View fullsize

We are back on the indoor range for another dedicated shooting assessment, shifting gears to focus entirely on precision marksmanship with the Daisy 499B Match Grade Champion BB Rifle. If you missed the initial tabletop walkthrough detailing the rifle’s overall construction, materials, and competition specifications, be sure to take a look at that video. For this session, the table is cleared away and the focus turns squarely to downrange performance, tracking velocity consistency over the chronograph and a dedicated 5 shot 30 foot paper target test to evaluate its legendary accuracy claims.

Chronograph & Velocity Baseline

The 499B Champion is built around a single-shot, spring-piston cocked via an underlever, fed individually at the muzzle for match-regulated target programs. Single-loading from the muzzle often raises questions about loose shot movement, but an internal retention fixture keeps steel BBs securely seated even when tipping the muzzle down.

To establish our velocity baseline, the rifle was run with premium competition-grade 4.5mm steel BBs across a standard testing string. Because competitive match shooting prioritizes tight elevation clusters over high power, steady velocity numbers are critical.

Here is how the shot string registered over the sensor:

• Shot 1: 233 FPS

• Shot 2: 232 FPS

• Shot 3: 231 FPS

• Shot 4: 232 FPS

The rifle turned in an overall average of 232 FPS, demonstrating a remarkably narrow extreme spread of just 2 FPS from fastest to slowest shot. That sort of uniformity is outstanding for a spring-piston mechanism and ensures that vertical drop remains virtually identical from round to round.

Target Accuracy & Grouping Results

Moving to the paper target, the Daisy 499B Match Grade Champion BB Rifle was aimed using its factory competition aperture setup, pairing a hooded front aperture with a rear diopter peep sight. Without dialing in any mechanical sight adjustments from the factory setting, five carefully aimed shots were placed on fresh target paper.

• 5-Shot Target Card: Cycling the lever felt crisp and light, requiring very little physical effort to set the spring. Each BB was dropped down the bore and seated cleanly. The initial shot struck slightly above center, with subsequent rounds packing tightly into the primary bullseye zone. Three BB’s formed a nearly overlapping cluster well inside a quarter-inch, while the remaining two expanded the entire 5-round group to roughly half an inch across.

For a smoothbore steel BB platform, that is exceptional downrange precision. It easily matches or outperforms typical consumer-grade pellet rifles at equivalent indoor distances and confirms its reputation as an absolute tack-driver on the line.

View fullsize

Shooting Impressions & Operational Notes

Running the 499B through a match-style sequence highlights a few distinct mechanical characteristics:

• Muzzle Loading & BB Seating: Lacking an internal gravity magazine or high-capacity reservoir, every round is dropped directly down the bore. The magnetic catch grabs the BB approximately 10 to 12 inches down the tube, preventing roll-outs when angling the rifle downward during rest.

• Shooting Rhythm: The combination of manual lever cocking and individual muzzle feeding creates an intentional, deliberate pace. This platform is built for breathing control and fundamentals rather than high-speed action drills.

• Aperture Sight Picture: The dual-peep sighting system takes a short adjustment period if you are accustomed to notched post sights, but it naturally centers the eye and offers a remarkably repeatable sight plane.

• Long-Term Durability: While carrying a higher retail tier than recreational plinkers, the solid construction and refined mechanics make this a genuine legacy airgun meant to stay in the family for decades.

Final Thoughts

The Daisy 499B Match Grade Champion BB Rifle performed exactly as advertised throughout the session. Delivering near-zero velocity variance at 232 FPS paired with an out-of-the-box half-inch five-shot spread, it stands out as one of the finest pure-accuracy BB rifles available. For shooters seeking formal marksmanship training, youth competition prep, or simply extreme precision from a lever gun, it remains a benchmark option.

Where to Buy

• Buy the Daisy 499B Match Grade Champion BB Rifle in Canada

• Buy the Daisy 499B Match Grade Champion BB Rifle in the US

Be sure to follow and subscribe across our social channels and video platforms including Rumble, Vimeo, YouTube, Facebook, X, and Instagram. Thanks for tuning in, and see you on the next review!

View fullsize

Welcome to another Replica Airguns table top review, though for most long guns like this, we are doing it in front of the camera rather than strictly on the table to get the whole rifle in view. Today we are taking a close look at the Daisy 499B Match Grade Champion Lever Action BB Rifle. I brought out my Daisy Woodlands for a quick comparison, and while they share that classic lever-action DNA, the 499B is in a completely different league. This isn't your standard backyard plinker; it is a significantly upgraded, match-grade rifle engineered specifically for youth competition, such as 4-H and junior BB shooting programs.

View fullsize

Design and Build Quality The 499B is a substantial step up from entry-level BB guns. It features a beautiful Monte Carlo stock with a hardwood forearm, paired with a metal receiver, metal barrel, and metal lever. You will find a bit of plastic on the trigger and parts of the rear sight, but overall, the construction is incredibly solid. Coming in at 3.1 pounds (1.41 kg) and 36.25 inches (91 cm) in total length, it feels weightier and more solid than a standard Red Ryder, making it an excellent fit for adults as well as youth competitors.

One very cool competition feature of the Daisy 499B Match Grade Champion Lever Action BB Rifle is the internal weight compartments hidden inside the stock. By popping out a pin, you can access these compartments to add or remove weight, allowing you to fine-tune the balance of the rifle to your specific shooting stance. Out of the box, some minor assembly is required, such as attaching the stock with the provided hardware and installing the included shooting sling.

View fullsize

Performance and Operation This rifle is all about precision over power. It is spring-powered and shoots .177 caliber 4.5mm steel BBs at a very modest 240 FPS, generating under 1 Joule of muzzle energy. The low velocity is highly intentional, designed specifically for 5-meter indoor target shooting where accuracy is the only thing that matters. To get the most out of the precision smooth bore steel barrel, you absolutely need to use precision ground, match-grade steel BBs. Using cheap, oversized, or imperfect BBs could damage the specialized barrel.

The single-action trigger is light and predictable, but the real standout is the cocking effort. Racking the lever is incredibly smooth and completely lacks the loud, ratcheting sound you typically hear on standard spring-piston BB rifles. A manual cross-bolt safety is conveniently located on the side of the receiver.

View fullsize

The Muzzle-Loading Quirk The most unique aspect of the 499B is its loading mechanism. Unlike standard lever-action BB guns that hold hundreds of rounds in a gravity hopper, the Daisy 499B Match Grade Champion Lever Action BB Rifle is a true single-shot rifle with no hopper at all. You have to manually drop a single BB directly down the front of the muzzle for every single shot. This does raise a slight concern: if you are shooting from an elevated position pointing downward, there is a chance the BB could simply roll right out of the barrel. Because of this, it is strictly designed for level or slightly elevated target shooting.

Sights For aiming, Daisy equips the 499B with a high-quality, fully adjustable rear peep sight that dials in both windage and elevation. Up front, you get a hooded sight that takes interchangeable aperture inserts. While I managed to misplace my inserts in the packaging during the unboxing, they are included and allow you to customize your sight picture based on the target.

View fullsize

Key Specifications:

• Model: Daisy 499B Match Grade Champion.

• Type: BB Rifle.

• Caliber: .177 caliber 4.5mm steel BBs (Precision match-grade steel BBs required).

• Power Source: Spring-powered.

• Velocity: 240 FPS (Max 280 FPS).

• Action: Single-Action Lever Action.

• Barrel: Precision smooth bore steel barrel matched to ground shot.

• Weight: 3.1 lbs (1.41 kg).

• Overall Length: 36.25 inches (91 cm).

• Sights: Hooded front sight with interchangeable aperture inserts; fully adjustable rear peep sight.

View fullsize

Pros:

• Widely recognized as the most accurate 5-meter competition BB gun available on the market.

• Premium build quality featuring a beautiful Monte Carlo wood stock, hardwood forearm, and extensive metal components.

• Incredibly smooth and quiet lever-action cocking effort with no ratcheting.

• High-quality, fully adjustable rear peep sight and interchangeable front inserts provide a true competition sight picture.

• Includes a heavy-duty shooting sling and features internal stock compartments for custom weight balancing.

Cons:

• The single-shot muzzle-loading design is slow to reload and limits shooting to level or elevated angles to prevent BBs from rolling out.

• Low 240 FPS velocity means it is strictly an indoor or close-range target shooter, lacking the power for outdoor plinking or pest control.

• Features a plastic trigger and some plastic components on the rear sight.

View fullsize

The Takeaway If you are looking for the absolute pinnacle of BB gun accuracy for youth competition or dedicated 5-meter target practice, the Daisy 499B Match Grade Champion Lever Action BB Rifle is in a class of its own. It delivers an authentic, high-quality wood and metal feel alongside specialized precision features that standard entry-level rifles simply cannot match. Stay tuned for the Field Test Shooting video coming up shortly to see exactly what kind of groupings this match-grade barrel can produce.

• Buy the Daisy 499B Match Grade Champion Lever Action BB Rifle in Canada

• Buy the Daisy 499B Match Grade Champion Lever Action BB Rifle in the US

View fullsize

Getting a mystery box from the Canadian Replica Airguns warehouse feels a lot like Christmas and we are getting closer to Christmas... Today's unboxing was a tall package, and while it contained some excellent accessories, including Gear Stock 6mm airsoft BBs, a UV-activated Airsoft tracer unit, and a LiPo safety bag—the real highlights were two very distinct lever-action rifles.

