View fullsize

We stopped by the SABRE booth and spoke with Ashley about their Home Defense Pepper Launcher, specifically a second-generation version that (per Ashley) isn’t released yet. With less-lethal options getting more attention in Canada, I wanted to see what’s new, what specs we’re looking at, and whether it’s something we might be able to bring in for reviews and potential store availability.

What’s new with the Gen 2 (as described in the interview)

• “Quick Pierce” magazine system: Ashley demonstrated a faster “pierce and go” style setup, hit the control and you’re ready to aim.

• Pressure indicator: After piercing, an indicator pops out; as CO2 is depleted it retracts, giving you a visual cue that pressure is running out.

• CO2 release button: A control to vent the CO2, then remove the magazine.

Core platform details (current production specs for the .68 launcher family)

These are the commonly listed specs for the current .68 caliber SABRE launcher:

• .68 caliber projectiles

• 7-projectile magazine capacity

• Fiber optic sights (front/rear adjustable)

• Stated velocity up to ~350 FPS

• Range: direct impact effectiveness noted around 60 ft (18 m), with projectiles described as breaking/dispersion capability out to 175 ft (53 m)

Ashley also noted SABRE’s projectiles have a heavier payload than some competitors (in her words) to help with “strength” and accuracy.

Magazines, CO2, and shot count (from the interview)

• CO2 goes into the magazine

• 7 projectiles per magazine

• Two magazines per CO2 (so 14 shots)

Canada angle (what matters for importing)

• Ashley noted the current model is around ~20 joules, and said a Canadian version would likely need to be lower(depending on classification/import requirements).

• SABRE’s own online store states they do not ship internationally, including Canada (so any Canada availability would likely be via distribution/import channels rather than direct-to-consumer shipment).

If we can make the Canada piece work, this looks like a strong candidate for a hands-on review, especially because it’s .68 caliber, 7-round, and built around visibility (fiber optics) and ease of use.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

I was in Las Vegas last week for SHOT Show, filming content for Replica Airguns, but I wanted to post a quick update so you know what I was up to.

I went to SHOT Show to connect with people in the industry and record a bunch of interviews with vendors and companies, Airgun and aintball brands included (and more). I ended up filming about seven interviews, and now that I’m home I’ve got a lot of great footage to go through.

I was in Vegas with my buddy Steve (the guy behind the camera). Once the filming was wrapped, we spent some time enjoying the city after a busy week. We also did a few things outside of SHOT Show, because if you’re in Vegas, you might as well experience it.

In this video, we’re at the Montecristo Cigar Bar inside Caesars Palace, winding down with a nice port and a cigar.

Stay tuned,now that I’m back, I’ll start editing and posting those interviews. If you want to watch the SHOT Show interview series, head over to Replica Airguns or watch on our Vimeo and YouTube channels as I post them…

View fullsize

In this Table Top Review, we’re taking a detailed look at the KWC 18 CO2 Blowback Steel BB Pistol. This model is part of KWC’s long-running lineup of Glock-style pistols—some licensed through Umarex and others, like this one, produced without official Glock markings but clearly inspired by the platform.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow shortly.

I've reviewed many Glock-style CO2 blowback pistols over the years—Gen 3, Gen 4, Gen 5, Airsoft, Steel BB, full blowback, semi-blowback—you name it. KWC manufactures a large percentage of these frames and blowback systems, often for Umarex’s officially licensed Glock models. So while this KWC 18 isn’t a licensed Glock, it’s built by the same people behind many of the Umarex-branded models.

Let’s get into the details, compare it briefly to a couple of Umarex Glock versions, and then talk pros and cons.

