View fullsize

We stopped by the SABRE booth and spoke with Ashley about their Home Defense Pepper Launcher, specifically a second-generation version that (per Ashley) isn’t released yet. With less-lethal options getting more attention in Canada, I wanted to see what’s new, what specs we’re looking at, and whether it’s something we might be able to bring in for reviews and potential store availability.

What’s new with the Gen 2 (as described in the interview)

• “Quick Pierce” magazine system: Ashley demonstrated a faster “pierce and go” style setup, hit the control and you’re ready to aim.

• Pressure indicator: After piercing, an indicator pops out; as CO2 is depleted it retracts, giving you a visual cue that pressure is running out.

• CO2 release button: A control to vent the CO2, then remove the magazine.

Core platform details (current production specs for the .68 launcher family)

These are the commonly listed specs for the current .68 caliber SABRE launcher:

• .68 caliber projectiles

• 7-projectile magazine capacity

• Fiber optic sights (front/rear adjustable)

• Stated velocity up to ~350 FPS

• Range: direct impact effectiveness noted around 60 ft (18 m), with projectiles described as breaking/dispersion capability out to 175 ft (53 m)

Ashley also noted SABRE’s projectiles have a heavier payload than some competitors (in her words) to help with “strength” and accuracy.

Magazines, CO2, and shot count (from the interview)

• CO2 goes into the magazine

• 7 projectiles per magazine

• Two magazines per CO2 (so 14 shots)

Canada angle (what matters for importing)

• Ashley noted the current model is around ~20 joules, and said a Canadian version would likely need to be lower(depending on classification/import requirements).

• SABRE’s own online store states they do not ship internationally, including Canada (so any Canada availability would likely be via distribution/import channels rather than direct-to-consumer shipment).

If we can make the Canada piece work, this looks like a strong candidate for a hands-on review, especially because it’s .68 caliber, 7-round, and built around visibility (fiber optics) and ease of use.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

View fullsize

We stopped by KWA at SHOT Show 2026 and I caught up with Jonathan to check out one of their hottest new releases for 2026: a licensed Kel-Tec Sub 2000 Replica coming in both Airsoft and BB Airgun variants, with blowback-style fun and that signature folding design.

• EMG x KWA Licensed Kel-Tec Sub 2000 (folding rifle)

  • Variants: Airsoft + Airgun/BB version (already confirmed)

  • Magazine: Uses ATT/ATP GT mags

  • Gas options: Green Gas model shown, with CO2 magazines also planned/available

  • Fire modes: Semi + full auto

  • Controls/rails: Ambidextrous charging handle, M-LOK side rail, Picatinny top + bottom

  • Capacity: ~35 rounds (with potential for slightly higher capacity on the BB version)

  • Timing: Announced at the show; expected late Q2 to early Q3 shipping window

This one looks like a perfect fit for anyone into compact, foldable PCC-style Replicas, especially if you want that “Kel-Tec vibe” with modern rails and full-auto capability.

Watch the Full Interview Video:

View fullsize

I caught up with Mark at the Umarex booth to check out a stack of new releases for 2026, ranging from backyard BB “fun guns,” to a major upgrade for the Thompson, plus a dual-fuel hunting/pest-control PCP concept and some serious less-lethal / training options.

• Storm Line BB Rifle (dual CO2, full auto): A traditional, “tamer-looking” BB rifle that’s anything but tame.

  • Capacity: 400-round main reservoir + 25-round ready magazine

  • Action: Full auto

  • Vibe: Affordable, high-volume backyard fun, while keeping the styling less “tactical,” which could help for markets like Canada.

• Ridge Tech Lever Action (CO2): Lever actions are hot, and this one leans modern while staying simple and budget-friendly.

  • Feed system: 8-round magazine + 120-round reservoir built into the mag

  • Use case: Tin-can plinking and family backyard sessions, “CO2 Red Ryder for adults” energy.

• Thompson M1A1 Drum Magazine Upgrade: The #1 request finally landed: a drum mag for the Thompson.

  • Capacity: 400 BBs

  • How it runs: Wind as needed to keep feeding similar to Airsoft High cap magazines

  • Best part: The drum magazine is planned to be sold separately and should work with the older stick-mag Thompson versions too, so existing owners can upgrade without buying the whole gun again.

• Outpost (25 cal) “Dual Fuel” PCP Concept: One of the most interesting items in the booth, a platform aimed at practical use over pure plinking.

