I’m a bit late getting this one out, I was a bit distracted yesterday and not with your typical Valentines day events. Sometimes life get’s a bit in the way. So here’s the deal. Save 10% Site-wide from Feb 14th till Feb 17th.
Air Venturi announced their new Springfield Armory lien of BB and Airsoft guns at SHOT Show 2019 and of course I stopped by to talk with Scott and see what these new products where all about!
First off we have the Springfield Armory M1 Carbine Rifle. You will be able to get it in either 4.5mm Steel BB or 6mm Airsoft versions. Both will have full drop out metal magazines that hold the 12 gram CO2 and either 15 BB or Airsoft rounds. You can expect around 40-60 shots per CO2 since the Springfield Armory M1 Carbine is a full blowback Airgun. The standard version will come with a synthetic wood stock that is very believable but for around $100 more you will have the option of a real wood stock which does add a bit to more weight to the rifle.
Continuing on with some more Springfield Armory Airguns. Air Venturi will be distributing the XDM pistol in a compact and full size configuration, again both 4.5mm Steel BB and Airsoft versions. There will be a solid black version and a two tone silver slide version so lots of options to pick from. The 4.5mm Steel BB version will use a 12 gram CO2 while the Airsoft version will allow for Green Gas or CO2 mags.
I wanted to mention one more product Scott showed me that is still in production, a reactive target system called the Bata-Bang that connects to your phone via Bluetooth allowing you to time your shooting and play shooting games with it and others even online. Hopefully we see this product soon from Air Venturi!
This year at SHOT Show Las Vegas 2019 Umarex introduced some new Glock's, a New Beretta and a new Pellet Rifle which unfortunately was not brought to my attention when I did my Interview so sorry now coverage of the Ruger 10/22 CO2 Pellet Rifle :(
Starting with two new CO2 Blowback 4.5mm BB Glocks, Umarex now has a Glock 17 Generation 3 partial blowback CO2 BB Glock with a full size drop out metal magazine. This setup will increase the fps a bit since it uses the more efficient partial blowback system. If you would rather have a full Blowback CO2 BB Glock then Umarex has it in a Glock 17 Generation 4 version that functions pretty much like a traditional Airsoft Blowback gun but instead this one uses 4.5mm steel BB’s.
In terms of Blowback Airsoft Glocks Umarex has a two Glock 17’s, yo can get them in generation 3 or 4 an both are full blowback with full size drop out metal magazines.
Umarex introduced a really nice M9A3 Beretta this year at SHOT Show 2019. The Umarex Beretta M9A3 comes in the FDE color scheme and has an extended threaded barrel that should be able to take a much suppressor. The Beretta M9A3 is full blowback with a full size dropout metal magazine and can be shot in semi or full auto.
Now for the Umarex Ruger 10/22 Pellet Rifle I completely missed at the Umarex booth… Well if you didin’t know there was a pellet version of this rifle you would be hard pressed to be abel to tell the difference between it and the real 22LR version! The Umarex Ruger 10/22 Pellet Rifle utilizes twin 12 gram CO2 cartridges to fire .177 caliber pellets. It has a 10 round drop out magazine with interchangeable rotary nmagzines that can be pre-loaded. And yes the Umarex Ruger 10/22 Pellet Rifle is a blowback Airgun!
I’m back from SHOT Show Las Vegas 2019 and as always I had an awesome time. I love January since I get to go to SHOT Show each year. What an awesome job!
This year was another great show with lots of new products from the Airgun companies. I managed to get seven interviews in this year so I have my work cut out for me editing and uploading all of these informative YouTube Videos.
For now here is a SHOT Show Las Vegas 2019 Teaser Video along with some photos…
In this December Update Video I wish everyone a Merry Christmas and Happy New Year. If you have other beliefs and perhaps don’t celebrate Christmas in the traditional Canadian fashion then I wish you a Happy Holiday!
I received a number of products lately and really don’t have time to do full reviews of them as the Holliday season is on us which is going to limit how many videos I can pump out over the next couple of weeks so hopefully this Update video will keep everyone excited about the future Replace Airgun Videos.
