In this Field Test Shooting Video for the KJWorks MK1 Carbine Green Gas Airsoft Rifle, I checkout the velocity and power here in the Replica Airguns Indoor Airgun Shooting Range, to find out if the real world velocity is in the ballpark of the claimed 450+ fps velocity by KJWorks. I also shoot 10 rounds into a paper target from a distance of 30 feet to see how accurate of a grouping I can get. If you are interested in details, specifications and more close up video along with the Pro’s and Con’s for the KJWorks MK1 Carbine Green Gas Airsoft Rifle, then checkout my Table Top Video Review for it here.
Starting first with my velocity test, I loaded up the magazine with propane gas along with a full magazine of .20 gram Airsoft BB’s. The temperature was around 20 degrees Celsius or 68 degrees Fahrenheit, so not super warm or cold, in warmer conditions I would expect slightly higher fps from the KJWorks MK1 Carbine Green Gas Airsoft Rifle. KJWorks claims 450+ fps and my testing came pretty close to this with my five Chronograph readings hitting: 468, 451, 435, 436, 426 fps. Averaging 443 fps.
Next I made sure I still had 10 Airsoft rounds in the magazine and placed a fresh paper target 30 feet down range and shot all 10 rounds into the target using a semi rested shooting position, with my hands on a sand bag up front and sitting on a stool in the back. This allows me fairly stable shooting with less human factor. I did have to aim a few inches low on the center of the target as the KJWorks MK1 Carbine Green Gas Airsoft Rifle does shoot a bit high at 30 feet. 7 out of the 10 rounds hit all within about 2 inches of each other and then three rounds came out of the group increasing the 10 shot grouping from 2 inches to around 5 inches. I am wondering if perhaps I had some miss-formed Airsoft BB’s in the bunch as the shots that came out, really did come out a lot compared to the tighter 2 inch 7 shot main grouping.
Overall the KJWorks MK1 Carbine Green Gas Airsoft Rifle performed well, the velocity was right on the mark and was fairly consistent dropping off a bit as the Rifle cooled down from the gas. Accuracy was very good side to side but up and down I did notice more variation. The trigger is a double action only trigger so it is a bit longer and heavier than a real steel Ruger MK1 that is known for its beautiful short and light Single Action Trigger. Still the KJWorks MK1 Carbine Green Gas Airsoft Rifle performed well and I think with some good quality Airsoft BB’s, perhaps even a bit heavier than I used in this test, one could improve the accuracy at range and really be able to use this for some longer range outdoor Airsoft games. As it is a fairly light and short Rifle it would make for a super easy to pack around sniper rifle option.
In this months Replica Airguns Mystery Unboxing Preview Video, I take a look at 4 new items that showed up at my door. Two Airsoft Rifles, one being AEG and the other one a GBB. I also received two accessories for the GEM Alias super tiny multi ammo CO2 Pistol, A .50 caliber Paintball Barrel for it and and a 12 gram CO2 Adapter.
Both Airsoft Rifles are new to me from a company called Novritsch which is a higher end brand so the pricing is not cheap for either Airsoft Rifle. It was nice to get an AEG and GBB to review, the Novritsch SSR77 AEG Airsoft Rifle is a Replica of the Steyr AUG while the Novritsch SSQ22 GBB Airsoft Rifle is essentially a custom modded Ruger 10/22 copy, at least from what I can tell, it is solid and really well built.
I have already made a Table Top Video for the GEM Alias CO2 Pistol but I have been waiting for the .50 Caliber Paintball Barrel to show up so I can test out all 4 barrel ammo options. I also really wanted the 12 gram CO2 Adapter so I don’t have to use the small 8 gram CO2’s which are harder to find and not as cost effective as the 12 gram CO2. So now I am totally ready to make the GEM Field Test Shooting Review.
Trigger Pull: The trigger pull on the BUG-A-SALT 3.0 Salt Gun is a Single Action Only trigger that requires you to work the pump action to load salt and prepare the hammer to fire in Single Action. There is a little bit of takeup and then a medium trigger pull weight that is about right for a pest control tool like this, as you do not want a super light trigger that could go off unintentionally. When you work the action using the pump, the real sight also pops up not only so you can use it but also to indicate that the BUG-A-SALT 3.0 Salt Gun is loaded and ready to fire.
Accuracy: So far I have not fired or tested out the BUG-A-SALT 3.0 Salt Gun as it is not the time of year for bugs just yet, so that portion of my review is going to have to wait until at least spring time when the bugs and flies come out in full force. I will not be making my traditional Field Test Shooting Video where I shoot at a Paper target setup 30 feet away, or even testing out the velocity in fps as the BUG-A-SALT 3.0 Salt Gun is only rated to shoot up to 3 feet away and I’m not sure how a blast of salt would even be read by a Chronograph or if that information is even important for a fly exterminator like this. I will be making some sort of shooting video for the BUG-A-SALT 3.0 Salt Gun when I am able to find bugs to blast…
Build Quality: The BUG-A-SALT 3.0 Salt Gun is made out of mostly plastic with I assume some metal working parts internally. Even the internal barrel is plastic since you are only shooting salt. The BUG-A-SALT 3.0 Salt Gun does feel solid and the working parts like the pump action, trigger and safety feel durable enough. The salt hopper lid may be a bit flimsy and if that breaks I’m not sure how one would keep the salt in the hopper?