Barra 1866 Tactical Lever Action CO2 .22 Caliber Pellet Rifle

The first rifle out of the box is the Barra 1866 Tactical CO2 Edition. It takes the classic 1866 lever-action platform and gives it a highly modular, modernized upgrade.

Initial Thoughts & Basic Specs:

• Ammunition & Power: This model is a .22 caliber pellet rifle that runs on a dual CO2 system housed in the back.

• Realistic Operation: It features a fully functional shell-ejecting system and includes ten metallic shells.

• Smooth Action: Operating the lever action on this rifle feels incredibly smooth.

• Tactical Upgrades: The tactical design includes top and bottom Picatinny rails and an octagonal barrel.

• Sighting: The rifle comes with a front sight and a versatile rear sight that functions as a notch or flips up into a peep sight.

View fullsize

Daisy 499B Match Grade Champion Lever Action BB Rifle

The second rifle is the Daisy 499B Match Grade Champion, famously billed as the world's most accurate BB gun. It feels essentially like a highly enhanced Daisy Red Ryder on steroids.

Initial Thoughts & Basic Specs:

• Premium Build: This is a full-sized rifle featuring a beautiful, fully wooden stock and forend. It is noticeably longer and more robust than a standard Red Ryder.

• Action: The metal lever produces a heavy, satisfying clunk when cocked during a dry fire.

• Competition Sights: Built for precision, it utilizes a front peep sight and a very small rear peep sight.

• Extras: A heavy-duty shooting sling is included in the box.

• Target Audience: While it is a fantastic platform for younger shooters, its larger size and premium quality make it highly suitable for older youths and adults.

I am incredibly excited to put both of these lever actions to the test. I will be producing full tabletop and field test shooting videos for both rifles very soon, so stay tuned.

View fullsize

While waiting for new guns to arrive for field and tabletop testing, it is the perfect time for an educational breakdown of blowback versus non-blowback Replica Airguns. When choosing between these styles, the core decision comes down to a trade-off: do you want the ultimate realism, or do you want maximum power and gas efficiency?

View fullsize

Full Blowback: The Ultimate Training Tool

Full blowback airguns are designed for the shooter who wants a true trainer with the most realistic functionality and breakdown.

• The slide cycles completely back with every single shot to provide simulated recoil.

• These models generally feature a true single-action trigger, which gives the shooter a lighter and shorter trigger pull.

• When the magazine is out of ammunition and the follower reaches the top, the slide will lock back just like a real firearm.

• They typically use full-size drop-out metal magazines that hold both the BBs or Airsoft BB’s and the CO2 cartridge.

• The main downside is that they require a massive amount of CO2 to simultaneously propel the ammunition and aggressively cycle the slide.

• This high gas usage causes the gun to cool down much quicker, which noticeably lowers the velocity of your shots.

• If the gun gets too cold during rapid fire, the CO2 valve can become sluggish and even lock open.

View fullsize

Non-Blowback: Power and Efficiency

Non-blowback airguns are built for the shooter who wants the most power and the highest number of shots to break targets downrange.

• The slide remains completely fixed in place and does not cycle when the gun is fired.

• Because there is no slide to cock the internal hammer, they rely on a true double-action trigger, resulting in a heavier and longer pull.

• While some models have full-size drop-out magazines, it is very common for non-blowback guns to use thinner stick magazines.

• They are significantly more efficient because all the CO2 is dedicated solely to firing the ammunition out of the barrel.

• The lack of blowback action means the gun does not cool down nearly as fast.

• They deliver higher overall shot velocities and can operate much more reliably in slightly colder temperatures.

View fullsize

Partial Blowback: The Middle Ground

For those who cannot decide between the two extremes, partial blowback models offer a compromise between realism and efficiency.

• The slide still cycles to provide simulated recoil, but it only travels part of the way back.

• The trigger feel sits somewhere between a true double-action and a single-action pull.

• They consume less gas than a full blowback model, but they still use more than a non-blowback model.

• They usually come equipped with full-size drop-out metal magazines.

• Many newer partial blowbacks feature a system where pulling the trigger pushes the BB directly into the barrel to create a tight seal, resulting in excellent CO2 efficiency and higher velocities than a full blowback Airgun.

Whether you are looking for Airguns, Airsoft rifles, Pellet guns, Blank guns, or Accessories, Canadians can shop at replicaairguns.ca and US customers can shop at replicaairguns.us. You can also explore thousands of past video reviews and connect on Facebook, Twitter, Instagram, Rumble, YouTube, and Vimeo.

View fullsize

Welcome back to Replica Airguns. I get asked all the time about which airguns hit the hardest, but a lot of people focus on the wrong attributes. They often look strictly at velocity instead of the raw energy and blunt force required for different tasks.

In this guide, we are breaking down the four main types of airgun ammunition: Airsoft, steel BBs, lead pellets, and rubber balls. The goal is to show you exactly what each ammo type excels at and where they fall short so you can choose the right tool for your specific needs.

View fullsize

6mm Airsoft: Safe Training and Plinking

Airsoft guns fire 6mm round balls, which are generally made of plastic, though you can find copper or zinc-coated variants. Because these are some of the lightest projectiles, ranging from 0.20 to 0.45 grams, they have the lowest overall energy and often lower velocities.

• Best For: Airsoft is ideal for force-on-force skirmishes (with proper eye protection) because the lightweight rounds sting but do not penetrate the skin.

• Practical Uses: They are great for safe indoor garage shooting without the risk of breaking windows, or for humanely chasing nuisance crows or vermin out of your yard without causing them permanent harm.

• Platform Tech: Heavier airsoft rounds utilize backspin, or "hop-up", to float straight through the air for better accuracy, and they are typically fired from highly realistic, full-blowback gas or CO2 replica pistols. Most rifle Airsoft guns are AEG’s using a battery and spring setup which allows for easy semi and full auto operation.

• Worst For: These are entirely ineffective for pest control (extermination) or any scenario requiring deep penetration or high impact energy.

View fullsize

4.5mm Steel BBs: Fast-Action Shooting

Steel BBs are 4.5mm in diameter, which translates to a .177 caliber round ball. Weighing in at approximately 5.3 grains, they are much denser than Airsoft rounds.

• Best For: Steel BBs are fantastic for fast-action plinking, breaking glass bottles, and tearing up pop cans.

• Platform Features: These are often used in 1-to-1 replica blowback pistols with drop-out full size magazines, giving shooters an authentic firearm feel for tactical manipulation practice.

• The Dangers: Steel does not deform upon impact, meaning these BBs are highly prone to dangerous ricochets if you shoot at hard surfaces indoors or up close.

• Worst For: Steel BBs lack the blunt force for home defense and are unethical for pest control as trey are a bit under powered and generally not as accurate as similar pellet guns.

View fullsize

Lead Pellets (.177 and .22 Caliber): Precision and Pests

Unlike round BBs, pellets are designed to be fired through a rifled barrel. Common sizes include .177 caliber (4.5mm, weighing 5 to 10 grains) and the much heavier .22 caliber (5.5mm, weighing 12 to 16 grains).

• Best For: The soft lead engages the spiral grooves in a rifled barrel, providing unmatched precision and accuracy.

• Terminal Ballistics: Because lead is soft, it expands and flattens upon impact, transferring its heavy kinetic energy directly into the target.

• Practical Uses: This improved energy transfer makes pellets the ethical choice for small pest control.

• Worst For: Pellet platforms are rarely designed as rapid-fire action shooters; they typically utilize slower single-shot (bolt actions) or rotary magazines that can require a bit of trigger finger strength to shoot quickly.

View fullsize

Rubber Balls (.43, .50, and .68 Caliber): Less-Lethal Blunt Force

This category represents the heavy hitters, firing massive projectiles that range from soft sponge rubber to dense steel-core balls, dust balls, and pepper balls.

• The Power Factor: A .68 caliber home defense marker can produce upwards of 20-50 Joules (or roughly 15-35 foot-pounds) of energy with dedicated home defense styled Rubber Ball Guns.

• Best For: The .68 caliber and high-powered .50 caliber options are explicitly designed for less-lethal home defense.

• How They Work: Instead of penetrating, these massive projectiles dump incredible raw energy and blunt force directly onto the target, effectively stopping threats through extreme pain.

• Training Options: The smaller .43 caliber variants are frequently chambered in realistic blowback replica pistols, making them excellent for tactical and paintball-style force-on-force training.

At the end of the day, picking the right Airgun comes down to matching the ammunition mass and energy to your target. You can find all the gear discussed here, from Airsoft replicas to less-lethal launchers, at the Replica Airguns Canada and US stores. Make sure you are subscribed to our channels across Rumble, YouTube, Vimeo, Instagram, X and Facebook for more detailed reviews and field tests.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

We are halfway through September, and another unannounced delivery just showed up at the door. This box was surprisingly compact but incredibly dense, hinting at a hefty amount of possible ammunition inside. Cracking it open revealed a massive 4,000-count bottle of BBs and an updated classic from Crosman.