Here are the items I talk about in this December 2018 Update Video:
Sig Sauer ASP M17 CO2 Blowback Pellet Pistol
Sig Sauer Fake Suppressor for P226 ASP Pellet Pistol
Umarex Steel Strike Full Auto BB Rifle
ROHM RG-89 .380 Caliber Blank Revolver
Umarex Legends WildCard Airsoft SAA Revolver
Umarex WW2 Limited Edition P08 CO2 Blowback BB Pistol
Umarex WW2 Limited Edition M712 Full Auto CO2 Blowback BB Pistol
Webley Mark VI CO2 Pellet Revolver
John Wayne Signature SAA Revolver Solid Maple Wood Case
In this video I have some really cool stuff to show you guys, many items I have been waiting to get my hands on for some time now...
Right off the bat I need to let you all know I got my Crosman DPMS SBR CO2 Blowback 4.5mm BB M4/AR Full Auto Airgun and it is simply awesome! It's really everything we have all been asking for, A full scale M4 Replica with Blowback operation and semi and full auto, with quality material throughout and realistic working parts. You can even split the Crosman DPMS SBR CO2 Blowback 4.5mm BB M4/AR Full Auto Airgun into its upper and lower sections for cleaning and possible BB jams. Look forward to several upcoming videos featuring the Crosman DPMS SBR CO2 Blowback 4.5mm BB M4/AR Full Auto Airgun.
Next up in this weeks news is... Can you believe it, after two years I now have my hands on a Gletcher M1944 Mosin Nagant, not the short stock and short barreled M1891 Sawn Off Version but the full size rifle version complete with working metal bayonet :) I love it when I first saw it at SHOT Show over two years ago and still love it today. I expect it to shoot similarly to the M1891 Sawn Off M1891 Version I already reviewed a few times but with perhaps more power and a bit better accuracy?
Some other very cool news, we are now selling KWA Airsoft Guns, I have been a big fan of KWA for a long time and enjoy visiting their booth at SHOT Show, they have excellent high quality detailed Airsoft guns and carry a great combination of Blowback and AEG Airsoft Guns. Once I get through my Crosman and Gletcher reviews I will focus on showcasing the new KWA lineup we are selling.
Beginning Saturday Jun 30th and ending Monday July 2nd we are having a Replica Airguns Canada Day Sale on airsoft guns, ammo, gear, and accessories. This is only in our Canada Replica Airguns Store!
I made a similar video about how to hold your airgun a while back but sometimes they get a bit buried in all the video I make. I feel it's really important how you grip your gun even if it's only an airgun with very little kick or recoil. Proper pistol grip is something you should use no matter what so that you can carry it forward to what ever gun you are shooting.
More kick or recoil means a firmer grip is required to hold the gun so when shooting a powder burner with lots of kick grip becomes even more important.
In this video I go over the proper two handed grip to use when holding a pistol, which hand to hold lose and which had to grip tight, how to overlap your fingers and thumbs.
This year at SHOT Show 2018 I had the please to interview Bob from ASG yet again, Bob always has a ton of info to share about ASG new products so make sure to watch this video as it has a lot of info!
To summarize what Bob shared, ASG has their line of CZ P-09 and SP-01 Shadow Steel BB and Airsoft Full Blowback pistols with full size drop out metal magazines. And you'll be happy to know the Canadian CZ P-09 Airsoft version not only will have a threaded barrel but it will come with both a black and red barrel tip cover.
Another new air pistol from ASG is the Dan Wesson licensed none blowback pellet firing 1911, similar to what Crosman is offering that utilizes a full size drop out metal magazine combined with a two sided 6 shot rotary magazine that flips 180 degrees for a total of 12 shots per .177 caliber pellet load. the ASG Dan Wesson Pellet shooting 1911 has a nice heavy weight to it's metal slide and frame design.
