View fullsize

There has been some confusion when it comes to the KWC made Mini UZI regarding semi and full auto abilities and also when it comes to build materials. But before we get into that if you have one of these Mini UZI Blowback BB or Airsoft guns then most likely yours is made by KWC even if it was distributed through RWS, Umarex, Gletcher, Cybergun or some other company. When it comes to the build materials used they are all made by KWC so they are all built the same with plastic and metal in the same places.

View fullsize

Let’s first talk about why some of these Mini UZI’s only come in semi auto with the Full auto selection not available out of the box. This is most likely because in some countries a full auto BB and/or Airsoft gun can be illegal so to play it safe many airguns that are originally made to shoot in both semi and full auto are modified to only shoot full auto. This is the case with most of the companies that redistribute the KWC Mini UZI under their own brand name. That said if you buy the KWC Mini UZI in either 4.5.mm Steel BB or 6mm Plastic Airsoft from our Replica Airguns Canada or US Online Stores, you will be getting a full auto ready out of the box airgun!

If your MINI UZI Airgun is not full auto ready then checkout my Full Auto Mod Video but make sure before you do this modification it is legal in your country to do so or you could be looking at jail time :(

View fullsize

When it comes to build materials the KWC Mini UZI is often described on websites as being full metal which is close but not entirely true. It is accepted that most full metal airguns will have plastic grips but the KWC Mini UZI also has a plastic shroud around the main receiver that is am all in one piece that makes o=up the front and back sights. This might lead you to think that the gun is mainly plastic which is far from the case since all other parts like the receiver block, bolt, top plate, barrel, rear stock, trigger and magazine are metal. This give the KWC Mini UZI its sold 4.8 pound weight. The heavy metal internal bolt really makes this blowback airgun rock when you shoot it simulating very close recoil action to a 22LR. The KWC Mini UZI for sure has the most blowback recoil out there.

View fullsize

If you are looking for the most bad ass and action packed full auto BB or Airsoft Gun then I would highly suggest you consider getting one of these KWC Mini UZI’s. Just be sure to have lots of CO2 and BB’s on hand because you will go through both like crazy…

• Buy the KWC Mini UZI BB Gun in Canada

• Buy the KWC Mini UZI Airsoft Gun in Canada

• Buy the KWC Mini UZI BB Gun in the US

• Buy the KWC Mini UZI Airsoft Gun in the US

With the popularity of the KWC - Cybergun 1911 Blowback CO2 Pistols and how super realistic they are in so many ways, it is no surprise that people often ask me if they can replace the original grips with grips made for a real 1911.

The short answer is yes you can! You will have to be prepared to remove just a little bit of material from the backside of both grips near the bottom of the handle where there is an area that has been flared out to accommodate the CO2. Not really a big deal, you can use a Dremel for the quick and easy approach or even some sand paper if you don't mind taking a little more time.

In this Vimeo Video I demonstrate using grips that fit a real 1911 and show you just exactly where you will need modify them to fit on the KWC and Cybergun CO2 Blowback 1911 pistol series.

Buy the KWC Blowback CO2 1911 BB Pistol in Canada

You guessed it, another Full Auto Fun YouTube Video! And another great Blowback BB gun from the past dusted off and brought out for some more shooting fun :)

You may remember my Cybergun GSG 92 CO2 Blowback 4.5mm Steel BB Pistol that I made several video reviews of, including a how to modify it to shoot both in semi auto and full auto modes. Well the good news is our new KWC Model M92 unlicensed versions (no ugly warning lettering either) now come with the semi and full auto selectable feature so no need to modify, just buy one and your ready to go!

With that said this video is me actually shooting my original Cybergun / KWC Licensed GSG 92 version that I modded to shoot full auto. It was giving me a bit of trouble today but it seemed to work out the kinks near the end.

In an upcoming Full Auto Fun Video I do plan to bring out a new KWC full auto ready M92 and Mini UZI to see how these factory full auto 4.5mm BB guns shoot out of the box.

Buy the KWC M92 BB Pistol

This "Full Auto Fun" video focuses on my KWC/Cybergun 4.5mm Steel BB CO2 Blowback Mini UZI BB Gun, where I kick of a short series based around shooting a bunch of 4.5mm Steel BB machine guns! Sounds like fun cause it is fun!

