Entries in Comparison,6mm

March Rifle Revolver Unboxing Update Video

No Comments

Another Unboxing Update Video taking a look at two Rifles and two Revolvers. A shell loading CO2 dual ammo 1875 single action Remington branded Revolver from Crosman, an 1858 single action CO2 BB Revolver from Barra, another Barra product kind of like a Red Ryder BB Riffle but in dual ammo version with a much different loading system called the Barra 1866, and lastly a Cybergun CO2 Airsoft MP40 with a very different magazine setup than I have seen before.

Crosman - Remington CO2 BB/Pellet 1875 Revolver

  • Manufacturer: Crosman.

  • Powersource: CO2

  • Type: BB Pistol Pellet Pistol

  • Caliber: .177" (4.5mm)

  • Barrel Type: Smooth Bore

  • Trigger Action: Single

  • Magazine Capacity: 6

  • Material: Mostly Metal

  • Safety: Slide

  • Steel BB Velocity: Up to 450 fps

Barra CO2 BB 1858 Single Action Revolver

  • Manufacturer: Barra Airguns

  • Powersource: CO2

  • Type: BB Pistol

  • Caliber: 4.5mm

  • Barrel Type: Smooth Bore

  • Action: Single

  • Capacity: 18 Rounds

  • Safety: Manual

  • Material: Mostly Plastic

  • Max velocity: 400 FPS

Barra Lever Action BB/Pellet 1866 Junior Rifle

Manufacturer: Crosman.

  • Powersource: Spring

  • Type: BB Rifle Pellet Rifle

  • Caliber: .177" (4.5mm)

  • Barrel Type: Smooth Bore

  • Trigger Action: Lever

  • Magazine Capacity: 50BB’s / 1 Pellet

  • Material: Metal/Synthetic

  • Safety: Automatic

  • Steel BB Velocity: Up to 350 fps

Cybergun MP40 CO2 Blowback Airsoft Rifle

  • Powersource: Dual CO2

  • Type: Airsoft Rifle

  • Caliber: 6mm

  • Barrel Type: Smooth Bore

  • Trigger Action: Blowback - Single Action

  • Magazine Capacity: 530 Airsoft BB’s

  • Material: Metal/Synthetic

  • Safety: Switch

  • Steel BB Velocity: Up to 400 fps

Categories: .22 cal, 4.5mm / .177 cal, 6mm, Airsoft, BB, CO2, Pellet, Pistol, Review, Revolver, Rifle, Semi Auto, Vimeo Video, Spring Piston Tags: Barra, Cybergun, Crosman, Remington, Remington 1875, Barra 1858, Barra 1866, Cybergun MP40

March Pistol Unboxing Update Video

No Comments

I’ve got some new Airguns to show everyone today and all of them are Pistols of some sort or another. I show you three 4.5mm BB Pistols from ASG, a Cybergun 1911 NBB BB Pistol, an Airsoft Full Blowback Pistol from EMG and lastly from Umarex, an HK Full Blowback Airsoft Pistol. This is not a full review by any means, the video is mainly to let you know what is coming up in terms of Table Top and Field Test Videos and that we do have these products at least listed in our Replica Airgun Store.

ASG CZ SP-01 Shadow CO2 Blowback BB Pistol

  • Type: BB Pistol

  • Manufacturer: ASG

  • Model: CZ 75 SP-01 Shadow

  • Materials: Full Metal

  • Weight: 1315 g (2.09 lb)

  • Barrel: Smoothbore

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 17 Rounds

  • FPS: 312

ASG Ingram Cobray M11 CO2 NBB BB Pistol

  • Type: BB Pistol

  • Manufacturer: ASG

  • Model: Cobray Ingram M11

  • Materials: Polymer Body, Metal Stock

  • Weight: 531 g (1.2 lb)

  • Length: 255 mm (10 in)

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 27 Rounds

  • FPS: 400

ASG CZ Shadow CO2 Blowback BB Pistol

  • Manufacturer: ASG

  • Model: CX Shadow

  • Materials: All metal

  • Weight: 1230 g (2.7 lb)

  • Barrel Length: 95 mm (3.7 in)

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 18 Rounds

  • FPS: 350-400

Cybergun Thompson 1911 CO2 NBB Pellet Pistol

  • Type: Pellet Pistol

  • Manufacturer: Cybergun, Licensed by Auto Ordnance

  • Power: CO2 Powered

  • Caliber: 4.5mm (.177 cal) Pellets or BBs

  • Fire Modes: Semi-Auto

  • Magazine Capacity: 6rds x 2

  • Muzzle Velocity: 332 FPS (2.3 Joule)

  • Length: 8.66" (220mm)

  • Weight: 2.18lb (990gr)

EMG Salient Arms International SA1 BLU CO2 Blowback Airsoft Pistol

  • Model: SA1 BLU

  • Materials: Metal and Plastic

  • Weight: 772 g (1.7 lb)

  • Length: 190 mm (7.5 in)

  • Power Source: CO2

  • Action: Semi-Automatic

  • Ammo Type: 4.5mm Steel BBs

  • Ammo Capacity: 25 Rounds

  • FPS: 375+

Umarex HK USP 45 Match GBB Airsoft Pistol

  • Model: HK USP Match

  • Materials: Metal and Plastic

  • Weight: 998 g (2.2 lb)

  • Length: 245 mm (9.6 in)

  • Power Source: Gas

  • Action: Semi-Automatic

  • Ammo Type: 6mm Airsoft BBs

  • Ammo Capacity: 28 Rounds

  • FPS: 360+

Categories: 4.5mm / .177 cal, 6mm, Airsoft, BB, Blowback, CO2, GBB, Gas, Pellet, Pistol, Review, Semi Auto, Vimeo Video Tags: Umarex, EMG, Cybergun, ASG, HK45, H&K USP, M1911, Thompson Custom 1911, Salient Arms International, SA1, CZ SP-01 Shadow, Ingram M11, CZ Shadow

KWC K17 Black Barrel CO2 Blowback BB Pistol Table Top Review

No Comments

Type: Blowback BB Pistol.
Manufacturer: Made and Distributed by KWC.
Model: K17 (Black Barrel Version).
Materials: Metal & Polymer.
Weight: 1.68 pounds (760 grams).
Barrel: 4.3 inches metal non-rifled.
Propulsion: 1 x Co2.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 4.5mm steel BB's.
Ammunition Capacity: 17 round drop out full size metal magazine.
FPS: Claimed 329.

Trigger Pull: The trigger pull on the KWC K17 Black Barrel CO2 Blowback BB Pistol is short with only a little bit of take up, the release is light and crips. The blowback action resets the internal Hammer / Striker with each shot for that true single action trigger and it’s also nice that the trigger does have a working trigger safety. You will need to rack the slide for the first shot but then the blowback action takes over for the rest of the shots.

Accuracy: I have already made a Field Test Shooting Video for the Gold Barrel version of this same KWC K17 pistol so you can check out that video here to see how the Black Barrel Version will essentially shoot. If you want to know right here and now the KWC K17 shot right around 325 fps and got a 4 inch grouping at 30 feet away shooting 10 rounds into a paper target. Maybe the Black Barrel Version will shoot a bit differently for me? We will find out soon enough…

Build Quality: The KWC K17 Black Barrel CO2 Blowback BB Pistol feels really good, I’m going to say it’s probably one of the nicest KWC CO2 blowback pistols I have had in my hands to date. The finish is really nice, the polymer frame is flawless and fit is really good with nice tight tolerances throughout. it may even look better to me than the Umarex Glock version it is similar to?

Realism: The KWC K17 Black Barrel CO2 Blowback BB Pistol being a full blowback Airguns is supper realistic in terms of looking like and functioning like a real steel gun. All the parts function as you would expect them to including the ability to filed strip the KWC K17 which gives you easy access to the hop-up. In terms of the KWC K17 Black Barrel CO2 Blowback BB Pistol being a replica it does look similar to Glock with some differences like the trigger guard, slide cut-outs, extended beaver tail and straighter pistol grip. As I shoe in my Review video the parts even mix and match with the Umarex Glock 17 Gen 4 CO2 Blowback BB Pistol we also sell.
Available From: The Replica Airguns Store.