View fullsize

Specifications

• Manufactured By: KWC – Made in Taiwan

• Power Source: 12g CO2

• Ammunition: 4.5mm Steel BBs

• Action: Full Blowback (Semi & Full Auto Selectable)

• Magazine: Full-size dropout metal magazine, 18 rounds (Model AAKC MM19)

• Trigger: Single-action-only style, short and light (Glock-like)

• Length: 203mm (8 inches)

• Barrel: 102mm (4 inches), smoothbore

• Weight: 1.7 lbs (771 g)

• Velocity: Up to 314 FPS under optimal conditions

• Sights: Front white dot; rear white half-rectangle

• Safety Systems:

  • Trigger safety (Glock-style)

  • Secondary safety located in the “serial number” plate under the barrel

• Hop-Up: Adjustable hop-up (rare for steel BB pistols)

• Rail: Under-barrel Picatinny rail for lights/lasers

• Field Strippable: Yes – Glock-style takedown system

View fullsize

In the Box

• KWC 18 CO2 Blowback Pistol

• 18-round full-size dropout metal magazine

• Allen key for CO2 tightening

• Small sample pack of steel BBs

• Instruction manual (loading, CO2 installation, hop-up access, takedown, jam clearing)

• Product guide / brochure

The packaging is similar to many Umarex Glock boxes—clean printed box with an internal molded insert.

View fullsize

Comparison to Umarex Glock Models

To give this pistol some context, here’s how it stacks up against a couple of current Umarex licensed Glock variants:

Umarex Glock 17 Gen 5 (Semi-Blowback)

• Has the MOS-style removable optic plate

• Features a semi-blowback system with shorter slide travel

• More efficient gas usage, higher FPS

• Double-action-style trigger (not Glock-accurate)

Umarex Glock 17 Gen 4 (Full Blowback)

• Full blowback with full travel slide

• Uses the same style of full-size dropout metal magazine

• Much closer in function to the KWC 18

• Fully licensed Glock markings

KWC 18

• Same full-blowback feel as the Gen 4

• No Glock markings (unlicensed)

• Adds full auto mode, which the Glock 17 models do not have

• Very similar weight, ergonomics, and trigger feel

• Slightly different slide shape, trigger guard, and frame cuts to avoid trademark conflict

If you’ve handled Umarex Glock models, this KWC 18 will feel instantly familiar.

View fullsize

Walk Around

The KWC 18 is extremely Glock-like in shape and ergonomics, with only small cosmetic changes:

• Slightly longer and differently shaped slide cuts

• Altered trigger guard shape

• Modified rail and frame geometry

• No Glock-branded markings anywhere

Controls are where you expect them to be:

• Slide catch/release on the left

• Trigger safety

• Takedown levers in the Glock position

• Selector switch for Semi / Full Auto just above the trigger area on the left side

• Under-barrel safety disguised as a serial number plate

Sights are classic Glock style:

• White dot front

• White “goalpost” style rear

The full-size dropout metal magazine fits tightly and locks back after the last shot. The slide feel is excellent—strong spring tension, clean metal-on-metal sound, no cheap clanking.

Field Strip

Field stripping is Glock-simple:

1. Lock slide slightly back

2. Pull both takedown tabs down

3. Slide comes forward and off

(Note: KWC pistols are often tight from factory, so the first removal may require a solid tap.)

Inside you’ll find:

• Full metal slide

• Return spring/guide

• Removable inner barrel

• Accessible hop-up wheel

• Fire control components including the semi/full auto mechanism

Reassembly is straightforward once parts are aligned correctly.

View fullsize

Pros

• Excellent weight and feel – solid, realistic, and well-balanced

• Full blowback provides snappy recoil and realistic slide movement

• Single-action Glock-like trigger is short, light, and crisp

• Full-size metal magazine for realistic reloads

• Semi & Full Auto modes (rare for BB pistols)

• Adjustable hop-up — unusual but useful for slight elevation tuning

• Field strippable, great for maintenance and realism

• Picatinny rail for lights/lasers

• Good trainer option for Glock owners thanks to similar ergonomics

• Minimal branding gives it a clean tactical look

Cons

• Full blowback reduces FPS and CO2 efficiency

• Full auto burns CO2 extremely fast

  • Expect maybe one strong magazine and a partial second depending on temperature

• CO2 cooling effects occur quickly during rapid fire

• Tight factory tolerances make the first field strip a bit stiff

• No official Glock markings (a con only if you want licensed branding)

View fullsize

Final Thoughts

The KWC 18 CO2 Blowback Steel BB Pistol is a very solid performer for anyone who wants a Glock-style CO2 pistol with full blowback realism—and especially for those who want the fun of full auto.

The build quality is strong, trigger feel is excellent, the slide operation is smooth, and the ergonomics match real Glock pistols closely enough to make this a legitimate training or plinking option.