Gear Stock 4.5mm Copper-Coated Steel BBs

The sheer weight of this package came from a bulk 4,000-round bottle of Gear Stock 4.5mm steel BBs. These specific rounds feature a copper coating, which looks great but comes with a few historical caveats.

• Copper vs. Zinc: In my experience, copper-coated BBs can tarnish over time. Unlike zinc, which stays relatively clean, older copper coatings can oxidize and leave a dark, powdery residue on your hands and inside your airgun's barrel.

• Quality Check: If you burn through your ammo quickly, the tarnishing won't be an issue. We will have to see if modern manufacturing has improved the coating durability on this Gear Stock batch, but I typically lean toward zinc-coated BBs for long-term storage and cleaner shooting.

• Buy Gera Stock BB’s in Canada

• Buy Gear Stock BB’s in the US

View fullsize

The Crosman 2240 XL .22 Caliber CO2 Pellet Pistol

The main event in this box is the Crosman 2240 XL. The 2240 platform has been a staple in the airgun community for decades, and the XL version finally addresses the most common pain points shooters had with the base model out of the box.

• Core Specs: The 2240 XL is a CO2-powered, bolt-action, single-shot pistol chambered in .22 caliber. It weighs in at 1.8 pounds, features a rifled steel barrel, and utilizes a standard 12-gram CO2 cartridge.

• The Metal Breech Upgrade: The standard 2240 and its multi-pump cousin, the 1322, utilize a plastic breech. Mounting an optic on those older models requires clamp-on barrel adapter rings, which can easily twist out of alignment. The 2240 XL ships with an upgraded all-metal breech featuring a milled 11mm dovetail rail, allowing for a rock-solid red dot or scope mount straight from the factory.

• Threaded Muzzle: The front of the barrel has a threaded muzzle cap. You can unscrew the tip to attach 1/2" UNF aftermarket compensators or moderators, adding another layer of customization.

• Buy the Crosman 22040 XL .22 Caliber CO2 Pellet Pistol in Canada

• Buy Pellet Pistols in the US

View fullsize

Customization and Practical Application

Because the 2240 XL features a dovetail rail instead of iron sights, it is built specifically for optics. This plays perfectly into the massive aftermarket support for Crosman’s 22xx and 13xx platforms.

I own a heavily modified "backpacker" setup on one of my personal Crosman .22s, featuring a skeletonized rear shoulder stock and a magnified scope. At sub-500 FPS, a .22 caliber pellet is highly effective for close-range pest control. When dealing with nuisance animals like crows attacking songbirds, an ultra-high-velocity pellet will often pass straight through the target, wasting its kinetic energy. A heavier .22 pellet moving at moderate speeds dumps its full energy upon impact, providing a much more immediate and humane dispatch.

The full tabletop and field test shooting videos for the Crosman 2240 XL are coming up next. Make sure you are subscribed on Rumble, Vimeo, X, Threads, or TikTok to catch the full performance breakdown when it goes live.

View fullsize

Welcome back for another indoor field test shooting review! Today I am testing out the Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle. I have already completed the dedicated Table Top Review where I covered specifications, build details, features, and an up-close look at the gun, so definitely check that out if you want the full hardware overview. For this video and field test, however, our focus is strictly on performance: putting it through the chronograph to find out its real-world velocity, running a 10-shot semi-auto accuracy test on paper, and finishing off with a full-auto mag dump downrange.

Chronograph & Velocity Performance

For our velocity baseline, I tested the Specna Arms SA-E10 PDW using 0.25g Airsoft BBs. While you can achieve higher numbers using lighter 0.20g BBs, 0.25g BBs generally provide a better balance of velocity, stability, and downrange consistency, making them ideal for both chronograph testing and target grouping.

Here is how the 5-shot string performed through the chronograph:

• Shot 1: 341 FPS

• Shot 2: 331 FPS

• Shot 3: 333 FPS

• Shot 4: 335 FPS

• Shot 5: 330 FPS

The rifle settled comfortably in the 330 to 341 FPS range (averaging 334 FPS). For an ultra-compact PDW running 0.25g BBs, that is right where you want it to be for close-quarters engagement and indoor skirmishing.

Downrange Accuracy & Target Testing

Moving over to the accuracy test, I placed a fresh paper target downrange. During the initial sight-in shots of the Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle, the rifle was hitting slightly low, so I adjusted my hold to aim at the top outer ring of the target to bring the grouping closer to the center bullseye.

• Semi-Auto Target Test (10 Rounds): Firing 10 carefully paced rounds in semi-auto yielded an impressive grouping right around 1.25 inches (just slightly over an inch). Once compensating with the top-ring hold, the rounds grouped tightly together.

• Full-Auto Mag Dump: Switching the selector switch over to full-auto, I dumped the remainder of the magazine downrange. The spread naturally opened up a bit under rapid fire to roughly 3 inches, which is completely expected in full-auto and it tore up the paper until the target backing actually gave way and fell off the backstop!

View fullsize

Handling Notes & Optics Fitment

A couple of notable observations from running this compact setup:

• Battery & Buffer Tube Setup: For this test, I had a larger battery that wouldn't slip cleanly into the compact buffer tube compartment, so I removed the buffer tube to fit the pack. While a bit improvised, having the rear stock available with the rail setup allowed for a stable cheek rest and solid shooting consistency.

• Stock Length & Sight Picture: Because this is an ultra-compact PDW, the overall length of pull is quite short. The rear flip-up peep sight sits very close to your eye, which can make the rear aperture appear large and blurry when focusing forward.

• Optics Recommendation: While the included flip-up iron sights are fully adjustable and get the job done, this platform would truly shine with a compact red dot sight mounted slightly further forward along the top Picatinny rail. You could easily keep the flip-up sights as backup iron sights if your red dot battery gave out.

• Magazines: The rifle conveniently ships with two magazines (roughly 120 rounds each), giving you 240 rounds right out of the box ready to hit the field.

Final Thoughts

The Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle is a fantastic, compact AEG rifle. It delivers great looks, solid build feel, consistent velocity suited for CQB, and tight 1.25-inch semi-auto groupings right out of the box. Aside from the shorter shoulder pull typical of PDW platforms, it performed reliably from start to finish.

Where to Buy

• Buy in the Canada Replica Airguns Store

• Buy AEG Airsoft Rifles in the US Replica Airguns Store

If you haven’t already, make sure to check us out and subscribe across our video and social channels including Rumble, YouTube, Vimeo, Facebook, X, and Instagram. We truly appreciate your support!

View fullsize

Today, we are putting the Marksman 1018 Spring-powered BB/Pellet Pistol through its paces in the indoor shooting range. Don't get too excited, this gun isn't going to blow your socks off with crazy power, and I highly doubt we'll be seeing sniper-level accuracy. I also only test it out using standard 4.5mm steel BB’s in this Field Test.

If you're looking for the nitty-gritty details, specifications, and close-up angles, I have already done the dedicated Table Top Video Review for this gun, so be sure to check that out. For this session, we are strictly focused on performance: getting it on the Chrony and seeing how this spring-powered plinker handles when we actually put some 4.5mm BB rounds downrange.

Chronograph and Velocity Testing Starting things off with the chrony test, I wanted to see what kind of speed we could get out of this basic springer. Marksman claims it can shoot up to 200 FPS on the packaging. To test this, I loaded up the built-in BB reservoir to see if it could hit those numbers. Let's see how it performed:

• Shot 1: 111 FPS

• Shot 2: 110 FPS

• Shot 3: 107 FPS

• Shot 4: 115 FPS

• Shot 5: 108 FPS

• Shot 6: 108 FPS

• Average 110 FPS

As you can see, the numbers were very consistent, hovering right around the 110 FPS mark. While it is incredibly consistent, it falls well short of the 200 FPS claim. Because of this exceptionally low velocity, I decided to scrap my usual 30-foot target test. The gun just doesn't have the power to push BBs effectively at that distance without a massive arc, so I moved closer to the paper target at around 20 feet.

View fullsize

Accuracy Downrange at 20 Feet Next up, from 20 feet out, I took aim to see what kind of grouping the Marksman 1018 could pull off on a fresh paper target.

Shooting the Marksman 1018 Spring-powered BB/Pellet Pistol requires a bit of an adjustment. Out of the box, the fixed sights were shooting rather high and significantly to the left. I was aiming dead center at the bullseye, and the rounds were lofting up and striking far left of the center ring. Because you are dealing with completely fixed sights on a low-velocity plinker, you're going to have to rely heavily on "Kentucky windage", meaning if you want to hit your target, you'll need to aim well to the right and a bit lower to compensate. At 30 feet, those BBs would just be arcing even more dramatically, so 20 feet (or even 10 feet) is definitely the sweet spot for this pistol.

Shooting Feel and Features Despite the low velocity and accuracy quirks, the physical shooting experience has some redeeming qualities. The loading mechanism works flawlessly; it draws from the internal reservoir consistently without missing a single beat while cocking as long as it is fairly full.

Cocking the spring is incredibly easy, and the trigger actually isn't half bad for such a basic, entry-level gun. Since it's spring-powered, there is no need for CO2. This means it will work in absolutely any environment, rain or shine, and it’s incredibly cheap to shot.

