This year at SHOT Show 2018 I had the please of again interviewing Dani Navickas from Sig Sauer. Dani Showed me several new pistols and a new break barrel rifle Sig Sauer is offering this year. The Sig ASP20 Break Barrel rifle will come in both .177 and .22 caliber pellet shooting versions. The ASP20 has a lighter than most cocking effort of only 33 pounds using their proprietary GlideLite system, along with an adjustable ASP MatchLite trigger.
Another Target pellet airgun from Sig Sauer this year is the .177 caliber pellet shooting Super Target, styled after the Sig Sauer P210 firearm. The Sig Super Target is a single pump pneumatic single shot pistol designed for 10 meeter shooting with adjustable sights and a crips short light trigger.
Sig like several other companies has rebranded their own version of the KWC 1911 CO2 Blowback BB pistols. The Sig Sauer licensed BB 1911 is based on Sigs We the People line to celebrate the American people and their Constitution.
Another new Blowback Pellet firing Sig Sauer Air Pistol was also introduced at SHOT Show, the Sig Sauer X-Five. The X-Five uses their 20 round belt fed magazine and also has Sig's Cam Lever CO2 loading mechanism. You will also find a rear adjustable sight on the Sig Sauer X-Five Pellet Pistol.
Last but not least and perhaps one of the most interesting new products coming out later this year from Sig Sauer is the P320MHS APS which is another new rotary magazine Blowback Pellet Pistol. What's a bit different with the new Sig P320MHS is that it has a full size drop out magazine that holds the CO2 and belt fed pellet magazine. The P320MHS can also be fully field striped, has an open ejection port and is styled after Sig's real Steal M17 firearm.
Umarex presented at SHOT Show this year a license I think we all thought was never going to happen! That would be Glock, for years Glock has been steadfast about not allowing their handguns to be licensed by anyone other than them. Glock has been very protective about their brand and intellectual properties as they are entitled to. I'm not sure what Umarex said to Glock but somehow they where able to get Glock to agree to letting Umarex license Glock pistols to be made into BB and Airsoft versions. The first BB and Airsoft models I was able to checkout at this years SHOT Show are pretty basic in design and are styled after the Glock 19.
The new Umarex Glock 19 licensed BB and Airsoft pistols are CO2 powered as expected but don't have blowback operation and have a fixed metal slide and a drop out stick magazine. The new Glock Licensed Umarex pistols do however look and feel really good, picking them up you would think you are holding a real steel Glock until you try and rack the slide or drop the magazine. Umarex did indicate there will be more licensed models coming out down the road with full blowback operation and full size drop out metal magazines, we just need to be patient as Glock is very particular about the quality control.
Another show stopper for me at the Umarex Booth was the Legends Cowboy Lever Action Shell loading BB Rifle. I love shooting my Red Ryder BB Rifle but I have to admit the Red Ryder kind of looks a bit like a kids beginner airgun. The new Umarex Legends Cowboy Lever Action Shell loading BB Rifle look, feels and operates like the real deal so it's not only going to be super fun to shoot but an awesome replica to own especially if your into the old west guns.
The Umarex Legends Cowboy Lever Action Shell loading BB Rifle uses two 12 gram CO2 cartridges and can hold 10 BB loaded shells in its tube styled magazine, working the lever action elects the empty shells. Umarex claims around 410 fps so the Umarex Legends Cowboy Lever Action Shell loading BB Rifle will be Canada legal without the need for a PAL. I thought the stock was real wood but was correct, it's actually made out of plastic, but I think just about anyone looking close up would have a hard time believing Umarex didn't use real wood.
Thanks to Mark Davis from Umarex for making himself available to interview!
I wanted to start my SHOT Show 2018 Interviews with Crosman because in my books they had one of the most exciting new products this year at SHOT Show, the Crosman Remington DPMS SBR which is a duel 12 gram CO2 powered 4.5mm steel BB firing AR styled semi and full auto Machine gun.
What I like about the Crosman Remington DPMS SBR is that it works a lot like an Airsoft Gas Blowback rifle with an internal bolt and buffer tube spring, working charging handle and dust cover, it even has a bolt release button. The Crosman Remington DPMS SBR can even be taken apart similarly to a real AR rifle.
