View fullsize

Today, we are putting the Specna Arms SA-F249 to the test. If you haven't seen one yet, be sure to check out the detailed tabletop review and the outdoor shooting video I've already posted. Today, however, is all about the hard numbers. We are bringing it into the indoor sea can to check the chronograph performance and see what kind of accuracy we can squeeze out of this absolute beast on paper. Let's get right to it.

Chronograph Velocity Test

To start things off, I loaded up some quality 0.25g airsoft BBs to run through the chrony. This setup currently has a standard voltage adaptor, for the LED lighting system though my usual one died on me, so I’m running an adjustable voltage adapter.

After a brief, accidental full-auto burst (remember, this is a support weapon designed to lay down cover!), we dialed it in for some attempted single shots (super short trigger pulls) to get our baseline velocity readings.

Chronograph Results (0.25g BBs):

• Shot 1: 363 fps

• Shot 2: 364 fps

• Shot 3: 365 fps

• Shot 4: 362 fps

• Shot 5: 363 fps

• Shot 6: 365 fps

The consistency here is phenomenal. We are sitting right in that 363 to 365 fps sweet spot. For an AEG out of the box, seeing variance of only a couple of feet per second between shots is a testament to the internal air seal and overall build quality.

Full-Auto Accuracy Test

With the velocity dialed in, it was time to set up a paper target downrange. Because this is a sport based automatic weapon, there's no semi-auto selector that I could locate, it's meant to be fired in full auto, and that’s exactly how we tested it.

Instead of the massive 1500-round box magazine it comes with, I opted to run a standard AR-15 style magazine for this indoor test. I locked it in, aimed just below the center of the target, and let the spring unwind until the mag the spring could not push anymore Airsoft BB’’s out, dumping roughly 50 to 75 rounds in one continuous burst.

View fullsize

The Results: Absolutely incredible. For a full-auto dump of that size, you would normally expect the BBs to spray across the paper. a little bit Instead, the Specna Arms SA-F249 punched a jagged, blown-out hole right through the target, resulting in a remarkably tight 2-inch grouping.

To pump that many rounds into such a condensed area on full auto is outstanding. It proves that this gun isn't just about suppressing fire; it provides highly accurate, concentrated fire downrange.

Final Thoughts

The Specna Arms SA-F249 is an incredibly impressive piece of kit. It delivers laser-like consistency on the chronograph and lays down surprisingly tight groupings in full auto. If you are looking for a support weapon that doesn't compromise on accuracy, this one needs to be on your radar.

Where to Buy: If you want to pick one of these up for yourself, or check out our other gear, head over to our stores:

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

Thanks for tuning in and supporting the channel! Be sure to like, subscribe, and follow us for more reviews and shooting tests across YouTube, Rumble, Vimeo, Facebook, Twitter, and Instagram.

Take care, and we'll see you in the next one!

View fullsize

Today, we are checking out the second-generation Lil' Sure Shot Annie Oakley BB Rifle. This is essentially a Red Ryder-styled, spring-powered BB rifle.

If you are interested in seeing how this looks up close along with the specifications and details, make sure to check out the table-top video. Today is going to be all about shooting it.

Chronograph Velocity Test

To get started, I needed to warm up the chrony, which took a little bit of troubleshooting. I had an ongoing voltage issue with my chronograph lighting and had to use a voltage regulator set to almost exactly 7 volts to get it to work properly without a proper adapter.

Once the chrony was up and running, I put several rounds through the rifle to test the velocity. The velocity remained pretty consistent in the mid-300s, with shots recording at 341, 340, 333, 329, 334, and 332 fps. averaging out at 334.

View fullsize

Target Accuracy Performance

For the accuracy portion of the test, I set up a paper target 30 feet down range. Here is how the rifle performed:

• Grouping: After firing about 10 shots, the rifle got just over a two-inch grouping.

• Placement: The shots were well-centered from left to right, though it shot a little high even when aiming just under the bullseye. I noticed a few stray BBs came back, which happens if they hit metal instead of the cloth backboard, causing some high flyers. (This could of been me as the bulk of the shots all grouped really nicely)

• Sights & Adjustability: It can be a little tough on the eyes aiming black front and rear sights on a target when you need readers for most things, which may have contributed to some of those shots hitting slightly higher. You can adjust the elevation slightly by moving a little piece on the sight backward and forward to raise or lower it. The rifle also features a dovetail, allowing you to mount a nice optical sight or a red dot.

Trigger Pull & Feel

• Pull Weight: The trigger pull comes in at around 5 to 6 pounds.

• Action: It is fairly short with a pretty predictable break.

• Usability: It requires a little effort, but it is not a super hair trigger, making it perfect for youngsters who are just starting out with shooting.

Conclusion

Overall, the Annie Oakley Lil' Sure Shot delivers exactly what you want out of a classic, Red Ryder-styled spring-powered BB rifle: it's straightforward, reliable, and just plain fun to shoot. While you aren't going to get competition-level precision out of a smoothbore BB gun, holding a solid two-inch grouping at 30 feet and putting out very consistent mid-300s fps velocities proves that it is more than capable of handling your everyday plinking or indoor target practice.

What really makes this rifle shine is its accessibility. With a predictable 5 to 6-pound trigger pull that requires deliberate effort without being a super hair trigger, it is a fantastic option for youngsters who are just learning the fundamentals of shooting. Plus, the inclusion of a dovetail mount means there is room to grow with the shooter, you can easily slap a red dot on there if the standard black iron sights prove a bit too tough on the eyes against various target. If you are looking for an entry-level plinker that performs right where it should, this second-generation Lil' Sure Shot is a great place to start.

If you want to pick one of these up, links are in the description to buy in both Canada and the US.

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

View fullsize

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol takes the already popular P320 platform and adds a more tactical, competition-inspired look with the Spectre Comp styling. In this Field Test Review, I focused mainly on real-world shooting performance including velocity, accuracy, trigger feel, blowback action, and overall handling. If you want all the detailed specifications and close-up overview footage, make sure to also check out my Table Top Review video for this model.

For this test I used standard Sig Sauer lead pellets, estimated around 7–8 grains rather than lightweight alloy pellets, giving a more realistic idea of what shooters can expect during normal use. Despite some chronograph frustrations during testing, the pistol delivered fairly consistent velocities once everything settled down. Average readings for my five shots through the Chronograph came in at 270 FPS, with highs reaching about 286 FPS during the initial shots and my slowest shot was 260 FPS. Considering the cooling effect common with CO2-powered airguns, the consistency was actually quite respectable for a blowback pellet pistol.

Accuracy testing was performed at 30 feet using a standard paper target. I fired a full 10-shot group and overall results were solid for a blowback pellet pistol with a higher-capacity belt-fed magazine system. Most shots grouped within roughly 2 inches, although the full spread opened up closer to 2.5–3 inches when including a couple lower shots likely caused by slight velocity variation from CO2 cooldown. Horizontal consistency was very good, with only a slight tendency to drift left. For a rapid-fire capable CO2 pistol with blowback, the accuracy was more than acceptable.

View fullsize

One thing worth mentioning is the trigger feelof the Sig Sauer Spectre Comp. Since the trigger system also advances the pellet belt during firing, there is naturally a bit more friction and a slightly longer pull compared to some rotary magazine designs. Even so, the trigger never felt excessively heavy or unpleasant. Rapid follow-up shots were still easy to manage, and the realistic blowback action adds a lot to the shooting experience.

The 20-round belt-fed magazine system is one of the biggest advantages of the Spectre Comp over many traditional rotary magazine pellet pistols. Instead of dealing with smaller 8-shot or flip-around style magazines, you get a much more enjoyable shooting session with fewer reload interruptions. Combined with the realistic weight, solid balance, and satisfying blowback recoil impulse, this pistol ends up being a very fun and practical option for target shooting and action-style plinking.

If you are looking for a realistic training-style pellet pistol that combines blowback action, higher magazine capacity, and solid handling characteristics, the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol is definitely worth checking out. It offers a nice balance between realism and shooting fun while still delivering respectable accuracy and consistency for casual target shooting.

You can find more information about Airguns, BB guns, Pellet guns, Airsoft guns, Blank guns, and accessories over at Replica Airguns Canada and Replica Airguns US.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer P320 Blowback Pellet Pistol in the US

View fullsize

The Umarex T4E TP50 Gen 2 continues to impress as one of the more powerful and practical compact less-lethal pistols currently available. In this field test review, I tested the all-black version using .50 caliber rubber-steel core rounds to see how it performs in terms of velocity, energy, and real-world accuracy. The black version is essentially the same as the orange-marked variant, just marketed a bit differently, with a more tactical appearance that may appeal to those looking for a serious training or home defense-style option.

For ammunition, I used the steel-core rubber balls rather than standard solid rubber rounds. These projectiles are slightly heavier and seem to carry noticeably more energy downrange without sacrificing too much velocity. In my opinion, they are probably some of the best ammunition choices for these types of pistols if maximum impact energy is your goal.

Velocity testing through the chronograph produced some very impressive numbers. The TP50 Gen 2 delivered readings of 319 FPS, 304 FPS, 310 FPS, 300 FPS, and 308 FPS, averaging just over 308 feet per second. With the steel-core rubber rounds weighing approximately 2.7 grams, the pistol produced roughly 12-13 Joules of muzzle energy using the Steel Core Rubber Balls but would have been closer the projected 15 Joules with all Rubber Balls, which is extremely respectable for a compact CO2-powered .50 caliber launcher. You can really hear and feel the power when firing this pistol, and it even generates noticeable recoil-like kick during shooting.

