Yet another Indoor Field Test Shooting Video performed in the Replica Airguns Sea Can Airgun Shooting Range. Today I put the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle through its paces and it came out a winner for sure! I really like the way this AR15 type AEG Airsoft Rifle looks and feels and was hoping to get a good result today, I was not disappointed! I have not yet made my Table Top Video for the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle but plan for this next week, you can watch my Preview Video for some details and specifications in the mean time…
As I always do, I first tested out the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle by shooting several rounds through my Chronograph to see what the actual velocity is in fps. I used .20 gram Airsoft BB’s for this test and was able to get a 6 shot average of 408 fps so perfect for most shooting situations as this is not too hot or too cold. My slowest shot was 402 fps while the fastest shot was 410 so pretty consistent for sure.
Next I placed a fresh paper target 30 feet down range on my ammo trap and proceeded to shoot around 10 rounds into it using a rested seated shooting position with a sand bag up front to help with stability. The first shot out of the barrel felt and sounded like a double shot and this one did strike the target just a tad low so I left that one out of the test results. All the other Airsoft BB’s shot easily within 1.5 inches maybe even a bit tighter and all where well centered left to right but just a bit low on the target most likely because I was using a red dot with a riser that places the sights fairly high. Since the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle can also shoot in full auto I had to give it a try and pretty much emptied the magazine until the target actually fell off the ammo trap. The full auto grouping did open up just a slight bit as expected but only marginally.
I really like the Sig Sauer Proforce MCX Virtus AEG Airsoft Rifle, yes it’s an AR15 at it’s core but Sig has made it their own in terms of looks and styling. The performance was also excellent so this gun is not just for show. You will need a sighting system of some sort when you buy it so keep that in mind. I suggest a red dot of some sort but you could add on iron sights if you like more traditional sights.
In this Preview Unboxing Video I take a look at three rifles, two are Airsoft Rifles and one is an Archery Rifle. Then First Airsoft Rifle form Tokyo Marui i s full Gas Blowback all metal build AR 15 of the highest quality and realism while the second Airsoft Rifle from Sig Sauer is an AEG but again a high quality product for sure. Lastly I take a look at Umarex’s lates Airsaber which now sports dual Arrow configuration for quick follow up shots. I do plan to make future more intensive table top and shooting videos for some if not all of thees Rifles but this video will at least wet your appetite a bit.
In this Replica Airguns Field Test Shooting Video I test out the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle to see what the actual velocity is and what kind of accuracy we can expect shooting 30 feet down range into a paper target, I shoot in both semi auto (10 rounds) and then Full auto (A bunch of rounds) to see how this will asl effect the accuracy.
Make sure to also watch my Table Top Video Review for the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft to find out more about it’s specifications and features along with some nice close up video of it.
Starting off with the velocity portion of this Field Test Shooting Video, I placed 6 rounds through my Chronograph using .20 gram Airsoft BB’s and averaged 384 fps. The slowest shot was 380 fps while the fastest shot was 390, so only a 10 fps spread! This is a nice velocity as it’s not too hot for indoor skirmishes or too slow for further out shooting outside.
Next I setup a fresh paper target 30 feet down range and proceeded to test out the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle in both semi auto and full auto to see what kind of grouping I could expect. I did not sight in the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle as I like to see how they perform right out of the box. I did notice I was shooting a little bit high and just slightly to the left. Elevation adjustment can be easily adjusted using either the front post sight, the rear notch sight or even a little bit with hop-up so this is not a problem. There is however no way I could see to adjust windage so any corrections you may need ot make left to right you will have to do using your aim point. That said I was able to get around a 1.5 inch grouping with 10 rounds in semi auto mode.
Switching things up to Full auto so fun mode I proceeded to place a whole bunch of rounds into the target, I will estimate around 75 or so and the grouping only spread out to about 2 inches so semi or full auto you will get great accuracy with the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle! The rate of fire using an 8.4 volt battery is not super fast but the cycle rate on a real steel AK47 is also not super fast but if you want to speed it up and also have a more responsive trigger then I would suggest using a higher voltage LiPo battery.
I was very impressed overall with the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle as it is a relatively inexpensive Airsoft Rifle with lots of included bonuses like two magazines, a battery and charger. Even with the low price and bundled add ons it performed really well for me. SO if you are looking for an AK type Airsoft Rifle I would suggest you take a look at the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle as an option for sure!