The next new interesting product from Crosman, and as I found out the design is not entirely exclusive to Crosman, was the CO2 Non-Blowback Pellet firing 1911. The Crosman Pellet 1911 has an interesting magazine design, it looks like a traditional full size drop out magazine, which as you would expect holds the CO2 but rather than an inline BB magazine the new Crosman Pellet firing 1911 has two built in 6 shot rotary magazines that can be flipped so you essentially end up with a 12 shot magazine.
You will have to drop the full size magazine after the first 6 shots to flip the rotary magazines. The Crosman Pellet 1911 does not have blowback action but the double action only trigger is smooth and not too heavy. The slide is metal with a metal magazine and a polymer frame. The Crosman Pellet shooting 1911 comes in silver and black.
The next new product from Crosman was the Mako. The Crosman Mako is a Beretta styled CO2 Blowback BB pistol. The Crosman Mako features Blowback action, fiber optic sights, tactical grips, a double action trigger and a stick magazine that holds the 4.5mm steel BB's.
Thanks to Phillip Guadalupe from Crosman for allowing me the Interview!
So it begins, I have been to this years SHOT Show in Las Vegas and checked out the new products from Umarex, Crosman, Sig Sauer and ASG. I have taken video and Interviewed the main Airgun companies. Now it's time to report back to everyone what I saw and learned. To start with here is a Teaser Video with some scenes from Vegas, inside SHOT Show and of course some of the highlight products from each airgun company.
It was fun to shoot the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol for a change but really it was a lot like shooting one of my BB and Airsoft pistols, except in this case I was shooting .43 caliber rubber balls. I decided to not use paintballs inside my nice new Sea Can Indoor Airguns Shooting Range to keep things clean :)
First, I put three rounds through my Chrony Chronograph to see what the real world FPS would be, keep in mind I was using rubber balls rather than paintballs and the rubber balls are a little bit heavier than paintballs so this could bring the FPS down a bit compared to the lighter paintballs. Using a brand new CO2, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol average 316 FPS which was high than the claimed 290 FPS!
Moving on to my accuracy testing, as per usual I positioned myself 30 feet back from my paper target and using a seated and rested shooting position I shot a full magazine (8 rounds) of rubber balls on target with the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol. I was not expecting anything close to what I would get with a BB or Airsoft pistol since Paintball guns are not known for super tight groups. I did manage to shoot around a 6 inch group with most of the shots staying within around 3 inches. This is about what I was expecting as paintball guns are not meant for "target practicing", generally you are going to be shooting human sized objects and hoping to get some well placed center mass shots. 3-6 inch accuracy at 30 feet will get the job done for sure. I did find the trigger using rubber balls did have a bit more friction while the inner barrel seated itself into the magazine. When shooting quickly it is much less noticeable.
I know some of you are going to ask about using the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol with rubber balls for non-lethal self defense and the reality is it will not stop a person who is persistent on hurting you. There is simply not enough stoping power here. Will it "sting like a bitch" if you get shot up close with one of these Umarex Walther PPQ M2 .43 Cal. Paintball Pistol? For sure but a well timed punch has more chance of dropping someone than a .43 caliber rubber ball moving at around 300 FPS. You may scare someone off simply by brandishing it but you take the chance of the person calling your bluff. Perhaps 8 rubber balls to the face will change their mind but that's a chance you have to figure out if you want to take or not.
As a paintball pistol, the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is about the best I have seen in terms of replica paintball guns. It is as good as they come for realism, even better than many BB and Airsoft guns and in terms of performance it did not let me down either.
Wow, we had a great contest giveaway for the Umarex Ace in the Hole Single Action Army Revolver. We received 406 participants with close to 2000 separate entries, so thank you everyone that got involved. Unfortunately for the other 405 participants there can only be one winner and to see who that winner is you're going to have to watch my Contest Giveaway announcement video...
Type: Paintball Gun. Manufacturer:Umarex - T4E. Model:Walther PPQ M2. Materials: Metal & Polymer. Weight: 848 grams (1.87 pounds). Barrel: Smooth bore. Power Source: 1x12 gram CO2. Action: Semi-Automatic with blowback action. Ammo Type: .43 Caliber Paintball or Rubber Ball. Ammo Capacity: 9 Rounds. FPS: 290.
