I am showcasing here on the Replica Airguns website and over on the Replica Airguns YouTube channel a series of videos I will be making for the purpose of selling some guns out of my personal collection. I simply have no more room for the new guns and in some cases I either have duplicate guns or very similar versions so there is no need to have both. Some guns I am less attached to and as I already stated I need to make room for some of the new stuff I will be reviewing and or buying for myself.

In this second Mike's Personal Guns For Sale video I am offering three rifles, two of which will require a Canada PAL Firearms License since one is a 22LR rimfire rifle and the other is a high powered .22 caliber break barrel pellet rifle. The last item up for bid is an AK-47 styled .68 caliber paintball rifle.

Make sure to watch my above YouTube video to see these three rifles I am selling and instructions on how you can take part in the sale and purchase of them. By the way I am only selling to Canadian residents since shipping cross borders is a little sketchy.

Here is a list of the these three rifles I am selling from my personal gun collection:

ISSC MK22 22LR (FN SCAR) Rifle - $625 PAL Required

Benjamin Sheridan Super Streak .22 Caliber Break Barrel Rifle $250 PAL Required

Tacamo T68 AK-47 .68 Cal. Paintball Rifle $275

With the popularity of the KWC - Cybergun 1911 Blowback CO2 Pistols and how super realistic they are in so many ways, it is no surprise that people often ask me if they can replace the original grips with grips made for a real 1911.

The short answer is yes you can! You will have to be prepared to remove just a little bit of material from the backside of both grips near the bottom of the handle where there is an area that has been flared out to accommodate the CO2. Not really a big deal, you can use a Dremel for the quick and easy approach or even some sand paper if you don't mind taking a little more time.

In this Vimeo Video I demonstrate using grips that fit a real 1911 and show you just exactly where you will need modify them to fit on the KWC and Cybergun CO2 Blowback 1911 pistol series.

Buy the KWC Blowback CO2 1911 BB Pistol in Canada

I'm getting close to uploading 600 videos now over on the Replica Airguns Vimeo channel, so there are bound to be a lot of similar questions and popular discussions. In this Replica Airguns Vimeo Video I address what I feel are my Top 10 Most Common Airgun Questions and Discussions.

1. Can I shoot my CO2 gun without CO2? (1:00)

2. Can I refill CO2 Cartridges? (2:08)

3. Will XYZ BB gun kill a bird, rat, rabbit, gopher…? (3:33)

4. Can I shoot Airsoft BB’s in my BB gun? (5:58)

5. Can I use my Airgun for self defense? (7:47)

6. Do Airguns & blank guns have recoil? (10:42)

7. Why play around with Airguns, just buy a real gun?(12:50)

8. Can I have a free gun? (17:15)

9. Which gun should I get? (19:10)

10. Mike, can you do a review of such and such a gun? (20:05)

Whether you like it or not, most of us have come across an Airgun with an ugly orange tip on it at some point. In most cases you will find the intrusive orange or red tips on Airsoft guns that shoot plastic BB's, in some cases you will even find them on Airguns that shoot either lead pellets and/or steel BB's.

It really comes down to where you live as to what your local gun laws have determined is required for your area. You may even live in a region where Airguns and Airsoft guns are not allowed at all! So for you a red or orange tip on the front would be welcome if it would allow you to own an Airgun or Airsoft gun. What about the entire gun being painted a bright color, well that is the case for some folks so again having a red or orange tips may not be as bad as it originally seemed...

In Canada where I live, we used to only be allowed Airsoft guns that had clear sections as our replica gun laws are very strict and all black Airsoft guns would have fallen iinto the "replica" category if they did not have large clear plastic see-through sections on them. This clear section law was revised somewhat over the last several years to allow for all black Airsoft guns here in Canada. It was determined that many Airsoft guns with higher fps limits could cause a serious injury to a human, making them less of a toy in the eyes of the law and more of a weapon. Because of this, Airsoft guns that are capable of shooting a .20 gram plastic BB at a velocity of 360 fps or "higher" are now considered to be similar in the eyes of the law to a regular steel BB or lead pellet shooting Airgun. In Canada, Pellet and Steel BB guns are actually considered firearms of a sort so this allows the higher fps Airsoft guns to be all black since it can not be a replica of a firearm if it is in fact considered to be a firearm by law.