Type: Airsoft AEG. Distributer:Cybergun Model:Kalashnikov AK47 Tactical 60th Anniversary. Materials: Metal and polymer build. Weight: 6.82 pounds (3100 grams). Barrel: 457mm (18 inches) Total Length: 709-950mm (27.9-37.4 inches). Propulsion: AEG. Action: Semi, full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 550 rounds. FPS: 400.
Trigger Pull: The trigger pull on the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle is what you will find on most electric switch controlled AEG Airsoft Guns. It has a short to mid length very light take-up with a light release which generally has a bit of a delay as the motor pulls the spring back and release the piston. This delay is shorter with higher voltage batteries as the motor will run quicker allowing for a shorter delay and also a higher rate of fire in full auto mode.
Accuracy: I have not performed my Field Test Shooting Video for the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle but plan to get to that video this week. I really have no idea what to expect at this point since i have not even loaded up a magazine so we will find out together when I get to my Indoor Field Test Shooting video in a couple of days.
Build Quality: Overall the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle seems fairly well built. You will find metal parts in the barrel, front and back sights, receiver, charging bolt, bolt cover, rings, trigger and trigger guard. The plastic components would be the folding stock, magazine, RIS hand-guard, fore-grip and pistol grip. Fit and finish seem good and the overall weight is heavy but not too heavy. Internally you get a metal gear box with metal gears so you should expect to have a reliable and long lasting shooting experience with this Airsoft Rifle.
Realism: The Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle for sure looks the part of a more modern tactical AK47 with the majority of the mechanical parts functioning like a real steel version as in the charging bolt, bolt cover, sector switch, foldable rear stock and of course the magazine release.
Pros:
Mostly metal construction with good overall weight and feel.
Lots of rail attachment options on RIS rail hand-guard.
Adjustable sights, smaller increments on front, easy quick adjustment for elevation at distance on the back.
Comes with a folding fore-grip.
Rear folding stock helps to shorten up the rifle in transport or for storage.
Comes with two high capacity magazines.
Comes with a battery and charger.
Comes with sling mounts and a basic sling.
Super easy access to change out the battery.
Easy access to hop-up via charging bolt.
FPS should be nice and high, good for long or mid range shooting.
Cybergun Kalashnikov licensed, also 60th Anniversary edition.
Orange tip should be easy enough to remove.
Price point is fairly good for all that you get.
Cons:
No simulated blowback action.
Sights are only adjustable for elevation.
Magazines are plastic, feel a bit cheap and light.
Comments: The Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle is what I would consider a great value AEG Airsoft Rifle and there are not as many AK style Airsoft Rifles to choose from as there are AR’s so it’s nice to see this one in the lineup. You do get a lot for what you are paying, lots of metal parts externally and internally with a hefty almost 7 pound weight to it. I also like that you get everything you need to get going other than the Airsoft BB’s, so you get the battery and charger along with two 500+ magazines, they even add in a cheap sling just in case you want to throw it over your shoulder!
My Vimeo Table Top Review Videos for the Cybergun Kalashnikov AK47 Tactical Folding Stock AEG Airsoft Rifle:
Took me a while to get to this Field Test Shooting Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but glad I took a look at it even if it is over 6 years already on the market. As per usual I test out the velocity shooting several ordains through my Chronograph to see what the real world fps is, I then follow this up with an accuracy test shooting 10 rounds on a paper target setup 30 feet downrange to see how tight of a grouping I can get. Also make sure to watch my Table Top Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun for information on the specifications and features along with some nice close up video.
Starting with my Velocity Test I placed 6 rounds through my Chronograph using .20 gram Airsoft BB’s clocking in an average of 421 fps. I was very impressed with the consistency of the velocity with the lowest shot being 420 fps and the fastest shot being 422 fps only 2 fps apart! You can change out the spring super easy on the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but I feel that the fps out fo the box would be good for most Airsoft games indoor and outdoor.
I then places a brand new paper target 30 feet downrange and proceeded to shoot 10 rounds at it in semi auto using a seated shooting position rested on a sand bag up front. I was able to get very close to a 1 inch grouping just a tad over an inch. I did not sight in the gun so I was not surprised I was shooting rather low and just a hair to the left, this could be equally corrected by adjusting the rear sight for windage and elevation. I could also play around with the hop-up effecting elevation at different ranges. I then proceeded to shoot take some more shot in both 3 round burst adn full auto modes and as expected the groupings did spread out a bit but not a lot.