Pros:

  • Good weight with very solid feel to it.

  • Full blowback action will produce good recoil effect.

  • Full size drop out metal magazine.

  • Short and light single action only trigger.

  • No ugly markings or warnings.

  • I prefer the more standard look of this Black Barrel Version.

  • Field strips like the real steel version.

  • White dot sights front and back.

  • Adjustable hop-up to adjust for some limited elevation as needed.

  • Working trigger safety along with serial number safety.

Cons:

  • Full blowback action will produce lower fps and use up more CO2.

  • But plate could be more like the Umarex Glock version.

Comments:

I really like the KWC K17 Black Barrel CO2 Blowback BB Pistol as I did the Good Barrel Version, it may even be one of my favorite CO2 Blowback BB Pistols from KWC to date. I am not a huge fan of the Gold barrel version but that’s a personal preference thing. All in all if you’re looking for that Modern Pistol design than the KWC K17 CO2 Blowback BB Pistol is going to fit the bill. If you are a Glock fan also make sure to checkout our Umarex Glock line of CO2 BB, Airsoft and even Paintball Replica Pistol in our online Replace Airgun stores…

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: KWC, K17, KWC K17, Glock

SHOT Show 2024 Replica Airguns - KWA Interview

No Comments

This year at the KWA Booth I had the pleasure of running into John, and we went over a bunch of new items KWA had on display. John was even rocking a similar pair of Ray Ban Meta AI Glasses which made us look a little bit like twins…

In this KWA SHOT Show Interview John higgled the following products from KWA: The KWA ATP-Z and ATP-CT Optics Ready GBB AIrsoft Pistols which are convertible to SMG versions, along with a new prototype TAC-9 GBB Airsoft Rifle.

KWA AIrsoft products have always been one of favoriteAirsoft guns for their quality, looks and performance. They tend to offer a lot of Gas Blowback options which I really appreciate as a Replica AIrgun Collector.

Categories: 6mm, AEG, Airgun News, Airsoft, Airsoft News, CO2, Full Auto, Gas, GBB, Pistol, Replica Airguns News, Rifle, Semi Auto, Vimeo Video Tags: KWA, SHOT Show 2024, SHOT Show

SHOT Show 2024 Replica Airguns - ASG Interview

No Comments

It’s alwasy nice to have a chat with Bob at ASG, I have been interviewing him for years now and really missed not being at SHOT Show the last three years. As always, Bob really knows the ASG product line inside and out and took us through some of the new products and changes to the ASG lineup in 2024.

Some of the products include: The ASG CZ P-10 C CO2 Blowback Airsoft Pistol, the Steyr L9-A2 CO2/Gas Blowback Airsoft Pistol, the USW Gas Blowback Airsoft Pistol, the new Hybrid Airsoft line including the CO2 Blowback H-22 and the AEG H-15, the ICS Ape SE AEG Airsoft Rifle, and lastly the ICS Carnotaurus, Legacy, ACME High-Capa Pistol Series.

I am looking forward to get my hands-on many of these new ASG products and making reviews for everyone to checkout in the near future…

Categories: 4.5mm / .177 cal, 6mm, AEG, Airsoft, Airgun News, Airsoft News, BB, Blowback, CO2, Full Auto, Gas, GBB, Pistol, Pellet, Replica Airguns News, Rifle, Semi Auto, Vimeo Video Tags: ASG, SHOT Show 2024, SHOT Show

SHOT Show 2024 Replica Airguns - Barra Interview

No Comments

I’m pretty sure I have never made an Interview for Barra before in any of my past SHOT Show Videos, so I was really happy when I visited their booth and discovered a bunch of really great new products to talk about with GEO. Like many other Airgun companies, Barra does incorporate rebranded products from other manufacturer popular Airguns, but they also have some unique products I have never seen before. They are either working really closely with dedicated manufacturing companies or making these items in house. Either way it’s great to see new and interesting products.

Some of the products Geo went over with me in this SHOT Show 2024 Barra Interview where: The Barra CO2 1866 Lever Action Rifle, some Rifled Pellet Barrel Kits for the Schofield Revolver and 1866 Rifle, the 1858 CO2 BB Revolver, the 357 Shell Loading CO2 Revolver, the 400 AEG Airsoft Rifle and two new nameless Airguns they are still working on and perfecting, a full Blowback Competition Style BB/Airsoft Pistol and a compact AEG Airsoft Rifle.

It was great talking with the team over at the Barra Booth and I look forward to testing out their new items as they become available.

Categories: .22 cal, 4.5mm / .177 cal, 6mm, AEG, Accessory, Airsoft, Airgun News, Airsoft News, BB, Blowback, CO2, Full Auto, Gas, GBB, Pellet, Pistol, Replica Airguns News, Revolver, Rifle, Semi Auto, Vimeo Video Tags: Barra, SHOT Show, SHOT Show 2024

SHOT Show 2024 Replica Airguns - Umarex Interview

No Comments

Kicking off my SHOT Show 2024 Interviews, I present my Umarex Interview with Mark Davis, you may remember Mark from past Umarex SHOT Show Interviews? This is a fairly long interview as Mark had a lot of product to show me including…

The new Marlin Lever Action BB Rifle, the Walther PDP CO2 BB Pistol, the BBX11 1911 Blowback CO2 BB Pistol, the MarkPoint Break Barrel .177 Caliber Pellet Pistol, the Trinity Hi-Cap 2011 Blowback Airsoft Pistol, the Gambler High Stakes Single Action Army CO2 Airsoft Revolver, the Glock 380 GBB Airsoft Pistol, the CQC Elite Force AEG Airsoft Rifle with i-Trace, and the Beretta PMX GBB Airsoft Rifle.

Yep, that’s a lot of products to go over in one Interview, and Mark did a great job! I am really looking forward to getting my hands on these new products from Umarex to review for everyone!

Categories: 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, Break Barrel, CO2, Full Auto, Gas, GBB, Pellet, Pistol, Replica Airguns News, Revolver, Rifle, Semi Auto, Single Shot, Spring Piston, Vimeo Video Tags: Umarex, SHOT Show, SHOT Show 2024

Crosman SNR357 CO2 Dual Ammo Revolver Table Top Review

No Comments

TypeBB Pistol Pellet Pistol.
Manufacturer: Distributed by Crosman.
Model: SNR357.
Materials: Mostly metal, some plastic parts.
Weight: 1.92 pound (871 grams).
Total Length: 8.13 inches (20.65cm).
Barrel: 3 inches (7.6cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver single and double action.
Ammunition Type: 4.5mm BB’s / .177 cal. pellets.
Ammunition Capacity: 6 round cylinder.
FPS: Claimed 400.

Trigger Pull: The Crosman SNR357 CO2 Dual Ammo Revolver has both a single and double action trigger, meaning you can pre-cock the hammer and shoot in single action which has a light short trigger pull. Or you can simply shoot in double action by pulling the trigger when the hammer is down and the trigger will cock the hammer and also release it to fire the Revolver. In double action the trigger is noticeably longer and heavier than in single action as your trigger finger now has to do all the work for the action. Having both single and double action is nice as you can shoot in action rapid fire using the double action or slow down and shoot with more accuracy in single action.

Accuracy: I have not tested out this exact Crosman SNR357 CO2 Dual Ammo Revolver but I have reviewed several similar products from Dan Wesson which essentially are the exact same mechanical gun manufactured by Wingun for both ASG and Crosman. I will be making a new Field Test Video for the Crosman SNR357 in a week or two but you can take a look at my recent Field Test Video for the Dan Wesson 2.5 inch Gold version which is mechanically the same gun as the Crosman SNR357 CO2 Dual Ammo Revolver.