The long and short of all of this is that here in Canada we do not require our Airsoft guns to have orange or red tips since they are considered more or less to be just like any other Airgun and our Airguns do not have red or orange tips either.

Getting back to the title of this article "No Orange Tip On Your Airsoft Gun! Are You Insane?" I often get folks from the US giving me heck for removing the orange tips from my Airsoft guns or asking me why my Airsoft guns don't have them in the first place. These people even state that I could get in a lot of trouble for this! Perhaps they think I live in the US or that US laws govern Canada as well? I am not sure but I can say for the record that I am not breaking any laws at least here in Canada where I live.

I know in the US that wholesalers and retailers by law have to sell Airsoft guns with the affixed orange tips on them, once the end user receives that gun and depending on which state they live in, it may or may not be legal to remove the orange tip. Again, you will need to look into your local state laws as they are different from state to state in the US.

What is a Blank Gun?

The best way to describe a Blank Gun is to imagine it as a real gun in just about every way except one… There are no dangerous bullets flying out the front of it. That’s right, a Blank Gun just like a real gun uses a brass or metal shells, loaded with a primer and gun powder, but for what ever reason reason, some rocket scientists forgot to put a bullet at the end of the Blank shell. 

Why Would You Want a Blank Gun?

Isn’t the entire purpose of a gun to shoot something? So why on earth would you buy a gun that doesn't  shoot anything at all, what purpose would it serve? Even Nerf guns, water guns, potato guns all shoot something…

One way to look at a Blank Gun is to imagine it as a cap gun, but for grown ups. Similar to how kids like to shoot their cap guns because they go bang and sparks and smoke fly out of them, Blank Guns do the same thing but on a much grander scale and in most cases they look and sound a lot more like a real gun than a cap gun does.

So Blank Guns don’t actually do the main function of a real gun (that is to shoot a bullet), but they do look and sound the part of a gun. So how could this be of practical use to anyone?

Signalling Devices:

First off, have you ever heard of a Starter Pistol or a Flare Gun? Blank Guns have been historically used to signal the start of races. Many Blank Guns also have the ability to shoot flares by adding a flare adaptor to them so a person can shoot a flare into the air to signal distress if they are lost or hurt.

Gun Handling and Training:

Since many Blank Guns look, operate and feel almost exactly like real guns, Blank Guns are a great place to start out when training a person on proper gun handling and operation. If they make a mistake while using a Blank Gun, the consequences are far less severe than with a real gun. There is also much less kick from a Blank Gun so shooting a Blank Gun is less scary or intimidating for new shooters.

Dog Training:

Dogs used for police, military and hunting are required to stay calm around loud noises like gun shots, trained dogs also need to get used to the presence of guns and even how to attack the gun hand of a person who could be a potential threat. Again using Blank Guns in this training situation is a much better option than using a real gun for obvious reasons.

Movies, Video TV and Stage:

Introducing live ammunition on a movie set would be ridiculous, there is absolutely no need to shoot a bullet in this type of situation. Blank Guns make perfect stage props since they again look the part and sound the part without the dangerous bullets flying all over the place…

Collectors:

Many collectors want to own guns but for reasons like gun restrictions in their area, they may not be able to own a real gun or certain types of real guns. Blank Guns can offer a person with heavy gun restrictions in their area the ability to own similar Blank Gun versions. Perhaps they can own real guns but just simply don’t want to go through the licensing and registration hassle of owning a real gun. Blank Guns can generally be purchased for far less money than a real gun which is appealing to collectors who in many cases may not even shoot them.

Celebration:

In places like Turkey, people celebrate holidays and events by shooting Blank Guns into the air, at one time they actually shoot real guns, but people where getting injured or even killed by the falling bullets. Because of this, Blank Gun production became an industry in places like Turkey as Blank Gun manufacturers like EKOL, Retay and Zoraki (also know as ATAK Arms) are Turkish companies.

So now you know some of the reasons why a person would want to own a Blank Gun. I have Blank Guns and I also own real guns too. One reason is because there are many Blank Guns I own that I can not own in their real steel versions because of Canadian gun restrictions so obtaining a similar version in a Blank Gun allows me to own these models.

If a Blank Gun is not for you, then by all means get a real gun, but please understand that there is a place for Blank Guns, and in those environments, a Blank Gun is actually a better choice than a real gun.