If you already own Umarex Glocks, this model will fit naturally into your collection and may even share some compatible magazines (listed as AAKC MM19).

A full Shooting / Field Test Review is coming soon—these KWC/Umarex Glock-pattern pistols are always a blast to shoot.

Buy the KWC 18 BB Pistol

You can purchase this item from our Replica Airguns online stores:

• Canada

• United States

We carry a large selection of Umarex Glocks, KWC Glock-style pistols, airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading!
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.
More videos coming soon!

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine

View fullsize

Before I get into this Field Test Shooting Video for the Bug-A-Salt 3.0, make sure to watch my Table Top Video Review for it where I go into more details and specifications along with some nice close up video of it. In this Field Test Outdoor Shooting Video I test out the Bug-A-Salt 3.0 on some wrapping paper (Wrapping Tissue Paper) from various distances to see what damage the Bug-A-Salt 3.0 does to it. You do really need to get in pretty close to see significant damage, but if you where a small bug you would at bare minimum be stunned and immobilized waiting for that fatal kill shot.

View fullsize

I was hoping to go on a kind of Bug Safari Hunt out in the yard, so I did a dry run without my cameras running and I quickly found out that bugs in the wild are extremely elusive. They much prefer the comfort of your home which is of course the ideal location for using the Bug-A-Salt 3.0, but not great for shooting a video…

View fullsize

I was not able to record velocity or accuracy for that matter using the Bug-A-Salt 3.0 as it is more like a salt shotgun but as fate would have it, one very unlucky fly did land near by while I was recording, and it met its fate for the sake of this video. I also vaporized some butter cups (These are small yellow flowers that grow wild in the grass). All in all I was able to showcase the effectiveness of the Bug-A-Salt 3.0. My advice is to get in nice and close if you want a one shot kill, or you will have to take some follow up mercy shots.

• Buy the BUG-A-SALT 3.0 Salt Gun in Canada

• Buy the BUG-A-SALT 3.0 Salt Gun in the US

Before I get into this Field Test Video Review for the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol, make sure to watch my Table Top Video for it if you want information like Specifications and Details along with some more closer up video of it. The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol for some people will be a pretty entry level BB Pistol many might overlook but if you are simply looking for a Beretta 92 based Airsoft Pistol that is relatively inexpensive to buy and cheap to shoot. And if you don’t need quick semi auto shooting or anything ultra realistic, then the this Spring Airsoft Pistol could be an option for you.

In this video I test out the velocity, accuracy and I basic operation, so let’s get started with the velocity or fps portion of the testing. I loaded up the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol with a full 12 rounds of .12 gram Airsoft BB’s in the drop out magazine. I shot 5 rounds through my Chronograph hitting the following fps: 285, 288, 289, 292, 289, which averaged 289 fps. Umarex claims a velocity of up to 260 fps which I shot a bit over, but if you do plan on using more standard heavier .20 gram Airsoft BB’s, that numbers going to drop a bit perhaps in the mid or lower 200’s.

View fullsize

I then placed a brand new paper target on my backstop 30 feet down range and proceeded to shoot a full 12 round magazine into it using a semi rested shooting position, hands rested on a sand bag up front and sitting on a stool in the back. This generally gives me good stability while performing these field tests but there is always some human factor to take into consideration. I did not get a super impressive grouping, the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol likes to fling Airsoft BB’s around a bit resulting in around a 7 inch grouping. You can see the BB’s curl as they fly through the air. Using heavier Airsoft BB’s should help tighten up the grouping somewhat, but for all intents and purposes I did get all the shots onto my paper target which would represent a person’s mid section well. So if you were using this simple Airsoft Pistol for some fun war games with your friends, you would be able to hit a person easily from closer in ranges.

The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is really made for having some fun close range war games with your friends or even shooting pop cans I would say within 20 feet or so. It works pretty good overall with consistent velocity and predictable accuracy even if it is not super accurate. The fact that it is a clear gun makes it a lot less intimidating and for those with parents sitting on the fence about allowing their kids to get an Airsoft Gun, this one may nudge them into the more willing category. So it may come down to the simple fact that you can get this gun or no gun, if your parents are the limiting factor?

