It's been a rather long time since I made an Airsoft Rifle Field Shooting Test video. I like to shoot a bit further out than 30 feet when using a rifle. Unfortunately the weather outside is getting really cold where I live so my testing will have to all be done inside the Replica Airguns Sea Can Airgun Range which only allows for about 30 feet worth of distance to my paper target. I figure if I can get a tight group at 30 feet than it shouldn't spread out too much at longer ranges!
Since the G&G ARP-9 and G&G ARP-556 have identical internals and similar barrel lengths I figured I only really needed to test one of them out so I picked the G&G ARP-556 AEG Airsoft CQB and put 5 shots through my Chrony Chronograph to get my Field Test Started. The G&G ARP-556 AEG Airsoft CQB shot a nice consistent 400 fps which is as high as I would want to go for indoor CQB type shooting. The BB's sure did get to my paper target quickly!
I followed my velocity testing with an accuracy test at 30 feet back using a rested shooting position, sand bag up front and sitting in the back. I first placed 10 rounds on my paper target in semi-auto and hit the 1.5 inch bullseye with every shot! I think this may have been a first for me using an Airsoft rifle? Of course I had to switch the G&G ARP-556 AEG Airsoft CQB over to full auto and see how she would perform. Since I was using an 11.2 volt bolt battery the rate of fire was crazy fast but even so in full-auto the bulk of the shots still hit the center bullseye cutting out a 2 inch hole in my paper target. The G&G ARP-556 AEG Airsoft CQB is a beast that I would not want to be on the receiving end of!
I'm pretty sure I found my go to AEG M4 styled CQB rifle, I'm not sure how you could beat the results I got shooting the G&G ARP-556 AEG Airsoft CQB. And if you're looking for a slightly lighter and less expensive version with the same performance then take a look at the G&G ARP-9 AEG Airsoft CQB.
First off make sure to checkout my Table top review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol, it really is a nice Beretta Airsoft copy, perhaps one of the best out there!
In the Field Test Shooting Video I perform my standard Chronograph and accuracy tests on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol. I put 5 rounds through my Chrony Chronograph using .20 gram plastic Airsoft BB's with a full propane filled magazine. My Sea Can indoor airgun range was warmed up sufficiently for a gas gun test but I found the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol did shoot a tad bit slower than the 330 or so claimed fps coming in closer to 300fps. Still totally usable for indoor airgun wars.
Moving onto my accuracy test I placed 10 shots on target 30 feet down range using a rested shooting position, sitting in the back and sand bag up front. This time I was impressed with how tight a group I got, I was able to get the bulk of the shots all within about three quarters of an inch with only two shots hitting just a little outside of this. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol was shooting a bit low for me but that can be easily corrected by adjusting the the internal hop-up to raise the shot placement up as required.
The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol has a somewhat relaxed blowback but has plenty to give some recoil feel. You will get at least a full 27 round magazines worth of shots from each gas fill, perhaps even two if you stretch out your shooting a bit.
Type: Gas Blowback Airsoft Pistol. Manufacturer: G&G Model: GPM92 Materials: Metal slide & frame. Weight: 2.24 pounds (1016 grams). Length: 8.9 inches total Barrel: 4.6 inches,Metal non-rifled smooth bore. Propulsion: Green gas or propane. Action: Blowback, single and double action. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 27 rounds. FPS: 350+ fps.
Trigger Pull: The trigger pull on the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is very good in both single and double action. Double action is a bit longer but not that much heavier when shooting in single action. Single action shooting is short, light and crisp as you would expect when shooting a real steel Beretta 92 style pistol.
Accuracy: I have not done my actual Field Test Shooting video review for the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol but I did get the chance to shot it quickly in my Sea Can indoor shooting range. Blowback felt good and accuracy seemed tight even though I was shooting free hand. I did notice the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol shot just a little bit low but I can adjust the hop-up slightly to account for it.
Build Quality: Like pretty much all G&G Airsoft guns, the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol build quality is right inline. Fit and finish where excellent and a lot of attention to detail was seen all over this Replica Airsoft Pistol. There is also some new gas valve technology from G&G that should significantly help with freezing in colder or fast shooting situations.