This KWC/Cybergun Blowback Mini UZI comes in a variety of versions, 4.5mm Steel BB and Airsoft versions, it also comes in RWS and KWC Distributed models.

In this video I basically shoot a bunch of clay pigeons positioned in various locations and film it using 4 different camera angles to spice things up a bit.

I also mention some upcoming videos where I will be shooting my RAP4 MP5 and Baikal Drozd Blackbird Full Auto BB guns so make sure to watch those video when I upload them later on this week!

Buy BB Mini UZI in Canada

Buy BB Mini UZI in the US

Buy Airsoft Mini UZI in Canada 

Buy Airsoft Pistols in the US

Another quick revisit of the KWC/Cybergun M92 Beretta - Taurus full metal, full blowback, CO2 4.5mm Steel BB pistol series. They come in several flavors but are all made by KWC and in many cases redistributed licensed by Cybergun. This Field Test Shooting Video Review focuses on the Cybergun Swiss Arms P92 version.

I have several videos I made for the Cybergun GSG 92 version showcasing an early on Table Top Review, Field Test Review and even a Full Auto Mod Video.

Now that I have a more standardized Field Test Shooting format, I though I would revisit this series of KWC/Cybergun Beretta - Taurus Replica BB Pistols and do a follow up Field Test to get some more camera angles and hopefully a nice tight target grouping using my standard semi rested position from 20 feet away.

I also incorporate some high speed video near the end of this Field Test Shooting video Review to go along with the Chronograph and target portion of the Filed Test Shooting review.

The KWC - Cybergun Full Blowback All metal serious of Replica CO2 BB Pistols has been hugely popular over here at Replica Airguns and for good reason, they are very realistic in looks and operation, are priced very respectably and replicate several of the more popular semi auto pistols.

Buy the Swiss Arms P92 in Canada  -  Buy the Swiss Arms P92 in the US

This is not meant to be a full review of either the BB or Airsoft version of the Cybergun - KWC CO2 Blowback Mini UZI's but I do talk about specifications, show you around both guns, and put them both through a full Field Test so I guess in a way, perhaps it can be considered to be a full review ;)

I will list the specifications here for you but I am not going to get into details like Trigger Pull, Build Quality, Accuracy and Realism. You can check out my other video reviews for more information on the Mini UZI:

• Cybergun 4.5mm CO2 Blowback Mini UZI Review

• Cybergun - KWC Mini UZI 4.5mm BB Gun Full Auto Modification

• Cybergun Mini UZI CO2 4.5mm BB Gun Chronograph and Full Auto Shooting Test

• Dual Full Auto BB Machine Gun Destruction

Type: CO2 Blowback Machine gun.

Manufacturer: Cybergun - KWC.

Model:Mini UZU.

Materials: Metal and Polymer.

Weight: 4.8 pounds.

Barrel: Metal, non-rifled.

Propulsion: CO2 x1.

Action: BB Semi auto only - Airsoft selectable semi & full auto, single action only.

Ammunition Type: 4.5mm Steel BB - 6mm Plastic Airsoft

Ammunition Capacity: 25 - 38 rounds

FPS: 350 - 400

As I said you can check out all my other videos for info on these very accurate Mini UZI Replicas, I mainly want to go over some of the main differences and similarities for both the BB and Airsoft versions.

In terms of build quality they are made almost exactly the same and weigh in at a hefty near 5 pounds, the only differences are the inner barrel and magazines to accommodate the different sized ammo. The BB version has a 25 round single stack magazine that does not have a follower to stop the bolt from continuing to operate even after the magazine is empty. While the 6mm Airsoft version has a double stack magazine that holds 38 rounds and does have a follower to stop the bolt which can save you some unintentional wasted CO2.

The Airsoft Mini UZI version is distributed by KWC while the 4.5mm BB version is distributed by Cybergun, you will find the UZI and IWI licensing on the Cybergun 4.5mm BB version but not on the KWC 6mm Airsoft version.

Out of the box the KWC Airsoft Mini UZI is ready to go in both semi auto and full auto while the 4.5mm steel BB version will only shoot in semi auto mode, it can however be easily modded to shoot in full auto.

Both guns come in cardboard boxes with manuals, some BB's and an Allen key to tighten the CO2. The KWC Airsoft Mini UZI also comes with a handy speed loader.