Build Quality: When it comes to the build of the Crosman SNR357 CO2 Dual Ammo Revolver, it is alsmot all metal other than mainly the grips and the CO2 tab as far as I can tell. It weighs in at nearly 2 pounds even for a more compact revolver so it feels very hefty in the hand. In similar Dan Wesson models there has been some concerns with the hammer feeling a bit sloppy but this has never caused any concern in terms of functionality. I also am not a fan of the way the grips slide back for access to the CO2 as they can come off and misalign when trying to put them back in place. Other than that this pistol is a solid well made revolver.

Realism: The Crosman SNR357 CO2 Dual Ammo Revolver is styled after a 357 type snub nosed revolver and looks for the most part true to scale and form. As this product design was one of the first shell loading revolvers back in the day, manufacturers had to use parts that where already available as in the CO2 valves which where at the time a bit longer than they can make now. Because of this, the area between the cylinder and the back the revolver is a bit long to accommodate the longer valves made at that time. This does distorts the gun a little bit but to be honest most people will not notice.

Pros:

  • Design has been around for a while now and so it is well tested.

  • A decent looking replica of a 357 type revolver.

  • Single and double action trigger allows for both action and more laid back and precise shooting ability.

  • 400 claimed fps is more than adequate for plinking and action shooting.

  • Always fun loading up the 6 removable shells and placing them in the cylinder.

  • Fully adjustable sights for dead center shooting.

  • CO2 is fully well hidden inside the grips.

  • Can choose between shooting pellets or BB’s.

Cons:

  • Barrel is not recessed.

  • Area between cylinder and hammer is a bit long as it has to accommodate the CO2 valve.

  • Grip removal can be a bit finicky.

Comments:
The Crosman SNR357 CO2 Dual Ammo Revolver is far from a new styled gun on the market, it’s been around for about a decade originally introduced main stream by ASG as their Dan Wesson 357. Being an older styled airgun means any issues it may have had are now for sure worked out so you know you are getting a solid and reliable Air Pistol here. If you are looking for an updated 357 then take a look at the Dan Wesson 715 series as some of the issues I have mentioned with the SNR357 are worked out on the newer style 357 Revolvers.

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Pellet, Review, Revolver, Vimeo Video Tags: Crosman, SNR357, Crosman 357, 357

Crosman Fortify Single Action Army CO2 BB Revolver Table Top Review

No Comments

TypeBB Pistol.
Manufacturer: Distributed by Crosman.
Model: Fortify.
Materials: Mostly plastic, some internal metal parts.
Weight:1 pound (455 grams).
Total Length: 10.5 inches (26.6cm).
Barrel: 5.55 inches 14cm) metal non-rifled.
Propulsion: CO2.
Action: Revolver SAO.
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 18 round internal magazine.
FPS: Claimed 420.

Trigger Pull: The trigger pull on the Crosman Fortify Single Action Army CO2 BB Revolver is a single action only trigger, so you will have to cock the hammer back before each shot which does take away most of the trigger pull length and weight, making it short and light and easy to shoot. Perfect for slowed down accurate shot placement, but less effective as an action shooter.

Accuracy: I have not tested out the Crosman Fortify Single Action Army CO2 BB Revolver any capacity, nor do I have any experience with it as the design is new from Crosman and I have not seen it before with any other Airgun on the market. So for now all we can go on is what Crosman claims, which is around 420fps and when it comes to accuracy your guess will be as good as mine so keep checking back for my upcoming Field Test Shooting Video for the Crosman Fortify Single Action Army CO2 BB Revolver were I will test the velocity and accuracy out in the Replica Airguns Indoor Sea Can Shooting Range.

Build Quality: When it comes to the build for the Crosman Fortify Single Action Army CO2 BB Revolver, there is not a lot to write home about. It is basically a mostly plastic gun with some metal parts internally like the barrel, trigger, hammer and CO2 area. The Crosman Fortify has that lower cost Airgun, two halves, screwed together build which generally looks better on the side without the screws showing. As it is mostly plastic it is very light in the hand at around a pound or so. Overal there are not a lot of moving parts so it should be reliable enough just because of this. All the mechanical components do what they need to do and feel solid enough.

Realism: The Crosman Fortify Single Action Army CO2 BB Revolver at a glance looks a lot like a Colt Single Action Army Revolver, it has the same shape and size but the weight is very slight. The lack of actual bullet holes in the cylinder looking from the front of the revolver also takes away from the realism. I guess I am really used to the new generation revolvers with working cylinders and real loadable shells but these guns are more expensive and hold less ammo as they are genuine to the 6 shooter capacity.

Pros:

  • Inexpensive revolver as compared to other shell loading styled revolvers out there.

  • A decent looking replica of a Colt Single Action Army revolver.

  • Single action only trigger is short and light and well suited to careful shot placement shooting.

  • 420 claimed fps is about perfect for plinking at ranges up 30-40 feet.

  • 18 round magazine has a nice high capacity and easy to load when empty

  • Safety is well thought out and built into an already existing part of the gun rather than simply adding a switch afterwards.

  • I like the look with the all back frame and bone white grips.

  • CO2 Allen key is built into grip so always have it on hadn’t and will not lose it.

Cons:

  • Mostly plastic builds makes it a bit light in the hand.

  • No fake shell holes in the front of the cylinder, could have added this for a more genuine look.

  • Safety is rather on the the firm side.

Comments:
The Crosman Fortify Single Action Army CO2 BB Revolver is a completely new concept in design over what we have become use to in todays Single Action Army Revolvers. I want to hold my opinion on it till I actually shoot it as that could make or break this one for me. Maybe if it is a really fun shooter then I can excuse some of the shortcomings it has as a Replica Revolver but I guess we will see in a little bit when I get to my Field Test Shooting Review for it. For under $100 it may be worth it to some to try out especially if you don't already own a Single Action Army Revolver in your Airgun collection.

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Revolver, Vimeo Video Tags: Crosman, Fortify, Colt Single Action Army

Cybergun FN Herstal P90 NBB AEG Airsoft Rifle Field Test Review

No Comments

This was a really fun Field Test Shooting Video review. I don’t believe I have ever tested out a version of the P90 before and generally I don’t get a lot of Bullpups on my table so this was a bit of a treat shooting the Cybergun FN Herstal P90 NBB AEG Airsoft Rifle! If you have not already watched my Table Top Review for the Cybergun FN Herstal P9, then makes sure to do so for more details, specifications and close up video.

Starting with my Velocity FPS test, I placed several rounds through my Chronograph and once they evened out a bit, I averaged out my last 5 shots and was able to get a 427 fps velocity using .20 gram plastic Airsoft BB’s. Which is really close to the 436 fps claimed velocity made by Cybergun. I did notice that when I had a fully loaded magazine that I did get some occasional lower velocity shots perhaps because of too high of spring tension the magazine and this causing some loading issues? So do not load the magazine too much and cause the spring tension to overload it.

Moving on to my Accuracy test, I placed a fresh paper target 30 feet down range and first shot 10 rounds in semi auto followed by the rest of the magazine, so I would say around 45 shots in full auto. I was able to get around a 1.5 inch grouping shooting 10 rounds and that opened up just a bit when I unloaded the rest of the magazine in full auto tonight around a 2 inch grouping. Shot placement is kind of irrelevant as theCybergun FN Herstal P90 NBB AEG Airsoft Rifle does not come with any sighting system so you will need to add your own Red Dot or picatinny compatible sight to it and of course adjust it to your preferred shot placement.