I was super impressed with eh performance of the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun, I don’t think I have seen velocity consistency this good in any other AEG Airsoft gun I have tested so far. Accuracy was also on point even using lighter plastic .20 gram Airsoft BB’s. My only real grip with the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is the limited battery choice since the internal storage ares is very constricted. Other than that this Airsfot Gun is a winner and worth taking a look at if you can get your hands on one.
Type: Airsoft AEG. Distributer:ASG. Model: CZ Scorpion EVO 3 A1. Materials: Metal and polymer build. Weight: 5.3 pounds (2400 grams). Barrel: 208mm (8.2 inches) Total Length: 425-623mm (16.7-24.5 inches). Propulsion: AEG. Action: Semi, burst, full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: 75 rounds. FPS: 395.
Trigger Pull: The trigger pull on the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is essentially just an on off electric switch controlled by the ECU. There is very little trigger resistance and the take up is very short allowing for quick semi auto shooting but if you like you can easily select three round burst or full auto shooting for more intense situations.
Accuracy: I have not performed my Field Test Shooting Video for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun but plan to get to that video next week. I really have no idea what to expect at this point since i have not even loaded up a magazine and taken it for a spin yet. I am sure I will not be dissapoitned as this is a very high quality Airsoft Gun with great internals.
Build Quality: I remember at SHOT Show back when ASG introduced the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun, I was told indirectly that the construction was nearly identical to the real steel CZ Scorpion EVO at least cosmetically as all the internal parts will be specificities to Airsoft. That said this is a very high quality build with the material being for the most part the same as the original with Nylon Fiber PA6 Polymer reenforced plastics and even some CNC machined metal parts as in the outer barrel, flash hidden, barrel nut and even the gear box.
Realism: The ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun is a bang on replica in terms of emulating the real steel CZ Scorpion EVO and has our weight and feel including a blot catch that locks back when out of ammo and most working components being ambidextrous.
Pros:
Build quality is almost exactly like the real steel version, super high quality materials.
Three shooting modes: semi auto, burst mode and full auto.
Decent mid capacity 75 round magazine with auto empty detection which locks the bolt catch.
Quad rail for lots of add on accessories.
Folding and adjustable stock that can also be removed.
Adjustable and removable iron sights with fiber optic up front and peep in the back.
Working charging handle for easy access to hop-up
Working bolt catch.
High quality electronic and gear box.
Ambidextrous controls for the most part.
Scorpion licensed through ASG.
Orange tip is fairly discreet.
Cons:
Battery compartment is small and hard for quick battery replacement, I recommend using an external setup if possible.
Price point is on the higher side but you get what you pay for.
Comments: On paper and just by looking over and inspecting the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun specs out and I am sure I will be pleased when I test it out in the Replica Airguns Indoor Shooting Range. That said this hasn’t happened yet so I will leave my final thumbs up until then. I do wish we had them in stock at the time of this video but there are a lot of other great ASG products in our store and of course many more brands of AEG Airsoft Guns. Hopefully we can get something like this in shortly for everyone so keep checking with us.
My Vimeo Table Top Review Videos for the ASG CZ Scorpion EVO 3 A1 6mm AEG Airsoft Gun:
Wow, an accessory review, not many of these :) Today I take a look at the Amomax Airsoft Airgun Holster product line since at some point you may want to put your gun in a holster or practice drawing your gun from a holster?
The good news is we just got in a decent amount of product for our Amomax Airsoft Airgun Holsters. Here is a bit of info about Amomax but of course make sure to watch the video as I take a good look at a few of the versions we sell in our Canada and US online Replica Airguns Stores.
Amomax holsters are compatible with 4 different carrying platforms :paddle (standard), belt clip, MOLLE, and drop leg platforms. All the carrying platforms can be replaced by only one screw. Users can carry them in daily use, outdoor sports, normal shooting training and competition. Holster will stay firmly on a belt, leg and MOLLE system even in fast moving situations with a quick release Retention System button that keeps the gun locked in place until you are ready to draw. Holster body and carrying platform are connected with a tooth gear that allows for 360 degrees of rotation. User can easily adjust the carrying position to fit their needs.
Amomax Holsters are currently available in the following versions:
I will say right off the bat this Field Test Shooting Video for the Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter did not go as well as I would have wanted it to! The HPA tank itself worked really well but I believe the adapter was faulty as it was destroying the seals on my tank and not regulating very well.