There is a slight fps velocity difference between the two with the KWC Airsoft 6mm plastic rounds traveling at around 400 fps (with .20 gram BB's) and the 4.5mm Steel BB's traveling at right around 350 fps. In the field test portion I test both guns out on some water filled cans to see how each ammo type performs in terms of penetration.

Your best bet is to watch both my Table Top and Field Test Comparison Video Reviews and see for yourself how they compare!

Buy BB Mini UZI in Canada   -   Buy BB Mini UZI in the US

Buy Airsoft Mini UZI in Canada   -   Buy Airsoft Pistols in the US

• Also Checkout my Field Test Shooting Review for the Cybergun Sig Sauer P226.

Type: 6mm Plastic BB Airsoft Pistols.

Manufacturer:Cybergun

Model:Sig Sauer P226

Materials: Metal slide & frame.

Weight: 2 pounds (920 grams).

Barrel: Metalnon-rifled smooth bore.

Propulsion: Gas Blowback (GBB).

Action: Single and double action.

Ammunition Type: 6mm plastic Airsoft BB's.

Ammunition Capacity: 26 rounds.

FPS: 383 fps (Using .12 gram BB's).

Trigger Pull: The trigger pull on the Cybergun Sig Sauer P226 Airsoft Replica is good in both single and double action. Once the slide is pulled back and released the first round is chambered and the hammer will remain back placing the P226 in single action mode, the pull is light and the take-up is fairly short, most of your shots will be in single action mode unless you use the de-cocker to lower the hammer for a subsequent double action next shot, double action shots are still pretty light but much longer in order to cock the hammer.

Accuracy: Shooting the Cybergun Sig P226 from 20 feet out in semi rested position I was able to get very good results. I placed 10 rounds in about 1.5 inches with the shot placement being a bit low possibly due to my barrel mod, adjusting the hop-up may bring the aim point back up to where it should be. The Sig Sauer P226 Airsoft Replica shot right around the 316 fps range while conducting my 5 shot average chrony testing which was lower than advertised but I was using much heavier .20 gram BB's. You can expect to get a full magazine worth of shots out of each gas fill-up but I did notice that as the magazine got colder it did tend to become much less efficient and also seemed to vent a lot of vapor.

Build Quality: The build quality is generally good and I was surprised at the finish on this model as the paint is not showing any wear marks so far, the fit is good with minimal slide and barrel wobble and everything is working very well with no problems so far with a fair amount of shots through it, guess you could say I like shooting this gun :) Most of the gun is metal with only the grips and a couple internal parts being plastic.

Realism: The Cybergun Sig Sauer P226 6mm Airsoft pistol is a replica of the real steel Sig Sauer P226 right down to the licensing and it really is a great looking and functioning Airsoft Replica. You can field strip this gun exactly like a real Sig and all the mechanical parts work just the same including a working de-cocker and adjustable front sight.

Available in the:Replica Airguns Store

Pros:

• All metal pistol with good overall realistic weight to it.

• Very crisp and firm full blowback operation.

• Excellent fit and finish - paint seems to be wearing well.

• Nice accurate looking and working Sig Sauer P226 Replica with licensing

• Working de-cocker.

• White dot sights for quick target acquisition.

• Front sight is adjustable for windage.

• Full size drop out magazine holds BB's and gas.

• Fully field strip-able.

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

Cons:

• Comes with an orange tip not required for Canada.

• Seemed to shoot a bit low for me, could adjust with hop-up a bit?

• Only one magazine per Gas fill.

Comments:

I am a big Sig Sauer fan so it would take a lot for me to not give this gun a good review, with that said it performed pretty well, sure it was not the most powerful but I was using gas over CO2 so I was not expecting too much, it also shot a bit low for me but again that may have been because of the barrel mod so who really knows for sure at this point ;) And yes it came with that unsightly orange tip that I took short work of removing. At teh end of the day I still love it and it performed well without letting me down, just like a would expect from a real Sig Sauer!

My Vimeo Table Top  Review of the Cybergun Sig Sauer P226 GBB Blowback Airsoft Pistol:

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

• Also Checkout my Table Top Review for the Cybergun Sig Sauer P226.

I usually do my Table Top Video Review first but this time around I did my Field Test Video Review first since I was all setup checking out a couple other guns at the time. When I do my detailed Table Top Video Review for the Cybgergun Sig Suer P226, I'll post the link here so stay tuned. If you have not already checked out my Barrel Mod Video for this same gun then check that video out where I remover the extended orange portion of the metal barrel and make the barrel flush with the end of the slide which is how the real steel version was originally made.

