View fullsize

We didn’t catch this one at the Steambow booth, we were out at the SHOT Show indoor range checking out Steambow again, Tyler walked us through their brand-new-for-2026 B08: a magazine-fed .68 caliber ball launcher/crossbow that’s just starting to hit availability.

• New B08 .68 cal “ball launcher” platform (2026): This is a .68 caliber system designed to run .68 spherical projectiles (paint, foam/nylon, and pepper/irritant-type balls were all discussed as compatible options, depending on local rules).

• 8-shot, removable, pre-loadable magazine: The B08 uses a spring-fed 8-round magazine that inserts at the front. Tyler’s demo made it clear you can pre-load multiple mags and keep shooting quickly.

• Simple, repeatable action (easy to learn fast): The manual of arms is very “repeat-and-go”: load the mag, cock it, shoot, then cycle and repeat. Steambow describes the system as their familiar AR-Series quick-tilt/quick-clamp style for fast reloading.

• Ships mild, but can be upgraded for more power: The one I tested was using a 35 lb limb, but it’s built to accept other AR-Series limbs (stronger options sold separately). Tyler specifically said swapping to a much heavier limb can turn it into a high-velocity setup (he referenced up to a 150 lb limb and around 300 fps in his talk).

• Projectile flexibility is the whole point: If you already have .68 cal paintballs or similar at home, that’s the target “ecosystem” this is built around (so long as they’re spherical).

• Important safety + legal reality check: Steambow is very explicit that once you move beyond the “low power + soft balls” envelope, the B08 can become very dangerous, they warn that harder/heavier projectiles (including steel balls) raise risks like severe injury/lethality and ricochets, and that irritant/pepper-type rounds may be legally restricted depending on country.

Tyler’s range demo made the main selling points obvious: magazine speed, easy operation, and a huge range of .68 ball options. If we can get it lined up for Canada, it looks like a very versatile multi use platform, especially for anyone who wants .68 cal fun adn then some, without relying on CO2 or HPA.

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

View fullsize

In this Field Test Shooting Video I take a look at the KJ Works KP-19S. I’ve reviewed the KP-19 in the past, so this one should perform similarly, but it’s been a while and I wanted to get this one out for a proper range session.

I’ve already done a tabletop / close-up video for the KP-19S covering the specs, features, and up-close details, so if you want the full walk-around and all the technical info, make sure you check that out first.

For today’s session, I focused strictly on performance in the same basic field-test format: velocity testing, then a 10-shot accuracy group at 30 feet, and finally some overall shooting impressions.

Velocity Testing (Chronograph)

For the chronograph test, I ran 0.25g Airsoft BBs (not 0.20g), so expect the readings to come in a bit lower than what many people quote online.

My chronograph also decided to be difficult today, throwing “Error 2” messages and not registering shots consistently, so I had to keep working at it until it finally started giving me some readings.

Once it cooperated, I got five velocity readings:

• 312 fps, 304 fps, 293 fps, 288 fps, 284 fps:

• Average of 296 fps

A couple notes to keep things fair:

• If I had started the test with zero shots fired beforehand (the way I normally try to do it to maximize “fresh CO2” performance), the first shots could be a bit higher.

• Because this was with 0.25g BBs, if you ran 0.20g BBs, you’d likely see higher numbers, potentially into the low-to-mid 300s depending on conditions.

• This model also includes an extended barrel option that can push velocity higher, but I didn’t test it that way because most people run the pistol in its standard configuration (without a long exposed barrel sticking out).

Accuracy Testing (30 Feet)

For the accuracy test, I put a paper target at 30 feet and fired 10 rounds. The nice thing here is that the pistol should lock back on the last shot, so it makes it easy to confirm you’re done without having to count.

Results were excellent for a quick out-of-the-box test:

• With the exception of one flyer, everything was within about an inch

• The group was well-centered left-to-right

• Elevation was also very good without any sight adjustments

There isn’t much you can do for sight adjustment on this one unless you add a laser or optic, but you can tweak elevation slightly via hop-up, depending on your setup.

View fullsize

Final Thoughts

This pistol performed really well for me today.

The KJ Works KP-19S has that 1911-style trigger feel, light, short, and responsive, paired with a snappy blowback that makes it fun to shoot. Velocity was consistent once the chronograph started behaving, and the 30-foot grouping was far better than I expected without any tuning.

Aesthetically, it’s also a great-looking gun: a tactical, modern two-tone style with a double-stack magazine look that gives it that “2011 / hi-cap tactical 1911” vibe. If that’s the style you’re after, the KP-19S is a strong choice.

It should also work with most KJ Works tactical 1911 / double-stack style magazines, so if you already own similar KJ Works pistols, you may be able to mix and match mags. You can also run green gas magazines, but velocity will generally be lower. If you do choose to run the extended / threaded barrel setup, you can hide it with a mock compensator, but it will turn the pistol into a longer, bulkier package. Personally, I prefer it in the standard configuration.

Where to Buy

You can check this pistol out in our Canada Store (and possibly the US Store, depending on availability). I’ll include links where applicable, along with general store links where you can browse airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading, don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram. And yes, we’re back on YouTube after being gone for years. We’re re-uploading older content from Vimeo manually, so it’ll take a bit to get everything restored, but all new videos should be going up on YouTube as well going forward.