Realism: The G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol is an excellent replica of the real steel Beretta Mod. 92FS, the safety even acts as a working decocker. You'll also find 5, 10, and 15 numbered markings on the backside of the magazine that would normally indicate how many bullets are in the magazine, a nice touch for sure! Everything works pretty much the same as it would on a real Beretta M9 including the ability to fully field strip the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol.
Whirl Cylinder Valve system should expect to get decent amounts of shots per gas fill.
White dot sights front and back.
Comes with hard shell case.
Very detailed full size drop out metal magazine.
20mm rail for accessories.
Comes with high quality speed loader.
Safety also works as a decocker.
Threaded removable barrel tip for add on mock suppressor.
Cons:
Sights are non adjustable.
A little bit more expensive than some other Beretta M92 full blowback Airsoft pistols
Barrel opening not as recessed as much as a real 9mm would be.
Comments:
I would have to say the G&G GPM92 is one of the nicest Beretta Model 92FS Airsoft Pistols you are going to find out there. There is a ton of attention to detail for sure, You also get the hard shell case with included high quality speed loader and G&G's new Advanced Safety Release Valve and Revolutionary Whirl Cylinder Valve that help with freeze-up issues. You might pay just a smidgen more that some other similar Blowback Beretta M92's out there but I feel it is well worth it.
My Vimeo Table Top Review of the G&G GPM92 Beretta Mod. 92FS GBB Airsoft Pistol:
I just received some really nice G& G Airsoft guns to share with everyone, I have two CQB Styled AEG rifles and a fantastic Gas Blowback Beretta Mod. 92FS.
The AEG CQB AR or M4 styled rifles are similar in a lot of ways and are super compact and really well built. The G&G ARP-9 has a polymer receiver and hand guard while the G&G ARP-556 has a full metal receiver and hand guard. Both have good weight to them. You will also find Skeletonized PDW stocks and large crown flash hiders on both models along with M-LOK hand guards. Inside you will find upgraded ETU and MOSFET electronics.
Obvious difference are the 9mm style magazine found on the G&G ARP-9 versus the M4 styled high capacity magazine on the G&G ARP-556. You also get an ambidextrous safety sector switch on the G&G ARP-556.
Next I show off the G&G GPM92 Beretta Mod. 92FS Gas Blowback Airsoft Pistol. It comes in a high quality hard plastic case with a well made speed loader. If you place the magazine in the gun you will have room for two magazine in the hard shell case. The G&G GPM92 hold 27 roads in it's double stack magazine that has some interesting new features that help it perform much beet in cold environments and really boost green gas usage. G& G calls them the Whirl Cylinder Valve system and Micro gas filter. Both help eliminate free up in the gun when shooting fast.
The G&G GPM92 Beretta Mod. 92FS is really well made and shoot in double and single action and the safety even works as a decocker. For those looking to add a mock suppressor you will happy to know the G&G GPM92 has a threaded barrel tip.
In this Classic Legends Airguns comparison video I look at a number of different Classic or Legendary BB Airguns and compare them to each other to determine which one I personally feel is the best . My final choices are of course based on my own personal opinion and in this video I end up picking two as they where kind of each in their own class.
In this Revolver comparison video I look at a variety of different types of Revolver Airguns and compare them to each other to determine which one I feel is the best Revolver styled Airgun. My final choice is of course based on my own personal opinion.
In this comparison video I look at a variety of different Sig Sauer P226 Airguns and compare them to each other to determine which one I feel is the best Sig Sauer styled Airgun. Of course my choice may not be your choice :)
Another Airgun Shipping Container (Sea Can) Shooting video and for this indoor filed test I put the KWC - Cybergun M45A1 1911 CO2 Blowback Airsoft Pistol through its paces.