I typically prefer compact AR type CQB Airsoft rifles for their small and light size and perhaps just a little because of the way they look. That said I really like the look of the Cybergun FN Herstal P90 NBB AEG Airsoft Rifle, and it checks all the boxes as a CQB AEG Airsoft choice. The Cybergun FN Herstal P90 not only looked the part but performed really good and I would say could be used not only for CQB but for just about any Airsoft battle situation, as it had a nice high fps and was able to place rounds accurately down rage in both semi and full auto. With the Cybergun FN Herstal P90 NBB AEG Airsoft Rifle you get a really great performer, looker and the price is right considering it comes with almost everything you need in the box, including the battery and charger. Just keep in mind you will have to add your own sighting system, but that’s not a deal breaker since most people often change their sights anyway.

Categories: 6mm, AEG, Airsoft, Field Test, Full Auto, Review, Rifle, Semi Auto, Vimeo Video Tags: Cybergun, FN Herstal, P90

Cybergun FN Herstal P90 NBB AEG Airsoft Rifle Table Top Review

No Comments

Type: AEG Airsoft Rifle.
Manufacturer: Distributed by Cybergun.
Model: FN Herstal P90.
Materials: Mostly plastic, some internal metal parts.
Weight: 4.9 pounds (2330 grams).
Total Length: 20 inches (508mm).
Barrel: 10.25 inches (360mm) metal non-rifled.
Propulsion: AEG.
Action: Semi & full auto NBB SAO.
Ammunition Type: 6mm plastic Airsoft BB’s.
Ammunition Capacity: 68 round magazine.
FPS: Claimed 436 (.20 gram BB’s)

Trigger Pull: The Cybergun FN Herstal P90 NBB AEG Airsoft Rifle is an AEG which uses a battery to power a motor that pulls a spring back for each repetition of each shot which means the trigger is essentially an electric on off switch. This makes the trigger function very much like a single action trigger. Generally single action triggers are fairly short and light in feel and the Cybergun FN Herstal P90 NBB AEG Airsoft Rifle is no exception. There is about a quarter inch or so pull and then the on switch is triggered.

Accuracy: I have not shoot the Cybergun FN Herstal P90 NBB AEG Airsoft Rifle just yet or performed my standard Field Test Shooting Video, so I can not comment at this time on the actual performance other than what is claimed in terms of fps (436fps). This is a fairly new styled Airsoft Rifle to me so I can’t even offer any real historical information from shooting similar type AEG Airsoft rifles. So we are all gong to just have to wait and see on this one to understand just what the real world velocity and accuracy will be.

Build Quality: TheCybergun FN Herstal P90 NBB AEG Airsoft Rifle is on the outside almost all plastic but for a compact CQB styled rifle it does weigh a fair amount at almost 5 pounds so it does feel really solid in the hand. I imagine there must be a fair amount of internal metal mechanic parts going on in order to boost up the overall weight. I did notice that the area where the picatinny rails are located is all metal, so the entire area where the rear portion of the magazine sits in. What I consider to be the stock portion is all plastic which is not surprising.

Realism: The Cybergun FN Herstal P90 NBB AEG Airsoft Rifle is a licensed replica of a real steel FH Herstal P90 Rifle and has all the official FN branding on it via Cybergun licensing. It really does look accruate in almost dry way including the semi transparent magazine that shows what looks to be very real 5.7x28mm ammunition. The only real tell tale part would be the orange flash hiden which you can swap out for a more realistic all back version if you choose to.

Pros:

  • Has good overall weight considering mostly plastic external build.

  • Easy to get to and use hopup, just need your hands.

  • Ambidextrous trigger super easy to adjust right at your finder tips.

  • Comes with Battery and Charger.

  • Comes with a speed loader and cleaning jam rod.

  • Sling mount in the back.

  • Front top PicatinnyRail for red dot, scope.

  • Side Picatinny rails for a laser or tac light setup

  • Easy to get to battery compartment.

  • Fully licensed trademarks via Cybergun.

  • Very compact design , great for CQB battle situations.

  • Fairly high claimed fps! We will see?

  • Reasonable price in the Replica Airguns Canada and US Store.

Cons:

  • Mostly all plastic exterior.

  • Come with an orange tip.

  • Does not come with any type of sighting system.

Comments:

The Cybergun FN Herstal P90 NBB AEG Airsoft Rifle is a real unique looking rifle with its super compact CQB design. I am not sure everyone will like this style of AEG Airsoft Rifle but it is refreshing to see something other than another AR. I like that you get almost everything you need to get shooting with the FN Herstal P90 but keep in mind you will need your own sighting system and I recommend you put something like a compact red dot on it to go along with the compact build. I would also switch out the flash hider for something better looking and at some point upgrade the battery setup for an 11.1 volt lithium. All that said for under $300 Canadian and a bit over $160 US, it is good value but I will leave my final thoughts until after I make my Field Test Shooting Video most likely next week.

Categories: 6mm, AEG, Airsoft, Review, Semi Auto, Vimeo Video, Full Auto Tags: Cybergun, FN Herstal Five-seveN, P90

Crosman Triple Threat CO2 Dual Ammo Revolver Field Test Review

1 Comment

I have already reviewed several Crosman 357 Pellet/BB Revolvers in the past like the Crosman Vigilante which also has the ability to shoot both .177 caliber pellets and 4.5mm Steel BB’s, (Really they all are with the right magazine). With the Vigilante my pellet chronograph tests got similar results but with Steel BB’s the Crosman Vigilante did a lot better than my Crosman Triple Threat CO2 Dual Ammo Revolver using a similar 6 inch barrel. As expected both the Crosman Vigilante and the Crosman Triple Threat did about the same in terms of accuracy getting better results with pellets over Steel BB’s.

Starting with the velocity portion of my Indoor Field Test Shooting video, I placed a brand new 12 gram CO2 into the Crosman Triple Threat CO2 Dual Ammo Revolver and tested out some 7 grain .177 caliber Lead Pellets. I averaged 382 fps in what I would consider normal indoor temperature ranges so you can expect a bit higher velocities in warmer conditions. Moving on to 4.5mm 5.1 grain Steel BB’s, I averaged quite a bit lower velocity at 288 fps. I was surprise since it was almost 100 fps lower than the heavier 7 grain lead pellets. The logical reason for this is that lead Pellets fit the barrel much more snug, stoping any CO2 from getting around them which helps increase the velocity over Steel BB’s which are a hard metal and need to be slightly smaller in diameter and therefore do let some CO2 get by reducing the pressure behind them.

For the accuracy porting of the the Indoor Field Test I shot 10 rounds for my pellet magazine first and then 6 rounds for the BB magazine, simply because this is how many rounds each magazine holds… Makes sense right? Even with the pellet magazine holding 10 rounds over the BB magazine’s 6 rounds, the Pellet magazine was still able to get a much tighter grouping at around 1 inch over the BB target which was closer to 3 inches. BB’s seemed to really like to hook a bit with the Crosman Triple Threat CO2 Dual Ammo Revolver, so I would for sure go with pellets if accuracy is importatn to you. Both pellets and BB’s shot a little bit high and to the left from the bulls-eye but that can easily be adjusted with the fully adjustable rear sight.

The Crosman Triple Threat performed rather as expected and was not a big surprise other than the BB’s really having a much lower velocity this time around. It is clear to me that I would not waste my time shooting Steel BB’s unless this is all I had on hand as they where not only much slower but also a lot less accurate. Over time the steel BB’s could damage the rifled steel barrel effecting future pellet accuracy. The Crosman Triple Threat CO2 Dual Ammo Revolver offers a lot of options with ammo choice and barrel choice that alter it’s looks and even performance to some degree but if you want a Crosman 357 type CO2 Revolver than it for sure gives you the most flexibility.

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Field Test, Pellet, Pistol, Review, Revolver, Vimeo Video Tags: Crosman 357, Crosman, 357, Triple Threat

Bear River BR45 NBB CO2 BB Pistol Table Top Review

No Comments

Type: Non-blowback CO2 BB Pistol.
Manufacturer: Distributed by Bear River.
ModelBear River BR45.
Materials: Mostly plastic.
Weight: 1 pounds (454 grams).
Total Length: 8 inches (203mm).
Barrel: 4.72 inches (120mm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto non-blowback, DOA trigger.
Ammunition Type: .4.5mm steel BB’s.
Ammunition Capacity: 20 round drop out metal stick magazine.
FPS: Claimed 410.