• Buy the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol in Canada

• Buy the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol in the US

Type: Airsoft Pistol.
Distributer: Umarex.
Model: Beretta Mod. 92 FS Spring Clear.
Materials: Mostly plastic build.
Weight: .5 pounds (227 grams).
Total Length: 8.5 inches (21.6cm).
Barrel: 4.5 inches (114mm), non-rifled.
Propulsion: Spring.
Action: Repeater/Single shot.
Ammunition Type: 6mm Airsoft BB's.
Ammunition Capacity: 12 round drop out magazine.
FPS: 260.

View fullsize

Trigger Pull: The single action only trigger pull on the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is actually pretty decent as all the work is mainly done cocking the hammer when you pull back the slide to preload the internal spring piston. There is about a half inch of take-up and then another quarter inch before you feel some tension on the trigger, and then about another quarter inch of pull where you can feel the pressure of the release. I would say overall it the weight is on the lighter side but the actual full length is long for a single action only trigger. There is no double action trigger so if you decock the hammer you can not shoot until the hammer has been cocked again.

Accuracy: I did quickly load up a 12 round magazine of Airsoft BB’s and give the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol a bit of a whirl to see what it shot and felt like. Airsoft BB’s did seem to get to the target fairly quickly, I did notice a few of them curve just a bit but they did all hit my paper target close to where I was aiming from 30 feet away. We will see how it shoots when I do make my Field Test Shooting Video for it down the road. I would say the 260 fps claimed velocity looks to be about right but again may actual Chronograph test will tell the true story.

View fullsize

Build Quality: The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is an almost all clear plastic built Airsfot Pistol with some scattered metal parts, like the the inner barrel, some springs and screws, and a chunk of metal in the magazine to give it some extra weight and balance. That said the actual fit and finish are good and it should hold up OK since an Airgun this light when dropped has very little mass which can protect it from damage in a fall or drop.

Realism: Again, being a mostly clear plastic Airsoft Pistol with an orange tip, makes this not so real looking as a Replica Airgun, but that is kind of the point here. It is realistic in terms of shape and design to that of a Beretta Mod. 92 FS but that’s about it, the weight is only about a quarter of the real steel version. The Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is made as perhaps a first time Airsoft Pistol for a younger shooter that may have parents that don’t want them getting anything too realistic looking and potentially getting into trouble with it.

View fullsize

Pros:

• Fairly low cost and comes with 500 Airsoft BB’s to get you shooting right away.

• Full size drop size weighted magazine is nice.

• All the parts feel pretty tight, does not feel overly cheap, has some metal parts where they are needed, barrel, springs, weigght in magazine.

• Red dot on front sights helps with target acquisition.

• No CO2 required, just your Airsoft BB’s.

• Beretta licensing via Umarex.

• Slide operates as it is required to cock the spring piston.

• Hammer is actually operational, can be decocted.

• Makes a good beginner pistol for someone getting into the hobby that may not want a gun that looks super realistic.

• Not super realistic being clear and having a red tip, so parents may be more open to buying and using for younger shooters.

Cons:

• It is on the light weight side.

• Does have an orange tip.

• Being a clear gun obviously takes away from the realism but that is the point of this gun so as not be confused with a real gun.

• Loading is a bit finicky.

View fullsize

Comments:

There is a place for an Airsoft Pistol just like this. Something not too realistic but close enough to give a newer shooter an idea of what it might feel like to shoot a gun like this. The price of the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol is reasonable to purchase and the cost to shoot it is low as you already have a bunch of Airsoft BB’s included, so you can get to blasting cans right away. The fact that you have to rack the slide with each shot means it will take a while to get through the initial 500 rounds that come with it, so again there is some cost saving with a setup like this. I think it makes an ideal first target Airsoft Pistol for younger shooters with concerned parents that may just get them into the hobby.

• Buy the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol in Canada

• Buy the Umarex Beretta Mod. 92 FS Spring Clear Airsoft Pistol in the US

Type: Airsoft AEG Rifle.
Manufacturer: Specna Arms.
Model: SA-FX02 FLEX.
Materials: Reinforced Polymer, Zinc Alloy, and Steel Construction.
Weight: 4.7 pounds (2.1 kg).
Total Length: 30-33 inches (76-84cm).
Barrel Length: 12.5 inches (32cm).
Barrel: Metal non-rifled.
Propulsion: AEG.
Action: Semi and full auto single action only programable trigger.
Hop-up: Rotary adjustable hop-up via ejection port.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 270 round full size drop out 9mm style plastic magazine.
FPS: 350-370.