Realism: The BUG-A-SALT 3.0 Salt Gun is not a replica gun to speak of, it kind of looks like a pistol grip pump action shotgun but there is really no way I feel anyone would mistake the BUG-A-SALT 3.0 Salt Gun for a real gun, this is probably good since you may want to keep it out lying around in your house for when you may need to do some bug blasting.
Pros:
Very unique product, not a lot of competition in the market.
Makes eliminating flies and bugs a lot more fun, would be fun at get togethers or parties.
Fairly well built, feels solid and durable.
Low cost to operate, only requires table salt.
Can get up to 80 shots per loaded salt hopper.
Can shoot flies up to 3 feet away.
Easy to access cross bolt safety.
Auto pop-up rear sight lets you know it is loaded and ready to fire.
SAO Trigger is relatively decent.
No bug guts mess to cleanup.
Cons:
Not suitable for larger bugs with hard exoskeletons like wasps or larger. Really only meant for flies.
Not a toy as it could be assumed it is. So be careful around kids as an eye shot could be very painful and cause injury.
Price is a lot more than a fly swatter that also gets the job done.
Comments:
If you hate flies as much as I do and would like a more sportsman like way to eliminate them rather than your standard fly swatter that basically mushes the fly into a bloody mess on what ever surface you mash it into. Then perhaps something like the BUG-A-SALT 3.0 Salt Gun may be just perfect for you. I am hoping it works as good as the advertising says it does. Based on some of the reviews I have watched it seems ideal for flies but may not so good for larger insects with hard exoskeletons. You are going to pay a lot more for the BUG-A-SALT 3.0 Salt Gun than a dollar store fly swatter will cost you, but I can guarantee you will have a lot more fun using it and no need for the messy bug juice clean up after a kill shot.
This will be my final Interview Video for SHOT Show 2025. I did get to talk with someone from Crosman but the Daisy rep was not around totally with so I did my best to talk about a couple of the Daisy products that I felt were interesting. If you are not aware, Crosman and Daisy have now joined forces together along with Gamo, Benjamin and SPLATRBALL so all of these product were on display at the Crosman Daisy Booth. I focussed on the Crosman M1 Full Auto Carbine and their updated all black ST1 Full Auto BB Rifle. We then took a look at some of the Game Face Airsoft Products and then I performed my own Interview/Review for Daisy talking about the Woodland Trail Model 1911 and Model 25 Lever and Pump Action BB Rifles.
I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.
Luckily I was able to find some time with James again this year and James gave us all the new details on some of the KWA updated and new products. Starting with the KWA ATP-Z Blowback Airsoft Training Pistol added recently to the KWA lineup, James also showed us a few versatile Carbine Pistol Kits made specifically for the ATP-Z and ATP-GT Pistols. Not yet fully released, James went over their updated TAC-9 hopefully coming out this year. We then got a nice tour of the updated Radian Model 1 AEG Airsoft Rifle with built in recoil system also built into KWA’s Q10 AEG Airsoft Rifle.
I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.
It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!
I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!
I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…
Type:Airsoft Gas Rifle. Manufacturer: KJWorks. Model: MK1 Carbine. Materials: Metal and plastic. Weight: 2.71 pounds (1.23 kg). Total Length: 33 inches (83.8cm). Barrel Length: 17 inches (43.2cm). Barrel: Metal non-rifled. Propulsion: Green Gas. Action: Semi auto double action only trigger. Hop-up: Adjustable metal Hop-up. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 17 round full size drop out metal magazine. FPS: 450+.
Trigger Pull: The trigger pull on the KJWorks MK1 Carbine Green Gas Airsoft Rifle is double action only which will make it a bit longer and heavier than the real steal Ruger MK1 as it is Single Action Only. The trigger is smooth however and does have a nice satisfying click to it that sounds like a firing pin being release. The unfortunate part is that the real steel version has an amazing single action only trigger so the contrast between the Airsoft and 22LR version may make this gun not as practical is an optional training tool if you own the 22LR version.
Accuracy: This part of the review is yet to be determined as I have not done my Field Test or Shooting Test for this carbine, so stay posted for my official Field Shooting Test. For now you can watch my Ruger MK I Gas version Field Test Shooting Review to get an idea on how the KJWorks MK1 Carbine Green Gas Airsoft Rifle version should perform, as they are very similar with the Carbine version having a longer barrel and shoulder stock added to it with should increase the velocity and perhaps the accuracy a bit.
Build Quality: KJWorks as usual distributes quality Airguns, the fit and finish on the KJWorks MK1 Carbine Green Gas Airsoft Rifle is very good and there is good use of metal where it needs to be like with the upper receiver, the inner and outer barrel, the bolt and other internal mechanical parts, the trigger, the safety, the rear fully adjustable sight and the full size drop out metal magazine that holds the Gas and the Airsoft BB's.