Trigger Pull: The trigger pull on Umarex Walther PPQ M2 .43 Cal. Paintball Pistol feels a lot like a double action trigger, internally it may be striker fired so expect a bit of a longer trigger pull with a fairly long reset and a medium strength trigger weight. There is also a working trigger safety which works well.
Build Quality: The build quality of the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is really very good, metal parts are where you would expect them, the slide, slide catch, barrel, magazine and most internal parts giving the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol a nice near 2 pounds (1.87 pounds) of weight with the magazine in which makes the Paintball version a little heavier than the real still version (1.53 pounds) but once the real steal version is loaded with a full mag this may even out a bit. The Walther PPQ M2 does have a polymer frame but again this is normal with todays modern guns and helps keep the weigth down. Fit and finish is also excellent.
Realism: The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol is a near perfect replica of the real steel Walther PPQ M2, form the fully licensed markings to the large .43 caliber diameter barrel. If you placed the Paintball version side by side with the real steel version I doubt you could tell them apart? You will find that the slide cycle distance is a bit shorter than it shoudl be meaning that when the side catch is engaged the slide does not go as far back as it should. Filed stopping the Walther PPQ M2 .43 Cal. Paintball Pistol may requires some tools.
Full Metal slide that locks back on the last shot.
All metal heavy full size drop out magazine adds some additional weigth to the gun.
Very Accurate Walther PPQ replica, almost indistinguishable from the real still version.
Everything works pretty much like the real gun so a great training tool.
Adjustable yellow dot sights.
Working trigger safety.
Fit and finish is excellent.
Magazine spring release really shoots the magazine out.
Love the .43 caliber barrel opening, adds to realism.
Cons:
Trigger pull seems a bit long as it shoots like a double action trigger, may be striker fired internally?
Magazine only holds 9 rounds, so you are going to need extras.
Blowback action is not full blowback, more like a typical BB airgun.
Comments:
I'm really glad to see another Replica Paintball Pistol available in Canada, especially such a well made and realistic version. The Umarex Walther PPQ M2 .43 Cal. Paintball Pistol looks to be perhaps the best to date .43 caliber Paintball gun on the market and may even prove to be an option for non-lethal personal defense when using rubber balls with it. Not that I would trust my life with it but it sure looks the part and I am sure most people would not want to be on the receiving end of 9 rounds coming at you. As a training tool and Paintball gun the Umarex Walther PPQ M2 .43 Cal. Paintball Pistol offers superb realism for this purpose. I am looking forward to testing mine out shortly :)
This Black Friday weekend save 10% on everything in our Canada and US Online Replica Airguns Stores! It's already begun and ends Monday night so don't wait too long...
This weekend save up to 10% on BB, pellet and airsoft rifles!
Also, loyal blog and channel followers get a coupon code for FREE SHIPPING on their purchase. Now that's something to be thankful for! Read this post for details!
Well the Shipping Container Office and Airgun Shooting Range is finally all ready to use and so for this first ever airguns shooting video in it, I simply wanted to try out a couple of airguns and see how this new setup worked. I also wanted to play around with some camera position setup to see how it all looked and if there will be any additional lighting or placement considerations.
Summer is here! While some folks are working on a tan, you're out working on your aim. This weekend, stock up on all the essentials — ammo, CO2, targets, extra mags — so you can shoot until the sun goes down.
When you spend $50 or more on any items, we'll ship them to you for free! Ends Monday, so don't wait.
I got a lot done this week in the Shipping Container Project Office and Airgun Shooting Range. Finished up all the drywall office mudding, I primed and painted the the office, connected up all the electrical and office lighting and installed the hardwood and baseboard along with the trimming. All that's left in the office is some caulking, paint touchup and then I have to figure out how I'm going to finish up the shooting hole? I do have some ideas for it though...
Next week I will be working on these odds and ends and hopefully may even get the shooting range spray foam insulted?
About three weeks ago I started the interior construction of the Shipping Container Project. So far I have cut out the window and door, framed the office in, installed the window and door, done some preliminary painting, wired in electricity for the entire unit, added an internet line, run underground wiring to the main house, installed insulation and vapor barrier and last but not least, added the drywall. I would have to say the worst is over and now I look forward to more of the finishing work like painting, flooring, connecting the electrical plugs and lighting fixtures.