Lastly Bob shared with us a new ASG ICS Hera Arms CQR Airsoft Rifle, this ASG Airsoft Rifle is still in the design and production state but look forward to it later on this year!
Umarex presented at SHOT Show this year a license I think we all thought was never going to happen! That would be Glock, for years Glock has been steadfast about not allowing their handguns to be licensed by anyone other than them. Glock has been very protective about their brand and intellectual properties as they are entitled to. I'm not sure what Umarex said to Glock but somehow they where able to get Glock to agree to letting Umarex license Glock pistols to be made into BB and Airsoft versions. The first BB and Airsoft models I was able to checkout at this years SHOT Show are pretty basic in design and are styled after the Glock 19.
The new Umarex Glock 19 licensed BB and Airsoft pistols are CO2 powered as expected but don't have blowback operation and have a fixed metal slide and a drop out stick magazine. The new Glock Licensed Umarex pistols do however look and feel really good, picking them up you would think you are holding a real steel Glock until you try and rack the slide or drop the magazine. Umarex did indicate there will be more licensed models coming out down the road with full blowback operation and full size drop out metal magazines, we just need to be patient as Glock is very particular about the quality control.
Another show stopper for me at the Umarex Booth was the Legends Cowboy Lever Action Shell loading BB Rifle. I love shooting my Red Ryder BB Rifle but I have to admit the Red Ryder kind of looks a bit like a kids beginner airgun. The new Umarex Legends Cowboy Lever Action Shell loading BB Rifle look, feels and operates like the real deal so it's not only going to be super fun to shoot but an awesome replica to own especially if your into the old west guns.
The Umarex Legends Cowboy Lever Action Shell loading BB Rifle uses two 12 gram CO2 cartridges and can hold 10 BB loaded shells in its tube styled magazine, working the lever action elects the empty shells. Umarex claims around 410 fps so the Umarex Legends Cowboy Lever Action Shell loading BB Rifle will be Canada legal without the need for a PAL. I thought the stock was real wood but was correct, it's actually made out of plastic, but I think just about anyone looking close up would have a hard time believing Umarex didn't use real wood.
Thanks to Mark Davis from Umarex for making himself available to interview!
So it begins, I have been to this years SHOT Show in Las Vegas and checked out the new products from Umarex, Crosman, Sig Sauer and ASG. I have taken video and Interviewed the main Airgun companies. Now it's time to report back to everyone what I saw and learned. To start with here is a Teaser Video with some scenes from Vegas, inside SHOT Show and of course some of the highlight products from each airgun company.
This year at SHOT Show 2017 in Las Vegas, I found there wasn’t a lot of new Airgun products but as always there are some that stood out for me. If you want more info on each Airgun Company then make sure to watch my full interviews for this years SHOT Show 2017. So without prolonging this video any longer let’s get right into it…
Umarex Legends MP CO2 Full Auto German MP40 Replica Machine-gun:
What’s not to like about the Umarex Legends MP? It has lots of metal parts weighing in at 7.7 pounds, a 60 round steel BB magazine with a dual 12 gram CO2 system. You also get your choice of shooting either in semi auto or full auto at up to 400 fps. Personally the Umarex Legends MP was the most interesting Airgun at the show this year for me and I really think it is going to be a hit!
Umarex SA10 Blowback Pellet and BB CO2 Pistol:
Another interesting product from Umarex this year was the SA10, I am not really sure what it is exactly styled after, it’s more of a futuristic looking gun with slide venting and a thread barrel for adding a mock suppressor or compensator. What appealed to me most about the Umarex SA10 was the new magazine design that incorporates a full size drop out metal magazine with 4 rotary 8 round magazines that can be loaded with either pellets or BB’s. When you empty one 8 shot magazine you simply drop the entire mag out and swap your empty 8 shot rotary magazine for a full one. The SA10 has a nice weight of around 2 pounds and shoots up to 426 fps.