Realism: The KJWorks MK1 Carbine Green Gas Airsoft Rifle is based on real steel Ruger MK1 and looks very close to it for the most part. There is no blowback operation or bolt operation so that means that only a double action trigger is possible, this is a bit unfortunate since the real Ruger MK1 has an absolutely beautiful smooth and light single action trigger. On the positive side you can field strip the KJWorks MK1 Carbine Green Gas Airsoft Rifle just like the real version but you will need to remove the rear stock that covers the area you need to get to to field strip it.
Pros:
If you own a real Ruger 22LR you will be use to the design layout.
Adjustable rear sight for windage and elevation.
Metal hop-up for backspin tuning.
Full size all metal drop out magazine that holds the Airsoft BB’s and gas.
Satisfying trigger sound, sounds like a real firing pin a bit, not clanky like many other Airguns.
Full Metal upper and barrel.
Metal rear sight, bolt, trigger and magazine.
Non blowback helps with velocity and gas efficiency.
Field strips like original MK Series (will need to remover rear stock).
Cons:
No blowback so longer DAO trigger not like the real steel Ruger MK 1.
Some reviewers claim the hop-up is hard to adjust.
May be a bit too powerful for use in close quarters Airsoft games.
Comments:
The KJWorks MK1 Carbine Green Gas Airsoft Rifle is really just a modified MK1 Pistol by adding a longer barrel and rear shoulder stock to the pistol grip. I guess it is a good use of an already popular pistol design to give us a light weight and somewhat compact Airsoft sniper rifle for Airsoft games as it does have a fairly high velocity claim. Because of the high 450+ fps I would not recommend it to anyone playing in close quarters as it could injure other players so keep that in mind. If you are looking for a lower cost and fairly compact Sniper Rifle for some outdoor shooting, then it might be just the right pick for that. I am hoping my upcoming Field Test Shooting Video showcases it nicely so keep checking back for that Review Video down the road a bit.
Type: Multi-Ammo Pistol. Distributer:Alies Airguns. Model:GEM. Materials: Mostly metal with some plastic build. Weight: Barrel dependent. Total Length: Barrel dependent 3.5 inches (89mm) with BB and Airsoft Barrels. Barrel: Barrel dependent 2 inches (51mm) with BB and Airsoft Barrels Propulsion: 8 or 12 gram CO2 (12 Gram CO2 required adaptor sold separately). Action: Break Barrel / Single shot. Ammunition Type: 4.5mm Steel BB's / 6mm Airsoft BB’s (Can also purchase .117 Pellet, .50 & .43 cal Paintball, 9mm Arrow Barrels) Ammunition Capacity: 1 round. FPS: up to 400 using 4.5mm Steel BB’s.
Trigger Pull: The Alias GEM Multi Ammo Mini CO2 Airgun is a true single action only pistol that requires the pulling back of the hammer for each shot. This does give it a very nice trigger action that is short to medium in length with an easy release. The makeup is about medium for a single action trigger with a bit of an unpredictable release as there is no point in time that you feel it breaking on you. This can be good or bad depending on how you like your triggers as it is hard to tel when ti will actually release but the smoothness makes it a good trigger overall in my opinion
Accuracy: I have not shot the Alias GEM Multi Ammo Mini CO2 Airgun at all so far as it requires 8 gram CO2 and so I am waiting on the 12 gram adaptor for it before I can even give it a quick try. I will be making a full Field test Review for it swapping between a bunch of barrel options to see how each barrel adn ammo type performs in terms of power adn accuracy so stay posted for that video down the road a bit.
Build Quality: Build quality for the Alias GEM Multi Ammo Mini CO2 Airgun is very good with an almost all metal build other than the front and back sights, the trigger, the safety adn the barrel release. I kind of wish these parts were also metal as the rest of the Airgun is so pristine! The weight of this pistol feels very dense as it is so small yet has a good weight. The fir and finishes is all very good with the chrome finish on most parts and even the inclusion of what I believe are real gem stones on each side of the grips. The mechanical parts are also smooth and precise.
Realism: As far as I know the Alias GEM Multi Ammo Mini CO2 Airgun is not a replica of any production real steel gun that I am aware of. It looks to me like some sort of futuristic compact laser pistol? In terms of gun shape and what we are use to in terms of what a gun is it checks most of the boxes but it is it’s own design for sure.
Pros:
Super compact design, probably the smallest Airgun available.
Multiple quick change barrel and ammo options.
Mostly all metal build, very high quality materials.
Nice smooth and light SAO trigger.
Able to also use 12 gram CO2 with optional adapter.
Comes in different colors (red or black).
Decent velocity up to 400 fps depending on ammo type.
Eye-catching chrome and gemstone detailing make it a collector's piece.
Cons:
Uses 8 grams CO2 standard, harder to get and more expensive.
Only a single shot, not an action shooter.
On the pricy side at over $300 Canadian.