Type: BB air pistol.

Manufacturer:Baikal.

Model: MP-654K.

Materials: Weapons grade steel slide, frame and most parts.

Weight: 1.7 pounds.

Barrel: 3.8 inches, metal-rifled.

Propulsion: CO2 x 1.

Action: Semi auto, double and single action.

Ammunition Type: Steel/Lead BB's 4.5mm.

Ammunition Capacity: 13 rounds.

FPS: 380.

Trigger Pull: The trigger pull on the 2013 Blued Baikal Makarov MP-654K CO2 BB Pistol is good in single action mode (When cocked), when shooting in double action mode it is a bit heavy but it seems like over time the gun is working its self in a bit as the metal is hard and as with many Russian made guns, they need some break in period. The trigger springs are heavy so don't expect light trigger pulls.

Accuracy: The accuracy and true feet per second performance will be tested when I do my future Field Test Shooting review.

Build Quality: Excellent, the Baikal Makarov MP-654K CO2 BB Pistol is made side by side using the same machine sand same materials as the original Makarov PM (9x18) firearm that it is Replica of. There simply is not another airgun made to this quality level or that is as accurate a replica of it's real steel version.

Realism: You simply can not get any closer to how close this gun resembles the original Makarov PM (9x18). You can even field strip this gun exactly like the original. The only acceptation is when it come time to fire the BB gun version, The Baikal MP-654K is not designed to have blowback operation which is understandable as it would be impossible to fabricate this gun so close to the original and still give it blowback operation.

Pros:

• All Steel construction

• Made side by side in the factory to the real steel version with same build quality and on same machines.

• The closest BB gun to a real gun you can get in terms replicating the parts and being made out of the same materials as the real version.

• Can filed strip like the real version.

• New 2013 version has recessed barrel.

• New 2013 version has the flush CO2 screw.

• New 2013 version is the PM style with narrower handle and PM grips.

• Can field strip like the real version.

• Shoots in single and double action.

• Safety works as a de-cocker.

• Made in Russia!

Cons:

• Expensive compared to other airguns.

• No blowback operation.

• Only a 13 round magazine.

• Gun requires some breaking time.

Comments:

The new 2013 Blued Baikal MP-654K PM Styled BB Air pistol is one of those must have airguns if you are a collector, sure the price is a lot more than most airgun replicas out there but the 2013 Blued Baikal MP-654K is built like no other airgun. Rather than creating a replica gun around existing airgun parts, Baikal takes a different approach and reworks a real Makarov backwards so it is made to shoot steel BB's using CO2 rather than 9mm rounds. You could say it is a real Makarov but chambered to shoot steel BB's and use CO2. These guns are rarely available in Canada since they often get stuck in customs because they are so realistic. I was actually very surprised when we located a secure that had some that they where willing to give up!

My Vimeo Video Review for the 2013 Blued Baikal Makarov MP-654K CO2 BB Pistol:

Buy the 2013 Blued Baikal Makarov MP-654K In Canada

It has been way too long since I got to go to the gun range and shoot my "big boy" guns! I say that sarcastically, sure my real steel guns are fun to shoot but it sure costs a lot of money and basically all we really do is shoot paper targets. Shooting at papper targets is fun for a while but I kind of enjoy shooting my airguns at pretty much any type of target I choose to shoot at. And of course any time I want to and for pennies per shot.

So getting back to Range Day shooting my real steel big boy guns ;) I went with a couple of buddies of mine and we shot a nice variety of guns. My Norinco NP-30 double stack 45 cal 1911, my Wyoming Arms Parker 10mm, a couple of my friends Glock 40 cals, my Norinco NP-34 P228 and Norinco Tokarev Type 54 9mm pistols, my Chiappa 1911-22 and ISSC M22 22LR pistols, a nice Sig Mosquito 22LR, my buddies S&W M&P 15-22 22LR rifle along with my ISSC MK22 SCAR 22LR rifle and my friends mighty custom Ruger Mini 14 in .223 caliber...

It was a cold day but a really fun day and it gave me a chance to really use my iPhone 6 plus camera for its slow-motion capabilities in a decent lighting situation.

Enjoy the footage of these "real guns" shooting in real time and slowed down.