  • Power source: Runs on a nitrogen cartridge or as a traditional PCP-style setup out of the box

  • Caliber: .25 only

  • Design notes: Side lever, folding stock for compact carry, onboard spare-mag storage (prototype shown)

  • Positioning: Built for small game / pest work and “preparedness” minded buyers

  • Canada angle: CO2 use (if supported) could drop velocity, but in this form it sounded like it may currently be on the “too fast for Canada” side, so detuned / CO2-focused variants were discussed as a possibility.

• S68 (68 cal, CO2, ~16J): Compact launcher format with real punch for its size.

  • Power: 12g CO2

  • Magazine: 6-shot standard, extended option mentioned

  • Ballistics talk: Roughly ~360–380 fps with a ~46-grain projectile (as recalled in the interview)

  • Ammo pairing: Steel-core “core defense” style rounds were emphasized for hard impact; pepper options depend heavily on local rules.

• HDX 68 “Shotgun Style” (68 cal): A higher-capacity, higher-energy format.

  • Capacity: 16 rounds

  • Energy: ~36 joules mentioned

  • Use case: Home / business defense in jurisdictions where these products and ammo types are legal.

• HDC 68 (M4/Rifle Style, CO2, adjustable): A configurable platform that can run mag-fed or hopper-fed.

  • Tuning: Adjustable velocity

  • Feeding: Magazine or hopper (round ammo works well; shaped rounds can be used depending on orientation)

  • CO2 options: 88g CO2 or adapters for 12g

  • Why not nitrogen (yet): Too much pressure without regulation, risk of damaging projectiles in the barrel.

• New Ruger-Branded 1911 (CO2 blowback): A dressed-up 1911 variant with extra detail.

  • Notable features: Flared magwell, two-tone finish, extended beavertail, competition-style touches

  • Appeal: A strong trainer option for 1911 fans, great feel, realistic handling, and that classic 1911 cycling character.

• Competition-Style CO2 Pistol (single-shot): A purpose-built target/competition format with modern mounting options.

  • Loading: Single-shot

  • Ergonomics: Competition grip + competition styling

  • Mounting: Built-in rail (no “upgrade it just to mount stuff” hassle)

  • Caliber shown: .177, with the obvious question of a future .22 variant.

Watch the Full Interview Video:

View fullsize

We made it to the Barra Booth here at SHOT Show 2026 and once again I caught up with Jacob to check out what’s new for 2026, lots of “modern western” energy this year, plus some serious PCP development and even a very functional slingshot.

• New “cowboy” premium single-action revolver (PCP cartridge-powered): Unlike most revolvers in this category that run on CO2, this one uses refillable air cartridges (small pressure chambers) filled to ~2000 PSI. You load a pellet into the nose cone, charge multiple cartridges at once using a charging manifold (up to six at a time), then drop the loaded cartridges into the cylinder just like shells.

  • Caliber shown: .22

  • Hand pump fill estimate: roughly ~10 pumps (quick top-offs), with a tip to pump → degas → pump againfor more consistent cartridge pressure.

  • Frame/version: brass frame first, with other versions planned.

  • Positioning: premium / highest-quality cowboy-style item in their lineup; made in Italy.

  • Early price talk: roughly $400–$500 range (with cartridges), but still TBD.

• 1866 CO2 Lever Action – Tactical version (launching this year): Built off their popular CO2-powered 1866 lever action (two CO2 cartridges in the buttstock, shells load into the gun, lever cycles and ejects).

  • Updates: black stock, M-LOK fore-end, larger Picatinny section, and paracord wrap on the lever for comfort.

  • Calibers: .22 is the focus (with .177 also planned/available).

• New slingshot (with internal grip magazine): A compact, foldable slingshot that stores ammo in the grip and feeds by gravity—engineered so it releases one steel shot at a time.

  • Uses flat bands (easy to swap/upgrade for strength/velocity).

  • Sighting: built-in sight plus fiber optic references for left/right-handed use and different ranges.

• Replica-style break barrels (AK + M16 formats): Two new break-barrel rifles styled after an AK and an M16 with non-functional replica controls, but standard break-barrel operation.

  • Sights/optics: adjustable iron sights plus Picatinny rail for optics.

  • Calibers mentioned/planned: .177 / .22 / .25.

• New PCP platform: “300Z” (pre-production prototype in hand): A more serious, modern tactical PCP design with:

  • Folding stock, 1913/Picatinny rear, dual gauges, 2-stage trigger

  • Externally adjustable regulator

  • Ambidextrous side lever (convertible)

  • Rotary magazine (prototype shown in .30 cal, 8 rounds)

  • Power testing target: up to ~80 ft-lb in .30 cal

  • Notes: barrel shroud look—not a suppressor; Canada discussion included licensing/detune possibilities.