View fullsize

Accuracy testing was performed from 30 feet downrange using the six-round internal magazine. Paintball-style projectiles are naturally less precise than pellets or BBs due to their softer construction, surface ridges, and aerodynamic inconsistencies, but the Umarex T4E TP50 Gen 2 still delivered surprisingly solid grouping performance. After adjusting my aim slightly low due to the pistol shooting a little high initially, the remaining shots grouped well into the center portion of the target and produced clean, sharp holes through the paper target with about a 3 inch grouping.

In practical terms, this pistol clearly delivers enough impact energy to strongly discourage an attacker or aggressive threat. The steel-core rubber rounds hit extremely hard, especially considering the combination of high velocity and projectile mass. While heavy clothing would certainly absorb some impact, anyone wearing lighter clothing would absolutely feel these rounds. The all-black appearance also adds to the realistic tactical styling, which alone could act as a deterrent before a shot is ever fired.

Overall, the Umarex T4E TP50 Gen 2 proved to be accurate enough for close-range defensive-style use, delivered excellent power, and offered reliable operation throughout testing. The trigger feels good, the pistol handles nicely, and the performance with steel-core rubber ammunition was impressive across the board. For anyone looking for a compact CO2-powered less-lethal launcher with strong energy output and solid build quality, the TP50 Gen 2 is definitely worth considering.

You can find the Umarex T4E TP50 Gen 2 and other Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and accessories at:

• Buy the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol in Canada

• Buy Paintball Guns in the US

Despite a rocky start, my test with the Specna Arms SA-F249 machine gun did yield some eventual results. Initially, I set up multiple cameras (Three Sony Cameras, Insta360 X4, DJI Neo 2, Looki L1, Meta Ray-ban Gen 2) and planned a full-auto session aiming to empty the 1500-round magazine on a boat load of water filled cans. Unfortunately, the magazine’s feed malfunctioned, preventing the gun from firing as intended. Even so, I pivoted, swapping in an AR-15 magazine and still managed to get some satisfying shots on target. at the end of the video

It’s all part of the process: sometimes you get a lemon, but that doesn’t mean the day is totally lost. We did confirm that the gun itself works very well, and I hope to be revisiting this test with a new 1500 round magazine to give it a proper go. For now, at least we got a bit of action on those water-filled cans. Stay tuned for a follow-up, because I’m determined to show this LMG at its full potential!

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

View fullsize

The support weapon role in airsoft has always had a certain appeal, and the Specna Arms SA-F249 definitely delivers that intimidating LMG presence right out of the box. This massive AEG support rifle is styled after the legendary FN M249 platform and brings together high-capacity firepower, aggressive looks, and surprisingly good value for players wanting something beyond the typical AR-style airsoft rifle.

At first glance, the SA-F249 looks huge, but despite its size, it’s actually lighter than expected thanks to its reinforced polymer construction. Even so, it still feels substantial in the hands and gives off that true support weapon vibe the moment you shoulder it.

The version reviewed here comes equipped with the GATE X-ASR MOSFET system, a 1500-round auto-feeding electric box magazine, quick spring change capability, adjustable stock, integrated bipod, and multiple Picatinny rail sections for optics and accessories.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: SA-F249 Machine Gun AEG

• Platform Style: FN M249 Inspired Support Weapon

• Caliber: 6mm Airsoft BB

• Action: Electric Automatic (AEG)

• Magazine Capacity: 1500 Round Auto-Feeding Box Magazine

• FPS: Approximately 390 FPS

• Weight: 9.15 lbs / 4150g

• Length: 32–37 inches Adjustable

• Inner Barrel Length: 340mm

• Hop-Up: Adjustable Rotary Hop-Up

• Gearbox: Version 2 Gearbox

• MOSFET: GATE X-ASR Installed

• Threading: 14mm Counter-Clockwise

• Construction: Reinforced Polymer and Metal

• Battery Connector: Deans (Comes with adaptor)

• Battery & Charger: Not Included

View fullsize

First Impressions

One of the first things noticed during the review was how different some components appeared compared to other online reviews. Some reviewers mentioned metal rear stock components while others claimed certain barrel sections were plastic. On this specific version, the rear stock assembly was definitely polymer, while the outer barrel appeared to be metal.

This kind of variation is fairly common with airsoft manufacturers over time as revisions and production updates happen.

Even with the extensive use of polymer, the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle still looks impressive and feels well-balanced considering its overall size. The carry handle, outer barrel, and several internal components are metal, while much of the receiver, stock, and furniture use reinforced polymer to help reduce overall weight.

View fullsize

Electric Auto-Feeding Box Magazine

The standout feature on the SA-F249 is definitely the included 1500-round electric auto-feeding box magazine. This is what transforms the rifle into a true support platform capable of sustained suppressive fire during milsim games or outdoor skirmishes.

The magazine runs on AA batteries and includes three operating modes:

• Off

• Auto

• Sound Control

The “Auto” mode activates the winding mechanism whenever the trigger is pulled, while the “Sound Control” mode intelligently detects pitch changes from the gearbox to determine when BBs stop feeding, automatically rewinding the internal spring system as needed. It’s actually a pretty clever setup and adds a lot to the realism and usability of the rifle.

Another nice touch is that the SA-F249 remains compatible with standard M4-style AEG magazines, allowing emergency reloads if needed.

View fullsize

Build Quality and Construction

The reinforced polymer construction helps keep the SA-F249 from becoming excessively heavy, especially for extended gameplay sessions. While some players may prefer more metal components for realism, there are advantages to quality polymer construction as well.

Polymer can sometimes absorb impacts better than brittle zinc alloy “pot metal” components commonly found in lower-end airsoft guns. The lighter weight may also reduce stress during accidental drops.

That said, there are still some concerns about long-term durability in specific areas, especially considering the rifle’s size and weight. I feel certain parts like the bipod and rear stock would have benefited from additional metal reinforcement.

View fullsize

Quick Spring Change System

The SA-F249 also includes a quick spring change system for easier FPS adjustments. Accessing the spring requires removing the rear stock assembly by pushing out the rear pins.

While the feature itself is excellent, the review sample had extremely tight rear pins that required minor drilling of the polymer mounting holes to improve fitment. Once removed, however, spring access was relatively straightforward.

Field Role and Gameplay Potential

The Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle is clearly designed for players wanting to fill a support gunner role. The large magazine capacity, full-auto-only operation, integrated bipod, and intimidating LMG profile make it ideal for suppressive fire and milsim gameplay.

At roughly $400 Canadian, the SA-F249 also offers surprisingly solid value considering what’s included. Many mid-range AR-style AEGs can already approach the $200–$300 range, making the jump to a dedicated support weapon platform more reasonable than some players might expect.

View fullsize

Pros

• Super cool!

• High-capacity 1500 round auto feeding system.

• GATE X-ASR™ MOSFET improves trigger response and protects electronics.

• Quick spring change system allows for somewhat easy FPS tuning.

• Durable reinforced polymer and metal construction.

• Adjustable stock helps stability and comfort.

• Multiple rail sections for optics and accessories.

• LMG styling and handling make it ideal for support roles and milsim use.

• Compatible with M4 style magazines.

• Integrated bipod and carry handle add realism and functionality.

• Strong overall value for a support weapon platform.

View fullsize

Cons

• Large and heavy compared to standard AR style AEGs.

• Box magazine can be bulky and somewhat noisy.

• Battery and charger sold separately.

• Lots of plastic, may experience durability issues.

• Rear stock pin fit may require drilling out.

View fullsize

Final Thoughts

The Specna Arms SA-F249 Machine Gun AEG is a very cool support weapon platform that delivers a strong mix of realism, functionality, and affordability. It may not be perfect, and some players will likely wish for more metal construction, but overall it offers excellent value for anyone wanting to step into the LMG support role without spending a fortune.

The 1500-round auto-feeding system alone will make this thing a blast to use, and combined with the MOSFET, quick spring change system, adjustable stock, and M4 magazine compatibility, the SA-F249 brings a lot to the table for milsim and support gun enthusiasts alike.

A full field test shooting review should be especially interesting with this one.

• Buy the Specna Arms SA-F249 FN Machine Gun AEG Airsoft Rifle in Canada

• Buy Airsoft Rifles in the US

View fullsize

First Look & Overview

In this table top review, taking a detailed look at the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol, a modern, competition-style airgun replica that closely mirrors its real steel counterpart. This model stands out with its aggressive styling, compensated muzzle, and optics-ready slide, making it one of the more premium-looking pellet pistols currently available.

This is a pellet-only airgun with blowback action, designed more for realism and handling than raw velocity. If already familiar with the Sig Sauer M17 pellet pistol, this one shares a lot of mechanical similarities, including the magazine system.

Specifications

• Caliber: .177 Pellet

• Action: Semi-auto, blowback

• Magazine: 20-round belt-fed rotary system

• Power Source: 12g CO2 (tool-free cam lever system)

• FPS: Claimed 340 FPS

• Weight: ~2.3 lbs

• Overall Length: 8.5 inches

• Barrel Length: 4.6 inches (rifled)

• Construction: Metal slide, polymer frame

• Sights: Fixed white dot front and rear

• Optics Ready: Yes (SIG Air RMR compatible)

• Rail: Picatinny accessory rail

• Safety: Ambidextrous manual safety

View fullsize

Build Quality & Design

The Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol delivers a solid mix of metal and polymer construction. The metal slide gives it realistic weight and feel, while the polymer frame helps keep things balanced. At around 2.3 pounds, it has a substantial presence in hand without feeling overly heavy.