I still wanted to publish this video regardless as not all reviews go as planned, some fail horribly but I would rather be honest and transparent about it rather than have you believe every product is a perfect.
There will always be problems even with really great products there can be defects. I plan to get a new adaptor and try this Field Test Review Video again but for now you can have some fun watching me at least have some success using the Air Venturi 3000 PSI Aluminum HPA Tank with Stock on my Rap4 Rap5 MP5.
You can also watch my Table Top Review Video for more details and info on this product!
I will also be following up my Table Top video with a Field Test Shooting Video to see what possible advantages and disadvantages the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank has in a real world test of its performance, hopefully all advantages!
Pros:
Compact and is the perfect size to use as a rear buttstock for various 88 Gram and or HPA rifles.
Smaller tank means if you are using a foot pump it won’t take all day to fill up :)
Comes with adapter so can be used with regular HPA and 88 Gram CO2 systems.
Regulated to 1100 psi so should perform better in terms of max velocity and consistency compared to CO2 which is around max 800-900 psi with velocity being effected by cool down.
Not effected by colder temperatures compared to CO2.
Once you have this tank the cost is virtually nothing to shoot compared to expensive 88 Gram CO2 cartages. You just need to buy your pellets or BB’s.
Cons:
Still takes a while to pump up using a foot pump system.
Higher initial cost ($195) than simply buying 88 gram CO2 cartages when you need them.
Will need access to a pump or compressor to use it.
Doesn’t look as good as the supplied buttstock at least with the Sig Sauer MCX and MPX.
Comments:
I guess the question is who is this for? If you are a casual shooter that perhaps owns the Sig MPX or MCX or even another 88 Gram CO2 Air Rifle that the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank would work with then this may be a bit expensive especially if you don’t have a way to pressurizer the tank at home. On the other hand if you already have a foot pump or air compressor or easy access to one and maybe you have other HPA or CO2 based airguns this tank will work with then it’s kind a no brainer to get it. Maybe you juts want a system that gives you maximum and consistent velocity no matter how cold it is outside. All good reasons to get one in my books.
In this Update Preview Unboxing Video I take a look at 5 products that came across my table and that I have not reviewed so far on the Replica Airguns YouTube channel.
First I show off an HPA tank from Air Venturi that works perfectly for the Sig Sauer MPX and MCX Pellet Rifles allowing for more consistent fps and I would image a higher overall fps? We will find out when I test it out in the replica Airguns Indoor Sea Can Airgun Range.
13 Oz Aluminum
10 Inches Long
2 Inches Diameter
Integrated Pressure Gauge
Includes Buttstock
CO2 Adaptor Included
3000 PSI Fill
1100 PSI Regulated
Next I take a look at the KJWorks M9A1 GBB Airsoft Pistol, I hover revived the CO2 version before but this version comes with the Gas magazine rather than the CO2 mag for those that prefer gas operated Blowback Airsoft Pistols. Because of the slightly lower FPS the Gas version comes with a barrel extension to make it Canada import friendly.
6mm Airsoft BB’s
Green Gas / Propane
370 fps
25 Round Magazine
2 Pounds
Probably one of the most interesting product I look at in this video at least for me is the EMG JW3 Combat Master GBB Airsoft Pistol. This Airsoft pistol is mainly aluminum with some polymer based off of the 2011 STI and was featured in the 2019 John Wick 3 Film. I’m really looking forward to testing this one out in the Sea Can Replica Airguns Airgun Range!
6mm Airsoft BB’s
Green Gas / Propane
9.4 Inches
366 fps
28 Round Magazine
2.4 Pounds
Moving along to another Air Pistol I finally get my hands on the Crosman P1 which is really just a KWC PT92 4.5mm Blowback CO2 BB Pistol but with Crosman Branding and an included laser. Since I have never shot a PT92 BB Pistol with a laser I will probably make a Field Test Shooting Video to see how well it performs.
4.5 mm Steel BB’s
CO2 x 1
4.2 Inch Barrel
330 fps
19 Round Magazine
2.4 Pounds
Comes with Laser Sight
Last up I take a look at the ASG TAC-6 which is pretty much the exact same ASG TAC-4.5 CO2 Air Rifle I tested a while back but in this case the 6 refers to it being a 6mm Airsoft Rifle rather than a 4.5mm Steel BB Riffle. I am not sure I will do a full Table Top Video since these guns are virtually identical but just in different Ammo types but I hope to get outside and see how well it performs shooting at a bit more distance than the 30 foot indoor range I usually test my Airgun in.