View fullsize

I had the chance to take the KWC 18 CO2 Blowback BB Pistol out for some shooting today to see how it performs. It’s a Glock-styled 4.5mm steel CO2 BB pistol with full blowback and selectable semi and full auto. It’s not an officially licensed Glock, but if you own (or have shot) Glocks, the controls and overall feel will be instantly familiar.

I’ve already done a close-up tabletop video for the KWC 18 covering specs and details, so if you want the up-close visuals and feature breakdown, make sure to check that out first.

For this session I concentrated solely on performance: a quick 5-shot chronograph run in semi-auto to record velocity, a 10-round semi-auto group at 30 feet, and then a full-auto mag dump to get a practical feel for controllability and “real world” accuracy—right out of the box (no tuning).

Velocity Testing (Chronograph)

For the chronograph testing, I ran five shots in semi-auto with a brand new CO2 in the magazine. The numbers came in at 293, 294, 282, 290, and 282 fps, for an average of about 288 fps. The spread was tight and the pistol felt extremely “snappy” while shooting, there’s a lot of pop in the blowback and you can feel it cycling hard.

One important note: this is a single-action-only style system, so you do need to rack the slide to cock it before it’ll fire (ask me how I know…).

View fullsize

Accuracy Testing (30 Feet)

For accuracy, I put a paper target out at 30 feet and fired 10 rounds in semi-auto. After a quick adjustment (the pistol was hitting very low at first), I aimed higher and got a roughly 3-inch grouping. The group was well centered left-to-right, but the pistol was still shooting noticeably low overall.

This is the kind of thing you’d simply keep in mind while shooting, and depending on the setup, you may be able to tweak elevation a little (but with steel BBs at short range, don’t expect miracles).

Full Auto (Mag Dump)

Then I loaded up and did a full-auto mag dump. As expected, it was basically spray-and-pray at 30 feet. The rate of fire is insane, and between that and the strong blowback, it was extremely difficult to keep rounds on target. I may have only landed a couple hits on paper.

Final Thoughts

All told, the KWC 18 is a really fun Glock-style blowback BB pistol if you want something that feels familiar in the hand and delivers a crisp trigger with serious recoil-like blowback. In semi-auto it’s manageable (even if it shoots low out of the box), but in full auto, at least at 30 feet, it’s more about the fun factor than practical accuracy.

• Buy the 18 CO2 Blowback Steel BB Pistol in Canada

• Buy 18 CO2 Blowback Steel BB Pistol in the US store

View fullsize

In this Table Top Review, we’re taking a detailed look at the KJ Works KP-19S CO2 Blowback Airsoft Pistol. I’ve already reviewed the standard KP-19 in the past, and while the two pistols share a lot in common, there are some important differences between the KP-19 and the KP-19S that are worth covering.

I’m not entirely sure what the “S” officially stands for, possibly Sport—but interestingly, I’d actually argue that the non-S KP-19 is the more competition-oriented version, especially for IPSC-style Airsoft shooting. That said, the KP-19S still offers excellent performance, strong build quality, and a feature-rich design.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow later.

This pistol is currently available in our Canada Replica Airguns store, and if a similar model is available in the US store, links will be provided in the video description.

View fullsize

Specifications:

• Manufacturer: KJ Works

• Made In: Taiwan

• Power Source: 12g CO2

• Ammunition: 6mm Airsoft BBs

• Action: Semi-auto, full blowback

• Trigger: Single-action, skeletonized, adjustable (1911-style)

• Magazine: Full-size dropout metal magazine, 25-round capacity

• Weight: 1.96 lbs (890 g)

• Overall Length: 9.84 inches (250 mm)

• Inner Barrel Length: 4.25 inches (108 mm)

• Claimed Velocity: 366+ FPS

• Hop-Up: Adjustable

• Rail: Under-barrel Picatinny rail

• Sights: Fiber-optic front and rear

• Safety: Ambidextrous

• Magazine Release: Reversible

• Threaded Barrel: Inner and outer threading

• Field Strippable: Yes (1911-style takedown)

The pistol includes a removable inner barrel extension, which may be required to reach the higher advertised FPS—something we’ll confirm in the upcoming field test.

View fullsize

In the Box:

• KP-19S CO2 Blowback Airsoft Pistol

• Full-size metal CO2 magazine

• Inner barrel extension

• Allen keys

• Small bag of Airsoft BBs

• Instruction manual (Usually!)

The pistol comes packaged in a basic cardboard box, but all essential accessories are included.

KP-19 vs KP-19S – What’s Different?

The KP-19S shares most of its core design with the standard KP-19:

• Same frame, grip, slide profile, trigger guard

• Same skeletonized trigger and hammer

• Same magazine compatibility

View fullsize

Key Differences

• KP-19 (Non-S):

  • Flared magwell

  • Compensator

  • Removable rear plate for mounting a red dot

  • More competition-oriented configuration

• KP-19S:

  • No flared magwell (cleaner, more streamlined look)

  • Fixed rear sight

  • Two-tone appearance

Performance between the two should be nearly identical, and if you’ve already watched the field test for the standard KP-19, expect similar results from the S version.