The grip features enhanced texturing along with a flared magwell, adding to both aesthetics and usability. The slide includes light porting and is optics-ready, allowing for easy installation of a SIG Air RMR red dot.

One standout visual element is the compensated muzzle, which adds to the competition-style look. However, it also impacts field stripping, you’ll need to remove it to fully disassemble the slide.

View fullsize

Magazine & CO2 System

This pistol uses a 20-round belt-fed rotary magazine, which is housed within a drop-out mag body. Loading is straightforward:

• Remove the rotary belt insert

• Load pellets into each chamber

• Reinsert into the mag

CO2 is loaded using a tool-free cam lever system, which is fast and convenient compared to traditional screw-in designs.

Important note: the magazine needs to be firmly seated. A light insertion may not lock it properly, and due to the weight, it could fall out if not fully engaged.

Also worth noting, while the outer mag housing has some polymer components, the internal structure is mostly metal. Still, avoid dropping it on hard surfaces.

View fullsize

Handling & Controls

• Ambidextrous safety works from both sides, though visual indicators are only clearly marked on one side

• Trigger feels closer to double-action due to the rotary magazine indexing

• Slide cycles with blowback but does not lock back when empty

• Takedown lever is present, but full disassembly is limited by the compensator

The trigger has a solid feel and requires deliberate pull due to the indexing mechanism. This is normal for belt-fed pellet systems.

View fullsize

Sights & Optics

The pistol comes with fixed white dot sights, which are effective for quick target acquisition. However, they are not adjustable.

For those wanting more precision, the pistol supports SIG Air RMR optics, replacing the rear sight with an included plate.

Performance Expectations

The claimed velocity is 340 FPS, which is typical for blowback pellet pistols. Expect slightly lower speeds with lead pellets (recommended) compared to alloy pellets.

Blowback operation will also consume more CO2 than non-blowback models, trading efficiency for realism.

If looking for a performance reference, similar results can be expected to the Sig Sauer M17 pellet pistol due to shared internals.

View fullsize

Pros

• Excellent replica accuracy of the P320 Spectre Comp

• Realistic blowback with metal slide

• Good weight and balance (~2.3 lbs)

• 20-round high-capacity pellet magazine

• Tool-free CO2 cam lever system

• Rifled barrel optimized for pellet shooting

• Optics-ready (SIG Air RMR compatible)

• Flared magwell and enhanced grip texture

• Picatinny rail for accessories

• Magazine compatibility with M17

Cons

• Lower FPS compared to non-blowback pellet pistols

• Higher CO2 consumption due to blowback

• Fixed (non-adjustable) sights

• Pellet-only (no BB capability, though this protects rifling)

• Slide does not lock back when empty

• Field stripping requires compensator removal

View fullsize

Final Thoughts

The Sig Sauer P320 Spectre Comp pellet pistol is a strong option for anyone prioritizing realism, handling, and modern styling over raw power. It delivers a premium look with solid functionality, especially for training, backyard shooting, or collectors wanting a high-end replica.

While not the most powerful pellet pistol available, it excels in design, usability, and realism, especially if already a fan of the P320 platform.

For those in Canada, availability may already be live, with US availability likely to follow.

• Buy the Sig Sauer P320 Spectre Comp CO2 Blowback Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

A surprise “tiny box” delivery turned out to be a solid addition to the lineup, the SIG Sauer P320 Spectre Comp Pellet Pistol. Despite the small packaging, this is a full-featured CO2-powered pellet pistol with a strong focus on realism and competition-style design.

Right out of the box, the Spectre Comp feels substantial, coming in at around 2.29 lbs with a metal slide and polymer frame. It features a semi-auto blowback action and uses a 20-round belt-style pellet magazine, typical of SIG’s higher-capacity pellet systems.

Key highlights include:

• CO2 powered (.177 caliber pellet)

• Blowback action (semi-auto)

• 20-round belt magazine

• Approx. 340 FPS velocity

• Optics-ready slide (RMR plate compatible)

• Ambidextrous safety and controls

• Flared magwell for faster reloads

• Picatinny accessory rail

• Field-strip capable design (with compensator removal)

View fullsize

The pistol leans toward a competition-style setup, featuring a skeletonized trigger, ported slide, and a compensated front end for aesthetics. While the slide does not lock back (common for belt-fed pellet systems), the blowback adds to the overall shooting realism.

Loading is straightforward thanks to the tool-free CO2 system and two-piece magazine design. The trigger pull feels more like a double-action due to the belt cycling, which is typical for this platform.

Overall, the P320 Spectre Comp CO2 Blowback Pellet Pistol looks to be a well-built, feature-rich option for those wanting a realistic training pistol with added competition styling. A full tabletop review and field test shooting results will follow once it’s put through proper testing.

• Buy the SIG Sauer P320 Spectre Comp Pellet Pistol in Canada

• Buy Sig Sauer Airguns in the US

View fullsize

In this table top review, we’re taking a detailed look at the Specna Arms SA-F04 Flex AEG Airsoft Rifle. This is not a shooting test, field testing will come later, but this overview will cover specifications, build quality, features, and overall pros and cons so you can decide if it’s a good fit for your needs.

I can say that right out of the box, this rifle offers a strong balance between price, performance, and features, especially for players looking for a lightweight AR-style platform with modern internals.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: SA-F04 Flex

• Platform: AR / M4 Style

• Caliber: 6mm Airsoft BB

• Action: Semi / Full Auto

• Magazine Capacity: ~380 rounds (high-cap, spring-fed with winder)

• Velocity: ~380 FPS (M120 spring installed)

• Weight: ~4.7 lbs (≈2.1 kg)

• Length: ~27–30 inches (adjustable stock)

• Inner Barrel: ~6.03mm tight bore

• Outer Barrel Length: 9 inches

• Threading: 14mm CCW

• Gearbox: Version 2

• Hop-Up: Rotary style (TDC Magnus)

• MOSFET / ETU: Yes (HAL system)

• Spring System: ESA Quick Change

• Battery Recommendation: 11.1V LiPo

• Construction: Reinforced Polymer receiver with metal components

View fullsize

Build Quality & Design

The SA-F04 Flex uses a reinforced polymer receiver for both upper and lower, keeping the weight down while still maintaining durability. Key stress components, such as the outer barrel, buffer tube, and controls—are metal where it matters most.

This approach results in a rifle that feels solid without being overly heavy. It’s a practical design choice, polymer absorbs impact better than cheaper pot metal, which can crack or chip under stress.

You also get:

• Ambidextrous selector switch

• Metal buffer tube

• M-LOK handguard with Picatinny rail

• Adjustable iron sights (windage & elevation)

• Multiple sling mount points

View fullsize

Features Overview

ESA Quick Spring Change System

Allows you to swap springs without full disassembly, useful for adjusting FPS for indoor vs outdoor play.

HAL ETU / MOSFET System

Improves trigger response, protects electronics, and allows programmable trigger settings.

Rotary Hop-Up (TDC Magnus)

Provides consistent BB trajectory and improved accuracy.

Version 2 Gearbox

A widely used, reliable platform with good upgrade compatibility.

View fullsize

Included in the Box

• SA-F04 Flex AEG Rifle

• High-cap 380-round magazine

• M90 spring (lower FPS option)

• Orange plastic flash hider (installed but also comes with metal black flash hider)

• Cleaning / jam rod

• HAL programming card

• Manual (QR code download)

• Stickers and packaging materials

View fullsize

Important Setup Note (Very Easy to Miss)

Before using the Specna Arms SA-F04 Flex AEG Airsoft Rifle, you must activate the trigger system:

• Connect battery

• Set to safe

• Hold trigger for ~5 seconds until you hear a beep

If you skip this step, the rifle will just beep three times and not fire, making it seem defective.

Performance (Initial Impressions)

With an 11.1V LiPo battery, the rifle delivers:

• Fast trigger response

• High rate of fire

• Smooth cycling

Lower voltage batteries will reduce rate of fire and responsiveness, which may be preferable for some players.

View fullsize

Pros

• Excellent price-to-performance ratio

• Lightweight but durable polymer build

• ESA quick spring change system

• MOSFET + programmable trigger (HAL ETU)

• Good internal components (V2 gearbox)

• High-cap magazine included (380 rounds)

• Fully adjustable stock and sights

• Strong customization options (AR platform compatibility)

Cons

• Polymer receiver may feel less “premium” to some users

• Battery space in buffer tube is limited (requires specific size battery)

• Does not come with battery or charger at the lower price

View fullsize

Overall Impression

The Specna Arms SA-F04 Flex AEG Airsoft Rifle is a well-rounded entry-to-mid-level AEG that doesn’t cut corners where it matters. You get modern electronics, solid internals, and strong usability at a price point that’s hard to beat.

It’s especially appealing for players who:

• Want AR-platform compatibility

• Prefer lighter rifles

• Need flexibility between indoor and outdoor play

• Value performance over full-metal aesthetics

View fullsize

Availability:

• Canada: ReplicaAirguns.ca

• USA: ReplicaAirguns.us

Final Thoughts

This is one of those rifles that hits a sweet spot between affordability, performance, and features. It may not have full-metal construction, but in real-world use, that’s not necessarily a downside, and in some cases, it’s actually an advantage.

Field testing will ultimately determine how it performs under real conditions, but based on this overview, it’s a solid option worth considering.

View fullsize

It’s that time again, another Mystery Box unboxing for the Replica Airguns channel. As usual, no idea what’s inside going in, but this one lines up right after SHOT Show season, which usually means some interesting gear starts showing up.