Getting back to the Cybergun Sig Sauer P226 GBB blowback Airsoft Pistol field test, as per usual I test this Airsoft semi auto gas blowback pistol on the Chronograph to see what kind of real world velocity I get and since I had some Green Gas on hand, I used it for this part of the review and got an average of 315 fps with a six shot string.

I also stepped back 20 feet and shot 10 times at my stationary target using a semi rested position (sand bag up front and kneeling in the back). Even though the Sig Sauer P226 shot a bit low I did get about a 1.25 inch group with the exception of one flyer that hooked down just a bit making the 10 shot group a bit wider at just under 2 inches. The low shot placement may have been caused by my barrel mod but since I did not do a before and after test, I can not say for sure?

Make sure to watch my YouTube Video of this Field Test as it also includes some nice slow-motion of the slide blowback at both 400 and 1200 frames per second.

Watch my full Video Field Test Shooting Vimeo Video below:

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

I have not done my official Table Top and Shooting Reviews for the Gas Blowback Airsoft Cybergun Sig Sauer P226 but I really wanted to cut off the ugly orange painted barrel tip, it was kind of driving me crazy! keep in mind here in Canada we are not required to have orange tips on our Airsoft guns, most of the all metal or all black Airsoft guns imported these days fall into the "airgun uncontrolled firearms" category. If you live in the US or other parts of the world you could be breaking the law if you do this mod so be warned...

Your best best is to simply watch my Vimeo Video as I show you exactly how I removed the orange painted portion of the metal barrel using a hack saw, file, vice and some sand paper. All in all it was not too difficult and only took about 15 minutes to complete...

Buy this Airsoft Pistol in Canada  -  Buy this Airsoft Pistol in the US

Sometimes you just got to make a video because you can and because it's just plain old fun! And that's why I made this video of me shooting some cans with dual full auto BB machine guns. One is my full auto converted and trusted Cybergun Mini UZI and the other is my newly acquired ZMZ Tyrex PPA-K-01 Russian Machine Pistol.

So sit back and enjoy, I know I did :)

Buy this gun in Canada   -   Buy this gun in the US

Mil3 sent me some more updated photos of his customized Cybergun Tanfoglio Witness 1911 now with the Sight Rail add on.

Buy this gun in Canada   -   Buy this gun in the US

I can't help but share some of the photos my happy viewers and customers send me and it seem like the hot item right now is the Cybergun Tanfoglio Witness 1911 CO2 BB Pistol yet again.

These latest photos are brought to you by Mil3 who added rubber grips and an accessory rail to his Tanfoglio Witness 1911. He said the rubber grips only needed some slight carving out on the back side to make them fit.

Buy this gun in Canada   -   Buy this gun in the US

 

I've had a few questions about replacing the gips on the Cybergun Tanfoglio Witness 1911 BB pistol and if it is possible to use standard 1911 wood grips? The answer is yes if you don't mind spending about 15-20 minutes removing just a bit of the wood material in a few spots on the 1911 Wood Grips

Here are the instruction thanks to one of my Customers and viewers Michel:

First of all the holes are in the right place thank god for that! A dremel is the ideal tool youll need, and the whole mod.

1. Mark out the material you want to remove.
2. Remove the material on bottom part of each grip with a dremel using a cicular sandpaper bit.
3. Repeat on other grip .On the top of the grip on the mag release side you might have to remove material to clear pin.

After on the other side of the mag release button make sure there is enough clearance for when you depress the button.

Here are a few pictures of the mod. Have fun:

Buy this gun in Canada   -   Buy this gun in the US

As promised, here is my Vimeo video Chronograph test along with some more shots on target for an idea on the accuracy for the Cybergun GSG 92 Beretta 92FS copy.

My Chronograph results where very good with an average 8 shot FPS result of 314, right in line with the manufacturers specifications! I also took some extra time to do some more target testing and shot the GSG 92 BB shooter at a target from 20 feet out in a free standing position and I didn't get the best grouping from it today but hey, it's got full auto too so how important is accuracy?

Lastly a pulled out my Casio high-speed camera and took some video of the blowback action of the Cybergun GSG 92FS Beretta replica at 210 frames per second.

Enjoy my Vimeo Video of the Cybergun GSG 92 CO2 BB gun getting Chronographed, shooting at a target and slowed down a bit.