Trigger Pull: The Bear River BR45 NBB CO2 BB Pistol has a double action trigger commonly found on lower cost NBB CO2 BB Pistols with a long trigger pull that requires more length and effort to pull, but I would say is still usable for action shooting. Your finger will get worked a bit after several magazines of action shooting. The Bear River BR45 trigger pull makes the internal metal barrel move forward and out of the front of the barrel opening but as it has a recessed barrel you don’t really see it protruding out of the front. When you reach the release point the barrel snaps back into the BB Pistol acting like the hammer and releasing CO2 and shooting a BB.

Accuracy: I have not shoot the Bear River BR45 NBB CO2 BB Pistol yet or performed my standard Field Test Shooting Video, so I can not comment at this time on the actual performance other than what is claimed in terms of fps (410fps). I have shot several similar CO2 BB Pistols which share almost the exact same internal components but have a different external skin on them. One bonus is that all this style of metal stick magazines are the same so they will be interchangeable. My previous experiences with similar BB Pistols is that they will get mid 400fps velocities and in general will shot around a 2 inch grouping or so. It is hard to say how close the Bear River BR45 is going to shoot to the bullseye, as out of the box it may shoot a bit high or low or left or right. We will find out during my shooting test.

Build Quality: The Bear River BR45 NBB CO2 BB Pistol is an almost all plastic moulded Airgun with only a few metal parts I can pick out. The trigger and magazine are metal along with the inner barrel and the area where the CO2 goes in. Because of the plastic build, it is rather light weight at around 1 pound which can actually be good if you were to drop it on a hard surface as the mass is low resulting in less damage. Scratches will also be less noticeable on an all plastic exterior Airgun over a metal Airgun as the material on a plastic Airgun is going to have the color throughout the material rather than a painted surface that will show blemishes a lot more. The simplicity of the design means you should get a lot of use from the Bear River BR45 before encountering any issues.

Realism: The Bear River BR45 NBB CO2 BB Pistol is not a replica of an exact real steel gun in production but it does take after a Sig Sauer or H&K looking at the basic shape and features. There are few external mechanical working parts on the Bear River BR45 other than the trigger, safety, magazine and inner barrel. The barrel is well recessed and the CO2 tab is sunken in the grip which helps in terms of it looking more realistic.

Pros:

  • Nice size BB pistol, feels good in the hand.

  • Decent FPS rating of 410.

  • Picatinny rail on frame for adding on accessories.

  • Non-blowback should get lots of shots per CO2.

  • Easy to see white dot sights front and back.

  • CO2 tab is recessed and somewhat hidden under the grip.

  • Double action trigger pull is long but not too firm.

  • Uses a generic all metal stick magazines commonly found in lower cost BB pistols.

  • Recessed barrel looks that part.

  • Simple design with not a lot of moving parts will make it reliable for a long time.

Cons:

  • All plastic gun for the most part.

  • Not many working parts, pretty much all moulded gun.

  • CO2 tab a bit hard to use for people with bigger fingers.

Comments:

The Bear River BR45 NBB CO2 BB Pistol is a basic mostly all plastic NBB CO2 BB Pistol very simple in design which makes it dependable and reliable as there is a lot less to go wrong as compared to a blowback metal BB Pistol with lots of moving parts. Also keep in mind the metal in Airguns is not as hard or strong as you find in a Real Steel Pistol so all of these moving metal parts will wear over time and some may eventually fail. Other advantages of a NBB CO2 BB Pistol are that it will have a decent velocity rating and it will also get more shots per CO2 as compared to blowback Air Pistols, so not only is the initial cost of a simple NBB Air Pistol going to be less but also you will not need as much CO2 to operate it. I do like the size of the Bear River BR45 NBB CO2 BB Pistol as it is a bit larger than similar NBB Replica Air Pistols which for me and my larger hands is a good thing.

Categories: 4.5mm / .177 cal, BB, CO2, Pistol, Review, Semi Auto, Vimeo Video, Comparison Tags: Bear, BR45

Barra 380 NBB CO2 BB Pistol Table Top Review

No Comments

Type: Non-blowback CO2 BB Pistol.
Manufacturer: Distributed by Barra.
ModelBarra 380.
Materials: Mostly plastic.
Weight: .93 pounds (422 grams).
Total Length: 6.89inches (175mm).
Barrel: 4.25 inches (108mm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto non-blowback, DOA trigger.
Ammunition Type: .4.5mm steel BB’s.
Ammunition Capacity: 20 round drop out metal stick magazine.
FPS: Claimed 410.

Trigger Pull: The Barra 380 NBB CO2 BB Pistol has a typical double action trigger with a longer trigger pull that requires more length and effort to pull, but I would say is still usable as an action shooter. Your finger will get a bit tired after several magazines of action shooting. The Barra 380 trigger pull makes the internal metal barrel move forward and out of the front of the barrel opening enough to see it clearly, then when you reach the release point it snaps back into the BB Pistol acting like the hammer and releasing CO2 and shooting a BB.

Accuracy: I have yet to shoot the Barra 380 NBB CO2 BB Pistol or even performed my standard Field Test Shooting Video as of yet, so I can not comment at this time on the actual performance other than what is claimed in terms of fps - 410fps by the way. I have shot several similar CO2 BB Pistols which share almost the exact same internal components but have a different external skin on them. One benefit is that all this style of metal stick magazines are the same so they will be interchangeable. My previous experiences with similar BB Pistols is that they will get mid 400fps velocities and in general will shot around a 2 inch grouping or so. It is hard to say how close theBarra 380 NBB CO2 BB Pistol is going to shoot to the bullseye, as out of the box it may shoot a bit high or low or left or right. We will find out during my shooting test.

Build Quality: The Barra 380 NBB CO2 BB Pistol is a pretty much almost all plastic Airgun with only a few metal parts I can see on it. The trigger is metal along with the inner barrel and the area where the CO2 goes in. Because of the plastic build, it is rather light weight which can actually be good if you where to drop it on a hard surface as the mass is low resulting in less damage. Scratches will also be less noticeable on a plastic Airgun over a metal Airgun as the material on a plastic Airgun is all tan/black throughout the material rather than a painted surface that will show blemishes a lot more. The simplicity of the design means you should get a lot of use from the Barra 380 before encountering any issues.

Realism: The Barra 380 NBB CO2 BB Pistol is not a replica of an exact real steel gun in production but it does take after a compact Beretta when you look at the open barrel and similar trigger guard. There are few external mechanical working parts on the Barra 380 CO2 NBB BB Pistol other than the trigger, safety, magazine and inner barrel. The barrel is slightly recessed and the CO2 tab is hidden in the grip which helps in terms of it looking the part.

Pros:

  • Nice compact size BB pistol easy to transport.

  • Decent FPS rating of 410.

  • Should get lots of shots per CO2 as it is non-blowback

  • Picatinny rail on frame for adding accessories.

  • Does have a white dot sight up front.

  • Finger groves on pistol grips for a secure grip.

  • CO2 tab is well hidden within the grip.

  • Double action trigger pull is long but not too firm.

  • Uses a generic all metal stick magazines commonly found on lower cost BB pistols.

  • Simple design with not a lot of moving parts will make it reliable for a long time.

Cons:

  • All plastic gun for the most part.

  • Not many working parts, pretty much all moulded gun.

  • Grip can pop of kind of easy if you pull a bit hard.

  • Sights are non adjustable and no white dots on the rear sight.