• Updated PCP: “270Z” (built off the 250Z, redesigned internals): A redesigned system meant to feel more like a traditional bolt action, with increased plenum volume (machined from a solid block of aluminum) targeting ~20% more power than the 250Z.

  • Features: adjustable cheek rest, M-LOK fore-end

  • Timing: Q2 target for the 270Z; Q3 target for the 300Z.

Jacob also emphasized an ongoing push toward higher workmanship, better materials, and improved performance, and it shows, especially in the new premium western revolver and the next-gen PCP lineup.

Watch the Full Interview Video:

We visited the ASG booth with Bob (his 13th SHOT Show) to check out what’s new for 2026, with several updates aimed at Canadian buyers.

• New budget AR AEG line (April/May target): three versions planned (all-polymer, polymer receiver w/ metal rail, and all-metal). Target pricing is about $150 USD (polymer) and $210–$220 USD (all-metal). Includes battery + charger, plus two springs (one outdoor/Canada-legal and one ~330 FPS), with easy spring swaps. Some models include an ETU.

• GL06 40mm launcher: an older favorite that keeps selling, highlighted for its durable build, long barrel, and long firing pin designed for better reliability with a wider range of shells.

• Canada-focused HPA solution (in development): ASG is working on an HPA setup to help gas blowback models meet Canada’s import threshold (they referenced 367 fps) so more options can be brought into the country.

• Canada version P-10 CO2 (March/April target): updated with a higher-velocity valve aiming around ~380 fps, making it Canada import legal. Comes in black and FDE, full blowback, and includes an optics plate for red dots.

• Blaster BBs refreshed: BB lineup is consolidated into Blaster / Alpha Blaster (premium) / Beta Blaster (budget/field), with options like bio and tracer. US availability is expected early February.

Watch the Full Interview Video:

View fullsize

I just got back from SHOT Show 2026 in Las Vegas, and let me tell you, it was an action-packed trip! Over on our channels, we’ve just dropped a fast-paced highlight reel that captures the best moments of our week long stay.

The SHOT Show took place at the Venetian Convention Center, and you’ll see plenty of footage capturing the scale and energy of the event itself: busy show floors, massive booths, indoor and outdoor areas, and the overall atmosphere of one of the largest firearms and shooting-sports events in the world, with Airguns and related gear naturally woven throughout.

But it’s not just airguns, we’ve got slices of Vegas! You’ll catch us strolling Fremont Street, lounging poolside, and soaking up those iconic Vegas vibes between interviews. Whether you’re here for the Airguns or the atmosphere, this video’s got it all, music, cuts, the show floor, and a taste of Las Vegas. Check it out now and immerse yourself in the SHOT Show experience!

I was in Las Vegas last week for SHOT Show, filming content for Replica Airguns, but I wanted to post a quick update so you know what I was up to.

I went to SHOT Show to connect with people in the industry and record a bunch of interviews with vendors and companies, Airgun and aintball brands included (and more). I ended up filming about seven interviews, and now that I’m home I’ve got a lot of great footage to go through.

I was in Vegas with my buddy Steve (the guy behind the camera). Once the filming was wrapped, we spent some time enjoying the city after a busy week. We also did a few things outside of SHOT Show, because if you’re in Vegas, you might as well experience it.

In this video, we’re at the Montecristo Cigar Bar inside Caesars Palace, winding down with a nice port and a cigar.

Stay tuned,now that I’m back, I’ll start editing and posting those interviews. If you want to watch the SHOT Show interview series, head over to Replica Airguns or watch on our Vimeo and YouTube channels as I post them…

View fullsize

In this Table Top Review, we’re taking a detailed look at the KWC 18 CO2 Blowback Steel BB Pistol. This model is part of KWC’s long-running lineup of Glock-style pistols—some licensed through Umarex and others, like this one, produced without official Glock markings but clearly inspired by the platform.

As always, this is a Table Top Review only. A full Shooting / Field Test Video will follow shortly.

I've reviewed many Glock-style CO2 blowback pistols over the years—Gen 3, Gen 4, Gen 5, Airsoft, Steel BB, full blowback, semi-blowback—you name it. KWC manufactures a large percentage of these frames and blowback systems, often for Umarex’s officially licensed Glock models. So while this KWC 18 isn’t a licensed Glock, it’s built by the same people behind many of the Umarex-branded models.

Let’s get into the details, compare it briefly to a couple of Umarex Glock versions, and then talk pros and cons.