Comments:
I have to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not going to be for everyone as the price point is up there a bit for such a simple single action gun. That said it is super unique and the quality adn design is top notch. It may in fact be the smallest CO2 Airgun on the market adn you can literally put it in your front pocket easily. That combined with all the barrel and ammo options makes it super flexible if you plan on shooting a variety of different ammo types. Like I said in the video you may even be able to get away with buying it as a gift for your wife or girlfriend since it technically can be defined as being jewelry with the imbedded Gem stones in the grips. That may be a bit of a stretch unless she is also an Airgun fan.
This video was made right at the end of December 2024 but I am posting it in the new year so we will call it a late December video… That makes two Mystery Box Videos for December 2024 which means a lot of new products on my plate to review this new year. Hopefully I can get a bunch of them done before I head out to SHOT Show this year in a couple of weeks as I will have a lot of videos and interviews to post for SHOT Show as is always the case when I get back.
At least in this unboxing videos I can give you an idea of some of the new products we have in the Replica Airgun online Stores usually in both the Canada and the US Replica Airgun Stores. In this Unboxing Video I received 5 new products to show you. A Less Lethal Pistol and Spring Piston BB Pistol from Umarex, a Carbine Airsoft Rifle from KJWorks, a Multi-barrel super compact Airgun from Alias Airguns out of Canada, and Bug Exterminator from a company called Skell Inc. Here are some of the basics for each of them:
Type: CO2 Air Pistol. Manufacturer:Alias Airguns. Model: Gem. Caliber: Multi Barrel Comes with 4.5mm Steel BB adn 6mm Airsoft. Power Source: Single 8g CO2 Cartridge or 12 gram with adaptor. Magazine Capacity: Single shot. Buy the .50 Caliber Paintball Barrel Set: AA1002. Buy the Rocket Barrel Set: AA1003. Buy the 12 Gram CO2 Adaptor: AA1004.
Type: Spring Air BB Pistol. Manufacturer:Umarex. Model: DSX 45. Ammo Type:4.5mm Steel BBs. Power Source: Spring Air. Magazine Capacity: 13 Rounds (Rapid Load) with 200 Round Reservoir.
Type: Pump Action Bug Exterminator. Manufacturer: Skell Inc. Model: Bug-A-Salt 3.0. Ammo Type: table Salt. Power Source: Spring Air. Magazine Capacity: a bunch.
This was a really fun Unboxing Video for me as I received something I feel a lot of Canadians might be really interested in protecting yourself in Canada is not a right especially if you use lethal force. So having a less lethal option is a really good idea.
Let’s get into what I found in this most recent Mystery Box in order of appearance…
The first item I unboxed was the KWC SP2022 CO2 NBB 4.5mm Steel BB Pistol. A pretty basic 4.5mm CO2 BB Pistol mostly made out of plastic but with a full size 21 round drop out metal magazine that does help a lot to add some much needed weight to this Airgun. It uses standard 12 gram CO2 with a claimed velocity of 450 fps.
Probably the most exciting item I pulled out of this months Mystery Box was the Gen2 Umarex P2P HDP 50 Rubber Ball purpose built Less-lethal solution for personal and family protection. Most of the similar Rubber ball Less-lethal Airguns I have tested generally do not pack enough punch to really be much of a deterrent in my opinion but the Gen2 Umarex P2P HDP 50 has a claimed 495 fps and when I tested it out after making this video it defiantly has some power. I would not want to be at the receiving end of this product especially in close proximity. The Gen2 Umarex P2P HDP 50 uses a traditional 12 gram CO2 and holds 6 rounds of rubber ball or powder ball, it does come with 10 of each to get you started.
Next I took a look at three KJWORKS Airsoft Pistols all of which came with CO2 Magazines, extension barrels and thread on tips. The KJWORKS KP-19, the KJWORKS M9A1 TBC, and the KJWORKS KP-13 TBC. As expected with KJWORKS Airsoft Guns, they looked really good and will be a joy to review and test out.
Last out of the Mystery Box was a new product from Umarex, a full sized Marlin Cowboy Lever Action BB Rifle in the style of the classic Red Ryder BB Gun but as mentioned in a larger size more suitable for an adult. Hey why do the kids get to have all the fun? The Umarex Marlin BB Rifle holds 650 rounds in its BB hopper and has a claimed fps pf 300. It also has an adjustable for elevation peep sight in the back with a metal lever and a Classic Faux Wood Finish.
You may have noticed a lack of Airgun Video Reviews last week? That is because I went on vacation with my buddy Steve to Oceanside California where we stayed at the WorldMark Oceanside Resort. We spent a full week in Oceanside visiting the surrounding beaches, Mission Beach in San Diego along with Laguna Beach and Newport Beach.
We had a really great time, I was able to capture a variety of video of some of our experiences using my Samsung Galaxy S24 Ultra, My DJI Neo AI and FPV Drone, and my Meta Glasses. I have put together a video to share Oceanside California and surrounding area in a mostly chronological order for your viewing enjoyment.
I am back to making Airgun Review Videos so stay posted for those videos coming shortly…
Type:AEG Airsoft Rifles Manufacturer: G&G. Model:RK Beta AK Materials: Mostly metal/some plastic. Weight: 7.1 pounds (3.2 kg). Total Length: 28.5 inches (72.4 cm). Barrel: 9 inches (22.9 cm) barrel non-rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: 6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 600 round magazine. FPS: 390 fps.