What I am super happy about is that my Chrony Chronograph seems to be working really well as I tested a pellet, steel BB and Airsoft pistol out today and every single round through my Chrony got a reading :)
Now back to the Field Test Shooting Review at hand... I started off by placing 5 shots through my Chrony Chronograph using a brand new CO2 with .20 gram Airsoft BB's and got a really consistent reading for all 5 shots with an average of 357. The lowest shot was 353 and the fastest shot was 364 so all shots where really close in velocity. The container temperature was a near perfect shooting temperature of 23 degrees Celsius which was ideal for optimal CO2 velocity testing.
During my accuracy portion of this Field Shooting Test. I used my new seated in the back and sand bag rested up front shooting position which is about 30 feet back from my paper target. I did notice during my Chrony testing that the Cybergun KWC Colt 1911 Rail Gun M45 A1 CO2 Blowback BB Pistol liked to shoot a bit high, perhaps the hop-up needs a bit of twerking? So for my accuracy testing I shot at the bottom ring of the target, this helped me get more shots on the paper for sure but the Airsoft BB's still moved around a bit vertically. I was able to get about a 4-5 inch 10 shot grouping which is totally acceptable for a close range Airsoft sidearm and in an Airsoft battle I would think even shooting at about 50 feet or so I could easily hit a persons mid section consistently.
The Cybergun KWC Colt 1911 Rail Gun M45 A1 CO2 Blowback BB Pistol has a ton of blowback kick to it and a super nice single action trigger like all the KWC 1911's The modern Tactical coloration and trimmings makes this pistol a great choice as a present day side arm. It's real looker for sure with performance to match!
Type: Blowback Airsoft Pistol. Manufacturer: KWC - Distributed by Cybergun. Model: Colt 1911 M45A1. Materials: Almost all metal. Weight: 2 pounds (907 grams). Barrel: Metal non-rifled. Propulsion: CO2 x 1. Action: Semi auto blowback, single action only. Ammunition Type: 6mm plastic Airsoft BB's. Ammunition Capacity: 17 round full size metal magazine. FPS: 340+ using .20 gram BB's.
Trigger Pull: The trigger pull on the Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol is what you would expect from a true single action 1911 styled pistol and typical to all the other KWC 1911's on the market. It has a short take up and then a nice light and crisp release. The working grip safety is a nice touch requiring your palm to be pressed against it for the trigger and hammer to operate..
Accuracy: At this point I have not shot the Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol, I imagine it should perform well considering it has adjustable spin-up or hop-up. According to the manufacturers claimed fps, we should get somewhere in the mid to high 300 fps range using .20 gram Plastic Airsoft BB's. I'll add this one to the list of airguns I need to field test review!
Build Quality: Most KWC built full blowback airguns are built pretty well with an almost all metal build and good overall fit but sometimes the finish can wear off a bit especially in the high points. The Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol seems to have a bit heavier finish on it. I looks really good and seems to be holding up well.
Realism: The Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol is a close replica of the real steel Colt 1911 M45A1 in almost every way other than the fact that it shoot s6mm airsoft BB's rather than 45 auto bullets :) The only real notable cosmetic difference I saw was the rail having less notches in it. Other than that it is bang on including the layered grips. Available From: The Replica Airguns Store.
Pros:
All metal construction - Good weight and solid feeling gun.
Nice heavy blowback action.
Very Accurate 1911 M45A1 styled replica.
True 1911 Single action trigger, excellent pull, very smooth and light.
Accurate trigger design and working grip safety.
Lots of tactical upgrades on this version (Tac style trigger and hammer, textured grips, ambidextrous safety, white dot sights, Rail for accessories)
Love the desert tan color and layered grips.
Cons:
Sacrifice fps and shots per CO2 because of the heavy blowback but worth it.
Finish on the Cybergun and KWC guns can were off on the high points a bit but some people like the look.
Comes with the orange tip (I took mine off).
Comments:
I have always been a big fan of the KWC line of full blowback airguns and this one is no exception. It's kind of interesting that KWC does not seem to make there own blinded out versions of these guns and that a company like Cybergun is distributing them? They do look really great and this entire line with all the variations and new models will for sure keep selling these airguns. And they don't just come in Airsoft versions, I will also be taking a look at some similar 4.5mm Steel BB KWC made airguns shortly!