View fullsize

Specifications

• Manufactured By: KWC – Made in Taiwan

• Power Source: 12g CO2

• Ammunition: 4.5mm Steel BBs

• Action: Full Blowback (Semi & Full Auto Selectable)

• Magazine: Full-size dropout metal magazine, 18 rounds (Model AAKC MM19)

• Trigger: Single-action-only style, short and light (Glock-like)

• Length: 203mm (8 inches)

• Barrel: 102mm (4 inches), smoothbore

• Weight: 1.7 lbs (771 g)

• Velocity: Up to 314 FPS under optimal conditions

• Sights: Front white dot; rear white half-rectangle

• Safety Systems:

  • Trigger safety (Glock-style)

  • Secondary safety located in the “serial number” plate under the barrel

• Hop-Up: Adjustable hop-up (rare for steel BB pistols)

• Rail: Under-barrel Picatinny rail for lights/lasers

• Field Strippable: Yes – Glock-style takedown system

View fullsize

In the Box

• KWC 18 CO2 Blowback Pistol

• 18-round full-size dropout metal magazine

• Allen key for CO2 tightening

• Small sample pack of steel BBs

• Instruction manual (loading, CO2 installation, hop-up access, takedown, jam clearing)

• Product guide / brochure

The packaging is similar to many Umarex Glock boxes—clean printed box with an internal molded insert.

View fullsize

Comparison to Umarex Glock Models

To give this pistol some context, here’s how it stacks up against a couple of current Umarex licensed Glock variants:

Umarex Glock 17 Gen 5 (Semi-Blowback)

• Has the MOS-style removable optic plate

• Features a semi-blowback system with shorter slide travel

• More efficient gas usage, higher FPS

• Double-action-style trigger (not Glock-accurate)

Umarex Glock 17 Gen 4 (Full Blowback)

• Full blowback with full travel slide

• Uses the same style of full-size dropout metal magazine

• Much closer in function to the KWC 18

• Fully licensed Glock markings

KWC 18

• Same full-blowback feel as the Gen 4

• No Glock markings (unlicensed)

• Adds full auto mode, which the Glock 17 models do not have

• Very similar weight, ergonomics, and trigger feel

• Slightly different slide shape, trigger guard, and frame cuts to avoid trademark conflict

If you’ve handled Umarex Glock models, this KWC 18 will feel instantly familiar.

View fullsize

Walk Around

The KWC 18 is extremely Glock-like in shape and ergonomics, with only small cosmetic changes:

• Slightly longer and differently shaped slide cuts

• Altered trigger guard shape

• Modified rail and frame geometry

• No Glock-branded markings anywhere

Controls are where you expect them to be:

• Slide catch/release on the left

• Trigger safety

• Takedown levers in the Glock position

• Selector switch for Semi / Full Auto just above the trigger area on the left side

• Under-barrel safety disguised as a serial number plate

Sights are classic Glock style:

• White dot front

• White “goalpost” style rear

The full-size dropout metal magazine fits tightly and locks back after the last shot. The slide feel is excellent—strong spring tension, clean metal-on-metal sound, no cheap clanking.

Field Strip

Field stripping is Glock-simple:

1. Lock slide slightly back

2. Pull both takedown tabs down

3. Slide comes forward and off

(Note: KWC pistols are often tight from factory, so the first removal may require a solid tap.)

Inside you’ll find:

• Full metal slide

• Return spring/guide

• Removable inner barrel

• Accessible hop-up wheel

• Fire control components including the semi/full auto mechanism

Reassembly is straightforward once parts are aligned correctly.

View fullsize

Pros

• Excellent weight and feel – solid, realistic, and well-balanced

• Full blowback provides snappy recoil and realistic slide movement

• Single-action Glock-like trigger is short, light, and crisp

• Full-size metal magazine for realistic reloads

• Semi & Full Auto modes (rare for BB pistols)

• Adjustable hop-up — unusual but useful for slight elevation tuning

• Field strippable, great for maintenance and realism

• Picatinny rail for lights/lasers

• Good trainer option for Glock owners thanks to similar ergonomics

• Minimal branding gives it a clean tactical look

Cons

• Full blowback reduces FPS and CO2 efficiency

• Full auto burns CO2 extremely fast

  • Expect maybe one strong magazine and a partial second depending on temperature

• CO2 cooling effects occur quickly during rapid fire

• Tight factory tolerances make the first field strip a bit stiff

• No official Glock markings (a con only if you want licensed branding)

View fullsize

Final Thoughts

The KWC 18 CO2 Blowback Steel BB Pistol is a very solid performer for anyone who wants a Glock-style CO2 pistol with full blowback realism—and especially for those who want the fun of full auto.