The only real big jobs left to do would be painting the outside of the Sea Can and spray foam insulating the shooting range area but the spray foaming I will be contracting out and getting it done professionally so that part will be easy at least!
Yup, another Shipping Container Project Update Video! For those of you interested in this project I am sure you have been waiting with baited breath ;) And for those wanting more airgun videos you are probably wondering when I will resume making more... Heck, I'm with you on that one, this manual labour stuff is way harder than making airgun videos, but it is all for the greater good. I will try and slip in some airgun related videos before this Shipping Container Project is finished, that's almost a promise!!!
At this point I am almost ready for drywall, all the electrical is completed including running the power and Internetunderground to the poorhouse and main house. I need to have my Internets at full jam, that's a must!
This week I will be getting the electirfcal all hooked up to the main box, adding isulation and vapour barrier, some more window baar cleanup and painting and by end of the week I hope to have the drywall in place along with the taping and first layer of mud.
Oh yah, this video also includes a huge bonfire, every spring and fall we usually burn all the fallen branches and yard debris, everyone comes out and enjoys the huge fire :)
The Shipping Container Project is moving along nicely, this past week I finished up my office area framing, I also got the door and window cutout and installed! Next up on my list is cleaning up and painting the window bars so I can make the unit a bit more secure. I suppose I will have to do the same with the metal door since it is in dire need of a facelift. Once the doors and windows are all taken care of I will be moving on to the electrical and wiring. My goal is to get all of this done by end of week... The sooner I get this Shipping Container Project done the sooner I can get back to making even better and more consistent airgun videos in my new home.
This week I started framing in my new office and in this video I show the wall closest to the airgun range where the door and shooting opening are situated. I managed to frame the back wall in too. I also talk about how much time it takes even before you pick up a drill or hammer simply planning everything out and acquiring all the supplies required for a project like this. I have spent a ton of time researching what I need to make this Shipping Container Project into the vision I have for it. Spoiler alert, in my next video the framing is all done including the installation of my window and outside door, glad that part is over!
No need to hunt for deals this Easter, EVERYTHING in our store is on sale! So kickoff your long weekend with a long-barreled revolver. Celebrate spring’s arrival with a spring powered sniper rifle. Or treat yourself to a hollow chocolate bunny and some hollow point pellets. This deal ends soon, so hop to it!
Lately I have been doing a lot of sourcing out figuring out how everything is going to be laid out, what kind of lighting I want to use, how am I going to heat the office area in my shipping container. I want to keep everything pretty low power so my plan is to go with all LED lighting and a 400 Watt heater which should be
fine in my 90 square foot insulated office space. I plan to blast the shooting range with some propane heat on days when I need it for the shooting testing during the colder months.
I did pickup some hardwood flooring pretty cheap at Big Box Store and also got my 3x6 office window from Surrey New and Used. I already have metal doors that my father-in-law has had stashed away for several decades but at least now they are going to come in handy.
The first job or actual work I needed to do on the Shipping Container Project was to level and place the Sea Can onto some bricks/slabs, this also helps to keep the underside dry so it does not rust out. There shouldn't be much settling since the storage container is resting on my gravel parking area and the gravel goes right down about 1 foot deep to the hard pan.
Next on my list is starting the framing, figuring out exactly where the windows and doors will be and of course cutting the container to fit them.
This Vimeo video will be a little different than most, sorry no shooting and not even a single gun to show anywhere in this video! But it will lead to hopefully better shooting field test and table top videos down the road as I will have a dedicated space not only to work but to also shoot my review airguns.
Today, well actually yesterday a 40 foot shipping container (Sea Can) showed up at my house. This new metal box is going to be my airgun shooting range and office space combined. It will contain a 30 foot airgun shooting range closest to the rear doors so that I can open them and create a longer range if necessary. The front 10-12 feet of the container will be my work office space where. I will also use some of the container for storage.
Over the next few weeks I will be leveling the container, framing and insulating the office area, adding some electricity and lighting and of course completing some finishing work to the office space to make it more cozy. Eventually I hope to do some outside work giving the container some more curb appeal with a new coat of paint.
I plan to make more videos to share with everyone of the work progress as it happens so keep watching...