My Vimeo Video Review for the Cybergun KWC Colt 1911 M45A1 CO2 Blowback Airsoft Pistol:
Last but now least to show you in this update video is the ASG CZ Scorpion EVO 3 A1. This product was developed by ASG in cooperation with CZ and is made to give the Airsoft Player the closest shooting experience they can possibly get to handling and shooting a real CZ Scorpion EVO 3 A1!
I've already done Table Top Video Review for both the ASG CZ Scorpion VZ61 and the ASG B&T BT5 AEG 6mm Airsoft Guns so make sure to checkout both those videos.
What I hav not done so far is make a Filed Test Shooting video for either gun since this winter has been rather brutal here in BC Canada. Today I did manage to get outside and put some rounds through both the ASG CZ Scorpion VZ61 and the ASG B&T BT5 AEG 6mm Airsoft Guns so at least I can report back to everyone on how they performed for me. Sorry still no actual shooting video as my outside time was kind of limited due to it still being cold, we are even expecting some more snow tonight and over the next few days and it's March!
Getting back to my preliminary shooting testing, the ASG CZ Scorpion VZ61 only shot a slight bit higher then 250 but it was the more accurate of the two AEG Airsoft Guns getting close to a 1 inch 10 shot grouping using my standard 30 foot back semi rested shooting position. It did shoot a bit low but perhaps a hop-up adjustment should fix that problem.
Next up I tested out the ASG B&T BT5 MP5 PDW Replica and it did have a little more power hitting closer to 300 fps but it was not as accurate as the CZ shooting a bit high and to the left with most shots within about 1.5 inches, still pretty decent from 30 feet back.
Overall both AEG Airsoft Guns where fun to shoot and when I did let them lose to shoot in full auto mode they performed as expected laying down a stream of Airsoft BB's till the mags where empty :)
Materials: Steel, aluminum and plastic (polymer) construction.
Weight: 3.22 pounds (1460 grams).
Length: 15.7 inches (398mm).
Propulsion: AEG.
Action: Full auto only.
Ammunition Type: 6mm Airsoft BB's
Ammunition Capacity: 90 round magazines (Comes with 2).
FPS: 360+.
Trigger Pull: The trigger pull on the RWA KG-9 AEG Airsoft Machine Pistol is what you would expect form an AEG pistol as it is basically an on/off switch. Since the RWA KG-9 AEG Airsoft Machine Pistol is full auto only it is not easy to shoot a single shot, it can be done with a very short trigger pull but even then you get the occasional multiple shot. The RWA KG-9 AEG Airsoft Machine Pistol like the real steel original version is full auto only and that's what makes it so fun!
Accuracy: I did get a chance to take the RWA KG-9 AEG Airsoft Machine Pistol outside and put some rounds through my Chronograph and down range at a paper target. I averaged just under 340 fps using .20 gram 6mm Airsoft BB's which is about perfect for this compact machine pistol. I also placed about 10 rounds down range 30 feet back using my standard semi rested shooting position while trying to shoot in semi auto and got a pretty decent 1.5 to 2 inch grouping that was a little high but well centered left to right. Elevation could be adjusted using the hop-up.
Build Quality: The RWA KG-9 AEG Airsoft Machine Pistol is really one of the best made Airsoft guns I have seen in a while, all the metal parst are going to be real steel or aluminum, not your standard zinc alloy found in most airguns these days. The full upper is stamped steel along with the 90 round magazines, the lower is plastic with a few aluminum parts here and there. The fit and finish is also excellent!
Realism: The RWA KG-9 AEG Airsoft Machine Pistol is a replica of the Swedish made Interdynamic KG9 Open Bolt SMP, not the ntratec Tec-9 which was the American version of the KG9. For the most part the RWA Airsoft version is exact with the exception of the barrel shroud being slightly longer to accommodate the 7.4v LiPo batteries.
Pros:
Lots of steel in this gun including full upper, barrel, pins and magazines.
Very high quality build with a solid weight and excellent fit and finish.
