Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle Table Top Review

No Comments

Type: Airsoft Sniper Rifle
Manufacturer: Tokyo Marui.
Model: VSR-10 Pro
Materials: ABS and Metal.
Weight: 4.6 pounds (2090 grams).
Total Length: 42.3 inches (107.5 cm)
Barrel: 17 inches (43 cm), metal non-rifled.
Propulsion: Spring.
Action: Bolt.
Ammunition Type: 6mm Airsoft BB's.
Ammunition Capacity: 30 round magazine.
FPS: 366.

Trigger Pull: The trigger pull on Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is nice and short and light as would be expected form a bolt action sniper rifle. The take-up and release are virtually on existent, just nudge your finger a bit and this Airsoft rifle is firing a round down range.

Accuracy: So far I have not tested out the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle but from what I have seen watching other YouTube videos, it looks to be very accurate right out of the box. The version I have has the Canada import legal heavier spring so it should shout right around 366 fps or a tad higher using .20 gram Airsoft BB’s. I will probably test mine out using heavier Airsoft BB’s when I perform my Field Test Shooting Video for the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle.

Build Quality: The Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle like all Tokyo Marui products is very well made, there is a lot of plastic in this Airsoft Sniper rifle but it is of good quality, you will find metal in the barrel and bolt areas of course. The trigger, safety and sling attachments are also metal.

Realism: The Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is based off of your typical bolt action hunting rifle with not a lot fo bells and whistles other than the included adjustable open sights but you can pimp it out with a ton of aftermarket modifications including much suppresses, scope mounts for a scope, bipods and pretty much all the internal parts can be upgraded and swapped out.

Pros:

  • Not a clone so all aftermarket parts will work on and in it.

  • No CO2 or batteries required, ready when you are.

  • Expect excellent accuracy at most ranges.

  • Easy to adjust on the field Hop-up.

  • Super easy to operate bolt action and very nice trigger.

  • Comes with heavier spring installed so more powerful than standard version.

  • Comes with integrated fully adjustable sights, no need for a scope to start shooting.

  • Comes with sling mounts which make it Bipod compatible.

  • No red tip.

Cons:

  • Does not come with scope plate so you will need that if you plan to install a stope on it.

  • Front sight is taped on with double sided tape.

  • Cost is high compared to other Spring powered Airsoft rifles on the market..

Comments:

There are lots of clones out there of the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle but this is the real deal and so you will pay more for it for sure but you will get Tokyo Marui quality and performance. That can not be said for the clone versions. If you do plan on upgrading yours down the road the Tokyo Marui version will accept all the aftermarket add ons and parts which again the clones may not and so you could end up wasting your money on parts that don’t fit with the other versions. Something to keep in mind when adding up all the costs. One thing to be aware of with the Tokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle is the bolt is a bit firmer with the upgraded spring dn so you need to make sure it is all the way forward before twisting and releasing. If you don’t it will not lock into place and you will end up scratching the back paint off of the area just in front of the safety, not a big deal, you can always touch it up easy enough.

My Vimeo Table Top Review for theTokyo Marui VSR-10 Pro Sniper Spring Bolt Action Airsoft Rifle:

6mm, Airsoft, Review, Rifle, Single Shot Tokyo Marui, VSR-10 Pro