The build quality is strong, trigger feel is excellent, the slide operation is smooth, and the ergonomics match real Glock pistols closely enough to make this a legitimate training or plinking option.

If you already own Umarex Glocks, this model will fit naturally into your collection and may even share some compatible magazines (listed as AAKC MM19).

A full Shooting / Field Test Review is coming soon—these KWC/Umarex Glock-pattern pistols are always a blast to shoot.

Buy the KWC 18 BB Pistol

You can purchase this item from our Replica Airguns online stores:

• Canada

• United States

We carry a large selection of Umarex Glocks, KWC Glock-style pistols, airguns, BB guns, airsoft guns, pellet guns, blank guns, and accessories.

Thanks for watching and reading!
Don’t forget to subscribe, and follow us on Facebook, Twitter, and Instagram.
More videos coming soon!

I was away for a bit on a well needed vacation in Kona Hawaii but I’m back now and ready to dive back into things so get ready for more reviews! In this December Massive Mystery Unboxing, I crack open a stack of newer Airsoft and BB guns that landed in the Replica Airguns inventory. Full shooting reviews are coming later – this is your quick spec rundown so you can see what’s what at a glance.

View fullsize

A&K M1873R M-LOK Lever Action Airsoft Gas Rifle

Modern M-LOK handguard wrapped around a classic 1873 lever-action with real wood furniture. Western vibes with tactical mounting options.

• Type: Lever-action airsoft rifle (gas, non-blowback)

• Ammo: 6mm plastic airsoft BBs

• Power: Green gas (internal reservoir)

• Weight: ~2180 g / 4.8 lb

• Velocity: ~350–400 fps with 0.20 g BBs

• Magazine Capacity: 25-round internal magazine

View fullsize

ESG B-10 Gas Airsoft Shotgun

Bullpup “evolutionary shotgun” with a single barrel, selectable 5 or 10-round burst, and an internal gas reservoir in the stock. Uses standard M4-style AEG mags for capacity.

• Type: Gas-powered bullpup airsoft shotgun (single-barrel, burst)

• Ammo: 6mm airsoft BBs

• Power: Green gas (internal reservoir in stock, HPA-convertible)

• Weight: ~3140 g / 6.9 lb

• Velocity: Roughly mid-300s fps, often listed around 370–400 fps with 0.20 g BBs

• Magazine Capacity: 105-round mid-cap G&G GOM V2 magazine

View fullsize

G&G L85 Carbine ETU Airsoft AEG Rifle

British bullpup classic with modern electronics – ETU, MOSFET, and selectable semi / full-auto or semi / 3-round burst, plus blowback for added realism.

• Type: Airsoft AEG rifle (with ETU and blowback)

• Ammo: 6mm airsoft BBs

• Power: Electric (LiPo-ready AEG)

• Weight: ~6 lb / 2.7 kg

• Velocity: ~370–400 fps with 0.20 g BBs (store range 350–400 fps)

• Magazine Capacity: 450-round hi-cap magazine

View fullsize

G&G PCC45 Pro M-LOK Airsoft AEG SMG

Compact .45-style SMG with a lightweight polymer receiver, slim M-LOK front end, and G&G’s Gen.4 MOSFET & ETU. Great choice for a fast, modern CQB/field hybrid build.

• Type: Airsoft AEG SMG

• Ammo: 6mm airsoft BBs

• Power: Electric

• Weight: ~4.44 lb / 2.0 kg

• Velocity: ~360 fps (overall range 350–400 fps with 0.20 g BBs)

• Magazine Capacity: ~105-round mid-cap PCC45 mag

View fullsize

KJWorks KP-19S Hi-Capa GBB Airsoft Pistol

A race-style Hi-Capa with ported slide, fiber-optic sights, threaded barrel and an adjustable “speed” trigger. Runs on both green gas and CO2, with a non-blowback system for efficiency and consistency.

• Type: Hi-Capa style gas airsoft pistol (non-blowback)

• Ammo: 6mm airsoft BBs

• Power: Green gas or CO2 (compatible mags)

• Weight: ~0.9 kg / ~2.0 lb (listed as 0.89 kg)

• Velocity: ~366 fps (FPS range 350–400 fps)

• Magazine Capacity: 25-round magazine

View fullsize

KWC K18 CO2 Blowback Steel BB Pistol

Glock-18 style CO2 BB pistol with select-fire (semi and full-auto), metal slide, polymer frame, and full blowback. Great fun-factor steel BB blaster with 4.5mm ammo.