Buy this gun in Canada

Buy this gun in the US

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN MINI UZI BB GUN REVIEW

• CYBERGUN - KWC MINI UZI BB GUN FULL AUTO MODIFICATION

Today I got my Cybergun Full Auto CO2 powered BB shooting Mini UZI out for a Chrony Chronograph test. As stated by the factory, this BB shooting Mini UZU is supposed to shoot right around 344 fps which is not bad for a true blowback airgun. And what I mean by true blowback - it's when an airgun uses some of the CO2 power to cycle the action of the gun, which cocks the firing mechanism and loads a BB all in the blink of an eye - just like a real semi auto shooter.

The Cybergun Mini UZI shot nicely between 350 and 360 fps - again, another impressive result even on a not too warm day! (10 degrees Celsius - 50 degrees fahrenheit)

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

I also took the opportunity to film the Cybergun Mini UZI shooting in full auto, at target while I used my high speed Casio camera to slow down what was actually happening. The result is you can really see all that's going on while you fire this dynamic air gun.

Keep in mind that the Cybergun Mini UZI does not come from the factory with the full auto feature. It is an easy mod however, and I have a video here on how to do it.

Watch my Vimeo video of the Cybergun Mini UZI Chronograph and Full Auto Shooting Test:

Buy this gun in Canada

Buy this gun in the US

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN MINI UZI BB GUN REVIEW

• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

"Before you attempt to do this modification you need to be aware that it may void your warrantee and/or you may fail and either break something or incorrectly reassemble your Mini UZI rendering it "Broked"! This is your problem so please do not attempt this modification (even though it is fairly easy to do) unless you're 100% confident you can do it and are aware of the possible consequences. Make sure to also take into account any gun laws in your area prohibiting full-auto capable firearms!"

(Special thanks to Herman for showing me the ropes on this modification)

This modification will make your semi-auto "only" Cybergun/KWC Mini UZI BB Gun into a full auto capable 4.5mm BB machine gun. From the factory the full auto switch position (Far Left "A") is disabled but the full auto selector position is visible. The actual full-auto functionality is still present in the Mini UZI but has been decommissioned by the simple means of blocking the selector switch from being moved to the far left full-auto or "A" position.

This full auto modification will show you how to disassemble the Cybergun - KWC Mini UZI BB Gun and remove the small plastic selector switch blockage so you will be able to manually switch between semi auto and full auto modes. This modification takes about 15 minutes to complete.

<!-- google_ad_client = "ca-pub-9036472715040282"; /* Replica Airguns Content */ google_ad_slot = "1487049688"; google_ad_width = 468; google_ad_height = 15; //-->

You will need the following tools: A pair of pliers and either a pair of small wire cutters or a file.

Let's begin! Below are the two pre-modification positions available from the factory:

"S - SAFE"

"R - SEMI AUTO"

Below is a closeup of the top bolt cover that we will be removing to access the internal bolt for removal:

In the next photo we have removed the bolt cover by pressing the "angled button" towards the rear sight:

And now the bolt is removed:

I removed the grips but this is not necessary:

Now you will need to remove the lower receiver pin located at the back end of the receiver closest to the grip safety. Use a pair of pliers to pinch the metal pin while pushing it through. Once the pin is started you can use the pliers on the other side to pull the pin all the way out. You may need to us a fair amount of force to do this as the fit of the pin is tight:

Once the pin is removed the lower receiver can be detached:

You can see in the picture below the small plastic nub that we will need to remove in order to restore full-auto capability:

I used a pair of small wire cutters to clip this plastic nub off, but you could use a file too. Just make sure that the plastic is flush and does not have any burs or protrusions.

Below is a photo of the Plastic Nub removed from another angle:

After that, all you need to do is reassemble you Mini UZI in revers order to finnish the Full Auto modification.

In the below Photos you can see we have restored the ability to move the fire selector switch over to the "Far Left" or "A" position, reenabling the Cybergun - KWC Mini UZI BB Gun to shoot in full auto when desired.

"A - FULL AUTO"

Now enjoy your Cybergun - KWC Mini UZI BB Gun in full-auto as it was originally designed!