I thought when I read the one mag instruction guide that I had a good idea on how to use it but there was one area I misunderstood. I thought I needed to pull the tab in and out several times to reload the magazine but in fact I only needed to pull it out once, then shale the magazine back and forth horizontally a few times and then I was good to go.
I also read some other comments that mentioned I didn’t have to take the magazine out every time I reloaded so in this video I test that out to make sure and then one last comment that rather than pulling the charging handle back each time I reloaded I could simply press the bolt release on the right side of the Airgun, and yes this is the case with the Crosman Full Auto rile series.
So here I go a second time in making sure I do it right this time!
I have been wanting to test out the Crosman Full Auto Quick Reload Magazine for a while now and finally got around to it. The weather was cooperating with me so I went outside for this one and setup a bunch of cameras to make the many many magazine reloads a bit more interesting for my viewers.
The Crosman Full Auto Quick Reload Magazine has a hopper that is said to hold around 300 4.5mm Steel BB’s which I can attest it does in fact hold at least 300 BB’s. The Crosman Full Auto Quick Reload Magazine like their regular Crosman Full Auto Magazines holds two 12 gram CO2 Cartridges, so the question is, will I be able to get through most of the 300 BB’s without reloading the CO2?
Watch my struggle a bit to figure out the exactly how to properly use the Crosman Full Auto Quick Reload Magazine and then quickly eat through 300 or so BB’s blasting pop cans down range!
In this Field Test Shooting Video I perform my usual Chronograph and Accuracy tests in the Replica Airguns Indoor Sea Can Shooting Range to find out what the actual feet per second velocity is and how accurate the ICS CPX-APE SF1 AEG Airsoft Rifle is in both semi auto and full auto. Watch my Table Top Video if you are looking for more info on Specifications and Details along with a full tear down of the ICS CPX-APE SF1 AEG Airsoft Rifle.
First up I place 6 rounds through my Chronograph to see what the real world velocity is and the ICS CPX-APE SF1 AEG Airsoft Rifle was able to average 391 fps using .25 gram plastic Airsoft BB’s. ICS claims the ICS CPX-APE SF1 is capable of fps up to 460 fps but this would be using lighter .20 gram Airsoft BB’s which I believe is entirely possible!
Next I put a fresh paper target on my metal backstop 30 feet downrange and proceeded to shoot 10 round in semi auto to see how tight of a grouping I could get. I was happy to see that 7 of my 10 rounds all grouped nicely within the 1.5 inch bullseye and only 3 came out just slightly increasing the grouping to around 2 inches but still closer to 1.5 inches. When I switched over to full auto and emptied the 300 round magazine into the target, amazingly the grouping still seemed to stay pretty close to 2 inches in diameter with some stragglers. The ICS CPX-APE SF1 AEG Airsoft Rifle punched a satisfying hole in my target going through several layers of cardboard.
As you can see in this YouTube Field Test Shooting Video the ICS CPX-APE SF1 AEG Airsoft Rifle performed very well for me living up to its pristine price point. You will pay top dollar for the ICS CPX-APE SF1 AEG Airsoft Rifle but will also get top quality with a ton fo features including an almost all metal/aluminum build, ambidextrous controls throughout, tons of add on capabilities using the 5 sided Keymod hand-gurd, fully adjustable folding stock and exceptional performance.
Type: AEG EBB Airsoft. Manufacturer: ICS Model: CPX-APE SF1 Materials: Mostly Metal/Aluminum. Weight: 6.4 pounds (2900 grams). Length: 25.2 inches folded / 32.5-36.2 unfolded. Hop-up: Yes adjustable. Propulsion: AEG EBB (Electric Blowback). Action: Semi & Full Auto single action only electric trigger. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 300 rounds. FPS: 460 fps.
Trigger Pull: The trigger pull on the ICS CPX-APE SF1 AEG Airsoft Rifle is pretty much like most AEG Electric trigger operated Airsoft Rifles. Usually mid range, light and with no real noticeable release point since it is an electric on and on switch at the end of the day and not really mechanical. Of course you can elect between semi and full auto operation at will.
Accuracy: I have not done my actual Field Test Shooting video review for the ICS CPX-APE SF1 AEG Airsoft Rifle but plan to tackle this video next on my list so this week for sure, stay posted of this one as I have not Field Tested any ICS Airsoft Rifles to date and really don’t know what to expect!