• Type: CO2 blowback BB pistol (select-fire, semi / full-auto)

• Ammo: 4.5mm (.177) steel BBs

• Power: 12 g CO2

• Weight: ~0.8–0.9 kg / ~1.7–2.0 lb

• Velocity: ~314 fps with steel BBs

• Magazine Capacity: 18-round drop-out magazine

View fullsize

This is part 2 of my 2 part Field Test for the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol. In this video (Part 2), I test out 2.7 gram rubber/steel balls (metal core) to find out what the velocity and accuracy is along with the overall joules energy rating. Umarex claims around 11 joules using the 1.6 gram standard rubber balls, I do expect less velocity and possibly less energy downrange with the heavier 2.7 gram ammunition. While I test out the velocity with my Chronograph, I also aim at a paper target setup 30 feet away to see just how accurate this ammo type is, and hopefully I get all 4 of the max rounds close to where I am aiming on the target.

Starting with velocity or power, I was hoping to get into the 250+ fps so I could get somewhere near the claimed 11 joules, but the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol shot more in the higher 100’s resulting in a three shot average of 176 fps. I did chronograph all 4 shots and they were somewhat close in velocity to each other: 159, 187, 176, 180 fps. Even then the average Joules was only around 4 which is a pretty far off the claimed 11 joules and even less than the 5 Joules I got using the standard all rubber 2.6 gram rubber balls. I did use a brand new CO2 and it was not exactly cold in my testing environment so I am too sure what caused the lower results from both ammo types?

View fullsize

While I was recording the velocity I was simultaneously recording the same 4 shots on the target and I did mange to get all 4 shots on my 8x11 paper target fairly well centered with a grouping with three of the 4 shots all within about 2.5 inches of each other adn very well center to the bullseye. One shot did hit a bit lower extending the group to around 5 inches. If this was an intruder I would have for sure been able to hit them easily at 30 feet away all within their main torso area. So in terms of accuracy with both ammo types, the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol was competent when using both the standard rubber balls and the rubber/steel balls I used in this review.

As mentioned in video 1 of this 2 part series, I do like the smaller size of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol over the non-compact version but it does seem to be down significantly on power as compared to its larger brother adn this was the case using both ammo types. I am not sure if it would be a good deterrent based on the power output I got in my Field Tests. I am sure it would not want to be on the receiving end of this Less Lethal Pistol, perhaps it the intended vital was not wearing any thick clothing it would deter them but even a light jacket would probably stop most of the impact. Maybe at close range some head and face shots would get the job done, but in the heat of the moment I would not count on being able to make those type of consistent shots. My advice is if you want to use the the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol as intended, then go with the non compact version as it does hit the claimed power rating and then some.

• Buy the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol in Canada

• Buy CO2 Paintball Pistols in the US

View fullsize

This is part 1 of my 2 part Field Test for the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol. In this video (Part 1), I test out the included 1.6 gram solid rubber balls to find out what the velocity and accuracy is along with the overall joules rating. Umarex claims around 11 joules using the 1.6 gram rubber balls. While I test out the velocity with my Chronograph, I also aim at a paper target setup 30 feet downrange to see just how accuracy it is, and if I can get all 4 of the max rounds close to where I am aiming. In Part 2 I swap out the 1.6 gram rubber balls for 2.7 gram rubber'/steel balls that have a metal internal core.

Starting with velocity or power, I was hoping to get into the 300+ fps so I could get somewhere near the claimed 11 joules, but the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol shot more in the mid 200’s resulting in a three shot average of 255 fps. I did chronograph all 4 shots but the last shot was really low for some reason, so I tossed that one out to give the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol the benefit of the doubt. Even then the average joules was only 5 which is a far cry to the claimed 11 joules. I did use a brand new CO2 and it was not exactly cold in my testing environment so I am too sure what caused the lower result?

View fullsize

As I mentioned, while I was recording the velocity I was simultaneously recording the same shots on the target and I did mange to get all 4 shots on my 8x11 paper target fairly well centered with a grouping of about 6-7 inches apart. If this was an intruder I would have for sure been able to hit them easily at 30 feet away all within their main torso area. So in terms of accuracy the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol was very usable.