Sig Sauer ASP P320 CO2 Blowback Pellet Pistol:
Sig Sauer introduced their new Sig Sauer ASP P320 CO2 Pellet Pistol this year that will be replacing the P250. Like the P250 the Sig P320 has a metal slide and polymer frame but instead of a double sided 16 shot rotary magazine, the Sig ASP P320 has a newly designed and very unique 30 round belt fed magazine. That’s nearly double the capacity without having to flip the magazine around part way through shooting. It’s great to see innovations like this happening in the airgun market.
Crosman Remington 1875 Shell Loading CO2 Pellet and BB Revolver:
Crosman introduced their own Single Action Old West Revolver this year in the form of the Remington 1875. Like the super popular Umarex Single Action Army Revolvers, the Remington 1875 is also shell loading and uses 12 gram CO2. You have the option of shooting either Pellets or BB’s out of its smooth bore barrel. I expect the Crosman Remington 1875 Shell Loading Revolver to be another popular Old West Airgun Revolver.
Crosman PSM45 Single Shot Spring Powered BB Pistol:
The Crosman PSM45 at first glance may not seem that interesting, after all it’s all plastic on the outside and only shoots about 200 fps! On the plus side it kind of looks like a Glock and we all know how hard it is to find airguns these days that resemble a Glock. I also like the fact that there is no need for any CO2, and most springers out there look like springers while the Crosman PSM45 looks like a real semi auto pistol. The PSM45 even has pretty decent weight to it since there are lots of internal metal parts and a full size drop out metal magazine which was a real surprise in such an entry level low cost pistol. If you’re looking for a fun inexpensive replica plinker than the Crosman PSM45 should fit the bill. On a side not the PSM45 would also make a really great low cost prop since the slide does work and it has that full size drop out magazine!
ASG Dan Wesson 715 2.5 and 4 inch Shell Loading CO2 Revolvers:
The ASG Dan Wesson Revolver has always been a popular choice, and then the Dan Wesson 715 came out improving on the design by adding extra weight and smoothing out the mechanics. How do you top that? Well by giving us some more options like barrel lengths. You now have your choice of a 2.5, 4 or 6 inch barrel for the Dan Wesson 715 and of course you will be able to buy your 715 pick in 4.5mm Steel BB, 6mm Plastic Airsoft or .177 Caliber Pellet ammunition versions. My personal choice may be the 4 inch Dan Wesson 715 since it has the addition of an integrated accessory rail machined into the outer barrel for lasers or tach lights.
Gletcher M1944 Mosin Nogant CO2 BB Rifle:
The Gletcher M1944 Mosin Nogant CO2 BB Rifle is not a new replica gun this year but it has been a hard one to get your hands on. In fact up until SHOT Show 2017 I had never seen one in person and so the Gletcher M1944 is new to me. I was very impressed with the quality of the Gletcher M1944 Mosin Nogant, it has a lot of metal parts including the swing out bayonet and even the simulated wood stock looks like real wood. I even had to take a second look and ask before confirming that the stock is in fact plastic on the Gletcher M1944 Mosin Nogant. I am looking forward to reviewing this rifle in the future when I do finally get one!
Of course there where other interesting products at SHOT Show 2017 this year but those are the products that stood out the most for me. Again make sure to watch my full interview videos to find out more about all the new products at this years SHOT Show.
And finally my last Vimeo video from SHOT Show 2017 in Las Vegas! Sorry there is no Interview this time with KWA but I did talk a lot with the KWA folks over at SHOT Show this year and I even got to test out their Laser Targeting System designed to be used with several specifi KWA guns by laser-ammo.com.
Unfortunately we don't carry the KWA brand in the replica Airguns store, a few models sneak in when being distriubted by another company like ASG in the case of the ASG MP9. I would love to carry KWA Airsoft Products in the future since they really do make very high quality Airsoft guns.
KWA has a great selection of Airsoft pistols and rifles in both Gas Blowback and AEG formats. The quality reminds me of the KJWors Airsoft guns we sell in the Replica Airguns Canada Store, you can really feel the quality when you pick them up and hold them for yourself.