View fullsize

Final Thoughts Ultimately, the Marksman 1018 Spring-powered BB/Pellet Pistol is exactly what it looks like: a real basic, inexpensive plinker. It’s not meant for long-range accuracy or high power. It's designed for casually plinking pop cans in your backyard or basement at 10 to 20 feet. For just a few bucks, you can grab a bottle of BBs and have some cheap, casual fun without ever worrying about buying or running out of CO2 cartridges. It is inexpensive to buy, inexpensive to shoot, and incredibly easy to operate.

Where to Buy

• Buy the Marksman 1018 Spring BB - Pellet Pistol in Canada

• Buy Airguns in the US

Thanks for tuning in! Make sure to head over and follow the Replica Airguns channels on Rumble, Vimeo, and YouTube. We are uploading as much content as possible to Rumble right now, and your support means the world as we keep building up our video community! Until next time, take care.

View fullsize

Hey everyone, Michael here with another field test video! Today, we are putting the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol through its paces in the indoor shooting range. If you're looking for the nitty-gritty details, specifications, and close-up angles, be sure to check out my dedicated Table Top video. For this session, we are strictly focused on performance: seeing how this realistic blowback replica handles when we actually put some rounds downrange. While this specific model does include the MOS plates for mounting a red dot, I decided to stick with the standard white-dot open iron sights for today's target testing.

Chronograph and Velocity Testing

Starting things off with the chrony test, I popped in a brand new CO2 cartridge to see what kind of speed we could get out of this Glock. Generally, with a heavy, fast-cycling blowback system like this one, I expect velocities to hover right around the 300 FPS mark. Let's see how the Gen 5 performed:

• Shot 1: 296 FPS

• Shot 2: 260 FPS

• Shot 3: 256 FPS

• Shot 4: 285 FPS

• Shot 5: 257 FPS

• Shot 6: 283 FPS

As you can see, the numbers jumped around a fair bit, and we stayed just shy of that 300 FPS threshold. This isn't super surprising, when you have a really stiff, snappy slide spring eating up that CO2 to cycle the blowback action, you're usually trading off a little bit of velocity and consistency to get that realistic recoil feel.

View fullsize

Accuracy Downrange at 30 Feet

Next up, I stepped back to my standard 30-foot mark to see what kind of grouping the Glock 17 could pull off on a fresh paper target. I did actually loaded 10 BBs for this string, which means the slide did lock back on the final shot since the magazine wasn't fully topped up to capacity.

Shooting the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol is an absolute blast. The trigger is fantastic, it has a failry light, short pull that perfectly replicates that classic Glock single-action feel. By holding my aim dead center, or maybe just a hair under the bullseye, the end result was a just over 2 inch grouping fairly well centered left to right, but a bit low on the bullseye. It's definitely more than accurate enough for practical, fast-paced action shooting.

Shooting Feel and MOS Features

The physical shooting experience is really where this Umarex replica shines. The slide action is incredibly crisp and fast, giving you a surprisingly snappy kick that feels highly authentic in the hand.

One huge bonus for this Gen 5 model is the Modular Optic System (MOS) design. Even though I rolled with the iron sights today, you have all the included plates needed to drop a micro red dot on top if that's your preference. Combining that optics readiness with a trigger that lets you rip off quick follow-up shots without pulling your muzzle off-target makes this an absolute joy to shoot.

View fullsize

Final Thoughts

Ultimately, the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol is a top-tier training option. If you own the real steel 9mm version, this 1:1 BB replica is a no-brainer for running speed reloads, practicing your draw, and doing target transitions in the comfort of your own garage or backyard. You're saving a ton of money on ammo while getting some highly effective muscle memory practice. It might not win any awards for sheer FPS or sniper-level target accuracy, but as a realistic action plinker and trainer, it absolutely hits the mark.

Where to Buy

• Buy the Umarex Glock 17 Gen 5 CO2 Full Blowback BB Pistol in Canada

• Buy Glock Air Pistols in the US

Thanks for tuning in! Make sure to head over and follow the Replica Airguns channels on Rumble and Vimeo. We are uploading as much content as possible to Rumble right now, and your support means the world as we keep building up our video community!

View fullsize

Welcome back for another field test! Today I am taking the Daisy Woodland Trail Western Carbine 1999 out to the range to see what it can do. If you want a deep dive into the specifications, materials, and a close-up look at the hardware, make sure to watch our dedicated Table Top Review. For this video, however, I am focusing entirely on how this lever-action BB rifle performs when putting steel to paper.

Velocity and Chronograph Performance

To get a baseline for power and consistency, I ran a string of shots through the chronograph. The manufacturer claims velocities in the 300+ FPS range. Here is how the Daisy handled right out of the box:

• Shot 1: 291 FPS

• Shot 2: 286 FPS

• Shot 3: 285 FPS

• Shot 4: 284 FPS

• Shot 5: 283 FPS

The consistency on this carbine is outstanding. After a slightly higher first shot, it locked right into the high 280s and low 290s and stayed remarkably steady throughout the test string with an average fps of 286.

One quirk to watch out for during operation is the loading system. While cocking the lever, you might occasionally get a "dud" or mis-feed where a BB fails to chamber properly. If this happens, you simply need to (while pointing the barrel up) give the Daisy Woodland Trail Western Carbine 1999 a quick shake to position the ammo and rack the lever again.

View fullsize

Downrange Accuracy at 30 Feet

Moving on to the accuracy portion of the review, I set up a fresh paper target exactly 30 feet downrange.

• Target Testing: I fired 10 carefully aimed shots. The gun delivered an excellent grouping of about 1.5 inches. The cluster was perfectly centered left-to-right, meaning the windage was completely dialed in straight out of the box which is great since there are no windage adjustments to speak of. It did shoot slightly high on the elevation, but compensating for this is simply a matter of aiming just underneath the bullseye or tweaking your optics if you mounted a red dot or optical sight.

View fullsize

Handling Notes and Optics Fitment

This is an incredibly fun lever-action plinker. One of the best design choices on this specific Daisy Woodland Trail Western Carbine 1999 model is the modernized, bigger loop on the lever, which makes it much more comfortable for shooters with larger hands to cycle the action or if wearing gloves.

You will also find a major upgrade on the top of the receiver. This version features a Picatinny rail, making it extremely easy to mount optics. I actually used the built in open sights rather than installing a red dot sight during this specific accuracy test, and the iron open sights worked very well for me. If you prefer iron sights, the rear sight remains fully adjustable for elevation but not windage.

Final Thoughts

The Daisy Woodland Trail Western Carbine 1999 is a rugged, highly affordable BB gun that backs up its classic lever-action fun with rock-solid consistency and great accuracy on the range. It is incredibly cheap to shoot, making it the perfect backyard plinker for knocking over pop cans or army men. Just remember to always wear your eye protection!

Where to Buy

• Buy the Daisy Woodland Trail Western Carbine 1999 in Canada

• Buy BB Rifles in the US

If you haven't already, please head over to our YouTube, Rumble, and Vimeo channels and hit that subscribe button. We are always working to build our video community back up, and we truly appreciate your support!

View fullsize

In this table top review, we’re taking a detailed look at the Specna Arms RRA SA-E10 PDW EDGE AEG Airsoft Rifle. This is not a shooting test, the field test shooting video will be coming up later, but this overview will cover all the specifications, build quality, close-up details, and pros and cons so you can see if this compact PDW platform is the right fit for your load-out.

View fullsize

Key Specifications

• Manufacturer: Specna Arms

• Model: RRA SA-E10 PDW EDGE

• Platform: AR-15 / M16 Style (PDW Configuration)

• Caliber: 6mm Airsoft BB

• Action: Semi & Full Auto Selectable

• Trigger: Single Action Only (Electronic Switch Trigger)

• MOSFET / ETU: Factory Pre-installed GATE X-ASR 4th Gen MOSFET

• Magazine Capacity: Includes 2x Mid-Cap S-MAGs (125 rounds each)

• Velocity: ~375–390 FPS (Factory spring installed) / ~310–320 FPS (with included M90 spring)

• Weight: 5.1 lbs (2330 g)

• Total Length: 505 mm – 595 mm (Telescopic 4-position PDW stock)

• Inner Barrel: 160 mm (6.3 inches) / 6.03 mm Tight Bore Precision Barrel (Non-rifled)

• Muzzle Threading: 14mm CCW (with unique mock suppressor / flash hider)

• Gearbox: Reinforced ORION Version 2 Gearbox (Steel gears & 8mm ball bearings)

• Hop-Up: Rotary Style Adjustable Chamber

• Spring System: ESA™ Quick Spring Exchange System

• Construction: Full Metal Aluminum Alloy Receiver (Nano Coating) with Polymer Furniture

View fullsize

Build Quality & Design

The Specna Arms SA-E10 PDW EDGE features an exceptional full metal build with an aluminum alloy upper and lower receiver finished in a scratch-resistant Nano Coating. It is officially licensed by Rock River Arms and showcases crisp, deep laser-engraved trademarks across the receiver.

The rifle incorporates high-strength polymer furniture where appropriate (such as the pistol grip and sights) while keeping all major structural components, including the receiver, telescopic stock guide rods, partial buffer tube, and outer barrel assembly all solid metal.

View fullsize

Key Design Elements:

• Rock River Arms Licensing: Authentic deep-engraved receiver markings and unique serial number.