I do like the smaller size of the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol over the non-compact version but it does seem to be down significantly on power as compared to its larger brother. I am not sure if it would be a good deterrent based on the power output I got in this Field Test. I am sure it would not be enjoyable being on the receiving end of this Less Lethal Pistol, but if the intended victim is wearing any type of heavy clothing I don’t think they would be that concerned by this Airgun. Maybe at close range some head and face shots would get the job done, but in the heat of the moment I would not count on being able to make those type of consistent shots. My advice is if you want to use the the Umarex P2P HDP 50 Compact CO2 Rubber Ball Less Lethal Pistol as intended, then go with the non compact version as it does hit the claimed power rating and then some.

• Buy the Umarex P2P HDP 50 Compact CO2 Less Lethal Pistol in Canada

• Buy CO2 Paintball Pistols in the US

View fullsize

In this part two video of our three part video series covering all the different ammo and barrel types that can be used with the Alias GEM Multi Ammo Mini CO2 Airgun, I test out the .50 caliber Paintball (Rubber Ball) barrel and ammo option to see what velocity and accrual I can get from the Alias Gem CO2 Airgun. If you have too already watch my Table Top Video and or my BB and Airsoft Field Test Shooting Video, then make sure to do so when you get a chance. Right off the bat I want to say that the Alias GEM Multi Ammo Mini CO2 Airgun is not at all an Airgun you are going to want to buy in terms of raw performance as you will see in this video and my other Field Test Videos for it in this series. It is however a very unique Airgun you can shoot up close with and have some fun shooting whatever ammo you decide to go with on that given day.

Starting with velocity, I should have put a brand new CO2 in the Airgun as I end up finding out only getting three good shots out of my remain CO2, because of the super short barrel and rather inefficient use of the CO2, you only get around 12-15 full use shots out of the Alias GEM Multi Ammo Mini CO2 Airgun and that is with the larger 12 gram CO2! For that reason I only based my average velocity through my Chronograph on the first three shots I took, which were all pretty close in velocity. Here are the results: 200, 207, 203 with an average of 203 fps using fairly light weight .50 Caliber Rubber Balls. Again the super short barrel does not do this Airgun any favors in the power department.

View fullsize

Moving onto the accuracy portion of this test, well you really don’t need to watch this part as I was not able to hit my 8x11 target setup 30 feet away. Part of the problem is that there are no sights on the .50 Caliber Paintball Barrel and the other factor is that the Alias GEM Multi Ammo Mini CO2 Airgun kind of throws rounds all over the place no matter what ammo or barrel type you choose, so trying to figure out exactly where to aim is kind of hard and so I may have simply not been aiming in the best location on the target to get best results. In hind sight I probably should have just shot this Airgun a lot closer than I do when making my standard Field Test Shooting Videos, but this is my standard shooting location and so I stuck with it.

After I make my videos, I sometimes see things I did not notice when I was making them, and in this case I can see that the .50 caliber Paintball Rubber Rounds I was using did not always go as deep in the barrel as you need to front load them and kind of tap them and let gravity help ease them in. I should have perhaps used a pencil or something like it to push the Rubber Balls all the way in for more consistent performance in terms of velocity and accuracy. Well now we all know! You are not going to be using this Paintball Airgun for any kind of Paintball war games and so in my opinion I would go with the included 6mm Airsoft BB’s for shooting in areas where a 4.5mm metal BB may not be good idea. The 6mm Plastic Airsoft BB’s seemed to have the highest velocity averaging 383 fps with .25 gram Airsoft BB’s and I was able to get some of them on the paper target at 30 feet away.

• Buy the Alias GEM Multi Ammo Mini CO2 Airgun in Canada

• Buy the Alias GEM Multi Ammo Mini CO2 Airgun in the US

View fullsize

In this months Replica Airguns Mystery Unboxing Preview Video, I take a look at 4 new items that showed up at my door. Two Airsoft Rifles, one being AEG and the other one a GBB. I also received two accessories for the GEM Alias super tiny multi ammo CO2 Pistol, A .50 caliber Paintball Barrel for it and and a 12 gram CO2 Adapter.

Both Airsoft Rifles are new to me from a company called Novritsch which is a higher end brand so the pricing is not cheap for either Airsoft Rifle. It was nice to get an AEG and GBB to review, the Novritsch SSR77 AEG Airsoft Rifle is a Replica of the Steyr AUG while the Novritsch SSQ22 GBB Airsoft Rifle is essentially a custom modded Ruger 10/22 copy, at least from what I can tell, it is solid and really well built.

View fullsize

I have already made a Table Top Video for the GEM Alias CO2 Pistol but I have been waiting for the .50 Caliber Paintball Barrel to show up so I can test out all 4 barrel ammo options. I also really wanted the 12 gram CO2 Adapter so I don’t have to use the small 8 gram CO2’s which are harder to find and not as cost effective as the 12 gram CO2. So now I am totally ready to make the GEM Field Test Shooting Review.