This isn’t a full review, just a first look at what came in. Detailed Table Top and Field Test videos will follow once everything gets properly looked at and tested.

What’s in the Box?

This month’s box included three very different airsoft products:

View fullsize

1. KJ Works KP-13 CO2 Airsoft Pistol

A Glock-style pistol - but not a Glock.

First Impressions:

• Very familiar Glock-like ergonomics and controls

• Polymer frame with a metal slide

• Trigger safety and integrated accessory rail

• Front fiber optic sight, black rear sight

• Full-size drop-out magazine (CO2 powered)

It also came with a barrel extension, but it arrived with damaged threads. Not a huge loss since those extensions tend to be fragile anyway and aren’t essential for most users.

Takeaway:
If you're looking for a Glock-style platform without licensing restrictions, this fits the role well. Likely compatible with some Glock holsters depending on fit.

View fullsize

2. Specna Arms SA-F249 Machine Gun (ParaFlex)

This was the standout item, and easily the most unexpected.

First Impressions:

• Large, heavy, and very aggressive-looking

• FN M249-style light machine gun “replica” (Non trademarked)

• Battery-powered box magazine with hopper feed system

• Integrated bipod and carry handle

• Multiple Picatinny rails

• Includes extra spring and accessories

The feeding system and internal layout aren’t immediately obvious, it’s one of those guns that clearly requires some setup and understanding before use.

Takeaway:
This is not a casual backyard plinker. It’s a full-on support weapon platform, something you’d expect in a tactical or milsim environment.

View fullsize

3. Specna Arms SA-F04 FLEX Electric Airsoft Rifle (Gen 2)

A much more approachable and practical option compared to the F249.

First Impressions:

• AR-style AEG platform

• Mostly polymer construction with some metal components

• Adjustable stock (buffer tube style)

• Picatinny rails and M-LOK compatibility

• Comes with both orange and black flash hiders

• Includes extra spring (M90) for velocity tuning

• Dean’s connector

Takeaway:
This looks like an entry-level to mid-tier rifle, compact, lightweight, and ideal for someone getting into Airsoft or wanting a versatile CQB setup.

Overall Thoughts

This box had a good mix:

• Pistol platform (KP-13) → familiar, practical

• Entry-level rifle (SA-F04) → accessible and versatile

• Heavy support weapon (SA-F249) → niche, but very cool

The F249 clearly stole the show just based on size and complexity, but the SA-F04 is probably the one most people would actually use regularly.

What’s Next?

As usual:

• Tabletop reviews will come first (closer look, specs, handling)

• Field test shooting videos are stacking up and coming next

Where to Find These

If you're in Canada, these should be available through:

• www.ReplicaAirguns.ca

Some models may also be available in the US store:

• www.ReplicaAirguns.us

More detailed breakdowns coming once these get properly tested.

View fullsize

In this review, we are looking at two crossbows that honestly shouldn’t really be compared, but that’s exactly why this comparison is interesting. On one end, we have the Steambow M10, a compact, magazine-fed, fast-shooting crossbow built for fun, training, and high repetition shooting. On the other, the CenterPoint AT400, a full-size, high-powered compound crossbow designed for serious hunting applications.

Aside from both launching bolts/arrows, these two platforms sit at completely opposite ends of the spectrum. The goal here is not to declare a winner, but to help you decide which one actually fits your use case, or if you might want both.

Key Differences Overview:

Steambow M10

The Steambow M10 is a compact repeating crossbow designed more for fun, training, and high-volume shooting. It uses a magazine-fed system that can hold 10 bolts, allowing for very fast follow-up shots. Depending on the limb setup, it can reach speeds of up to around 200 FPS and produce approximately 10 to 15 foot-pounds of energy. Its lighter draw weight options and easy cocking system make it beginner-friendly and much less physically demanding to use. Overall, the M10 is best suited for target shooting, casual use, and potentially small game with the right setup.

CenterPoint AT400

The CenterPoint AT400 is a full-size compound hunting crossbow built for serious power and hunting use. Unlike the M10, it is a single-shot platform that focuses on accuracy, penetration, and range rather than fast repeat shooting. It sends arrows downrange at about 400 FPS and delivers close to 150 foot-pounds of energy, putting it in an entirely different class. With its roughly 200-pound draw weight, it requires much more effort to cock and reload, usually with a rope or crank system. This makes it better suited for medium to large game hunting, where power and shot placement matter far more than speed.

Side-by-Side Summary

If you want something lightweight, compact, fast, and easy to shoot often, the Steambow M10 is the better fit. If your main goal is hunting and you need maximum power, longer range, and serious downrange performance, then the CenterPoint AT400 is clearly the more appropriate choice. Even though both are crossbows, they are built for very different types of users and very different shooting experiences.

Power & Performance

The biggest separation between these two comes down to raw power.

• The Steambow M10 delivers up to about 10–15 foot-pounds of energy, depending on limb configuration and bolt weight. It’s comparable to higher-end airguns or paintball-level power.

• The CenterPoint AT400, by contrast, produces close to 150 foot-pounds of energy and launches arrows at around 400 FPS.

That’s not a small difference, it’s an entirely different category.

Real-world comparison:

• M10 = backyard shooting, small game potential

• AT400 = deer, and potentially even elk with proper shot placement

This is essentially the difference between a BB gun vs a hunting rifle in terms of role and impact.

View fullsize

Shooting Experience:

Steambow M10

• Magazine-fed (10 bolts)

• Extremely fast follow-up shots

• Break-action style cocking (very quick)

• Great for drills, repetition, and skill building

• Minimal effort required

You can realistically fire 10 shots in about 10 seconds, making it a very engaging and fun platform.

CenterPoint AT400

• Single-shot system

• Requires rope cocking or crank system

• Significant physical effort (200 lb draw)

• Slow reload (often 30–60+ seconds)

This is a deliberate shooting experience, not something designed for volume or speed.

Use Case Breakdown:

Steambow M10 – Best For…

• Backyard shooting (with proper backstop)

• Target practice

• Tactical-style drills

• High repetition training

• Casual and frequent use

• Lower-cost shooting (especially with rubber ball version)

View fullsize

You can even use:

• Rubber balls (low cost, reusable)

• Lightweight bolts

• Indoor-friendly setups (with proper safety)

CenterPoint AT400 – Best For…

• Hunting (deer and potentially larger game)

• Long-range accuracy

• Maximum penetration and power

• Purpose-driven shooting

This is not a casual-use product, you typically bring it out when it matters.

Ease of Use & Physical Demand:

Steambow M10

• Very easy to cock (even at lower draw weights)

• Beginner-friendly

• Lightweight (~compact platform)

• Minimal fatigue

View fullsize

CenterPoint AT400

• High effort required

• Needs cocking tools (rope or crank)

• Physically demanding

• Slower workflow between shots

Key takeaway:
Anyone can pick up and use the M10 easily. The AT400 requires more commitment, strength, and practice.

Size & Portability

Steambow M10

• Compact and lightweight

• Can be partially disassembled easily

• Backpack-friendly

• Ideal for mobile use

CenterPoint AT40

• Large, fixed structure

• Not easily transportable without a case

• Designed for field carry, not casual portability

Ammo & Cost of Ownership:

View fullsize

Steambow M10

• Bolts are smaller and cheaper

• Rubber ball version = extremely low cost

• Less wear and tear overall

• High reusability

CenterPoint AT40

• Arrows are larger and more expensive

• More prone to damage/loss at high speeds

• Requires maintenance and replacement over time

Value Consideration:

Interestingly, both fall into a similar price range (~$400–$500), but value depends on usage frequency:

• M10 → Likely used often → Higher practical value

• AT400 → Used less frequently unless hunting regularly

If something sits unused, its value drops regardless of price.

View fullsize

Who Should Buy Each?

Choose the Steambow M10 if you…

• Want fun, fast shooting

• Plan to shoot frequently

• Prefer low effort and ease of use

• Don’t need high power

• Enjoy tactical or training-style shooting

Choose the CenterPoint AT400 if you…

• Are hunting (especially deer or larger game)

• Need high power and penetration

• Value accuracy and range

• Don’t mind slower reload times

• Are comfortable with physical effort

View fullsize

Final Thoughts

These two crossbows are not competitors—they are tools for completely different jobs.

• The Steambow M10 is about frequency, fun, and versatility

• The CenterPoint AT400 is about power, precision, and purpose

If anything, this comparison highlights that you may not need to choose one over the other, you might actually benefit from having both ends of the spectrum covered.

If neither fits perfectly, then the real answer may be to look for something in the middle.

Where to Buy

Both of these crossbows (or similar models) are typically available through:

• Buy Steambow M10 in Canada

• Buy CenterPoint AT400 In Canada

• Buy in the US

View fullsize

Specifications:

• Type: Compound Crossbow

• Manufacturer: CenterPoint

• Model: AT400 Composite Crossbow

• Velocity: Up to 400 FPS

• Energy: 142 ft-lbs

• Draw Weight: 200 lbs

• Weight: 7.5 lbs

• Cocked Width: 14.5 inches

• Construction: Composite Stock & Rail, Quad Limb (Compressed Fiberglass)

• Scope: 4x32 Fixed Crossbow Scope

• Cocking System: Detachable Silent Crank (with sled system)

• Included Accessories:

  • 3x 20” Carbon Arrows (0.003 tolerance)

  • Quiver

  • Cocking Rope

  • Crank System

  • Foregrip

  • Hardware & Tools

Introduction

The CenterPoint AT400 Composite Tactical Crossbow is not something I review very often. Most of what I normally cover is backyard or basement-friendly, BB guns, pellet guns, airsoft, that kind of thing.

