Air Venturi 3000 PSI Aluminum HPA Tank with Stock and Adapter Table Top Review

No Comments

Type: Airgun Accessory.
Manufacturer: Distributed by Air Venturi.
Model: Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank.
Materials: Aluminum.
PSI: 3000.
Capacity: 13 CU.
Output PSI: 1100.
Diameter: 2 inches.
Length: 10 inches.
Features: Two ASTM burst disks, integrated pressure gauge.
Accessories included: Buttstock, CO2 Adapter.

In this Table Top Review Video I go over the features and benefits of the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank system, what to expect and some of the Pros and Cons for it.

I will also be following up my Table Top video with a Field Test Shooting Video to see what possible advantages and disadvantages the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank has in a real world test of its performance, hopefully all advantages!

Pros:

  • Compact and is the perfect size to use as a rear buttstock for various 88 Gram and or HPA rifles.

  • Smaller tank means if you are using a foot pump it won’t take all day to fill up :)

  • Comes with adapter so can be used with regular HPA and 88 Gram CO2 systems.

  • Regulated to 1100 psi so should perform better in terms of max velocity and consistency compared to CO2 which is around max 800-900 psi with velocity being effected by cool down.

  • Not effected by colder temperatures compared to CO2.

  • Once you have this tank the cost is virtually nothing to shoot compared to expensive 88 Gram CO2 cartages. You just need to buy your pellets or BB’s.

Cons:

  • Still takes a while to pump up using a foot pump system.

  • Higher initial cost ($195) than simply buying 88 gram CO2 cartages when you need them.

  • Will need access to a pump or compressor to use it.

  • Doesn’t look as good as the supplied buttstock at least with the Sig Sauer MCX and MPX.

Comments:

I guess the question is who is this for? If you are a casual shooter that perhaps owns the Sig MPX or MCX or even another 88 Gram CO2 Air Rifle that the Air Venturi 3000 PSI with Stock & Adapter Aluminum Tank would work with then this may be a bit expensive especially if you don’t have a way to pressurizer the tank at home. On the other hand if you already have a foot pump or air compressor or easy access to one and maybe you have other HPA or CO2 based airguns this tank will work with then it’s kind a no brainer to get it. Maybe you juts want a system that gives you maximum and consistent velocity no matter how cold it is outside. All good reasons to get one in my books.

Airsoft, Accessory, BB, Bulk Air, CO2, Paintball, PCP, Pellet, Pistol, Review, Rifle, Semi Auto, YouTube Video, Full Auto AirVenturi