Comments:

I often mention how I prefer blowback Airguns that have a more solid weight and feel to them with more working parts, but again there is a lot more that can go wrong and complex parts wear out over usage a lot quicker than a more simple design as in the the case of the Barra 380 NBB CO2 BB Pistol. Price is also going to be a lot less when looking a more simplified Air Pistol like the Barra 380, as the plastic build is a lot cheaper to produce over more expensive metals. Another bonus with non-blowback CO2 airguns is that they do tend to have a higher velocity with more shots per CO2 than a similar CO2 Blowback Pistol, so less expensive to shoot over time. It really depends what you are really looking for? A couple other strong points to mention about the Barra 380 NBB CO2 BB Pistol would be the compatibility with other similar styled CO2 BB pistol metal stick magazines and if you like the look of a Beretta then you may also like the look of the Barra 380.

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: Barra, 380, Barra 380

Crosman MK45 CO2 NBB BB Pistol Table Top Review

No Comments

Type: Non-blowback CO2 BB Pistol.
Manufacturer: Distributed by Crosman.
ModelMK45.
Materials: Mostly plastic.
Weight: .63 pounds (281 grams).
Total Length: 7.25 inches (184mm).
Barrel: 4.5 inches (114mm) metal non-rifled.
Propulsion: CO2 x 1.
Action: Semi auto non-blowback, DOA trigger.
Ammunition Type: .4.5mm steel BB’s.
Ammunition Capacity: 20 round drop out metal stick magazine.
FPS: Claimed 480.

Trigger Pull: The Crosman MK45 CO2 NBB BB Pistol has a typical double action tiger with a longer trigger pull that requires more length and effort to pull, but I would say is still usable as an action shooter. The Crosman MK45 trigger pull makes the internal metal barrel move forward and out of the front of the barrel opening a bit, then when you reach the release point it snaps back into the BB Pistol acting like the hammer and releasing CO2.

Accuracy: I have yet to shoot the Crosman MK45 CO2 NBB BB Pistol or performed my standard Field Test Shooting Video, so I can not comment at this time on the actual performance other than what is claimed in terms of fps. I have shot several similar CO2 BB Pistols which share almost the exact same internal components but have a different external skin on them. The good news is the metal stick magazines for all of these type NBB CO2 BB Pistols are the same so they will be interchangeable. My previous experiences with similar BB Pistols is that they will get mid 400fps velocities and in general will shot around a 2 inch grouping or so. It is hard to say how close the Crosman MK45 CO2 NBB BB Pistol is going to shoot to the bullseye, as out of the box it may shoot a bit high or low or left or right. We will find out during my shooting test.

Build Quality: The Crosman MK45 CO2 NBB BB Pistol is a pretty much an all plastic Airgun with only a few metal parts I can find on it. The trigger is metal along with the inner barrel and the area where the CO2 goes in. Because of the plastic build, it is rather light weight which can actually be good in a fall as the mass is low resulting in less damage if you were to drop it on a hard surface. Scratches will also be less noticeable on a plastic Airgun over a metal Airgun as the material on a plastic Airgun is all tan/black rather than a painted surface that will show blemishes a lot more. The simplicity of the design means you should get a lot of use from the Crosman MK45 CO2 NBB BB Pistol before encountering any issues.

Realism: The Crosman MK45 CO2 NBB BB Pistol is not a replica of an exact real steel gun in production but it does share a lot of cosmetic characteristics as what you would see on a Sig Sauer or even H&K Pistol. The magazine release on the Crosman MK45 looks and works a lot like what you will find on an H&K Pistol. There are few external mechanical working parts on the Crosman MK45 CO2 NBB BB Pistol other than the trigger, safety and inner barrel. The barrel is slightly recessed and the CO2 tab is hidden in the grip which helps in terms of believability.

Pros:

  • Desert tan with black grips looks really good in my opinion.

  • High FPS rating of 480.

  • Picatinny rail on frame for adding on accessories.

  • Non-blowback should get lots of shots per CO2.

  • Easy to see fiber optic sights front and back.

  • CO2 tab is nicely hidden inside the grip.

  • Double action trigger pull is long but not too firm.

  • Uses a generic all metal stick magazines commonly found on lower cost BB pistols.

  • Ambidextrous magazine release.

  • Simple design with not a lot of moving parts will make it reliable for a long time.

Cons:

  • All moulded plastic BB gun for the most part.

  • Not many working parts, it’s pretty much an all plastic BB gun.

  • Grips are fairly loose, they don't really snap into place.

  • Sights are not adjustable.

Comments:

I personally prefer blowback Airguns that have a more solid weight and feel to them with more working parts, but again there is a lot more that can go wrong and parts tend to complex parts wear out over usage a lot quicker than a more simple design like in the case of the Crosman MK45 CO2 NBB BB Pistol. Price is also going to be a lot less when looking a more simplified Air Pistol like the Crosman MK45, as the plastic build is a lot cheaper to produce. Another bonus with non-blowback CO2 airguns is that they do tend to have a much higher velocity and also generally you will also get more shots per CO2 than a similar CO2 Blowback Pistol. It really depends what features you want more and in this case you also get a more cost effective Air Pistol with plenty of shooting enjoyment. A couple other strong points to mention about the Crosman MK45 CO2 NBB BB Pistol would be the fiber optic sights front and back and its sharp l looking two tone layout.

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pistol, Review, Semi Auto, Vimeo Video Tags: Crosman, MK45

Crosman Triple Threat CO2 Dual Ammo Revolver Table Top Review

No Comments

Type: Pellet & BB Revolver
Manufacturer: Crosman.
Model: Triple Threat Dual Ammo.
Materials: Metal and Plastic.
Weight: 2 pounds (908 grams) APROX.
Barrel: 3/6/8 inches rifled.
Length: 9-13.75 inches.
Propulsion: CO2 x 1
Action: Revolver, single and double action trigger.
Ammunition Type: 4.5mm Steel BB's / .177 caliber Pellets.
Ammunition Capacity: 6-BB / 10-Pellet round rotary magazines.
FPS: 465-BB’s / 435-Pellets?

Trigger Pull: The trigger pull on the Crosman Triple Threat CO2 Dual Ammo Revolver like pretty much all of the 357 type Crosman Revolvers is rather nice in single action with virtually zero take-up and it has a not too light weight with a predictable feel to it. In double action it does get much longer and heavier but still very usable. If you have larger thicker finger then you may want to start off in single action as the finger opening is a bit tight.

Accuracy: I have not specifically tested out the Crosman Triple Threat so far but I would be very surprised if it was any different than the standard Crosman 357 and the Crosman Vigilante I have already done Field Test Reviews for. Other than the shape of the outer barrel, both of these guns are virtually the same including the frame and the 6 inch barrels. Back in 2012 when I tested out the Crosman 357 I averaged around 400 fps using mid grain lead pellets and was able to get a 1 to 1.5 inch multi-shot grouping at 30 feet away from my paper target. I will be making an update Field Test Shooting Video so we will see if I can replicate these results with the standard Crosman 357 and Vigilante CO2 Pellet and BB Revolver.

Build Quality: The CCrosman Triple Threat CO2 Dual Ammo Revolver is a fairly basic pistol that incorporates a variety of length plastic outer barrels and inner steel barrels (3/6/8 inches), the grips are also plastic as expected and so are the magazines and sights. Most everything else is metal including the receiver, trigger and hammer. This line of Crosman 357 pistols has been around for decades so you can expect hours of fun and reliable shooting with their multi-barrel dual ammo version.

Realism: There are for sure a lot more realistic looking Replica Revolvers out there with swing out cylinders that eject the shells just like their real steel counterparts, but where the Crosman Triple Threat shines is in performance, reliability and consistency. You will get more shots per CO2, higher fps and better accuracy with the Crosman Triple Threat CO2 Pellet and BB Revolver over other more realistic Revolvers on the market.

Pros:

  • Inexpensive Pellet revolver with a proven track record that goes back decades.

  • Good usage of metal parts where you need them most. (Metal  trigger, hammer, frame, barrel, CO2 Tab screw

  • Single and double action trigger for action and more focused shooting.