Fairly high rate full auto fire.
Comes with battery and two magazines.
Has almost perfect usable working rate of fire averaging around 340 fps with decent overall accuracy.
Working cocking handle.
Fully Licensed.
Cons:
No blowback but there is some recoil feel from the heavy spring action.
No semi auto mode, full auto only.
Sights are not adjustable, can only use hop-up to adjust elevation.
Limited on battery choices.
Comments:
The RWA KG-9 AEG Airsoft Machine Pistol is a really cool looking Airsoft gun, it is a bit larger than most hand guns but could still be used like one since it does not have a stock and can be used for similar shooting situations. The advantage is you have 90 rounds of full auto ammo at your disposal in a size format that is super compact and easy to manoeuvre. You also get some pretty decent power for longer range shooting and the accuracy out of the box at a variety of ranges is also really good. You could even use the RWA KG-9 AEG Airsoft Machine Pistol easily as a primary or even kick ass backup gun as it is super versatile.
Watch my Vimeo Table Top Review of the RWA KG-9 AEG Airsoft Machine Pistol:
This year at SHOT Show 2017 in Las Vegas, I found there wasn’t a lot of new Airgun products but as always there are some that stood out for me. If you want more info on each Airgun Company then make sure to watch my full interviews for this years SHOT Show 2017. So without prolonging this video any longer let’s get right into it…
Umarex Legends MP CO2 Full Auto German MP40 Replica Machine-gun:
What’s not to like about the Umarex Legends MP? It has lots of metal parts weighing in at 7.7 pounds, a 60 round steel BB magazine with a dual 12 gram CO2 system. You also get your choice of shooting either in semi auto or full auto at up to 400 fps. Personally the Umarex Legends MP was the most interesting Airgun at the show this year for me and I really think it is going to be a hit!
Umarex SA10 Blowback Pellet and BB CO2 Pistol:
Another interesting product from Umarex this year was the SA10, I am not really sure what it is exactly styled after, it’s more of a futuristic looking gun with slide venting and a thread barrel for adding a mock suppressor or compensator. What appealed to me most about the Umarex SA10 was the new magazine design that incorporates a full size drop out metal magazine with 4 rotary 8 round magazines that can be loaded with either pellets or BB’s. When you empty one 8 shot magazine you simply drop the entire mag out and swap your empty 8 shot rotary magazine for a full one. The SA10 has a nice weight of around 2 pounds and shoots up to 426 fps.
Sig Sauer ASP P320 CO2 Blowback Pellet Pistol:
Sig Sauer introduced their new Sig Sauer ASP P320 CO2 Pellet Pistol this year that will be replacing the P250. Like the P250 the Sig P320 has a metal slide and polymer frame but instead of a double sided 16 shot rotary magazine, the Sig ASP P320 has a newly designed and very unique 30 round belt fed magazine. That’s nearly double the capacity without having to flip the magazine around part way through shooting. It’s great to see innovations like this happening in the airgun market.
Crosman Remington 1875 Shell Loading CO2 Pellet and BB Revolver:
Crosman introduced their own Single Action Old West Revolver this year in the form of the Remington 1875. Like the super popular Umarex Single Action Army Revolvers, the Remington 1875 is also shell loading and uses 12 gram CO2. You have the option of shooting either Pellets or BB’s out of its smooth bore barrel. I expect the Crosman Remington 1875 Shell Loading Revolver to be another popular Old West Airgun Revolver.
Crosman PSM45 Single Shot Spring Powered BB Pistol:
The Crosman PSM45 at first glance may not seem that interesting, after all it’s all plastic on the outside and only shoots about 200 fps! On the plus side it kind of looks like a Glock and we all know how hard it is to find airguns these days that resemble a Glock. I also like the fact that there is no need for any CO2, and most springers out there look like springers while the Crosman PSM45 looks like a real semi auto pistol. The PSM45 even has pretty decent weight to it since there are lots of internal metal parts and a full size drop out metal magazine which was a real surprise in such an entry level low cost pistol. If you’re looking for a fun inexpensive replica plinker than the Crosman PSM45 should fit the bill. On a side not the PSM45 would also make a really great low cost prop since the slide does work and it has that full size drop out magazine!