Walk-Around & Handling:

The KP-19S is a large pistol with a fairly wide grip. Shooters with smaller hands may find it bulky, but balance and weight distribution are excellent. At just under two pounds, it feels solid without being overly heavy.

Notable features include:

• Slide cutouts on the top and sides

• CNC-style gold/brass-colored fluted barrel visible through the slide

• Fiber-optic sights that are extremely easy to pick up

• Ambidextrous safety

• Reversible magazine release

• Dual threaded barrel system (inner and outer threads)

The full blowback action is strong, crisp, and satisfying, with excellent slide movement and reset.

View fullsize

Field Strip:

Field stripping follows a classic 1911 takedown:

1. Align the slide notch

2. Push out the takedown pin

3. Remove the slide assembly

Once opened, you gain easy access to:

• Inner barrel

• Recoil spring

• Hop-up adjustment wheel

Reassembly is quick and straightforward, making cleaning and maintenance easy.

View fullsize

Pros:

• High metal content with excellent weight and balance

• Strong, realistic full blowback action

• Excellent fit and finish typical of KJ Works pistols

• High-capacity 25-round metal magazine

• CO2 or gas compatibility (with appropriate magazines)

• Dual threaded barrel for accessories and extensions

• Bright fiber-optic sights (easy to acquire on any background)

• Short, light, adjustable 1911-style trigger

• Ambidextrous safety and reversible mag release

• Easy field stripping and hop-up access

Cons:

• Grip is wide and may not suit shooters with smaller hands

• Higher price point compared to similar KWC 1911 models

• Rear sight is not adjustable and does not accept a red-dot plate

  • Optics would need to be rail-mounted from underneath

View fullsize

Final Thoughts:

The KJ Works KP-19S is a high-quality, full-featured CO2 blowback Airsoft pistol with excellent build quality, strong recoil, and competition-inspired styling. While it lacks some of the modular competition features of the KP-19 non-s version, it offers a cleaner, streamlined look and the same reliable performance.

If you’re looking for a quality CO2 Airsoft pistol with a fantastic trigger, solid blowback, and premium construction, the KP-19S is a strong contender.

A full shooting and field test video will be coming soon.

Where to Buy:

🇨🇦 Canada:
https://www.replicaairguns.ca/kp-19s-hi-capa-gbb-airsoft-pistol

🇺🇸 United States:
https://www.replicaairguns.us
(A similar model may be linked if the KP-19S is not currently available)

View fullsize

More Reviews & Articles

Visit our blog for written reviews, photos, and additional info:
https://www.replicaairguns.com

Thanks for watching and reading.
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.

View fullsize

In this Table Top Review, we’re taking a detailed look at the KWC 18 CO2 Blowback Steel BB Pistol. This model is part of KWC’s long-running lineup of Glock-style pistols—some licensed through Umarex and others, like this one, produced without official Glock markings but clearly inspired by the platform.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow shortly.

I've reviewed many Glock-style CO2 blowback pistols over the years—Gen 3, Gen 4, Gen 5, Airsoft, Steel BB, full blowback, semi-blowback—you name it. KWC manufactures a large percentage of these frames and blowback systems, often for Umarex’s officially licensed Glock models. So while this KWC 18 isn’t a licensed Glock, it’s built by the same people behind many of the Umarex-branded models.

Let’s get into the details, compare it briefly to a couple of Umarex Glock versions, and then talk pros and cons.

View fullsize

Specifications

• Manufactured By: KWC – Made in Taiwan

• Power Source: 12g CO2

• Ammunition: 4.5mm Steel BBs

• Action: Full Blowback (Semi & Full Auto Selectable)

• Magazine: Full-size dropout metal magazine, 18 rounds (Model AAKC MM19)

• Trigger: Single-action-only style, short and light (Glock-like)

• Length: 203mm (8 inches)

• Barrel: 102mm (4 inches), smoothbore

• Weight: 1.7 lbs (771 g)

• Velocity: Up to 314 FPS under optimal conditions

• Sights: Front white dot; rear white half-rectangle

• Safety Systems:

  • Trigger safety (Glock-style)

  • Secondary safety located in the “serial number” plate under the barrel

• Hop-Up: Adjustable hop-up (rare for steel BB pistols)

• Rail: Under-barrel Picatinny rail for lights/lasers

• Field Strippable: Yes – Glock-style takedown system

View fullsize

In the Box

• KWC 18 CO2 Blowback Pistol

• 18-round full-size dropout metal magazine

• Allen key for CO2 tightening

• Small sample pack of steel BBs

• Instruction manual (loading, CO2 installation, hop-up access, takedown, jam clearing)

• Product guide / brochure

The packaging is similar to many Umarex Glock boxes—clean printed box with an internal molded insert.