Trigger Pull: The trigger pull on the G&G RK Beta AK AEG Airsoft Rifle is short and light as it is basically a simple electric on/off switch that completes a circuit and tells the motor to turn, which activates the cycling of the spring piston. For this reason there is no real creep or feel of a release. When you get to a preset point in the trigger, the motor circuit is closed allowing for either semi or full auto, depending on your selector switch position at the time.
Accuracy: I will be making a dedicated Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle to find out what the actual velocity is in fps. I will also test what kind of accuracy I can get shooting a paper target in both semi and full auto from 30 feet away. For now I have no idea what to expect but as this is most certainly not a cheap Airsoft AEG Rifle, I am hoping for good results to justify the higher price point.
Build Quality: The build quality of the G&G RK Beta AK AEG Airsoft Rifle is very good, G&G Airsoft Rifles in general are well built. You are going to find metal in most of this AEG Airsoft Rifle including the receiver, dust cover, trigger guard, trigger, selector switch, barrel, front and rear sights and the magazine. The only plastic to be found will be in the pistol grip, rear stock and 3 of the picatinny rails. Fit and finish is very good but the stock and pistol grip material does seem to show scratches really easily.
Realism: The G&G RK Beta AK AEG Airsoft Rifle is a 1 to 1 scale Airsoft reproduction of the AK 47/74 in a compact modernized version. I don’t believe it is based on exactly one specific brand or type of AK 47 or AK 74, but is more or less a stylized version designed and built by G&G. The G&G RK Beta AK AEG Airsoft Rifle does have a lot of metal and weight to it adding to the realism and most of the mechanical parts work similar to a real steel version of an AK 47/74. G&G has added a bit of a bolt cycle motion with a motor that actuates it to some degree but this is not like the look and feel of a real internal bolt from an actual AK 47/74. Still a nice touch.
Pros:
Lots of metal in construction where you need it with good overall weight and feel.
6 rail attachment options up front for lots of mounting positions.
Left side option to attach an additional AK style sight mount.
Adjustable front sight for elevation.
Nice and compact for easy maneuverability.
Rear stock has lots of room for battery sizes and options.
Dust cover comes off for easy access to internals.
G&G high quality build.
Comes with sling mounting options.
Super easy hopup adjustment slider.
Nice high capacity 600 round metal magazine.
No orange tip.
Cons:
Rear sight is all but useless.
Stock and grip scratch really easily.
Priced on the higher side.
Comments:
The G&G RK Beta AK AEG Airsoft Rifle may be priced a bit on the high side for some people but it is a solid AEG Airsoft Rifle and it seems there are not as many AK options out there so it is nice to have an offering from G&G. I like the almost full metal construction and I find the modernized styling and compact size to be appealing and would make it a great option for CQB Airsoft games. I am not sure what is going on with the rear site, as it looks like it is a sight, but does not have the sight grove in it? Maybe I am missing something here but other than opting to put a red dot way up front, your only other option is to put an AK side rail and mount a sight on the rear just above the metal dust cover. I am hoping when I make my Field Test Shooting Video for the G&G RK Beta AK AEG Airsoft Rifle, it performs well for me to justify the higher price point.
My Vimeo Table Top Review for the G&G RK Beta AK AEG Airsoft Rifle:
In this Indoor Field Test Shooting Video, I put the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol through my usual performance shooting test by first finding out what the velocity is by shooting 5 rounds through my Chronograph using a fresh CO2 along with .20 gram Airsoft BB’s. I follow this up with a 10 round accuracy test, again using .20 gram Airsoft BB’s and shooting at a paper target setup 30 feet down range, while seated on a stool in the back with my hands rested on a sand bag up front. This generally works pretty well and helps me get the most out the gun I am testing. If you are also interested in details and specifications than make sure to watch my Table Top Video I already made for the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol.
So how did the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol do in my testing? Not bad! Starting with the velocity fps test I shot 5 rounds through my chronograph with a brand new 12 gram CO2 cartridge and while EMG claims around 400 fps, I only averaged 321 fps with my fastest shot hitting 323 fps and my slowest shot hitting 318. So relatively close in terms of fps but not close to the 400 claimed fps. Totally fine for Airsoft games, perhaps in super hot temperatures, it can do better but in standard room temperatures this is what I got.
Next up I tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol’s accuracy from 30 feet away and put 10 rounds down range as best as I was able to do with my slightly aging eyes. I was happy with the results with most of the rounds staying within about 2 inches of each other and just slightly to the right of the bullseye, but pretty much perfect in terms of elevation. There where a couple of rounds that came outside of the base 2 inch grouping, which increased the grouping to about 3 inches total.
I am a huge 1911 fan and so a 2011 design only tuns up the dial that much more. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol performed without a glitch for me and I love the extra heft and snappy blowback action along with the crips light and short single action 1911 trigger. I was a bit surprised by the lower 323 fps velocity, but to be honest this is more than a capable velocity for a combat close range Airsoft Pistol. The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a real looker for sure, it just needs that eye soar of an orange tip removed to perfect its look. If you like the look and feel of a 1911/2011 in your hand, and if stainless steel is your color of choice, then I would say go for this one.