If you have been watching my Full Auto Fun Videos, then you will have noticed that I have recently been using Clay Pigeons as my go-to targets. Generally Clay Pigeons are shot from launchers and used with shotguns since the flight of the Clay Pigeon simulates a bird in flight nicely.

So I thought, why not use them as reactive targets for my Airguns and Airsoft guns? It turns out they work pretty darn good, well at least with 4.5mm Steel BB pistols and I would imagine even better with pellet guns. What about Airsoft guns, will the Airsoft lighter weight plastic BB's have enough mass to get the job done?

You'll have to watch this video to find out the answer to that question when I unload a full magazine of .20 gram Airsoft BB's into some Clay Pigeons using my KWC .50 Desert Eagle...

Buy KWC Airsoft Desert Eagle in Canada

Buy KWC Silver Desert Eagle in Canada 

This Article and Video expresses my views and opinions on this matter and should not be taken as legal advice.

Main points covered:

• Uncontrolled Firearms do not require a Firearms License within Canada to own and operate.

• What is an Uncontrolled Airgun and Airsoft Gun?

• What is an Uncontrolled Blank Gun / Starter Pistols?

• What about Fully Automatic Airguns and Airsoft Guns?

• What about Replica Guns?

NOTE: Controlled Firearms require a POL (Possession Only License) , PAL (Possession Acquisition License) or R-PAL (Restricted Possession Acquisition License) within Canada to own and operate. 

MEMORANDUM D19-13-2

Firearm – a barreled weapon from which any shot, bullet, or other projectile can be discharged and that is capable of causing serious bodily injury or death to a person, and includes any frame or receiver of such a barreled weapon and anything that can be adapted for use as a firearm.

“Uncontrolled”firearms are those devices that, although falling within the definition of a firearm in the Criminal Code, are exempt from specific legal requirements of the Firearms Act and its regulations, as well as from other legislative provisions. “Uncontrolled” firearms should not be subdivided into any of the non-restricted, restricted, or prohibited classes. The following types of firearms are deemed “uncontrolled”:

Flare, blank, rivet and industrial guns: Any device that is designed exclusively for signaling, for notifying of distress, or for firing blank cartridges or for firing stud cartridges, explosive-driven rivets or other industrial projectiles, provided that the importer intends to use it only for the purpose for which it is designed.

NOTE: (Toy guns and starter pistols do not generally qualify as firearms. However, some toy or model guns and starter pistols may be designed with very realistic mechanisms or appearances (e.g., color, size, scale, translucency) and resembling a real make and model of a firearm. In such cases, they may be considered replica firearms even if they are made of plastic, die cast zinc, or other material.)

Low muzzle velocity/energy guns: Any barreled weapon that is not designed or adapted to discharge projectiles at a muzzle velocity exceeding 152.4 meters per second (500 feet per second) and at a muzzle energy exceeding 5.7 Joules, or to discharge projectiles that are designed or adapted to attain a velocity exceeding 152.4 meters per second (500 feet per second) and an energy exceeding 5.7 Joules. Both thresholds of 152.4 mps and 5.7 Joules must be exceeded for the firearm to be considered “controlled”. This requirement exempts firearms that fire below the threshold velocity with a standard projectile, but exceed the threshold velocity when fired with a high-velocity projectile. 

Airsoft guns and certain types of paintball guns or markers may qualify as a replica firearm, if the muzzle velocity of the projectile does not cause serious bodily harm and their external features are clearly designed to resemble a specific and readily identifiable make and model of a firearm. To be considered a firearm, within the meaning of the Criminal Code, an airsoft gun must have a muzzle velocity in excess of 111.6 meters per second (366 feet per second).

NOTE: This memorandum used to state when using a .20 gram BB but does not specify this BB weight anymore?

NOTE: The term air gun is a colloquial term referring to BB or pellet guns. Such guns operate either as spring- powered, gas-powered, or electrically powered. If the muzzle velocity of the air gun is less than 152.4 mps (500 fps)/5.7 joules but still able to cause serious bodily injury to a person, it may be considered an “uncontrolled” firearm. Airsoft guns and certain types of paintball guns may qualify as a replica firearm (see paragraph 49 of this memorandum).

Replica firearms:

“Replica firearm” is defined as any device that is designed or intended to exactly resemble, or to resemble with near precision, a firearm, and that itself is not a firearm, but does not include any such device that is designed or intended to exactly resemble, or to resemble with near precision, an antique firearm.