  • Excellent accuracy and good power with a reasonable amount of shots per CO2 (based on similar versions).

  • Fully adjustable rear sight.

  • Riffled steel barrels (All three of them).

  • 3 different barrel choices (3/6/8 inches) depending on the look and how compact you want it to be.

  • CO2 and tab are nicely hidden and use all metal.

  • Come with both a Pellet and BB magazines..

Cons:

  • Outer barrels are plastic but very solid. Metal would have added a bit more weigth perhaps better balance?

  • Grips and trigger pull length may be a bit long for smaller handed people when shooting in double action.

  • Not your most real revolver out there in terms of replicas out there but probably more usable then most.

  • No white dots on the sights.

Comments:
The Crosman Triple Threat CO2 Dual Ammo Revolver is basically another reskinned Crosman 357 at the end of the day with a ton of options including 3 different barrel lengths that will change the look, size and power depending on your needs. You also have the choice of what ammo you want to use, cheaper 4.5mm Steel BB’s or more accurate and even higher velocity lead pellets for greater downrange energy and precision. If you are not sure which Crosman 357 type revolver to get? The standard 357… the Vigilante or the Triple Threat, maybe go with the Triple Threat at the end of today as it offers the most options and variety of configurations.

Categories: 4.5mm / .177 cal, BB, CO2, Comparison, Pellet, Pistol, Review, Revolver, Vimeo Video Tags: Crosman, Crosman 357, 357, Colt Python 357

Sig Sauer MCX Rattler CO2 BB Rifle Table Top Review

No Comments

Type: BB Rifle.
Manufacturer: Sig Sauer ASP
Model: Sig Sauer MCX Rattler
Materials: Metal and Nylon Fiber build.
Weight: 4.6 Pounds (2.1 kg).
Barrel: 7 inch (17.8 cm) steel non-rifled.
Propulsion: Single 12 gram CO2.
Action: Semi auto and 3 round burst with internal blowback (single action only trigger).
Ammunition Type: 4.5mm Steel BB’s.
Ammunition Capacity: 30 rounds spring fed.
Velocity: Claimed of 325 fps.

Trigger Pull: The trigger pull on the Sig Sauer MCX Rattler CO2 BB Rifle is a single action only trigger that requires initial activation of the charging handle, after the first shot the internal blowback action will do this automatically for each followup shot. The single action only trigger is fairly short with a light pull and predictable release, great for action shooting. You also have the option of shooting in true semi auto (one trigger pull and one shot) or selecting 3 round burst mode which allows for one pull of the trigger with 3 rounds in full auto.

Accuracy: I really don’t have much feedback to give here as I have only shot a single magazine so far with the Sig Sauer MCX Rattler CO2 BB Rifle in a very uncontrolled format as I was not so much testing it out but rather just having some initial fun to see what it was all about. I will of course be following up this Table Top Review with a Field Test Review shortly to find out what the actual velocity is and see how accurate it is in both semi auto and 3 round burst mode.

Build Quality: The build quality for the Sig Sauer MCX Rattler CO2 BB Rifle is really good considering it is mostly all plastic on the outside. It does feel solid and well built when holding it in the hand. From what I can tell the metal parts would include the barrel, the charging handle, the main controls and also much of the internal components inside both the rifle and the magazine. I would have liked to have seen a metal flash hider and perhaps the pop-up Iron sights could have also been metal.

Realism: The Sig Sauer MCX Rattler CO2 BB Rifle is a 1 to 1 scale very realistic Replica of the real steel Sig Sauer Rattler normally chambered in 5.56 NATO. It would have been nice if the dust cover opened up when charging the Airgun for realism but most of the other controls work as expected, like the charging handle, selector switch, magazine release and I am not sure but maybe even the bolt release, I will know more when I make my Field Test Shooting video for the Sig Sauer MCX Rattler.

Pros:

  • Perfect size and weight for a fun BB semi / full auto shooter.

  • Fully adjustable pop up sights that are usable in both the down and up position,

  • Lots of accessory mounting options with the picatinny top rail and MLOCK in the sides and bottom.

  • Folding rear stock allows for a compact size and much easier transportation.

  • Ambidextrous selector switch.

  • Can shoot in both semi and 3 round burst modes.

  • Very solid AR15 type magazine that holds the 30 4.5mm steel BB’s and the single 12 gram CO2.

  • Reasonably priced at around $250 at the time of this video.

  • Sig Sauer licensing.

Cons:

  • Only uses a single CO2, two would have been better in a fast action shooter like this to maintain fps.

  • 325 fps seems a bit low.

  • Lots of plastic but build quality does feel good.

Comments:

The Sig Sig Sauer MCX Rattler CO2 BB Rifle reminds me a lot of the Umarex Steel Storm and Steel Force which are both Compact AR type Semi and Burt mode 4.5mm CO2 Blowback Airguns. Where the Sig Sauer MCX Rattler CO2 BB Rifle shines, is in the quality and realism as compared the Umarex counterparts. I do like that both the Umarex Steel Storm and Steel Force use dual 12 gram CO2 cartridges which I feel allows them to have more consistent velocity and performance as compared to the single CO2 in the Sig Sauer MCX Rattler CO2 BB Rifle. My First impressions without really testing the Sig Sauer MCX Rattler are all pretty positive but it will really come down to how well it performs and so I will put my recommendations on hold until I actually test it out!

My Table Top Review of the Sig Sauer MCX Rattler CO2 BB Rifle:

Categories: 4.5mm / .177 cal, BB, Blowback, CO2, Comparison, Review, Rifle, Semi Auto, Vimeo Video, Full Auto Tags: Sig Sauer, Sig MCX, MCX Rattler

EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol Table Top Review.

No Comments

Type: GBB Airsoft Pistol.
Manufacturer: Made by EMG.
Model: TTI JW4 2011 Pit Viper.
Materials: Aluminum & polymer components.
Weight: 2.26 pounds (1025 grams).
Length: 8.5 inches (2167mm).
Propulsion: CO2/Green gas.
Action: Semi auto blowback, single action only trigger.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 28-30 round drop out full size metal magazine.
FPS: Claimed 370-390.

Trigger Pull: The single action only trigger pull on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is really great, there is virtually zero take-up with a light, crisp and easy release. You can double tap with ease making the EMG TTI STI 2011 Combat Master a great action pistol. One of the shortest and smoothest 1911 triggers I have tested, similar to the EMG TTI JW3 Combat Master.

Accuracy: At this point I have not shot the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol so I have no idea what the actual real world fps is going to be and how accurate it proves itself so my comments for this part of the review will have to wait till I perform my Field Test Shooting Video coming up shortly. I do however expect it to perform very close to the EMG TTI STI 2011 Combat Master I already made a Field test Video Review for so you can check that on out in the mean time…

Build Quality: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is for the most part an all metal gun with a CNC Machined Aluminum Slide and aluminum barrel along with mostly metal parts throughout including much of the frame. Parts of the frame are polymer including the grip area and trigger guard. The fit and finish is awesome on the EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol with attention to detail everywhere.

Realism: The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is based off of the Pit Viper TTI, a replica of the John Wick pistol used in the John Wick 4 movie and is virtually the spitting image to it. You will find licensing and trademarks where you would find them on the real steel version. Of course all the mechanical parts work like the real version and the EMG TTI STI 2011 Combat Master can be fully field stripped allowing for quick and easy hop-up adjustments.

Pros:

  • Super crisp, light and short SAO trigger.

  • Fit and finish is excellent, very little slide wiggle.

  • extremely close replica of the Pit Viper 2011 pistol used in the John Wick 4 movie.

  • Rear sight is fully adjustable and sits very flush with the slide.

  • Fiber optic front sight helps with quick targets acquisition.

  • CNC machined Aluminum slide and barrel with polymer frame.

  • Flared magwell for easy quick magazine reloading.

  • Full size high capacity 30 round double stack metal magazine.

  • Ambidextrous thumb safeties.