• PDW Stock: Telescoping 4-position wire stock with integrated buffer tube battery compartment.

• Front Quad Rail: Short 22mm RIS Picatinny handguard providing mounting space on top, bottom, and sides.

• QD Pistol Grip: Tool-free quick-access base plate for fast motor inspection and maintenance.

• Mock Suppressor / Muzzle Device: Aggressive front muzzle device mounted via standard 14mm CCW threading.

• Rotary Hop-Up: Accessible behind the dust cover by pulling back the metal charging handle.

View fullsize

Features Overview

• GATE X-ASR 4th Gen MOSFET: Protects internal trigger contacts, optimizes battery efficiency, speeds up trigger cycle response, and features built-in onboard diagnostics.

• ORION V2 Gearbox: Features a reinforced gearbox shell, steel gears, 8mm ball bearings, and polymer piston with full steel teeth for outstanding out-of-the-box durability.

• ESA™ Quick Spring Change System: Allows players to swap out the main spring in minutes without having to remove or open the gearbox.

• Mid-Cap S-MAGs: Ships standard with two 125-round mid-cap magazines, eliminating winding wheels and BB rattle during movement.

View fullsize

Included in the Box

• Specna Arms SA-E10 PDW EDGE AEG Airsoft Rifle

• 2x 125-round Mid-Cap S-MAG Magazines

• Additional M90 Low-Velocity Spring

• GATE X-ASR Diagnostic Card

• Detachable Vertical RIS Foregrip

• Deans-to-Tamiya Adapter

• Cleaning / Jamming Rod

• User Manual & Certificate Card

View fullsize

Pros:

• Outstanding build quality with full metal aluminum receiver and scratch-resistant Nano Coating.

• Officially licensed Rock River Arms deep-engraved markings.

• Pre-installed factory GATE X-ASR 4th Gen MOSFET for fast trigger response and battery protection.

• Upgraded reinforced ORION V2 Gearbox with steel gears and 8mm ball bearings.

• ESA™ quick spring change system makes swapping springs for indoor vs. outdoor play effortless.

• Includes two 125-round mid-cap S-MAGs and an extra M90 spring right out of the box.

• Tool-free QD pistol grip provides instant access to the motor.

• Extremely compact, maneuverable PDW layout with 22mm RIS rail mounting options.

• No orange tip on Canada Store versions.

Cons:

• PDW buffer tube battery compartment is very tight (requires a compact stick LiPo setup, approx. 12 x 17 x 75 mm max).

• Charging handle must be manually held back to access the rotary hop-up adjustment.

• Flip-up sights and fire selector switch are primarily polymer construction.

• Fire selector is right-hand oriented (non-ambidextrous).

View fullsize

Overall Impression & Availability

The Specna Arms RRA SA-E10 PDW EDGE is an outstanding, ultra-compact AEG that combines premium full-metal exterior construction with top-tier internal components. Between the factory GATE MOSFET, ORION reinforced gearbox, dual mid-cap magazines, and included M90 spring, it delivers high-end out-of-the-box CQB performance without requiring immediate aftermarket upgrades.

• Buy in the Canada Replica Airguns Store

• Buy AEG Airsoft Rifles in the US Replica Airguns Store

Stay tuned for our upcoming Field Test Shooting Review where we put the SA-E10 through chronograph and target accuracy testing!

View fullsize

In this table top review, we are taking a close look at the Daisy Model 1999 Lever Action Spring BB Rifle. While this is technically a “table top” review, lever-action rifles like this are always a bit easier to show off in-hand due to their length and proportions.

This rifle fits into the long, classic lineage of lever-action BB guns, modeled after traditional Western lever-action carbines like the legendary Daisy Red Ryder. While it shares that iconic spring-piston platform, the Daisy Model 1999 brings a modern aesthetic update with all-weather synthetic furniture, high-visibility fiber optics, and a built-in optics rail.

Key Specifications

• Model: Daisy Model 1999

• Type: Lever Action Spring-Piston BB Rifle

• Caliber: 4.5mm (.177 cal) Steel BBs

• Power Source: Spring-Piston (No CO2 Required)

• Velocity: Approx. 350 FPS

• Magazine Capacity: 650-Round Internal Reservoir (Gravity Fed)

• Action: Single-Shot Lever Action

• Safety: Cross-Bolt Safety

• Barrel: Smoothbore Steel Barrel (inside outer metal barrel shroud)

• Stock & Forearm: All-Weather Molded Synthetic / Composite Polymer (Green)

• Construction: Metal Outer Barrel & Receiver with Polymer Stock, Forearm, & Lever

• Weight: Approx. 2.2 lbs

• Overall Length: 35.4 inches

• Sights: High-visibility fiber optic front sight; elevation-adjustable rear sight

• Optics Rail: Built-in Picatinny rail mount

View fullsize

First Impressions & Build Quality

The Daisy Woodland Trail Model 1999 puts a contemporary spin on the traditional lever-action look, sporting an all-weather green molded synthetic stock and forearm paired with an orange trigger and barrel band accent.

Weighing in at just 2.2 pounds with an overall length of 35.4 inches, it is exceptionally lightweight and compact, making it an ideal entry-level platform for younger shooters and beginners.

The rifle incorporates a solid amount of metal along the outer barrel and receiver casing. While it does use polymer for the stock, forearm, and cocking lever, the build feels sturdy and low-maintenance.

View fullsize

How It Works

The Woodland Trail Model 1999 utilizes the proven spring-piston lever-action mechanism:

• No CO2 or Gas Required: Every shot is cocked and powered manually via the spring-piston system.

• Large Loop Lever: Cocking is smooth and easy thanks to the oversized loop lever.

• Massive Ammo Capacity: It holds up to 650 steel BBs in a top-loading internal reservoir.

• Gravity Fed: Tilting the rifle cocks and drops a BB into the loading mechanism, visible through a small viewport near the breach so you can confirm a round is chambered before firing.

Sights & Optics

Unlike traditional bare-iron lever guns, the Daisy Model 1999 comes equipped with several optical upgrades:

• Fiber Optic Front Sight: The bright front fiber optic sight makes target acquisition quick and clear against varying backgrounds.

• Adjustable Rear Sight: Step-adjustable for elevation (fixed for windage).

• Built-in Picatinny Rail: A dedicated top rail allows for easy mounting of compact red dot sights or low-power optics without needing custom brackets or adapters.

Pros & Cons

Pros:

• Extremely lightweight (2.2 lbs) and compact—perfect for youth and beginners.

• Durable, all-weather synthetic stock is moisture-resistant and low maintenance.

• Built-in Picatinny rail makes adding red dots or scopes simple.

• Bright fiber optic front sight aids quick target acquisition.

• Smooth, easy-cocking lever action with a large loop handle.

• Huge 650-round gravity-fed BB reservoir means less reloading downtime.

• 350 FPS velocity is safe and well-suited for supervised backyard plinking.

• No CO2 or gas cartridges required.

• Highly affordable entry-level price point.

Cons:

• Synthetic plastic cocking lever (a metal lever would feel more robust).

• Lower velocity compared to modern CO2-powered airguns.

• Rear sight adjusts for elevation only (no windage adjustment).

• BB ammo only and smoothbore barrel limits pinpoint precision to short plinking ranges.

• Basic spring action lacks the ultra-realistic shell-ejecting mechanics of higher-end replicas.

View fullsize

Final Thoughts

The Daisy Woodland Trail Model 1999 is a reliable, fun, and accessible take on the classic lever-action spring BB rifle. By blending traditional lever-action shooting with modern polymer furniture, a fiber optic front sight, and a Picatinny optics rail, it offers fantastic value for casual plinking and teaching basic marksmanship while offering some customization.

Stay tuned for our upcoming Field Test Shooting Review, where we’ll put this rifle through its paces on the chronograph and see what kind of target accuracy it delivers!

Available at:

• 🇨🇦 Buy the Daisy Woodland Trail Model 1999 in the Canada Store

• 🇺🇸 Buy BB Rifles in the US Replica Airguns Store

Also check out ReplicaAirguns.com for more written articles, detailed photos, and reviews.

View fullsize

First Look & Overview In this table top review, we are taking a look at the Umarex Glock 17 Gen 5 MOS Full Blowback CO2 4.5mm BB Pistol. We will be focusing purely on the table-top aspects for this video, so there is no active shooting featured here; a dedicated field test shooting video will be coming down the road. As a fully licensed replica from Umarex, it offers all the authentic Gen 5 styling and markings you would expect. Today, we are specifically looking at the full blowback version, which prioritizes a true-to-life shooting experience and heavy recoil simulation over pure power and efficiency.

