Seems like all I am focussing on is Airsoft guns lately, well that's just what is coming across my table at the moment... Don't worry I am sure there will be some BB gun reviews coming up shortly :) Anyway in this Field Test Shooting Review I take a look at the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol and test its accuracy and velocity. If you want some more details on this gun I have already made some other videos for the 4.5mm steel BB version so you can watch both my Table Top and Field Test Shooting videos for the 4.5mm Steel BB ASG Bersa BP9CC CO2 Blowback Pistol.
Getting to the actual Field Test Shooting review, I performed my standard five round Chronograph velocity fps test using .20 gram plastic Airsoft BB's with a brand new 12 gram CO2. The fastest Airsoft BB achieved by the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol was 413 fps and the slowest came in at 342 fps with a five shot average of 390 fps. The slowest shot was the last one in my Chronograph test and it even sounded a bit different like it wasn't getting full CO2 from the valve. This would present a problem later on in my accuracy test as it seemed the CO2 valve need to working in before this gun started to perform properly. I am guessing there may have been some debris in the valve area that needed to work its way out?
On with my Field Test Shooting portion of this review to determine the accuracy of the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol. I set myself up 30 feet back shooting from a semi-rested position (Sand bag up front and standing in the back). This shooting position serves to provide a stable shooting platform for overall accuracy and what I should expect to get from the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol. Keep in mind the results are always dependant on how I shoot on the day of my testing.
I shot rounds through the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol but as I mentioned before I believe the CO2 valve was messing with the guns performance, so what was happening was some shots would get full Co2 and work fine while other shots only got a portion of the CO2 which did not allow for the blowback action to fully cycle and caused the internal hammer to not get set in the full cocked position. I did get about half of my shots to hit the target but my results where not what I would expect from the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol. It is more than capable of getting at least a 4 inch group from 30 feet out so don't take this particular test to seriously.
After tearing down my camera gear I decided to load up another CO2 into the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol and shot several magazines through it. This did seem to fix the problem and which leads me to believe that I simply needed to work this gun in a little bit. Out of the box Airguns can have some machining materials in them that can cause performance issues as I believe was the case for the ASG Bersa BP9CC CO2 Blowback Airsoft Pistol. Luckily I was able to get mine working properly!