  • Working grip safety as you would expect on a 1911 based gun.

  • Most Mechanical parts work just like a steel version and can be easily field stripped to access hop-up.

  • Nice snappy and fast blowback action, great for action shooting.

  • Licensing all over this gun true to the real steel version.

Cons:

  • Comes with the red tip but can be remove pretty easily.

  • Getting magazine but plate off is a bit tuff.

  • No white dot’s or fiber optics in the rear sight.

Comments:

The EMG TTI Pit Viper JW4 2011 GBB CO2 Airsoft Pistol is another great Replica of a John Wick pistol and has a less squared and smaller stature than the EMG Combat Master and a smoother overall look to it. What’s nice is that the magazines are interchangeable between the EMG TTI JW3 and JW4 versions so if you already have one then you will get additional magazine options, perhaps one in Green Gas and one in CO2. I like the slightly bulkier feel to the Combat Master but the Pit Viper is also a decent size, but again slightly more compact and less edges to get caught on your surroundings. Either way, both are awesome options if you are John Wick fan.

Categories: 6mm, Airsoft, Blowback, CO2, Comparison, GBB, Gas, Pistol, Review, Semi Auto, Vimeo Video Tags: EMG, Pit Viper, TTI, M1911

October 2023 Mystery Box

No Comments

I love making these Mystery Box Unboxing Videos as many of the items inside are actually real mysteries to me, some I may have an idea of but even these items are new to me so it’s fun to open them up and check them all out. In this October 2023 Mystery Box Video I checkout 9 items ranging from AEG Airsoft Rifles to Airsoft , BB and Pellet Pistols. There is even a new Steel BB product from Sig Sauer that is a compact rifle with a 3 round burst option when shooting.

Black Ops Diamondback M4 AEG Airsoft Rifle:

  • Manufacturer: Barra / Bear River

  • Gun Caliber: 6mm Airsoft

  • FPS: 350 - 400

  • Gun Material: Mostly metal

  • Power source: AEG

  • Body type: M4/M16

  • Magazine capacity: 300

Specna Arms SA-H22 AEG Airsoft Rifle:

  • Manufacturer: Spec Arms

  • Gun Caliber: 6mm Airsoft

  • FPS: 350 - 400

  • Gun Material: Mostly metal

  • Power source: AEG

  • Body type: M4/M16

  • Magazine capacity: 125x2

EMG TTI Licensed JW4 2011 Pit Viper Airsoft Pistol:

  • Manufacturer: EMG

  • Gun Caliber: 6mm Airsoft

  • FPS: 370-390

  • Gun Material: Metal & Polymer

  • Power source: CO2 / Blowback

  • Body type: 1911

  • Magazine capacity: 30

Bear River 380 NBB CO2 BB Pistol:

  • Manufacturer: Barra / Bear River

  • Gun Caliber: 4.5mm Steel BB

  • FPS: 410

  • Gun Material: Mostly Plastic

  • Power source: CO2 / NBB

  • Body type: Beretta

  • Magazine capacity: 20

Crosman 2240 CO2 .22 Caliber Pellet Pistol:

  • Manufacturer: Crosman

  • Gun Caliber: .22 Caliber Pellet

  • FPS: 460

  • Gun Material: Mostly Metal

  • Power source: CO2 / Bolt Action Single Shot

  • Body type: NA

  • Magazine capacity: 1

Crosman MK45 NBB CO2 BB Pistol:

  • Manufacturer: Crosman

  • Gun Caliber: 4.5mm Steel BB

  • FPS: 480

  • Gun Material: Mostly Plastic

  • Power source: CO2 / NBB

  • Body type: Sig Sauer?

  • Magazine capacity: 20

Crosman .357 Triple Threat CO2 BB/Pellet Revolver:

  • Manufacturer: Crosman

  • Gun Caliber: 4.5mm Steel BB / .177 Caliber Pellets

  • FPS: 465

  • Gun Material: Plastic & Metal

  • Power source: CO2 / Revolver

  • Body type: 357 Magnum

  • Magazine capacity: 10

Bear River BR45 NBB CO2 BB Pistol:

  • Manufacturer: Crossman

  • Gun Caliber: 4.5mm Steel BB

  • FPS: 410

  • Gun Material: Mostly Plastic

  • Power source: CO2 / NBB

  • Body type: Sig Sauer?

  • Magazine capacity: 20

Sig Sauer MCX Rattler CO2 BB Rifle:

  • Manufacturer: Sig Sauer

  • Gun Caliber: 4.5mm Steel BB

  • FPS: 300

  • Gun Material: Mostly Plastic

  • Power source: CO2 / Blowback

  • Body type: Sig Sauer MCX Rattler

  • Magazine capacity: 30

Categories: .22 cal, 4.5mm / .177 cal, 6mm, AEG, Airsoft, BB, Blowback, CO2, Full Auto, GBB, Pellet, Pistol, Review, Revolver, Rifle, Semi Auto, Single Shot, Vimeo Video Tags: Crosman, Bear River, Barra, Specna Arms, EMG, Sig Sauer, Sig MCX, 2240, MCX Rattler, BR45, 357, Triple Threat, MK45, 380, Pit Viper, SA-H22, Black Ops, Diamondback

S&T Matrix KAR98K Bolt Action Airsoft Rifle Feld Test Review

No Comments

I don’t get to test out Bolt Action Airsoft Sniper type Rifles all that often but I do enjoy them for sure. I would like to test out the S&T Matrix KAR98K Bolt Action Airsoft Rifle using longer ranges than I can here in the Replica Airguns Indoor Sea Can Shooting Range but hopefully this Filed Test Review gives you an idea of what this Spring powered Bolt Action Airsoft Rifle can do. Make sure to watch my Table Top Review for the S&T Matrix KAR98K Bolt Action Airsoft Rifle for details, specifications and closer up video. In this video I mainly test out the velocity and accuracy at 30 feet away to see what the actual fps is and how tight of a 10 shot grouping I can get on a paper target.

Starting with the velocity test, I generally put 5 rounds through my Chronograph and then average them out for a real world rating. In this test I used standard .20 gram Airsoft BB’s for both the velocity and accuracy components of the video. I was very impressed with the consistency of the velocity with the slowest shot hitting 362 fps and the fastest shot hitting 363 fps averaging 362.5 fps and only having a 1 fps maximum difference between all shots. Pretty good right? Consistent velocity is very important for any sniper type rifle as if there is a large spread in velocity this can reduce elevation accuracy down range.

In terms of accuracy I was again very impressed with my results. For my target test I setup a fresh paper target 30 feet away and proceeded to shoot 10 rounds into it. I did have to reset for each shot as I had to manually work the bolt after each shot, this can affect accuracy but it did not seem to all that much. I was using a seated position in the back with my hands rested on a sand bag up front which does hep settle things down. Even with having to reset between each shot, I still managed to get close to a 1 inch 10 shot grouping, one shot did shoot just a bit high but that was probably me pulling it a bit. Out of the box with no sight adjustments the S&T Matrix KAR98K Bolt Action Airsoft Rifle shot almost dead center in the bullseye, it is fairly easy to adjust the elevation using the rear sight but there is no easy way to adjust for windage using the built in iron sights.

I know this is a Field Test Shooting Video and so it’s not really all about build or quality. That said I do love the quality and attention to detail the S&T Matrix KAR98K Bolt Action Airsoft Rifle has and the fact that it performs really well too is a big bonus. One last point I did not even mention in the Field Test Video is that Was able to load a lot more than 11 rounds into the magazine. I stoped at 19 as the spring was getting on the tight side, but may have been able to load more? If you’re looking for a sniper rifle with a history and that will stand out in a game then take a look at the S&T Matrix KAR98K Bolt Action Airsoft Rifle as an option.

Categories: 6mm, Airsoft, Field Test, Repeater, Review, Rifle, Spring Piston, Vimeo Video Tags: S&T, KAR98K