Build Quality: The G&G ICS CPX-APE SF1 AEG Airsoft Rifle is extremely well made as the price tag would suggest. You are going to find metal almost everywhere on this product including the all aluminum upper receiver. The only plastic I could find on the ICS CPX-APE SF1 AEG Airsoft Rifle was in the magazine and the folding butt stock. Everything else is metal/aluminum including the upper and lowe receivers, the sights, the rails and all of the controls. Fit and finish feels great as-well!
Realism: The ICS CPX-APE SF1 AEG Airsoft Rifle is not a replica so to speak of any one particular gun in production but does have some AR and perhaps SCAR attributes to it. Perhaps there needs to be a real steel version of this gun as it does combine a bit of the best of a both platforms. The ICS CPX-APE SF1 AEG Airsoft Rifle is sold for sure with great weigth and feel to it being that it is mostly metal. All the controls work exactly like you would expect on a the real powder burner and you can totally take this Airsoft rifle apart in just a minute or two with virtually no tools.
Mostly metal construction with full aluminum upper receiver.
Tons of rail attachment options with the 5 sided Keymod rail hand-guard.
Fully adjustable pop-up iron sights.
Most everything is ambidextrous: Selector switch, Magazine release, Charging handle, Sling mount.
Rear folding stock has tons of positions, 6 in length and 5 for cheek rest.
Super easy access to everything, hop-up, gear box, inner barrel, outer barrel.
Electric blowback system for slight recoil effect.
T-window in magazine for quick ammunition checks.
FPS is nice and high, great for longer range shooting.
Cons:
On the expensive side but very high quality.
Limited battery options as space for a battery is tight.
May have a bit too high of fps for closer quarter indoor Airsoft games.
Comments:
The ICS CPX-APE SF1 AEG Airsoft Rifle is not an inexpensive product and may be a bit out of touch for Airsofters on a tighter budget. That said it is really well thought out and well built Airsoft product that is ready to go with no real upgrading required. You may want to show on an optical or red dot sigh, perhaps a tac light or fore grip? Nothing you need right away. There really isn’t one thing I can point out that makes this gun so great, it is a combination of everything. when it comes down to it the ICS CPX-APE SF1 AEG Airsoft Rifle kind of has it all going for it. I am looking forward to seeing just how well it performs during my Indoor Field Test. I have high hopes!
I am super excite to showcase three awesome rifles in this Update Preview Unboxing Video. Two of which are Airsoft and one is a Steel BB shooter, all of which are semi and full auto selectable. In this video I do a bit of an unboxing and preview of each Rifle not going into too much detail as I want to leave most of the information for my Table Top and Filed Test Videos. The main purpose of this video is to let everyone know we have these Rifles in our Canada Replica Airguns Store now for sale.
I may as well talk about them in the order they appear in my video so lets start with the ICS CXP APE AEG Airsoft Rifle. The ICS CXP APE AEG Airsoft Rifle is a mostly metal Electric Airsoft Rifle with realistic electronic blowback operation along with a CNC machined aluminum upper and lower receiver. It comes with a hi-cap 300 round magazine and a Ver 2 Full Metal ICS Split Type Gearbox. The ICS CXP APE AEG Airsoft Rifle weighs in at just under 3kg.
Next I showcase the G&G SMC9 GBB Airsoft Carbine, a unique product that converts the G&G GTP9 pistol into a a semi and full auto Carbine and includes a 50 round extended magazine, there is an even higher capacity drum magazine made for this product! You will find a fold out stock along with a CNC Machined MLOK Rail for additional mounting options.
Last but perhaps one that I have been the most eagerly anticipating is the Crosman AK1 CO2 Blowback BB Rifle a twin CO2 Blowback 4.5mm Semi and Full auto AK style BB Rifle, finally a decent AK BB Rifle! The Crosman AK1 CO2 Blowback BB Rifle has a claimed fps of 430 and shoots 1400 rounds per minute in full auto, very similar to the Crosman DPMS series of AR styled CO2 Blowback Full Auto BB Rifles. The Crosman AK1 CO2 Blowback BB Rifle comes with a 25 round magazine and swing out rear adjustable stock.
In this Field Test Shooting Video I test out the Velocity and Accuracy of the Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle by first placing 5 rounds through my Chronograph and recording the feet per second for each shot and then averaging them out. For the second portion of my Indoor Shooting Performance Test I setup a paper target 30 feet down range followed by shoot 10 rounds back to back to see what the spread or grouping size is. I followed this up with a nice long full auto burst just for fun to see if the grouping still remains nice and tight.