Type: GBB Airsoft Rifle Manufacturer:Umarex / KWA Model:HK 416 A4 Materials: Mostly all metal. Weight: 7.75 pounds (3.5 kg). Total Length: 31.1-34.4 inches (79-88cm). Barrel: 15.4 inches (39cm) non rifled. Propulsion: Gas Blowback. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity:30 round magazines. FPS: 400 fps.
Trigger Pull: The trigger pull on the Umarex HK 416 A4 GBB Airsoft Rifle is typical of a single action only trigger found on the AR platform. It has a very slight take up with just a little bit of resistance part way, and then a predictable light break. The reset has a noticeable click to it and it is also very short allowing for very fast semi auto shooting. Of course you can always put it in full auto and let her rip, but you will have to restrain yourself since there are only 30 rounds in the magazine like you would find in a standard AR.
Accuracy: Like most of my Table Top Videos, they are made prior to shooting the gun I am reviewing, so we are all going to have to wait until I make my official Field Test Shooting Video for the Umarex HK 416 A4 GBB Airsoft Rifle. Where I will be testing out the velocity in fps using my Chronograph, and I will also shoot the Umarex HK 416 A4 in both semi auto and full auto to see how tight of groupings I can get at least at 30 feet away. I fully expect the Umarex HK 416 A4 GBB Airsoft Rifle to perform well as this is a very high quality product made by KWA.
Build Quality: The Build quality on the Umarex HK 416 A4 GBB Airsoft Rifle is outstanding with metal everywhere you would find it on a real steel AR. Of course the rear adjustable stock is plastic. Because of all the metal front to back, the Umarex HK 416 A4 is on the heavy side at 7.75 pounds, so packing it around all day may be a bit tiring but well worth the joy and pride when holding it. Fit and finish is also excellent, you will pay more for this GBB Airsoft Rifle but the material are nothing but quality.
Realism: The main thing you get from a GBB Airsoft Rifle over an AEG Airsoft Rifle, is not just quality components and build materials, but the user experience which is so much more realistic than shooting an AEG. The Umarex HK 416 A4 GBB Airsoft Rifle just feels so real in weight, how the controls all work, the full cycling of the bolt with a nice heavy and snappy blowback recoil on your shoulder. Even the way the buffer tube spring rings after each shot just makes this GBB Airsoft Rifle a joy to shot and experience. Sure it only holds 30 rounds per mag and shot consistency will vary depending on your shooting environment as all gas guns can be temperamental in colder weather. That said, a real AR does not hold 500 rounds in a mag and they can also be a bit finicky on the battle field.
Pros:
It’s GBB, love the realism of GBB Airsoft Rifles, it doesn’t get any more fun.
Tons of metal all over this rifle weighing in at almost 8 pounds.
Lots of accessory mounting options with the Precision CNC machined Quad Picatinny top side and bottom rails.
Full adjustable metal pop up sights.
H&K Lisence via Umarex.
6 position adjustable AR compatible rear stock.
Trigger feel is awesome, feels like a real steel AR trigger, you can’t even get close with an AEG.
Ambidextrous selector switches for left and right handers.
The threaded barrel can attach a silencer or other flash hidders.
All parts work just like the real steel version.
Can filed strip just like a real steel AR.
Cons:
Low magazine capacity as compared to an AEG.
Will be subject to cold weather conditions and cool down.
Very expensive to have and own such realism.
Comments:
The Umarex Umarex HK 416 A4 GBB Airsoft Rifle is for sure not going to be for everyone as it is with out a doubt a very expensive Gas Blowback Airsoft Rifle. It may not even be your best option out on the Airsoft Field, as more than likely you are going to get out gunned by everyone else using an AEG with their 500 round magazines and endless torrent of BB’s coming at you. If you just want the most realistic Airsoft Experience, than look no further than the Umarex HK 416 A4 GBB Airsoft Rifle, as it does not get more realistic than this and if you want to replicate your real steel AR perhaps for training and practice sessions, than there is no way you can beet the Umarex HK 416 A4. For those with deep wallets that want the ultimate and most realistic AR you can get, you can’t go wrong with the Umarex HK 416 A4 GBB Airsoft Rifle.
My Vimeo Table Top Review for the Umarex HK 416 A4 GBB Airsoft Rifle:
Since I use all kinds of cameras for the making of my Replica Airguns Videos including the HoverAir X1 Flying Camera Drone, I though it would be a good idea to share my thoughts on the new DJI NEO Mini Drone which Is replacing my HoverAir X1 at least for now. This is not an unboxing first impression video with basic out of the box test videos. This video is going to go over how the DJI NEO actually performs comparing to the HoverAir X1 and other DJI dedicated Drones and FPV Drones.
I have used different drones to do everything the DJI Neo claims to do, but can the DJI NEO really do it all and if so can it do it all as good or good enough?