ASG Dan Wesson 715 2.5 and 4 inch Shell Loading CO2 Revolvers:
The ASG Dan Wesson Revolver has always been a popular choice, and then the Dan Wesson 715 came out improving on the design by adding extra weight and smoothing out the mechanics. How do you top that? Well by giving us some more options like barrel lengths. You now have your choice of a 2.5, 4 or 6 inch barrel for the Dan Wesson 715 and of course you will be able to buy your 715 pick in 4.5mm Steel BB, 6mm Plastic Airsoft or .177 Caliber Pellet ammunition versions. My personal choice may be the 4 inch Dan Wesson 715 since it has the addition of an integrated accessory rail machined into the outer barrel for lasers or tach lights.
Gletcher M1944 Mosin Nogant CO2 BB Rifle:
The Gletcher M1944 Mosin Nogant CO2 BB Rifle is not a new replica gun this year but it has been a hard one to get your hands on. In fact up until SHOT Show 2017 I had never seen one in person and so the Gletcher M1944 is new to me. I was very impressed with the quality of the Gletcher M1944 Mosin Nogant, it has a lot of metal parts including the swing out bayonet and even the simulated wood stock looks like real wood. I even had to take a second look and ask before confirming that the stock is in fact plastic on the Gletcher M1944 Mosin Nogant. I am looking forward to reviewing this rifle in the future when I do finally get one!
Of course there where other interesting products at SHOT Show 2017 this year but those are the products that stood out the most for me. Again make sure to watch my full interview videos to find out more about all the new products at this years SHOT Show.
And finally my last Vimeo video from SHOT Show 2017 in Las Vegas! Sorry there is no Interview this time with KWA but I did talk a lot with the KWA folks over at SHOT Show this year and I even got to test out their Laser Targeting System designed to be used with several specifi KWA guns by laser-ammo.com.
Unfortunately we don't carry the KWA brand in the replica Airguns store, a few models sneak in when being distriubted by another company like ASG in the case of the ASG MP9. I would love to carry KWA Airsoft Products in the future since they really do make very high quality Airsoft guns.
KWA has a great selection of Airsoft pistols and rifles in both Gas Blowback and AEG formats. The quality reminds me of the KJWors Airsoft guns we sell in the Replica Airguns Canada Store, you can really feel the quality when you pick them up and hold them for yourself.
Another SHOT Show 2017 interview video, this interview is with Bob Li from ASG (Action Sport Games), Bob shares with me some updates to the super popular Dan Wesson 715 along with the reintroduced EVO Scorpion Inferno powered Airsoft Rifle. Bob finishes up with a new X9 Classic which is a Beretta M9 in 4.5mm Steel BB.
You may have thought the Dan Wesson 715 was already pretty much perfect as is so what could ASG to make it even better? How about different barrel lengths. ASG has introduce the Dan Wesson 715 in both a new 2.5 inch and 4 inch version. Both lengths will be hitting stores shortly and will come in .177 caliber pellet and 4.5mm steel BB options. 6mm Airsoft will be out later on. The 4 inch version also includes an integrated accessory rail machined into the outer barrel for those of you wanted to add items like lasers and tactical lights to your Dan Wesson 715.
Last year at SHOT Show ASG introduced the EVO CZ Scorpion 3 A1 Inferno powered Airsoft Rifle but is again reintroducing it this year since they decided to take their time and get it perfect before releasing it in stores this March. The EVO CZ Scorpion 3 A1 is Inferno powered using an HPA system with a custom chip set that allows for a three round burst option an empty magazine detection.
ASG has sourced out not just any 4.5mm Steel BB shooting M9, they are actually getting their new ASG X9 Classic built by KJWorks. KJWorks is known for their Airsoft guns and I have reviewed several of them to date. If you have been looking for a KJWorks M9 but would prefer it to be in 4.5mm Steel BB then the new X9 Classic 4.5mm Steel BB KJWorks M9 exclusive to ASG is where you can get one!