For my Velocity test I used .25 grain Plastic Airsoft BB’s rather than the normally tested .20 in the claimed fps of over 366 fps so I was expecting to get a little bit lower velocity results. I did manage to average right around 304 fps with all shots fairly consistently with the slowest being 302 fps and the fastest hitting 305 fps.
I then setup my brand new paper target and using a rested and seated shooting position from 30 feet back I placed my first 10 rounds into the target. The Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle did shoot a little bit low close to the bottom of the rings but not as low as when I tested the Heckler & Koch HK416C version, I am sure some hop-up adjustment will get this closer to the mark. I did mange to get a really tight 10 round grouping of close to half an inch with most of the BB’s hitting one o top of the other I would ahed to say this is the best 30 foot accuracy results I have gotten from any Airsoft rifle to date! Full auto was as predicted, lots of fun with a nice hole in the paper/cardboard leaving about a 2 inch opening.
The Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle performed really well for me and as already mentioned is crazy accurate. It had a slightly lower fps than the Heckler & Koch HK416C version which was a bit of a surprise but at 304 fps using .25 gram Airsoft BB’s this is about perfect for close quarters shooting adn even out to medium distances. Make sure not checkout all of our Umarex VFC Heckler & Koch over in the Replica Airguns Canada Online Store.
In this Field Test Shooting Video I test out the Velocity and Accuracy of the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle by first placing 5 rounds through my Chronograph and recording the feet per second of each shot then averaging them out. For the second portion of my Indoor Shooting Performance Test I setup a paper target 30 feet away and then shoot 10 rounds back to back to see what the spread or grouping size is. I follow this up with a full auto burst just for fun to see if the grouping still remains nice and tight.
For my Velocity test I used .25 grain Plastic Airsoft BB’s rather than the .20 in the claimed fps over 366 fps so I was expecting to get a little bit slower results. I did manage to average right around 325.5 fps with all shots consistently hitting either 325 or 326 fps so super consistent.
I then setup my brand new paper target and using a rested and seated shooting position from 30 feet back I placed my first 10 rounds into the target. This is when I discovered the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle liked to shoot fairly low even when using the raised elevation option on the rear sight. Because of this I had to aim a little bit higher on the paper target to place shoots more centered. Once I figure out my aim point I did mange to get a fairly tight 10 round grouping of close to an inch with a couple of stagers pushing it out to 2 inches. Full auto was as predicted, lots of fun with a nice hole in the paper/cardboard leaving about a 3.5 inch opening.
The Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle performed well for me once I figured out that it liked to shoot rather low. I would suggest placing a bit of a spacer or riser under the rear sight to bring up the barrel at least for closer in shots where hop-up may not ark the Airsoft BB enough at that point. Other than that the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle had super consistent performance in terms of both FPS and accuracy.
Type: AEG Airsoft Rifles Manufacturer:Umarex / VFC Model:HK416 V2 Materials: Fiberglass reenforced plastic and metal. Weight: 7 pounds (3180 grams). Total Length: 28 - 31.1 inches (710-790). Barrel: 10.2 inches (260mm) non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 320 round magazines. FPS: 366+ fps.
Trigger Pull: The trigger pull on the Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle is similar to a light single action trigger as they are essentially an electrical on off switch. There is about a quarter inch of take up with virtually no extra friction to let you know when the release is going to be, with a bit of use you will figure out exactly when the trigger will release the action.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle, but plan to make my Field Test Shooting Video shortly. So stay posted for that video coming out soon. I do expected Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle to perform well as it is a high quality and not so inexpensive AEG Airsoft Rifle.
Build Quality: The Build quality on the Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle looks to be really good, there are lots of quality metal parts throughout this Airsoft Rifle including the top and bottom receiver, rails, parts of the sights, flash hider, magazine, charging handle, selector switch, magazine release, forward assist, dust cover, buffet tube and trigger. VFC (Vega Force Company) is the actual manufacturer of this product line and they are well know for making high quality Airsoft products.
Realism: The Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle is a 1 to 1 scale fully licensed replica of the real steel HK 416 compact CQB styled rifles . You’ll find that most part work in the same manner as with the real steel version including the Charging Handle, Forward Assist, Bolt Release, Magazine Release, Selector Switch and Pop-up sights.
Pros:
Full H&K Licensed via Umarex.
Made by VFC (Vega Force Company), well known for quality products.