This is completely different.

The CenterPoint AT400 is a serious piece of equipment. This is not for casual plinking. This is designed for hunting and real-world applications, and based on the specs alone, it’s capable of taking small to medium game, potentially even deer.

With 400 FPS and 142 ft-lbs of energy, this is in an entirely different class compared to the compact crossbows I usually review.

Initial Thoughts (Before Shooting)

At the time of this review, I have not shot it yet.

Reason being, this requires a proper archery-rated backstop. This is not something you casually shoot in your backyard without the right setup.

I do have the space, but I would need:

• A proper target

• A safe shooting environment

This is something I plan to revisit once I can set it up properly.

View fullsize

What’s in the Box

• 3x carbon arrows

• Detachable quiver (mounts underneath)

• Crank cocking system

• Manual cocking rope

• String wax

• Allen keys and hardware

• Spare mounting components

Assembly is required, but it’s fairly straightforward:

• Expect about 30–60 minutes

• Mostly attaching the limb and securing hardware

Cocking Methods

This crossbow has a 200 lb draw weight, so you are not pulling this back by hand.

Two Methods:

1. Manual Cocking Rope

• Hooks attach under the string

• Make sure to loop string on rear part of the crossbow

• Foot goes into the stirrup

• Pull using your lower body

• Requires strength, especially in the lower back

2. Crank System

• Mounts into rear slots

• Much easier and controlled

• Recommended if you have any physical limitations

View fullsize

Design & Build Quality

This is a compound-style crossbow, featuring:

• Quad limb system (2 per side)

• Pulley/cam setup for efficient energy transfer

• Composite stock and rail

• Compact profile (14.5” cocked width)

Key Features:

• Roller Arrow Retention Spring
  Keeps the arrow securely in place

• Picatinny Rail System
  For mounting optics (comes with 4x32 scope)

• Oversized Stirrup
  Makes cocking more stable

• Ergonomic Grip & Foregrip
  Comfortable handling

• Integrated Quiver
  Holds 3 arrows + 1 loaded

• Safety System
  Engages when cocked

View fullsize

Walk-around Highlights

• Polymer/composite one-piece frame

• Rubber butt plate

• Large trigger guard (good for gloves)

• Protective hand guard (keeps fingers safe from string)

• Transparent scope lens covers

• Compact and tactical design

This is clearly built for real-world use, not just recreational shooting.

Performance Expectations

Even without shooting it yet, the specs tell the story:

• 400 FPS is extremely fast

• 142 ft-lbs delivers serious impact

• Designed for:

  • Hunting

  • Outdoor shooting

  • Controlled environments

The CenterPoint AT400 Composite Tactical Crossbow is not comparable to pistol-style or compact crossbows.

View fullsize

Pros

• Very high power (400 FPS / 142 ft-lbs)

• Compact 14.5” cocked width

• Quad limb system for durability and efficiency

• Silent crank system (ideal for hunting scenarios)

• Solid composite construction

• Includes everything needed to get started

• Roller retention system improves arrow consistency

• Good ergonomics and handling

Cons

• 200 lb draw weight (requires effort or crank use)

• Heavier than smaller crossbows (7.5 lbs)

• Fixed stock (no adjustability)

• Requires proper shooting setup (not backyard-friendly)

• Arrows require maintenance and eventual replacement

• Price (~$749 CAD)

View fullsize

Final Thoughts

This is a serious hunting-grade crossbow.

It’s not a casual product, and it’s not meant for beginners without proper setup and understanding.

What you get is:

• High performance

• Solid build quality

• Practical hunting capability

If you’re looking for something compact but powerful enough for real-world use, the CenterPoint AT400 fits that role.

Where to buy

• ReplicaAirguns.ca (Canada)

View fullsize

Specifications:

• Manufacturer: E&L

• Model: AKS-74N (Essential & Platinum Versions)

• Caliber: 6mm Airsoft BB

• Power Source: AEG (Electric)

• Fire Modes: Semi-Auto / Full-Auto

• Velocity: 350–400 FPS (0.20g BBs)

• Magazine Capacity: ~120 rounds (Mid-cap included)

• Weight: 6.5 – 7.8 lbs

• Length: ~28.9" (folded) / 36" (extended)

• Barrel: ~6.03mm Tight Bore Inner Barrel

• Gearbox: Version 3 Full Metal Gearbox

• Hop-Up: Adjustable

• Construction: Full Steel Receiver + Real Wood Furniture

• Stock: Side Folding Metal Stock

• Rail: AK Side Mount for Optics

• Battery Compatibility: Deans (adapter included for Tamiya)

First Impressions

Today we are taking a look at the E&L AKS-74N, a full steel and real wood AEG airsoft rifle that leans heavily toward realism and collector appeal.

This is not your typical polymer field gun. Right away, the weight, materials, and finish give it a very authentic AK feel. It closely mimics the real steel AK platform, both visually and in handling.

There are two versions available:

• Essential (2.0 version): Focused on reliability

• Platinum version (reviewed): Upgraded MOSFET electronics and enhanced internals for better trigger response and durability

The Platinum version also comes with upgraded presentation-style packaging, making it feel more like a premium product out of the box.

View fullsize

In the Box

• AKS-74N AEG Rifle

• 120-round Mid-Cap Magazine

• Deans to Tamiya Adapter

• Certificate (velocity & joules info)

• Instruction Manual

• Decorative metal medallion

• Small utility bottle

Note: Battery and charger are NOT included.

Walkthrough & Features:

Build Quality

The E&L AKS-74N features a full stamped steel receiver paired with real wood furniture, giving it an extremely authentic look and feel.

• No cheap pot metal here, this is solid, high-quality steel construction

• Real wood furniture adds to the realism but requires more care

• Weight and balance closely resemble a real AK platform

View fullsize

Stock & Handling

• Side-folding steel stock

• Folds down to under 30 inches for compact transport

• Locks securely in both folded and extended positions

This makes it suitable for both transport and tighter CQB-style environments.

Controls & Operation

• Selector switch: Safe / Full Auto / Semi Auto

• Adjustable iron sights (elevation adjustable front & rear)

• Standard AK-style magazine release

• Side-mounted optics rail for AK-compatible scopes

Internal Setup

• Version 3 full metal gearbox (proven and widely supported)

• Adjustable hop-up (accessible via charging handle or dust cover)

• Tight bore barrel (6.03mm) for improved consistency

The Platinum version includes a MOSFET, improving trigger response and electrical efficiency.

View fullsize

Battery Setup

• Uses Deans connector (adapter included)

• Requires stick-style battery to fit inside the receiver tube

• Compatible with:

  • 7.4V (2S) for moderate performance

  • 11.1V (3S) for higher rate of fire

Testing showed a very high rate of fire with an 11.1V battery.

Performance Expectations (Pre-Test)

Since this is a tabletop review, performance testing will be covered in a future field test.

Expected performance:

• 350–400 FPS range (ideal for general field use)

• High rate of fire, especially with 11.1V battery

• Tight bore barrel and hop-up should provide consistent accuracy

View fullsize

Pros

• Full steel construction (very realistic weight & feel)

• Real wood furniture (authentic look)

• Version 3 gearbox (reliable platform)

• Semi & full-auto capability

• Adjustable hop-up

• Folding stock for compact transport

• AK side rail for optics

• Strong FPS range for field use

• Deans connector with adapter included

• Excellent balance of realism and usability

Cons

• Heavier than polymer AEG rifles

• Battery and charger not included

• Real wood requires care (scratches, moisture)

• Higher price point

Pricing (At Time of Recording)

• Essential Version: ~$517 CAD

• Platinum Version: ~$849 CAD

View fullsize

Final Thoughts

If your priority is realism, the E&L AKS-74N is one of the closest AEG representations of an AK platform you can get.

The combination of:

• Full steel construction

• Real wood furniture

• Solid internal components

makes this rifle stand out from typical airsoft options.

While it comes at a premium price and requires separate battery/charger purchase, it delivers a high-end experience that collectors and serious players will appreciate.

For those looking for the most realistic AK-style AEG, this is a strong contender.

Where to Buy

• Canada: www.replicaairguns.ca/aks-74n-steel-wood-aeg-airsoft-rifle

• US: www.replicaairguns.us/airsoft-rifles

View fullsize

In this table top review, we’re taking a look at the Umarex T4E TP50 Gen 2 CO2 Paintball Pistol, part of Umarex’s T4E (Training for Engagement) lineup. This version is marketed more as a tactical training pistol, while its nearly identical counterpart, the HDP50, is positioned toward home defense.

At first glance, the TP50 and HDP50 look almost identical. The main visual difference is that the TP50 comes in an all-black finish, while the HDP50 features an orange slide. Beyond that, the functionality, performance, and specs are essentially the same.

Key Features and Specifications

• Manufacturer: Umarex

• Model: T4E TP50 Gen 2

• Caliber: .50 caliber

• Power Source: 12g CO2 (quick piercing system)

• Action: Semi-auto, double action trigger

• Magazine Capacity: 6 rounds (internal inline magazine)

• Velocity: Rated up to 465 FPS

• Energy: Claimed 11 joules (can be higher depending on ammo)

• Barrel Length: ~4 inches

• Overall Length: ~8 inches

• Weight: ~1.5 lbs (0.7 kg)

• Construction: Polymer frame and slide with metal internals and barrel

• Safety: Integrated trigger safety

• Rail: Under-barrel Picatinny rail

• Sights: Fiber optic front and rear

View fullsize

Overview and First Impressions

The TP50 Gen 2 is a compact, .50 caliber paintball-style pistol designed for training, recreational shooting, and less-lethal applications. It has a solid feel in the hand, not too heavy, not too light, and resembles a full-size handgun profile, similar in size to a large-frame pistol.