For a device to be a replica firearm it must meet all three requirements:

• (a) it cannot be a firearm, meaning it does not discharge a projectile with sufficient energy to cause serious bodily injury or death to a person. If the device is a firearm, then it cannot be a replica firearm (and vice versa);

• (b) it must resemble exactly, or with near precision, a real existing firearm of an identifiable make and model. With respect to visual examination, note that the maximum observing distance is one at which the equivalent make and model of the firearm can be identified. This distance will vary from one firearm make to the next. For example: A Luger pistol has a very distinctive silhouette as compared to other makes and is therefore more readily identified from further away. The examination of the object is something more than casual, but less than detailed. The device does not need to be so close that markings are identifiable; and

• (c) it cannot be designed or intended to exactly resemble, or to resemble with near precision, an antique firearm. 

RCMP Website "Air Guns"

1. Air guns that are "Controlled" Firearms for purposes of both the Firearms Act and the Criminal Code

These are air guns with both a high muzzle velocity (greater than 152.4 meters or 500 feet per second) and a high muzzle energy (greater than 5.7 joules or 4.2 foot-pounds). The "muzzle velocity" is the speed of a projectile at the instant it leaves the muzzle of a gun, normally expressed in meters per second or feet per second. The "muzzle energy" is the energy of a projectile at the instant it leaves the muzzle of a gun, expressed in joules or foot-pounds. Air guns need to meet both standards to be classified as "Controlled" firearms for purposes of the Firearms Act.

These high-powered air guns are subject to the same license and registration requirements as a conventional "Controlled" firearm. Owners and users are also required to store, transport, display and handle them safely in accordance with the regulations supporting the Firearms Act.

Usually, the manufacturer's specifications are used to determine what muzzle velocity and muzzle energy an air gun was designed to have. This information may be available in the user's manual or on the manufacturer's website. If the information is not available, individuals can call the Royal Canadian Mounted Police Canadian Firearms Program (CFP) at 1-800-731-4000 and ask to speak to a firearm technician to find out if the air gun is considered to be a firearm for purposes of the Firearms Act.

High-powered air rifles are generally classified as non-restricted firearms. However, the classification depends on the exact design of the air gun. Air rifles manufactured to resemble an assault rifle could be non-restricted, restricted or prohibited depending on the exact model imitated. High-powered air rifles would also be prohibited firearms if fully automatic or if they have a sawed-off barrel. They could also be restricted firearms if they have a folding stock that reduces the overall length to less than 660mm. 

Additional thought on this subject: Even though Uncontrolled Firearms are not governed by the same laws that apply to Controlled Firearms within the Firearms act and do not need to be handled or stored similar in the same way you are required to handle, transport and store a Controlled Firearm, we need to treat our Uncontrolled Airguns, Airsoft Guns and Blank guns with care and go over and above what is expected when had handle, transport and store them.

A very common occurrence with CO2 Airguns and Airsoft guns are leaky CO2 seals. Usually this occurs right where the CO2 cartridge connects to the main valve area. This can be either in the gun or in the magazine depending on the setup of the airgun.

There are many reasons why this can happen, but the most common reasons are a worn-out or dried up seals or even a seal that has been imprinted or misshapen from the constant pressure of the tip of the CO2 pressing against it.

When this happens you may encounter a leaking CO2, the severity of the leak can vary from mild slow leaks to leaks that can be so bad that the gun is unusable. Keep in mind there can be other problems not related to the CO2 seal such as in the valve area, the fix I show you in this YouTube video will not fix a leaking valve, you can try using something like Crosman Pellgun oil for a problem like that.

Watch my below Vimeo video where I show you how you can easily use some Plumbers Teflon Tape to improve the contact points between your CO2 and CO2 main seal and eliminate leaking CO2 in your Airgun.

A very common question I get asked is "How Long Can I Leave CO2 in My Airgun?" So what do I do when I get asked a question over and over again... Well I make a video and give you my answer to the question.

Some CO2 Related Questions I seem to get over and over again are:

1. Can I leave an unused CO2 in my Airgun and for how long is it safe?

2. Can I reuse a C2 once it is empty?

3. Can I use my gun without CO2?

In this YouTube video I address questions 1 and 2, I kind of forgot about question number 3 since it is not as often but it does come up from time to time believe it or not and the answer to being able to use a CO2 airgunwith out CO2 is "NO", It's kind of like trying to drive a car without gas, or turn on a light without electricity or stay alive without food...