View fullsize

Comparison to Umarex Glock Models

To give this pistol some context, here’s how it stacks up against a couple of current Umarex licensed Glock variants:

Umarex Glock 17 Gen 5 (Semi-Blowback)

• Has the MOS-style removable optic plate

• Features a semi-blowback system with shorter slide travel

• More efficient gas usage, higher FPS

• Double-action-style trigger (not Glock-accurate)

Umarex Glock 17 Gen 4 (Full Blowback)

• Full blowback with full travel slide

• Uses the same style of full-size dropout metal magazine

• Much closer in function to the KWC 18

• Fully licensed Glock markings

KWC 18

• Same full-blowback feel as the Gen 4

• No Glock markings (unlicensed)

• Adds full auto mode, which the Glock 17 models do not have

• Very similar weight, ergonomics, and trigger feel

• Slightly different slide shape, trigger guard, and frame cuts to avoid trademark conflict

If you’ve handled Umarex Glock models, this KWC 18 will feel instantly familiar.

View fullsize

Walk Around

The KWC 18 is extremely Glock-like in shape and ergonomics, with only small cosmetic changes:

• Slightly longer and differently shaped slide cuts

• Altered trigger guard shape

• Modified rail and frame geometry

• No Glock-branded markings anywhere

Controls are where you expect them to be:

• Slide catch/release on the left

• Trigger safety

• Takedown levers in the Glock position

• Selector switch for Semi / Full Auto just above the trigger area on the left side

• Under-barrel safety disguised as a serial number plate

Sights are classic Glock style:

• White dot front

• White “goalpost” style rear

The full-size dropout metal magazine fits tightly and locks back after the last shot. The slide feel is excellent—strong spring tension, clean metal-on-metal sound, no cheap clanking.

Field Strip

Field stripping is Glock-simple:

1. Lock slide slightly back

2. Pull both takedown tabs down

3. Slide comes forward and off

(Note: KWC pistols are often tight from factory, so the first removal may require a solid tap.)

Inside you’ll find:

• Full metal slide

• Return spring/guide

• Removable inner barrel

• Accessible hop-up wheel

• Fire control components including the semi/full auto mechanism

Reassembly is straightforward once parts are aligned correctly.

View fullsize

Pros

• Excellent weight and feel – solid, realistic, and well-balanced

• Full blowback provides snappy recoil and realistic slide movement

• Single-action Glock-like trigger is short, light, and crisp

• Full-size metal magazine for realistic reloads

• Semi & Full Auto modes (rare for BB pistols)

• Adjustable hop-up — unusual but useful for slight elevation tuning

• Field strippable, great for maintenance and realism

• Picatinny rail for lights/lasers

• Good trainer option for Glock owners thanks to similar ergonomics

• Minimal branding gives it a clean tactical look

Cons

• Full blowback reduces FPS and CO2 efficiency

• Full auto burns CO2 extremely fast

  • Expect maybe one strong magazine and a partial second depending on temperature

• CO2 cooling effects occur quickly during rapid fire

• Tight factory tolerances make the first field strip a bit stiff

• No official Glock markings (a con only if you want licensed branding)

View fullsize

Final Thoughts

The KWC 18 CO2 Blowback Steel BB Pistol is a very solid performer for anyone who wants a Glock-style CO2 pistol with full blowback realism—and especially for those who want the fun of full auto.

The build quality is strong, trigger feel is excellent, the slide operation is smooth, and the ergonomics match real Glock pistols closely enough to make this a legitimate training or plinking option.

If you already own Umarex Glocks, this model will fit naturally into your collection and may even share some compatible magazines (listed as AAKC MM19).

A full Shooting / Field Test Review is coming soon—these KWC/Umarex Glock-pattern pistols are always a blast to shoot.

Buy the KWC 18 BB Pistol

You can purchase this item from our Replica Airguns online stores:

• Canada

• United States

We carry a large selection of Umarex Glocks, KWC Glock-style pistols, airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading!
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.
More videos coming soon!

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine

View fullsize

I tested another Steambow model in this Field Test Shooting Video, the Steambow AR Series M10 Tactical Crossbow. Like my other Crossbow Field Test videos, I recorded the Chronograph velocity while I was shooting the target so there was no need for separate segments, everything was done in one go with four cameras rolling. I didn’t put a dedicated camera on the Chronograph because I wanted a camera on the target; my camera glasses generally pick up the chrono readings anyway. I only have so many cameras, but everything recorded as planned. If you want the full specs and a closer look at the M10, watch my dedicated Table Top video.

Steambow quotes about 190–200 fps for the AR Series M10. My six chrono readings were 189, 191, 189, 189, 190 and 191, which worked out to a 190 fps average. Using the included 142-grain, 6.5-inch aluminum bolts produced roughly 11.4 foot-pounds of energy, so both velocity and FPE were basically on target with Steambow’s numbers. That’s adequate for small pests, but humane shots always come down to accuracy, you’ll want head or shoulder placement, and I’m not ready to declare any compact crossbow a guaranteed solution for that. Test accuracy for yourself.

View fullsize

For accuracy I shot six rounds at a paper target 30 feet downrange from my usual seated in the back, hands rested up front shooting position. The first shot from the Steambow AR Series M10 Tactical Crossbow was a few inches low, so I adjusted my point of aim up and ended up with an impressive 1-inch, 4-shot group just left of center. One bolt missed the target entirely, could have been me or a bad bolt (I’ll blame the bolt on that one). Still, for a compact crossbow this was an excellent result, comparable to some pellet rifles.