Specifications

• Caliber: 4.5mm steel BBs

• Action: Single action, full blowback

• Magazine: 17-round drop-out magazine

• Power Source: 12-gram CO2

• FPS: Maximum 300 FPS

• Weight: 1.5 lbs (680 grams)

• Length: 7.95 inches (20.2 cm)

• Barrel: 4-inch (10 cm) smooth bore

View fullsize

Build Quality & Design The Umarex Glock 17 Gen 5 MOS features an incredibly realistic design, boasting a heavy metal slide paired with a durable polymer frame. It completely matches the heft of its real steel counterpart, weighing in at a solid 1.5 pounds, and feels very comfortable in the hand. The slide comes with the signature Gen 5 front serrations and cycle.s completely back during operation, opening the ejection port fully to reveal the wide open magwell

Magazine & Loading System Loading the Umarex Glock 17 Gen 5 MOS BB Pistol is straightforward. It utilizes a heavy, full-size drop-out magazine that holds 17 rounds of 4.5mm steel BBs. The magazine follower can be pulled down and easily locked in place with a quick flick, making loading incredibly fast. Unlike partial blowback models where the magazine pulls forward to seal the breech, this model utilizes a traditional Airsoft-style follower-fed system where the slide simply strips the BB and loads it directly into the breech. While this design is less CO2 efficient and results in slightly less power, it is essential for delivering that complete, highly realistic full blowback action.

Handling & Controls True to the Glock platform, the handling on this replica is extremely authentic. It incorporates an ambidextrous slide catch release that smoothly locks the heavy slide rearward when the magazine runs empty. The single-action trigger pull is relatively light and short. In terms of safeties, it has the classic built-in trigger safety, but Umarex has also integrated an additional cross-bolt safety directly onto the trigger. While it functions well, it can be slightly awkward to push flush and disengage with your finger when you are preparing to shoot.

View fullsize

Sights & Optics This specific MOS (Modular Optic System) version truly shines when it comes to aiming options. Out of the box, it comes equipped with the standard fixed white-dot front and rear sights for easy target acquisition. However, the package also includes an Allen key and four different adapter plates, allowing you to seamlessly mount a variety of micro red dot sights directly to the slide. If you want to add more accessories, the built-in lower rail easily accommodates tactical lights or lasers.

Performance Expectations The Umarex Glock 17 Gen 5 MOS Full Blowback CO2 4.5mm BB Pistol operates with a heavy focus on realism. Because the heavy metal slide travels all the way back with every shot, you get a very satisfying simulated recoil. However, this heavy action demands a significant amount of CO2. As a result, you can expect a slightly lower velocity, coming in at around 300 FPS, and fewer overall shots per CO2 cartridge compared to partial blowback models.

View fullsize

Pros

• Realistic Replica in looks, weight, and full blowback function.

• Good weight and feel to it, build quality seems excellent as with all the Umarex Licensed Glocks.

• Really nice looking and full featured replica of the original Glock 17 Gen 5 MOS.

• Fully Glock licensed via Umarex.

• Easy to see white dot sights front and back.

• Recessed barrel for added realism.

• Accessory rail under barrel for adding a laser or tactical light.

• Full slide travel blowback action provides a true, hard-recoil shooting experience.

• Can be field stripped just like the real steel version.

• Cross Bolt Safety built into the trigger.

• Full size drop out metal magazine that holds the CO2 and 4.5mm steel BBs.

• Slide spring is super snappy and firm, giving an exceptionally crisp and authentic recoil effect.

• Warning instructions are nice and discreet under trigger guard.

• Lighter, true single-action trigger pull as the full blowback slide cocks the internal striker on every cycle.

Cons

• Full blowback action decreases CO2 efficiency, resulting in fewer shots per cartridge.

• Slightly lower velocity (300 FPS) due to the heavy slide action.

• No adjustable sights out of the box without mounting a red dot.

View fullsize

Final Thoughts The Umarex Glock 17 Gen 5 MOS is a fantastic option for anyone who values maximum realism and training utility over raw FPS. While you do trade some CO2 efficiency for the heavy slide travel, the simulated recoil and authentic handling make it an incredibly enjoyable Airgun to shoot. The inclusion of the MOS plates is a massive bonus for modern shooters wanting to run optics. Stay tuned for the upcoming shooting video to see exactly how this performs down range.

• Buy the Umarex Glock 17 Gen 5 MOS CO2 Full Blowback 4.5mm BB Pistol in Canada

• Buy Glock Airguns in the US

View fullsize

First Look & Overview In this table top review, we are taking a look at the Marksman Spring BB / Pellet / Dart Pistol, an inexpensive and versatile option for backyard and basement plinking. This model is primarily constructed with a plastic exterior shell, housing a single-stroke spring-piston power plant. Coming in at around $50 CAD, this is not a high-end replica, but it offers a highly accessible shooting experience with the ability to handle multiple types of ammunition.

View fullsize

Specifications

• Caliber: 4.5mm Steel BBs, .177 Caliber Pellets, & Darts

• Action: Single-stroke spring piston, break-barrel style loading

• Magazine: 18-round BB reservoir (single-shot for pellets and darts)

• Power Source: Spring piston

• FPS: Maximum 200 FPS

• Weight: ~1 lb (454 grams)

• Overall Length: 9 inches

• Construction: Mostly plastic exterior with internal metal components

• Sights: Fixed fiber optic sights (front and rear)

• Safety: Cross-bolt safety

View fullsize

Build Quality & Design The Marksman Spring BB / Pellet / Dart Pistol features a lightweight, predominantly plastic external construction. While it lacks the substantial heft of full-metal replicas, weighing in at just 1 pound, it feels quite comfortable in the hand. The grip has a nice texture and isn't overly thick, making it suitable for shooters with smaller hands even though the pistol maintains a slightly bulky, blocky 1911-style appearance. Despite the external plastic shell, the internal spring piston system and critical mechanical components are made of metal.

View fullsize

Magazine & Loading System Loading this pistol is a unique process. It features a built-in 18-shot internal reservoir for 4.5mm steel BBs. To fire, the rear section of the slide is pulled back to activate the spring piston. Pushing the top portion forward opens the breech in a break-barrel fashion, allowing access to the loading bay. When using BBs, they drop in from the internal reservoir. If you are shooting pellets or darts, you will load them one at a time directly into the breech. An included rubber speed-loader accessory lets you easily drop BBs into the reservoir by simply pinching it, a convenient feature that saves loading time.

Handling & Controls Operating this spring piston pistol requires manual cocking before every shot. The slide is used to cock the internal spring, and the trigger features a skeletonized design within a built-in fairly heavy trigger guard. The trigger pull is decent but requires a deliberate press. The cross-bolt safety effectively locks the trigger, ensuring that the pistol cannot be fired once cocked and loaded until you have disengaged it. (Mine did have an issue)

View fullsize

Sights & Optics The Marksman Spring BB / Pellet / Dart Pistol comes equipped with fixed fiber optic sights on both the front and the rear. This makes target acquisition noticeably easier, especially against various backgrounds or in lower light conditions. The sights are fixed and non-adjustable, and the pistol even though it looks like it does, it does not include accessory rails for mounting aftermarket optics or lasers.

Performance Expectations This airgun is not built for shattering power records, boasting a maximum velocity of around 200 FPS. Because of its low power output, it is very quiet to operate, making it ideal for close-range indoor plinking or backyard target shooting where noise is a concern. The spring piston action means there is no CO2 to buy, keeping your operating costs extremely low.

Pros

• Very affordable (around $50 CAD)

• No CO2 required; low ongoing operating cost

• Versatile ammo compatibility (shoots BBs, pellets, and darts)

• 18-round internal BB reservoir

• Included quick-load pinch accessory for BBs

• Fiber optic sights front and rear

• Lightweight and easy to handle for various hand sizes

• Quiet operation ideal for indoor or backyard shooting

Cons

• Low velocity (max 200 FPS)

• Predominantly plastic exterior construction

• Requires manual cocking for every single shot

• Fixed, non-adjustable sights

• No accessory rails

View fullsize

Final Thoughts The Marksman Spring BB / Pellet / Dart Pistol isn't about raw power or ultra-realistic blowback action. It's an accessible, budget-friendly airgun that doesn't require extra CO2 purchases. With the ability to shoot multiple types of ammo and a convenient included BB loader, it delivers straightforward, simple fun. Stay tuned for the upcoming field test shooting video to see exactly how this performs down range.

Be sure to check out our exclusive long-form video content on YouTube, Vimeo and Rumble and connect with us on Facebook, Twitter and Instagram.

• Buy the Marksman 1018 Spring BB - Pellet Pistol in Canada

• Buy Airguns in the US

We’ve got yet another box on the table today for our August Mystery Unboxing. It took a while to arrive, but it was absolutely worth the wait. We’re diving into four highly anticipated products across the BB, Pellet, and Airsoft categories.

Here is a quick first look at what’s hitting the review table soon!

View fullsize

Marksman Model 1018 .177 Caliber Air Pistol

First out of the box is the Marksman 1018. This is a very budget-friendly (around $50), 1911-inspired spring-actuated pistol. It features fiber-optic sights on the front and back, making it an excellent, quiet option for basement or backyard plinking. While it can technically shoot darts and bolts, we'll be sticking to BBs and pellets for our tests.

Basic Specifications:

• Action: Single-stroke spring piston

• Caliber: .177 Caliber (BBs and Pellets)

• Capacity: 18-shot internal BB reservoir

• Velocity: Up to 200 FPS

• Weight & Length: 1 lb / 9.0 inches

View fullsize

Umarex Glock 17 Gen 5 MOS CO2 Blowback BB Pistol

Next up is a beauty from Umarex, the Glock 17 Gen 5 MOS. If you love ultra-realistic replicas, this is it. It features a heavy full-metal slide spring, a recessed barrel, and classic white dot sights. The "MOS" means it comes ready with all the mounting plates you need to attach your favorite red dot sights. It runs on a full-size, drop-out 17-round metal magazine and utilizes a full blowback system for ultra realistic blowback operation.