Materials: Mostly clear plastic exterior with metal magazine and internal metal parts.
Weight: 1.2 pounds (544 grams).
Barrel: 4 inches, metal non-rifled with internal Hop-up.
Propulsion: CO2 x 1.
Action: Semi auto, double action only.
Ammunition Type: 6mm Plastic BB's.
Ammunition Capacity: 16 round full size drop out magazine.
FPS: 360 (.12 gram BB's).
Trigger Pull: The trigger pull on the Umarex HK USP Clear CO2 Airsoft Gun is pretty light for a Double Action Only trigger and it will allow for some pretty quick rapid fire action shooting. The hammer is basically for show as the hammer is actually situated internally.
Accuracy: So far I have not had a chance to test the Umarex HK USP Clear CO2 Airsoft Gun out but I expect it to get around 300 fps using .20 gram plastic Airsoft BB's and with the internal hop-up it should also be fairly accurate. We will have to find out later on when I get outside and perform my Field Test Shooting Video Review.
Build Quality: My first impressions of a clear plastic gun are that it is going to be cheaply made but this is not the case with the Umarex HK USP Clear CO2 Airsoft Gun. For the most part it is exactly like the all black Steel BB version I already reviewed other than the clear plastic shell. Everything else about the Umarex HK USP Clear CO2 Airsoft Gun is the same and there is a lot internal metal parts including a metal barrel and breach and a full internal metal chassis. I would have like to have seen a metal trigger, hammer, safety and slide catch release.
Realism: The Umarex HK USP Clear CO2 Airsoft Gun is a fully licensed replica of the real H&K USP automatic pistol. Other than it being clear and having a red tip is an extremely close looking and accurate replica of the real steel version. It does not operate the same since it is non blowback and does not have a moving slide but visually it is a very good copy.
Relatively low cost gun, even less than the Steel BB version that is the same other than the clear plastic portions.
Nice full size drop out magazine that holds the CO2 and Airsoft BB’s.
Lots of internal metal parts gives decent weight to the gun even though much of the shell is plastic.
Rail for accessories.
CO2 screw is well hidden in magazine.
H&K licensing via Umarex.
Red dot sights are easy to see on most targets.
Should have justthe right amount of power for indoor CQB style Airsoft games.
Makes a good starter pistol for someone getting into the hobby that may not want a gun that looks too realistic.
Cons:
Being a clear gun obviously takes away from the realism but that is the point of this gun so as not be confused with a real gun..
Would have been nice if the magazine was metal like earlier versions of the HK USP.
Also would have been nice to see more metal parts like the hammer, magazine release, safety, and slide catch release.
Comments:
As I mentioned in my video of the Umarex P99 Clear Plastic Spring Airsoft Pistol, I can be a bit of an Airgun snob and I tend to stay away from the clear Airsoft guns since I like mostly metal guns with blowback operation. That said there is a place for these clear Airsoft pistols. The Umarex HK USP Clear CO2 Airsoft Gun other than being clear looks like a gun and shoots like a gun but will not be confused as being a real gun which can offer some more safety and less stress to all parties involved.
My Vimeo Video Review for the Umarex HK USP Clear CO2 Airsoft Gun:
Barrel: 3 inches, metal non-rifled with internal Hop-up.
Propulsion: Spring Piston.
Action: Single Shot, Single Action Only.
Ammunition Type: 6mm plastic Airsoft BB's.
Ammunition Capacity: 11 shot full size drop out magazine with 60 round reservoir.
FPS: 280 using .12 gram BB's.
Trigger Pull: The single action only trigger pull on the Umarex P99 Compact Clear Spring Airsoft Gun is a bit heavier than I expected since generally speaking single action triggers simply just need to release the hammer or striker. There is a little bit of take-up initially but then the release is fairly crisp, just a tad firm but since this is not an action shooter and a full rack of the slide is required to pre charge the internal spring, having a heavier trigger pull is not a big deal and did not seem to effect my accuracy in any way.