Another SHOT Show 2017 interview video, this interview is with Bob Li from ASG (Action Sport Games), Bob shares with me some updates to the super popular Dan Wesson 715 along with the reintroduced EVO Scorpion Inferno powered Airsoft Rifle. Bob finishes up with a new X9 Classic which is a Beretta M9 in 4.5mm Steel BB.
You may have thought the Dan Wesson 715 was already pretty much perfect as is so what could ASG to make it even better? How about different barrel lengths. ASG has introduce the Dan Wesson 715 in both a new 2.5 inch and 4 inch version. Both lengths will be hitting stores shortly and will come in .177 caliber pellet and 4.5mm steel BB options. 6mm Airsoft will be out later on. The 4 inch version also includes an integrated accessory rail machined into the outer barrel for those of you wanted to add items like lasers and tactical lights to your Dan Wesson 715.
Last year at SHOT Show ASG introduced the EVO CZ Scorpion 3 A1 Inferno powered Airsoft Rifle but is again reintroducing it this year since they decided to take their time and get it perfect before releasing it in stores this March. The EVO CZ Scorpion 3 A1 is Inferno powered using an HPA system with a custom chip set that allows for a three round burst option an empty magazine detection.
ASG has sourced out not just any 4.5mm Steel BB shooting M9, they are actually getting their new ASG X9 Classic built by KJWorks. KJWorks is known for their Airsoft guns and I have reviewed several of them to date. If you have been looking for a KJWorks M9 but would prefer it to be in 4.5mm Steel BB then the new X9 Classic 4.5mm Steel BB KJWorks M9 exclusive to ASG is where you can get one!
Last week I was in Las Vegas to attend this years 2017 SHOT Show. As always I look forward to this event since I not only get to look at all the new Airgun related products, but I also meet with the big Airgun companies and talk face to face with many of the good folks I have been emailing back and forth with.
This first video will hopefully get you excited to watch my upcoming Interview videos I will be making for companies like: Sig Sauer ASP, Umarex, ASG, Crosman and Gletcher. I also have some additional video of the KWA booth where they had a laser sighting system set up for people to test out their Airsoft guns on a simulated targeting system.
For now here are some photos and of course checkout my Preview Teaser Video of SHOT Show 2017 in Las Vegas.
One of the most common types of question I get on my Replica Airguns YouTube channel has to be something like… Why is my Airgun not working? Most of the time the amount of info about the problem is limited to something like… “It was working yesterday but now it’s not working anymore” or something like “when I pull the trigger nothing happens”. My personal favorite is… “I took my gun apart and now it doesn’t work!”
I just made a similar video for Blank Guns and as I said in that video, trying to trouble shoot a mechanical or technical problem over the internet is very difficult, this goes for cars, guns, computers or what have you…
In this Why is My CO2 Airgun Not Working video I will however cover some of the more common and obvious problems I have seen relating to why a CO2 Airgun may not be working properly. I really don’t get a lot of questions about Spring Piston or Pump Airguns so I will be focusing on CO2 Airguns in this video. There will be a lot of crossover with CO2 Airsoft guns so this video may be helpful for some of you Airsofters out there
First let’s get the super obvious stuff out of the way!
Did you put a new CO2 cartridge in it and is it pierced all the way?
Did you load BB’s or Pellets into the Airguns magazine and is the magazine in the gun correctly?
Is the safety off?
If the gun is a blowback semi auto single action Airgun then did you pull the slide back prior to the first shot?
CO2 Related Problems:
Not all CO2 cartridges are created equal, they often have slightly different shaped nubs on them and some brands will work better than others in different Airguns. If the shape of the CO2 nub does not fit properly into the valve area then it may not pierce or it could pierce but then not allow you to tighten it all the way losing all the CO2 in the process. If the CO2 is coming form the airguns handle to CO2 Valve area then this is an indication that your problem is related to the area where the CO2 enters the airgun.