Basic Specifications:

• Action: Semi-auto full blowback, single CO2 cartridge

• Caliber: 4.5mm (.177) steel BBs

• Capacity: 17-round drop-out metal magazine

• Velocity: Approximately 300 FPS

• Weight & Length: 1.5 lbs / 7.95 inches

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

I'm incredibly excited to finally do a proper field test on this one. This is a replacement for a previous model that had a leaky loading valve. This gas-operated, "Mares Leg" style lever-action rifle is heavily modernized. It features a gorgeous real wood stock, an enlarged lever loop, a Picatinny top rail, an M-LOK handguard for accessories, and a mock suppressor on the front.

Basic Specifications:

• Action: Gas Non-Blowback Lever Action (Green Gas)

• Caliber: 6mm Airsoft BBs

• Capacity: 25-round internal magazine

• Velocity: 360 - 390 FPS (with 0.20g BBs)

• Weight & Length: 3.7 lbs / 24.5 inches

View fullsize

Specna Arms SA-E10 PDW Edge AEG Airsoft Rifle

Finally, we have an absolute powerhouse in a tiny package: the Specna Arms SA-E10 PDW. This is a super-compact AR-style AEG with a polymer-metal build and a telescopic stock. Specna Arms goes above and beyond with the box contents on this one. Along with the rifle, you get two S-MAG mid-cap magazines, an additional M90 drop-in spring to easily lower your FPS for indoor fields, a Deans adapter, and a vertical foregrip.

Basic Specifications:

• Action: Electric (AEG) with Pre-installed MOSFET

• Capacity: Includes two 125-round mid-cap S-MAG magazines

• Velocity: 375-390 FPS (Drops to ~310-320 FPS with included M90 spring)

• Length: Minimum 505 mm (approx. 19.8 inches)

• Inner Barrel: 160 mm precision 6.03mm barrel

Stay tuned to the Replica Airguns channel, as I'll be doing dedicated tabletop and field test shooting videos for all of these very soon.

Hey everyone, Michael here from Replica Airguns. We’ve got another July unboxing video for you! If you're wondering why we have two in the same week, I recently realized I had a tiny mystery box video (featuring the ASG CZ P10C) all finished and ready to go, but I completely forgot to hit publish on it. Better late than never!

After getting a little low on review gear in the warehouse, I decided to bring in a new, medium-sized box of goodies to test out. Here’s a quick look at the highlights of what just landed.

View fullsize

Gear Stock Copper-Coated BBs

First out of the box, we have some Gear Stock copper-coated steel BBs. I typically prefer using zinc-alloy BBs, but I haven't used this specific brand specifically. I’m eager to run these through a few tests to see how they perform and whether they may corrode long term leave any black residue in the barrel or on the gun.

Umarex P2P Secure 68P Impact Defense Kit

Next up is the Umarex Prepare to Protect (P2P) Secure 68P, a .68 caliber less-lethal impact defense kit. Right off the bat, the packaging screams quality, it comes in a really nice, durable nylon soft case.

Inside, you get a great variety of ammunition to load into its 6 round metal magazine:

• 6 glass breaker impact rounds

• 6 powder practice rounds

• 6 rubber impact rounds

The pistol itself features a double-action trigger, runs on 12g CO2 (which they thoughtfully include in the kit), and fires at a velocity of around 350 FPS. It has a great weight and feel to it, and I'm looking forward to getting this on the chronograph.

View fullsize

Daisy Woodland Trail Western Carbine (Model 1999)

Finally, we have something that’s just pure fun: the Daisy Woodland Trail Western Carbine 1999. It's a classic lever-action BB rifle but with a modern, outdoorsy twist.

Instead of the traditional wood look, this model features a really cool green stock with a matching trigger. It also brings some nice upgrades to the table, including a Picatinny rail for mounting a red dot or optical scope, a fiber optic front sight, and an adjustable rear sight for elevation. It holds a massive 650 BBs and shoots right around 350 FPS. I haven’t shot one of these green stock versions yet, and I already know it's going to be a blast for backyard plinking.

What's Next?

Stay tuned because dedicated tabletop and field test shooting videos for all of these products are coming up very soon! You know I love shooting these lever-action rifles, so expect a detailed breakdown once I get them out in the yard or here in the sea can Airgun range.

As always, you can find these items available in both our Canada and US stores. Thanks for watching, and don't forget to subscribe to the YouTube channel and follow us across our social media platforms so you don't miss the full reviews!

View fullsize

Today, since it’s raining outside, we are back in the Sea Can Indoor Airgun Shooting Range running a practical indoor field and penetration test on a true heavy hitter from Umarex's T4E lineup: the TC68 (.68 caliber) less-lethal paintball rifle.

If you haven't seen the tabletop video covering the exterior and specs of this rifle, make sure to check that out first. Today is all about seeing what happens when high-velocity nylon meets plywood and steel.

The Setup & Modifications

For this test, we are shooting solid nylon balls that weigh just under 3 grams. However, we are not running this rifle stock.

I’ve slightly modified this TC68 by adjusting the internal velocity valve. By turning that valve further in with a headless Allen key, the gun delivers a larger burst of CO2 per shot. Instead of the stock 15 Joules, this simple screw adjustment pushes the rifle closer to 30 Joules of kinetic energy.

Even with that massive power increase, the nylon balls are traveling at roughly 460 feet per second (fps). Because it stays under the 500 fps threshold, this modified setup remains completely legal here in Canada without requiring a specialized firearms license.

A Quick Note on CO2 Performance: It is worth mentioning that the dual 12 gram CO2 cartridge setup used during this specific test were not brand new, which likely affected the power output to some degree. Because of this, I am planning on making a similar penetration test video in the future using a brand new 88-gram CO2 cylinder, which I believe will perform significantly better and yield even higher kinetic energy transfer.

View fullsize

The Penetration Test

To see what nearly 30 Joules of .68 caliber impact looks like, we set up three different targets.

Target 1: 3-Ply Plywood

• I fired a few rounds straight into 3-ply plywood.

• The high-velocity nylon balls went right through the wood with zero hesitation, even punching through the knots.

• While the velocity naturally dipped slightly after the first couple of shots as the CO2 cooled, the penetration power on those initial shots was absolute.

Target 2: Heavy Galvanized Steel

• Next, we tested the rifle against heavy galvanized steel, specifically, a thick garbage can lid.

• The nylon balls did not penetrate the steel, which is completely expected for a less-lethal platform, but maybe fresh CO2 would have made a difference?

• However, the impact was incredibly loud and left massive, deep dings in the metal.

Target 3: The Double-Smash Test

• For the final test, we set up a stacked, double-layered plastic bucket lid target.

• The TC68 smashed straight through the setup, putting a clean hole right through all layers.

Practical Application & Safety Notes

One of the best features of the Umarex T4E TC68 Less Lethal Paintball Rifle is the quick-pierce CO2 system located in the buttstock. You can load your CO2 and keep it unpierced until the exact moment you need it, ensuring your seals don’t wear out while it sits in the closet. However, be careful, I accidentally pierced my CO2 before the test just by resting the buttstock too hard on the ground!

Ultimately, this is a fantastic tool for home defense. If you ever have individuals trespassing or causing trouble, the intent with this rifle is not to kill, it is strictly less-lethal. The goal is to motivate them to leave your property immediately. Having a less-lethal option like this also provides a much more defensible position should a situation ever go to court.

If you are looking to pick up a TC68 for yourself, you can find them in our Canada and US stores. Thank you for reading and watching. You can find all my video content on YouTube, Vimeo adn Rumble so make sure to subscribe to the channels!

• Buy the Umarex T4E TC 68 Less Lethal Paintball Rifle in Canada

• Buy Paintball Guns in the US

View fullsize

Welcome back for another field test! Today I am taking the E&L AKN 75 AEG Airsoft Rifle out to the range to see what it can do. If you want a deep dive into the specifications, materials, and a close-up look at the hardware, make sure to watch our dedicated Table Top Review. For this video, however, I am focusing entirely on how this rifle performs when putting plastic to paper.

Velocity and Chronograph Performance

To get a baseline for power and consistency, I ran a string of shots through the chronograph using standard 0.25g Airsoft BBs. Here is how the E&L handled right out of the box:

• Shot 1: 360 FPS

• Shot 2: 358 FPS

• Shot 3: 358 FPS

• Shot 4: 358 FPS

• Shot 5: 358 FPS

The consistency on this AEG is outstanding. After a slightly higher first shot, it locked exactly onto 358 FPS for the remainder of the test string.

One major surprise during the chrono test was the trigger system. Out of the box, the E&L AKN 75 AEG Airsoft Rifle operates with a binary-style double trigger, meaning it fires a round when you pull the trigger, and a second round when you release it. This feature makes it incredibly easy to rattle off rapid, successive shots even while staying in semi-automatic mode.

View fullsize

Downrange Accuracy at 30 Feet

Moving on to the accuracy portion of the review, I set up a fresh paper target exactly 30 feet downrange.