This will be my final Interview Video for SHOT Show 2025. I did get to talk with someone from Crosman but the Daisy rep was not around totally with so I did my best to talk about a couple of the Daisy products that I felt were interesting. If you are not aware, Crosman and Daisy have now joined forces together along with Gamo, Benjamin and SPLATRBALL so all of these product were on display at the Crosman Daisy Booth. I focussed on the Crosman M1 Full Auto Carbine and their updated all black ST1 Full Auto BB Rifle. We then took a look at some of the Game Face Airsoft Products and then I performed my own Interview/Review for Daisy talking about the Woodland Trail Model 1911 and Model 25 Lever and Pump Action BB Rifles.

• Buy Replica Airguns in Canada

• Buy Replica Airguns in the US

We recently picked up the Steambow line of Compact Crossbows and I have already made a Table Top Review for some of their products. So far I had not shot or tested any of the Steambow product line yet and so it was nice to get the chance to shoot a few different models over in the Archery Pavilion at SHOT Show and also talk with Tobias their product specialist. I did get the chance to drop by the Steambow Booth and talked with the Steambow team and founder about some of their new products coming out including a new Rubber Ball crossbow they are working on that should be coming out in the near future.

I had the pleasure of interviewing Mark from Umarex again at SHOT Show 2025 and Mark went over some of the new products from Umarex coming out this year. Make started of by showing me two new MOS (Modular Optic System) Gen 5 Glocks in a Glock 17 and Glock 19 versions. Both come with Umarex based red dot sights but you can change them up for something different if you choose to down the road. We then took a look at the new Umarex AER16 AR AEG Rifle in 4.5mm Steel BB rather than 6mm Airsoft similar to the Barra e400 that came out last year. In a nutshell it is a battery/spring operated 4.5mm Steel BB Full Auto AR Replica. Mark then showed us some A&L AK based AEG Airsoft Rifles they are now distributing that feature Full steel body construction with high-quality real laminated wood handguard and skeletal folding stocks. These are one to one in terms of size and weight adn very detailed. We then finished up the interview taking a look at the Legends Saddle Lever Action Shell Loading Rifle and the Umarex Smith & Wesson Competitor Shell Loading revolver.

Luckily I was able to find some time with James again this year and James gave us all the new details on some of the KWA updated and new products. Starting with the KWA ATP-Z Blowback Airsoft Training Pistol added recently to the KWA lineup, James also showed us a few versatile Carbine Pistol Kits made specifically for the ATP-Z and ATP-GT Pistols. Not yet fully released, James went over their updated TAC-9 hopefully coming out this year. We then got a nice tour of the updated Radian Model 1 AEG Airsoft Rifle with built in recoil system also built into KWA’s Q10 AEG Airsoft Rifle.

I spoke with Jacob from Barra and he went over a lot of new products adn updated products Barra is introducing this year. We discussed some new PCP Air Rifles with Canada import options, Jacob went over some new updates to their 1866 Muti-pump BB and Pellet Lever Action Rifle, and he went over Barra’s Gen 2 400e AEG BB rifle which include a higher capacity magazine, an increased velocity and unproved internal tolerances for smoother BB flow. Lastly Barra is introducing high grade 4.5mm BB’s that a re procession ground to be more uniform for improved accuracy and better BB feeding. Great for full auto guns.

It was nice to run into ASG (Action Sports Games) right away and talk with Bob for ASG. Bob always has a great understanding of the ASG product line and each year I Interview him and find out all the news and updated product in the ASG lineup. This year Bob’s goes over the new ASG CZ P-10 C CO2 Blowback BB Pistol, the Action Army C1 Pro Bolt Action CO2 Airsoft Rifle, ASG’s new Frag Impact Sound Grenades, along with some new additions to the Shadow 2 Series of Airsoft Pistols. Was a great start to this years SHOT Show 2025!

I’m back from SHOT Show 2025 Las Vegas and finished transferring and uploading all the video from all the cameras we shot it all on. We had a great time, we met a lot of great folks at the booths and it’s now time to put it all together and make some videos for everyone so I can share the experience!

I always like to put out a “Teaser Video” with some quick clips of the entire experience including some of the travels, a bit of the resort we stayed at, shots of Vegas and of course lots of the SHOT Show 2025 experience along with the booths we visited. Enjoy this quick preview and stay posted for my upcoming Interview Videos shortly…

• Buy Airguns in Canada

• Buy Airguns in the US