There is a seal where the CO2 cartridge buts up to the valve, this seal can be damaged or even deformed from usage or even leaving your CO2 in the gun for too long. The outside CO2 Valve seal can also take the shape of a specific CO2 nub so when you use a different brand CO2 the seal may not properly make concat with the new CO2 type you are using, again causing leaking or even the total loss of all your CO2. Watch my YouTube video on “How to Fix Leaking CO2 in an Airgun”.
CO2 Valve Related Problems:
Again, make sure that Outside CO2 Valve Seal is in good condition and any leaking is not being caused by this problem, if you have checked the Out Side Seal and everything is OK with it then perhaps there is a problem with the CO2 valve?
One indication that your CO2 Valve might be the culprit is the total loss of all your CO2 when you try to insert and tighten a new CO2 Cartridge. Usually all the CO2 will exit the barrel, not the handle or valve area. What may be happening is the valve is stuck open or the internal seal is broken or deformed. If this is the case you will have to remove the valve and have a look inside, this is a lot easier on CO2 airguns that have the CO2 valve in the magazine, if the CO2 valve is in the actual Airguns then a lot more disassembly may be required and I would recommend an Airgun technician take care of this for you.
If the gavel is in the magazine then you will have to unscrew it, you may require a special tool for this? Once the valve is out of the magazine take a look inside and examine the internal seal, also look for any bits of metal shavings as they can disrupt the action of the valve causing leaking. Give the inside of the valve a good clean and then lubricate it with some silence spray. hopefully that fixes your problem!
BB’s getting Stuck in the Blowback Gas Tube:
I have actually made a dedicated video for this problem so I will put a link to it in the description of this video. The main reason people may have this problem is because we all like to rack that slide on our full blowback Airguns, but if you have a fully loaded magazine then each time you reach that slide without shooting the gun, you are inadvertently trying to load another BB into the breach area, the breach is only designed to hold one BB at a time so after a few racks of the slide the newly loaded have no place to go but into the Gas Tube where they can get stuck and cause having to the operation of your Full Blowback CO2 Airgun.
BB’s Rolling Out of the Barrel of Your CO2 Airgun:
This is not actually a fault of the gun but happens because of the way the gun is designed. This situation can happen with certain CO2 Airguns when the gun user pulls the trigger really slowly while the gun is point slightly in a downward position. What is actually happening is the first part of the trigger is made to draw a BB from the magazine into the breach of the gun. If the barrel of the gun does not have a rubber hop-up stopper in it then the BB is free to roll down the barrel and out of the gun. How do you fix this problem? Be more committed to your trigger pull and or shoot at a target that is not so low. Perhaps place your targets slightly higher than the gun so the barrel is not pointing down, especially if you like to take your time with the trigger :)
A Little Maintenance Can Go a Long Way!
Sometimes a good cleans is all you need to do to get things working as they should, again I have already made video Tutorial Showing “How to Clean Airguns and Blank Guns”.
What about stuff like My Airgun is jammed or my trigger is stuck or some random part fell out of my gun?
There is only so much I can cover in this video, most other problems are going to get a bit more complicated to fix and I suggest if your Airgun is not working and the suggestions I have made in this video do not solve your problem, then consider taking your gun into a gun tech.
First off I want to say it’s hard to trouble shoot technical or mechanical problems over the internet regardless of if ithas to do with guns, cars, computers or pretty much anything where unless you are there in person it’s really hard to figure out the problem.
But I will attempt to address some of the more common issues why a blank gun may not be functioning properly.
Why is my Semi Auto Blank Gun Not Cycling or Ejecting Shells?
One very common reason a blank gun may not be cycling the shells properly is because the owner has removed the barrel restrictor plug. People usually do this to make the barrel opening look more realistic but the barrel restrictor is a necessary component to increase the back pressure allowing the slide to cycle fully to the rear position so it can eject and pickup a new shell.
The blanks you are using may not have enough gun powder in them. Some blank guns require banks with more gun powder than others, again this additional internal pressure forces the slide all the way back, if the blank does not have enough gun powder in it then only a partial slide motion happens and so the discharged shell may not eject properly, in this case the user would have to clear the blank gun manually so another shell can then be picked up and loaded into the breach.