Here is my Vimeo Video in Narrative with Photos:

Buy this gun in Canada

Buy this gun in the US

Related Posts:

• FULL METAL UZI BLOWBACK CO2 .177 BB GUN ON ITS WAY

• CYBERGUN - KWC MINI UZI BB GUN FULL AUTO MODIFICATION

• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

Type: BB air pistol.

Manufacturer: Cybergun.

Model: Mini UZU.

Materials: Metal and Polymer.

Weight: 4.8 pounds.

Barrel: Metal, non-rifled.

Propulsion: CO2 x1.

Action: Semi auto (Selectable Full Auto with Mod) blowback, single action only.

Ammunition Type: Steel BBs 4.5mm.

Ammunition Capacity: 25 rounds

FPS: 344

Trigger Pull: The trigger pull is very light with an easy break.

Accuracy: Very good, even with all the heavy blowback recoil!

Build Quality: Excellent, with a good amount of metal construction, good weight and craftsmanship with good fit and finish. Much of the gun is made out of metal with the exception of some of the outer receiver and grips.

Realism: This is a very close replica of the actual real steel with many of the same markings in all the right places, It's hard to find any real differences other than the fact that it shoots 4.5mm BB's and has a bit more plastic.

Pros:

• Extremely realistic airgun replica of the Mini UZI.

• Metal construction where it counts.

• Would make an excellent training gun as it functions just like a real Mini UZI.

• Blowback action is incredibly firm (more than a rimfire 22 cal.) adding to the realism of shooting this weapon.

• Can be easily field striped.

• Can be easily modified to fire in either Semi Auto or Full Auto by removing one small plastic blockage.

• Adjustable sights.

• Very useful metal folding stock.

Cons:

• It goes through CO2 very fast.

• When the magazine is empty, the slide bolt does not stay open and the gun will continue to fire waisting CO2.

• Some of the outer materials are plastic, would have been nice if they too where metal construction.

Comments:

This is a really nice blowback BB gun. Although it is advertised on many websites as being all metal, it does have some plastic outer parts, but the parts that get the most wear and tear are made out of metal. That aside, the Cybergun Mini UZI is pretty much an exact copy of the real Mini UZI with many of the same markings as the original. One feature that makes it feel even more genuine is the very heavy blow back recoil, it is alarming at first and I would even say it has more recoil than a rimfire 22 cal. gun does. It only comes in a semi auto version but all Cybergun did to inhibit full auto mode was to simply add a plastic nub that stops the fire selector switch from being selected to full auto. Once this plastic nub is removed, full auto mode is resorted. This well made BB gun is a bit pricy but you get a lot of gun for your money!

Buy this gun in Canada

Buy this gun in the US

This Article was graciously provided by one of my viewers: Lee

Related Posts:

• SIG SAUER X-FIVE STAINLESS STEEL VERSION

DISCLAIMER, PLEASE READ AND UNDERSTAND!

• This walkthrough is for information purposes ONLY, if you decide to dismantle your BB gun you will void any warranty you have with the manufacturer.
•  I will not be held accountable for your actions or any damage that is caused by your negligence. Therefore, if YOU decide to dismantle your BB gun and break something during the dismantling or assembling it is your problem not mine.
• If you don’t feel confident or comfortable doing any of these steps STOP and do not proceed any further or you may do damage.
• YOU WILL LOOSE ALL THE SIG SAUER MARKINGS ON THE GUN.

Having said all that, this is my first ever instructional so I’m going to try and make this walkthrough as easy as I can for you to understand. You will need the following: Flat tip Screwdriver for the grips, Small Philips Head screwdriver, small punch & needle nose pliers – the last 2 are optional.

Make sure you have a clean work space and lay out every part in the order that you remove it Left to Right, come reassembly time you work Right to Left it makes reassembly so much easier.

Step 1:

Field Strip the slide until it looks like this:

Unscrew these 2 screws, these hold in the “Breech Block” once your unscrewed cup the end of the slide in your hand and let the Breech & Screws fall in your hand – Set these aside.

That’s it your Slide should look like this:

It is now ready for paint removal.

Step 2:

Take the Frame and start removing the grips Left hand side first:

Flip the frame over and remove the right hand side grips:

Carefully remove the trigger return spring, it is under tension and it WILL fly across the room – I spent an hour looking for it one day! Also while we are at it, you can remove the cover to the magazine release.

To remove the safety, place your flat tip screwdriver between the frame and the safety and twist ever so gently this will separate the safety and all you need to do now is grab the safety from either side and gently pull & wiggle until it separates.