So anyways, watch my below Vimeo video for answers to questions one and two:

This may be a bit controversial for some people who don't like the thought of using an gun for hunting or extermination of unwanted pests. But weather or not it is accepted by all, it is a practice that many people still embrace including myself when done in a humane way.

Let's start off by addressing this topic by asking some questions and filling in some of the answers. Keep in mind I go into much more detail in my Vimeo video below.

What is the reason that you need to Shoot or Hunt an Animal?

Are you shooting an animal out of need or just for fun, sure there is a thrill in the sport of hunting but after taking down your prey, the animal should not be killed in vain as the meat should be eaten. There are also times when pesky critters get into your gardens, tree farms, feeding stations garbages and who knows what else? I personally think shooting an animal that has not done you any harm or that you don't plan on eating is not ethical. So question your motives wisely?

Can you use an Airgun for Hunting and or Pest Control?

The short answer is yes! As long as you choose the correct Airgun for the job, one that has enough power and accuracy to get the job done in a humane manner. Using an underpowered or inaccurate gun of any type for the chosen target will lead to the animal being wounded and possibly getting away to suffer unnecessarily.

What about Pistols versus Rifles?

Given the choice, a rifle will always be your best bet, rifles tend to be more accurate since they are more stable to hold and the fact that the sights are further apart which improves the guns accuracy. Most rifles also allow for enhanced sighting systems like red dots or magnified scopes for even further accuracy improvements. There are some pistols made specifically for hunting and target shooting that can be accurate but I would limit their use to shorter ranges.

What about Pellet guns versus BB guns?

BB guns in general are not meant for hunting or pest control, and in most cases they are underpowered and not as accurate as their pellet shooting counterparts, especially out at longer ranges where most pests keep their distances to. If you plan on doing some hunting and or pest control, please invest in an adequate pellet rifle to get the job done humanly.

What type of Ammo is best for Hunting and Pest Control?

There are lots of types of pellets available, pointed, rounded, flat, hollow-point and even pellets that have nylon tips. At the end of the day, use the pellet that is the most accurate in your Airgun because shot placement will win over pellet shape any day of the week. The reality is that as long as that pellet hits the target with adequate velocity, it doesn't matter what shape it is, it's more than likely going to pass right through the animal.

What is the lowest FPS that I can use?

I would rather ask the question, what is the highest fps I can get away with since more fps will give you more margin for error, since it will have a flatter trajectory and will do more damage even if your shot is off a bit. An experienced shooter could make a kill shot on a small pest even with a 400 fps airgun but the shot would have to be perfect and the range would have to be close. Of course when shooting larger game, you will need larger caliber pellets with higher velocities. Also when using a high velocity airgun you need to consider what is beyond your target, if you miss, where is that pellet or bullet going to end up? You need to make sure you do not injure anyone by mistake as pellets/bullets can travel a long distance.

How large of an Animal can an Airguns Kill?

This is really dependent on the Airgun being used, Airguns come in many different calibers, from .177 right up to .50 caliber, some PCP Airguns can even take down a deer! You need to do your research and make sure the Airgun you choose has both the power and accuracy you need for the intend prey.

Where can I use an Airgun for Hunting and or Pest Control?

This is a question you need to ask your local authorities as laws and hunting regulations are different just about everywhere. Even shooting pests on your property may require a permit so be careful to obey your local laws.

Is an Airgun Good for Self Defense? Another one of those questions I get asked fairly often that's a bit hard to answer in a few sentences... Not all of us have easy access to a 9mm pistol or even a rifle but many of us can get our hands on an airgun fairly easily and they look real enough, I guess that is one thing they have going for them.

But what if the mere sight of what looks like a gun does not scare an intruder off? If you where hoping that would be enough, you may just be out of luck and what if you just brought an Airgun to a "real" gun fight? You are going to be drastically "outgunned" pun intended and here's why. A 4.5mm Steel BB weighs about 5.1 grains and generally you are looking at about 2-3 foot pounds of energy from a CO2 BB gun. Even a .177 caliber lead pellet is only marginally heavier at around 7-8 grains and if you're really lucky you might just get 4 foot pounds of energy out of a CO2 pellet pistol.