Despite its polymer exterior, the internal components that matter, especially around the CO2 system—are metal, giving it durability where needed.

CO2 System (Quick Piercing Feature)

One of the standout features is the quick piercing CO2 system:

• Insert the CO2 cartridge (butt-first)

• Tighten the cap until snug

• When ready to use, give the bottom a firm “whack”

• A pin pops out on the back where you can see it to indicate the system is pressurized

This allows you to keep the pistol loaded but not activated, which is useful for storage or readiness situations.

View fullsize

Ammo Compatibility

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol supports a wide range of .50 caliber ammunition, including:

• Rubber balls

• Powder balls

• Paintballs

• Steel/rubber hybrid balls

• Pepper balls (limited availability in Canada)

Performance varies significantly depending on the weight of the projectile:

• Lighter rubber balls: ~450 FPS / ~13–15 joules

• Heavier projectiles: lower energy (down to ~7–11 joules)

View fullsize

What’s Included

• TP50 Gen 2 pistol

• Two tubes of 10 rounds each (powder + rubber balls)

• Barrel cleaning squeegee

• Instruction manual

• Cardboard packaging (blue “tactical pistol” branding)

View fullsize

Walkaround Highlights

• Fiber optic sights make target acquisition easy in various lighting conditions

• Textured grip and slide for solid handling

• Metal trigger with integrated safety

• Wide open barrel design

• Picatinny rail for adding lights or lasers

• Clear “Strike” marking for CO2 activation point

Overall, it’s a clean, functional design with a tactical look, especially in the all-black version.

View fullsize

Pros

• Compact size compared to other .50 cal pistols

• Wide variety of compatible ammo types

• Quick piercing CO2 system (very practical)

• Good power for its size (~11–15 joules range)

• Fiber optic sights improve usability

• Picatinny rail for accessories

• Realistic all-black tactical appearance

Cons

• Only 6-round capacity before reload

• Limited shots per CO2 (~3–4 reloads)

• Internal magazine (no quick mag swaps)

• Pepper ball ammo difficult to source in Canada

• Efficiency trades off for higher power

TP50 vs HDP50 (Quick Comparison)

• TP50: All black, marketed as tactical training

• HDP50: Orange slide, marketed for home defense

• Performance: Essentially identical

View fullsize

This difference is largely cosmetic and marketing-driven, so choosing between them comes down to preference and intended use.

Final Thoughts

The Umarex T4E TP50 Gen 2 CO2 Paintball Pistol is a solid, compact .50 caliber CO2 pistol that delivers respectable power in a manageable platform. It’s not designed for high-capacity shooting or efficiency, but rather for impact, simplicity, and versatility in ammo choice.

If you’re looking for a less-lethal option or a training pistol with realistic handling and solid performance, the TP50 fits that role well, especially if you prefer the more discreet all-black tactical look.

Where to Buy

• 🇨🇦 Buy the T4E TP50 in Canada: ReplicaAirguns.ca

• 🇨🇦 Buy the T4E HDP50 in Canada: ReplicaAirguns.ca

View fullsize

In this table top review, we’re taking a close look at the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This model fits into a long lineage of classic lever-action BB rifles, alongside well-known options like the Daisy Red Ryder and the Marlin variants from Crosman and Umarex. These rifles all share a similar concept, simple, spring-powered, lever-action BB guns designed for training, plinking, and beginner shooters, but each brings its own subtle differences in materials, styling, and features.

Key Specifications

• Model: Air Venturi Annie Oakley Lil’ Sure Shot

• Type: Lever Action Spring Piston BB Rifle

• Caliber: 4.5mm Steel BB

• Power Source: Spring (No CO2 Required)

• Velocity: Up to 350 FPS

• Magazine Capacity: 550 Round Internal Reservoir (Gravity Fed)

• Action: Lever Action

• Safety: Cross Bolt Safety

• Barrel: Smoothbore

• Stock: Stained Solid Wood

• Construction: Primarily Metal with Some Plastic Components

• Weight: Approx. 3.3 lbs

• Overall Length: ~36.25 inches

• Optics Rail: Removable Weaver/Picatinny Style Mount

First Impressions & Build Quality

The Annie Oakley Lil’ Sure Shot stands out with its classic Western styling, enhanced by engraved Annie Oakley branding on the wood stock. It’s a step above many entry-level BB rifles thanks to its real wood stock and metal lever, giving it a more authentic and durable feel compared to fully plastic alternatives.

Most of the rifle is metal and wood, though there are a few plastic components:

• Trigger

• Front sight (on the newer version)

• Adjustable portion of the rear sight

• Removable scope rail

Overall, it feels solid in the hands, lightweight, and well-balanced, especially for younger shooters or anyone new to lever-action rifles.

View fullsize

How It Works

This is a spring-piston, lever-action BB rifle, meaning:

• No CO2 or gas is required

• Each shot is powered by cocking the lever

• BBs are stored in a large internal reservoir

• You must tilt the rifle upward to gravity-feed BBs into position

With a 550-round capacity, you can shoot for quite a while before needing to reload, your arm will likely get tired before you run out of ammo.

Handling & Usability

This rifle is clearly designed with accessibility in mind:

• Lightweight (3.3 lbs) makes it easy to handle

• Shorter length and pull fits smaller shooters well

• Moderate cocking effort is manageable for beginners

• Lever action slows firing rate, adding a safety advantage for new users

Rifles like this are excellent for training because:

• They are easier to aim than pistols

• They encourage controlled shooting

• They are not overly powerful

Even for experienced shooters, these are simply fun and inexpensive for backyard plinking.

Sights & Optics

Out of the box, the Air Venturi Annie Oakley Lil’ Sure Shot Spring BB Rifle includes:

• Fixed front sight (plastic on newer version)

• Adjustable rear sight (elevation only)

One notable feature is the removable Weaver-style rail, allowing you to:

• Mount a red dot or scope

• Or remove it for a more traditional look

Keep in mind the rail is plastic, so care should be taken when mounting optics.

View fullsize

Comparison to Similar BB Rifles

This rifle sits in the same category as:

• Daisy Red Ryder – The original classic

• Umarex Marlin Lever Action – Slightly more adult-oriented design

• Crosman Marlin (older models) – Direct Red Ryder competitor

All of these:

• Use lever-action spring systems

• Have internal BB reservoirs

• Shoot in the ~300–350 FPS range

The Annie Oakley version distinguishes itself with:

• Better visual styling

• Wood and metal construction

• Optional optics mounting

New vs Older Annie Oakley Version (Key Differences)

If you come across different versions, here are the main distinctions:

Newer Version:

• Longer barrel

• Plastic front sight

• Larger loading port (easier to load)

• Metal Lever

• Brighter, more polished wood finish

View fullsize

Older Version:

• Shorter barrel

• Metal front loading system (rotating port)

• Metal front sight (more durable)

• Plastic Lever

• Slightly darker, more matte wood

Both should perform similarly, but the newer version is a bit more refined with that quality all metal lever.

Pros

• Lightweight and easy to handle

• Real wood stock and metal lever construction

• Large 550-round capacity

• No CO2 required (low maintenance and inexpensive to shoot)

• Removable optics rail for flexibility

• Classic Western styling with Annie Oakley branding

• Great for beginners and younger shooters

Cons

• Plastic front sight (new version)

• Lower power compared to CO2 rifles

• Rear sight only adjustable for elevation

• Slightly higher price than some entry-level similar BB rifles

• Less realistic than shell-ejecting lever-action models

Final Thoughts

The Air Venturi Annie Oakley Lil’ Sure Shot is a well-built, visually appealing lever-action BB rifle that blends classic styling with modern usability.

It’s ideal for:

• Beginners and younger shooters

• Backyard plinking

• Anyone wanting a simple, reliable and fun BB rifle

While it doesn’t aim for full realism like higher-end shell-ejecting models, it delivers where it matters, ease of use, affordability, durability, and fun factor.

Available at:

• 🇨🇦 ReplicaAirguns.ca

• 🇺🇸 ReplicaAirguns.us

Also check out ReplicaAirguns.com for additional articles, photos, and video reviews.

View fullsize

In this April 2026 unboxing, there’s a solid mix of power, realism, and variety straight out of the box. Even before opening it up, the size and weight of the package hinted that this wasn’t going to be a light or basic shipment. As usual, this is more of a first look and overview rather than a deep dive, with full tabletop and field test reviews coming later.

CenterPoint AT400 Compound Crossbow Kit (400 FPS)

The first item out of the box is easily the most substantial: an AT400 compound crossbow kit. This is not one of the smaller, backyard-friendly crossbows—it’s a full-sized, high-powered unit designed for serious use.

• Velocity: Rated around 400 feet per second

• Energy: Approximately 142 ft-lbs

• Features:

  • Detachable silent crank system for easier cocking

  • Picatinny rail for mounting optics or accessories

  • Full kit setup with multiple components included

This level of power puts it well into small-to-medium game hunting territory, making it more than just a recreational piece. Because of its size and power, testing it indoors isn’t really practical, so this one will likely get a detailed tabletop breakdown rather than a traditional shooting demo.

View fullsize

Umarex T4E TP50 Gen 2 (.50 Cal Tactical Pistol)

Next up is the Umarex T4E TP50 Gen 2, this time in the all-black tactical version rather than the more recognizable orange training model.