Accuracy: I didn't get a lot of shooting time with the Umarex P99 Compact Clear Spring Airsoft Gun but I can say it seemed to be shoot fairly accurately. I tested it out shooting on a paper target from 20 feet back using a non rested standing position. The Umarex P99 Compact Clear Spring Airsoft Gun did shoot a bit high and to the left but my 10 shot grouping was within 1.75 inches with the exception of one stray that shot a little more to the right. I was using .20 gram BB's but they did seem to get to the target pretty quickly and penetrate the paper fairly well. I would say they were traveling well over 200 fps.
Build Quality: The Umarex P99 Compact Clear Spring Airsoft Gun is about a $25 gun so you can't really expect too much in terms of quality materials but that said, the gun does feel solid and well put together. I had no issues shooing it and for the price you should get plenty of good use out of it.
Realism: The Umarex P99 Compact Clear Spring Airsoft Gun is realistic in terms of its shape, operation and even the Walther P99 licensing and trade marks. But as is expected being a clear plastic gun it falls short in terms of feeling and looking the part of a real gun. But that's kind of the point here, this gun is supposed to clearly look like and Airsoft gun and not a real gun including the orange red tip.
Super low cost and even come with an extra mag and some starter BB’s.
Full size drop out mags are nice.
All the parts feel pretty tight, does not feel hokey, even has some metal parts where they are needed.
Has a rail for accessories.
No CO2 required, just your Airsoft BB’s.
Walther licensing and Trademarks.
Slide stays back when out of BB’s.
Has internal Hop-up.
Has a floating barrel like the real steel version would.
Makes a good starter pistol for someone getting into the hobby that may not want a gun that looks too realistic.
Cons:
Is kind of on the light side at about half a pound.
The single action trigger is a bit heavy but works fine, you're not going to be shooting rapped fire with this one anyway.
Being a clear gun obviously takes away from the realism but that is the point of this gun so as not be confused with a real gun.
Shoots a bit high and to the left.
Comments:
Right from the get go I was not expecting much from the Umarex P99 Compact Clear Spring Airsoft Gunbeing a bit of an Airgun snob and personally tending to stay away from the like of these clear plastic non-blowback super low cost Airsoft pistols. But after playing around with it for a bit I could really see how a first time Airsoft buyer could really enjoy the Umarex P99 Compact Clear Spring Airsoft Gun. It shoots just fine and costs next to nothing to buy and shoot. And I know there are many younger folks that watch my video reviews and perhaps their parents may be sitting on the fence about allowing them to buy an Airsoft gun out of fear that so many of them look so real. The Umarex P99 Compact Clear Spring Airsoft Gun clearly looks like an Airsoft gun which makes it pretty hard to get in trouble with yet you can still enjoy the Airsoft shooting experience without freaking your parents out!
My Vimeo Video Review for the Umarex P99 Compact Clear Spring Airsoft Gun:
This Vimeo Unboxing Preview Video focuses on two AR M4 styled AEG Airsoft Rifles. The G&G CM16 Rifles are all pretty much the same other than the barrel lengths and come in the following versions, the CM16 SRS, CM16 SRL and CM16 SRXL. I also showcase the Umarex HK M27 which is distributed by Umarex but made by VFC which is knwo for their high quality products. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG AR M4 rifle.
This Unboxing Preview Video focuses on three Bullpup designed AEG Airsoft Rifles. The two Steyr Aug Bullpups are distributed through ASG while the IWI Tavor 21 is distributed via Umarex. In this Unboxing Preveiw video I take each gun out of the box and go over some basic specification and show you around each AEG Bullpup Rifle a little bit. I will be following up this Preview Unboxing Video with individual more detailed Review videos for each AEG rifle.
Here are some of the basic Specifications for each AEG Airsoft Rifle.
It's been a great year for Replica Airguns and I wanted to share with everyone some of my favorites that I reviewed this year. In this Vimeo Video I show some of my top Replica Airgun picks for 2016 and talk a little bit about each one and what I like about it.
Here is a list of the Replica Airguns in this lineup:
