Type: Airsoft Rifle
Manufacturer: KJWorks
Model: M700 Take Down
Materials: Metal with textured synthetic stock
Weight: 7.5 pounds (3415 grams)
Barrel: Smooth bore barrel
Propulsion: Gas operated (Green Gas or Propane)
Action: Bolt
Ammunition Type: 6mm plastic Airsoft BB’s
Ammunition Capacity: 10–11 round metal magazine
FPS: Up to 450 FPS

View fullsize

Trigger Pull: The trigger on the KJWorks M700 Take Down Gas Airsoft Sniper Rifle performs as expected for a bolt-action style hunting or sniper rifle. Most of the work is done when operating the bolt, leaving your trigger finger with a light, short, and crisp pull to release the firing pin. This shlep a lot keeping everything steady since you can relax your grip adn really focus on your shot placement.

View fullsize

Accuracy: Be sure to watch my full Field Test Shooting Video for the KJWorks M700 Take Down Gas Airsoft Sniper Rifle to see its performance in detail. I only tested it indoors at my Sea Can range due to cold weather conditions, which aren’t ideal for gas guns. Shooting distance was limited to about 30 feet, but I plan to revisit this rifle outdoors in better weather for longer-range results. At 30 feet, the M700 produced a tight 1-inch grouping and averaged around 400 FPS using .25-gram Airsoft BB’s.
Note: I did encounter some magazine loading issues when fully loaded, BBs from the right side of the double-stack magazine occasionally jammed and didn’t feed properly into the breach.

View fullsize

Build Quality: The KJWorks M700 Take Down Gas Airsoft Sniper Rifle feels solid and well-made throughout. The fit and finish are good, and all the mechanical components functioned properly aside from the occasional BB feed issue. I like the textured synthetic stock and soft rubber butt pad. This rifle features a lot of metal construction, including the bolt, inner and outer barrel, magazine, sling and bipod mounts, trigger and guard, Picatinny rail, and safety. It feels robust and well-balanced overall.

View fullsize

Realism: The KJWorks M700 is modeled after the Remington 700 platform, giving it a very authentic hunting rifle look. The Airsoft version mimics the real firearm closely in both form and function. Since it’s powered by Green Gas rather than a spring, the bolt action is smooth, light, and realistic to operate. All the parts that would normally be metal or steel on the actual Remington M700 are also made out of Metal with the Airsoft version. The stock is also Fiber reinforced like the real stele version.

View fullsize

Pros:

• Gas-operated bolt is far easier to cycle than a traditional spring-powered bolt rifle.

• Heavy use of metal parts throughout.

• Excellent balance and solid overall feel.

• Take-down design makes it easy to transport and store.

• Fiber-reinforced stock adds durability.

• Metal sling and bipod mounts for customization.

• Full-size drop-out metal magazine holds both gas and BBs.

• Easy-to-adjust hop-up screw.

• Ideal FPS for long-range shots without being overpowered.

• Consistent accuracy, good 30-foot performance should translate well to longer distances.

View fullsize

Cons:

• No sights or optics included, you’ll need to add your own.

• Occasional magazine feeding issues, especially when fully loaded.

• Slightly higher price compared to most spring-powered bolt-action Airsoft rifles.

View fullsize

Comments:
I’ve tested a few spring bolt-action Airsoft rifles before, and while those are simple (just load BBs and shoot), the gas-powered M700 offers a much smoother and faster bolt operation, perfect for quick follow-up shots. When seconds matter and targets are closing in, that speed can make a real difference.

The KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a great ready-to-shoot platform out of the box and can be easily upgraded with a sling, bipod, and of course, a scope, since it comes without sights.

My review unit had a minor magazine issue, but I believe this was specific to the sample I received and not a widespread problem. Overall, it’s a very capable and well-built Airsoft sniper rifle that delivers solid power, realism, and usability.

• Buy the G&G RK Beta AK AEG Airsoft Rifle in Canada

• Buy the AK AEG Airsoft Rifles in the US

View fullsize

I first reviewed the KJWorks M700P (the “P” for Power) back in 2018, so I was curious to see how the standard take-down version would perform. Ideally you’d mount a 3x (or higher) optic and test it at outdoor sniper ranges more typical for Airsoft sniper play, but the weather was rubbish for this session. Like last time with the M700P, I ended up doing the review inside my sea-can airgun range, which is fine for chronograph work but limits targets to about 30 feet.

For the indoor velocity test of the KJWorks M700 Take Down Gas Airsoft Sniper Rifle, I shot .25-gram plastic BBs through my Chrony. Over a five-shot string I averaged 403 fps, slowest was 400 fps and the fastest 406 fps, so reasonably consistent for a gas rifle. The gas mag was fully topped up with propane and the ambient temp was about 17°C (63°F). Lighter .20-gram BBs would of course register higher speeds, though in sniper builds you’ll often end up using heavier BBs than .20 g for better downrange performance.

View fullsize

Using the same .25-gram BBs for a close-range accuracy test at roughly 30 feet, the M700 Take-Down put most shots into about a 1-inch group with one odd flyer out to the right, could have been a bad BB or user error. I ran the test with a simple red dot since the rifle ships with no sights and I only needed something quick on the Picatinny rail for close work. I also had trouble getting all ten rounds from the 10-round mag onto the target because of some misfeeds / misreads; I don’t recall the M700P exhibiting this behavior, so it may be a quirk specific to my test unit.

Overall the KJWorks M700 Take Down Gas Airsoft Sniper Rifle is a nicely executed sniper-style Airsoft rifle — very easy to dismantle and carry in a pack, reasonably gas-efficient, quiet, and powerful enough for the role. The feeding hiccup seemed to crop up when the follower was near the top of the stack (spring tension at its peak) and mainly affected BBs on the right side of the double-stack magazine — which makes me suspect a defect in my sample rather than a design choice. It doesn’t come with sights, so you’ll need to pick up a scope or optic, and personally I prefer the take-down model for its extra versatility.

• Buy the KJWorks M700 Take Down Gas Airsoft Sniper Rifle in Canada

• Buy Airsoft Sniper Rifles in the US

In this Umboxing Preview Video I take a quick look at tow Airsoft Guns from KJWorks, one is a Gas Blowback Airsoft Rifle and one is a CO2 Full Blowback Airsoft Pistol. I don’t get into too many of the details or specifications as this is really the first time I have seen either of these Airsoft Guns in person, a full table top and field test video review will be coming up for both of these Airguns down the road but I did want to get them out there so everyone know these are either in the Replica Airguns Online Store or will be showing up soon.

The first item I grabbed out of the box was the KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol which looks a lot like a Glock but with a full auto selector switch on the left side of the slide and it also is the TBC model so it comes with a barrel extension that attaches to the inner barrel and the option to add a mock suppressor to the outside barrel threads. This version comes with a CO2 magazine but I am sure there are option to use it with a Gas magazine also.

Next out of the box was the KJWorks M700 Take Down Gas Airsoft Sniper Rifle which is a break down bolt action gas operated Sniper based Rifle as the name suggests. It is super easy to assemble and has a nice smooth bolt with the only sighting option being the addition of a scope added to the included picatinny rail. The base of this rifle is very heavy so it is is not a light weight rifle by any means.

Here are some more details for each of these Airsoft Gun:

KJWorks KP-18 TBC CO2 Full Blowback Airsoft Pistol

• Type: Airsoft pistol.

• Manufacturer: KJ Works.

• Model: KP-18-TBC-CO2.

• Weight: 1.7 Pounds (775 grams).

• Length: 7.9 inches (20cm).

• Caliber: 6mm BBs.

• Propellant: CO2/GAS.

• Capacity: 22 rounds.

• Velocity: 410 FPS.

View fullsize

KJWorks M700 Take Down Gas Airsoft Sniper Rifle

• Type: Airsoft rifle.

• Manufacturer: KJ Works.

• Model: M700 Gas Takedown

• Weight: 7.9 Pounds (3600 grams).

• Barrel length: 21.9 inches (55.5cm).

• Caliber: 6mm BBs.

• Propellant: GAS.

• Capacity: 11 rounds.

• Velocity: 400-470 FPS.