Overall the Steambow AR Series M10 Tactical Crossbow performed really well. I like the cocking and bolt-feeding system, cocking is simple: shoulder the stock, press the release, then pull the front down using the foregrip for leverage. Even with the higher power of this model you don’t need a lot of strength, and with practice follow-up shots can be quick. I’d add a red dot to the rail to help dial in accuracy and buy a few extra bolts for target practice and hunting. The M10 is one of Steambow’s pricier offerings, but it also has the highest ammo capacity and the most customization options. If you want the ultimate compact crossbow setup, the ability to preload multiple bolts and have extra 10-shot magazines on hand makes the M10 the one to consider.

• Buy the Steambow M10 Tactical Recurve Crossbow in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

I’ve tested a few compact crossbows before, but nothing with a multi-bolt loading system like the Steambow setup I’m testing in this video. As with my other Crossbow Field Test videos, I recorded Chronograph velocity at the same time I was shooting the target so I didn’t need two separate segments, I did it all in one pass with lots of cameras rolling. I didn’t dedicate a camera to the Chronograph for this test because I wanted a camera focused on the target; my camera glasses usually capture the Chronograph readings for me. I only have so many cameras, but everything was captured fine. If you want to learn more about the specifications and details of the Steambow AR-6 Stinger II, then watch my dedicated Table Top Video located here.

Steambow lists 180 fps as the claimed velocity for the Steambow AR-6 Stinger II Tactical. I consistently measured right around 160 fps, pretty close to the claim. Using the included 142-grain, 6.5-inch aluminum bolts my chrono readings ranged from 159 to 164 fps, averaging 163 fps, which is very consistent. That produced about 8.4 foot-pounds of energy, so both velocity and FPE were a little under Steambow’s stated numbers. That’s enough for small pests, but humane shots depend on accuracy, you’ll want head or shoulder placement, and I’m not fully convinced this bow is always up to that task. You’ll need to judge its accuracy for your own use.

View fullsize

On elevation (up and down) the Steambow AR-6 Stinger II was fairly accurate. Where it struggled more was windage: I had to aim noticeably to the right to move bolts toward the bullseye. The sight is very basic (a single fiber-optic post just behind of the Picatinny rail), which likely contributed to the windage issue. Despite that, I managed a roughly 4-inch group at 30 feet, with one bolt behaving like a flyer.

Overall the Steambow AR-6 Stinger II performed well. I really like the cocking and bolt-feeding system — cocking is easy by shouldering the stock, pressing the release, then pulling the front of the bow down using the foregrip for leverage. You don’t need to be super strong to do it, and with practice you could get very quick at follow-up shots. I’d definitely add a red dot to the rail to help dial in accuracy, and I’d buy a few extra bolts for target and hunting. The AR-6 Stinger II is pricier than some basic models, but the ability to preload multiple bolts in the built-in clip and unleash six shots in seconds makes the extra cost worth it to me.

• Buy the Steambow AR-6 Stinger II Tactical in Canada

• Buy Compact Recurve Crossbow in the US

View fullsize

In this Field Test Shooting video for the Umarex Marlin Old West CO2 BB Revolver I check real-world performance: first I measure fps using a fresh standard 12-gram CO2 cartridge and 4.5 mm steel BBs through my chronograph. After that I hang a paper target at 30 feet and fire 10 rounds using the Single-Action-Only trigger to see what kind of grouping the revolver delivers straight out of the box. If you haven’t already seen my Tabletop Video Review for the John Wayne Marshal CO2 BB Revolver, watch that for full specs and close-up footage.

For the velocity test I put five shots through the chronograph. The slowest registered 345 fps and the fastest hit 416 fps, with an average of 403 fps, right in line with Umarex’s claimed 400 fps. Perfect for popping cans and casual plinking out to roughly 30–40 feet. The test was done inside a sea can at about 18°C (≈64°F), which gives a middle-of-the-road CO2 performance; warmer weather will typically push velocities higher.

View fullsize

Next I set the paper target on my pellet trap at 30 feet. Using my usual semi-rested position (hands braced on a front sandbag and seated on a stool), I fired 10 rounds with the Marlin Old West. The group measured roughly 4 inches, a bit left and just slightly high from the bullseye — not far off and similar to the grouping I got with the John Wayne Marshal CO2 BB Revolver, although the Marlin’s velocity numbers were notably higher.

The Umarex Marlin Old West CO2 BB Revolver is an inexpensive, mostly-plastic Single Action Army style revolver. There’s a fair amount of polymer in the construction, but it still feels solid despite being on the lighter side. That lighter weight can make the gun feel a bit twitchy in the hand compared with heavier replicas, which can affect accuracy. At the time of this video the Canadian price was about $99, which makes it good value — especially since it loads 18 rounds quickly compared with traditional shell-loading revolvers, meaning more trigger time with less fuss. There are a number of similar replica revolvers available from our Replica Airguns stores in Canada and the US, so check our stock if you’re shopping around.