If your blank guns is dirty or not lubricated then it may act sluggish again restricting the full movement of the slide which will effect correct operation. Make sure to thoroughly clean and lubricate your blank gun, that may be a quick fix for you!
You may have a faulty extractor? The extractor is like a hook that grabs the discharged shell while the slide is in the reward position pulling or extracting the shell out of the breach. If the extractor is worn or broken then the empty shell will not be ejected from the breach so when a new shell is picked up from the magazine it has nowhere to go and usually you will get a jam-up in the ejection port area.
One final situation that can cause your blank gun to not cycle properly is to strong of a slide spring, some blank guns out of the box just come with a really heavy slide spring, so much so that even blanks with lots of gunpowder in them are still not strong enough to make the slide operate full motion. Your only option here would be to replace the heavy slide spring with a lighter one.
Why Are My Blanks Not Firing?
This is a situation where you pull the trigger and nothing happens. Lets get the obvious causes right out of the way here… Did you put blanks in your gun and are they new blanks? Did you chamber the first round in your semi auto pistol?
So now that that’s out of the way let’s look at some other reasons why your blank gun may not be firing a blank. Perhaps the firing pin is broken? Most blank guns are not made out of carbon steel and even the firing pins can be lesser quality than what you would find in a real gun so blank guns are more prone to breaking than real guns. I have seen broken firing pins in blank guns first hand so make sure to check the firing pin and that it is fully operational.
Try changing up your blanks to another brand? Again blank gun ammunition is not made to the same higher standards that real firearm ammo is made and some primers may require a little more pressure than your gun is providing. Even with real guns an ammo change may help the gun operate better.
Why is the Trigger or Hammer Not Operating Properly?
I have come across blank guns where there are mechanical problems in the trigger and hammer areas, you may be able to address this yourself but I would recommend taking your blank gun to a gunsmith since you will have to take the gun pretty much full apart to fix a problem in the trigger and hammer areas.
Of course make sure your gun is clean and lubricated, this can help a lot with the mechanical areas of your blank gun.
One problem I saw with a few EKOL Special 99’s was specifically with the single action potion of the trigger, when I would pull the hammer back it would not lock back and the hammer would often slip and fire randomly, this is rather dangerous. When I took the gun apart I found that the table top or step that the trigger was supposed to catch on was worn down on the edge so it would simply slip off. I was able to fix this by filing a new edge on the step area. Again this can happen because blank guns are not made out of as high quality metal materials as real guns.
Why does the Flame Come out the Top of My Blank Gun and Not the Front?
If you find that the flame or discharge comes out of the top of your blank gun and not the barrel, this usually does not mean anything is wrong with your blank gun. All it means is you own a top venting blank gun and not a front firing blank gun. In some countries front firing blank guns are not allowed but front venting blank guns are. The same may also be reversed in some countries, for instance here in Canada we can only import front firing blank guns with flare adaptors since our blank guns are imported under the assumption that they are to be used as signaling or flare devices.
Can I Convert my Top Venting Blank Gun into a Front Venting Blank Gun?
I really don't recommend altering a blank gun in any way as it may be a violation of your local laws and it could cause the blank gun to malfunction in a very bad way causing serious injury or even death!
In theory I suppose it may be possible to convert your Top Venting Blank Gun into a Front Venting Blank Gun but again you would need to allow for just the right amount of back pressure so a wide open barrel would not work unless it was a revolver. You can not simply remove the red plug and bingo you have a front firing blank gun because in most cases the barrel will be completely plugged in the frontal region. Not only would you need to drill out the plugged portion of the barrel but you would also have to somehow fill in the top venting area and again makes sure to allow for just enough back pressure to cycle the slide back and forth.
Hopefully this has helped some of you with blank gun issues. If you’re looking for a blank gun make sure to come down to www.ReplicaAirguns.ca and www.ReplicaAirguns.us and have a look in our blank gun area of our online stores.