View fullsize

Trigger Pull: The trigger on the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is typical of most AEG Airsfot rifles as it is essentially an off trigger that completes a circuit that signals the controller to use what every trigger programming has been setup by the user. What is unique with the Specna Arms SA-FX02 FLEX AEG Airsoft Rifles is the ability for the user to fully program the trigger with various semi and full auto setting, along with an adjustable trigger point and even a pre-cocking adjustment. Specna Arms does give you a plastic card that has all the setting listed to make programing easier.

View fullsize

Accuracy: I have not shot the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle or tested it out so far here in the Sea Can indoor shooting range, so I have no real idea in terms of accuracy or if it is close to the claimed 360 ish fps. I will be making a full dedicated Field Test Shooting Video for it shortly as soon as I am able to. This AEG Airsoft Rifle is specifically made for even advanced shooters so I would expect it to perform very well. Stay posted for that upcoming Field Test Shooting Video.

View fullsize

Build Quality: The Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is made to be a light weight and easy to cary Airsoft Rifle that will not break the bank, but still includes a lot of higher grade materials and parts internally like a Metal V2 Gearbox and MOSFET ETU. The outer skin is mostly plastic but it is fiber reenforced for added durability. You do get a 6.03mm precision inner barrel for increased accuracy along with other metal parts like the Picatinny Rails, Charging Handle, Bolt Release, Flash Hider, Assorted Pins, Rings and Screws.

View fullsize

Realism: The Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is built around an AR-15 (AR-9) based submachine gun (SMG). It is not built as a replica of any specific real steel model, but in terms of size and controls it operates much the same. It is lighter weight since the outer construction incorporates a lot of plastic but it still comes in at a decent weight for an SMG Airsoft Rifle.

View fullsize

Pros:

• Affordable yet very high quality product for what you pay. Perfect for all types shooters.

• Quality components throughout.

• Customizable trigger settings for sensitivity and shooting modes.

• Lots of color choices.

• 6 position rear stock.

• ESA™ quick spring change system makes spring changes quick and easy.

• Comes with two springs for potential indoor and outdoor usage.

• Plastic parts are fiberglass reenforced making them very durable.

• Quick release fully adjustable pop-up sights.

• No orange tips on our Canada Store versions.

• Lots of rial mounting options Picatinny rails top sides and bottom with M-LOCK.

• Metal V2 Gearboxes with metal gears and mostly all metal parts inside.

• Easy access to motor for any possible trouble shooting you may need to do.

View fullsize

Cons:

• Lots of plastic on this Airsoft Rifle makes it a bit light weight.

• Will need your own battery and charger setup.

• You will need a very compact battery setup with most Specna Arms models

View fullsize

Comments:

The Specna Arms SA-FX02 FLEX AEG Airsoft Rifle is specially built for beginners and more advanced users. How can this be? Well it is priced so someone getting into the hobby can afford it and see if this is something they might be interested in pursuing. Often times a first Airsoft Gun when priced lower is going to have a lot of compromises that can affect performance and use. With the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle, this is not the case. So why would a more advanced user want something like this? Maybe they have already invested a ton of money into their primary weapon, but want something a bit different, or even something they can beat up a bit and not feel bad about it. But they still want an Airsoft Rifle that performs. Well the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle kinda checks all those boxes. I hope I don’t eat my words when I make my Field Test Shooting Video so don’t let me down Specna Arms…

• Buy the Specna Arms SA-FX02 FLEX AEG Airsoft Rifle in Canada

• Buy Specna Arms Airsoft Rifles in the US

View fullsize

It’s been a while since I made a Field Test Shooting Video, probably well before I went to SHOT Show. I have been working on my SHOT Show 2025 Videos but those Interview Videos are all done and now it’s time to get caught up on some Field Test Shooting Video I have been wanting to make. So today I was able to make my Field Test Review Video for the Umarex DSX 45 Spring BB Pistol and for some this is a pretty entry level BB Pistol many might overlook but if you are simply looking for a 1911 based BB Pistol that is super inexpensive to buy, and cheap to shoot, and you don’t need quick semi auto shooting. Then the Umarex DSX 45 Spring BB Pistol Field Test Review could be an option for you. Make sure to watch my Table Top Review Video for the Umarex DSX 45 Spring BB Pistol for Details, Specifications, Pros and Cons and some nice close up video.