Once the safety is removed you will see the safety bar, this lifts off.

Step 3:

Lift this little pin out and remove the spring, very carefully push this pin from the other side and remove, be careful because once this happens your hammer assembly is loose and free from the frame.

Slowly and gently remove the hammer assembly:

Note the little shiny piece that sits on the side of the hammer assembly, try very hard not to let this piece fly out, it is a pain to get back in, if it does fly out keep calm and take your time, don’t force the little spring in, it seats in behind the shiny metal thing – sorry I don’t have a proper name for it.

Also make sure that the spring next to it is in the locked open position, if it snaps back just get the tip of a small screwdriver and slide it to the left until it locks.

The hammer return spring assembly at the back of the grips can be removed and set aside.

Removing the trigger assembly is easier than it looks; you need to remove the takedown lever by rotating it counter clockwise until it stops.

Push it through the frame and rotate it back clockwise to remove it all together.

Remove the screw holding the trigger assembly:

Lift out the trigger assembly; be careful of the slide lock spring it wont Fly out, but it will fall out.

If you want to remove the magazine release, there is a spring that sits at the rear of the trigger guard;

Push the magazine release in part way & with the flat tip screwdriver lifts the up to remove it, once removed the magazine release will simply fall out.

THAT’S IT! We’re done, ready for the paint removal. Any paint stripper is fine.

KEEP IT WELL AWAY FROM THE PLASTIC PARTS!

Follow the manufacturer’s guidelines for use of their product and thoroughly clean the slide and frame after you have removed the paint.

YOU WILL LOOSE ALL THE SIG Sauer MARKINGS ON THE GUN.

Rub over the slide and frame with #0000 Steel wool or 1200 grit Wet & Dry paper. Clean again and using the paper or steel wool with some ALUMINUM polishing compound like Autosol and some good ol fashioned elbow grease polish the slide and frame until you reach your desired outcome. Clean it all down again and wipe it down with a rag that has had gun oil or my preference “Fluid Film”.

Reassemble the gun in the reverse order and viola one shiny SIG Sauer X-Five.

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• CYBERGUN MINI UZI BB GUN REVIEW
• CYBERGUN - KWC MINI UZI BB GUN FULL AUTO MODIFICATION
• CYBERGUN MINI UZI CO2 BB GUN CHRONOGRAPH AND FULL AUTO SHOOTING TEST

I have been holding off and holding off on this gun for a while now but I just can't wait any longer! So today I finally ordered up a Full Metal UZI Blowback CO2 .177 BB Gun from the Air Gun Source here in Canada.

I'm not 100% sure who makes this full metal replica UZI BB gun but I believe it may be the Cybergun version. There seems to be identical version distributed by "Armist Industries" and "KWC", when it comes I should have more info about it. This UZI is stated to be "Full Metal" but I have heard conflicting stores and again when I get it I will update you on the quality of this nice UZI Blowback BB Gun.

These guns ship with a selector switch that has three positions: (A-R-S), one is the safety and the other two are semi-auto only. This gun does not ship with a full-auto feature but I have a  source who has converted his to full auto and he is sharing this information with me shortly. I plan to mod mine so it has a selectable semi auto and full auto.

This gun is reported to have a very heavy blow back action with significant shoulder kick for a BB gun. Sounds like fun! It has also been chronographed at 390 FPS! And it even comes with a folding Stock.

Here are some basic stats for you until I do my full review...

• 344 FPS*OUR TESTS SHOW 390 FPS!
• Full metal
• Blowback action
• Semi-auto
• Removable 25 round magazine
• Foldable metal stock
• Uses one 12g CO2 cartridge
• .177 calibre (4.5mm) BB's
• Length: 14"
• Weight: 4.85 lbs
• 30 Day Warranty
• Made in Taiwan

Buy this gun in Canada   -   Buy this gun in the US

Related Posts:

• SIG SAUER X-FIVE P226 TAKE DOWN FOR STRIPPING AND PAINTING

One of my viewers (Lee) sent me some pictures of their Cybergun Sig Sauer X-Five BB gun that he stripped down to the bare metal. His had some of the paint flake off so he decided to take it down to bare metal. It looks pretty good and he says with some of his "secret" metal oil on it, it stays rust free.

Here are some picts of it:

Buy this gun in Canada   -   Buy this gun in the US