 Pellet Pistol.
We then took a look at another Glock replica, the Glock 18C Full Auto GBB Airsoft pistol with extended magazine, this one is sure to be a lot of fun with its selectable full auto feature and high capacity magazine. Perfect for hammering targets downrange or used as a very capable backup Airsoft pistol in the field.
Probably one of my favorites at the Umarex Booth this year was the Umarex Thompson M1A1 Legends Series CO2 Blowback Machine Gun. And yes it’s full auto capable along with blowback operation and a full size drop metal magazine that holds the CO2 and Steel BB’s. A nice addition to the Legends series of Pistols and Rifles.
Something really different this year for Umarex are the AirJavelin and AirSaber, two arrow firing rifles, the AirJavelin is CO2 powered and more tactical looking but still has more than enough power to shoot medium sized game, great for pest control while the bigger and (480 fps 178 foot pound) more powerful AirSaber is PCP powered and can be used for larger game like deer and wild bore. And it even looks like we will be selling these Arrow firing rifles in our Canada Replica Airguns Store with no PAL firearms license required!
Enjoy $50-$150 off on select items in our Canada Online Replica Airguns Store from February 3rd till the 14th!
We are featuring the Umarex T4E product line with several Paintball CO2 Guns on sale.
As always Crosman delivered again this year with some new Airgun products to show us. In this Velocity Outdoors SHOT Show 2020 Las Vegas Interview we take a look at three main standouts for me. The Crosman Full Auto R1 AR CO2 BB Rifle, the Crosman Full Auto P1 CO2 Blowback BB Pistol and something a lot different, the Havoc Prime Spring Powered Foam Dart Blaster.
The Crosman Full Auto R1 AR CO2 BB Rifle is a hybrid of the DPMS SBR and the PDW form past years with a focus on bringing the Crosman name to their own more true to form AR style rifle. You still get interchangeable but stocks and pistol grips if you want to swap them out for a different AR type. The Crosman Full Auto R1 AR CO2 BB Rifle has a longer accessory rail with a more traditional muzzle break. The R1 also comes standard with a red dot sight.
Velocity Outdoors also introduced the Crosman Full Auto P1 CO2 Blowback BB Pistol with select fire semi and full auto modes. The Crosman Full Auto P1 CO2 Blowback BB Pistol is essentially a KWC Taurus with the addition of a really nice laser sight.
One little treat that I think will be popular as a fun indroor shooter is the Havoc Prime Spring Powered Foam Dart Blaster. Unlike traditional Nerf guns the Havoc Prime Spring Powered Foam Dart Blaster actually shoots upwards to 130 feet per second and is super accurate with its rifled barrel. The ammo even looks like a 9mm round but not so deadly :) A Big thanks to Phillip from Velocity Outdoor for allowing us they interview him again this year!
This year Sig Sauer was showcasing their Airsoft Pistols with a new line called the Proforce series geared towards high end training. Sig has also included new Reflex Red Dot Sights that can be ordered already on the gun or as an add on accessory. The Proforce Pistol line includes both the M17 and M18 series Sig Sauer pistols.
Last year at SHOT Show 2019 Sig had introduced their Virtus .22 Caliber PCP Semi Auto Rifle but it was not ready at that time. Well now the Sig Sauer Virtus is ready to ship and yours truly will be getting one of these bad boys for review! Since the .22 caliber PCP Sig Sauer Virtus shoots around 700 fps with a 12 foot pound energy level you will need a PAL firearms license if you live in Canada but the Sig Sauer Virtus is a considered a “long gun” so no registration will be required in Canada.
Watch my Sig Sauer SHOT Show 2020 Las Vegas Interview for more info and cool stuff presented by Stephanie from Sig Sauer.
Here we go again, another round of SHOT Show videos brought to you direct from Replica Airguns!
As always I like to start off with a Teaser Video with a few quick clips of some of the new products I had the opportunity to take a look at at this years SHOT Show 2020 Las Vegas.