• Buy the John Wayne Marshal CO2 BB Revolver in Canada

• Buy the John Wayne Marshal CO2 BB Revolver in the US

View fullsize

Type: BB Pistol.
Manufacturer: Distributed by Umarex
Model: Marlin Old West Revolver
Materials: Mostly plastic, some internal metal parts.
Weight: 1.2 pound (544 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.5 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 400.

View fullsize

Trigger Pull: The trigger on the Umarex Marlin Old West CO2 BB Revolver is single-action-only, so you must cock the hammer before each shot. That removes most of the trigger travel and effort, giving the Marshal a short, light, and easy-to-manage pull. It’s ideal for deliberate, accurate shooting, but less suited to action-style rapid fire unless you’ve got a very fast thumb.

View fullsize

Accuracy: I haven’t tested the Marlin Old West model specifically, but it should perform very similarly to the John Wayne Marshal CO2 BB revolver, they’re nearly identical aside from licensing, safety, and magazine placement. In my field test of the John Wayne Marshal it averaged closer to 360 fps rather than the claimed 420 fps and produced roughly a 4-inch, 10-shot group at 30 feet. You can watch that video here; I’ll hope to be posting a dedicated field test for the Umarex Marlin Old West soon.

View fullsize

Build Quality: There’s not a lot to get excited about in terms of materials, the Umarex Marlin Old West CO2 BB Revolver is mostly plastic with some internal metal parts like the barrel, trigger, hammer, and CO2 components. It follows the common two-half, screwed-together budget construction, which looks cleaner on the side where the screws are hidden. At just over a pound it’s fairly light. With relatively few moving parts, it should be reasonably reliable; the mechanical components do what they need to do and feel suitably solid for the price.

View fullsize

Realism: At first glance the John Wayne Marshal CO2 BB revolver resembles a Colt Single Action Army Revolver in shape and size, but it’s much lighter, about half the weight. The lack of real bullet openings in the cylinder (when viewed from the front) reduces realism. I’m used to the newer generation of revolvers with working cylinders and loadable, removable shells; those are pricier and hold fewer rounds, but they offer a much more authentic experience.

View fullsize

Pros:

• A decent looking replica of a Colt Single Action Army Revolver.

• Single action only trigger is short and light and well suited to careful shot placement shooting.

• 400 claimed fps is about perfect for plinking at ranges up 30-40 feet.

• 18 round magazine has a nice high capacity and easy to load when empty.

• Should get lots of shots per CO2.

• Safety is well hidden underneath just in front of the trigger guard.

• I like the look with the all black receiver and simulated wood grips.

• CO2 Allen key is built into grip so always have it on hand and will not lose it.

• Marlin licensed and seems to be $50 less than the almost exact same John Wayne version.

Cons:

• Mostly plastic builds makes it a bit light in the hand.

• No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

• Not a big fan of the clamshell plastic packaging.

View fullsize

Comments:
The Umarex Marlin Old West CO2 BB Revolver is a solid choice if you want an old-west single-action cowboy BB shooter for less than the nearly identical John Wayne Marshal (it’s about $50 cheaper). If you want more authenticity, consider one of the shell-loading Single Action Army style revolvers, they cost more, shoot a bit slower, and carry fewer rounds, but they deliver a much higher level of realism.

• Buy the Umarex Marlin Old West CO2 BB Revolver In Canada

• Buy the Umarex Marlin Old West CO2 BB Revolver in the US

View fullsize

Type: BB Pistol.
Manufacturer: Distributed by Umarex.
Model: DS11 1911.
Materials: Mostly plastic with some internal metal parts.
Weight: 1.06 pounds (481 grams).
Total Length: 8.86 inches (22.5cm).
Barrel: 4.5 inch barrel (11.3cm) smooth bore.
Propulsion: CO2
Action: Semi auto NBB, DAO trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 18 round metal stick magazine.
FPS: Claimed 400.

View fullsize

Trigger Pull: The Umarex DS11 1911 NBB CO2 BB Pistol’s trigger feels exactly like you’d expect from a low-cost double-action-only CO2 pistol. The trigger does the heavy lifting. You’re pulling against a fairly stiff internal hammer spring (inside the barrel assembly) until it releases, snaps the hammer back, and opens the valve to fire. Run through the 18-round mag fast and your trigger finger will definitely notice.

View fullsize

Accuracy: II’ve already completed a full field test of the Umarex DS11, which is a bit out of my usual order, so I can share performance feedback now. On average it clocked 382 fps over five shots on my chronograph. From my standard paper target at 30 feet, a 10-shot group measured roughly 2 inches and was well centered, with several rounds landing in the bull’s-eye. You can watch the video here!

View fullsize

Build Quality: The Umarex DS11 1911 NBB CO2 BB Pistol is constructed almost entirely from plastic, keeping its weight just over a pound. While it lacks the heft of a full-metal replica, the lighter build makes it more forgiving if dropped on a hard surface. The fit and finish are solid, and its two-piece design secured mainly from the left side features very few moving parts or controls, which should contribute to excellent durability and reliability.