So let's take a look at a fairly conservative "real pistol" rounds, the 9mm. The 9mm rounds come in different bullet weighs but you can get a 120 grain 9mm in a plus p ammo with as much as 400 foot pounds of energy and even with that much raw power, many people claim that a 9mm round does not always have enough stopping power to put down a person even when shot multiple times center mass. It just depends what vital organs or arteries you hit that determines if he gets lucky or you get lucky.

Your 5.1 grain 4.5mm Steel BB is not going to do anything if it hits any type of clothing and even if you find some flesh it's just going to piss off the intruder.

My suggestion is to consider a bat or a golf club or a really big knife or just about anything other than an airgun because if the sight of the airgun replica does not scare an intrude away then you are really buggered.

Keep in mind that you need to abide by any laws regarding the use of self defense in your areas. Even just physical force could be considered a crime and at the end of the day you are ultimately accountable for your actions.

In many of my reviews I show the loading process of each gun but sometimes I either skim over this part or assume most people already know how to load an Air Pistol and skip it entirely. Well as it turns out not everybody does know how to load up an Airgun or they are unclear on certain areas, like do you actually need the CO2 and how long can you leave CO2 in an airgun?

So I made a video specifically to cover how to load CO2, BB's and/or Pellets into your Air Pistol.

Now even though this video is targeted at 4.5mm Steel BB and Lead Pellet Pistols, there is a crossover with 6mm Airsoft Pistols so this video may also help an Airsoft shooter.

Our Family Bearded Dragon (Dijon) was looking rather sad and lonely today so I figured he could hang out while I made the video, he really doesn't do much of anything most of the time so why not give him a special appearance in one of the Replica Airguns Videos ;)

Two questions that come up over and over again and to be honest I just hate answering, mainly because both of these questions to me are kind of common sense questions. I feel if someone where to stop and actually think about teh question, the answers would become obvious.

That said, common sense has to be learned somewhere and not all of us are exposed to the same life experiences so here goes...

The two questions are:

• Will this Ammunition Work in my Gun?

• Can I Convert a Blank Gun to a Real Gun?

The answer for both of these question is actually the same! Use the ammo made for your gun and do not try to use anything other than the ammo that was made for your gun. Do not try to modify your gun to shoot anything other than the ammo that was made for it, if you do, you may be breaking the law and could land yourself in jail. If you can follow these rules then your ammo and gun will work as intended :)

So that's pretty much it in a nutshell, watch my YouTube video below as I show you examples of ammo types with visuals on exactly why you need to use the ammo made for your gun. I also talk about the dangers of attempting to modify a blank gun to shoot some sort of real bullet and why it is a very bad idea in so many ways to try and convert a blank gun into a real gun.

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the Canada Store

Buy the ROHM RG-88 9mm P.A.K. Blank Pistol in the US Store

This video should go "Hand in Hand" (pun intended) with my Best Two Handed Pistol Grip Tutorial Video that I did last year back in August. After that video I had several people ask me to talk about how to aim a gun. I guess if you have been shooting guns for a while you kind of take it all for granted but after teaching my kids the proper way to aim a gun at a target, this info is not naturally born into us ;)

This video demonstrate how and where to place your open gun sights on a target and also how you can compensate for a gun that may not be perfectly sighted in.

This is take 2 of my Modification to my F1 Chrony Chronograph. The purpose of this modification is to improve the low light FPS readings. In my first attempt I used LED Puck Lights but they where the kind that used flat panel LED's and they only had 4 panels per LED Puck which made each LED panel kind of bright. I did get OK with my first mod using LED Puck Lights but not as good as I would like to see.

So here we are with take 2 of F1 Chrony Chronograph LED Puck Light modification and this time around I am using standard bulb styled LED lights and to improve my chances of this working I went with and LED Puck that contained 24 LED bulb lights per puck, this way each light on it's own is a bit dimmer which I feel will give a more diffused lighting effect and hopeful consistent fps readings.

By the way I got these LED Puck Lights at my local dollar store for $2.50 each so not a very expensive modification, especially if they work.

Well... Watch the video and see how they perform...

This video was made to show you the results I got by mounting LED puck lights to the top of my F1 Chrony Chronograph defuser panel in order to improve the low light Feet Per Second readings when using 4.5mm Steel BB's.

I have been struggling with my F1 Chrony Chronograph during the fall and winter months as tit becomes overcast and dark where I live. There have been days where I have gone out to shoot my field test shooting video and not been able to get any Chronograph fps results which is very frustrating because much time and effort goes into the planning setup of each video.

I was given advice from several of my viewers to mount an LED puck style light on the back side of my Chronograph defuser panel and that this helps the Chronograph to read much better in low light situations.

I bought a multipack of the LED puck lights from my local Costco but they did not work as well as I expected them to as they had a panel style of LED rather than the bulb shaped LED which I think may diffuse the light a bit more. My next experiments will be done using LED Puck lights but with the bulb styled LED.

You can watch my video to see how my first attempt using an LED Puck light with my F1 Chrony Chronograph worked out.

As promised I did a redo of my Original Chronograph Test for my Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol. The first time around I just could not get my Chronograph to read in the poor lighting I had going on that day. I spent a fair bit of time doing some testing with my Chronograph since it is that time of year when the lighting is poor and determined that I need to use the white defusing panels as it seems that my roofline and the low light are playing havoc with the Chronograph readings.

Once I sorted this all out my Chronograph worked perfectly and I was able to get some readings for you with my Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol. As I assumed I did not get much over 350 fps. I also got a lot of variation in the fps, most likely due to the fact that I had to roll down the pellets a bit on the backside in order to feed them in the barrel from front to back, some pellets where tight and some where a bit looser, the looser ones seemed to shoot a bit faster as less of the pressure may have escaped out the back where the primer was situated.

It's a bird, it's a plan, no wait... It's a pellet gun, no it's a cap gun, or is it a blank gun or maybe it's a real gun? Well it shoots lead bullets out of the barrel using gun powder so who really know's what we should call it? At least here in Canada you don't need a license to buy or own the Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol so that's a good thing :)

If you have not already watched my Table Top Review for the Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol, make sure to do so to find out a bit more info on it since I don't go over too much in this Field Test Shooting Review.

So on with the Field Test Shooting Review results... Right off the top, I have no Chronograph test result, try as I did I could not get my Chronograph to read the pellet speed in the rather low light situation I had today, even with a bunch of added extra lights :( I would say off hand that it was shooting somewhere in the 350-450 fps range and when I do get a brighter day I will pop outside and shoot a couple rounds off and post the updated info here for you all, so check back in a bit if this interests you.

What I can tell you for sure is how this gun shot in terms of accuracy. I was expecting to spray pellets all over the target because there is no back sight on the Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol, there is just a post sight up front.  I was not even sure if I was going to get all the pellets on the paper. I even setup my target at the 20 foot mark just to be safe and as per usual I was using a semi-rested position by placing a sand bag to rest my hands on and then sitting on my knees in the back, pretty stable all around.

I started off the target test by aiming dead center but quickly found that I was shooting about 6 inches high, so my next 5 shots I aimed 6 inches below the bullseye and low and behold 4 out of 5 of the shots landed within 1.5 inches of each other. So I guess having a rear sight is over rated! If you can figure this gun out, the rifled barrel will direct each pellet straight and true so I think it really comes down to knowing how to line up the front sight with an imaginary rear sight and don't try to shoot really small targets far away. Once you get used to where to point the Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol, you should easily be able to hit a pop can out to 20-30 feet with no problems.

Of course you have to reload this pistol before each shot which consists of cocking the hammer, placing a pellet in the front of the barrel and pushing it to the back with the loading ram rod and then positioning a #11 percussion cap on the primer nipple. Not a rapid fire gun at all but you do appreciate each shot considering the work involved. I also found pre-rolling the back side off my pellets helped to reduce the rear diameter so that the pellets loaded into the barrel much easier. You may have to blow out some residue between each shot which is not something I would recommend with most guns but it's very clear that this pistol is safe since in order to see the barrel obstruction there would be no percussion cap loaded onto the gun.

The Pedersoli Derringer Guardian #11 4.5mm .177 Pellet Pistol is a very unique pellet pistol and actually kind of fun to shoot since it involves a bit of work for each shot and of course some hands on time to figure out exactly how and where to point it to get accurate target results.

Make sure to watch my second Chronograph Test where I was able to get some readings for you!