• Semi-Automatic Testing: I fired 10 carefully aimed shots in semi-auto mode. The gun delivered an excellent 1.5-inch grouping. The cluster was perfectly centered left-to-right but landed slightly low on the paper. Because the rear sight was dialed down to its lowest notch, fixing this would simply be a matter of bumping up the sight elevation rather than adjusting the hop-up.

• Full-Automatic Testing: I flipped the selector switch and dumped the rest of the magazine. The rifle chugged right along with a distinct, heavy sound, effortlessly shredding the target without skipping a beat.

Build Notes and Battery Fitment

This is an incredibly authentic-feeling replica. The combination of the real wood front handguard and the stamped steel folding rear stock gives the gun a fantastic, realistic weight.

However, you will need to be mindful of your battery choices. The battery compartment underneath the top dust cover is extremely tight and requires a specific, small nunchuck-style battery to close properly. For the purpose of getting this test done, I actually left the dust cover off of the E&L AKN 75 AEG Airsoft Rifle to fit the battery we had on hand. It doesn't affect performance, but it's something to keep in mind when purchasing accessories.

Final Thoughts

The E&L AKN 75 is a rugged, beautiful AEG that backs up its authentic looks with rock-solid consistency and great accuracy on the range.

Where to Buy

• Canada: www.replicaairguns.ca/aks-74n-steel-wood-aeg-airsoft-rifle

• US: www.replicaairguns.us/airsoft-rifles

If you haven't already, please head over to our YouTube, Rumble, and Vimeo channels and hit that subscribe button. We are always working to build our video community back up, and we truly appreciate your support!

In this field test shooting review, we run the G&G PCC45 Pro AEG Airsoft Rifle through our standard range testing, covering raw velocity consistency on the chronograph and accuracy at a distance of 30 feet in both semi-automatic and full-automatic modes. If you are looking for all the technical details, specs, and a closer look at the build, make sure to check out our previously posted Table Top Review. Today, however, is all about real-world performance on the range.

Chronograph Testing

To establish a solid baseline for velocity and consistency, we tested the G&G PCC45 Pro using 0.25g Airsoft BBs. We put a string of rounds through the chronograph to see how it handles out of the box, and the results were impressively uniform:

• Shot 1: 334 FPS

• Shot 2: 334 FPS

• Shot 3: 337 FPS

• Shot 4: 335 FPS

• Shot 5: 334 FPS

Chronograph Verdict

The G&G PCC45 Pro demonstrated excellent consistency, hovering beautifully in the mid-330s with a tight 3 FPS variance across most shots. Averaging right around 335 FPS, this translates to very stable and predictable performance on the field. Keep in mind that because we conducted this test with slightly heavier 0.25g BBs for improved stability, you can expect the velocity to scale up perfectly to standard CQB-friendly limits if you switch to lighter 0.20g rounds.

Accuracy Testing

Moving over to the accuracy portion of our evaluation, we set up a fresh paper target downrange at our standard distance of 30 feet.

• Semi-Automatic Accuracy (10-Shot Group):

  Firing a 10-shot string in semi-automatic mode, the PCC45 Pro delivered a stellar performance. Getting a clear look downrange can be a bit tricky depending on your choice of eyewear, but dialing into the rear peep sight revealed that this rifle is a laser. Out of the box, the 10-shot string punched a remarkably tight 1-inch grouping right near the center. It leaned just a tiny bit low and slightly to the left of the absolute bullseye, but for an unmodified out-of-the-box rifle, that is an incredibly impressive group.

• Full-Automatic Accuracy (Burst Test):

  Switching the selector over to full-automatic "fun mode", we held down the trigger to unleash a heavy, continuous burst to see how much the spread would open up. The spring-fed magazine fed flawlessly, unloading what was left of the mag—likely a solid 90+ rounds, until the mechanical tone changed, signaling we were completely dry. Even under a heavy mag dump, the full-auto spread opened up to just over 2 inches. It chewed a massive, definitive hole right through the paper target, keeping the vast majority of the BBs tightly localized.

View fullsize

Sighting & Ergonomics Note

The built-in iron sights of the G&G PCC45 Pro AEG Airsoft Rifle perform great, featuring a nice, crisp rear peep sight. If you find your shots landing slightly off-center out of the box, the sights are fully adjustable; the rear sight handles windage adjustments (left/right) while the front sight can be moved up or down for elevation adjustments. That said, given the seamless top rail space, adding a premium red dot sight would make a fantastic addition to perfect your sight picture on this platform.

On a quick battery note, managing battery placement on some of these compact platforms can occasionally be a bit tricky out on the range, sometimes requiring a bit of trial and error with different form factors, like nunchuck-style packs, to find the perfect fit inside the tight compartments.

Final Thoughts & Availability

The G&G PCC45 Pro AEG Airsoft Rifle is an exceptionally capable performer. Whether you are a beginner looking for a high-tier primary or a seasoned player wanting a reliable CQB powerhouse, it delivers fantastic accuracy, dependable velocity consistency, and an absolute blast of a full-auto mode.

• Buy the G&G PCC45 Pro M-Lock Airsoft AEG SMG in Canada

• Buy similar AEG Airsoft rifle in the US

Please take a moment to head over to our YouTube channel and subscribe, we are working hard to build that video community up, and your support helps us out a ton!

View fullsize

In this field test shooting review, we run the G&G L85 Carbine AEG Airsoft Rifle through our standard range testing, covering raw velocity consistency on the chronograph and accuracy at a distance of 30 feet in both semi-automatic and full-automatic modes.

If you are looking for detailed specifications, internal details, or close-up styling footage, make sure to check out our comprehensive Table Top Review. Today, however, is all about real-world performance.

Chronograph Testing

We tested the G&G L85 Carbine using 0.25g Airsoft BBs, which are slightly heavier than standard 0.20g ammunition. We put five rounds through the chronograph to establish an average velocity:

• Shot 1: 329 FPS

• Shot 2: 329 FPS

• Shot 3: 328 FPS

• Shot 4: 327 FPS

• Shot 5: 328 FPS

• Shot 6: 328 FPS

Chronograph Verdict

The G&G L85 Carbine AEG Airsoft Rifle demonstrated outstanding consistency, hovering reliably between 327 and 329 FPS averaging 328 FPS. Because we utilized heavier 0.25g BBs for this benchmark, you can expect this rifle to comfortably shoot right around the 360 FPS mark when using standard 0.20g rounds.

This velocity output sits perfectly within Canada’s import requirements, which require a baseline velocity over 366 FPS. It provides an optimal balance for close-quarters battle (CQB) environments while retaining enough power to remain viable for mid-range outdoor field skirmishes.

Accuracy Testing

Moving over to the accuracy portion of our evaluation, we set up a fresh paper target downrange at a distance of 30 feet.

Semi-Automatic Accuracy (10-Shot Group)

Firing a 10-shot string in semi-automatic mode, the G&G L85 Carbine produced a tight, highly respectable 1.5 to 2-inch grouping. The grouping bias leaned slightly high and a bit to the left of the center bullseye, but the consistency from shot to shot was remarkably uniform.

Plaintext

                  [ Target Center ]
                         o
                        /
                       /  Slightly High & Left
                      v
               [ X X X X X ] 
               [  X X X X  ]  --> 1.5" - 2" Grouping

View fullsize

Full-Automatic Accuracy (Burst Test)

Switching over to full-automatic, we aimed slightly low on the paper target and held down the trigger to run through a heavy burst of approximately 50 to 70 rounds until the spring drive ran clear.

Despite a couple of skipped cycles due to the mid-cap magazine running low on ammunition toward the end of the burst, the rifle punched a solid, definitive hole right through the target. The overall full-auto spread expanded slightly but stayed locked within a very consistent 3 to 4-inch grouping.

Operating Impressions

The mechanical performance of the G&G L85 Carbine leaves a distinct impression:

• Rate of Fire: Powered by an 11.1V 3-cell LiPo battery, the rate of fire is snappy and crisp, delivering exactly the kind of aggressive output you want from a high-quality AEG.

• Tactile Feedback: While it doesn't feature a true hard-kicking blowback system, the internal cycling produces a noticeable "shoulder tap" sensation, offering a bit more mechanical feedback than a standard, sterile AEG platform.

• Acoustics: It is worth noting that this is a relatively loud rifle. The gearbox and motor produce a distinct, metallic rattle with every cycle. It sounds robust and mechanical, but it is certainly not a weapon designed for stealth operations.

• Trigger Pull: As an electric switch trigger typical of premium AEGs, the break is highly responsive with virtually no take-up, allowing for quick follow-up shots in semi-auto mode.

Final Thoughts & Availability

The G&G L85 Carbine AEG Airsoft Rifle is an exceptionally solid performer, validating its premium design with excellent velocity consistency and tight groupings on the range.

• Canada Customers: You can purchase this exact model directly through our Replica Airguns Canada Store.

• US Customers: Check out the Replica Airguns US Store for current inventory on this model or comparable bullpup airsoft alternatives.

For more technical reviews, articles, and field trials, head over to Replica Airguns. If you are watching this on an external platform, please head over to our YouTube channel, subscribe, and help us rebuild our video community. We have over a thousand classic review videos archived along with all of our newest releases.