View fullsize

Realism: The Umarex DS11 is styled after the classic 1911 with a modern tactical look. It uses a double-action-only (DAO) trigger that’s relatively long and a bit heavy, not the short, feather-light feel of a true single-action 1911 trigger. The barrel is recessed and the CO2 is neatly hidden in the grips, so at a glance it could pass for the real thing. Up close, however, there are giveaways: a molded hammer, molded safety and slide-release, visible screws along the left side, and a seam where the two halves join.s.

View fullsize

Pros:

• Low price well under $100 Canadian.

• Shoots pretty decent, almost 400 fps and a nice 2 inch grouping fairly well centered out of the box.

• Decent looking Replica of a modern 1911 Semi Auto Pistol. A lot more detail than most base non block CO2 BB Pistol.

• Has a picatinny rail for adding accessories if you want to.

• Double Action Trigger is pretty decent, Not going to be a super fast action shooter but it is manageable for a DAO trigger.

• Uses the standard all metal stick magazine found inmost of these NBB CO2 BB Pistols.

• I like the cut out in the slide showing off the gold inner barrel and ejection port.

• Safety is not the typical on off style, more thought went into this one adn it looks better too.

• Recessed barrel for added realism.

• CO2 tab is fairly well hidden.

Cons:

• Almost all plastic other than some internal metal parts like the barrel and spring and some other stuff I am sure.

• DOA trigger a bit heavy but about the same as other similar Airguns like this one.

• Sights are not adjustable and are all black with no white dots.

View fullsize

Comments:
The Umarex DS11 1911 NBB CO2 BB Pistol is a more thoughtfully designed and better-looking 4.5mm CO2 BB NBB Airgun than the typical budget options. It uses the common metal stick magazine, which is convenient since you more than likely have a bunch lying around and you can keep several preloaded and spend more time shooting and less time reloading on site. It also ships in a proper box, which adds to the premium feel. In my test at the Replica Airguns Indoor Shooting Range it performed very well.

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in Canada

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in the US

View fullsize

I took the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol out to the Replica Airguns Indoor Shooting Range today for some hands-on testing to see how it performs in real-world conditions. I haven’t filmed the full Table Top Review Video for this model just yet, but that’s coming soon. For this initial session, I wanted to focus strictly on performance, specifically testing velocity and accuracy. I ran a quick multi-shot chronograph session to get an average fps reading and followed that up with a 10-shot grouping test at 30 feet to get a practical sense of how accurate this pistol is right out of the box.

For the chronograph test, I used a fresh 12-gram CO2 cartridge and standard 4.5mm steel BBs. The room temperature was about 20°C. I noticed the velocity seemed to climb slightly as the CO2 settled in, so I averaged out the last five readings for consistency. Those shots came in at 386, 383, 377, 385, and 377 fps, giving an average of 382 fps. That’s very close to the manufacturer’s claimed 400 fps, and I’d expect it to reach or even exceed that number under warmer conditions. Overall, the DS11 delivered solid and consistent power for a non-blowback CO2 pistol.

View fullsize

Moving on to accuracy, I set up a target at 30 feet and fired from a semi-rested position, seated on a stool with my hands braced against a sandbag for stability. The Umarex DS11 1911 NBB CO2 4.5mm BB Pistol shot impressively well-centered right out of the box, which is a big plus since the sights are non-adjustable. My 10-shot group measured about 2.5 inches, with several rounds landing right in the bullseye. With a bit more trigger time and familiarity with the gun’s feel, I’m confident I could tighten that group even further.

All things considered, the Umarex DS11 1911 NBB CO₂ BB Pistol makes an excellent entry-level 4.5mm BB pistol for anyone looking for a tactical-style 1911 that’s affordable, reliable, and fun to shoot. Despite its simple, mostly polymer build, it looks great and feels comfortable in the hand. You can expect over 100 shots per CO₂2 cartridge, making it efficient and economical to shoot. Performance-wise, it’s got good power, accurate shooting right out of the box, and a straightforward design that should prove dependable over time.

In short, the Umarex DS11 1911 NBB is a great budget-friendly option that doesn’t sacrifice performance, and I have to say, it looks sharp for a basic, non-blowback BB shooter.

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in Canada

• Buy the Umarex DS11 1911 NBB CO2 4.5mm BB Pistol in the US

View fullsize

I had the chance to take the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol out for some testing today in the Replica Airguns Indoor Shooting Range to see how it performs. I’ve already done my close-up tabletop breakdown (specs, build, pros/cons), so if you want the close-up visuals adn details, go check that video out. For this session I concentrated solely on performance, a quick 5-shot chronograph run to record velocity and a 10-round semi auto group at 30 feet followed by the rest of the mag in full auto to get a practical feel for out-of-the-box accuracy.

For the chronograph test I used a fresh 12-gram CO2 capsule with stand.25 gram Airsoft BBs, and the temperature was about 20°C. Five shots with .25 gram Airsoft BBs registered 301, 301, 291, 285, and 281 fps, averaging out to 292 fps. That’s within the expected range for a full-blowback CO2 pistol running heavier .25 gram Airsoft BBs, you’d see higher velocities with lighter .20 gram rounds, and it’s plenty adequate for Airsoft games and target work plinking.