I already made several review videos for both Gletcher NGT (4.5mm Steel BB) and the Gletcher NGT R (.177 Cal Pellet) Revolvers, including table top and shooting videos. So make sure to check those videos out for more information on both versions of Gletcher NGT and NGT R Revolvers.
I did however miss some noteworthy details that I wanted to cover in this video. Firstly, the real steal Nagant M1895 Revolver this Gletcher NGT is styled after has a very unique gas-sealing system that the Airgun version does not replicate or really require but it is worth mentioning.
Here is some more info on how the original Nagant M1895 Revolver Gas Seal System works:
(From Wikipedia) The M1895 by contrast, has a mechanism which, as the hammer is cocked, first turns the cylinder and then moves it forward, closing the gap between the cylinder and the barrel. The cartridge, also unique, plays an important part in sealing the gun to the escape of propellant gases. The bullet is deeply seated, entirely within the cartridge case, and the case is slightly reduced in diameter at its mouth. The barrel features a short conical section at its rear; this accepts the mouth of the cartridge, completing the gas seal. By sealing the gap, the velocity of the bullet is increased by 15 to 45 m/s (50 to 150 ft/s.) This feature also eliminates the possibility of injury through the dangerous expansion of gases from the cylinder behind the barrel, which are easily capable of severing a finger if the user holds the gun incorrectly (with a finger positioned in front of the cylinder during fire) - a noted safety-issue in conventional revolvers.
Moving on to some of the features incorporated into the Gletcher NGT NGT-R CO2 BB and Pellet Revolver that I did not point in any of my previous videos. There is an extractor rod that can be used to extract a shell, this is not really necessary on the airgun version since the shells do not expand and tighten on the cylinder as they would n the real steal Nagant M1895 Revolver built is nice that we can replicate this feature with the Airgun version. You can also remove the cylinder completely from both the BB and Pellet shooting Gletcher NGT NGT-R CO2 Revolvers. The cylinder is actually very heavy and adds a lot of weight to this compact 7 shot Revolver.
It is always nice when an Airgun is built in such a way that it replicates the real steal version as closely as possible and the Gletcher NGT NGT-R CO2 BB and Pellet Revolvers do this nearly perfectly.
I get asked on a daily bases form many of my Vimeo Viewers about how and if there is a way to get rid of the White lettering on Airguns, Typically people are wanting to remove the intrusive Warning instructions from Airguns like the Cybergun Tanfoglio Witness 1911, the Cybergun/Swiss Arms GSG 92/P92 and many other CO2 Replica Airguns that have lettering or branding that you may want to get rid of.
In this Instructional Tutorial Video I show you how can at least tone down the white lettering and even completely remove it on some Airguns without damaging the Airguns finish underneath the white lettering. You will have to use some patience and perhaps repeat this method a few times but the end result is worth the effort.
The magical product I use to remove the white lettering on many popular Airguns is a product from Birchwood Casey called the Presto Gun Blue Pen. This product is actually designed to touch up real steel gun in areas where the blueing has worn off, lucky for us the Birchwood Casey Presto Gun Blue Pen also works well to remove the ugly white lettering from Airguns.
I have often been asked which of the Shells for the Shell Loading Revolvers work in which Shell Loading Revolvers? After all many of them look a lot alike so can you mix and match Shells for the various types of Shell Loading Revolvers?
In this Vimeo Instructional Video I test out a bunch of Shells to see which ones actually will work or not work in several of the most popular Shell Loading Revolvers.
Some of the Shell Loading Revovers Tested in this Instructional Video are:
Dan Wesson Classic Revolver (BB, Airsoft, Pellet)
Dan Wesson 715 Revolver (BB, Airsoft, Pellet)
Colt Single Action Army Peacemaker (BB, Airsoft, Pellet)
Gletcher NGT and NGT-R (BB and Pellet)
Webley Mark VI (BB)
KWC 357 / Umarex 357 (BB, Airsoft)
G&G G731 (Airsoft)