• Caliber: .50 caliber

• Velocity: Up to 465 FPS

• Ammo: Rubber balls (included in the box)

• System: CO2 powered with quick-pierce activation

This version stands out for a couple of reasons. First, the higher velocity suggests noticeably more energy compared to earlier or training-focused versions. Second, the all-black design gives it a much more realistic look, closer to a traditional firearm aesthetic.

Functionally, it uses a spring-fed internal magazine and a preloaded CO2 system, allowing you to keep it ready without gas leakage. When needed, a quick strike activates the CO2, making it immediately usable.

Based on typical .50 cal projectile weights and that velocity, this likely lands somewhere in the mid-to-high teens or possibly around 20 ft-lbs of energy, though exact numbers will be confirmed during testing.

View fullsize

E&L AKS-74N AEG Airsoft Rifle (Legends Series)

The final item in the box is a standout for realism: the E&L AKS-74N AEG airsoft rifle, branded under the “Legends / Legendary Perfection” line.

This is clearly built to replicate the real AK platform as closely as possible.

• Construction:

  • Real wood stock

  • Stamped steel receiver and metal components

  • Folding stock (magnetic lock)

• Operation:

  • AEG (Automatic Electric Gun)

  • Semi and full-auto firing modes

  • Adjustable rear sight (elevation)

• Extras:

  • Deans connector compatibility

  • Included specs sheet with velocity in m/s

The weight is immediately noticeable, estimated around 7–8 pounds, which adds to the realism. The combination of real wood furniture and steel construction gives it a very authentic feel compared to lighter, polymer-heavy Airsoft rifles.

The included magazine is polymer, but it should be compatible with standard AK-style AEG mags, meaning upgrades or swaps are likely straightforward.

Final Thoughts

This unboxing delivers a strong mix across three very different categories:

• High-power archery platform (AT400 crossbow)

• Compact CO2-powered .50 cal pistol (TP50 Gen 2)

• Full-metal, real wood AEG rifle (E&L AKS-74N)

Each item targets a different type of user, from tactical training and backyard use to collectors and realism-focused Airsoft enthusiasts.

As always, this is just the first look. Full tabletop reviews, comparisons, and field tests will break down real-world performance, usability, and value.

For availability and full write-ups, check:

• ReplicaAirguns.ca (Canada)

• ReplicaAirguns.us (USA)

• ReplicaAirguns.com (reviews and videos)

Replica Airguns takes a step back in time to share how everything began, long before the channel, website, and stores grew into what they are today. The journey started around 2006, just a year after YouTube first launched. At the time, online video was still in its infancy, with low-resolution clips, shaky footage, and minimal production quality being the norm.

Mike created the very first video simply for fun. It featured a modified Umarex Walther PPK BB gun that Mike had altered for full-auto shooting. Edited in iMovie on a Mac and uploaded in low resolution (under 640×480), the video wasn’t intended to be anything more than a casual experiment. However, after sitting online for a few months, it unexpectedly reached around 100,000 views, an impressive number for that era, when far fewer creators were uploading content and viral videos were rare.

That early success revealed something important: there was real interest in Airguns and BB gun content. From there, Mike purchased more Airguns (to his wife’s disapproval), more videos were created, and the foundation for a focused channel began to take shape. A few years later, the project became more serious, evolving into a dedicated platform and eventually transitioning into the Replica Airguns brand you see today!

Over time, the brand expanded into multiple websites, ReplicaAirguns.com, ReplicaAirguns.ca, and ReplicaAirguns.us, along with a large video library. Although the channel faced setbacks, including being removed from YouTube at one point, the content continued to live on through platforms like Vimeo and Rumble. Now, with nearly all videos being restored back to YouTube, the library is close to fully rebuilt.

The original video that started it all was thought to be lost for years, buried on old storage drives. Recently rediscovered, it has been enhanced using modern AI tools to improve clarity while still preserving its original look and feel. Despite its dated quality, it represents the true starting point of the Replica Airguns journey.

For viewers interested in Airguns, including BB guns, Airsoft, Pellet guns, and more, the channel and websites continue to offer extensive content and product availability across both Canadian and U.S. online stores.

View fullsize

Today’s unboxing, we’ll call it the March 2026 Unboxing Preview!

I had no idea what was in this box, and honestly, I like it that way. It makes every delivery feel a bit like Christmas. A box shows up from the warehouse, I crack it open, and my job is to let you know what’s inside and what might be coming soon to the store. A lot of the time these are products we’ve never carried before. Not always, but usually there’s at least something new or unexpected in the mix.

As usual, getting into the box was its own little challenge. Good thing I had my “box cutter “ handy. Once I finally got through the packaging, it was clear right away this one had some interesting stuff inside.

What was in the box?

View fullsize

1) Annie Oakley Lil’ Sure Shot BB Rifle

First out of the box was something a little different: the Annie Oakley Lil’ Sure Shot.

This one is brought to you by Air Venturi / Western Justice, and it’s essentially a Red Ryder-style lever action BB rifle with some nice Western-themed touches. Right away, it stood out with the stained solid wood stock, wood forearm with engraving, and engraved Annie Oakley artwork.

Here are some of the listed specs and features:

• Ammo: .177 caliber / 4.5mm steel BBs

• Action: Lever cocking, spring piston

• Barrel: Smoothbore

• Overall Length: 36.25 inches

• Capacity: 550 BBs

• Claimed Velocity: Up to 350 FPS

• Weight: 3.3 pounds

• Max Shooting Distance: 212 yards

Once I opened it up, it definitely gave me that familiar Red Ryder / Marlin Cowboy vibe, but it feels like it may be just a bit bigger overall. Maybe a slightly longer stock, maybe just a bit more substantial in the hands. I’ll have to compare it side-by-side with a Red Ryder later to know for sure.

A few things I noticed right away:

• It has a metal lever

• Metal frame

• Metal barrel

• A plastic muzzle tip

• A rear sight that appears adjustable

• And surprisingly, a Weaver-style rail on top for mounting an optic

That top rail is actually a nice touch. You could absolutely throw a small scope on this if you wanted to, and why not? It makes for a fun little plinker, and the engraving gives it some real visual appeal too.

I’ve always had a soft spot for these little lever-action BB rifles. They’re just fun. They’re simple, classic, and a great way to introduce younger shooters to safe rifle handling. Rifles like this tend to be a bit easier for beginners since they’re not as quick to wave around as a pistol.

So yes, this one looks like it should be a lot of fun, and I’ll be doing both a Tabletop Review and a Field Test Shooting Review on it soon.

View fullsize

2) .68 Caliber Nylon Balls (100 Count)

Also in the box was a pack of 100-count .68 caliber nylon balls.

These feel noticeably heavier than the rounds I was using in my earlier T4E TC68 review. The previous ones were around the 2.8 to almost 3 gram range, and these new ones feel more like they’re getting up into the high 3 gram to 4 gram area.

That added weight could make them especially interesting to test in the TC68, since more projectile mass can sometimes translate into more energy on target, even if velocity comes down a bit.

So these should be fun to test out, and as it turns out, they may have arrived for a very good reason…

3) Steambow B08 / .68 Caliber Rubber Ball Crossbow Platform

This was the big surprise in the box, and definitely the highlight item.

If you watched my SHOT Show coverage, then you may remember this one from the Steambow booth. It’s a really cool product: basically a magazine-fed rubber ball shooting crossbow-style launcher in .68 caliber.

I had already gotten a chance to try it at SHOT Show, and Steambow was great about letting us check it out there. So it was pretty exciting to see one show up here for review.

Some of the box highlights:

• Detachable magazine

• 8-shot capacity

• .68 caliber projectiles

• Includes 25 foam balls

• Comes with a 35-pound limb

• AR-style adjustable buttstock

• Protective shooting glasses included

This product has a lot going on in the box. Once I opened it up, there were multiple components and accessories packed inside, including:

• Main body / receiver section

• Foregrip

• AR-style buttstock

• Upper receiver section with included magazine

• 35-pound limb

• Bow string and related accessories

• Lubricant / wax for the string

• Mounting hardware and tools

• Protective glasses

• 25 included foam balls

There’s definitely going to be some assembly involved before I can do a full review, so that will be part of the tabletop video.

The main unit itself feels solid and substantial. It has some good weight to it, and overall it looks like a very cool design. The included 35-pound limb should offer a decent balance between usability and performance. At SHOT Show we were only using a lighter 25-pound setup, which was very easy to draw, great for casual target practice, but obviously not the high-performance option.

One of the things I like about this platform is that it gives you that crossbow-style shooting experience while using reusable .68 caliber balls. That can make it easier and cheaper to shoot compared to bolt-style systems, where each arrow or bolt can get expensive fast, especially if you miss the target and damage one.

And since I now also have those heavier nylon .68 caliber rounds from the same box, I should be able to test both the included foam balls and the heavier options to see how they compare.

This one should make for a very interesting review.

Final Thoughts

So that was the March 2026 mystery box. We’ve got two very different products here:

• The Annie Oakley Lil’ Sure Shot, which looks like a fun, classic lever-action BB rifle in the Red Ryder tradition

• And the Steambow B08 / .68 Caliber Rubber Ball Crossbow Platform, which is something a little more modern, tactical, and definitely unique

Both of these are getting the full treatment, so expect Tabletop Review and Field Test Shooting Review videos for both products.

The Annie Oakley should be a blast to shoot, especially if it performs anything like the other Red Ryder-style guns I’ve reviewed over the years. And the Steambow system looks like it could be a really practical and fun way to enjoy crossbow-style shooting without the cost and fragility of traditional bolts.