View fullsize

On the accuracy side I fired from 30 feet using a semi-rested shooting position (hands braced on a sandbag while seated). In semi-auto the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol shot just slightly low and a touch left, producing roughly a 2-inch group with most rounds clustered reasonably well. Switch to full-auto, however, and it becomes almost impossible to keep on target, the pistol tended to climb high and stray to the right, putting most shots completely off the target. That full-auto behavior makes it poor for controlled rapid-fire engagement, but in semi-auto it’s much more manageable.

All told, the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol is a strong option if you like the Glock style or already own (or plan to own) a real-steel Glock. physically and mechanically it shares a very similar feel. KJWorks has a reputation for high-quality, well-made products, and this pistol is another solid example. If you don’t need official Glock licensing but want a Glock-based Airsoft pistol, the KP-18 is a great choice, especially for shooters who value realism and good build quality in a reasonably priced package.

• Buy the KJWorks KP-18 TBC CO2 Blowback Airsoft Pistol in Canada

• Buy Glock Airsoft Pistols in the US

View fullsize

I took the Umarex Ruger P345 CO2 NBB Airsoft Pistol out for some testing today to see how it performs in the Replica Airguns Indoor Shooting Range. I’ve already done a close-up tabletop breakdown before (specs, build, pros/cons), so if you want the nitty-gritty visuals go check that. For this session I concentrated solely on performance, a quick 5 shot chronograph run to record velocity, and a 10-round group at 30 feet to get a practical feel for accuracy out of the box.

For the chronograph test I used a fresh 12-gram CO2 capsule with standard BBs, and the temperature was about 20°C. Five shots with .25 gram Airsoft BB’s registered 307, 301, 306, 304, and 308 fps, which averages out to 305 fps. That’s right in the expected range for a non-blowback CO2 Airsoft Pistol of this type using heavier .25 gram Airsoft BBs, expect higher velocities with lesser weight .20 gram Airsoft BBs. For sure enough power for backyard plinking and casual target work.

View fullsize

On the accuracy side I fired from 30 feet out, semi-rested (hands braced on a sandbag while seated on a stool in the back). The Ruger P345 CO2 NBB Airsoft Pistol shot fairly well centered, but landed a touch left and slightly low, overall grouping was around 2 inches with only one flyer, which, oddly enough, was dead center in the bullseye when I checked the target later. The sights are fixed out of the box, so you’ll want to account for that small left/low bias when aiming or consider a simple sight/laser addition if you need a perfect zero.

All told, the Umarex Ruger P345 CO2 NBB Airsoft Pistol would make a decent entry-level Airsoft pistol. You can additionally offset cost by purchasing inexpensive stick magazines rather than investing in pricier full-size mags that come with other more elaborate Airsoft Guns. It has a good, reassuring weight for an external plastic Airgun, which helps it feel well-balanced in the hand. For someone after an affordable, reliable sidearm for plinking or casual training, the P345 is a solid option.

• Buy the Umarex Ruger P345 CO2 NBB Airsoft Pistol in Canada

• Buy the Umarex Ruger P345 CO2 NBB Airsoft Pistol in the US

View fullsize

I took the Daisy 415 Powerline CO2 BB Pistol out for some testing today to see how it performs in the Replica Airguns Indoor Airgun Range. I’ve already done a close-up tabletop breakdown before (specs, build, pros/cons), so if you want the specifications and details along with more closeup video then go check that Table Top Review out. For this performance session, I concentrated solely on power and accuracy, a quick chronograph run to record velocity and a 10-round group at 30 feet to get a practical feel for out of the box accuracy.

For the chronograph test I used a fresh 12-gram CO2 capsule with standard BBs and the temperature was about 20°C. Five shots registered 475, 455, 466, 462, and 471 fps, which averages out to 466 fps. That’s a healthy number for a CO2 pistol in this class, plenty of power for backyard plinking. I have a feeling it will go through CO2 pretty quickly as it is really loud meaning there is a lot of CO2 being released with each shot.

View fullsize

On the accuracy side I fired from 30 feet, using a semi-rested position (hands braced on a sandbag while seated in the back). The Daisy 415 Powerline CO2 BB Pistol grouped very well, landing around a 2-inch group with the majority of rounds tightly clustered on the bullseye. There was only one flyer that fell outside the primary group just up and to the left. The fiber optic front, and wide open rear sight are fixed, so you may need to adjust your point of aim if you want perfect vertical zero as each shooter will place shots a bit differently, but overall it was impressively centered for a budget pistol.

All told, the Daisy 415 Powerline CO2 BB Pistol is a well-powered, accurate little gun with a cheap price tag and a low cost to shoot. One caveat: it doesn’t use a typical removable stick magazine, you have to load it via the internal spring magazine, but that loading method has a silver lining: the forced pauses between reloads let the pistol warm up slightly, which can help maintain higher sustained fps over successive strings. For anyone wanting an inexpensive, reliable plinker with real punch and decent accuracy, this one is worth a look.

• Buy the Daisy 415 Powerline CO2 BB Pistol in Canada

• Buy the Daisy 415 Powerline CO2 BB Pistol in the US