I will be rolling out Interview Videos as quickly as I can edit them and put them together for the following Airgun Related companies:
Sig Sauer
Umarex
Crosman - Velocity Outdoors
ASG
Air Venturi
Chiappa
So sit back and enjoy this years Replica Airguns SHOT Show 2020 Las Vegas Teaser Video!
Officially the Replica Airguns Boxing Week Sale starts December 26 and goes till the 29th but we may have kicked things off early this year so checkout the Canada Replica Airguns Store to save 10-50% off on select items!
The time you've been waiting for begins now with our SITE-WIDE Black Friday Sale! From now until Sunday, get 10% off your entire order. Exclusions apply to sale items. Don't wait for the 29th to roll around to save big on your next purchase. Shop now
In this Replica Airguns Video I talk about our already in progress Black Friday Sale and also who the winners are for this Years Replica Airguns Halloween Contest Giveaway.
Starting with the Replica Airguns Black Friday Sale you can already save up to 30% on select items in our Canada Replica Airguns Online Store. This is kind a pre-sale so if you see something you like grape it now since we may be changing the sale items up as we get closer to and for Black Friday.
Now onto our 2019 Replica Airguns Halloween Contest Giveaway winners, you guys decided which videos you liked best so here are the winners in order of most lies, I have also included views for your reference.
#1 EDDIE ADD: 747 views / 87 likes.
Winner of a Crosman Bushmaster Full Auto BB Rifle
#2 First State Airgun Reviews: 437 views / 45 likes.
Winner of a KWC 24/7 Blowback BB Airsoft Pistol
#3 WoodenWonder: 590 views / 39 likes.
Winner of an Umarex Legends Makarov NBB BB Pistol
#4 Jaydon HP: 394 views / 32 likes.
#5 Bandi: 389 views / 13 likes.
Thanks so much to our 5 video entry participants, you all did a really great job!
I hate to drag this on a bit longer but I really am having a hard time deciding on the top three videos for this years Replica Airguns Halloween Contest. This year more than any other it has been more about quality over quantity meaning we didn't get a lot of Halloween Contest video submissions but the ones we did get are really well done with lots of time, effort and thought put into each video.
So rather than myself choosing the winners, I will put it in the hands of you my dedicated followers and viewers. Read the instructions below on how to take part in deciding who will be the winners of this years Replica Airguns Halloween Contest!
Visit the 2019 Replica Airguns Halloween Contest Giveaway playlist.
Watch all five of this years video entries in the entirety.
Like your favorite three videos.
You can tell your friends and family about it and get them to vote.
The top three highest liked videos will win this years contest!
There are two parts to they video, the Halloween Costume Contest and what’s going on next week so make sure to watch it all…
Part 1 - 2019 Replica Airguns Halloween Contest Giveaway
Contest Rules:
Must be 18+ to receive a prize.
Canada & US winners only.
Halloween Costumes must have a weapon of some sort in them.
Must post a Halloween costume video to your YouTube channel.
Your video must be named "2019 Replica Airguns Halloween Contest Giveaway".
November 9th is the deadline date for you to get your video in.
Must post a comment in this video letting me know you have a video for me.
Must be a subscriber to the Replica Airguns channel.
Must like this video
1st, 2nd and 3rd Prizes Awarded:
What’s going on next week?
I will be away competing in a Body Building Fitness Contest so there will not be any more videos that week.
You may have noticed I have been withering away this past couple of months. This is in preparation for a Fitness Contest I am going into. For a show like this you need to be super lean to be competitive.
I have been competing since 2015 mainly in Men’s Physique and have qualified myself over the years to compete at the National level in Amateur Body Building.
The competition I am going to is the GNC / ALLMAX Canadian National Pro Qualifier in Toronto. If I do really well I can possibly get an IFBB Pro Card. Getting an IFBB Pro Card means I would now be able to compete in Pro Body Building competitions.
In order to win the Pro Card I would need to win my hight class and then win the overalls against the other winners in their hight class.
To date I have come close to winning the IFFB Pro Card but just missed it on two occasions. I am hoping to get the IFBB Pro Card this times around but I know the competition will be very competitive.