The short answer is yes it can do it all but will it meet your specific expectations?
I don’t claim to be a pro at any of the things the DJI Neo can do, but I have at least some experience using the HoverAir X1 for the past year which is a similar experience as what you get with the base model DJI NEO out of the box.
I also have owned and flown standard DJI Drones with remote control setups for taking those cinematic flying around smooth shots. The DJI NEO out of the box can do limited distance and height using your DJI NEO with your phone in Manual Mode. You can also purchase the DJI NEO Fly More Kit that comes with the RC-N3 Controller and unlock almost limitless distance and even more features out of your DJI NEO.
I owned the first generation DJI Avata and flew it with the motion controller similar to what you can do with the DJI NEO when combined with the DJI Goggles 3 and RC Motion 3 Controller. That experience really got me more interested in experimenting with FPV drones.
I now own a bunch of FPV drones in various styles and sizes and use them with my DJI Goggles and Manual Controller to fly in full Manual Acro Mode for a true fps experience.
DJI NEO Compared to the HoverAir X1.
For the most part they both perform a lot of the same Selfie Camera shots like Follow, Droney, Circle, Rocket, Spotlight, Direction Track and some more specific to each unit.
You can fly them without a controller or even your phone by simply turning them on, selecting your flying mode and pressing a button.
They both can use your phone as a simple virtual controller to fly them around in manual mode and get some cool more cinematic shots.
They both can use your phones built in Microphone to record audio while taking out the drones propeller noise.
They are both well under 250 grams closer to 120 to 130 grams.
They both have a one axis gimbal setup.
The cameras in both are comparable. 2.7k 30fps for the HoverAir X1 and 4k 30fps for the DJI NEO.
Both have full prop guards and are very crash resistant.
Where does each one shin in my opinion?
HoverAir X1:
Starting with the HoverAir X1 it came out first and so more of the bugs and settings have been worked out, and you have to give them credit for being first here as DJI did a lot of copying if we are being honest.
The HoverAirX1 has more ability to change settings using the buttons on the drone without going into the phones software to do it.
The HoverAir X1 is better at staying in place when inside and in lower light situations.
The HoverAir X1 can record in portrait mode for social media content.
The HoverAir X1 can use just about any external USB or BT Microphone for recording to get better audio than just by using you phones internal Microphone. The DJI NEO only gives you the option to use their DJI 2 Microphone which starts at $300 Canadian.
The HoverAir X1 can be folded, making it much more portable.
The HoverAir X1 at this time can track a little bit faster than the DJI NEO, but that can change with a softer update in the future.
The HoverAir X1 does not restrict where you can fly as there is no Geo Fencing. The DJI NEO will not give you much of a problem here when in solo mode or when connected to the DJI Fly App without any controllers or Goggles, but when connected to addition DJI accessories, you will have to factor in Geo Fencing limitations and work arounds which can be really annoying.
DJI NEO:
Moving on to the DJI NEO, the NEO has voice command as long as the DJI Fly App is open and your phone screen is on, very useful when wanting to change the drones distance and height in modes like Follow and Direction Tracking.
The DJI software is a bit more intuitive and the Manual Mode allows for much smoother control of the DJI NEO and further distances and height. (60m)
The DJI NEO records in 4k which is a bit better than the HoverAir X1 2.7k, but not by much. There is room for improvement with the NEO in terms of software updates but we will see what DJI does in terms of improving video quality and hopefully the ability to tweak the video settings.
The DJI NEO has built in GPS which allows it to stay in position outside better and even go over water and steep drop-offs.
The DJI NEO has an 18 minute battery run time versus the HoverAir X1 10 minute battery run time. (In real life it is more like 15 versus 8 minutes), so almost double per battery.
The DJI NEO is much more than a one trick pony with its ability to be much more than a Flying Selfie Camera Drone. It can be a full fledged remote controlled drone or even a true FPV drone when adding the additional accessories to it.
And that brings us to the point in this video where I talk about if the DJI NEO can really perform good enough to possibly replace your stand alone drone or even your FPV Drone? And again it depends on what your expectations are and what your end use in these modes is.
In terms of a stand alone drone, when the DJI is connected to the RC-N3 Controller, it can do much of the same tasks you would expect and get many of the same shots. Because of its size it will not be as good in stronger winds and it also does not have the power or speed of a larger dedicated Drone. Most of the DJI Drones also have higher quality cameras with larger sensors and 2 or even 3 axis gimbals with better stabilization. They also have much longer battery run times so you can go farther and longer with them. That said the DJI NEO may be good enough for a non-pro user to get the shots they are looking for.
The DJI NEO has been compared to the DJI Avata series and it does look a lot like a smaller version for sure. In terms of flying ink a DJI Avata, again it is smaller and less powerful so it will be slower and more prone to weather conditions. The camera systems on even the DJI Avata 1 is much better than the DJI NEO with full 4k 60fps ability and the DJI Avata 2 camera is even better than the Avata 1 camera.