In this video I test out both the velocity and accuracy and I guess to some degree the usability so lets get started with the Velocity or fps portion of the testing. I loaded up the Umarex DSX 45 Spring BB Pistol with a half full hopper of 4.5 mm Steel BB’s, so around 100 BB’s which is way more than I needed and I shot 5 rounds through my Chronograph hitting the following fps: 191, 193, 188, 195, 197 which averaged 193 fps. Umarex claims a velocity of up to 240 fps which I think is a bit high as temperature is not even a factor with a spring piston Airgun, so warmer conditions will not really make much of a difference here.

View fullsize

I then placed a brand new paper target on my backstop 30 feet down range and proceeded to shoot 10 rounds into it using a semi rested shooting position. Hands rested on a sand bag up front and sitting on a stool in the back. This generally gives me pretty good stability while performing these tests, but there is always some human factor to take into consideration. I was not all that impressed with the grouping I got, the Umarex DSX 45 Spring BB Pistol likes to fling BB’s around a bit. You an see them curl so maybe some miscellaneous spin is being added in the barrel but it is not a consistent spin so the BB’s kind of spray all over the target that ended up giving me around a 8 inch grouping. Usually I can get around a 2 inch grouping with a BB Pistol that is generally what I would consider to be good accuracy.

I wish the Umarex DSX 45 Spring BB Pistol Field had hit closer to the 240 claimed fps and was also a bit more accurate as it would then be more usable at the 30 foot range I tested it at. I would suggest if you buy or own this BB Pistol, that you shoot it at targets closer in at 10-20 feet as the poor velocity and accuracy would be a lot less noticeable at these ranges and for that purpose it would be just fine. If you want a super low cost BB Pistol option that is also a decent looking 1911 Replica, and that you don’t need to go out and buy any CO2 to use it. Then take a look at one in our Replica Airguns Online Store. Heck, it’s only $19 US and $29 CAN right now!

• Buy the Umarex DSX 45 Spring BB Pistol in Canada

• buy the Umarex DSX 45 Spring BB Pistol in the US

View fullsize

Type: Pump Spring Piston.
Manufacturer: BUG-A-SALT.
Model: BUG-A-SALT 3.0.
Materials: Metal and plastic.
Weight: 1.5 pounds (680 grams).
Total Length: 21.5 inches (54.6cm).
Barrel Length: 8 inches (20.3cm).
Barrel: Plastic non-rifled.
Propulsion: Spring.
Action: Pump SAO.
Effective Distance: 3 feet.
Ammunition Type: Standard table salt.
Ammunition Capacity: 80 round hopper.
FPS: NA.

View fullsize

Trigger Pull: The trigger pull on the BUG-A-SALT 3.0 Salt Gun is a Single Action Only trigger that requires you to work the pump action to load salt and prepare the hammer to fire in Single Action. There is a little bit of takeup and then a medium trigger pull weight that is about right for a pest control tool like this, as you do not want a super light trigger that could go off unintentionally. When you work the action using the pump, the real sight also pops up not only so you can use it but also to indicate that the BUG-A-SALT 3.0 Salt Gun is loaded and ready to fire.

View fullsize

Accuracy: So far I have not fired or tested out the BUG-A-SALT 3.0 Salt Gun as it is not the time of year for bugs just yet, so that portion of my review is going to have to wait until at least spring time when the bugs and flies come out in full force. I will not be making my traditional Field Test Shooting Video where I shoot at a Paper target setup 30 feet away, or even testing out the velocity in fps as the BUG-A-SALT 3.0 Salt Gun is only rated to shoot up to 3 feet away and I’m not sure how a blast of salt would even be read by a Chronograph or if that information is even important for a fly exterminator like this. I will be making some sort of shooting video for the BUG-A-SALT 3.0 Salt Gun when I am able to find bugs to blast…

View fullsize

Build Quality: The BUG-A-SALT 3.0 Salt Gun is made out of mostly plastic with I assume some metal working parts internally. Even the internal barrel is plastic since you are only shooting salt. The BUG-A-SALT 3.0 Salt Gun does feel solid and the working parts like the pump action, trigger and safety feel durable enough. The salt hopper lid may be a bit flimsy and if that breaks I’m not sure how one would keep the salt in the hopper?