I’ve still got a few earlier products to finish up as well, but I’ll be getting to these as quickly as I can.

Thanks for watching another Replica Airguns video. Don’t forget to subscribe, and check the links in the description for products available in our Canada and US stores.

For Canada, visit ReplicaAirguns.ca
For the US, visit ReplicaAirguns.us

And if you’re looking for other products including Airguns, BB guns, pellet guns, airsoft guns, blank guns, and accessories, be sure to check out both stores as well.

View fullsize

In this Video I perform the field test shooting review for the SIG Sauer P229 pellet pistol. If you’re interested in the full specifications, features, and a closer look at the pistol itself, make sure to check out my tabletop review where I go over all the details on this gun.

For today’s test I’m going to be shooting SIG Sauer lead pellets, roughly 7–8 grains. Because these are standard lead pellets and not lightweight alloy pellets, they’re not going to produce the highest velocity numbers this pistol can achieve. With lighter alloy pellets you will definitely see faster readings.

You could also shoot steel BBs through this gun, but BBs sometimes don’t seal quite as tightly in the barrel as pellets do. When that happens, some of the CO₂ can slip around the BB as it travels down the barrel which can actually reduce velocity slightly. BBs also generally don’t carry energy to the target as well as pellets, so pellets are usually the better option for accuracy and performance.

With these pellets, I’m expecting roughly around the 300 FPS range, so let’s see how it actually performs.

View fullsize

Velocity Test

For the velocity portion I’m going to put five shots through the chronograph to see what kind of numbers we get.

Chronograph Results:

Shot Velocities: 320 FPS - 296 FPS - 303 FPS - 286 FPS - 277 FPS (Average of 296 FPS)

As you can see, the readings are right about where expected, generally around the 300 FPS mark, with a slight drop toward the last shot. That’s fairly typical for CO₂ powered blowback pistols, since some of the gas is being used to cycle the slide.

View fullsize

Accuracy Test:

For the accuracy portion I’ve set up my paper targets at 30 feet downrange.

The SIG Sauer P229 pellet pistol uses a dual rotary 8-round magazine, so instead of the usual 10 shots I normally use in these tests, I’m going to fire eight shots to keep things simple and consistent.

One thing I like about this pistol is the trigger operation. When you start the trigger pull, the first stage rotates the rotary magazine. This part of the pull is very light and smooth, so there’s very little double-action feel. Once that’s done, you reach the single-action hammer release, which is nice and predictable.

To keep the trigger as light as possible I’m going to pre-cock the hammer, which eliminates most of that initial rotation effort and gives you a much lighter break.

View fullsize

Accuracy Results:

After eight shots at 30 feet, the group measured approximately 1.5 inches.

That’s actually pretty good accuracy for a blowback pellet pistol.

The pistol was shooting slightly low out of the box, roughly about two inches low and just a little to the left at this distance. My aim point was just underneath the bullseye so I could see the target above the sights.

The sights on this pistol are fixed, so you can’t adjust them directly. The easiest solution is simply to aim slightly higher and a bit to the right if you want to hit the bullseye consistently at this range.

View fullsize

Sight Upgrade Options:

If you want more precise adjustment, you do have a couple of options:

• Install a slide-mounted red dot using the removable optics plate

• Add a laser to the accessory rail under the barrel

Either of those options would allow you to dial in your point of aim exactly where you want it, which is a nice upgrade path for this pistol.

View fullsize

Shooting Impression

The trigger feels really good, and the blowback action is solid and snappy, though not overly fast.

The slide actually has a bit of that heavier, slightly slower 1911-style blowback feel, which I personally like. Some blowback pistols cycle extremely quickly and can feel a bit artificial, but this one feels more substantial because of the heavier slide weight.

The pistol itself also has good weight and balance, coming in a bit over two pounds, giving it a very realistic feel in the hand.

Overall, it’s a solid, well-built pellet pistol, and like many of the SIG Sauer Airgun products, it feels like a lot of attention went into the design.

SIG doesn’t actually manufacture these Airguns themselves, they design them and partner with manufacturers to produce them, but the quality across their pellet pistols and rifles has generally been very good.

View fullsize

Final Thoughts

The SIG Sauer P229 CO₂ blowback pellet pistol delivers:

• Around 300 FPS velocity with lead pellets

• Realistic blowback action

• Good weight and handling

• Approximately 1.5 inch accuracy at 30 feet

• Multiple options for optic or laser upgrades

Overall, it’s a very enjoyable pistol to shoot and a solid option if you’re looking for a realistic blowback pellet pistol.

Don’t forget to subscribe, and check us out on Facebook, Twitter, and Instagram.

If you’re interested in buying Airguns, BB guns, Airsoft guns, Pellet guns, Blank guns, and Accessories, be sure to visit our online Canada and US Stores.

Available in our Canada Replica Airguns Store. Also check out:

• Buy the Sig Sauer P229 in Canada

• Buy the Sig Sauer P226 in the US

View fullsize

In this Field Test Shooting Review I’m taking a look at the Umarex T4E TC68 .68 caliber paintball / less-lethal marker to see how it performs in terms of velocity, accuracy, and overall shooting experience.

I have already done a Table Top Review covering the specifications, features, and overall purpose of the TC68, so make sure to check that video out if you want the full breakdown of the gun itself. This field test review is focused strictly on real-world performance.

For this test the TC68 has been de-restricted, meaning the adjustment screw has been modified slightly so it can reach its full potential. Even with this adjustment it should still remain legally compliant here in Canada, since the velocity will remain under the 500 fps threshold.

For ammunition I used .68 caliber nylon rounds:

• Black rounds: approximately 2.8 grams

• Yellow rounds: approximately 2.6 grams

The TC68 in this test is powered using dual 12-gram CO2 cartridges, rather than the larger 88-gram CO2 cylinder, which will affect both shot consistency and total shot count.

View fullsize

Velocity Testing

For the velocity portion of the test I fired several shots through my chronograph.

Chronograph readings were somewhat tricky to capture at first, but once everything started working correctly I was able to record several shots.

Example readings included:

• 476 fps

• 463 fps

• 453 fps

• 445 fps

The velocity dropped slightly during the test, which is expected when using dual 12-gram CO2 cartridges, as they cool down fairly quickly during rapid shooting.

The slightly heavier 2.8-gram black rounds were also used for some of the shots, which can contribute to minor changes in velocity compared to the lighter 2.6-gram rounds.

Even with that drop, performance was still strong and suggests the TC68 could likely reach high-400 fps velocities with a fresh CO2 setup or an 88-gram CO2 cylinder, which provides much greater gas capacity and improved consistency.

View fullsize

Accuracy Testing

For the accuracy portion of the test I set up a paper target down range and loaded roughly 20 rounds into the magazine.

The first test consisted of 10 shots in semi-automatic mode using the heavier black nylon rounds. A red-dot optic was installed on the TC68 for aiming, though it had not been sighted in or adjusted beforehand.

Results were quite respectable for a marker shooting heavy .68 caliber rounds.

• Overall grouping was approximately 4 inches

• Most shots landed within a 2.5–3 inch cluster

• One shot landed slightly low outside the main group

Considering the optic was not adjusted and this was essentially a right-out-of-the-box test, the accuracy was quite good.

Full-Auto Shooting Test

After the semi-auto accuracy test I attempted a full-auto burst test, but quickly discovered the CO2 had been depleted.

After installing fresh CO2 cartridges, the full-auto test was repeated with approximately 20 rounds loaded.

The TC68 does not have an extremely fast rate of fire, but it still delivers a solid stream of rounds when the trigger is held down.

View fullsize

During full-auto fire:

• The gun remained fairly controllable

• Rate of fire was moderate but effective

• CO2 cooling became noticeable during sustained bursts

A fresh target confirmed that the TC68 was still accurate enough for defensive-style shooting, keeping the majority of rounds within the main target area even during burst fire.

Power and Energy

Using approximately 2.8-gram nylon rounds traveling around 475 fps, the TC68 is producing significantly more energy than its factory-rated 16-joule output. Closer to 30 joules!

The modification performed simply allows the power adjustment screw to reach its full depth, allowing the marker to operate closer to its maximum potential.

While exact energy figures will depend on projectile weight and velocity, the TC68 in this configuration appears capable of producing considerably higher energy levels than stock, while still remaining under the 500 fps legal limit in Canada.

Shooting Impressions

Overall the Umarex T4E TC68 proved to be a solid and reliable platform during testing.

Some observations from the field test:

What I liked

• Strong velocity potential

• Good accuracy for a .68 caliber marker

• Full-auto capability for rapid follow-up shots

• Compatible with multiple CO2 power options

Things to consider

• Dual 12-gram CO2 cartridges cool down quickly

• Larger 88-gram CO2 cylinders will provide better consistency

• The gun includes multiple safety mechanisms that require familiarity

The TC68 includes three levels of safety, which helps prevent accidental discharge but does require some practice to become comfortable with the controls.

View fullsize

Final Thoughts

The Umarex T4E TC68 performed well in this field test.

Velocity was strong, accuracy was respectable for a .68 caliber marker, and the full-auto capability adds an interesting dimension to the platform.

With proper setup and a fresh CO2 source, the TC68 has the potential to deliver high-energy shots while still remaining within Canadian legal limits.

Overall it’s a very capable paintball / less-lethal marker and definitely an interesting option for those looking for a high-power .68 caliber platform.

• Buy the Umarex T4E TC 68 Less Lethal Paintball Rifle in Canada

• Buy Paintball Guns in the US