Lots of metal parts where would find them on the real steel HK416.
Semi auto & full auto selectable.
No orange tip on Canada import version.
Comes with AR type compatible high capacity 320 round magazine.
Removable metal sights are adjustable for windage.
Lots of rail attachment positions.
Easy access to hop-up system.
Quality internals - V2 metal gearbox and built in Mosfet.
Fully adjustable rear stock.
Cons:
Price is on the higher end.
No elevation adjustment on sights.
Comments:
The Umarex VFC H&K AEG Airsoft product line is going to be on the higher end of the price spectrum for sure but you are getting a really quality product here fully H&K licensed. The Umarex VFC Heckler & Koch HK416 V2 AEG Airsoft Rifle has a really nice form factor allowing for a full size rear adjustable stock which will make your shooting position a lot more comfortable while still allowing for a rather compact form factor overall. I look forward to seeing how well the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle performs in my upcoming Field Test Shooting Video.
My Vimeo Table Top Review for the Umarex VFC HK416 V2 AEG Airsoft Rifle:
Type: AEG Airsoft Rifles Manufacturer:Umarex / VFC Model:HK416C V2 Materials: Fiberglass reenforced plastic and metal. Weight: 6.1 pounds (2780 grams). Total Length: 22.6 - 27.4 inches (573-696mm). Barrel: 8.3 inches (210mm) non rifled. Propulsion: AEG. Action: Single action semi & full auto. Ammunition Type: .6mm plastic Airsoft BB’s. Ammunition Capacity: High cap 320 round magazines. FPS: 366+ fps.
Trigger Pull: The trigger pull on the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle is similar to a light single action trigger as they are essentially an electrical on off switch. There is about a quarter inch of take up with virtually no extra friction to let you know when the release is going to be, with a bit of use you will figure out exactly when the trigger will release the action.
Accuracy: At this time I have not made my Field Test Shooting Video or even shot the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle, but plan to make my Field Test Shooting Video shortly. So stay posted for that video coming out soon. I do expected Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle to perform well as it is a high quality and not so inexpensive AEG Airsoft Rifle.
Build Quality: The Build quality on the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle looks to be really good, there are lots of quality metal parts throughout this Airsoft Rifle including the top and bottom receiver, rails, sights, flash hider, magazine, charging handle, selector switch, magazine release, forward assist, dust cover and trigger. VFC (Vega Force Company) is the actual manufacturer of this product line and they are well know for making high quality Airsoft products.
Realism: The Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle is a 1 to 1 scale fully licensed replica of the real steel HK 416 compact CQB styled rifles but in an even more compact design I believe specifically only found in Airsoft versions as I was not able to find the exact same model on the H&K Website. That said most part work in the same manner as you would find on the real steel version including the Charging Handle, Forward Assist, Bolt Release, Magazine Release, Selector Switch and Pop-up sights.
Pros:
Full H&K Licensed via Umarex.
Made by VFC (Vega Force Company), well known for quality products.
Lots of metal parts where would find them on the real steel HK416.
Semi auto & full auto selectable.
No orange tip on Canada import version.
Comes with AR type compatible high capacity 320 round magazine.
Pop up metal sights are adjustable for windage.
Lots of rail attachment positions.
Easy access to hop-up system.
Quality internals - V2 metal gearbox and built in Mosfet.
Ultra compact adjustable CQB stock.
Cons:
Price is on the higher end.
No elevation adjustment on sights.
Limited to physical size/type of battery used.
Comments:
The Umarex VFC H&K AEG Airsoft product line is going to be on the higher end of the price spectrum for sure but you are getting a really quality product here fully H&K licensed. The Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle is perhaps one of my favorites as I like more simplistic and minimalist styles of guns and this one for sure fits into that category. Even though it is small in nature it is super solid and heavier then it looks for sure when you pick it up with all the metal parts making up its build quality. I look forward to seeing how well the Umarex VFC Heckler & Koch HK416C V2 AEG Airsoft Rifle performs in my upcoming Field Test Shooting Video.
My Vimeo Table Top Review for the Umarex VFC HK416C V2 AEG Airsoft Rifle:
In this video I show you four Premium AEG Airsoft Rifles made by VFC and distributed and H&K Licensed by Umarex. This is not a detailed review but rather I focus on the basic specification and show my reaction as I take my first look at all four Umarex H&K AEG Airsoft Rifles. I do show off some close up photos so you can get an idea on the finish and what some of the components look like.