View fullsize

Realism: The BUG-A-SALT 3.0 Salt Gun is not a replica gun to speak of, it kind of looks like a pistol grip pump action shotgun but there is really no way I feel anyone would mistake the BUG-A-SALT 3.0 Salt Gun for a real gun, this is probably good since you may want to keep it out lying around in your house for when you may need to do some bug blasting.

View fullsize

Pros:

• Very unique product, not a lot of competition in the market.

• Makes eliminating flies and bugs a lot more fun, would be fun at get togethers or parties.

• Fairly well built, feels solid and durable.

• Low cost to operate, only requires table salt.

• Can get up to 80 shots per loaded salt hopper.

• Can shoot flies up to 3 feet away.

• Easy to access cross bolt safety.

• Auto pop-up rear sight lets you know it is loaded and ready to fire.

• SAO Trigger is relatively decent.

• No bug guts mess to cleanup.

View fullsize

Cons:

• Not suitable for larger bugs with hard exoskeletons like wasps or larger. Really only meant for flies.

• Not a toy as it could be assumed it is. So be careful around kids as an eye shot could be very painful and cause injury.

• Price is a lot more than a fly swatter that also gets the job done.

View fullsize

Comments:

If you hate flies as much as I do and would like a more sportsman like way to eliminate them rather than your standard fly swatter that basically mushes the fly into a bloody mess on what ever surface you mash it into. Then perhaps something like the BUG-A-SALT 3.0 Salt Gun may be just perfect for you. I am hoping it works as good as the advertising says it does. Based on some of the reviews I have watched it seems ideal for flies but may not so good for larger insects with hard exoskeletons. You are going to pay a lot more for the BUG-A-SALT 3.0 Salt Gun than a dollar store fly swatter will cost you, but I can guarantee you will have a lot more fun using it and no need for the messy bug juice clean up after a kill shot.

• Buy the BUG-A-SALT 3.0 Salt Gun in Canada

• Buy the BUG-A-SALT 3.0 Salt Gun in the US

This will be my final Interview Video for SHOT Show 2025. I did get to talk with someone from Crosman but the Daisy rep was not around totally with so I did my best to talk about a couple of the Daisy products that I felt were interesting. If you are not aware, Crosman and Daisy have now joined forces together along with Gamo, Benjamin and SPLATRBALL so all of these product were on display at the Crosman Daisy Booth. I focussed on the Crosman M1 Full Auto Carbine and their updated all black ST1 Full Auto BB Rifle. We then took a look at some of the Game Face Airsoft Products and then I performed my own Interview/Review for Daisy talking about the Woodland Trail Model 1911 and Model 25 Lever and Pump Action BB Rifles.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

We recently picked up the Steambow line of Compact Crossbows and I have already made a Table Top Review for some of their products. So far I had not shot or tested any of the Steambow product line yet and so it was nice to get the chance to shoot a few different models over in the Archery Pavilion at SHOT Show and also talk with Tobias their product specialist. I did get the chance to drop by the Steambow Booth and talked with the Steambow team and founder about some of their new products coming out including a new Rubber Ball crossbow they are working on that should be coming out in the near future.

I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.

Luckily I was able to find some time with James again this year and James gave us all the new details on some of the KWA updated and new products. Starting with the KWA ATP-Z Blowback Airsoft Training Pistol added recently to the KWA lineup, James also showed us a few versatile Carbine Pistol Kits made specifically for the ATP-Z and ATP-GT Pistols. Not yet fully released, James went over their updated TAC-9 hopefully coming out this year. We then got a nice tour of the updated Radian Model 1 AEG Airsoft Rifle with built in recoil system also built into KWA’s Q10 AEG Airsoft Rifle.

I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.