As an FPV Drone you can strap on a set of DJI Goggles 3 and and instead of using the Motion Controller 3, you can connect to the RC Motion 3 Controller and get full manual mode FPV flying and hit speeds as high as 60km/h. You do have to be careful as the DJI NEO is not really a freestyle drone, if you push it too hard it will washout and go out of control potentially crashing, especially if you are close to the ground and it does not have time to recover. That said it is a lot of fun to fly if you fly within its limitations.
Some tips when using the DJI NEO based on my experiences:
Record in 4k for best quality except when in FPV Manual mode as the faster motion of FPV flying requires more frame rate speed to capture all of the motion without getting video jitter. Your feed in the DJI Goggles will look a lot better in 1080p 60fps as 1080p is the native resolution and 60fps is much smoother and allows for easier viewing while flying.
Do not use the DJI NEO inside in low light, it simply does not work very well in low light inside and will most of the time just land.
When using a remote like the RC-N3 or the Goggles 3, lower your video sharpness to (-2) for better looking video.
To fly in restricted GEO Zones you will need to go online and make a license request on the DJI Fly-Safe website and then you will need to treansfer that request license to your drone using the DJI Fly App while connected to the DJI NEO with with an internet connect. A bit of a process but after a few times you get the hang of it. I was not able to unlock a Geo Zone on location while in the app even with an internet connection. Hopefully this gets fixed down the road.
Here we go with another unboxing video this month, and this is a big box, so no doubt the mystery items are going to be big too! As always with new products, I will be following up with dedicated Table Top and Field Test Videos for each of them so make sure to check down the road for those videos for a lot more information and actual performance results…
Don’t look below if you want to just watch the video and be surprises by what’s inside the mystery box but if you want a quick peak before hand then checkout the basic specs below for all three new items I will be reviewing soon.
Type: GBB Airsoft Pistol. Manufacturer: Distributed by EMG. Model:SAI 2011 DS 4.3. Materials: Mostly metal (Aluminum) and plastic. Weight: 1.94 pounds (878 grams). Total Length: 8.25 inches (210mm). Barrel: 4 inches (102mm) metal rifled. Propulsion: CO2 x1. Action: Semi auto Blowback, SAO trigger. Ammunition Type: 6mm Airsoft BB’s. Ammunition Capacity: 30+1. FPS: Claimed 380-430.
Trigger Pull: The trigger pull on the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol like what you would find on a traditional 1911 style pistol so it is Single Action Only and is nice and short and light in weight. Being a single action pistol for your first shot you will need to pull back the slide to chamber a round into the barrel which will also cock the hammer for you. the blowback action will cycle the slide for you from that point on automating the action.
Accuracy: I have not made my Field test Shooting Video or even tested out the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol yet or even shot it at all so I can not comment on the performance other than the claimed velocity of (380-430 fps) which does seem a bit high to me? My plan is to have this info available next week when I make my Field test Shooting Video so stay posted of that video coming out shortly…
Build Quality: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol is a well made Airsoft Pistol with quality materials throughout. You will find a machined aluminum slide an aluminum frame and a full metal drop out magazine. The barrel is Titanium Nitride Coated and the only real plastic parts I could find would be the grips, the gas tube and the hop-up wheel. The stainless coating on this Airsoft pistol looks fairly thick and so should stand up over time with less wear showing.
Realism: The EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol to me is not a true 2011 design as it does not have the once piece grip/trigger guard design found in 2011 pistols. It is double stack so that fits with the naming convention but I would say it is more like a combination of the Salient Arms SAI Red and SAI Red H. It does check all the boxes for realism in terms of function, looks and feel with all the working parts you expect on a Replica Airsoft Pistol including being able to fully field strip it.
Pros:
Superior Performance and 1:1 Scale Functionality.
Machined Aluminum Alloy Frame and Slide.
Rugged Reliability without sacrificing Weight.
Officially licensed by Salient Arms International.
Front and Rear Combat Style Sights with integrated Forward Fiber Optic.
Machined Anti-Glare Slide Top.
Ambidextrous Safety and Squared Trigger.
Titanium Nitride Style SAI Barrel for added durability.
On-Frame Integrated Accessory Rail.
Skeletonized trigger and hammer.
Options of both Green Gas and CO2 Magazines.
Deep Engraving with Real Steel Training Weapon Grade External Finish, Look, and Feel.
Cons:
Has orange barrel tip. But can be removed with some work.
No white dot or fiber optics on rear sight.
Not really a True 2011 in design as the name suggests.
Comments:
I am a huge 1911/2011 fan and so the EMG SAI 2011 DS 4.3 CO2 Blowback Airsoft Pistol really appeals to me. I like the compact design of the EMG SAI 2011 DS 4.3 yet it has a nice high capacity double stack magazine that gives this Airsoft Pistol a bit more girth in the hands which for me is OK as I have pretty large hands. I like that you have the option of shooting CO2 or Green Gas depending on what magazine you are using. This version comes with a CO2 Magazine, but you can purchase a green gas magazine if you prefer using gas over CO2. I like the modern look with the gold barrel and skeletonized trigger and hammer. The price is on the higher side but sometimes you have to pay a little bit more to get the additional quality and to have a gun that really stands out.
